Scribd
Upload
55 views1 page

Function Phase Overcurrent: Setting SG1 SG2 SG3 S

The document contains diagnostic log information for a function phase overcurrent setting. It lists settings for direction, VT fail action, harmonic operating value, harmonic cross blocking, stage 1 operation, harmonic operation for stage 1, direction for stage 1, stage 1 operating value, stage 1 cold load multiplier, and stage 1 time delay. Stage 2 is also listed but no values are provided.

Uploaded by

Paulo Mandinga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views1 page

Function Phase Overcurrent: Setting SG1 SG2 SG3 S

The document contains diagnostic log information for a function phase overcurrent setting. It lists settings for direction, VT fail action, harmonic operating value, harmonic cross blocking, stage 1 operation, harmonic operation for stage 1, direction for stage 1, stage 1 operating value, stage 1 cold load multiplier, and stage 1 time delay. Stage 2 is also listed but no values are provided.

Uploaded by

Paulo Mandinga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

11/06/2019 HMI

Diagnostic

Log

Function Phase Overcurrent

Setting SG1 SG2 SG3 S

Direction
45.000 deg 45.000 deg 45.000 deg 45.0
Angle
VT Fail
BLOCK BLOCK TRIP TRIP
Action
Harmonic
0.200 0.200 0.200 0.20
Op Value
Harmonic
OFF OFF OFF OFF
Cross Blk
St1
OFF OFF OFF OFF
Operation
St1
Harmonic OFF OFF OFF OFF
Op
St1
NON-DIR NON-DIR NON-DIR NON
Direction
St1 Iop 0.820 1.000 4.000 4.00
St1 Cold
1.000 1.000 1.000 1.00
Load Mult
St1 Top 1000 ms 1000 ms 0 ms 0 ms
St2

11.1.1.119/welcome.html 1/1

You might also like