Scribd
Upload
183 views2 pages

Material Data Sheet For Silicone Rubber Profile Gasket: Sketch of Transparent Profile

This document provides information on a silicone rubber profile gasket material. It lists the material's compliance with FDA regulations for food contact. The gasket can withstand temperatures from -60°C to 250°C and is compatible with foods containing fats and water. Physical properties of the material include a hardness of 60-70 Shore A, minimum tensile strength of 95 kg/cm2, elongation at break of at least 300%, and compression set below 25% after aging at 175°C for 20 hours.

Uploaded by

Sreesanth Saruvil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
183 views2 pages

Material Data Sheet For Silicone Rubber Profile Gasket: Sketch of Transparent Profile

This document provides information on a silicone rubber profile gasket material. It lists the material's compliance with FDA regulations for food contact. The gasket can withstand temperatures from -60°C to 250°C and is compatible with foods containing fats and water. Physical properties of the material include a hardness of 60-70 Shore A, minimum tensile strength of 95 kg/cm2, elongation at break of at least 300%, and compression set below 25% after aging at 175°C for 20 hours.

Uploaded by

Sreesanth Saruvil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

MATERIAL DATA SHEET FOR SILICONE RUBBER PROFILE GASKET

SKETCH OF TRANSPARENT PROFILE

 The Silicone profile gasket complying with FDA-21 CFR 177.2600


 The compound is compatible with any food containing fats & aqueous.
 Withstanding Temperature Range = -60° C to +250° C

R-1, sai krupa niwas,Opp. Kamlakar bhandari house, Charkop Village, Kandivali (w),Mumbai-400067.
Email- himsanpolymer@gmail.com, info@himsanpolymer.com Web:-www.himsanpolymer.com
Mob:-07715871509 / 10

VAT NO-27541048318 V CST NO-27541048318 C


PHYSICAL PROPERTIES SPECIFICATIONS

• Hardness, Durometer A 60 - 70
• Tensile Strength, Kg/cm² 95 (min.)
• Elongation @ Break, % 300 (min.)
• Tear Resistance (Die B), N/mm 32 - 50
• Compression Set % 20 Hrs.@175°c 15 – 25(max)

Heat Ageing 22 Hrs. @ 200° C,

• Hardness, Durometer A ± 5 Shore A


• Tensile Strength, Kg/cm² ± 10 %
• Elongation @ Break, % ± 10 %

R-1, sai krupa niwas,Opp. Kamlakar bhandari house, Charkop Village, Kandivali (w),Mumbai-400067.
Email- himsanpolymer@gmail.com, info@himsanpolymer.com Web:-www.himsanpolymer.com
Mob:-07715871509 / 10

VAT NO-27541048318 V CST NO-27541048318 C

You might also like