Tools

with character !

Edition 1/2016
 Visible and tangible quality.
Made for technology enthusiasts.

Page/Pages

Handheld tools 230V 3 – 13

Handheld tools 12V and mains adapters 14 – 19/

30

Accessories for handheld tools 18 /

(drill stand, flexishaft, etc.) 20 – 21

Bits and cutters of industrial and dental (rotating) 22 – 27

quality

Other precision tools and equipment 28 – 29

for delicate work

Lightweight to middleweight bench tools 31 – 51

(with equipment-related accessories)

Lathe and milling systems, 52 – 65

including accessories

Mill/drill system with 43mm-collar

66

Accessories for mill/drill units with 67

43mm-collar
Modellbauer

Handbuch für
kreative Modell
bauer
buch für kreative

Guide for creative model makers 49

Grundwissen,
Anregungen,
Tipps, Tabellen

Our website www.proxxon.com offers an instructional video for the articles marked
with this symbol. Come have a look !

For PROXXON INDUSTRIAL hand tools there is a separate 34 page catalogue available,









which we will forward to you free of charge. Please send your request to the address on
the back of this catalogue.

2
 Multiversatile equipment for delicate projects. Precise and quiet.
With quick change chuck for 0.3 – 3.2mm shanks.

Precision drill/grinder FBS 240/E

Strength comes from quality!

For drilling, milling, grinding, polishing, cleaning, carving

and engraving.
The maximum speed of 22,000rpm is continuously variable
down to 5,000rpm. The full wave electronic speed control results
in virtually constant torque, even at lower speeds, in turn facilitat-
ing micro drilling, cleaning and polishing. The spindle runs in a
precision ball bearing and is lifted with a lock button. The 20mm
collar fits MICROMOT drill stands and vices.
The machine is fitted with a special, balanced, low noise DC
motor with high life expectancy. Stable housing of glass-fibre
reinforced POLYAMIDE with soft components in the finger grip
area.
Complete with 43 quality inserts in a sturdy plastic case.

Technical data:
5,000 – 22,000rpm. Maximum power consumption 100W, 230V.
Length 200mm. Weight 450g. Insulated according to class 2
requirements. Keyless chuck with 0.3 – 3.2mm capacity.

NO 28 472

Note:
Stable housing of glass-fibre
The FBS 240/E may also be fitted with the optional
reinforced POLYAMIDE with soft
MICROMOT steel collets (see page 22).
components in the finger grip area.

0 6 0 1240
00

Design Patent
Al l

N
XO

igh
r

ts by PROX

Note:
You will find the new super slim MICROMOT 230/E with a
diameter of 37mm weighing just 270g on page 13.

Complete with 43 high-quality bits

and cutters in a durable polypropylene case.

3
 Precision electrical tools with
Elektro-Feinwerkzeuge. Echteeven
Einhandgeräte.
more power:Mit
TheGehäusekopf
2nd generation
of
ausour tools with gear
Alu-Druckguss. headpräzise
Leise, made of die-cast
und aluminium.
effizient!

Professional drill/grinder IBS/E

• For drilling, milling, grinding, polishing, cleaning, • For precision mechanics, model builders, jewellers,
cutting, carving, engraving and signing. opticians, artists and electronic enthusiasts.

Double-row ball bearing. Spindle of Quiet, powerful 100W motor with full
ground steel with lock button for wave electronics for speeds between
rapid cutter changing. 5,000 and 22,000rpm.

Quality without compromise:

Streamlined head of die-cast aluminium for isolation according to class 2
exact bearing seats and optimal stability. requirements.

With 34 bits and cutters of industrial quality, all shafts

Ø 2.35mm. Complete with six triple slit steel collets covering
1 to 3.2mm (see page 22).

High concentric accuracy (maximum runout 3/100mm). No runout in your bits and cutters.
This high-revving, special balanced, low noise DC motor has full- Technical data :
wave electronic speed control. The ground steel spindle runs in a Speed 5,000 to 22,000rpm. Power consumption (max) 100W, 230V.
ball bearing. Six high concentricity MICROMOT collets, (1 – 1.5 – 2 – Stable head of die-cast aluminium and main housing of glass-fibre
2.4 – 3 and 3.2mm and closure reinforced POLYAMIDE. Length 230mm. Weight approx. 500g.
nut) are included. Insulated to class 2. The 20mm MICROMOT collar allows fitting of
optional drill stands, horizontal stands, etc. Supplied with 34 bits and
cutters in a stable plastic case.
NO 28 481

0 2 4 8174
00
Note:
Design Patent
MICROMOT steel collets are hardened and thus have a high, consistent
Al l

N
XO

igh

flexibility. 1 They also maintain prolonged accuracy, even after regu-

r

ts by PROX

lar use (these collets should not be compared with unhardened, four-
slit collets of brass and aluminium). The triple slit collet is substantially
more difficult to manufacture than the four-slit type,
2 but offers a better load- bearing surface. 1
This is especially important for 3
cutters with small shaft diameters. 3 2
Also see page 22. Storage case of high-grade polypropylene. Attractive design,
very sturdy and large enough to put the machine back in the case after
completing work, without having to “fumble”.
A label on the side identifies the contents.

4
 Long500
Nur andg slender
schwer.spindle
Bohrt spielend
neck forStahl
working
bis 5,0
in tough-to-reach
mm. areas
Ideal auf Montage,
(including hollow forms).
für die Werkzeugkiste und Werkbank.

Long neck angle milling/drilling unit LWB/E

With a set of gears running on several ball bearings in a sta- With MICROMOT hardened steel collets
ble, die-cast aluminium housing head. (1 – 1.5 – 2 – 2.4 – 3 and 3.2mm).
Also suitable for right-angled separation of rods. With a special Technical data:
balanced, powerful, quiet and long-lasting DC motor. Infinitely 230V. 100W. 3,000 – 15,000rpm. Length
variable rpm (full wave electronics). Main housing is made of 270mm. Weight 550g. Insulated to class 2.
glass-fibre reinforced POLYAMIDE.
Safely stored in an attractive and extremely stable case made
from high-grade polypropylene, as described on the left. NO 28 492

/ 0 7750
DM 0

Bit holder for storing rotating bits and

Long neck straight drill/grinder LBS/E Design Patent
cutters is included in the delivery.
Al l

N
XO

igh
r

ts by PROX

Head of die-cast aluminium with 75mm long spindle neck (and 20mm Safely stored in an attractive and extremely stable case made
MICROMOT collar). from high-grade polypropylene, as described on the left.
Ideal for internal grinding and the use in slots and channels. Special
balanced, powerful, quiet and long-lasting DC motor. Variable Technical data:
(full wave) electronic speed control; main 230V. 100W. 5,000 – 22,000/min. Length 300mm. Weight 630g.
housing of glass-fibre reinforced POLYAMIDE. Insulated to class 2.
MICROMOT collets (1 – 1.5 – 2 – 2.4 – 3 and
3.2mm). NO 28 485

The heart of our MICROMOT precision tools for 230V is a comparatively more expensive direct
current (DC) special motor.

In relation to its size, the permanent magnet technology makes it very powerful, quiet
and long-lasting. Due to its very high efficiency, this motor requires considerably less
power for the same power output from the socket outlet than other commonly used
motors.

Of course, when utilizing these motors our first concern is to produce small, slender tools
with high performance. The outstanding ratio of current consumption:power output also
contributes significantly to energy saving, thereby also protecting our environment !

5
 The long, slim head of die-cast aluminium makes the LHW ideal
in numerous applications including detailed sanding.

Long neck angle grinder LHW DM

/ 0 7750
0

Design Patent

Al l

N
XO
igh

r
ts by PROX

For working steel, non-ferrous metals, glass, ceramics, wood Technical data:
and plastic. For cutting, rough-machining, grinding and carving 230V. 100W. 15,000rpm. Disc diameter 50mm with 10mm interval.
wood. Special balanced, powerful, quiet and long-lasting DC motor. Length 270mm. Weight 550g. Run down time less than 1 second.
Stable head made of glass-fibre reinforced POLYAMIDE. A corundum Insulated to class 2.
grinding disc (grit 60), a fan sanding disc (grit 100) and a reinforced
cutting disc are included. Safely stored in an attractive and extremely
stable case made from POLYPROPYLENE. NO 28 547

Backing disc for LHW Corundum grinding disc for LHW

Self-adhesive type, for use with corundum bound sand- Used for de-burring, grinding, sharpening and de-
ing discs and sanding fleece. Ø 50mm. rusting steel and non-ferrous metals. Ø 50mm.
NO 28 548 1 piece NO 28 585 60 grit

Corundum sanding disc for LHW Silicon carbide grinding disc for LHW
Self-adhesive type, used on flat and convex surfaces. Used on hard materials such as glass, stone, ceramics
Ø 50mm. and even hardened steel. Ø 50mm
NO 28 549 80 grit 12 pieces NO 28 587 60 grit
NO 28 550 150 grit 12 pieces
Corundum fan sander for LHW
For grinding tempered cast iron, cast iron, stainless
steel, non-ferrous metals, wood and plastic. Low wear-
Sanding fleece for LHW resistant. Ø 50mm.
Self-adhesive type, used for cleaning, matting and san- NO 28 590 100 grit
ding of steel, stainless steel and non-ferrous metals.
Also used for paint removal. Ø 50mm.
NO 28 554 medium 5 pieces Corundum bound cutting disc for LHW
NO 28 555 fine 5 pieces With woven reinforcement. 50 x 1 x 10mm. For cutting
steel, non-ferrous metals, plastic and wood. Ø 50mm.
NO 28 155 5 pieces

Rasp plate with metal burrs made from wolfram

carbide for LHW
0 2 4 8174
00

Design Patent
Al l

N
XO

igh
r

ts by PROX

For model-making, cleaning and smooth-

ing of wood, plastics and glass-fibre
reinforced objects. No expenditure of
effort is needed, easy and precise hand-
ling. Ø 50mm.
Not suitable for metal processing. Storage case of high-grade polypropylene. Attractive design,
very sturdy and large enough to put the machine back in the
case after completing work, without having to “fumble”.
NO 29 050 A label on the side identifies the contents.

6
 Small, torque resistant, solid and versatile.
Die-cast aluminium head for high stability!

Belt sander BS/E

For shape finishing, mortising, fine polishing (flat surfaces). Also Technical data
for de-burring metal, paint removal and fine finishing. 230V. 80W. Belt size 10 x 330mm (usable sanding area 10 x 110mm).
Head of die-cast aluminium for high stability and precise ball bearing Belt speed 225 – 450rpm. Length 350mm. Weight 650g. Insulated to
fitting. Main housing made of class 2.
glass-fibre reinforced POLYA- NO 28 536
12 VA
12
12 VA
VA

kgfjk
g
dsgj l f
3 VA

V sdgb d dgfd
3 VA döfjd

12 dgj lg
döjfk a dlg,d
j

dlfid

12 VA
12
12 VA
VA

kgfjk
g

MIDE.
dsgj f
3 VA

V sdgb d dgfdl
3 VA döfjd

12 dgj lg
döjfk dlg,d
j

dlfida

Variable (full wave) electronic

speed control. The head rotates Replacement belts for BS/E
through 60°. Complete with 2
off 80 and 2 off 180 grit belts.
Safely stored in an attractive and extremely stable case made from
high-grade polypropylene, as described on the left.
Corundum on tear-resistant, woven backing. Sands metal, non-
ferrous metals, wood and plastics efficiently. 10 x 330mm.

NO 28 583 80 grit 5 pieces

NO 28 582 120 grit 5 pieces
The head rotates through 60 °. NO 28 581 180 grit 5 pieces

Identical with the foregoing item, but with burrs made from sili-
con carbide for grinding and de-burring of glass and ceramics. Also
suitable for grinding brass, steel and cast iron.
NO 28 579 180 grit 5 pieces

Super jig saw STS/E

Note:
The alternative 12V jig saw
STS 12/E is described on page 16.

This unit offers fantastic and precise cutting

capacity. Stable head of die-cast zinc for precise fitting.
Jig saw blades made of special steel
The housing head is made of glass-fibre reinforced POLYAMIDE.
Pitch of 1.5mm, teeth ground and set. Usable on hard and soft woods,
Special balanced, low noise DC motor with high life expectancy. The
plywood, fibreglass reinforced sheets as well as soft plastics. Fits
stroke speed is variable by means of full wave electronic speed control.
STS/E and STS 12/E.
Footplate adjustable up to 45° for mitre cuts. Ideal for tight curves in
NO 28 054 Pack of 2
wood (up to 12mm), PC cards to 5mm and non-ferrous metals to
3mm. Complete with 4 Super-Cut sawing blades of various pitches
for wood, plastic and metal. Safely stored in an attractive and Jig saw blades made of HSS
extremely stable case made from high-grade polypropylene, as Tooth pitch of 1.06mm, with teeth set and ground. Usable on metals,
described on the left. non-ferrous metals, aluminium and softer alloys, fibreglass, Plexiglass
Technical data: and insulating materials. Fits STS/E and STS 12/E.
230V. 80W. Stroke speed of 2,000 – 4,500/min. Length 230mm. Weight NO 28 056 Pack of 2
700g. Insulated to class 2.
NO 28 530
7
 Due to is unique oscillating motion also ideal for cutting, where
round and rotating saw blades cannot be used.

Delta sander OZI/E

Head of die-cast zinc, ensuring exact

and stable housing for the moving parts.

Sanding area 65 x 65 x 65mm

with gummed pads allows quick
changing.

Small yet efficient sander ! The oscillating motion ensures lack of vibration and
For grinding surfaces in very tight spots, e.g. corners, sides and in- kickback and allows the fitting of cutting blades tool !
accessible areas. The oscillating motion ensures quiet operation and
also facilitates cutting. Insert and file! The variable speed facility ensures
the correct speed for every material. Special, balanced, low noise DC
motor with high life expectancy. Main housing of glass-fibre reinforced
POLYAMIDE. Supplied with an HSS plunge saw blade (width 14mm)
and 10 each sanding pads of 80, 150 and 240 grit. In an attractive case,
as described on the right.
Technical data: 00
0 2 4 8174

230V. 80W. Sanding frequency of 5,000 – 12,000rpm. Length 230mm. Design Patent

Weight 550g. Insulated to class 2.

Al l

N
XO

igh
r

ts by PROX

NO 28 520
Storage case of high-grade polypropylene. Attractive
design, very sturdy and large enough to put the machine
back in the case after completing work,
without having to “fumble”. A label on
the side identifies the contents.
An HSS plunge saw blade (width 14mm) is included.
For square precision cuts in wood,
plastics and aluminium.

The OZI/E cuts in those cases where a rotating saw blade can For precision square excavations, HSS immersion saw
no longer be used (in this case using the HSS separation blade, blades are available with an 8 and 14mm width of cut.
see p. 9).

8
 Compact, light and well balanced. With an extra
powerful drive for a high material removal capacity.

Sanding pads for OZI/E Belt Sander BBS/S

High durability corundum (aluminium oxide)

pads. Grain filled with special filler to prevent
premature clogging. Deposited on special
backing paper. Self-adhesive.

NO 28 891 80 grit 25 pieces

NO 28 893 150 grit 25 pieces
NO 28 895 240 grit 25 pieces

HSS cutting blade for OZI/E Powerful special DC motor, quiet and long-lasting.
Left-justified band grinder, making it possible to process surfaces ‘right to the corner’. Fine adjust-
Oscillates, making ment of rollers prevents lateral rolling off. Easy replacement of bands by means of a spring tensi-
it ideal for cutting on system without the use of tools. Housing is made
metal, wood, PC of glass-fibre reinforced POLYAMIDE. Complete with
cards, plastics, screw clamp and with 5 x 150 grit and 240 grit grin-
plaster of Paris ding bands.
and many other Supplied in a practical case as described on page 8.
materials.
The segment cut Technical data:
facilitates exact cutting right into corners. 230V. 150W. Grinding band 40 x 260mm. Grinding
surface 60 x 40mm, band speed 160m/min. Length
NO 28 900 ø 65mm, 160 teeth 175mm. Weight 700g. Class 2 insulation.
The BBS/S is also intended for
NO 28 526 stationary use. A screw clamp
is included.
Diamond cutting blade for OZI/E
Grinding bands made from high-quality corundum (aluminium oxide)
Operation as Mounted on a high-performance support. For the grinding of metal,
described non-ferrous metals, wood and plastics. 40 x 260mm.
above for the
HSS blade. Cuts NO 28 922 80 grit 5 pieces
marble, bricks, NO 28 924 150 grit 5 pieces
dry walling and NO 28 928 240 grit 5 pieces
many other
materials. Ideal
for interior finishing and sanitary and electri-
cal installation.
MICROMOT tool holder
NO 28 902 ø 65mm
For stationary use of MICROMOT electrical precision
tools with metal head in combination with a vise.
HSS immersion saw blades for OZI/E
Especially suited for industrial drill/grinder IBS/E,
For exact square excava- belt sander BS/E, longneck angle grinder
tions and other forms. For LHW, super jig saw STS/E and delta sander
making hatchways and OZI/E. Made of glass-fibre reinforced POLYAMIDE.
windows in ship and aircraft
models. Cuts wood, ply- NO 28 410
wood, plastics and alumini-
um. Max. immersion depth
16mm.

NO 28 897 Saw blade width 8mm

NO 28 898 Saw blade width 14mm
9
 For joiners, model makers and wood carvers.
With die-cast aluminium gear head.

Motor-driven carving device MSG

Three Japanese knife inserts of

bimetal (hand-ground) are included.

For the carving of all types of wood. For the restoration of furni- and flat blade) are included. In an attractive and extremely stable case
ture. For the restoration of antiques. For linocuts and precision made of high-grade polypropylene.
paint removal. Technical data:
It is also possible to process plaster. Special, balanced, low noise DC 230V. 50W. Stroke speed 11,000rpm. Length 230mm. Weight 680g.
motor with extreme high life expectancy. Gear head made of die-cast Class 2 insulation.
aluminium. Main housing of glass-fibre reinforced POLYAMIDE. Three
high-grade Japanese knife inserts made from bimetal (U-form, V-form NO 28 644

0 2 4 8174
00

Design Patent

Storage case of high-grade polypropylene. Attractive Note:

Al l

N
XO

igh
r

ts by PROX

design, very sturdy and large enough to put the The wolfram carbide rasp plate is ideal
machine back in the case after for wood carvers and used in connection
completing work, without having to with our long-neck angle grinder LHW. Offer on page 6.
“fumble”. A label on the side identifies
the contents.

Multiform grindstone Replacement carving blades for MSG

For the Proxxon carving blades. Profiled Super-quality bimetal (Made in

for blade shapes. A pure oilstone for really Japan). Base steel (carrier materi-
sharp carving tools. al) is bonded with extremely hard
tungsten steel. The tips are hand-
ground piece by piece. One blade
each in V-shape, rounded large
and small as well as flat straight
and rounded.
NO 28 578 100 x 63 x 15mm NO 28 572

10
 Of die-cast aluminium. With plane-milled bearing surface.
For MICROMOT units with standard 20mm collar.

Router base OFV

For slotting, milling grooves and milling edges.

Regardless whether with parallel limit stop (maximum throat 150mm), for circular milling with cent-
ring pin (100 - 400mm) or freehand. Adjustable depth control with preselectable stroke. Ideal also as
drilling guide for round parts through prism in the guiding plate.

NO 28 566

Tungsten carbide router cutters 10-piece wood router cutter set

Carbide cutters. For wood, fibre boards and plastic. Clean
For wood, fibreboard and plastics. Clean relief grinding for good relief grinding ensures good work results and surface qua-
work results and surface quality. High stability. Shafts 3.2mm. lity. High stability. All shafts 3.2mm.

NO 29 020
NO 29 024 slot cutter Ø 3.2mm 1

NO 29 026 slot cutter Ø 4.3mm 2

NO 29 028 slot cutter Ø 6.5mm 3

NO 29 030 Rounding over cutter Ø 6.4mm 4

NO 29 032 V-slot cutter Ø 6.5mm 5

NO 29 034 Combi cutter 6.5/2.5mm 6

NO 29 036 Core box bit R 3.2mm 7

NO 29 038 Rebating cutter 6.4mm 8

NO 29 040 Edge cutter with pin 5mm 9

NO 29 044 Angle cutter 45° 10

1 2 3 4 5 6 7 8 9 10
6,5

4,3 45°

11
 Continuously variable speed control for low and constant speeds
even at high contact pressure.

WP/E Angle Polisher

Packed in storage case, including extensive

original equipment for immediate use.

For perfect surfaces even in tight spots: For finishing of

blank surfaces, cleaning, rust removal, for the „finishing
touches“ after varnishing.

Balanced special motor, powerful, quiet and long-lasting. Quiet

planetary gear in die-cast aluminium housing and continuously va-
riable speed control (full-wave electronics) for low and constant speeds
even during high contact pressure.

Main housing of glass-fibre reinforced POLYAMIDE with soft component. Se- 8 187
/0
DM 2
curely stored in stylish case made of high-grade polypropylene with original
equipment for immediate use. Rubber backing disc with hook and loop fastening, Design Patent

Al l

N
XO
polishing sponge (medium hard), lambswool polishing disc, polishing felt for metals igh

r
ts by PROX

and non-ferrous metals (medium hard), 12 sanding discs K 2000 and NIGRIN polishing
emulsion (75ml) as well as a microfibre cloth.

Technical data:
230V. 100W. 800 – 2,800rpm Length 270mm. Weight 720g. Insulated to class 2.

NO 28 660

Accessories for the angle polisher WP/E

Rubber backing disc Polishing felt, medium hard

For use with polishing sponge, lambswool poli- For polishing metals (e.g. stainless steel, brass and
shing disc, felt disc, sanding discs and sanding copper). With hook and loop fastening. Ø 50mm.
fleece. With hook and loop fastening. Ø 50mm.
.
NO 28 548 1 piece NO 28 666 2 pieces

Polishing sponge (blue = medium hard) Super-fine sanding discs grain 2000
For applying the polishing emulsion to painted Of silicon carbide. For adding finishing touches
and metal surfaces with subsequent polishing. to paint or removing varnish runs and inclusions.
With hook and loop fastening. Ø 50 x 25mm. With hook and loop fastening. Ø 50mm.

NO 28 662 2 pieces NO 28 670 12 pieces

Lambswool polishing disc Microfibre cloth

Of high quality, dense lambswool for polishing For final cleaning of polished surfaces. Finely mes-
scratch-proof paints. With hook and loop fastening. hed and without seam.
Ø 50mm. 20 x 20cm.

NO 28 664 2 pieces
NO 28 678 2 pieces

12
 With a diameter of 37mm and just 270g it offers convenient
handling second to none in its class !

MICROMOT 230/E
/ 0 8301
DM 2

Design Patent

Al l

N
XO
igh

r
ts by PROX

For drilling, milling, grinding, polishing, brushing, cutting, locked at the push of a button. 20mm standard collar for use with
and engraving. The extremely slim housing (of glass-fibre MICROMOT drill stands and horizontal stands. Includes steel
reinforced POLYAMIDE) with a soft component grip area collets (1 each of 1 – 1.5 – 2 – 2.4 – 3 and 3.2mm).
enables the unit to be handled with two fingers (pen grip).

Balanced DC special motor. Quiet and extremely long-lasting. Technical data:

The maximum speed of 22,000rpm can be continuously reduced 230V. 80W. 6,000 – 22,000rpm.
to 6,000rpm through full-wave electronics. Offering nearly the Weight 270g. Insulated to class 2.
same torque in the lower speed range. This is especially impor-
tant during micro drilling, brushing and polishing. NO 28 440

Ground, ball-bearing spindle. High quality MICROMOT steel collets:

Even the smallest shafts are accurately clamped. No rattling or
vibrating of bits and cutters. Spindle for tool exchange can be

MICRO-Cutter MIC

For cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foils and similar materi-
als. With 0.5mm cutting width. DM
073124

Slim and light: A diameter of just 36mm makes the ergonomically shaped casing easy to handle. A powerful Design Patent

Al l

N
XO
igh
DC special motor in this compact device ensures an astonishingly high cutting performance. r ts by PROX

With screwdriver for saw blade replacement.

Technical Data:
230V. 40W. 20,000rpm. Maximum cutting depth 4mm. Cutting width 0.5mm.
Weight approx. 300g. Insulated to class 2.

NO 28 650

Replacement cutting disc for MICRO Cutter MIC

Made of spring steel (hardness 55 HRC). With
cleanly ground crossed teeth.
23 x 0.3mm. With 2.6mm bore.

NO 28 652

Diamond-coated cutting disc for MICRO Cutter MIC

With cooling holes: For cutting porcelain, ce-
ramics, plastics, glass fibre reinforced plastic
and PC cards. Important:
23 x 0.6mm. With 2.6mm bore. The MIC makes it possible to „immerse“ in the
work piece surface (e.g. for cut-outs). The cutting
NO 28 654 disc guard moves up automatically during cutting.

13
 Precision milling/drilling machines MICROMOT 50 and 50/E. Ball
bearing spindle and high-quality collets for efficient insertion of tools.

MICROMOT 50 and 50/E

12
VOLT

• For milling, drilling, grinding, polishing, brushing, cleaning, • Ideal for electronic hobbyists, model-builders, mechanics,
de-rusting, cutting, engraving, signing. jewellers, opticians, artists, chiropodists, dental technicians,
tool and casting makers, etc.
• For working steel, precious metals, glass, ceramics, plastics • 12V supply allows the safe use of coolant
and precious stones. (wet grinding and cutting)!

Stable housing of glass-fibre

reinforced POLYAMIDE. With a soft
component in the finger grip area. The standard 20mm collar allows use
in the drill stands MB 140/S and MB 200
as well as in the universal holder UHZ.

The tens of thousands of these units in use speak for themselves: they are a joy to use!
With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor
with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear. The high-quality MICROMOT steel collets (see page
4) ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters. The size of the machine dictates a 12V drive system,
use of a mains adapter of at least 1A is thus required. We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E (see page 19).

Mill/drill unit MICROMOT 50/E Mill/drill unit MICROMOT 50

Variable speed control from 5,000 – 20,000rpm. Without electronic speed control (continuously 20,000rpm).
Special balanced, low noise DC motor with high life expectancy. Other technical specifications and design as the above mentioned
Variable electronic speed control with feedback effect (high engi- MICROMOT 50/E.
ne power also at lower speeds). High precision due to ball bea-
ring spindle. Housing of glass-fibre reinforced POLYAMIDE with NO 28 500
soft component in the finger grip area. 20mm-collar for fitting
MICROMOT accessories. Six MICROMOT steel collets (one each of
1 – 1.5 – 2 – 2.4 – 3 and 3.2mm) are included.

Technical data: Direct voltage 12 – 18V. 40W. 5,000 – 20.000rpm.

Length 220mm. Weight 230g.
NO 28 510

Protective device for hand-operated MICROMOT machines with standard 20mm collar

For work with saw blades, cutting discs, milling bits, grinding
tools, steel brushes and polishing tools. Maximum useable tool
diameter 22mm. Easy to assemble.

NO 28 944
14
 The 50/EF with quick-action chuck.
Practical for use with different shaft diameters.

Note: MICROMOT 50/EF

12
VOLT
The MICROMOT 50/EF can also be used with MICROMOT steel clamp-
ing devices. This is recommended when milling
continuously at high lateral pressure. This makes it Quick-action chuck of 0.3 – 3.2mm. Primarily
impossible for the shafts to become loosened after advantageous when working with HSS drill bits
prolonged working. Using clamping devices makes of different power, complying with DIN 338.
true running better than using the quick-action chuck.

20mm-system adaptation. For flange

mounting of MICROMOT accessories.

MICROMOT extension cord. 300cm.

Stable housing made of glass-fibre reinforced
POLYAMIDE. With a pleasantly soft handle.
For all 12V machines. Plug
and wall-socket reverse pola-
rity-protected.

NO 28 992

Footswitch FS Slim, easily handled and light.

For free-hand precision work . Quick-action chuck and electronic revo-
lutions adjustment, with feedback effect
For all machines with a Euro (high engine power in the lower revolu-
plug (class 2 insulation) and tions area). Special, balanced, low noise
maximum power absorption DC motor with high life expectancy. A
of 500W. Ideal for both porta- transformer is required for operation.
ble and stationary machines. We recommend MICROMOT network
Housing of glass-fibre rein- devices from 1A.
forced NYLON. The connec-
ting cord (230V) is 250cm in Technical data:
length and the output cord Direct voltage 12 – 18V. Power absorp-
50cm. The transformer is con- tion up to 40W. 5,000 – 20,000/min.
nected to the FS when using Length 220mm. Weight 230g.
12V machines.

NO 28 700 NO 28 512

Model building and engraving set. Complete with MICROMOT drill/grinder 50/E,
mains adapter and 34 bits and cutters of dental quality.
12
VOLT
MICROMOT drill/grinder 50/E (as described on the left). The set includes 34 industrial respectively
dental quality bits and cutters:
1 diamond grinding bit, 1 fine miller, 0.5 and 1mm micro-drills, 1 brass brush, 4 high-grade corundum grinding
bits (cylinder, sphere, disc and cone shaped), 1 polishing pad, 4 grinding wheels (2 corundum, 2 silicon carbide),
20 cutting discs and 1 arbor. The 6 MICROMOT collets ranging from 1 – 3.2mm (description on page 4) are also
included. With mains adapter for 230V operation (12V, 1A).

NO 28 515

Both sets are packed in an attractive plastic case, with 34 industrial

respectively dental quality bits and cutters.
15
 Power and precision also when wet grinding.
Includes keyless chuck (capacity 0.3 – 3.2mm).

Precision drill grinder FBS 12/EF

For precision drilling, milling, sanding, polishing, brushing, de-

rusting, engraving, chiselling and cutting. 20mm MICROMOT standard collar.
Includes keyless chuck (capacity 0.3 – 3.2mm). A precision
ball bearing minimises spindle side play. Spindle lock button
for bit changing obviates the need for spanners. Recessed Efficient forced ventilation cooling
spindle head for inserting MICROMOT steel collets (see page 4). for extended periods of use
Special, balanced, low noise DC motor with high life without power loss.
expectancy. Variable speed control with feedback effect
Balanced DC special
(high engine power in the lower revolutions area). Housing
motor. Powerful,
of glass fibre-reinforced POLYAMIDE.
with high life expectancy.
Technical data:
Direct voltage 12 – 18V. 100W. Stroke 3,000 – 15,000rpm.
Length 185mm. Weight 450g. We recommend the use of
MICROMOT transformers of at least 2A (see page 19). 12
VOLT
Speed control with feed-
NO 28 462 back effect for speeds of
3,000 – 15,000rpm.

Note:
The speed control of our 12 volt devices only works when operated via non-
stabilised power supply units (e.g. all MICROMOT mains adapters). Connec-
tion to stabilised power supply units is possible. However, the devices will
then operate with maximum rotational speeds (also applies to operation
with batteries).

Jig saw STS 12/E

Ideal for curved sawing of wood (up to 10mm), printed circuit

boards (up to 3mm), and non-ferrous metal (up to 2.5mm).
Powerful special low noise DC motor with
high life expectancy. Variable speed control
with feedback effect (high engine power in
the lower speed range). Housing of glass-fibre
reinforced POLYAMIDE. With additional ball
adapter for working on convex and concave
surfaces. Is exchanged for the normal saw
table by unscrewing a screw. Includes 2 saw
blades (coarse and fine).
We recommend MICROMOT mains adapters
12
VOLT
as of 2A for operation.

Technical Data:
Direct voltage 12 – 18V. Maximum power consumption
100W. Stroke 6mm (adjustable from 2,000 – 5,000rpm).
Length 180mm. Weight 480g.

NO 28 534

Jig saw blades can

be found on page 7.
16
 Superfine sander with linear (not rotary) sanding motion.

Pensander PS 13

Ideal for working on surfaces in recesses, slots and small corners. 12

VOLT
Linear (not rotating) stroke. Long-lasting special DC motor. Hou-
sing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with
straight shanks and four angled (all different shapes) as well as
three sheets of pre-profiled self-adhesive sanding pads are included.
The sheets are of grits 180,
240 and 400 with 5 of each
shape per sheet.

Technical data:
Direct voltage 12 – 18V.
8,000 linear strokes/min.
(2.5mm stroke length).
Length 160mm. Weight
130g.

NO 28 594 Additional sandpaper for PS 13

Three sheets, each with 20 pads in different shapes. Silicon carbide,
self-adhesive.
Note: NO 28 822 180 grit
For operation a mains adapter of at least 1A is required. We recommend NO 28 824 240 grit
MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E (see page 19). NO 28 826 400 grit

MICRO screwdriver MIS 1

With pre-selectable torques of 0.35 - 2Nm. Technical data:

Small, light and easy to handle. An ideally positioned rocker switch Direct voltage 12 – 18V. 50W. Torques of 0.35 – 1Nm (the sixth
provides on/off/reverse. A chuck facilitates acceptance of all bit stage bypasses the clutch and yields approx. 2Nm). Length 200mm.
shanks of up to 6.5mm (also for standard 1/4" bits). Housing of glass Weight 415g. We recommend the use of MICROMOT mains adap-
fibre-reinforced POLYAMIDE. Complete with 16 inserts of chrome ters of at least 2A.
molybdenum steel. NO 28 690

The depicted mains adapter MICROMOT NG 5/E

is not included.

12
VOLT

Slot: 0.3 x 1.5 / 0.35 x 2 / 0.4 x 2.5mm

Phillips: Size 0 and 1
Note: TX: T 6, T 8, T 10
The MICRO screwdriver MIS 1 is
Allen key, internal: 3 – 3.5 – 4 – 4.5 – 5mm
eminently suitable to cut threads!
Allen key, external: 1.5 – 2 and 2.5mm

17
 The ideal complete starter kit including the tried and tested
engraving tool GG 12!

Complete engraving kit with “trial glass”. 12

VOLT

Engraving kit GG12 with special balanced, powerful, quiet and long-
lasting DC motor.
Housing of glass fibre-reinforced POLYAMIDE. Plus mains adapter, trial
glass, motifs and instruction booklet as well as all necessary bits: 1 and 1.8mm
diamond grinding bits with spherical head for engraving and line work, sili-
con carbide grinding bits in both conical and bullet shape for frosting glass
as well as one corundum grinding bit in ball and cylinder shape for grinding
and engraving. Including bit holder usable for holding MICROMOT rotating
bits. Complete with mains adapter 0.5A for 230V.

Technical data for GG 12:

Direct voltage 12 – 18V. 20,000rpm. Length 145mm. Weight 50g.
NO 28 635

Engraving tool GG 12, available individually

Includes 1 diamond bit (spherical head, 1.8mm). For operation a mains
adapter is required. We recommend MICROMOT mains adapters NG 2/S
or NG 2/E.
NO 28 592

Every piece has its own place in the attractive,

extremely durable plastic storage case.

MICROMOT flexible shafts with precision aluminium handle.

Optionally available with steel collets or quick-action chuck.

MICROMOT Flexishaft 110/P

Dual ball-bearinged milled steel shaft with tool holder
for MICROMOT steel collets. Ball-bearinged shaft end on
machine. Highly flexible core (does not run hot when
working on tight radii). Length 100cm. For a maximum of
25,000rpm. Includes 6 steel collets (1 – 1.5 – 2 – 2.4 – 3 and
3.2mm).
NO 28 620

MICROMOT Flexishaft 110/BF

As described above, but with 0.3 to 3.2mm quick-action

chuck. Practical when working with different shaft dia-
meters.
NO 28 622
18
 MICROMOT mains adapters: safe and efficient power sources
for MICROMOT low-voltage tools.

MICROMOT mains adapter NG 2/E

Note:
Power consumption of hand-held power tools is measured
according to the internationally accepted ICE-745-1 specifi-
cation. The current drawn is measured, not the power con-
sumption with a hot motor just before stalling. In practice,
this condition seldom appears, if ever. All PROXXON mains
adapters are suitably dimensioned for the recommended
purposes.

The adapters do not include the illustrated mill/drill units.

NORYL casing (heat resistant – a necessity for transformer enclo- Technical data:
sures). 230V. Supplies 2A at 16 Volt open circuit and 12 Volt under load.
Polarised socket for MICROMOT plug. Red LED indicates readiness Weight 1,000g. Class 2 insulation.
for use. PTC (Positive temperature coefficient) element prevents NO 28 707
overload (and plugged in tool will not automatically restart). After
cooling down the mains plug should be disconnected briefly to
reset the adapter. With holes for storing bits. Foldable tool rest pro- MICROMOT mains adapter NG 2/S
vides a secure place for keeping the MICROMOT tools at the ready. Without electronic speed control, otherwise exactly as mains
Variable speed control with feedback effect for adjusting bit speed adapter NG 2/E.
to suit the job, as well as providing high torque at low speeds. NO 28 706

MICROMOT mains adapter NG 5/E

With superior capacity of 5A. In compact NORYL casing
(heat resistant – recommended for transformers).
Variable speed control with feedback effect for optimum tool
speed and high torque at low speeds. Three polarised sockets
for MICROMOT machines. A pair of sockets for standard banana
plugs (4mm diameter) is also supplied. Master switch for turn-
ing off the transformer without needing to unplug. Red LED
indicates ‘ready’. PTC (Positive temperature coefficient) pro-
tection against overload (plugged in machine will not restart
automatically. After cooling down, the mains plug should
briefly be unplugged to reset the adapter). With storage holes
for tools with 2.35mm and 3mm shafts. Foldable tool rest for
the MICROMOT tool.

Technical data:
230V. Supplies 5.0A at 16 Volt open circuit and 12 Volt under
load. Weight 2,000g. Class 2 insulation.

NO 28 704
19
 MICROMOT drill stands made of die-cast aluminium parts.
With CNC-machined guides and fits. A world of difference.

/ 075 5
DM 64

Design Patent MICROMOT drill stand MB 200

Al l

N
XO

igh
r

ts by PROX

Head with dovetail guides can be tilted through 90° (scale ring available).
Enables bevelled drilling and versatile milling operations.

Geared rack and pinion feed with return spring allowing effortless and sensi-
tive operation. Practical drill depth scale with adjustable limit stop (maximum
travel 40mm). With standard 20mm collar for MICROMOT drilling and milling
devices. With solid, hard chromium-plated steel column (280 x 20mm), throat
capacity (column inside to centre of tool) 140mm.

Plane-milled table (220 x 120mm) with parallel limit stop and scale. Drilled,
tapped holes for securing the MICRO compound table KT 70 and holes to fix
the drill stand itself are also provided. Weight 2.2kg.

NO 28 600

Note:
Our designers prefer die-cast aluminium. A refined, rust-proof and statically solid
material. Fittings and feeds are machined on our highly modern CNC-controlled
machines (milled, line-bored, lathed, etc.). Pure precision !

Machine vice MS 4
Die-cast zinc.
With three machined sides. The slot fits the adjustable fence of the drill stands
MB 200 and MB 140/S as well as the bench drill TBM 220.
Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm.
Maximum clamping width 34mm.

NO 28 132

MICROMOT drill stand Universal holder UHZ

MB 140/S
Offers a sensitive feed set-up via drive disc With ball joint. To be rotated and
and ball bearing system. swivelled in all directions.
Throat capacity (column inside to centre of 20mm collar for MICROMOT drilling and milling devices,
tool) 140mm with pinch screws for simple such as FBS 240/E, FBS 12/E,
height adjustment. Travel 30mm. Also IBS/E, LBS/E, MICROMOT
with standard 20mm collar. The 50, 50/E and 50/EF.
mill/drill collar tilts through Made of die-cast ZINC.
90° in both directions. Other With clamp for quick
technical data related to table and and secure fastening
column are the same as for the above menti- to workbenches and
oned drill stand MB 200. table tops up to 60mm
thickness. Alternatively, it can also
be fixed to any workplace with
2 standard screws.

NO 28 606 NO 28 610

20
2
 The KT 70, small and accurate.
Ideal for MICROMOT drill stands and drill press TBM 220.

MICRO compound table KT 70 Step clamps made of steel

Made of solid aluminium with surface treatment and fitted with The step clamps set is supplied with the KT 70, but can also be
adjustable dovetail gibs and three T-slots of the MICROMOT stan- ordered separately. Set consists of 2 step-
dard (12 x 6 x 5mm). Adjustable ruler eases workpiece positioning. ped blocks and clamps, T-slot nuts of the
Both handwheels have zero-resettable dials with graduations indica- MICROMOT standard, bolts. For work
ting 1 revolution = 1mm and 1 division = 0.05mm. The clamps and pieces up to 20mm thickness.
securing bolts for the MB 200, MB 140/S and TBM are included.
NO 24 256
Other technical data:
Table size 200 x 70mm. X travel 134mm and Y travel 46mm,
maximum height 43mm.

NO 27 100 Note:
The MICRO compound table KT 70 is now also
available as KT 70/CNC-ready (with two step-
ping motors for the axes X (transverse) and Y
(lengthwise). You will find it on page 50.
Two step clamps
are included.

Moveable ruler eases workpiece

positioning.
Table of 200 x 70mm
with 3 T-slots.

Handwheels with
adjustable dials
(1 revolution = 1mm,
1 division = 0.05mm).

Precision vice FMZ with integrated clamp

Rotates in all directions. Made of die-cast zinc.
Easily clamps to workbenches and tables of up to 60mm. Alternatively,
use 2 standard screws to secure to the work surface. Ball and socket:
rotates in all directions (even downwards). 75mm jaws with protective
covers (for delicate workpieces). Maximum clamping width 70mm and
weight 1.6kg.

NO 28 608

Precision vice FMS 75

As detailed above, but without clamp.
A strong suction cup facilitates instantaneous fixing to any smooth,
flat surface.

NO 28 602

21
2
Bits and cutters for MICROMOT drills and mills of industrial and dental qua
Wolfram vanadium milling bits

For
non-ferrous 3
10 6 6
metals
plastic
plaster
3 3 2,35 2,35

NO 28 722 NO 28 727 NO 28 725 NO 28 724

Wolfram vanadium steel milling bits Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single
cious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3mm. Ideal for milling, routing, shaping, profiling and slotting. For clean and

HSS drill bits

For 0,5 0,8 1 1,2 1,6

metal
6 44 6 44 8 44 8 44 10 44
plastic
wood

NO 28 864 NO 28 852 NO 28 854 NO 28 856 NO 28 858

HSS drill bits. Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are
manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-
ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35.

Tungsten carbide drills and milling bits

1 1,5 2
1 / 1,2 0,6 / 0,8
For
2,3
steel 8
38 8 38
8 38 2,3 2,3
2,3

30 3 30 3
glass 5
5,0

circuit boards

2,35

NO 28 324 NO 28 326 NO 28 328 NO 28 320 NO 28 321 NO 28 750

Tungsten carbide drills Made of wear-resistant tungsten carbide. For drilling Tungsten carbide milling drills (spear Tungsten carbide
glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The drills). For drilling, milling and cutting Made of wear-resi
hard stones are subdivided according to the degree of hardness from 1 – 10. Tung- fibre glass or PERTINAX circuit boards. secure workpieces
sten carbide can be used up to hardness degree 6. Drilling hard stones with a hard- Also for drilling pearls and similar. Shaft work, for engraving
ness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3. With ideal Ø 2.35.
cutting angle of 6°.

MICROMOT steel collet set

Note:
MICROMOT steel collets are hardened and thus have a high, consistent
flexibility. 1 They also maintain prolonged accuracy, even after regu-
lar use (these collets should not be compared with unhardened, four-
slit collets of brass and aluminium). The triple slit collet is substantially
more difficult to manufacture than the four-slit type,
2 but offers a better load- bearing surface. 1
This is especially important for 3 Triple slit and hardened. 1 each of 1 – 1.5 – 2 – 2.4 – 3
cutters with small shaft diameters. 2 and 3.2. With clamping nut and holder for storage (see
3 note at left).
NO 28 940
22
 Note:
lity All measures are in mm.

5 5 5 2,3
4 8
2,3 3,1 2,3 2,3

6
2,35 2,35 2,35 2,35

NO 28 723 NO 28 726 NO 28 720 NO 28 710

blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for free-hand precision work. For use on hard and soft woods, non-ferrous and pre-
powerful fitting of the milling bits we recommend the use of MICROMOT steel collets as described above See bottom left.

d1
Note:
The term HSS for this tool category comes from
the utilised drill material. High speed steel (HSS)
is a high alloy tool steel extremely resistant to d1
50
wear due to its manufacturing process and is
28 dimensionally stable up to approx. 600°C.
l1

Cutting oil or coolant emulsion should be used as

cooling lubricant, when machining steel. Spirits
l2
or petroleum should be used for aluminium. Nor-
mally, plastic and wood can be dry-machined.
3

NO 28 876 NO 28 874

HSS twist drill set with centring pin Ø 1.5 – 2 – 2.5 – 3 – 3.5 - 4.. For precisi- HSS twist drill in storage case 10-piece set. Similar to DIN 338 Ø 0.3 – 0.5
on tapping of wood and plastics; also non-ferrous metal, steel and stainless – 0.8 – 1 – 1.2 – 1.5 – 2 – 2.5 – 3 – 3.2. For drilling non-ferrous metal, steel
steel sheets. Titanium coating reduces friction and increases service life. and stainless steel. In labelled cassette with fold back and stand function.
Shaft Ø 3, 6-piece set. For clamping we recommend our 3-jaw drill chuck (see below).

3,2
1 2 3
d1 d1 d1
1,2
1,2 2,3
2,3 5
5,0 22
6l 2 l 82 12
l2
44,0
2,1
2,1
50

44l 1 44l 1 44l 1

2,35 3 3 3 3,2
2,35

NO 28 752 NO 28 758 NO 28 759 NO 28 761 NO 28 760 NO 28 757

millers Rasp cutter

stant highlycompressed fine-granular tungsten carbide. Used for vibration-free milling of high accuracy dimensions. It is advisable to For cutting and milling tiles,
well, avoiding accidents. For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical stoneware, wood and plastics.
and milling of PC cards. Shafts Ø 3 or 2.35. Here also we recommend the use of MICROMOT steel collets.

Drill chuck or collet? Three-jaw steel Tungsten milling cutters, 3 pieces

Drill chucks provide more convenience to drill chuck Two flute cutters and a fishtail profile ensure cutting to
quickly change the tools when working the centre, allowing boring. Usable on grey cast iron,
with shafts of varying diameters (e.g. HSS hardened cast iron, steel, cast steel, brass, aluminium,
drills as per DIN 338). However, because glass and even plastics and carbon fibre. One each of
of their technical setup, they have a few 1 – 2 and 3mm. 3mm shaft diameter. Can also be
For all prepared MICROMOT ordered separately (see above).
drawbacks compared to collets: Less
devices. Advantageous when wor-
clamping force and higher concentricity king with different shafts. Capacity
tolerances. If high precision is necessary, 0.3 - 3.2.
then working with MICROMOT steel
collets is a must. See also note at left. NO 28 941 NO 27 116
23
Diamond, cleaning and polishing tools. In professional quality, also for
Diamond tools
0,8 / 1,2
For
glass 1,8
1,8 5
5,0 d11 1,8
d 1
5
d1,2
1
44
ceramics
5
5,0
plastic

NO 28 240 NO 28 250 NO 28 212 NO 28 222 NO 28 255 NO 28 230

Diamond grinding bits With consistently even coating of diamond dust. Bodies and shafts Diamond twist drills Ball-shaped dia
made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome- For drilling holes in (semi) pre- ing and machini
cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35. cious stones, etc. Shaft Ø 2.35. mended for use
of coolant. Shaft
Cleaning brushes

For 8 22 8 13 22
13
steel
brass
stainless steel

NO 28 951 NO 28 953 NO 28 952 NO 28 961 NO 28 963 NO 28 962

Steel brushes, cups and wheels High quality components for best ope- Brass brushes, cups and wheels Ideal for working on brass, brass
ration. For cleaning, removing rust, sanding, frosting, roughening, rounding- alloys, copper, precious metals, semiprecious stones, plastic and
off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35. wood. For cleaning of electronic components and circuit boards.
Shaft of Ø 2.35.

Polishing agents
5 14 22
For 22 22 15
gold 12
3 3
stainless steel
porcelain
6

10x 10x 5x 4x

NO 28 293 NO 28 294 NO 28 288 NO 28 295 NO 28 296

Flexible silicon discs, wheels and bullets Flexible polishing pad set
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, Especially suitable for working gold,
glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach platinum, silver as well as for tool
insides. Shafts of Ø 2.35. making and castings. Shafts of Ø 2.35.

10-piece wood router cutter set

One each: Slot cutter Ø 3.2 – 4.3 and 6.5, roun-

ding over cutter Ø 6.4, V-slot cutter Ø 6.5, Note:
combi cutter 6.5/2.5, core box bit R 3.2, reba-
ting cutter 6.4, edge cutter with pin 5, half The wolfram carbide rasp plate
round cutter Ø 13. Neatly packed in wooden is ideal for wood carvers and as
box. supplement to the motorised carving
You will find individual wood router cutters on machine MSG in connection with our long-
page 33. neck angle grinder LHW. Offer on page 6.

NO 29 020

24
 Note:
jewellers and for the jewellery industry! All measures are in mm.

38 38
20 20
d2,2
1 d3,2
1

NO 28 232 NO 28 234 NO 28 840 NO 28 842 NO 28 844 NO 28 846

mond-coated grinding bits for glass and stone For drill- Diamond cutting discs Diamond-coated cutting discs with cooling holes
ng of glass and types of stone reaching to granite. Recom- Only 0.6 thick. For cutting and sanding of porcelain, For cutting, grinding and deburring. Same appli-
on drill presses with a speed of 2,000rpm with the addition ceramics, glass fibre boards, plastic and non-ferrous cation as described on the left. Less heating up
Ø 2.35. metals. Shaft of Ø 2.35. due to cooling holes. No burn marks! Shaft Ø 2.35.

8 13 22

Note:
Permit the brushes to work only 44
with gentle contact pressure and
at the recommended rotational
speed! If the pressure is too high,
the individual wires will be bent too
strongly and afterwards straighten
up again due to the centrifugal
force. This excessive flexural fatigue
NO 28 955 NO 28 957 NO 28 956 stress of the wires on their seating NO 28 815
promotes the notch effect. They are
Stainless steel brushes, cups and wheels For cleaning, brushing and cleansing prone to breakage ! Spare arbors
stainless steel. Remove cinders and scales on stainless steel welding seams and solde- Shaft 2.35 x 44.
ring points. Can also be used on aluminium and non-ferrous heavy metal. Shaft Ø 2.35.

8 7 16
22 22 22
22
3
15 15

2x 2x 2x 10x 2x 2x 2x

NO 28 801 NO 28 802 NO 28 803 NO 28 798 NO 28 297 NO 28 298 NO 28 299 NO 28 292

Felt polishers and felt discs. Cotton, chamois and felt polishers . For high Polishing paste
For preliminary and high burnish polishing of metal, gold, silver, brass and alu- burnish polishing of metal, gold, silver, non-ferrous Absolutely essential
minium with the use of polishing paste. Also for final polishing in mould and die- metals, brass, aluminium, ceramics and porcelain for polishing metal
making. Shaft Ø 2.35. Work with a lower rotational speed when polishing. Soften with the use of polishing paste. Also for reconditio- and plastic.
hard polishing paste with oil or heat up lightly. ning painted woods and plastics. Shaft Ø 2.35.

Rasp cutter with wolfram carbide burrs Holder for bits and cutters
For sculpting, cleaning and smoothing wood and fibre glass. The material
can be removed precisely and without physical effort. High stability and
easy to clean with a Bunsen burner. Also for use
on rubber, foam and silicone. Shafts Ø 3.2.
Do not use on metal !
For the clean storage of micro drills,
Ball nose cylinder 7.5 x 12 grinding bits, brushes and other
NO 29 060 rotating tools with shaft diameters
Cone 8 x 12 of 2.35 – 3.2. Without bits and
NO 29 062 cutters.
Taper 4 x 19
NO 29 064 NO 28 359 2 pieces
25
Selected cutting, sanding and polishing bits for professional use and long
Grinding bits 9 9
Ø 18 Ø 18
For 20 20 13 13

steel
stainless steel
cast iron
wood
5 x gr. 120 10 x gr. 120 5 x gr. 80 5 x gr. 80
5 x gr. 150 10 x gr. 150 5 x gr. 150 5 x gr. 150

NO 28 282 NO 28 982 NO 28 983 NO 28 987 NO 28 989

Nylon fleece brushes for cleaning, frosting Sanding discs, caps and bands are made of standard corundum. The sanding compounds have a
and sanding steel, stainless steel, non-ferrous diffe-rent application areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron,
metals, etc. Shaft ø 2.35. to the material to be sanded. Steel high, wood medium and plastic low rotational speed. Sanding bands

Grinding pins and discs

For
steel 2,5
2,5 6
6,0 5
5,0 7
7,0
8 13 9
cast iron
HSS steels 13

2,35
3
5x 5x 5x 5x 3x 3x 3x

NO 28 774 NO 28 776 NO 28 772 NO 28 778 NO 28 781 NO 28 783 NO 28 782

High quality corundum grinding bits. Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range
and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimen
ensuremaximum concentricity. Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!

Cutting bits

For 1,8
16

wood
steel 1,8
19
22
22 38
38

1,8 1,8
1,8
stainless steel 1,8

22
1,8

10x 50x 5x

NO 28 830 NO 28 810 NO 28 812 NO 28 820

Cutting blades made of spring steel Corundum cutting discs

0.1mm thick. For plastic, wood and non-fer- Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stain
rous metal. Shaft Ø 2.35. For free- hand work Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
use of the protective device 28 944 (see bot-
tom right)!

4-piece glass working set 13-piece set for model makers

2 diamond grinding bits and 2 silicon carbide grinding bits. One 2.3 ball-shaped and cylinder shaped fine milling bit each. One each
For engraving, grinding or frosting glass. Diamond bit 1: ball ball-shaped and cone-shaped white corundum grinding bit. One each 1 and
Ø 1, diamond bit 2: ball Ø 1.8, silicon carbide bit cone 3/2 x 2.3 micro drill. 5 cutting discs Ø 22. One saw blade Ø 22 (only in combination
5, and bullet 2/2.5 x 7. All shafts Ø 2.35. with the protective device 28 944) and arbor Ø 2.35.

NO 28 920 NO 28 910

26
 Note:
est life expectancy! All measures are in mm.
10 10 14 14
20 30
10 10 13 13
10 10

10 x 10 x 10 x 10 x
gr. 150 gr. 150 gr. 120 gr. 120 grit 120 grit 120

NO 28 980 NO 28 981 NO 28 978 NO 28 979 NO 28 984 NO 28 985

tough consistency and different grits for preliminary and refinishing work. Extreme toughness. Different versions for Flapwheels of standard corundum are ela-
stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. Adapt the rotational speed stic and adapt to the contours of the work
and caps can also be used for refinishing radii and grooves. Shaft Ø 3. piece being processed. For machining inacces-
sible spots. Shaft Ø 3.
Grinding pins and discs
22 22
For
glass 2
8
8,0

3 ceramics 3
7 5
tungsten
2,5 2,5
2,35 carbide 2,35

10x 10x

NO 28 302 NO 28 270 NO 28 272 NO 28 304

of applications. For grinding Silicon carbide grinding bits Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stel-
sioned shafts of Ø 2.35 or 3 lites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø 2.35.

22
22 38
38

1,8
1,8 1,8
1,8

25x 10x 50x 5x 20x

NO 28 821 NO 28 808 NO 28 809 NO 28 818 NO 28 819

Aluminium oxide cutting discs with reinforcement

less steels and non-ferrous metals. The cutting discs are available in Ø 22 x 0.8 and Ø 38 x 1. Nearly unbreakable, making them usable to remove stock. Will cut alloyed,
standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35.

10-piece complete polishing set Protective device

For polishing metal, glass, precious metals, porcelain and plastic. Consisting of 3 felt polishing bits For hand-operated MICROMOT devices with standard
(cylinder, cone and wheel shapes), 3 silicon polishing bits (bullet, cylinder and disc shape), cotton 20mm collar. For work with saw blades, cutting discs,
polishing disc, chamois buffing wheel and polishing paste. Includes 2.35 x 44 arbor. milling bits, grinding tools, steel brushes and polishing
NO 28 285 tools. Maximum usable tool diameter 22mm. Easy to
assemble.
NO 28 944

27
 For shrinking sleeves (many devices available on the market
are simply too large) and 1000 kinds of other applications.

MICRO Heat gun MH 550

Small, robust and powerful. Complete with 3 additional

nozzles.
For shrinking sleeves, shaping and welding plastics, solde-
ring and de-soldering of electronic components. For remo-
ving layers of paint and varnish without aggressive chemi-
cals (pickling agents). For drying and accelerating curing
processes (adhesives, paints). For applying and removing
films (stickers). For browning wood.

Housing of glass fibre reinforced POLYAMIDE with soft com-

DM
073123 ponents in the grip area and footprints for stationary use. A
Design Patent
powerful heating element ensures a consistent temperature
in 2 stages with an air flow of approx. 180l/min. Installed
Al l

N
XO

igh
r

ts by PROX
thermostat as security against overheating.

Technical Data:
230V. 500W. Air temperature in Stage 1: 350 °C. Stage 2: 550
°C. Air volume approx. 180l/min. Weight approx. 500g.

NO 27 130

MICROFLAME burner MFB/E Soldering iron LG 12

Used for soldering, de-soldering, brazing, heating of workpieces, With thermostat for precisely set 250 °C. Therefore ideal for
tinning. soldering electronic components.
Individually controllable gas and air supply. Super fine flame shape Lightweight and handy. Short heating time. Switch with latch. Sol-
with temperature attaining 1,200 °C. Ideal for precision work. Fitted dering point lighting for adequate views even in casings and diffi-
with an electronic piezo crystal lighter. cult-to-access areas. Replaceable soldering tip (available in stores).
With spiral cable and standard MICROMOT jack plug for connection
to all MICROMOT mains adapters (min. 1A).

Technical Data:
12 – 18V. 1A. Constant soldering tip
temperature of 250 °C.

NO 28 140
The tank contents of 50ml suffices for
approximately 60 minutes operating 00
1 0 7 6285

time with normal flame. For fill-up use Design Patent

Al l

standard butane cartridges for lighters.

XO

igh
r

ts by PROX

NO 28 146
12
VOLT

Replacement soldering tip

For LG 12. Easy to replace by loosening the clamping screw.
NO 28 141
28
 Precision screwdriver for electronic engineers, camera builders,
watchmakers, jewellers, precision engineers and model makers.

MICRO-screwdrivers
Shafts of high alloy nickel-chrome-molybdenum (SAE 8660) for maximum hardness and tough-
ness. Chromed with brinelled tip. The ergonomically formed plastic handles are oil and impact
resistant. The revolving top and finger mould improve ease of use.

Slot: 1 x 50, 2 x 50, 3 x 50 Fixed place for each item in the

Phillips: PH 0-3 x 50, PH 0 x 50, PH 1-2 x 50 practical holder. May be used as
desktop stand or fixed to a wall.
TX: T 5 x 50, T 6 x 50, T 8 x 50, T 10 x 50, T 15 x 50
Allen-key: 1.5 x 50, 2 x 50, 2.5 x 50, 3 x 50

NO 28 148 15 pieces in a stand

Note:
It is important to use the MICRO screwdrivers with care and feel.
The brute force associated with larger screwdrivers is best left for
other tools. The revolving top and finger mould improve ease of
use.

MICROMOT glue gun HKP 220

Quick and reliable gluing of metal,
wood, plastic (including Plexiglass),
glass, ceramics, stoneware, cardboard,
leather, polystyrene foams and tex-
tiles. Depending on the material and
on the adhesive quantity applied,
the adhesive sets after about 30
seconds, allowing positional cor-
rections within this period of time
(impossible with instant glues).
The 7mm glue sticks are perfect for delicate work such as model
building, toy and jewellery making, dried flower arrangements, etc.
Sensitive mechanical feed ensures correct glue quantity delivery.
Integral stand positions gun on worktop when not in use. Short
heating time.

Technical data:
230V. PTC controlled element for exact temperature of 200 °C. Four
glue sticks 7 x 100mm and 3 interchangeable metal nozzles are
included in the set.

NO 28 192

Including 3 interchangeable
Replacement glue sticks for HKP 220 metal nozzles.
For metal, wood, plastic, ceramics, cardboard, leather, polystyrene
foams and textiles. Ø 7mm. Length 100mm. Colourless.
NO 28 194 12 pieces

29
 For free modelling in Styrofoam.
No „crumbling“ as found when working with traditional tools.

Hot wire cutter THERMOCUT 12/E

12
VOLT
Note:
Styrofoam is an inexpensive material
and very environmentally friendly as
Cutting wires (285 x 0.85mm) can be compared to other materials; it can be
shaped by hand or tongs to manufacture easily cut through with a hot wire. This
any profile. Pivotable fixing
material is sold in standard sheet sizes
element at top.
of 50 x 100cm and thicknesses of 2 to
16cm at almost all DIY centres
and hardware stores.

Extendable wire fixing for

maximum extension of 200mm.

Cutting temperature
infinitely variable.

Also for cutting free in thick Styrofoam sheets for Diorama model railway construction.
For the manufacture of any profile.
Other application areas:
Architecture modelling, prototype construction, for designers, decorators,
or for fine work on construction insulation. And of course for classical model
building.

Stable frame with pivotable fixing element at top and extendable lower
wire fixing. Maximum total extension 200mm. Maximum work piece height
150mm.
Cutting wire temperature infinitely variable. With a little practice, you can
achieve optimum cuts depending on the material density and thickness.
Usually at medium temperatures and without too much pressure. Heat-up
time 1 second. Complete with five deformable cutting wires 285 x 0.85mm.

Technical data:
12V. 60W. 50/60Hz. Cutting wire temperature continuously variable from
approx. 150 – 350 °C. We recommend MICROMOT mains adapters with a mini-
mum capacity of 2A for operation (see page 19).
NO 27 082
Note:
With a bit of practice, creating Replacement cutting wire
landscapes even for finished railroads
and streets is easy. It is also no problem For the THERMOCUT 12/E. Easy to bend, therefore ideal for modelling.
to make corrections NO 28 082 10 pieces
to model landscapes.

30
 Used to cut styrofoam and thermoplastic materials,
both freehand and with stencils.

Hot wire cutter THERMOCUT 230/E

Note:
The working surface is of aluminium You will find the right temperature
cobond compound. This eases the pushing (depending on material and thickness) with a
of work pieces. A printed grid and protractor bit of instinct and practice. The optimum cut is
are applied to the base. usually achieved at medium temperatures and
without too much pressure.

Ideal for architectural models, designers, decorators, artists, teaching too, prototypes as
well as classical railroad, plane and boat model building.
Note:
The unit‘s double wound transformer and insulation to class 2 ensure the cutter is absolutely safe.
The cutting wire operates at 10V, 1A.

The large base with 390 x 280mm table with surface of aluminium cobond compound ensures
smooth and easy movement of the workpiece. The printed grid and protractor ease division
and cutting. The solid aluminium overarm has a 350mm throat and offers 140mm capacity in
height. The holder and wire coil (30m, 0.2mm diameter is included) may be shifted along the
overarm to enable mitre cutting. A LED indicates operation and prevents burnt fingers (the
cutting wire heats to maximum in less than 1 second).
Double function fence with lockable feed bar
Other technical data: (German Patent 100 00 102.5).
230V, 50/60Hz. Transformer secondary max. 10V, 1A. Cutting wire temperature with 0.2mm
diameter is variable between approx. 100 and 200 °C. Weight approx. 3kg. Insulated to class 2
requirements.
NO 27 080

Spare cutting wire

Used on the THERMOCUT 230/E and other similar units. Made of NiCr 8020. Spool of 30m x
0.2mm.
NO 28 080
Crosscuts are achieved by means of a simple yet
efficient solution: secure drawing-pin to table by
means of tape, it serves as a fixed centre.

31
 Centre distance 250mm and 40mm swing.
Variable speed control covering 1,000 – 5,000rpm.

MICRO woodturning lathe DB 250

Turning in miniature is a pleasing hobby. Technical data:
One can make glasses, cups, saucers, vases and columns for a doll Motor 230V. 100W. 50/60Hz. Centre distance of 250mm, 40mm
house. In model trains, swing. 25mm swing over support. Variable speed control covering
one can make lighting between 1,000 and 5,000rpm. Headstock spindle bore of 10mm.
masts, windows, tanks. Tailstock travel 20mm.
Limbs for marionettes Includes 6 collets (2 – 3 – 4 – 6 – 8 – 10mm), drive centre, live centre
and hundreds of classical and face plate.
miniature turning tasks
may be carried out with NO 27 020
ease. The electronic speed
control assists in the lower range in a ‘semi-automated’ painting pro-
cess.

Ball bearing spindle is bored Square carrier with back centre

through at 10mm. and 10mm shaft.
For series production of small parts. Tailstock with
quill travel.
The stable tool rest is
adjustable in all directions.

Powerful drive motor with The bed is made from

speed control between stable, thick-walled
1,000 and 5,000rpm. aluminium profile.
Six collets and a face plate (for turning larger work pieces)
are included.

Five piece HSS chisel set Drill chuck with sliding sleeve for the tailstock of the DB 250
A high quality set with the most frequently used Clamps up to 5mm. Is inserted on the spot of the
turning tools: beading tool, gouges 3mm and rotat-ing back centre. The feed movement results
6.4mm, parting tool and scraper. Neatly packed in a from sliding the complete tailstock.
wooden box. NO 27 028
NO 27 023
Independent four jaw chuck for the DB 250.
With individually adjustable jaws.
Used to clamp asymmetrical pieces such as rectangles. The
reversible jaws clamp from 1.5 – 35mm (inside) and from 14 –
67mm (outside). The DB 250 headstock spindle of thread M16 x 1
screws directly into the chuck.
NO 27 024

Three jaw chuck for the lathe DB 250. Used for concentric
clamping.
Made from steel and offering 1.5 to 32mm and 12 to 65mm
when reversing the jaws. The chuck has a M16 x 1 thread for
fitting directly to the DB 250 headstock spindle.
NO 27 026

32
 For precise machining of edges and longitudinal cuts in wood,
fibreboard and suitable plastics.

MICRO shaper MP 400

For chamfering, cutting grooves, slots, recesses, radii and other Adapter for vacuum cleaner fits standard household vacuum clea-
profiles. For crafting picture frames and for separating. Also enables ners. Three tungsten carbide router cutters (slot cutter 3.2mm,
exact manufacturing of edges and longitudinal cuts (for model V-slot cutter and core box bit) are included.
building, e.g. for doors, flaps and housing parts). Powerful dust-pro-
tected motor with toothed belt drive. Double ball-bearing spindle. Technical data:
Tool holder with triple slit precision collets (one each of 2.4 – 3 and 230V. 100W. 50/60Hz. 25.000/min. Height adjustment with scale
3.2mm are included). ring adjustable to 0 (1 revolution = 1, 1 graduation = 0.05mm). Mil-
Milling cutter height adjustment by hand wheel. Stable aluminium ling table 300 x 150mm. Weight approx. 2kg.
table with longitudinal and angle stop as well as cutter guard. NO 27 050

/ 0 7553
DM 4

Design Patent

Al l

N
XO
igh

r
ts by PROX

The MP 400 is fitted with a dust collec-

tion channel and vacuum adapter.

Three tungsten carbide

router cutters and three
collets are included.

Tungsten carbide router cutters for MP 400 10-piece wood router cutter set
1 piece each of the cutters offered here. Neatly packed in
For wood, fibreboard and plastics. Clean relief grinding for good wooden box.
work results and surface quality. High stability. Shafts 3.2mm.
NO 29 020
NO 29 024 slot cutter Ø 3.2mm 1

NO 29 026 slot cutter Ø 4.3mm 2

NO 29 028 slot cutter Ø 6.5mm 3

NO 29 030 Rounding over cutter Ø 6.4mm 4

NO 29 032 V-slot cutter Ø 6.5mm 5

NO 29 034 Combi cutter 6.5/2.5mm 6

NO 29 036 Core box bit R 3.2mm 7

NO 29 038 Rebating cutter 6.4mm 8

NO 29 040 Edge cutter with pin 5mm 9

NO 29 044 Angle cutter 45° 10

1 2 3 4 5 6 7 8 9 10

Attention:
The wood router cutters offered here may only be used with
6,5

4,3 45° working devices that have a safety mechanism. For example
MICRO shaper MP 400.
33
 For perfect straight cuts in wood, non-ferrous metals,
plastic and PC cards.

Bench circular saw KS 230

The ‘Super-Cut‘ saw blade (Ø 58mm) cuts soft wood up to a Solid carbide saw blade
thickness of 8mm. 50mm diameter (10mm bore). 0.5mm thick. Fine toothed:
Low noise and persevering AC motor with high life expectancy. ideal for cutting fibreglass sheets up to 3mm, non-ferrous
Power transmission by toothed belt ensures the right blade speed metals, duro-plastics and other ‘difficult’ materials.
for the job with approx. a doubling of torque. Cutting performance NO 28 011
in wood up to 8mm, plastics (also PERTINAX printed circuit boards)
up to approx. 3mm, non-ferrous metals up to approx. 1.5mm.
Even fibreglass reinforced PC cards can be cut by using a carbi- Saw blade made of high-alloy special steel. 50mm diameter (10mm
de saw blade. Adjustable mitre fence with scale. Angle stop with bore). Alloy holding a high proportion of tungsten, vana-
degree graduation. Flat-milled worktop of die-cast aluminium (160 dium and molybdenum for an even structure, high hard-
x 160mm). ness and long lifetime. Fine-toothed. For very fine cuts
Technical Data: in non-ferrous metals (aluminium, brass, copper). Also
230V. 85 W. 5,000rpm. Weight approx 1.8kg. suitable for cutting compound materials like PC cards,
and sawing wood and plastics.
NO 27 006 NO 28 020

Diamond blade. 50mm diameter (10mm bore). Tungsten tipped saw blades
With 0.5mm layer of class ´D107´ diamond for 50mm Ø x 1.1mm (10mm bore). 10 teeth. Used to cut
cutting ceramics, porcelain, tiles, stone as well as hard and soft woods, PC cards, PERTINAX and aluminium.
PC cards. NO 28 016
NO 28 012

Crosscut ‘Super-Cut’ blade 58mm diameter (10mm bore). 50mm Ø x 1.1mm (10mm bore). 20 teeth. For extreme-
80 alternately set teeth. Ideal for hard and soft ly clean cuts of balsa, plywood. Can also be used for
wood as well as plastic and Pertinax. For fast, clean cutting PC cards and POLYCARBONATE.
cuts. Teeth are individually set and sharpened. NO 28 017
Superior cutting power!
NO 28 014

‘Super-Cut‘ blade (58mm dia- Adjustable fence

Note: meter), 80 teeth, individually with scale.
You will find the larger version of the circular saw set and sharpened, is included.
KS 230 (type FET) on pages 40/41.

Graduated mitre stop.

Machined, die-cast aluminium table

of 160 x 160mm.

Motor: low noise and persevering

for prolonged use.

Base of ABS with a sawdust door

on the right.

Very important when sawing:

use our vacuum cleaner adapter for a cleaner
work environment.

34
 Cuts aluminium, wood, PC cards and plastics with standard scroll
saw blades. With electronically controllable stroke rate.

Scroll saw DS 230/E

Note:
You will find our larger scroll saw models DS 460
and DSH on pages 38 and 39.

Adjustable head (patent EP 09783341) offers

many advantages (see below).

Use the vacuum cleaner adapter to

keep your work area cleaner.

The ideal machine for the delicate job: model building, toy making ‘Super-Cut‘ scroll saw blades. High quality steel for extended use
and precision mechanics. With electronic speed control. and prolonged cutting capacity. Standard version without pin.

Cuts soft wood up to 40mm, hard wood up to 10mm, plastics (inclu- Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
ding PC cards) up to approx. 4mm and non-ferrous metals up to
2mm. Plane-milled die-cast aluminium table (160 x 160mm). Coarse-toothed blades No. 9: 14 teeth per 25mm
Saw frame with 300mm throat made from very stable ribbed die-cast NO 28 116 130 x 1.5 x 0.48mm 12 pieces
aluminium. Blade guide with integrated blower. Height adjustable
head (3 positions) offering two advantages: Standard-toothed blades No. 5: 17 teeth per 25mm
– Blade usage is improved as NO 28 117 130 x 1.20 x 0.38mm 12 pieces
the head may be lowered in two
steps, making new blade teeth Fine-toothed blades No. 3: 34 teeth per 25mm
available. This effectively triples NO 28 118 130 x 0.8 x 0.34mm 12 pieces
blade life.
– The lowest head position still Hard materials such as steel and PERTINAX.
allows blades, shortened by
60mm, to be used.
Low noise and persevering AC motor with high Standard-toothed blades No. 5: 36 teeth per 25mm
life expectancy. Quiet and wear-resistant drive via toothed belts. NO 28 112 130 x 0.85 x 0.4mm 12 pieces
Adjustable mitre fence and angle stop with scale. Includes 5 saw
blades (3 coarse-toothed and 2 fine-toothed). Fine-toothed blades No. 3: 41 teeth per 25mm
NO 28 113 130 x 0.75 x 0.36mm 12 pieces
Technical Data:
230V. 85W. Electronically controllable stroke rate from 150 –
Very fine-toothed blades No. 1: 50 teeth per 25mm
2,500rpm. Weight approx 2kg.
NO 28 114 130 x 0.6 x 0.3mm 12 pieces
NO 27 088
35
 For 50mm discs and brushes.
With electronic speed control from 8 to 24m/sec.

Grinding and polishing machine SP/E

The dust collector and vacuum cleaner

adapter can be used.

The slim housing facilitates the grinding of long workpieces and Polishing set
includes an adapter to connect a vacuum cleaner to the unit. Steel wire brush for de-rusting and clean-
The tool rests and eye guards are both adjustable. A spindle lock ing steel and non-ferrous metals. Brass
eases the changing of wheels and discs. Supplied with a 50 x 13mm wire brush to polish non-ferrous metals
corundum (grade N) and silicon carbide (soft compound) wheel and precious metals. Felt wheel is used
for general grinding/sharpening on painted surfaces and the chamois
and hard materials respectively. and cotton wheels provide a high gloss
The right hand spindle accepts the finish on non-ferrous metals and precious
polishing arbor, which is supplied as metals.
standard equipment. NO 28 312 Complete set

Technical data: Spare discs for the SP/E and BSG 220 (50 x 13mm)
230V. 3,000 - 9,000rpm. Wheels 50
Corundum (grade N) with 12.7mm bore
x 13 x 12.7mm. Grinding speed 8 -
NO 28 308
24m/sec. Weight approx. 1,200g. Size approx. 250 x 130 x 100mm.
NO 28 030 Silicon carbide with 12.7mm bore. Soft compound for very hard materials.
NO 28 310

Cut off saw KG 50

Accurately cuts small items of metal, wood and plastic.
Table moveable through 45°, allowing mitre
cuts. Workpiece is fastened tightly and accu-
rately by means of the integrated clamping
device. Clamp jaws 27mm wide and maximum
workpiece diameter 20mm. Depth of cut to
13mm. A special slot is provided to clamp HO
model tracks.
The fence accepts lengths up to 140mm. Five ceramic cutting discs 50 x
1 x 10mm are also included suitable for cutting steel, non-ferrous metals
as well as wooden or plastic rods.
Technical Data: 230V. 85W. 50/60Hz. Peripheral speed 20m/sec.
Weight approx. 1.5kg.
NO 27 150

Replacement cutting discs

Made of ceramic compound: 50% aluminium oxide and 50% silicon
carbide. Suitable for cutting steel, non-ferrous metal as well as small Note:
wood and ceramic bars. You will find the larger version of the KG 50, our Cut off/mitre saw
NO 28 152 KGS 80, on page 45 !
36
 For surface treatment of precious and non-precious metals and also
plastics. For standard brushes and inserts up to 4" or 102mm.

Polishing machine PM 100

/08 29 7 1
DM

Design Patent
Al l

N
XO

igh
r

ts by PROX

Shaft drive via toothed belt: The motor no longer

limits the working area. The slim housing around the
main shaft even enables machining the surface of
very long and variously shaped work pieces.

Load bearing side parts made of aluminium with milled bearing Included with the original equipment:
seats enable very quiet low-vibration operation. 1 each stiff and soft muslin polishing wheel (100 x
With long, ball bearing mounted main shaft (distance from disc to 15mm) and 1x universal polishing bar (80g).
disc approx. 360mm) and adjustable protective guards to work
cleanly with polishing pastes. Powerful drive through DC motor with
speed control (full-wave electronics). For high starting torque and Technical data:
enormous traction even during strong contact pressure. 230V. 140W. 50/60Hz. Variable speed of 1,000 –
Firm mounting with screws, but also with the attached screw clamp 3,100rpm. For polishing discs up to a max. of 4" or
in horizontal or vertical position. Ø 102mm. Size L 360, W 220, H 250mm. Weight ap-
prox. 5kg. Insulated to class 1.

NO 27 180

Universal polishing bar (80g) made from polishing

compound and wax
Particularly suitable for polishing and
Accessories for polishing machine PM 100 high shine polishing of precious and non-
precious metals as well as plastic. Also for
freshening tarnished aluminium, copper or brass.
NO 28 008

Muslin polishing wheel, stiff (100 x 15mm) Felt cloth polishing disc (100 x 15mm)
Impregnated and especially stiff. For preliminary For high shine polishing of smooth surfaces
and shine polishing of gold, silver, platinum, on metals (e.g. gold, silver, brass, and alumini-
copper, brass, stainless steel and plastic. Use um). High lateral stability and durability. Very
only with polishing paste or polishing emulsion. even polishing results. For use with all polish-
ing pastes.
NO 28 000 NO 28 004

Muslin polishing wheel, soft (100 x 15mm) Microfibre polishing wheel, 15-ply (100mm)
For high shine polishing of gold, silver, plati- Very soft. For shine polishing of precious and
num, copper, brass, stainless steel and plastic. non-precious metals as well as plastic. Es-
Adapts to the workpiece contour. Use only with pecially suitable for spots difficult to access
polishing paste or polishing emulsion. which cannot be reached with rigid discs.
Use only with polishing paste or polishing
emulsion.
NO 28 002 NO 28 006
37
 460mm throat! Extremely light magnesium saw arms reduce the
approx. 40% compared to die-cast aluminium. For smooth running

2-speed scroll saw DS 460

/0 7 199
DM 2
Extremely important: A handy
adjusting knob enables Design Patent
sensitive clamping of the

Al l

N
XO
igh

r
ts by PROX
saw blades!

The DS 460 is equipped with a suction

connection with vacuum cleaner adapter.
For dust-free and clean working.

Note:
You will find the scroll saw DS 230/E, ideal
for delicate projects, on page 35 !

Sturdy construction: Vibration-reducing base housing of cast steel,

neatly CNC-processed and powder-coated. For stability and working
without vibrations.

Magnesium saw arms precisely mounted on bearings: Extremely light Technical Data:
and firm with a slender-shaped cutting area for an unobstructed view of 230V. Powerful, brushless 2-speed motor (205W). Throat 460mm.
the work piece. Chip blowing device with adjustable nozzle. Additional Stroke alternatively 900 or 1,400rpm. Saw stroke 18mm. Table size
suction connection to connect a vacuum cleaner. 400 x 250mm. Maximum work piece passage 65mm (at 45° mitre
32mm). L 580mm, W 320mm, H 300mm. Weight 20kg.
Large saw table made of die-cast aluminium (400 x 250mm). For easier
saw blade replacement, it can be unlocked and pushed back (see NO 27 094
description at top right). Regular scroll saw blades are fastened by saw
blade holders with high clamping force: This ensures true alignment in
the saw arm! The machine has also been prepared for saw blades with
pin ends that are used without blade holders. Extremely important for
these types of scroll saws: A handy adjusting knob enables sensitive Blade holders for DS 460
clamping of the saw blades! (one pair is already included with the machne).

Table angle adjustment possible from 5° to 50° (see bottom right).

For clamping regular saw blades with high clamping
Cutting performance in wood 60mm, in non-ferrous metals (depending force: for true alignment of the saw arm.
on type) 10 - 15mm. Also easily cuts Plexiglas, glass fibre reinforced plastic,
foam, rubber, leather or cork. Includes 5 each coarse and fine saw blades. NO 27 096 2 pieces

38
 Standard scroll saw blades with pin ends. 127mm:
weight of the mass moved by For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work
and clean cuts. pieces. Coarse-toothed (10 TPI per 25mm):
NO 28 741 127 x 2.61 x 0.51mm 12 pieces
For cutting thin materials, soft and hard wood as well as plastics.
Normal toothed (18 TPI per 25mm):
NO 28 743 127 x 1.86 x 0.24mm 12 pieces
Easy saw blade replacement For cutting non-ferrous metals, glass-fibre reinforced plastics, plastics, Plexiglas and wood.
without tedious fiddling by Fine-toothed (25 TPI per 25mm):
NO 28 745 127 x 1.76 x 0.25mm 12 pieces
pushing back the table !
Spiral blade. 130mm long with plain ends (without pins).

These blades cut all directions and obviate the turning of the workpiece (advantageous, especial-
ly with bigger workpieces). A 1.5mm hole is required. Ideal for plastic, hard and soft woods.
NO 28 747 125 x 1.2mm 12 pieces
“Super-Cut“ scroll saw blades without pins. 130mm:

For cutting hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Coarse-toothed blades No. 9: 14 teeth per 25mm
NO 28 116 130 x 1.5 x 0.48mm 12 pieces
Standard-toothed blades No. 5: 17 teeth per 25mm
NO 28 117 130 x 1.2 x 0.38mm 12 pieces
Fine-toothed blades No. 3: 34 teeth per 25mm
NO 28 118 130 x 0.8 x 0.34mm 12 pieces

Innovative solution (patented): To enable easy Hard materials such as steel and PERTINAX.
saw blade replacement, the horizontally positi-
Standard-toothed blades No. 5: 36 teeth per 25mm
oned table can be unlocked and pushed back by
NO 28 112 130 x 0.85 x 0.4mm 12 pieces
80mm. For an unobstructed view of the bottom Fine-toothed blades No. 3: 41 teeth per 25mm
saw arm when fitting the saw blade holders or pin NO 28 113 130 x 0.75 x 0.36mm 12 pieces
end blades. Very fine-toothed blades No. 1: 50 teeth per 25mm
NO 28 114 130 x 0.6 x 0.3mm 12 pieces

2-speed scroll saw DSH. The 10,000-fold proven

standard model with 400mm throat.

Patented saw blade holders with high clamp-

ing force ensure true alignment of the saw bla-
des. Recesses in the table surface serve as guide
line in assembly to define position and distance
of the saw blade holders.

Cutting performance 50mm in wood, 30mm in plastic, 10mm in non-ferrous metals.

For cutting Plexiglas, glass fibre reinforced plastic, foam, rubber, leather or cork. Slender saw
arm of die-cast aluminium for unobstructed view from top. Air blower with adjustable air
nozzle. Sturdy table of die-cast aluminium (360 x 180mm), can be tilted by 45° for mitre saw-
ing. Base housing of cast steel for stability and working without vibrations. Includes 5 each
coarse and fine saw blades.
Technical Data:
Table angle adjustment possible from 5° to 230V. Powerful, brushless 2-speed motor (205W). Stroke alternatively 900 or 1,400rpm.
50°. With large dimensioned serrations at 0°, 10°, Stroke length 19mm. Throat 400mm. Maximum cutting depth 50mm, at 45° mitre
20°, 30° and 45°. Additional fine adjustment for 25mm. Weight approx. 20kg.
precise mitre and angle cuts. NO 28 092

39
 With set-screw for fine adjustment of the longitudinal stop by 1/10mm.
For precise, straight cuts without refinishing !

Table saw FET

Setting screw for fine

adjustment of
longitudinal stop
by 1/10mm.

Extendable table
extension with inte-
grated auxiliary stop.

A suction connection with vacu-

Note:
um cleaner adapter permits
You will find the smaller version Angle stop with stop rail of aluminium and
clean working with table saw
of the FET (circular saw KS 230) adjustable limit stop for manufacturing parts
FET and surface planer AH 80.
on page 34. of equal length and the same angle.

AH 80 and DH 40: The smallest and finest in the world !

Surface planer AH 80
Supporting construction all made of die-cast aluminium
with CNC-machined fits. Pre-condition for vibration-free,
clean planing of soft and hard woods.
The heart of the machine: Ball-bearing mounted planer block
with exchangeable HSS blades. Belt-driven by special low
noise DC motor. Plane-milled table, of which the right table
half is fine adjustable via toggle screw. Adjustable longi-
tudinal stop, to both sides inclinable through 45° (scale
available). Practical safety milling protection that does not
interfere during work. Main switch with emergency-stop and restart
protection. Including suction connection and push stick.

Technical data: DM
/ 076 4
07

230V. 200W. 50/60Hz. Table 400 x 80mm. Planing width 80mm. Maximum Design Patent
chip removal (infeed) 0.8mm. Speed 6,000rpm. Weight 5.5kg. Insulated
Al l

N
XO

igh
r

ts by PROX
to class 1.
NO 27 044

Replacement planer blades for AH 80

HSS steel, 82mm long.
NO 27 046 2 pieces

40
Height adjustable tungsten-tipped saw blade, tilting through 45°.

For fine mechanics, model building, mould construction, toy

manufacture, architects, model carpenters and fitters.
Non-slotted sawing cap cover of ABS
for tight tolerances between saw
For cutting wood, non-ferrous metals, plastics, Plexiglas, glass fibre reinforced sheets, foam and blade and table (is slotted from below
many other materials. Stable construction because load bearing parts and plane-milled table are by the FET saw blade). For cutting
very small parts.
made of die-cast aluminium.
The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections
even smaller than 1/10 mm can be made after coarse adjustment using an adjusting screw. The height
adjustable and 45° tiltable saw blade makes it possible to cut double mitres when used together with
the angle stop.
Low-noise drive using DC special motor with Optibelt toothed belts. Ball-bearinged saw blade shaft.
Tungsten tipped saw blade 80 x 1.6 x 10mm (24 T). Additional work piece pusher and non-slotted ABS
sawing gap cover for tight tolerances between saw blade and table.
Technical data:
230V. 7,000rpm. Mitre infinitely adjustable up to 45°. Table size 300 x 300mm. Cutting depth 1 - 22mm.
Saw blades between 50 - 85mm can be used (with 10mm centre hole). Weight approx. 6kg. Table and drive can be lifted up and
NO 27 070 supported like an engine bonnet. For
cleaning the device and easy saw blade
replacement.

Super cut Tungsten carbide tipped Tungsten carbide tipped Diamond coated
Ø 85 x 0.5 x 10mm. Ø 80 x 1.6 x 10mm, Ø 80 x 1.5 x 10mm, Ø 85 x 0.7 x 10mm.
80 teeth. Use on 36 teeth.Use for balsa, 24 teeth.Use on Layer ´D100´
hard and soft plywood, soft and non-ferrous metals, Ceramics,
woods, plastics. hard woods, POLY- soft and hard porcelain, tiles,
CARBONATE, plastics, woods, laminates, stone, PC cards
non-ferrous metals, plastics
glass-fiber reinforced
NO 28 731 circuit boards. NO 28 732 NO 28 734 NO 28 735

Thicknesser DH 40
Load bearing components are all made of die-cast aluminium, with milled
seats for bearings and spindles.
These characterics are essential for vibration-free, smooth thicknessing of soft and
hard woods. Triple-spindled table (of die-cast aluminium, flat-milled) which can
be accurately adjusted to 1/10mm by handwheel (zero adjustable). Automatic
even feed with anti-kickback device: The knurled, spring-mounted infeed roller
transports even irregularly shaped work pieces. A rubber-coated outfeed roller
prevents marking the newly planed surface. Precision planer block with two HSS
planer blades.

Technical Data:
230V. 200W. 50/60Hz. Thicknessing up to 40mm thick and up to 80mm wide.
Maximum depth of cut 0.8mm. Cutter speed 6,000rpm. Feed rate 4.8m/min.
Table length 232mm. Weight approx. 8kg.
NO 27 040

Spare blades
For thicknesser DH 40. Made of HSS. Length 82mm.
NO 27 042 1 pair

41
 A precision machine for fine sanding work and minor material
correction. Variable sanding speeds 250 – 800m/min.

Disc sander TG 125/E

With associated horizontal C-clamp
(with table), but can also be fixed vertically
quickly and safely (to sharpen tools).

Suction channel with adapter

to connect a vacuum cleaner.

Plane-turned sanding disc (125mm) made of die-cast

aluminium, covered with silicone film. This allows for
effortless removal of sanding discs after use.

Table tilting through 50° downwards

and 10° upwards. With angle stop.
With C-clamp for horizontal and vertical fixing
(see figure above).

For all wood types, steel, non-ferrous metals, precious metals, Both machines are equipped with suction
plastics (also Plexiglas and glass-fibre reinforced plastics). connection and adapter for dust-free, clean
Powerful drive and vibration-free running thanks to balanced DC sanding. We recommend our Compact Work-
motor. Housing of glass-fibre reinforced POLYAMIDE. Aluminium table shop vacuum cleaner CW-matic (see page 48)
tilting downwards through 50°, 10° upwards, with angle stop. Plane- with integrated automatic switch control. The
turned sanding disc of die-cast aluminium covered with silicone film. vacuum cleaner runs as long as the machine
This allows for effortless removal of sanding discs after use. Two addi- runs. There is a follow-up time of 5 seconds
tional square silicone films offer easy storage after use and thus re-use after switching off the power tool.
when needed. Machine can be secured both horizontally (with table)
on the workbench, and also quickly and safely in vertical position. Suc-
tion connection and adapter to connect a vacuum cleaner for dust-free
working. With each 2 sanding discs grit 80, grit 150 and grit 240. Self-adhesive white corundum sanding discs
for TG 125/E
Technical data:
230V. 140W. 50/60Hz. Adjustable grinding speed of approx. 250 – Industrial quality. For sanding soft and hard woods, chip-
800m/min (corresponds to 1,150 – 3,600rpm). Sanding disc ø 125mm. boards, fibre boards, non-ferrous metals, steel, plastics, cork,
Table 98 x 140mm. Sanding height 62.5mm. Size 300 x 140 x 160mm. rubber and minerals. Ø 125mm. One quadratic silicone film for
Weight approx. 3kg. storage and reuse of used sanding discs is included.

NO 27 060 NO 28 160 80 grit 5 pieces

NO 28 162 150 grit 5 pieces
NO 28 164 240 grit 5 pieces
42
 With adjustable grinding speeds from 250 and 750m/min.

Disc sander TSG 250/E

/0 7 261
DM 4

Sands long edges, end sections, radii, mitres, and,

Design Patent
by turning the workpiece over - accurate flat sur- 250mm-sanding disc machined

Al l

N
XO
igh
faces at right angles.

r
ts by PROX
with diamond tools.
Used on soft and hard woods, non-ferrous metals, Double ball bearing.
steel, plastics (perspex and PC cards), cork and rubber.
A simple chart indicates the recommended speeds on
different materials.

Sturdy construction:
Main body of ribbed die-cast
aluminium (no steel tube or
sheet metal construction). Tur-
ned flat grinding disc, provided
with silicone film: This ensures
that affixed sanding discs can
be removed effortlessly after
use. Two additional square
silicone films for storage and
reuse of used sanding discs are
included. With dust collection
adapter for connection to a
vacuum cleaner for dust-free
working. Complete with mitre
gauge and 2 each sanding
discs in grain 80 and 240.

Technical data:
230V with drive via Optibelt toothed belt (re-
duction ratio 7.3:1). Electronic speed control approx.
250 – 750m/min. Disc diameter 250mm. Maximum
sanding height 135mm, table 275 x 105mm (tilts 15°
in, 45° out). Overall size without table 330 x 280 x
230mm.

NO 28 060

Self-adhesive silicone carbide sanding discs

for TSG 250/E
For sanding non-ferrous metals, steel, glass, PC cards, plastics and
ceramics. Ø 250mm. Includes silicone film for storing used sanding
discs.
NO 28 976 320 grit 5 discs
Self-adhesive corundum sanding discs
for TSG 250/E
Self-adhesive silicone film for easy sanding disc
Industrial quality. For sanding soft and hard woods, chipboards, removal (ø 250 mm).
fibre boards, non-ferrous metals, steel, plastic, cork, rubber and For retrofitting older disc sanders TG 250/E (production before 2007
minerals. Ø 250mm. Includes silicone film for storing used sanding with serial no. up to 14190). The film needs to be placed on the alumi-
discs. nium sanding disc and ensures easy removal of sandpaper discs after
use. With 4 square silicone films for storage of used sanding discs and
NO 28 970 80 grit 5 discs re-use when needed.
NO 28 972 150 grit 5 discs
NO 28 974 240 grit 5 discs NO 28 968 set
43
 Perfect cuts in steel, non-ferrous metals, wood and plastic.
With triple ball bearing blade guide.

MICRO bandsaw MBS 240/E

Solid, ribbed die-cast aluminium housing (no tubular or sheet
metal construction). Double ball bearing mounted aluminium pulleys.
Sturdy, plane-milled table with slot for mitre
gauge (tilts through 45° for accurate mitre
sawing). Triple ball bearing blade guide
system, adjustable in height and width for
different widths of saw blades. Low noise
220V motor (high quality, for quiet, prolonged
use) with Optibelt toothed belt.
Electronically controlled speed for exceptio-
nally accurate cutting (no subsequent finishing necessary !).
A table indicates the recommended speed for practically all kinds of
material. The blade size of 5 x 0.4mm
is ideal for fine work and allows for
cutting of small radii.

Technical data:
230V. Blade speed adjustment from
180 to 330m/min (feedback effect).
Throat 150mm, maximum height
80mm. Table 200 x 200mm (tiltable
from 0° to 45°). One blade 1,065 x 5 x
0.4mm (14 TPI) is included.

NO 27 172

Blade guide, separately (see figure above)

NO 28 187

Standard bandsaw blade

Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass.
NO 28 174 1,065 x 5 x 0.4mm

As above, but coarse toothed (14 TPI)

NO 28 176 1065 x 5 x 0.4mm

Extra narrow bandsaw blade (3.5mm) for tight radii

Of special tempered steel, with induction-hardened coarse teeth
(14 TPI). Especially suited for aluminium and plastics.
NO 28 180 1,065 x 3.5 x 0.5 mm

Bandsaw blade of bimetal

Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant
high-speed steel. Varying teeth 10 – 14 TPI. Ideal for cutting all standard
steel qualities, non-ferrous metals and stainless steel.
NO 28 172 1,065 x 6 x 0.6mm

Diamond blade
For cutting stone, ceramics, glass or glass-fibre reinforced plastics. Only
proper cooling will ensure optimally cut glass or ceramics and enable
a long service life of the band. Sparingly coolant liquid can be applied
with a brush
NO 28 186 1,065 x 3 x 0.3mm

Band knife of hardened spring band steel (without teeth)

Note: For cutting foam, plastic, rubber, leather, cardboard and paper board.
TPI stands for the number of teeth per inch (25mm) per bandsaw blade. NO 28 184 1065 x 6 x 0,4mm

44
 For clean, safe cutting to length of non-ferrous metals,
plastic and wood.

Cut off/mitre saw KGS 80

Note:
You will find the smaller version of the KGS 80, our mini cut-off
saw KG 50 (weighs only 1.5kg instead of 6kg) on page 36.
Optional saw blades for the KGS 80 are offered on page 41.

Comfortable grip with built-in switch

and saw head release button.

Laterally moving saw head

to minimize the distance
between the vice holding the
workpiece and the kerf.
For cutting without vibration
and chattering!

Fence adjustable to
300mm.
Round table made of die-cast
aluminium, rotates 45° left and
right. Positive stops
in 15° increments.

Integrated clamping system with fixed jaws. V-slot for round

workpieces. Front side slot allows thin pieces to be clamped.

Cutting capacity at 90° Cutting capacity at 45°

Ideal for mitre cuts: Adjustments are made to the round table (right angle cut) (mitre cut)

(with clamped work piece) and not to the headstock! Material size Max. material Round material Material size Max. material Round material
(in mm) width (in mm) (in mm) (in mm) width (in mm) (in mm)

10 65 5 36
The opposite angle for a second frame part of identical length 18 50 10 30
occurs through simple shifting with the longitudinal stop and by 21 40 15 25
rotating the table by 2 x 45°. Powerful, quiet DC-motor. Smooth 25 25 Ø max. 25 20 18 Ø max. 20
toothed belt drive ensures power transmission. Tungsten-tipped
saw blade for non-ferrous metal, wood and plastics (80 x 1.6 x Cutting disc, with reinforcement.
10mm, 24 TPI). Corundum-bound and shatter-proof. For cutting
alloyed and non-alloyed steel, stainless steel and
Other technical data: non-ferrous metals. Also suitable for wood and
230V. 200W. 50/60Hz. 6,000rpm. Base with round table of highly plastics.
stable die-cast aluminium with CNC-milled fittings and slides. Table NO 28 729 80 x 1 x 10mm
230 x 230mm. Weight 6kg. See table for cutting capacity.
Tungsten tipped circular saw blade (36 T).

Extremely clean cut edges thanks to high tooth

count when cutting balsa, plywood, soft wood and
glass reinforced plastic boards. Also for cutting hard
NO 27 160 wood, POLYCARBONATE, plastics and aluminium.
NO 28 732 80 x 1.6 x 10mm
45
 For precision work: even 0.5mm holes may be drilled.
With three step pulleys for easy speed change.

Bench drill machine TBM 220

The optional MICRO compound table

KT 70 is described on page 21.

3 spindle speeds by
shifting the flat belt for
more than the triple
torque in the lower
rotational speed range.

Fully adjustable depth gauge.

Machine vice MS 4 made of die-cast zinc is an

invaluable accessory and is
described in detail on page 20.

Plane-milled worktable of die-cast aluminium (220 x 120mm)

with adjustable fence and scale as well as threaded holes for
securing the MICRO compound table KT 70. 6 MICROMOT steel collets are
Solid steel column (20 x 340mm). Adjustable fence with scale. Solid, included in the scope of delivery.
hard-chromed steel column, 340mm high, 20mm diameter. Super
stable die-cast head with VDE approved motor. Very quiet and of
long life expectancy type. Power transmission by aluminium pulleys
and flat belt. Three spindle speeds (triple torque at low speeds). Precision machine vices
Feed lever with adjustable depth scale.
Ease of operation. With precise jaw guide:
Technical data:
230V. 85W. 50 – 60Hz. Spindle speeds of 1,800, 4,700 and 8,500rpm.
Extremely high rotational accuracy, 30mm feed. Throat depth
(column to drill spindle) 140mm. Six triple slit precision collets for
shaft sizes 1 – 1.5 – 2 – 2.4 – 3 – 3.2mm are included. 3/8" thread.
Weight 3.3kg.
NO 28 128

Chuck
For drill shank sizes 0.6 to 6mm. Max.
speed 10,000rpm. Industrial quality with
extra high speed accuracy.
With 3/8" thread for MICROMOT bench
drill TBM 220.
NO 28 122

46
 Sublime precision tool. Ideal for the lab,
workshop and delicate operations.

Bench drill press TBH

Ideal for jig boring with the compound

table KT 150 (page 66).

Note:
Table and arm of the table drilling machine offered here are made
of die-cast aluminium. A refined, rust-proof and statically very solid
material. Fittings and feeds are machined on our highly modern CNC-
controlled machines (milled, line-bored, lathed, etc.).
Practical height
adjustment via
Practical height adjustment via toothed rack with easy to operate toothed rack with
crank. Powerful, long-lasting direct current motor. Spindle drive side crank.
via triple belt pulley with the advantage of roughly
6 times the torque in the lower rotational speed
range.
Practical drill depth indicator with adjustable limit
stop. Drill spindle with precision bearing. Spindle
head with 1/2" thread for the corresponding chuck
(industrial quality). Spindle with additional fit for
steel collets NO 28 200.

Technical data:
230 Volt. Spindle rotational speeds 1,080 – 2,400 and 4,500rpm.
Sliding sleeve stroke 63mm. Height adjustment via crank 70mm.
Throat 140mm. Usable table surface 200 x 200mm. Column 45 x
500mm. Tool holder up to 10mm. Drilling performance in steel
10mm. Weight approx. 10kg.
NO 28 124

PRIMUS 75
Base body made of special cast iron with CNC-machined guides.
Interchangeable gripping jaws. Flat-milled working surface. Spindles
with rolled trapezoid thread for ease of operation even during high Stable, strongly ribbed plane-milled
axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from worktable with two T-slots.
long slot centre to long slot centre 100mm. Long slots 80 x 11mm.
Weight 2.5kg.
NO 20 392

PRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot
centre to long slot centre 135mm. Long slots 105 x 15mm. Weight
5kg. Other details as for the PRIMUS 75.
NO 20 402
Collet set for drill press TBH
T-nut set for PRIMUS vices Triple slit and hardened. 1 each of 2.35 – 3 – 3.2 – 4 - 5 and 6mm.
2 T-nuts, screws and the necessary accessories. For fixing to the drill With collet closure nut (M 17)
tables of: BFB 2000, KT 150 and bench drill press TBH. Neatly packed in wooden box with sliding lid.
NO 20 394 NO 28 200

47
 The clever solution for a clean working environment: with direct
connection for electric tools from 25 – 2,000W.

Compact workshop vacuum cleaner CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5
seconds after switching off the power tool.
Smooth operation with high suction capacity. With large fluted filter made of POLY-
PROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not
essential for this function). Container is easily emptied by removing the appliance lid with
the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for
vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe
(98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard
adapter of all such equipped PROXXON machines. Practical holder for the suction connec-
tion included (description on the left). Supplied with 6 fine dust paper filters.

Technical Data:
230V. 1,100W. Connection for electric tools from 25 to 2,000W. Container 18l.
With 5m connection cable.
NO 27 490

Fine dust paper filter for CW-matic

For additional filter function. Must be removed
when vacuuming liquids.

NO 27 494 5 pieces

Practical holder for the nozzle included in the scope Fluted filter for CW-matic
of delivery:
Made of polypropylene. Can be cleaned dry or
For retaining the vacuum cleaner hose by inserting the
holder’s 20mm adapter into the universal holder UHZ or clamping its strap
wet.
into any vice.
NO 27 492 1 piece

Drilling device BV 2000

An accurate device for parallel drilling, thread-cutting and
0 8 8 3806
00
milling. Made of high-precision aluminium die-casting.
Design Patent
With two-way pivotable articulated arm and 20mm standard
Al l

N
XO

igh
collar. Once the device is clamped, it always remains vertically
r

ts by PROX

aligned. This means that, e.g. drill holes are always exactly per-
pendicular to the work piece surface! Preselectable drill depth
using depth control with easy-to-read scale. After drilling, an
adjustable spring automatically pulls the device back into its top
rest position.
Plane-milled solid base plate with 200 x 200mm usable table area
and two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
Stable drill column (ø 45mm, 500mm long).

The standard 20mm collar enables precise clamping of the dril-

ling device such as the precision drill/grinder FBS 240/E, profes-
sional drill/grinder IBS/E, long neck straight drill/grinder LBS/E,
MICROMOT 50, 50/E, 50/EF and MICROMOT 230/E.

NO 20 002

Note:
Professional drill/grinder IBS/E and step clamps are not included in
the package.
48
 For engraving letters, numbers and individual shapes.

Engraving device GE 20

Note:
Professional drill/grinder IBS/E and clamping
jaws are not included in the scope of delivery.

With standard 20mm collar for all MICROMOT drilling and Solid carbide stylus for engraving device GE 20
milling units which are equipped with steel collets.
For engraving letters, numbers and individual shapes on metal, plastics, For steel, cast steel, non-ferrous metal, plastic, glass, stoneware and
glass or stoneware. For name plates, jewellery or valuable materials. tiles. Nose angle 60° (for V-shaped letters). Shaft diameter 3.2mm.
Also easy to manufacture miniature, individual shapes, engravings,
cut-outs and outline shapes, even in series, using self-made temp-
lates or commercially available templates (plants, animals, coats of
arms). NO 28 765 Letter width 0.5mm
Guide bar (template holder) holds a maximum of 14 letters. Template NO 28 766 Letter width 1mm
contours are precisely to be followed using the guide marker (ball
handle).
The lettering to be milled is scaled down during transfer. The transfer
ratio can be fixed at 2:1, 3:1, 4:1 or 5:1 by simply adjusting two screws.
The work piece is aligned and fixed on the movable guide block with
Manual for creative model-makers
clamping jaws (here MICROMOT clamping jaw set NO 24 256) or a
Over 370 pages of information and tips from all areas of model building.
vice. All illustrations in colour.
Attractively produced, this book
Scope of delivery: two sets of letters from A to Z, incl. hyphen, full affords a good insight into the areas
stop and slash (total 52 items), one each HX key 1.5 – 3 and 5mm as of materials and their application
Handbuch für
kreative Modellbauer
well as a HX (ball head) screwdriver 2.5mm. Complete with a compre- possibilities. It describes tools and
hensive instruction manual. work techniques in general and
gives comprehensive technical
NO 27 106 explanations concerning MICRO-
MOT devices and available acces-
sories.
A large portion is devoted to practi-
cal tips and a clear appendix of use-
Stencil set for engraving device GE 20 ful tables completes the contents
of this helpful manual.
Letters A – Z, incl. hyphen, full stop and slash. Also numbers 0 – 9. Available in German only !
For use with guide bar of the GE 20. Grundwissen, Anregungen,
Tipps, Tabellen

NO 27 104 NO 28 996

49
 The MICRO miller MF 70 and the MICRO compound table KT 70 are
now also available as CNC-ready version.

MICRO miller MF 70/CNC-ready

With step motors for axes X (transverse), Y (lengthwise) and Z (high) instead of
handwheels.
Interesting for users who already own a control unit or would like to purchase one from
another provider on the market. Step motors and reference point switch with 2.2m con-
necting cable and one each standard plug (SUB-D 9-pole) for X, Y and Z axis. Without CNC
control unit, without CNC software.
Other technical design similar to MICRO miller MF 70 offered at right.
Exception: Larger T-slot table and somewhat longer travel distances X (transverse) and Y
(lengthwise). Including MICROMOT collets (steel, hardened, triple slit), with 1 each of 1 – 1.5
– 2 – 2.4 – 3 and 3.2mm. The illustrated stepped steel clamping jaws are also included in the
delivery.

Technical data:
230V. 100W. 50/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 250 x 70mm. Travel
distances: X (transverse) 150mm, Y (lengthwise) 70mm, Z (high) 70mm. Resolution of step
motors 0.005mm. Total height 370mm. Weight approx. 7kg.

NO 27 112

MICRO compound table KT 70/CNC-ready

Of solid aluminium (surface-compacted), as described at

right. With two step motors for the axes X (transverse)
and Y (lengthwise). Table size and travel distances, see
description of MF 70/CNC-ready.

NO 27 114

Dividing head for MICRO miller MF 70 and Precision steel vice PM 40

MICRO compound table KT 70
For machining circular work pieces, Milled from steel for precision. Completely angular.
manu-facturing off-set holes and milled Jaw width 46mm,
out portions, milling key surfaces, four- clamping capacity
sided, six-sided materials, etc. Absolute 34mm. Total length
accurate division due to nonius at the 70mm. Especially
base body. With reversed chuck jaws: suited for filigree
Capacity inside 1.5 to 32mm, outside 12 and accurate work-
to 65mm. Bore of 11mm (for processing ing with the MICRO
longer spindles in a vertical position). miller MF 70 or the
With fastening bores for horizontal and compound table KT 70. Sliding blocks and fixing screws
vertical mounting and suitable slot nuts included. Comes in a wooden box.
and fastening screws for mounting to the MICRO miller MF 70 and the MICRO
compound table KT 70. Size 72 x 64 x 38mm. In wooden box with sliding lid.
NO 24 264 NO 24 260

50
 Small and beautiful: the accurate miller for lab
technicians, optician, jeweller, electronic/model builder.

MICRO miller MF 70
The accurate miller for delicate projects.
Spindle speeds 5,000 - 20,000rpm.

Continuously variable
speed from 5,000 –
20,000rpm, perfect
for even the smallest
milling cutter.

Cutter clamping
in MICROMOT
Supplied complete with stepped clamp system collets.
blocks of steel. These are shown on page 21
(offered separately).

Table of stable aluminium.

Both axes are fitted with adjustable
dovetail slides.

Stable cast
iron base.

MICROMOT steel collets, triple slit

and hardened, from 1 to 3.2mm.

Handwheels with zero adjustable

scales, 1 revolution = 1mm,
1 division = 0.05mm.

For work with extremely small cutters.

Stable grey-cast iron machine base, vertical guide and compound
table. Free from play, readjustable dovetail gib in all axes. Die-cast
aluminium arm housing, with 24-pin special motor (balanced). For
vibration-free work at high speeds.
The triple slit, hardened steel MICROMOT collets cover 1 – 1.5 – 2
– 2.35 – 3 – 3.2mm. The table is fitted with 3 T-slots of the 12 x 6 x Tungsten milling cutters
5mm MICROMOT norm. An adjustable ruler scale eases the positioning
of the workpiece. With two flute cutters and fishtail profile (cut-
ting to the centre). Enables lowering into
Technical data: non-bored work pieces. For grey-cast iron,
230V, 100W, 50/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 200 hardened cast iron, steel, cast steel, brass, alu-
x 70mm with X-Y travel of 134 and 46mm respectively, with verti- minium, glass, plastic and carbon fibre. One
cal travel 80mm. Footprint size 130 x 225mm and overall height piece each 1 – 2 and 3mm. Shaft diameter
370mm. Weight approx. 7kg. The clamping blocks depicted are 3mm. Can also be ordered separately (see page 23).
included too, but not the workpiece !
NO 27 110 NO 27 116 3 pieces

51
 Light, stable and precise. 2-stage belt drive and additional electronic
5,000rpm. The right cutting speed for even the smallest pieces.

Precision lathe FD 150/E

For face turning, longitudinal turning, boring, taper turning, slicing and drilling.
Complete with 3-jaw chuck and live centre.

/ 07817
DM 5

Design Patent

Al l

N
XO
igh

r
ts by PROX

Centre distance 150mm. Swing 55mm. Height over cross slide 33mm.

Machine bed with dovetail guides of continuous casting aluminium. Processing via top slide (60mm, travel distance Z) and cross slide (40mm,
travel distance X). The angle adjustment of the upper carriage makes it
Die-cast aluminium spindle headstock. With quiet special DC mo- possible to turn tapers up to +/- 45°.
tor, 2-stage belt drive and additional electronic speed control for
high engine power at low speeds for larger work pieces and for Handwheels with zero adjustable scale ring (1 division = 0.05mm, 1 revo-
the appropriate cutting speed, even for the smallest pieces. Main lution = 1mm).
switch with emergency stop function and restart protection. Preci-
sion bearing mounted main spindle with continuous 8.5mm bore. Other technical data:
Chuck fit for standard ER 11 type collets. 230V. 50/60Hz. Distance between centres 150mm. Swing 55mm.
Height over cross slide 33mm. Cross slide travel (X) 40mm, top slide tra-
Three-jaw chuck, self-centering (inside jaws 1 – 20mm), outside jaws 20 vel (Z) 60mm. Steel tool post for turning steels 6 x 6mm. Spindle bore
– 60mm). 8.5mm. 2-stage belt drive with electronic speed control: Stage 1 = 800
– 2,800rpm. Stage 2 = 1,500 – 5,000rpm. Dimensions approx. 360 x 150 x
Die-cast aluminium tailstock with spindle and live centre (fitting MK 0/ 150mm. Weight 4.5kg. Insulated to class 1.
short).
NO 24 150
Support: To be shifted manually on the bed and clamped with lever.
Rotating tool post for turning steels 6 x 6mm.
52
 Drill sharpener BSG 220
control enables spindle speeds up to
Easy sharpening of drill bits from 3 to 13mm diameter,
standard angle of 118°.

6-piece turning tool set. Made of high-quality

cobalt HSS steel. Ground.
One each boring, roughing out, par-
ting, finishing, right and left cutter.
Size 6 x 6 x 65mm. For FD 150/E, sup-
plied in wooden box.

NO 24 524 6 pieces

Drill chuck. Capacity 0.5 – 6.5mm.

Industrial quality with high concentricity
(allowed up to 10,000rpm).
Complete with arbour B 10 x MK 0/short.
For the tailstock of the FD 150/E. Note:
Operating the Drill sharpener BSG 220 is quite simple. Also untrained
NO 24 152 users will be able to re-sharpen spiral drills according to DIN. In order to
obtain satisfactory results though, it is important to study the product
manual attentively before working with this machine. Starting without
reading these relevant instructions, one will not be able to achieve the
Multiple range standard ER 11 type collets (DIN expected precision.
6499/B)
The sharpening operation is controlled exactly by means of the
Offering high concentricity. May be redu- movable carriage.
ced up to 0.5mm below their nominal dia- This moves from left to right and
Dressing the stone.
meter (intermediate sizes not required). also rotates the drill bit on its own
D = 11.5mm, L = 18mm. One each of 2. – 2.5 – 3 – 4 – 5 – 6 and 7mm axis. This operation yields the cor-
are included. With clamping nut M 16 x 1. Suitable for the main spind- rect relief angle. The carriage is fit-
le of the FD 150/E. Supplied in a wooden box. ted with a feed screw for fine feed.
A dressing stone, ensuring a sharp
NO 24 154 7 pieces cutting surface, is also fitted.

Other technical data:

230V, 85W. Corundum grinding disc size 50 x 13mm. ABS housing
with fixing holes. Weight 1.7kg. An easy to understand operating
Chip collecting tray with splash guard for the manual and replacement disc accompany the unit. For further spare
discs see page 36.
FD 150/E
Of 1.5mm thick sheet steel, powder-coated. Bevelled edges at the front NO 21 200
and back enable easy cleaning.
Pre-drilled mounting holes for the secure stability of the FD 150/E. L 400
x W 165 x H 140mm. The lathe depicted here is not included in the scope
of delivery.

NO 24 156 Adapters for sharpening of small drill bits

These adapters extend the BSG 220’s

range to cover 1.5 - 3mm. One each
adapter for sizes 1.5 – 1.6 – 2 – 2.4
– 2.5 and 3mm. Neatly packed in a
wooden box with sliding lid.

NO 21 232

53
 Precision lathe PD 250/E. The new generation with system accessories.

For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, alumini
for fastening the mill/drill head PF 230.

/0 7 830
DM 6

Design Patent

Al l

N
XO
igh

r
ts by PROX

Centre distance 250mm. Swing 70mm. Height over cross slide 43mm.
Machine bed: Of cast iron, wide-legged prismatic guide. For vibrati- ratio. Clockwise - anticlockwise rotation. Main switch with emergen-
on-free work even at high loads. Rear flange for mounting the mill/ cy stop function and restart protection.
drill head PF 230. Covered lead spindle.
Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (con-
Headstock: Of die-cast aluminium. Precision bearing mounted main centricity tolerance 0.04mm). Capacity through reversing jaws from
spindle (run-out without chuck 1/100mm) with 10.5mm opening. 2 - 75mm. Including lathe chuck guard with safety shutdown.
Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch
for engaging the automatic feed via lead and feed spindle (optionally Handwheels: Of aluminium, with adjustable scale ring (1 division =
0.05 or 0.1mm/rev.). 0.05mm, 1 revolution = 1mm).

Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to Thread cutting device: With change gears for left-hand and right-
30mm. With millimetre scale, MK 1 bore and live centre. hand threads of the most important metric pitches (0.5 – 0.625 – 0.7
– 0.75 – 0.8 – 1 – 1.25 – 1.5mm).
Support: Bed carriage made of die-cast zinc. Cross slide and top slide
of steel (adjustment 60 or 45mm). Turning tool post for cutting tools Other technical data:
size 8 x 8mm. 230V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Drive: Quiet DC special motor with 3-stage belt drive for 300 – 900 NO 24 002
and 3,000rpm. With additional speed control (full-wave electronics)
continuously adjustable to 100 – 300 or 1,000rpm, depending on belt

54
Made in Europe!

Collet set with ER 20 collets:

For extreme true concentric accuracy. 2 – 10mm.
um and plastic. Mounting flange

For high precision machining of round parts. The collet set is

mounted instead of the lathe chuck. With 8 collets (2 – 2.5 – 3 – 4
– 5 – 6 – 8 and 10mm). Packed in a wooden box.
NO 24 038

4-jaw chuck with independent jaws

For clamping angular and asym-
metrically shaped work pieces.
Capacity up to 80mm. Chuck Ø
75mm.

NO 24 036

Centre turning attachment. For highest accuracy

with high rotational precision.
This includes:
1 face plate, 2 fixed centres (MK 2
and MK 1/short) and 1 drive dog.
Packed in a wooden box.

NO 24 014
Note:
The work piece pictured here
is not included in the delivery !
Professional gear chuck with MK 1
For the tailstock of the PD 250/E.
Capacity up to 10mm.

NO 24 020

Quick change tool post – easy to use ! Fixed steady for longer work pieces
For quick tool change and
easy height adjustment. Inclu- Especially for boring. Also requi-
des 2 tool holder elements. red if the tailstock cannot be used
NO 24 026 to „counter“. Up to Ø 40mm.

Additional quick change tool holder (separately) NO 24 010

Can be used with the above above-mentioned quick change tool post.
NO 24 024 piece
55
 Lathe system PD 250/E. Versatile and expandable.
Precision made in Europe.

Chip collecting tray with splash guard for lathes PD 230/E and PD 250/E

Made from 1.5mm thick sheet metal, powder

coated. Bevelled edges at the front and back
allow slight clean-ing. Mounting hole and
raised base to secure lathe are pre-drilled. The
depicted lathe is not included in the offer.

L 495 x W 215 x H 150mm

NO 24 006 for PD 230/E

L 550 x W 240 x H 160mm

NO 24 008 for PD 250/E

Dividing attachment TA 250

For lathe PD 250/E, MICRO miller PF 230 and FF 230
For accurate machining of circular work pieces (e.g. production of gear wheels). Supplied with two
divid-ing discs (40 and 48 teeth), enabling standard divisions of 2 – 3 – 4 – 5 – 6 – 8 – 10 – 12 – 16 – 20 –
24 – 40 und 48. The taper of the dividing attachment is the same size as that of the main spindle of the
PD 250/E lathe, thus 3 jaw chuck (to be ordered separately under NO 24 034, see below) and 4 jaw
chuck (NO 24 036, see page 55) may be mounted. Horizontal fitting (e.g. on the cross-slide of the lathe)
and vertical fitting (on the machine bed) are possible. With matching nuts and screws for fixation in
MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid. The 3 jaw chuck
depicted here is not included in the scope of delivery.
NO 24 044

Self-centering 3-jaw chuck

Identical to chuck of lathe PD 250/E (page 54). High quality clamping fixture as per DIN 8386, Class 1 (con-
centricity accuracy 0.04mm). Capacity through reversing jaws from 2 – 75mm. Suitable for PD 250/E and the
dividing attachment NO 24 044.
NO 24 034

Mill and drill head PF 230

Converts your lathe PD 250/E or PD 400 into a
complete machining centre.

Incudes column (35 x 400mm), mounting bracket and

fastening screws (the PD 250/E and PD 400 already come
with a plane-milled surface).

The lathe’s top slide is replaced with the table (supplied)

of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe
now functions as a compound table, with X-Y travel
being longitudinally and cross-wise respectively. The
mill/drill head is identical to the MICRO miller FF 230 (see
page 57). Three collets of sizes 6 – 8 and 10mm are inclu-
ded.

NO 24 104
56
 A small, high accuracy machining system to mill,
drill and bore.

MICRO miller FF 230

Handwheel for height
adjustment.

The headstock swivels through 360°, indicated on

a scale.
Height is adjusted via a zero adjustable handwheel,
also used as fine feed when milling (one revolution
equals 1mm travel). The quill and headstock may be Poly-V drive system offers
locked in position, essential when milling. The power- 6 speeds between
ful motor effects drive via a poly-V belt, yielding high 280 and 2,200rpm.
torques, especially at lower speeds. Collets of 6 – 8
and 10mm are included. The solid table is T-slotted to
the MICROMOT standard of 12 x 6 x 5mm.

Other technical data:

230V. 140W. 50/60Hz. Spindle speeds of 280 – 550
– 870 – 1,200 – 1,500 and 2,200rpm. 30mm travel.
Table size 270 x 80mm, column 35 x 400mm long. X-Y-
travel is 170 x 65mm. Maximum height 180mm and
depth 130mm. Overall height approx. 500mm. Weight The fine step feed is
approx. 17kg. not included.
NO 24 108

The clamps (not included) are described

on page 64.

Note:
For more lathe and milling accessories and bits
and cutters, see pages 64 /65.

Important!
For clean milling we recommend to clamp the
quill as well as the headstock onto the column.
With the FF 230 this is easily done with the Handwheels with zero
clamp. adjustable scale
(1 rev = 1.5mm,
1 division = 0.05mm).

Compound table KT 230 Fine feed for milling machine PF 230 and
MICRO miller FF 230
As described above, but excluding headstock and column. With
34mm bore to mount the PF 230 mill/drill head (the end fitting of Easily installed in a few seconds.
the mill head‘s 35mm column is machined to 34mm). The feed may be used via either the height feed (vertical) or the fine
NO 24 106 feed in the tilted position.
The graduated scale may be
zero reset. One revolution is
equivalent to 1.5mm spindle
travel (1 division = 0.05mm).
Five piece collet set for PF 230 and FF 230
Includes 1 each of 2.4 – 3 – 3.2 – 4 and 5mm, for milling cutters.
Supplied in a wooden box with sliding lid.
NO 24 144 NO 24 140

57
 Precision made in Europe. As per DIN 8606.
The heart of a system, versatile and expandable.

Precision lathe PD 400 Note:

Accessories and insertion tools for the PD 400
system, see pages 59/60.

Main switch with auto-start protection

and emergency off.

With rotating centre MK 2

and tailstock chuck.

Precision lathe chuck as Quick-change tool post with

per DIN 6386 (Ø 100mm). 2 holders (with stop and
height adjustability).

Switch for clockwise, off Quick-change tool post with

Selector and counter-clockwise 2 holders (with stop and height
for auto-feed. rotation. adjustability).

Centre distance 400mm. Swing 85mm. Height over cross slide 58mm.

For machining steel, brass, aluminium and plastic. For face and 40mm. With mm scale. With live centre MK 2 and 10mm gear tooth
straight turning, taper turning and thread cutting. With an exten- chuck (B 12 - bore/MK 2).
sive range of system accessories you can also drill, mill and slot.
Support: Bed carriage made of die-cast zinc. Cross slide (adjustment
Machine bed: Of high quality cross-braced cast iron with wide-legged, 85mm) and top slide (setting range 52mm) of steel. Top slide can be
prism slides. For vibration-free work even at high loads. With flange swivelled for taper turning (degree graduation up to 45° available).
and threaded holes at back for fastening the drill and mill head PF 400. With multiple tool posts and two tool post elements for quick change
Covered lead spindle. and easy height adjustment. For turning tools 10 x 10mm.

Headstock: Of die-cast aluminium. Oversized main spindle with two Drive: Powerful capacitor motor for two speeds and additional three-
adjustable taper roller bearings and MK 3 bore on chuck side. Spindle stage belt drive. Spindle speeds at stage 1: 80 – 330 – 1,400rpm. For
bore 20.5mm. Run-out without chuck 1/100mm. Rotary switch for stage 2: 160 – 660 and 2,800rpm.
engaging the automatic feed (optionally 0.07 and 0.14mm/rev.). Lead
and feed spindle with trapezoid threading (12 x 1.5mm). Lathe chuck: High quality 3-jaw chuck as per DIN 6386 Class 1 (con-
centricity tolerance 0.04mm). Capacity through reversing chucks 3 –
Tailstock: Of die-cast aluminium. Sleeve Ø 24mm, retractable up to 100mm. Including lathe chuck guard with safety shutdown.

58
 Insertion tools and additional accessories for the PD 400 system are
described on pages 60, 64 and 65.

Tool post
Including two holders. Provides quick tool changes
with easy height adjustment. For turning tools 10 x
10mm.
NO 24 415

Individual quick-change holder

Fits the tool post of PD 400.
A tool holder with two adjustable
NO 24 416
inserts is included as standard.

4 jaw chuck with independent jaws

Aluminium handwheels with Used to mount irregularly and asymmetri-
adjustable graduated collar cally shaped objects. Each jaw is adjusted
made from steel. individually and centering is thus achieved
manually. Hardened, reversible jaws. Chuck
diameter 100mm.

NO 24 410

Cross-braced cast iron bed,

wide-legged shape, and prism slides
for apron and tailstock.

4 jaw chuck, self-centering

The jaws are not independently adjustable,
i.e. they are self-centering. High accuracy.
Note: Chuck diameter 100mm.
The lathe PD 400 is also available as
Protected lead screw with CNC version. See page 63. NO 24 408
12 x 1.5 Acme thread.

Handwheels: Of aluminium, with scale ring adjustable to 0. For cross

slide and top slide: 1 division = 0.025mm. 1 rev. = 1mm. For tailstock
and lead spindle: 1 graduation line = 0.05mm. 1 rev. = 1.5mm.

Support quick adjustment: By means of large handwheel fastened to

bed by toothed rack.

Thread cutting device: For left-hand and right-hand thread. With

change gears for 19 different metric pitches: 0.2 – 0.25 – 0.3 – 0.35 – 0.4
– 0.45 – 0.5 – 0.6 – 0.7 – 0.75 – 0.8 – 0.9 – 1 – 1.25 – 1.5 – 1.75 – 2 – 2.5 –
3mm. Also for inch threads from 10 – 48TPI. Faceplate and clamps
Is fitted instead of the standard chuck. Ideal
Other technical data: for clamping larger and asymmetrically
230V. 50/60Hz. Size L 900, W 400, H 300mm. Weight approx. 45kg. shaped work pieces. Ø 125 mm. 2 continuo-
Motor rated input 870W, power output 550W, motor speeds 1,400 us T-slots. With clamping jaws.
/ 2,800rpm.
NO 24 400 NO 24 412
59
 Carefully thought-out accessories for the PD 400 lathe system
solve milling and turning problems.

Fixed steady to support longer pieces for

PD 400
Used on the PD 400 when turning long, slender work
Splash guard and chip collecting tray for lathe PD 400 pieces. Fitted directly to the bed-ways and is used
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. when the tailstock support is inadequate. Maximum
Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of Ø 50mm.
coolant is impossible. Length 800 x width 270 x height 290mm. NO 24 404

NO 24 402

Collet attachment with collets for PD 400

For accurate use on round components. One harde-
ned collet each hardened collet 2 – 3 – 4 – 5 – 6 – 8
– 10 – 12 and 14mm are included. Concentric accuracy
better than 0.02mm, much better than a chuck. One
soft collet for making a custom size yourself. The
included collet attachment is mounted in the place
of the headstock chuck.
Supplied in a wooden box.
Travelling steady for PD 400
Fitted to the carriage of the lathe. Indispensable
NO 24 419 complete when turning long, slender work pieces.
Maximum Ø 50mm.
NO 24 406

Mill/drill head PF 230 for lathe PD 400

This mill/drill head’s construction is identical to our PF 230. For mounting on previous
models of the PD 400 two tapped holes need to be drilled into the lathe’s bed. Future
PD 400s will come equipped with these two tapped holes. For technical details of the
PF 230 please refer to the description on page 56/57.

NO 24 104

Centre turning accessory for PD 400

Ideal when turning with highest possible accuracy.
Supplied with 2 dead centres (MK2 and MK3), drive/
face plate with 30mm bore as well as reducing
bushes 30/20mm and 30/15mm. A threaded drive
pin screws into the headstock flange and the drive
plate.

NO 24 414

Gear tooth chuck (10mm).

With adapter for PF 400.
Industrial quality, however not as accurate as the
collets. With 10mm adapter which fits into the
10mm collet. Includes the chuck key.

NO 24 110

60
 MICRO miller for precision work to 0.05mm accuracy!
Quiet, looking good and multifunctional.

8 3 0- 0
883
MICRO Miller FF 500
00
00

1
0
Design Patent

Al l

N
XO
igh

r
ts by PROX

Drive: powerful, quiet

condenser motor.

Poly-V belt drive for 6 spindle

speeds between
180 and 2,500rpm.

Splash guard and chip collecting tray for PROXXON

milling machines
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due
to drill holes for fastening to a work surface (the use of steel sleeves
keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
NO 24 322

During milling
Solid column operation the spindle
with dovetail guides. sleeve may be clamped
with a t-screw.

Clamping jaws, miller and

work pieces are not
included in the delivery. Note:
The MICRO Miller FF 500 is also
available as CNC version
(see page 63).

A machining centre for milling, drilling and countersinking.

With solid column of aluminium continuous casting.
Milling head can be pivoted to the left and right by 90° (with degree graduation). Simple
pre-selection of rotational speed by shifting the Poly V-belt. Switch for clockwise and counter-
clockwise rotation. Sleeve feed (30mm) via lever with scale ring (1 graduation = 1mm).
Tool holder using multiple range standard ER 20 type collets (DIN 6499-B): One each of 6 – 8
– 10 and 12mm are included (detailed description see below). Extension height adjustment
using hand wheel with scale ring (1 rev. = 2mm). Solid, plane-milled steel compound table
with three continuous MICROMOT standard T-slots (12 x 6 x 5mm).
Technical Data:
230V. 400W. 50/60Hz. Spindle speeds 180 – 350 – 550 – 800 – 1,300 – 2,500rpm. Throat (to
spindle centre) 125mm. Sleeve stroke 30mm. Column 120 x 100 x 420mm. Table 400 x 125mm. Fine feed for accurate adjustments
Traverse range vertical (z-axis) 220mm, transverse (x-axis) 310mm, depth (y-axis) 100mm. Total
height max. 780mm. Weight approx. 47kg. during milling for FF 500
NO 24 320 Quick and easy to install. The clutch
system enables feed via either the drill
Multiple range standard type ER 20 collets (DIN 6499-B) handle or the handwheel.
For the Mill/drill PF 400 (from production no. 401-10910) and MICRO Miller FF 500 (from pro- The handwheel has 0.025 graduations
duction no. 5648). High concentricity and repeat accuracy. May be reduced to 0.5mm under and may be set to zero. 1 division =
their nominal diameter (intermediate sizes not required). D = 21mm, L = 31.5mm. One each of 0.05mm.
2.5 – 3 – 3.5 – 4 and 5mm are included. Supplied in wooden box with sliding lid.
NO 24 253 NO 24 254
61
 Digital position indicator for the MICRO Mill FF 500 and other
lathes and milling machines.

Digital position indicator DA 3.1

With large multi-function display, 3 glass rulers
(with one sensor each) and fastening elements.
Reasonable for repetitive machining: A second start
point in addition to the zero point can be set any-
where. Most important computing functions:
- Calculation and indication of a centre position
- Basic arithmetic operations
- Positioning of drill holes on any straight lines and
circular paths
- Milling of crooked planes
- Milling of radii in different planes

Technical data:
Digital display 265 x 182 x 48mm for 110 – 230V.
50/60Hz. Glass rulers for travel distances: vertical
(z-axis) 220mm, transverse (x-axis) 300mm, depth
(y-axis) 100mm. With a 200cm metal-sheated plug
connecting line to the display.

NO 24 323

MICROMOT adapter
For use with high-speed MICROMOT rotary tools
in combination with the MICRO millers FF 500 and FF 500/CNC. And especially for use with the
MICRO Miller FF 500/CNC. The standard milling head is exchanged for the adapter in just a few
steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 50 series, the MICROMOT
precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially
for applications that require high speeds for small milling cutters (e.g. milling electronic boards),
but also for micro drilling. Complete with fastening screws.

NO 24 346

Universal dividing table UT 400

For accurate machining of circular work pieces.
The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing
for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and
36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate
is not included). The taper is identical to the main spindle of the lathe. With matching nuts and
screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm).
Supplied in a wooden box with sliding lid.

NO 24 421

Self-centering 3-jaw chuck

Identical to the lathe chuck of lathe PD 400. Capacity through reversing chucks 3 – 100mm.
NO 24 407

62
 CNC systems made in Europe.
Precision with high repeat accuracy !

MICRO Miller FF 500/CNC

Complete with CNC controller and user-friendly software (runs
under WINDOWS®).
Double roller bearing mounted recirculating ball spindles on all
3 axes and 3 powerful step motors. Large travel distances: X-axis
approx. 290mm, Y-axis approx. 100mm, Z-axis approx. 200mm.
The mechanical design is almost identical to the MICRO Miller
FF 500 (see page 61).

NO 24 340

Note:
The MICRO Miller FF 500 is also available as ready for CNC version, wit-
hout controller and without software. Connection to the controller by
three standard plugs (SUB-D 9POL).

Note:
For the lathe system PD 400/CNC and the MICRO Miller FF 500/CNC
there is a special brochure with detailed description, which you
may inquire for under NO 95 157 (German) or NO 95 372 (English).
Or just visit our website at www.proxxon.com !

Lathe PD 400/CNC
Also this machine is supplied complete with
CNC controller and user-friendly software (runs
under WINDOWS®).
Axle drive via two powerful step motors and recircu-
lating ball spindles. The mechanical design is almost
identical to the proven PROXXON Lathe PD 400 (see
pages 58/59).

NO 24 500

Note:
You will find these tools with a more detailed
description on page 50 of the catalogue !
MICRO miller MF 70/CNC-ready
Interesting for users who already own a control unit or would like to
purchase one from another provider on the market. With step motors for
axes X (transverse), Y (lengthwise) and Z (high).

Also available individually:

MICRO compound table KT 70/CNC-ready
With two step motors for the axes X (transverse) and Y (lengthwise).

63
 Accessories and tools for the lathe systems FD 150/E, PD 230/E, PD 250

Nearly all accessories are supplied in wooden boxes. For proper and value preserving
storage !
Radius cutting attachment
Is mounted on the cross slide in place of the tool holder. For producing convex
and concave shapes, for turning radii or 3/4 spheres up to max. 32mm.
Height adjustable tool holder (boring
tool tip adjustable from 30 through
45mm above cross slide) for use with
FD 150/E, PD 250/E, PD 400 and older
PROXXON lathes. Dimensions: base
plate 67 x 50mm, height 55mm. Com-
plete with finishing cutter 8 x 8 x 80mm.
In wooden box with sliding lid.
NO 24 062

Tool holder for rotary tools. Step clamp set of steel Die holder for round dies
For use on lathe machines.

Made of steel with standard 20mm

MICROMOT collar size.
For precise clamping of rotary tool IBS/E or
LBS/E in the tool post of the lathe. Shaft 8 x
10mm. Total length 65mm.
NO 24 098 2 step blocks and clamps each. For threads M 3 – 4 – 5 – 6 - 8 and 10.
With matching slot nuts and fastening With holder Ø 10mm for mounting in the
screws for T-slots as per MICROMOT stan- tailstock drill chuck of the lathe. The holder
dard (12 x 6 x 5mm). In wooden box with is held by hand while cutting the threads.
Precision-milled steel machine vices. sliding lid. Neatly packed in wooden box with sliding
Perfectly rectangular. To be placed side- For work pieces up to 20mm thickness lid.
ways and on the end face. With matching NO 24 256 NO 24 082
nuts and screws for fixation in MICROMOT For work pieces up to 35mm thickness
standard T-slots (12 x 6 x 5mm). Supplied in NO 24 257
wooden box with sliding lid.

Precision vice PM 40 Precision V-blocks 14-piece parallel supports set

Jaw width of 46mm. Clamping capacity

34mm. Total length 70mm.
NO 24 260

Precision vice PM 60
Ground in pairs.
Used to clamp various work pieces. For adjusting work on drilling machines,
Made from hardened steel, precision ground lathes and milling machines.
in pairs. Four different depths of prism inci- Made of high-alloy, hardened steel (58 – 62
sions V, all at 90°. Size 50 x 30 x 30mm. The HRC). Parallel accuracy 0.002mm.
solid clamp and knurled knob ensure superb 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm.
securing of the workpiece. Length 100mm. Packed in a wooden box.
Jaw width 60mm. Clamping capacity 42mm. Supplied in a wooden box with sliding lid.
Total length 100mm. NO 24 266
NO 24 255 NO 24 262 2 pieces

64
/E and PD 400

Milling cutter set (2 – 5mm) Cutting tools of high quality cobalt Cutter set with tungsten inserts for
All cutters with 6mm HSS steel, ground. PD 230/E, PD 250/E and PD 400
shaft. Cutters of
Ø 2 – 3 – 4 and 5mm.
Double fluted according
to DIN 327. Made of HSS.
Comes in wooden box
Five piece set
One each roughing out, parting, finishing
with sliding lid.
cut, left and right cutter. Comes in
NO 24 610
wooden box with sliding lid.

Milling cutter set (6 – 10mm)

4 cutters Ø 6 – 7 – 8 and 10mm. Four flute   ‘
design according to DIN Three holders (90mm long)
844. Shafts 6 and 10mm { for roughing out;
respectively. Made of | for longitudinal work;
HSS. } for 90mm boring bar, holes from 12mm.
Comes in wooden box Standard tungsten inserts, 55°, plated (com-
with sliding lid. mercially available version). Three additional
inserts securing screw and key TX 8 are inclu-
NO 24 620 ded.
NO 24 555 8 x 8mm
8 x 8 x 80mm (for PD 230/E and PD 250/E) (for PD 230/E and PD 250/E)
Three piece centre drill set NO 24 530 NO 24 556 10 x 10mm
10 x 10 x 80mm (for PD 400) (for PD 400)
Made of HSS steel. DIN NO 24 550
Tungsten disposable tips
333 (type A) 60°. Com-
For the holders as described above.
plete set centre drills
NO 24 557 Ten piece set.
with sizes of 2 – 2.5 and Three piece thread cutting set
3.15mm. One cutter for external thread (ground to
60°, metric) one for internal thread, one HSS boring tool set,
NO 24 630 general cutting. Comes in wooden box 6 pieces
with sliding lid.

Edge finder set

One each cutter for 60 degree (metric)

and 55 degree (Whitworth) inside threads,
Used for fast and accurate location of star-
1.3mm – 2.65mm and 4mm. Shaft of Ø
ting point of work pieces with respect to
6mm. Length 95mm. The cutters are held
the machine spindle on milling machines.
by a tool holder (8 x 8mm) that mounts
Size 6 x 6 x 50mm and 6 x 5 x 75mm.
8 x 8 x 80mm (for PD 230/E and PD 250/E) to the tool post of either the PD 230/E, PD
Comes in wooden box with sliding lid.
NO 24 540 250/E or PD 400.
10 x 10 x 80mm (for PD 400) Comes in wooden box with sliding lid.
NO 24 434
NO 24 552 NO 24 520

Parting tool holder and tool

Used in the PD 400 quick- Cutting tool set for precision lathe FD 150/E.
change system. Used to Made of high-quality cobalt HSS steel. Ground, 6-piece.
part stock and cut slots.
The 12 x 3 x 85mm HSS
tool contains cobalt. One each boring, roughing out, parting, finishing, right
and left cutter. Size 6 x 6 x 65mm. For FD 150/E.
NO 24 417 Comes in wooden box with sliding lid.

NO 24 524 6 pieces
Spare tool for parting tool holder
As described above.
NO 24 554

65
 Complete work centre for milling and drilling: mill/drill unit
BFB 2000, compound table KT 150 and mill/drill system BFW 40/E.

Mill/drill system BFW 40/E, with controller for speeds of 900 - 6,000rpm.
The triple ball bearing armature provides direct drive (no gearing).
Die-cast aluminium head with spindle neck of 43mm (European
standard). Large, easy to use switch with emergency function. Chart
indicates optimum speeds for milling and drilling of various materials. Note:
The motor operates at 40V, supplied from the power pack/
controller. At this level, the control characteristics are ideal
Other technical data: and yield high torque,
Control unit with full wave electronics for 230V, 40VDC secondary even at lower speeds.
voltage. Power consumption up to max. 250W. (The compound table, drill stand
Spindle speed infinitely and step clamps are not included.)
variable between 900 and
6,000rpm. Complete with
triple slit, hardened collets
covering 2.35 – 3 – 3.2 – 4 – 5
and 6mm as well as 2 spanners.

NO 20 165

Die-cast aluminium compound table

KT 150
With precision milled dovetail slides, thus also suitable for
metal work.
For routing, milling, slotting of steel, non-ferrous metals, plastics
and wood. Each slide provided with locking screws. With re-adju-
stable dovetail guides to eliminate play. Feed adjustment by means
of 2 handwheels with graduated, zero-adjustable dials (1 revolution
= 2mm feed, 1 graduation = 0.05mm feed). Plane-milled table.
Three continuous MICRO-
MOT standard T-slots (12
x 6 x 5mm). Fence with
pre-drilled positioning
holes, fastening screws.
A practical screw clamp
used when routing. Table
200 x 200mm. Maximum
BFB 2000,
travel 150 x 150mm. Ove-
see page 67.
rall height 75mm. Weight
4.9kg. The step clamps depicted on the right are not included in the
scope of delivery.

NO 20 150

66
 High strength precision die-cast aluminium,
with precision milled dovetail slides.

Mill/drill unit BFB 2000

For standard drills with 43mm spindle neck.
With scale Horizontal application

Head feed adjustable

to fine feed by Head may be tilted e.g. for slot
means of lever. through 90°. milling.

Adjustable zero
position for fine feed.
Head tilts through 90°, thus offering a multitude of capabilities:
Diagonal drilling, versatile milling without need of special milling
bits, milling of diagonal slots.
Fine feed selectable allowing fine head feed for milling. With dial
and depth scale. Geared rack and pinion feed for effortless drilling.
45mm diameter drill column, 500mm long. Approx. 140mm throat
(column outside to tool centre). 65mm stroke. Plane-milled, solid
base plate approx. 200 x 200mm with two continuous MICROMOT Selectable
standard T-slots (12 x 6 x 5mm). Easy clamping of all common drills Milled, adjustable fine feed
with standard 43mm spindle collar. Weight approx. 6.5kg. dovetail slide. with lever.

NO 20 000

Note:
Our designers prefer die-cast aluminium. A refined, rust-
proof and statically solid material. Fittings and feeds are
machined on our highly modern CNC-controlled machines
(milled, line-bored, lathed, etc.). Pure precision !
Clear, easily
legible depth
scale.

Sturdy, plane-milled
You will find precision machine vices PRIMUS 75 work table with 2
MICROMOT standard
and PRIMUS 100 on pages 46/47 of this catalogue.
T-slots (12 x 6 x 5mm).

67
 NO 95 310/PR202216204K

© by PROXXON S.A., L-6868 WECKER

The fine tool company !

Steinicke, Wittlich
PROXXON GmbH
Industriepark Region Trier
Dieselstraße 3 - 7
D-54343 Föhren
Tel.: +49 (0) 65 02 – 93 17 – 0 • Fax: +49 (0) 65 02 – 93 17 – 200
E-mail: export@proxxon.com • www.proxxon.com



A separate 34-page catalogue is available for PROXXON INDUSTRIAL hand tools.

It is available free of charge from the above address.

Due to the continuous and ongoing development of our products, we reserve the right to make technical changes. We cannot exclude errors.