M

GEARED MOTOR - M SERIES

GEARED MOTOR FOOT MOUNTED - MHM

GEARED MOTOR FLANGE MOUNTED - MWM/MVM

GEAR UNIT FOOT MOUNTED - MHF

GEAR UNIT FLANGE MOUNTED - MWF/MVF

GEAR REDUCER FOOT MOUNTED - MHD

Gearing the
Wheels of Success
INTRODUCTION

HINDUSTAN GEARED MOTORS

“Hindustan” a leading electric motor manufacturer in INDIA producing more than 250,000 3 phase motors at 4 different manufacturing
locations.
As a forward integration, we are now introducing new “M” series, inline helical geared motors having range of 0.25 to 75.0 HP (upto 7,000
Nm). These geared motors have footprints similar to world renowned make.

GEAR CASE
The gear case and end covers are made of high quality closed grain cast iron grade FG 200, IS: 210. The components are accurately
machined so as to be fully oil tight and dust proof. The design of housings provides a great amount of torsional rigidity and noise absorption.

GEARS AND PINIONS

Gears and pinions are of helical type designed to transmit high torque with smooth running and maximum efficiency under all types of
abnormal operating conditions. They are made from special alloy steels hardened and ground to the highest standard and checked to be
free from all possible defects and errors.

SHAFTS AND BEARINGS

Input and Output shafts are made out of special alloy steels toughened and accurately machined to close limits. Bearings are adequately
selected to ensure longer life, smooth operation and to withstand high fatigue and shock loads.

LUBRICATION
The gear units have a splash lubrication arrangement. Thus no special care is required except occasional topping up of the oil to the
required level. The gear unit is provided with an oil level indicator, drain plug and a breather plug.
After about 5000 operating hours, the oil as well as the bearing grease should be changed. As the lubricant ages even in gear standstill and
may become hard, a change of the lubricant, not depending on the actual operating time, should be made at latest after 3 years.

RECOMMENDED LUBRICATING OIL

Ambient Temp. (°C) ISO VG Mobil Shell Castrol
-30 to -15 VG 100 Mobil Gear 627 Omala 100 Alpha Zn 100
-15 to -3 VG 150 Mobil Gear 629 Omala 150 Alpha Zn 150
-3 to 23 VG 220 Mobil Gear 630 Omala 220 Alpha Zn 220
23 to 40 VG 320 Mobil Gear 632 Omala 320 Alpha Zn 320
40 to 50 VG 460 Mobil Gear 634 Omala 460 Alpha Zn 460

ELECTRICALS
“Hindustan” Geared Motors are fitted with “Hindustan” TEFC squirrel cage induction motors suitable for 415 volts, 3 phase, 50 Hz AC Supply
having IP55 protection as per IS:325 with class F insulation.
Special purpose motors such as brake motors, multispeed motors and motors with alternate protection and class of insulation can also be
provided on request.

TESTING
All components undergo strict quality control checks at various stages of production. The assembled units are finally tested for noise, oil
level and temperature rise.
The result leads to a robust, compact & smooth running unit which has a longer life and requires minimum maintenance.
TYPE OF LOAD ACCORDING TO TYPE OF APPLICATION

I UNIFORM – Steady, no shocks, small II MODERATE – Irregular, moderate shocks, III HEAVY – Irregular, violent shock, large
masses to be accelerated medium masses to be accelerated masses to be accelerated

Drilling machine Balancing machine Plate shear

Filling Machine Bending machine Centrifuge
Bottle cleaning & filling machine Turning lathe Proof press
Fan belt conveyor Rotary table drive Moulding machine
Centrifugal pump Mixer Piston pump
Fan Heavy agitator Stamping press
Assembly belt Packing machine Paper cutting machine
Light weight mixer / stirrer Cement mixer Crusher
Inclined elevator & conveyor belt Tumbling barrel Oscillating belt conveyor
Embroidery machine Kneader Rubber industry roller
Machine tool feed Crane & hoist drive Folding machine
Work piece drive Freight elevator Eccentric press
Washing machine Sliding door Mechanical hammer
Screw Conveyor Brick work machine Articulated plate conveyor
Lifting platform Mining fan Concrete work
Valve Control Gear and rotary pump Rolling mill
Flour / dal mill Welding rig

SERVICE FACTOR (F)

Operation 4 hours 8 hours 16 hours 24 hours

Starts/hour <10 10-50 >50 >10 10-50 <50 >10 10-50 <50 >10 10-50 <50

I 1.0 1.2 1.4 1.1 1.4 1.6 1.2 1.5 1.7 1.3 1.8 1.8
Classification
Load

II 1.3 1.5 1.8 1.4 1.6 1.8 1.5 1.8 2.1 1.6 1.9 2.1

III 1.5 1.8 2.0 1.8 2.0 2.2 1.9 2.2 2.4 2.1 2.3 2.5

For daily operating periods upto 4 hrs & if flexible couplings & belt drives are being used, lower service factor F can be chosen. For very
heavy shock load applications such as reversing operations, please refer back to us.

PERMISSIBLE OVERHUNG LOADS (kg)

Normally the geared motors are directly coupled to driven equipment. So no additional radial load is applicable on the output shaft. But in
case a pulley or chain drive is mounted on the output shaft, overhung load is imposed on the shaft. This load is calculated as under

a = Belt factor
3.0 for flat belt, 2.0 for V belt, 1.2 for sprocket
a x 973 x N N = Power output in kW
P= +W n = Output speed in rpm
n x (D/2)
D = Pulley diameter in meters
W = Weight of the pulley (kg)
TYPE DESIGNATION

Column only for coupled with motor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

M H F 0 3 2 0 1 0 T 0 9 6 4 4 5

Ratio Motor Type Core

005 - 5:1 T - Std TEFC Length
010 - 10:1 F - Flp TEFC Number
015 - 15:1 B - Brake 0
Size Ø 020 - 20:1 C - Crane duty 1 S
03 - 25 025 - 25:1 2
04 - 30 030 - 30:1 3
06 - 35 035 - 35:1 4 M
07 - 40 040 - 40:1 5
08 - 50 050 - 50:1 6
09 - 60 060 - 60:1 Motor size 7
L
10 - 70 070 - 70:1 05 - 56 8
13 - 90 090 - 90:1 06 - 63 9
120 - 120:1 07 - 71
08 - 80 Poles
Stage 09 - 90 2 - 2P
1 - 1 Stage 10 - 100 4 - 4P
2 - 2 Stage 12 - 112 6 - 6P
3 - 3 Stage 13 - 132 8 - 8P
16 - 160 1 - 4/2P
18 - 180 3 - 8/4P
Input Type 20 - 200 5 - 6/4P
F - Flange IEC B5 22 - 225 7 - 8/6P
B - Flange IEC B14 25 - 250
D - Solid shaft Voltage
M - Coupled with motor 2 - 220V
3 - 380V
Mounting 4 - 415V
H - Foot 5 - 440V
W - Flange (Small)
V - Flange (Big) Freq.
S - Shaft mounted 5 - 50Hz
6 - 60Hz
Gear Type
M - Helical-Inline
H - Helical-Inline
K - Heli-Bevel
F - Parallel Shaft-Hollow
A - Parallel Shaft-Hollow
W - Worm
S - Heli-Worm
P - Plenetory
T - Large helical
B - Large Heli-Bevel
SELECTION CHART FOR GEARED MOTOR

Output Output Output Output

Nominal Service Nominal Service
Speed Torque Model Speed Torque Model
Ratio Factor Ratio Factor
(rpm) (Nm) (rpm) (Nm)

0.18 kW / 0.25 HP 0.37 kW / 0.50 HP

11 143 120 0.9 M__033120_063___ 39 84 35 2.4 M__033035_073___
11 143 120 1.9 M__043120_063___ 46 72 30 2.6 M__033030_073___
15 107 90 1.9 M__033090_063___ 55 60 25 3.0 M__033025_073___
19 83 70 2.3 M__033070_063___ 69 48 20 3.2 M__032020_073___
23 71 60 2.7 M__033063_063___ 92 36 15 4.3 M__032015_073___
27 59 50 3.5 M__033050_063___ 138 24 10 5.1 M__032010_073___
34 48 40 4.1 M__033040_063___ 276 12 5 6.6 M__032005_073___
39 42 35 4.9 M__033035_063___
45 36 30 5.3 M__033030_063___
0.55 kW / 0.75 HP
54 30 25 6.0 M__033025_063___ 12 420 120 1.2 M__073120_080___
68 24 20 6.4 M__032020_063___ 16 315 90 1.6 M__073090_080___
91 18 15 8.6 M__032015_063___ 20 245 70 1.5 M__063070_080___
136 12 10 10.2 M__032010_063___ 24 210 60 1.4 M__043060_080___
272 6 5 13.4 M__032005_063___ 24 210 60 2.3 M__063060_080___
28 175 50 1.3 M__043050_080___
0.25 kW / 0.33 HP 28 175 50 2.8 M__063050_080___
11 197 120 1.4 M__043120_070___ 35 140 40 1.4 M__033040_080___
11 197 120 1.7 M__063120_070___ 35 140 40 2.3 M__043040_080___
15 147 90 1.4 M__033090_070___ 40 123 35 1.7 M__033035_080___
15 147 90 1.7 M__043090_070___ 40 123 35 2.5 M__043035_080___
20 115 70 1.7 M__033070_070___ 47 105 30 1.8 M__033030_080___
20 115 70 2.3 M__043070_070___ 56 88 25 2.1 M__033025_080___
23 98 60 2.0 M__033060_070___ 71 70 20 3.3 M__033020_080___
27 82 50 2.5 M__033050_070___ 94 53 15 2.9 M__032015_080___
34 66 40 3.0 M__033040_070___ 141 35 10 3.5 M__032010_080___
39 57 35 3.6 M__033035_070___ 282 18 5 4.5 M__032005_080___
46 49 30 3.9 M__033030_070___
0.75 kW / 1.0 HP
55 41 25 4.4 M__033025_070___
69 33 20 4.8 M__032020_070___ 12 571 120 0.9 M__073120_083___
91 25 15 6.3 M__032015_070___ 16 428 90 1.2 M__073090_083___
137 16 10 7.4 M__032010_070___ 20 337 70 1.1 M__063070_083___
274 8 5 9.7 M__032005_070___ 20 333 70 1.6 M__073070_083___
24 285 60 1.0 M__043060_083___
0.37 kW / 0.50 HP
24 285 60 1.7 M__063060_083___
12 289 120 0.9 M__043120_073___ 28 238 50 1.0 M__043050_083___
12 289 120 1.1 M__063120_073___ 28 238 50 2.0 M__063050_083___
15 217 90 1.0 M__033090_073___ 35 190 40 1.0 M__033040_083___
15 217 90 1.1 M__043090_073___ 35 190 40 1.7 M__043040_083___
15 217 90 1.8 M__063090_073___ 35 190 40 2.4 M__063040_083___
20 168 70 1.2 M__033070_073___ 40 167 35 1.2 M__033035_083___
20 168 70 1.5 M__043070_073___ 40 167 35 1.8 M__043035_083___
20 168 70 2.2 M__063070_073___ 47 143 30 1.3 M__033030_083___
23 144 60 1.3 M__033060_073___ 47 143 30 2.0 M__043030_083___
23 144 60 2.1 M__043060_073___ 57 119 25 1.5 M__033025_083___
28 120 50 1.7 M__033050_073___ 57 119 25 2.4 M__043025_083___
28 120 50 1.9 M__043050_073___ 71 95 20 2.3 M__033020_083___
35 96 40 2.0 M__033040_073___ 94 71 15 2.2 M__032015_083___
SELECTION CHART FOR GEARED MOTOR

Output Output Output Output

Nominal Service Nominal Service
Speed Torque Model Speed Torque Model
Ratio Factor Ratio Factor
(rpm) (Nm) (rpm) (Nm)

0.75 kW / 1.0 HP 2.2 kW / 3.0 HP

142 48 10 2.5 M__032010_083___ 29 691 50 1.7 M__083050_106___
283 24 5 3.3 M__032005_083___ 36 552 40 1.1 M__073040_106___
36 552 40 2.0 M__083040_106___
1.1 kW / 1.5 HP 41 483 35 1.1 M__073035_106___
12 837 120 1.9 M__083120_090___ 48 414 30 1.2 M__063030_106___
16 628 90 2.3 M__083090_090___ 57 345 25 1.4 M__063025_106___
20 494 70 3.3 M__083070_090___ 72 276 20 1.2 M__043020_106___
24 419 60 1.4 M__073060_090___ 72 276 20 1.8 M__063020_106___
28 349 50 1.8 M__073050_090___ 95 207 15 1.0 M__042015_106___
35 279 40 1.7 M__063040_090___ 95 207 15 1.5 M__062015_106___
40 244 35 1.8 M__063035_090___ 143 138 10 1.7 M__042010_106___
47 209 30 1.4 M__043030_090___ 286 69 5 2.7 M__042005_106___
47 209 30 2.3 M__063030_090___
57 174 25 1.6 M__043025_090___
3.7 kW / 5.0 HP
71 140 20 1.6 M__033020_090___ 12 2768 120 0.9 M__093120_123___
71 140 20 2.4 M__043020_090___ 16 2076 90 1.0 M__093090_123___
94 105 15 1.5 M__032015_090___ 21 1615 70 1.0 M__083070_123___
94 105 15 1.9 M__042015_090___ 21 1615 70 1.5 M__093070_123___
142 70 10 1.7 M__032010_090___ 24 1384 60 1.1 M__083060_123___
283 35 5 2.3 M__032005_090___ 24 1384 60 1.5 M__093060_123___
29 1153 50 1.0 M__083050_123___
1.5 kW / 2.0 HP
29 1153 50 2.1 M__093050_123___
12 1138 120 1.4 M__083120_096___ 36 923 40 1.2 M__083040_123___
16 853 90 1.7 M__083090_096___ 41 807 35 1.6 M__083035_123___
20 673 70 2.4 M__083070_096___ 48 692 30 1.7 M__083030_123___
24 569 60 1.0 M__073060_096___ 58 577 25 1.1 M__073025_123___
28 474 50 1.4 M__073050_096___ 58 577 25 1.9 M__083025_123___
36 379 40 1.2 M__063040_096___ 72 461 20 1.1 M__063020_123___
41 332 35 1.4 M__063035_096___ 96 346 15 1.3 M__063015_123___
47 284 30 1.0 M__043030_096___ 96 346 15 2.5 M__082015_123___
47 284 30 1.7 M__063030_096___ 144 231 10 1.0 M__042010_123___
57 237 25 1.2 M__043025_096___ 144 231 10 1.4 M__062010_123___
71 190 20 1.1 M__033020_096___ 288 115 5 1.6 M__042005_123___
71 190 20 1.7 M__043020_096___ 288 115 5 1.8 M__062005_123___
95 142 15 1.1 M__032015_096___
5.5 kW / 7.5 HP
95 142 15 1.4 M__042015_096___
95 142 15 2.2 M__062015_096___ 12 4086 120 1.3 M__103120_130___
142 95 10 1.3 M__032010_096___ 16 3065 90 1.6 M__103090_130___
284 47 5 1.7 M__032005_096___ 21 2384 70 1.0 M__093070_130___
21 2384 70 1.7 M__103070_130___
2.2 kW / 3.0 HP
24 2043 60 1.0 M__093060_130___
12 1657 120 1.0 M__083120_106___ 24 2043 60 2.2 M__103060_130___
12 1657 120 1.6 M__093120_106___ 29 1703 50 1.4 M__093050_130___
16 1243 90 1.2 M__083090_106___ 29 1703 50 2.8 M__103050_130___
16 1243 90 1.6 M__093090_106___ 36 1362 40 1.9 M__093040_130___
20 967 70 1.7 M__083070_106___ 41 1192 35 1.1 M__083035_130___
24 829 60 1.9 M__083060_106___ 41 1192 35 2.1 M__093035_130___
SELECTION CHART FOR GEARED MOTOR

Output Output Output Output

Nominal Service Nominal Service
Speed Torque Model Speed Torque Model
Ratio Factor Ratio Factor
(rpm) (Nm) (rpm) (Nm)

5.5 kW / 7.5 HP 9.3 kW / 12.5 HP

48 1022 30 1.2 M__083030_130___ 146 574 10 1.7 M__082010_163___
48 1022 30 2.8 M__093030_130___ 146 574 10 2.7 M__092010_163___
58 851 25 1.3 M__083025_130___ 291 287 5 1.9 M__082005_163___
58 851 25 3.1 M__093025_130___
73 681 20 1.9 M__083020_130___
11.0 kW / 15.0 HP
97 511 15 1.0 M__073015_130___ 12 8144 120 1.0 M__133120_164___
97 511 15 1.7 M__082015_130___ 16 6108 90 1.1 M__133090_164___
97 511 15 2.1 M__092015_130___ 21 4751 70 1.3 M__133070_164___
145 341 10 1.2 M__072010_130___ 24 4072 60 1.1 M__103060_164___
145 341 10 2.9 M__082010_130___ 24 4072 60 1.4 M__133060_164___
290 170 5 1.2 M__072005_130___ 29 3393 50 1.4 M__103050_164___
290 170 5 3.3 M__082005_130___ 29 3393 50 2.1 M__133050_164___
36 2715 40 1.0 M__093040_164___
7.5 kW / 10.0 HP 36 2715 40 1.7 M__103040_164___
12 5572 120 1.0 M__103120_133___ 36 2715 40 2.9 M__133040_164___
16 4179 90 1.2 M__103090_133___ 42 2375 35 1.1 M__093035_164___
21 3250 70 1.2 M__103070_133___ 42 2375 35 1.8 M__103035_164___
24 2786 60 1.6 M__103060_133___ 42 2375 35 2.9 M__133035_164___
29 2322 50 1.1 M__093050_133___ 49 2036 30 1.4 M__093030_164___
29 2322 50 2.1 M__103050_133___ 49 2036 30 2.0 M__103030_164___
36 1857 40 1.4 M__093040_133___ 58 1697 25 1.5 M__093025_164___
41 1625 35 1.6 M__093035_133___ 58 1697 25 2.3 M__103025_164___
48 1393 30 2.0 M__093030_133___ 73 1357 20 2.2 M__093020_164___
58 1161 25 2.2 M__093025_133___ 97 1018 15 2.4 M__093015_164___
73 929 20 1.4 M__083020_133___ 146 679 10 1.5 M__082010_164___
97 696 15 1.2 M__082015_133___ 146 679 10 2.3 M__092010_164___
97 696 15 1.5 M__092015_133___ 291 339 5 1.6 M__082005_164___
145 464 10 2.2 M__082010_133___ 291 339 5 2.7 M__092005_164___
290 232 5 2.4 M__082005_133___
15.0 kW / 20.0 HP
9.3 kW / 12.5 HP
21 6478 70 1.0 M__133070_166___
12 6885 120 1.2 M__133120_163___ 24 5553 60 1.1 M__133060_166___
16 5164 90 1.3 M__163090_163___ 29 4627 50 1.0 M__103050_166___
21 4017 70 1.6 M__133070_163___ 29 4627 50 1.6 M__133050_166___
24 3443 60 1.3 M__103060_163___ 36 3702 40 1.2 M__103040_166___
24 3443 60 1.7 M__133060_163___ 36 3702 40 2.2 M__133040_166___
29 2869 50 1.7 M__103050_163___ 42 3239 35 1.3 M__103035_166___
29 2869 50 2.5 M__163050_163___ 42 3239 35 2.1 M__133035_166___
36 2295 40 1.1 M__093040_163___ 49 2776 30 1.0 M__093030_166___
36 2295 40 2.0 M__103040_163___ 49 2776 30 1.5 M__103030_166___
42 2008 35 1.3 M__093035_163___ 58 2314 25 1.1 M__093025_166___
42 2008 35 2.1 M__103035_163___ 58 2314 25 1.7 M__103025_166___
49 1721 30 1.7 M__093030_163___ 73 1851 20 1.6 M__093020_166___
49 1721 30 2.4 M__103030_163___ 97 1388 15 1.7 M__093015_166___
58 1434 25 1.8 M__093025_163___ 97 1388 15 1.6 M__102015_166___
73 1148 20 2.6 M__093020_163___ 146 925 10 1.7 M__092010_166___
97 861 15 2.8 M__093015_163___ 291 463 5 2.0 M__092005_166___
SELECTION CHART FOR GEARED MOTOR

Output Output Output Output

Nominal Service Nominal Service
Speed Torque Model Speed Torque Model
Ratio Factor Ratio Factor
(rpm) (Nm) (rpm) (Nm)

18.5 kW / 25.0 HP 30.0 kW / 40.0 HP

29 5687 50 1.3 M__133050_183___ 98 2757 15 1.5 M__132015_206___
37 4550 40 1.0 M__103040_183___ 147 1838 10 1.7 M__102010_206___
37 4550 40 1.8 M__133040_183___ 147 1838 10 2.4 M__132010_206___
42 3981 35 1.0 M__103035_183___ 293 919 5 1.5 M__102005_206___
42 3981 35 1.7 M__133035_183___ 293 919 5 2.4 M__132005_206___
49 3412 30 1.2 M__103030_183___
49 3412 30 2.3 M__133030_183___
37.0 kW / 50.0 HP
58 2844 25 1.4 M__103025_183___ 49 6779 30 1.1 M__133030_220___
58 2844 25 2.6 M__133025_183___ 59 5649 25 1.3 M__133025_220___
73 2275 20 1.3 M__093020_183___ 74 4519 20 1.6 M__133020_220___
73 2275 20 1.8 M__103020_183___ 98 3389 15 1.8 M__133015_220___
73 2275 20 3.2 M__133020_183___ 147 2260 10 1.4 M__102010_220___
97 1706 15 1.4 M__093015_183___ 147 2260 10 1.9 M__132010_220___
97 1706 15 1.5 M__103015_183___ 294 1130 5 1.2 M__102005_220___
97 1706 15 2.5 M__132015_183___ 294 1130 5 2.0 M__132005_220___
146 1137 10 1.4 M__092010_183___
146 1137 10 2.7 M__102010_183___
45.0 kW / 60.0 HP
292 569 5 1.6 M__092005_183___ 59 6847 25 1.1 M__133025_223___
292 569 5 2.4 M__102005_183___ 74 5477 20 1.3 M__133020_223___
98 4108 15 1.5 M__133015_223___
22.0 kW / 30.0 HP
148 2739 10 1.1 M__102010_223___
29 6763 50 1.1 M__133050_186___ 148 2739 10 1.6 M__132010_223___
37 5411 40 1.5 M__133040_186___ 295 1369 5 1.0 M__102005_223___
42 4734 35 1.5 M__133035_186___ 295 1369 5 1.6 M__132005_223___
49 4058 30 1.0 M__103030_186___
55.0 kW / 75.0 HP
49 4058 30 1.9 M__133030_186___
58 3382 25 1.2 M__103025_186___ 74 6672 20 1.1 M__133020_253___
58 3382 25 2.2 M__133025_186___ 99 5004 15 1.2 M__133015_253___
73 2705 20 1.1 M__093020_186___ 148 3336 10 1.3 M__132010_253___
73 2705 20 1.5 M__103020_186___ 296 1668 5 1.3 M__132005_253___
73 2705 20 2.7 M__133020_186___ Actual output RPM will depend on the exact ratio. For exact ratio, please
97 2029 15 1.2 M__093015_186___ refer page no. 9 to 12.
97 2029 15 1.3 M__103015_186___
97 2029 15 2.1 M__132015_186___
146 1353 10 1.2 M__092010_186___
146 1353 10 2.3 M__102010_186___
292 676 5 1.4 M__092005_186___
292 676 5 2.0 M__102005_186___

30.0 kW / 40.0 HP
37 7353 40 1.1 M__133040_206___
42 6434 35 1.1 M__133035_206___
49 5515 30 1.4 M__133030_206___
59 4596 25 1.6 M__133025_206___
73 3677 20 1.1 M__103020_206___
73 3677 20 2.0 M__133020_206___
98 2757 15 0.9 M__103015_206___
SELECTION CHART FOR GEAR UNITS

SIZE 033
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 0.25 0.33 0.50 0.75 1.0 1.5 2.0
(kg) (mm)
(rpm) (kgm)

120 119.93 0.25 12 13.8 450 1.0

90 91.47 0.50 16 21.0 450 2.0 1.5 1.0
70 69.57 0.62 21 19.8 439 2.5 1.9 1.2 16
60 59.94 0.71 24 19.6 413 2.8 2.2 1.4
50 49.28 0.93 29 21.1 383 3.7 2.8 1.9
3
40 39.27 1.1 37 19.9 352 4.4 3.3 2.2 1.5 1.1
35 32.51 1.4 45 20.9 327 5.6 4.2 2.8 1.9 1.4
30 30.18 1.4 48 19.4 321 5.6 4.2 2.8 1.9 1.4 19
25 24.81 1.6 58 18.3 296 6.4 4.8 3.2 2.1 1.6
20 20.99 2.3 69 22.2 224 9.2 7.0 4.6 3.1 2.3 1.5 1.2
SIZE 032
20 19.95 1.6 73 15.1 286 6.4 4.8 3.2 16
15 15.75 2.1 92 15.7 255 8.4 6.4 4.2 2.8 2.1 1.4 1.1
2
10 10.42 2.5 139 12.4 224 10.0 7.6 5.0 3.3 2.5 1.7 1.3 19
5 4.88 3.5 297 8.1 179 14.0 10.6 7.0 4.7 3.5 2.3 1.8

SIZE 043
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 0.25 0.33 0.50 0.75 1.0 1.5 2.0 3.0 5.0
(kg) (mm)
(rpm) (kgm)

120 120.20 0.5 12 27.6 459 2.0 1.5 1.0

90 91.24 0.6 16 25.2 459 2.4 1.8 1.2 16
70 72.29 0.8 20 26.6 439 3.2 2.4 1.6
60 60.16 1.1 24 30.4 413 4.4 3.3 2.2 1.5 1.1
50 49.45 1.0 29 22.7 383 4.0 3.0 2.0 1.3 1.0
3
40 39.26 1.8 37 32.5 352 7.2 5.5 3.6 2.4 1.8
35 35.46 1.9 41 31.0 327 7.6 5.8 3.8 2.5 1.9 19
30 30.44 2.1 48 29.4 321 8.4 6.4 4.2 2.8 2.1 1.4 1.1
25 25.38 2.5 57 29.2 301 10.0 7.6 5.0 3.3 2.5 1.7 1.3
20 22.30 3.3 65 33.9 270 13.2 10.0 6.6 4.4 3.3 2.2 1.7 1.1
SIZE 042
20 20.36 1.8 71 17.4 286 7.2 5.5 3.6 16
15 14.27 3.0 102 20.3 240 12.0 9.1 6.0 4.0 3.0 2.0 1.5 1.0 19
2
10 9.96 5.0 146 23.6 230 20.0 15.2 10.0 6.7 5.0 3.3 2.5 1.7 1.0
24
5 5.66 7.0 256 18.8 179 28.0 21.2 14.0 9.3 7.0 4.7 3.5 2.3 1.4
SELECTION CHART FOR GEAR UNITS

SIZE 063
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 0.25 0.33 0.50 0.75 1.0 1.5 2.0 3.0 5.0
(kg) (mm)
(rpm) (kgm)

120 123.20 0.56 12 31.8 668 2.2 1.7 1.1

90 84.70 1.0 17 39.0 668 4.0 3.0 2.0 1.3
70 68.44 1.2 21 37.8 628 4.8 3.6 2.4 1.6 1.2
60 59.29 1.8 24 49.2 571 7.2 5.5 3.6 2.4 1.8
50 50.82 2.1 29 49.2 541 8.4 6.4 4.2 2.8 2.1 1.4 1.1 19
40 41.29 2.5 35 47.6 500 3 10.0 7.6 5.0 3.3 2.5 1.7 1.3
35 34.25 2.9 42 45.8 469 11.6 8.8 5.8 3.9 2.9 1.9 1.5
30 30.17 3.5 48 48.6 439 14.0 10.6 7.0 4.7 3.5 2.3 1.8 1.2
25 25.51 4.3 57 50.5 362 17.2 13.0 8.6 5.7 4.3 2.9 2.2 1.4
20 19.71 5.5 74 49.9 296 22.0 16.7 11.0 7.3 5.5 3.7 2.8 1.8 1.1
24
15 16.34 6.2 89 46.7 281 24.8 18.8 12.4 8.3 6.2 4.1 3.1 2.1 1.2
SIZE 062
20 18.79 3.2 77 28.5 403 12.8 9.7 6.4 4.3 3.2 2.1 1.6
19
15 15.07 4.5 96 32.1 357 18.0 13.6 9.0 6.0 4.5 3.0 2.3 1.5
2
10 10.05 6.4 144 30.5 311 25.6 19.4 12.8 8.5 6.4 4.3 3.2 2.1 1.3
24
5 5.23 8.3 277 20.6 250 33.2 25.2 16.6 11.1 8.3 5.5 4.2 2.8 1.7

SIZE 073
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 1.0 1.5 2.0 3.0 5.0 7.5
(kg) (mm)
(rpm) (kgm)

120 116.13 1.0 12 53.4 837 1.0

90 92.40 1.2 16 51.0 786 1.2
70 70.75 1.7 20 55.3 694 1.7
60 63.05 2.0 23 58.0 663 2.0 1.3 1.0
19
50 50.25 2.8 29 64.7 592 2.8 1.9 1.4
40 40.81 3.2 36 60.1 541 3 3.2 2.1 1.6 1.1
35 33.98 3.5 43 54.7 520 3.5 2.3 1.8 1.2
30 31.94 3.8 45 55.8 500 3.8 2.5 1.9 1.3
25 25.97 5.2 56 62.1 444 5.2 3.5 2.6 1.7 1.0
24
20 20.33 6.0 71 56.1 413 6.0 4.0 3.0 2.0 1.2
15 14.95 7.5 97 51.6 367 7.5 5.0 3.8 2.5 1.5 1.0 38
SIZE 072
20 21.27 4.5 68 45.4 449 4.5 3.0 2.3 1.5 19
15 14.83 6.1 98 42.9 398 6.1 4.1 3.1 2.0 1.2 24
2
10 9.96 8.7 146 41.1 342 8.7 5.8 4.4 2.9 1.7 1.2
38
5 4.78 9.5 304 21.5 276 9.5 6.3 4.8 3.2 1.9 1.3
SELECTION CHART FOR GEAR UNITS

SIZE 083
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 2.0 3.0 5.0 7.5 10.0 12.5 15.0
(kg) (mm)
(rpm) (kgm)

120 117.17 3.0 12 161.7 1939 1.5 1.0

19
90 92.13 3.5 16 148.3 1939 1.8 1.2
70 72.13 5.0 20 165.9 1832 2.5 1.7 1.0
60 61.99 5.5 23 156.8 1740 2.8 1.8 1.1
28
50 50.35 5.3 29 122.7 1694 2.7 1.8 1.1
3
40 38.78 6.4 37 114.2 1500 3.2 2.1 1.3
35 34.47 8.5 42 134.8 1429 4.3 2.8 1.7 1.1
30 29.90 8.8 49 121.0 1352 4.4 2.9 1.8 1.2
38
25 27.50 8.7 53 110.0 1342 4.4 2.9 1.7 1.2
20 21.56 13.3 67 131.9 1173 6.7 4.4 2.7 1.8 1.3
SIZE 082
20 19.83 7.0 73 65.8 1265 3.5 2.3 1.4 28
15 15.29 12.1 95 87.7 1122 6.1 4.0 2.4 1.6 1.2 38
2
10 10.37 20.7 140 101.8 954 10.4 6.9 4.1 2.8 2.1 1.7 1.4
42
5 5.02 23.8 289 56.7 760 11.9 7.9 4.8 3.2 2.4 1.9 1.6

SIZE 093
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 3.0 5.0 7.5 10.0 12.5 15.0 20.0 25.0 30.0 (mm)
(kg)
(rpm) (kgm)

120 115.43 5.0 13 265.5 2296 1.7 1.0

28
90 89.28 5.0 16 205.3 2296 1.7 1.0
70 69.95 7.5 21 241.3 2056 2.5 1.5 1.0
60 60.82 7.5 24 209.8 1985 2.5 1.5 1.0 38
50 48.03 11.3 30 249.7 1724 3.8 2.3 1.5 1.1
40 38.36 15.0 38 264.7 1556 3 5.0 3.0 2.0 1.5 1.2 1.0
35 35.72 15.8 41 259.6 1515 5.3 3.2 2.1 1.6 1.3 1.1
42
30 28.33 22.3 51 290.6 1301 7.4 4.5 3.0 2.2 1.8 1.5 1.1
25 24.63 23.5 59 266.3 1260 7.8 4.7 3.1 2.4 1.9 1.6 1.2
20 19.69 33.0 74 298.9 1092 11.0 6.6 4.4 3.3 2.6 2.2 1.7 1.3 1.1
48
15 15.32 35.0 95 246.7 1046 11.7 7.0 4.7 3.5 2.8 2.3 1.8 1.4 1.2
SIZE 092
20 20.92 7.1 69 70.4 1480 2.4 1.4 28
15 15.26 15.0 95 108.5 1270 5.0 3.0 2.0 1.5 1.2 38
2
10 9.74 34.5 149 159.4 1010 11.5 6.9 4.6 3.5 2.8 2.3 1.7 1.4 1.2
48
5 5.42 37.0 267 95.1 857 12.3 7.4 4.9 3.7 3.0 2.5 1.9 1.5 1.2
SELECTION CHART FOR GEAR UNITS

SIZE 103
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 7.5 10.0 15.0 20.0 25.0 30.0 40.0 50.0 60.0 (mm)
(kg)
(rpm) (kgm)

120 115.50 10.5 13 557.9 2699 1.4 1.1

90 86.50 12.5 17 497.3 2444 1.7 1.3 38
70 68.27 13.0 21 408.2 2306 1.7 1.3
60 62.90 16.0 23 462.9 2179 2.1 1.6 1.1
42
50 53.00 20.0 27 487.6 2010 2.7 2.0 1.3 1.0
40 39.52 25.5 37 463.5 1796 3 3.4 2.6 1.7 1.3 1.0
35 34.23 27.0 42 425.2 1719 3.6 2.7 1.8 1.4 1.1
30 29.23 31.0 50 416.8 1592 4.1 3.1 2.1 1.6 1.2 1.0
48
25 25.52 34.5 57 405.0 1531 4.6 3.5 2.3 1.7 1.4 1.2
20 21.79 42.0 67 421.0 1388 5.6 4.2 2.8 2.1 1.7 1.4 1.1
15 13.09 44.0 111 264.9 1281 5.9 4.4 2.9 2.2 1.8 1.5 1.1
SIZE 102
20 21.77 24.0 67 247.7 1638 3.2 2.4 38
15 14.38 34.0 101 231.8 1398 4.5 3.4 2.3 1.7 42
2
10 10.44 63.0 139 312.0 1173 8.4 6.3 4.2 3.2 2.5 2.1 1.6 1.3 1.1
48
5 4.50 66.0 322 140.7 959 8.8 6.6 4.4 3.3 2.6 2.2 1.7 1.3 1.1

SIZE 133
1450 Input rpm Available Input HP with Service Factor
Overhung Input
Nominal Actual Input Output Output Load Stage Shaft
Ratio Ratio HP Speed Torque 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0
(kg) (mm)
(rpm) (kgm)

120 117.25 15.0 12 809.0 3561 1.0

90 91.63 16.0 16 674.4 3337 1.1 42
70 70.35 20.0 21 647.2 3036 1.3 1.0
60 59.14 25.0 25 598.5 2878 1.7 1.3 1.0
50 50.13 32.0 29 738.0 2520 2.1 1.6 1.3 1.1
48
40 43.25 41.0 34 815.7 2281 3 2.7 2.1 1.6 1.4 1.0
35 35.39 43.0 41 700.0 2199 2.9 2.2 1.7 1.4 1.1
30 32.81 52.5 44 792.4 2031 3.5 2.6 2.1 1.8 1.3 1.1
25 24.24 68.0 60 758.2 1689 4.5 3.4 2.7 2.3 1.7 1.4 1.1
55
20 20.68 77.0 70 732.4 1587 5.1 3.9 3.1 2.6 1.9 1.5 1.3 1.0
15 14.60 91.0 99 611.0 1459 6.1 4.6 3.6 3.0 2.3 1.8 1.5 1.2
SIZE 132
20 21.56 28.0 67 286.3 2184 1.9 1.4 42
15 14.96 61.0 97 432.6 1765 4.1 3.1 2.4 2.0 1.5 1.2 1.0
2
10 10.12 93.0 143 446.3 1485 6.2 4.7 3.7 3.1 2.3 1.9 1.6 1.2 55
5 4.87 98.0 298 226.1 1235 6.5 4.9 3.9 3.3 2.5 2.0 1.6 1.3
MOUNTING DIMENSIONS

MHM

Unit: mm
OUTPUT SHAFT Oil
MHM A E I B F H C G H1 øS
D L U T W (ltr)

032/033 130 160 75 110 145 90 18 178 11 9 25k6 50 8 28 M10x20 0.3

042/043 165 195 90 135 170 115 24 217 13.5 14 30k6 60 8 33 M10x20 0.7
062/063 195 235 100 150 210 130 30 249 17 14 35k6 70 10 38 M12x24 1.1
072/073 205 245 115 170 230 140 30 266 16 18 40k6 80 12 43 M16x32 1.2
082/083 260 310 140 215 290 180 45 335 18 18 50k6 100 14 53.5 M16x32 2.3
092/093 310 365 160 250 340 225 55 416 20 22 60m6 120 18 64 M20x40 4.6
102/103 370 440 185 290 400 250 65 465 23 26 70m6 140 20 74.5 M20x40 6
132/133 410 490 220 340 450 315 70 550 35 33 90m6 170 25 95 M24x48 10

MHM MOTOR DIMENSION MOTOR DIMENSION

HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 HP AC AD
032/033
K 443 470 515 525 550 0.25 124 100
HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 3.0 5.0 0.33/0.50 140 105
042/043
K 471 498 543 553 578 628 651 0.75/1.0 158 122
HP 0.50 0.75 1.0 1.5 2.0 3.0 5.0 1.5/2.0 180 129
062/063
K 536 581 591 616 666 689 3.0 198 152
HP 1.0 1.5 2.0 3.0 5.0 7.5 10.0 5.0 222 165
072/073
K 599 609 634 684 707 784 822 7.5/10.0 262 185
HP 1.5 2.0 3.0 5.0 7.5 10.0 12.5 15.0 12.5/15.0/20.0 311 211
082/083
K 669 694 744 767 844 882 989 25.0/30.0 336 233
HP 3.0 5.0 7.5 10.0 12.5 15.0 20.0 25.0 30.0 40.0 395 276
092/093
K 808 831 904 942 1049 1093 1125 1163 50.0/60.0 435 297
HP 7.5 10.0 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0 485 382
102/103
K 949 987 1094 1138 1170 1208 1287 1363
HP 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0
132/133
K 1179 1223 1254 1292 1371 1447 1559
MOUNTING DIMENSIONS

MWM / MVM

Unit: mm
OUTPUT SHAFT Oil
MWM/MVM A E B øS F C H1
D L U T W (ltr)

MWM 110h7 130 160 9 10

032/033 3.5 11 25k6 50 8 28 M10x20 1.05
MVM 130h7 165 200 11 12
MWM 110h7 130 160 9 10
042/043 3.5 13.5 30k6 60 8 33 M10x20 1.65
MVM 130h7 165 200 11 12
MWM 130h7 165 200 11
062/063 4 15 17 35k6 70 10 38 M12x24 3.6
MVM 180h7 215 250 13.5
MWM 180h7 215 250 14 19
072/073 4 16 40k6 80 12 43 M16x32 4.1
MVM 230h7 265 300 14 21
MWM 230h7 265 300 14 4 19
082/083 18 50k6 100 14 53.5 M16x32 7.7
MVM 250h7 300 350 18 5 21
MWM 250h7 300 350 18 21
092/093 5 20 60m6 120 18 64 M20x40 14
MVM 350h7 400 450 18 25
MWM 250h7 300 350 18 21
102/103 5 23 70m6 140 20 74.5 M20x40 19.2
MVM 350h7 400 450 18 25
MWM 350h7 400 450 18 25
132/133 5 35 90m6 170 25 95 M24x48 32.5
MVM 450h7 500 550 18 28

MWM/MVM MOTOR DIMENSION MOTOR DIMENSION

HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 HP AC AD
032/033
K 443 470 515 525 550 0.25 124 100
HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 3.0 5.0 0.33/0.50 140 105
042/043
K 471 498 543 553 578 628 651 0.75/1.0 158 122
HP 0.5 0.75 1.0 1.5 2.0 3.0 5.0 1.5/2.0 180 129
062/063
K 536 581 591 616 666 689 3.0 198 152
HP 1.0 1.5 2.0 3.0 5.0 7.5 10.0 5.0 222 165
072/073
K 599 609 634 684 707 784 822 7.5/10.0 262 185
HP 1.5 2.0 3.0 5.0 7.5 10.0 12.5 15.0 12.5/15.0/20.0 311 211
082/083
K 669 694 744 767 844 882 989 25.0/30.0 336 233
HP 3.0 5.0 7.5 10.0 12.5 15.0 20.0 25.0 30.0 40.0 395 276
092/093
K 808 831 904 942 1049 1093 1125 1163 50.0/60.0 435 297
HP 7.5 10.0 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0 485 382
102/103
K 949 987 1094 1138 1170 1208 1287 1363
HP 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0
132/133
K 1179 1223 1254 1292 1371 1447 1559
MOUNTING DIMENSIONS

MHF

4nos. - 63-200,
8nos. - 225, 250

Unit: mm
OUTPUT SHAFT Oil
MHF A E I B F H C G H1 øS
D L U T W (ltr)

032/033 130 160 75 110 145 90 18 178 11 9 25k6 50 8 28 M10x20 0.3

042/043 165 195 90 135 170 115 24 217 13.5 14 30k6 60 8 33 M10x20 0.7
062/063 195 235 100 150 210 130 30 249 17 14 35k6 70 10 38 M12x24 1.1
072/073 205 245 115 170 230 140 30 266 16 18 40k6 80 12 43 M16x32 1.2
082/083 260 310 140 215 290 180 45 335 18 18 50k6 100 14 53.5 M16x32 2.3
092/093 310 365 160 250 340 225 55 416 20 22 60m6 120 18 64 M20x40 4.6
102/103 370 440 185 290 400 250 65 465 23 26 70m6 140 20 74.5 M20x40 6
132/133 410 490 220 340 450 315 70 550 35 33 90m6 170 25 95 M24x48 10

MHF MOUNTING FLANGE INPUT BORE MOUNTING FLANGE

HP
HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 d t u N M P J S1
032/033
K 260 278 0.25 11 12.8 4
110 130 160 4 M8
HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 3.0 5.0 0.5 14 16.3 5
042/043
K 288 306 322 1.0 19 21.8 6
130 165 200 5 M10
HP 0.50 0.75 1.0 1.5 2.0 3.0 5.0 2.0 24 27.3 8
062/063
K 326 344 360 3.0
28 31.3 8 180 215 250 5 M12
HP 1.0 1.5 2.0 3.0 5.0 7.5 10.0 5.0
072/073
K 362 378 427 7.5
38 41.3 12 230 265 300 6 M12
HP 1.5 2.0 3.0 5.0 7.5 10.0 12.5 15.0 10.0
082/083
K 422 438 487 523 15.0
42 45.3 12 250 300 350 6 M16
HP 3.0 5.0 7.5 10.0 12.5 15.0 20.0 25.0 30.0 20.0
092/093
K 502 547 583 592 25.0
48 51.8 14
HP 7.5 10.0 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 30.0 300 350 400 6 M16
102/103
K 592 628 637 668 40.0 55 59.3 16
HP 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0 50.0
132/133 60 64.4 18 350 400 450 6 M16
K 713 721 752 769 60.0
75.0 65 69.4 18 450 500 550 6 M16
MOUNTING DIMENSIONS

MWF / MVF

4nos. - 63-200,
8nos. - 225, 250

Unit: mm
OUTPUT SHAFT Oil
MWF/MVF A E B øS F C H1
D L U T W (ltr)

MWF 110h7 130 160 9 10

032/033 3.5 11 25k6 50 8 28 M10x20 1.05
MVF 130h7 165 200 11 12
MWF 110h7 130 160 9 10
042/043 3.5 13.5 30k6 60 8 33 M10x20 1.65
MVF 130h7 165 200 11 12
MWF 130h7 165 200 11
062/063 4 15 17 35k6 70 10 38 M12x24 3.6
MVF 180h7 215 250 13.5
MWF 180h7 215 250 14 19
072/073 4 16 40k6 80 12 43 M16x32 4.1
MVF 230h7 265 300 14 21
MWF 230h7 265 300 14 4 19
082/083 18 50k6 100 14 53.5 M16x32 7.7
MVF 250h7 300 350 18 5 21
MWF 250h7 300 350 18 21
092/093 5 20 60m6 120 18 64 M20x40 14
MVF 350h7 400 450 18 25
MWF 250h7 300 350 18 21
102/103 5 23 70m6 140 20 74.5 M20x40 19.2
MVF 350h7 400 450 18 25
MWF 350h7 400 450 18 25
132/133 5 35 90m6 170 25 95 M24x48 32.5
MVF 450h7 500 550 18 28

MWF/MVF MOUNTING FLANGE INPUT BORE MOUNTING FLANGE

HP
HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 d t u N M P J S1
032/033
K 260 278 0.25 11 12.8 4
110 130 160 4 M8
HP 0.25 0.33 0.50 0.75 1.0 1.5 2.0 3.0 5.0 0.5 14 16.3 5
042/043
K 288 306 322 1.0 19 21.8 6
130 165 200 5 M10
HP 0.50 0.75 1.0 1.5 2.0 3.0 5.0 2.0 24 27.3 8
062/063
K 326 344 360 3.0
28 31.3 8 180 215 250 5 M12
HP 1.0 1.5 2.0 3.0 5.0 7.5 10.0 5.0
072/073
K 362 378 427 7.5
38 41.3 12 230 265 300 6 M12
HP 1.5 2.0 3.0 5.0 7.5 10.0 12.5 15.0 10.0
082/083
K 422 438 487 523 15.0
42 45.3 12 250 300 350 6 M16
HP 3.0 5.0 7.5 10.0 12.5 15.0 20.0 25.0 30.0 20.0
092/093
K 502 547 583 592 25.0
48 51.8 14
HP 7.5 10.0 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 30.0 300 350 400 6 M16
102/103
K 592 628 637 668 40.0 55 59.3 16
HP 12.5 15.0 20.0 25.0 30.0 40.0 50.0 60.0 75.0 50.0
132/133 60 64.4 18 350 400 450 6 M16
K 713 721 752 769 60.0
75.0 65 69.4 18 450 500 550 6 M16
MOUNTING DIMENSIONS

MHD

Unit: mm
OUTPUT SHAFT Oil
MHD A E I B F H C G H1 øS
D L U T W (ltr)

032/033 130 160 75 110 145 90 18 178 11 9 25k6 50 8 28 M10x20 0.3

042/043 165 195 90 135 170 115 24 217 13.5 14 30k6 60 8 33 M10x20 0.7
062/063 195 235 100 150 210 130 30 249 17 14 35k6 70 10 38 M12x24 1.1
072/073 205 245 115 170 230 140 30 266 16 18 40k6 80 12 43 M16x32 1.2
082/083 260 310 140 215 290 180 45 335 18 18 50k6 100 14 53.5 M16x32 2.3
092/093 310 365 160 250 340 225 55 416 20 22 60m6 120 18 64 M20x40 4.6
102/103 370 440 185 290 400 250 65 465 23 26 70m6 140 20 74.5 M20x40 6
132/133 410 490 220 340 450 315 70 550 35 33 90m6 170 25 95 M24x48 10

INPUT SHAFT
MHD INPUT SHAFT
d t u l w
d 16 19 16k6 18 5 40 M5x10
032/033
K 295 298 19k6 21.5 6 40 M6x12
d 16 19 24 24k6 27 8 50 M8x16
042/043
K 323 325 325 28k6 31 8 60 M8x16
d 19 24 38k6 41 10 80 M12x24
062/063
K 389 399 42k6 45 12 110 M16x32
d 19 24 38 48K6 51.5 14 110 M16x32
072/073
K 406 417 480 55k6 59 16 110 M20x40
d 19 28 38 42
082/083
K 466 487 540 613
d 28 38 42 48
092/093
K 551 600 673 678
d 38 42 48
102/103
K 645 718 723
d 42 48 55
132/133
K 803 807 849
WEIGHT (kg)

SIZE
MODEL 032 033 042 043 062 063 072 073 082 083 092 093 102 103 132 133
HP/ DIA

0.25 17 18 24 25 34 34
0.33 19 20 26 27 36 36
0.50 20 21 27 28 37 37
0.75 26 27 32 33 41 42
1.0 27 28 33 34 42 43 49 50
1.5 31 32 37 38 46 47 53 54
2.0 33 34 39 40 48 49 55 56 85 88
3.0 50 51 63 64 65 67 96 99 129 133
5.0 61 74 75 76 78 107 110 140 144
7.5 101 103 131 134 164 168 218 224
MHM
10.0 149 152 182 186 235 241
12.5 179 212 216 265 271
15.0 185 218 222 271 277 362 373
20.0 236 240 289 295 380 391
25.0 267 271 320 326 411 422
30.0 284 288 337 343 428 439
40.0 423 429 513 524
50.0 513 604 615
60.0 547 638 649
75.0 687 698
0.25 19 20 25 26 37 38
0.33 21 22 27 28 39 40
0.50 22 23 28 29 40 41
0.75 28 29 34 35 46 47
1.0 29 30 35 36 47 48 57 58
1.5 33 34 39 40 51 52 61 62
2.0 35 36 41 42 53 54 63 64 94 98
3.0 52 52 66 67 73 75 105 108 150 154
5.0 63 77 78 84 86 116 119 161 165
MWM/ 7.5 109 110 140 143 184 188 233 239
MVM 10.0 147 150 191 195 240 246
12.5 188 232 236 280 286
15.0 194 238 242 286 292 397 407
20.0 256 260 304 310 415 425
25.0 287 291 335 341 446 456
30.0 304 308 352 358 463 473
40.0 438 444 548 558
50.0 528 639 649
60.0 562 673 683
75.0 722 732
0.25/0.33/0.50 11 12 18 19 28 28
0.75/1.0/1.5/2.0 13 14 19 20 28 29 35 36 65 68
3.0/5.0 22 23 35 36 37 39 68 71 101 105
7.5/10.0 44 46 74 77 107 111 161 167
MHF
12.5 ~ 30.0 85 88 118 122 171 177 262 273
40.0 127 131 181 187 271 282
50.0/60.0 188 194 279 290
75.0 297 308
0.25/0.33/0.50 13 14 19 20 31 32
0.75/1.0/1.5/2.0 15 16 21 22 33 34 43 44 74 78
3.0/5.0 24 24 38 39 45 47 77 80 122 126
MWF/ 7.5/10.0 52 53 83 86 127 131 176 182
MVF 12.5 ~ 30.0 94 97 138 142 186 192 297 307
40.0 147 151 196 202 306 316
50.0/60.0 203 209 314 324
75.0 332 342
ø16 10 11 14 18
ø19 11 11 17 18 26 27 34 36 64 68
ø24 17 34 35 36 38
ø28 65 68 98 102
MHD
ø38 39 41 69 72 102 106 157 163
ø42 77 110 114 164 170 254 265
ø48 117 121 175 181 266 277
ø55 273 284
ELECTRICAL PERFORMANCE
4 POLE MOTOR

Frame Output Speed Current Torque Efficiency % Power Factor GD²

STA STT POT
Size KW HP (rpm) (A) (kgm) FL 3/4L 1/2L FL 3/4L 1/2L (kgm²)

63 0.18 0.25 1360 0.57 0.13 60.0 53.0 38.0 0.73 0.58 0.45 3.5 1.9 2.1 0.0010
71 0.25 0.33 1370 0.76 0.18 62.0 61.0 53.0 0.74 0.63 0.47 3.5 1.9 2.1 0.0016
71 0.37 0.50 1380 1.05 0.26 66.0 65.0 58.0 0.74 0.64 0.53 3.5 1.9 2.1 0.0022
80 0.55 0.75 1410 1.45 0.38 73.0 72.0 69.0 0.72 0.62 0.52 4.3 2.0 2.3 0.0038
80 0.75 1.0 1415 1.75 0.52 74.0 73.0 68.0 0.81 0.70 0.55 4.5 2.0 2.3 0.0049
90S 1.1 1.5 1415 2.5 0.76 76.5 76.0 74.0 0.80 0.70 0.55 5.0 2.2 2.5 0.0072
90L 1.5 2.0 1420 3.3 1.03 79.0 79.0 77.0 0.80 0.70 0.55 5.0 2.2 2.5 0.0093
100L 2.2 3.0 1430 4.4 1.50 82.0 82.0 80.0 0.85 0.81 0.63 5.5 2.2 2.5 0.0182
100L 3.0 4.0 1430 6.0 2.04 82.6 82.6 81.0 0.84 0.79 0.69 5.5 2.2 2.5 0.0237
112M 3.7 5.0 1440 7.2 2.50 85.0 85.0 84.0 0.84 0.78 0.70 5.5 2.2 2.5 0.0342
132S 5.5 7.5 1450 10.6 3.69 87.0 87.0 86.0 0.83 0.78 0.63 5.5 2.3 2.5 0.0676
132M 7.5 10.0 1450 14.2 5.04 87.0 87.0 86.0 0.84 0.79 0.69 5.5 2.3 2.5 0.0912
160M 9.3 12.5 1455 17.2 6.23 88.0 88.0 87.0 0.85 0.77 0.66 6.0 2.2 2.5 0.1404
160M 11.0 15.0 1455 20.8 7.36 89.0 89.0 87.0 0.83 0.75 0.66 6.0 2.2 2.5 0.1696
160L 15.0 20.0 1455 27.0 10.04 90.0 90.5 89.0 0.86 0.84 0.75 6.0 2.2 2.5 0.2222
180M 18.5 25.0 1460 34.0 12.34 90.5 90.5 89.5 0.84 0.81 0.74 6.0 2.2 2.5 0.3222
180L 22.0 30.0 1460 39.0 14.68 91.0 91.0 90.0 0.86 0.82 0.76 6.0 2.2 2.5 0.3790
200L 30.0 40.0 1465 52.0 19.95 92.0 92.0 91.0 0.87 0.84 0.77 6.0 2.2 2.5 0.8066
225SX 37.0 50.0 1470 64.0 24.52 92.5 92.5 91.5 0.87 0.85 0.79 6.0 2.2 2.5 1.2224
225MX 45.0 60.0 1475 77.0 29.72 93.0 93.0 92.0 0.87 0.85 0.79 6.0 2.2 2.5 1.4552
250MX 55.0 75.0 1480 92.0 36.20 94.0 94.0 93.0 0.88 0.87 0.82 6.0 2.2 2.5 2.2563

6 POLE MOTOR

Frame Output Speed Current Torque Efficiency % Power Factor GD²

STA STT POT
Size KW HP (rpm) (A) (kgm) FL 3/4L 1/2L FL 3/4L 1/2L (kgm²)

71 0.093 0.125 870 0.45 0.10 52.0 49.0 40.0 0.55 0.44 0.33 3.0 2.0 2.1 0.0024
71 0.12 0.16 880 0.55 0.13 55.0 52.0 41.0 0.55 0.45 0.34 3.0 2.0 2.1 0.0024
71 0.18 0.25 900 0.65 0.19 60.0 55.0 42.0 0.64 0.55 0.38 3.0 2.0 2.1 0.0033
71 0.25 0.33 905 0.85 0.27 64.0 59.0 44.0 0.64 0.55 0.38 3.0 2.0 2.1 0.0033
80 0.37 0.50 915 1.10 0.39 67.0 66.0 63.0 0.70 0.63 0.51 4.0 2.0 2.1 0.0049
80 0.55 0.75 920 1.55 0.58 70.0 69.0 66.0 0.71 0.63 0.51 4.0 2.0 2.1 0.0063
90S 0.75 1.0 925 2.0 0.79 72.0 71.0 66.0 0.72 0.64 0.52 5.0 2.2 2.4 0.0095
90L 1.1 1.5 930 2.9 1.15 75.0 74.0 69.0 0.70 0.58 0.42 5.0 2.2 2.4 0.0122
100L 1.5 2.0 940 3.5 1.55 76.0 75.0 71.0 0.78 0.73 0.60 5.0 2.0 2.3 0.0269
112M 2.2 3.0 945 4.9 2.27 80.0 79.5 75.5 0.78 0.70 0.55 5.0 2.0 2.3 0.0047
132S 3.7 5.0 950 7.5 3.79 82.5 82.5 81.5 0.83 0.73 0.64 5.0 2.0 2.3 0.0826
132M 5.5 7.5 950 11.0 5.64 85.0 85.0 83.5 0.82 0.77 0.67 5.0 2.0 2.3 0.1156
160M 7.5 10.0 960 15.0 7.61 87.0 87.0 84.5 0.80 0.76 0.68 5.5 2.0 2.3 0.2625
160L 9.3 12.5 965 17.5 9.39 88.0 88.0 85.0 0.84 0.81 0.70 5.5 2.0 2.3 0.3440
160L 11.0 15.0 970 20.5 11.05 88.5 88.5 87.5 0.84 0.81 0.70 5.5 2.0 2.3 0.3440
180L 15.0 20.0 970 27.5 15.06 89.5 89.5 88.0 0.85 0.82 0.72 5.5 2.0 2.3 0.5949
200L 18.5 25.0 975 34.0 18.48 90.5 90.5 89.0 0.84 0.82 0.73 5.5 2.0 2.3 0.8605
200L 22.0 30.0 975 40.0 21.98 91.0 91.0 90.5 0.84 0.82 0.73 5.5 2.0 2.3 1.0123
225MX 30.0 40.0 980 54.0 29.82 92.0 92.0 90.5 0.84 0.82 0.74 6.0 2.0 2.3 1.8378
250MX 37.0 50.0 982 66.5 36.70 92.5 92.5 90.5 0.84 0.82 0.74 6.0 2.0 2.3 2.5127
MOUNTING POSITIONS

B3 B5 B6

B7 B8 V1

V3 V5 V6

Note: 1) BP – Breather Plug, OL – Oil Level Indicator, DP – Drain Plug.

2) For mounting arrangement V6, special bearing lubrication arrangement required.

Authorised Dealer:

Admin. Office:
P. O. Box 18701, 32/A, Vidyavilla Comp., Old Nagardas
Road, Andheri (East), Mumbai 400069.
Tel.: 2838 0080, 2838 0081, 2836 0651, 2820 1316.
Fax: 022-28380947. Email: gearsales@hindmotors.com
Website: www.hindmotors.com

This catalogue supersedes all the previous catalogues. Cat.: M02

Design & specifications are subject to change without prior notice. Print: 06/2007