Scribd
Upload
263 views2 pages

Wire Rod EN

This document summarizes the features of hot-rolled wire rod produced by Sidenor S.A., including 5 steel grades, diameter ranges from 5.5 to 16 mm, coil weights of 1,250-1,450 kg, and dimensions/tolerances to DIN 59110. It also provides tables listing the chemical composition ranges for each steel grade and the diameter, weight, and tolerance specifications. Customer requests for other diameters/standards can be met.

Uploaded by

Eltjon Pumi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
263 views2 pages

Wire Rod EN

This document summarizes the features of hot-rolled wire rod produced by Sidenor S.A., including 5 steel grades, diameter ranges from 5.5 to 16 mm, coil weights of 1,250-1,450 kg, and dimensions/tolerances to DIN 59110. It also provides tables listing the chemical composition ranges for each steel grade and the diameter, weight, and tolerance specifications. Customer requests for other diameters/standards can be met.

Uploaded by

Eltjon Pumi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WIRE ROD

FEATURES
TYPE: Hot-rolled wire rod
STEEL GRADES: 1) SAE 1006 according to ASTM A510M
2) SAE 1008 according to ASTM A510M
3) SAE 1010 according to ASTM A510M
4) Electrode quality (USD 7) according to DIN 17145
5) RSt 37-2 according to DIN 17100
FORM - DIAMETER: Coils. Diameters: from º5,5 to º16mm
COIL WEIGHT: Approximately 1.250kg - 1.450kg per coil
DIMENSIONS, WEIGHT, TOLERANCES: According to DIN 59110

Customer requirements for other diameters, as well as other recognised industrial standards, can be met upon
request.

Chemical composition, mechanical properties, dimensions, weight and tolerances can be found overleaf.

Main 57 B, Ethnikis Antistasseos str., GR - 152 31, Halandri, Athens, GREECE


Offices: Tel.: +30-210-6787 754, 6787 111, Fax: +30-210-6787 740, e-mail: info@sidenor.vionet.gr, http://www.sidenor.gr
Plant 12th km, National Road Thessaloniki-Veria, P.O. Box 59, GR-570 08 Ionia, Thessaloniki, GREECE
Tel.: +30-2310-790 126, 790 111, Fax: +30-2310-722 288, e-mail: info@sidenor.vionet.gr, http://www.sidenor.gr
CHEMICAL COMPOSITION OF WIRE ROD STEEL GRADES

STEEL C (%) Mn (%) S (%) P (%) Si (%) Cr (%) Ni (%) Cu (%) TYPICAL
GRADES max max max max max max max USES
Black and galvanized
SAE 1006 0,08 0,30-0,40 0,025 0,020 0,08 0,10 0,10 0,15 wires, small nails

Concrete reinforcing mesh,


SAE 1008 0,09 0,30-0,50 0,030 0,020 0,10 0,15 0,15 0,25 wires, nails, galvanized
fencing mesh

Concrete reinforcing mesh,


SAE 1010 0,10 0,40-0,60 0,040 0,025 0,15 0,20 0,20 0,35 standard wire mesh, nails,
galvanized fencing mesh

Coated welding electrodes


ELECTRODE 0,09 0,40-0,60 0,025 0,020 0,05 0,10 0,10 0,15 (according to
QUALITY DIN 17145 / USD7)

RSt 37-2 0,12 0,40-0,65 0,040 0,025 0,20 0,20 0,20 0,40 Concrete reinforcing mesh

DIAMETERS, WEIGHT AND TOLERANCES OF WIRE ROD

DIAMETER PERMISSIBLE NOMINAL NOMINAL PERMISSIBLE


d DEVIATION cross-section WEIGHT OUT-OF-ROUNDNESS
(mm) (mm) (cm2) (kg/m) (mm)

5,5 0,3 0,238 0,187


6,0 0,3 0,283 0,222 0,48
6,5 0,3 0,332 0,260

7,0 0,4 0,385 0,302


8,0 0,4 0,503 0,395
9,0 0,4 0,636 0,499
10,0 0,4 0,785 0,617 0,64
11,0 0,4 0,950 0,746
12,0 0,4 1,130 0,888
14,0 0,4 1,540 1,210

16,0 0,5 2,010 1,580 0,80


P. 09.05

SIDENOR S.A.
Quality Assurance System is
certified according to ISO 9001
d

You might also like