Robotic Arm with USB PC Interface
User's Manual
Robotic Arm with USB PC Interface
User's Manual
CONTENTS
Product Introduction 01
Warning 01
Caution 01
1.SET UP ( For Windows XP )
1-1.Hardware and system requirements 02
1-2.Install USB Driver and MAIN PROGRAM 02
2.SET UP ( For Windows VISTA )
2-1.Hardware and system requirements 12
2-2.Install USB Driver and MAIN PROGRAM 12
3.SET UP ( For Windows 7 )
3-1.Hardware and system requirements 24
3-2.Install USB Driver and MAIN PROGRAM 24
4.SET UP ( For Windows 8 & 8.1,both work only with 32-bit version )
4-1.Hardware and system requirements 36
4-2.Install USB Driver and MAIN PROGRAM 36
5.HOW TO PLAY
5-1.Start the program 45
5-2.Opening animation 45
5-3.Menu 45
5-4.Basic mode 46
5-5.Program mode 47
5-6.Program mode operation guide 48
6.TROUBLESHOOTING
6-1. For Windows XP / VISTA / 7 / 8 & 8.1 55
6-2. Gearbox movement 55
Product Introduction
This Robotic Arm connects to the Windows personal computer
USB port, suitable for Windows XP / Vista / 7 / 8 & 8.1 (both work
only with 32-bit version ) operation system.
Software includes below functions.
●BASIC mode: By using keyboard or mouse to have real time manual
control of the arm.
●PROGRAM mode: Creating & editing a program, save and load just
like normal computer files.
It creates a fun way of learning and experimenting your Robotic Arm
with computer.
Warning
All rights reserved, reproduction in any manner in whole or in part
without permission of CIC Components Ind., Co., Ltd. is prohibited.
Caution
Keep the interface board away from below places to avoid any injury
of the board:
◆high humidity.
◆direct sunlight.
◆static electricity.
◆reach of small children.
◆liquid or flammable objects
Never disassemble and or reassemble the interface board
or it may cause short circuit,injury or electric shock.
01
1.SET UP ( For Windows XP )
1-1.Hardware and system requirements
OS : Windows XP
CPU : Pentium3, 1.0GHz or higher
Memory : 256MB or higher
Hardware Disk Space : 100MB or more
Display : Super VGA (800x600) or higher
Color monitor with high color 16-bit or higher
1-2.Install USB Driver and MAIN PROGRAM
A.Put the disk into your CD-ROM
B.Connect Robotic Arm and PC with the USB cable.
C.Turn ON the Robotic Arm.
Trun ON
02
D. Install USB Driver and MAIN PROGRAM .
Step1 (If this message does not show on your screen then go to
Troubleshooting 5-1 .)
Step2 (If this window does not show on your screen then go straight to step 3.)
Step3 Choose “ My Computer ”.
03
Step4 Click your CD-ROM icon.
Step5 Choose “ Robotic Arm ” folder.
04
Step6 Click “ Install ” icon .
Step7 Click “Next” to continue.
05
Step8 Click “Continue Anyway” .
Step9 Finish USB DRIVER Install.
Step10 Click “Next” to continue.
06
Step11 Fill in your name or company and click “Next” to continue.
Step12 Click “Next” to continue.
07
Step13 Click “Next” to continue.
Step14 Click “Next” to continue.
08
Step15 Wait......
Step16 Check the box “ I have read and agree to the terms ...... ” .
09
Step17 Click “ INSTALL ” to continue.
Step18 Click “Done” to continue.
10
Step19 Finish setup.
11
2.SET UP ( For Windows VISTA )
2-1.Hardware and system requirements
OS : Windows VISTA
CPU : Pentium3, 1.0GHz or higher
Memory : 256MB or higher
Hardware Disk Space : 100MB or more
Display : Super VGA (800x600) or higher
Color monitor with high color 16-bit or higher
2-2.Install USB Driver and MAIN PROGRAM
A.Put the disk into your CD-ROM
B.Connect Robotic Arm and PC with the USB cable.
C.Turn ON the Robotic Arm.
Trun ON
12
D. Install USB Driver and MAIN PROGRAM.
Step1 Click ” Don’t show this message again for this device “ to continue.
Step2 Click “Cancel” to go next.
13
Step3 Go to “ Computer ” choice.
Step4 Click your CD-ROM icon.
14
Step5 Choose ” Robotic Arm ”.
Step6 Click ” Install ” icon.
15
Step7 Click ” Continue ” to continue.
Step8 Click “ Next ” to continue.
16
Step 9 Click “ Install this driver software anyway ” to continue.
Step10 Click ” Next ” to continue.
17
Step11 Click “ Finish ” to continue.
Step12 Click “ Next ” to continue.
18
Step13 Fill in your name or company and click “Next” to continue.
Step14 Click “ Next ” to continue.
19
Step15 Click “ Next ” to continue.
Step16 Click “ Next ” to continue.
20
Step17 Wait......
Step18 Check the box “ I have read and agree to the terms of ...... ” to continue.
21
Step19 Click “ INSTALL ” to continue.
Step20 Wait.......
22
Step21 Click “ DONE ” to continue.
Step22 Finish setup.
23
3.SET UP ( For Windows 7 )
3-1.Hardware and system requirements
OS : Windows 7
CPU : Pentium3, 1.0GHz or higher
Memory : 256MB or higher
Hardware Disk Space : 100MB or more
Display : Super VGA (800x600) or higher
Color monitor with high color 16-bit or higher
3-2.Install USB Driver and MAIN PROGRAM
A.Put the disk into your CD-ROM
B.Connect Robotic Arm and PC with the USB cable.
C.Turn ON the Robotic Arm.
Trun ON
24
D . Install USB Driver and MAIN PROGRAM .
Step1 Wait......
Step2 Wait......
25
Step3 Go to “ Computer ” choice.
Step4 Click your CD-ROM icon.
26
Step5 Choose “ Robotic Arm ” .
Step6 Click “ Install ” icon.
27
Step7 Click “ YES ” to continue.
Step8 Click “ Next ” to continue.
28
Step9 Click “ Install this driver software anyway ” to continue.
Step10 Wait......
29
Step11 Click “ Finish ” to continue.
Step12 Click “ Next ” to continue.
30
Step13 Fill in your name or company and click “Next” to continue.
Step14 Click “ Next ” to continue.
31
Step15 Click “ Next ” to continue.
Step16 Click “ Next ” to continue.
32
Step17 Wait......
Step18 Check the box “ I have read and agree to the terms of ...... ” to continue.
33
Step19 Click “ INSTALL ” to continue.
Step20 Click “Done” to continue.
34
Step21 Finish setup.
35
4.SET UP ( For Windows 8 & 8.1,both work only with 32-bit version )
4-1.Hardware and system requirements
OS : Windows 8 & 8.1 (both work only with 32-bit version )
CPU : Pentium3, 1.0GHz or higher
Memory : 256MB or higher
Hardware Disk Space : 100MB or more
Display : Super VGA (800x600) or higher
Color monitor with high color 16-bit or higher
4-2.Install USB Driver and MAIN PROGRAM
A.Put the disk into your CD-ROM
B.Connect Robotic Arm and PC with the USB cable.
C.Turn ON the Robotic Arm.
Trun ON
36
D . Install USB Driver and MAIN PROGRAM .
Step1 Choose “ Robotic Arm ” .
Step2 Click “ Install ” icon.
37
Step3 Click “ YES ” to continue.
Step4 Click “ Next ” to continue.
38
Step5 Click “ Install this driver software anyway ” to continue.
Step6 Wait......
39
Step7 Click “ Finish ” to continue.
Step8 Click “ Next ” to continue.
40
Step9 Fill in your name or company and click “Next” to continue.
Step10 Click “ Next ” to continue.
41
Step11 Click “ Next ” to continue.
Step12 Click “ Next ” to continue.
42
Step13 Wait......
Step14 Click “QUIT” to continue.
43
Step15 Finish setup.
44
5.HOW TO PLAY
5-1.Start the program
Click “Robotic Arm”icon on your desktop to start the program.
Robotic Arm
5-2.Opening animation
Click “PLAY” to get into the program.
5-3.MENU
Choose a mode to play.
【MENU】
BASIC mode
PROGRAM mode
Quit
45
5-4.BASIC MODE
Motion area
Label
Back to menu
Control button Status
Control mode for
Keyboard or Mouse
Mouseover effect： Scroll the mouse wheel to operate motor .
46
5-5.PROGRAM MODE
Control button
Data display
Label
File area
Data box
Program display
area
Motion
area
Program tools
Write data area Status
Control mode for
Keyboard or Mouse
Write data area
ENTER : Fix the total operation time in the program display area.
CLEAR : The timer is reset to “0”.
File area
NEW : Create a new file.
OPEN : Open a saved file.
SAVE : Save a created program.
CLOSE : The display goes back to Menu
Program tools
START : The program in the program display area is executed.
STOP : The program under execution is stopped.
REWIND : Reversed for the time specified in the program display area and
Robotic Arm goes back to the original position. 47
DELETE : Selected command in the program display area is deleted.
5-6.PROGRAM MODE OPERATION GUIDE
Step1 Choose “PROGRAM” .
Step2 Begin to program your Robotic Arm. C hoose any of the motor gear in
Motion area. For example, choose “M1”gear and use “Control button”
to change the time you want the Robotic Arm to be moved. The time is
shown at the “Data display”area.
Control
button
2
Data
display
area
48
Data box
Step3 Press “ENTER” to write the data in “Data box”.
Data box
Step4 The data in “Data box”.
49
Step5 Keep to choose another motor gear. Choose “M1” and “M3” gear and
change the data.
4
2
3
1
Step6 Press “ENTER” . The data is written into the “Data box” at the same time.
50
Step7 IF you want to insert a movement before the data in the Data Box .
Click “INSERT” at “ Write data area ”.
Write data area
Step8 Change the time with the motors you want to change.
2
4
3
1
51
Step9 Press “ENTER” . The data is inserted into the “Data box” at the same time.
Step10 To overwrite the data. Click “OVERWRITE” at “ Write data area ”.
52
Write data area
Step11 Change the time with the motors you want to change.
4
2
3
1
Step12 Press “ENTER” . The data is changed at the same time . And the choice
of “OVERWRITE” in“ Write data area ” is changed back to “ADD TO LIST”
automatically.
53
Step13 To see the movement you have been set . Press “START” in
“Program tools” area.
Program
tools
Step14 The movement data will show on screen at the same time while
the Robotic Arm is moving.
54
6.TROUBLESHOOTING
6-1 If there is no "Other devices" shown on your computer.
Please reconnect your Robotic Arm with computer or change
other USB port of your computer or re-install the softwar.
6-2 If the gearbox dose not work smoothly. Please Check motor
wire connection.
55
