Scribd
Upload
529 views9 pages

NavKal UsersGuide

NavKal is an ECM programming software that replaces previous PC-based software. It allows for offline calibration updating, parameter and horsepower changes, programming blank modules, reading and clearing codes, and creating programming verification codes. It requires an EZ-Tech computer with the NavKal software installed, an RP1210B diagnostic interface cable, and dealer information to be entered before use. The document provides step-by-step instructions for connecting to a vehicle, updating calibration and parameters, flashing blank modules, processing requests, performing recoveries, and generating programming verification codes.

Uploaded by

Jose F Rivera Morales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
529 views9 pages

NavKal UsersGuide

NavKal is an ECM programming software that replaces previous PC-based software. It allows for offline calibration updating, parameter and horsepower changes, programming blank modules, reading and clearing codes, and creating programming verification codes. It requires an EZ-Tech computer with the NavKal software installed, an RP1210B diagnostic interface cable, and dealer information to be entered before use. The document provides step-by-step instructions for connecting to a vehicle, updating calibration and parameters, flashing blank modules, processing requests, performing recoveries, and generating programming verification codes.

Uploaded by

Jose F Rivera Morales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Efore luc QUICK REFERENCE Tips for NavKal

NavKal is an Electronic Control Module (ECM) Programming Software that replaces all previous
PC based ECM Programming Software (Nets, AutoUpgrade).

Software Features:
 Offline Calibration updating
 Parameter and Horse Power changes
 Program a Blank Module
 On-screen display of vehicle information, Including ECM software Version and Upgrade
availability
 Read and Clear Engine DTCs
 Create Programming Verification Code (PVC)

Requirements:
 Supported EZ-Tech (Win XP or later)
 RP1210B diagnostic interface cable and latest supported drivers
NavKal OVERVIEW

 Before using NavKal for the first time, you must Enter Dealer
Information
 Select “Update Dealer Information” under File on the Menu bar.
Enter Dealer info and click “Save”

 Before connecting to a vehicle, Select Diagnostic Interface under tools


SECTION 1
Connecting to a Vehicle and Updating Calibration Version

11  If calibration update is available, Existing and New Calibration


will be displayed.
  Battery Voltage must be above range to begin
22 programming, NavKal will display highlighted voltage,
RED = 9.0 – 10.4 Volts YELLOW = 10.5 – 12.4 Volts GREEN =
12.5 Volts or higher. Install the Midtronics SMART Charger
before programming. See SFN 07-11 for details.

3 To begin updating, Select “Update Calibration” and Follow


Screen prompts for key cycles.
SECTION 2
Update/Change Parameter and Horsepower

Note: Case file must be completed before this step


 Select or click on the “Parameter Upgrade” tab. 1
2 Enter Associated Case File Number.

3 Select “Save Request” and follow screen prompts

 Note: See Section 4 “Process Request”

4 Return to Campaigns tab to complete update


SECTION 3
Blank Module Flashing
Note: Case file must be completed before this step
1  Select “Blank Module Flashing” tab.

2 Input Associated Case file and vehicle information, all fields must be
populated
Select “Save Request” 3

4 Select Engine Platform 5 Select module being replaced


SECTION 3 (Continued)
Blank Module Flashing

7 After “Process Request” is complete and Status shows


Downloaded. Return to “Campaigns Tab” to complete update

8 Select “Flash Blank Module”

9 Select VIN
 ”
10 Follow Screen Prompts for Key Cycles
SECTION 4
Process Request
Note: Request type and status are displayed for each vin.

1 Select “Process Request” Tab.

1
Note: Request type and status are displayed for each vin.

2
Select “Process Request” to complete all pending requests.
SECTION 5
Recovery
Note: In the event of programming failure
1 Select Recovery.

2 Select associated VIN


 .
3
 Follow screen prompts for Key Cycles. NavKal screen
prompts will become highlighted.
RED = Cycle Key OFF YELLOW = Cycle Key ON
SECTION 6
Programming Verification Code (PVC)
Note: After programming is complete under Process Request Tab, status will show
pending PVC.

1  Select Process Request to send history & create a Programming


Verification Code (PVC), a PVC will be generated against the associated
(VIN) number

2  Select view PVC to view or print PVC

You might also like