Scribd
Upload
186 views2 pages

Abistir 7120

This technical data sheet provides information on an acrylonitrile-butadiene-styrene (ABS) compound called ABISTIR 7120/V0-UV BIANCO 0154. The ABS compound has a density of 1.25 g/cm3, melt flow index of 50 g/10min, and tensile strength at yield of 37 MPa. It is a flame retardant ABS grade that is UV stabilized and compliant with REACh regulations. The recommended processing temperatures for injection molding are 180-210°C for the zones and 40-60°C for the mold.

Uploaded by

Phung Luc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
186 views2 pages

Abistir 7120

This technical data sheet provides information on an acrylonitrile-butadiene-styrene (ABS) compound called ABISTIR 7120/V0-UV BIANCO 0154. The ABS compound has a density of 1.25 g/cm3, melt flow index of 50 g/10min, and tensile strength at yield of 37 MPa. It is a flame retardant ABS grade that is UV stabilized and compliant with REACh regulations. The recommended processing temperatures for injection molding are 180-210°C for the zones and 40-60°C for the mold.

Uploaded by

Phung Luc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA SHEET

ABISTIR 7120/V0-UV BIANCO 0154


AD340038S

Acrylonitrile-Butadiene-Styrene Compound (ABS)

Description Flame retardant ABS grade, good fluidity, UV stabilized


Color White
Norm compliance Compliant with Regulation (EC) No 1907/2006 (REACh)
Processing technology Injection moulding

Physical properties Typical value (SI) Typical value (EN) Test method
Density 1.25 g/cm³ 1.25 g/cm³ ASTM D792

Mold Shrinkage 0.4 % 0.4 % INTERNAL

Melt Flow Index 220°C/10kg 50 g/10min 50 g/10min ASTM D1238

Water absorption (24 h/23°C) 0.15 % 0.15 % ASTM D570

Mechanical properties Typical value (SI) Typical value (EN) Test method
Tensile strength at yield 37 MPa 5365 psi ASTM D638

Tensile elongation at break 7% 7% ASTM D638

Flexural Modulus 2100 MPa 304500 psi ASTM D790

IZOD impact strength, notched (23 °C) 110 J/m 2.057 ft·lb/inch ASTM D256

Thermal properties Typical value (SI) Typical value (EN) Test method
Vicat B (50°C/h at 50 N) 80 °C 176 F° ASTM D1525

HDT Heat Deflection Temperature A (1,82 MPa) 72 °C 161.6 F° ASTM D648

Flammability Typical value (SI) Typical value (EN) Test method


Flame Rating (1,6 mm) V0 Class V0 Class UL94

Flame Rating (3,2 mm) V0 Class V0 Class UL94

GWIT (Glow Wire Ignition Temperature) 960 °C/mm 960 °C/mm IEC 60695-2-13

Processing conditions Typical value (SI) Typical value (EN)


Drying 2h/80 °C 2h/176 °F

Injection moulding Typical value (SI) Typical value (EN)


Recommended processing temperatures:

1st Zone 180 °C 356 °F

2nd Zone 200 °C 392 °F

3rd Zone 210 °C 410 °F

Mould 40-60 °C 104-140 °F

Last update: 09/12/2014 SO.F.TER. GROUP Page: 1 of 2


TECHNICAL DATA SHEET

Storage
This product should be stored in a covered facility and kept away from moisture and heat.
Disclaimer
The figures reported in this Technical Data Sheet are based on tests and analyses carried out in SO.F.TER. laboratories on
injection-moulded specimens. These figures indicate the typical material properties and are not to be considered a
specification.The user shall always carry out his own tests and analyses in order to verify the suitability of the material for the
specific application.Test carried out at 23°C unless otherwise stated.
For technical or commercial information:
EUROPE
SO.F.TER. SPA, Via Mastro Giorgio 1, 47122 Forlì, Italy, tel +39 0543 790411
info.it@softergroup.com

USA
SO.F.TER. USA, 400 Innovative Way, Lebanon, TN 37090, US, tel +1 844 657 6383 (THINKSOFTER)
info.us@softergroup.com

BRAZIL
SO.F.TER. BRASIL, Av. Edgar Hoffmeister, 275, CEP 93700-000, Campo Bom, RS, Brazil , tel +55 51 2123 2610
info.br@softergroup.com

MEXICO
SO.F.TER MEXICO, Circuito Mexiamora Norte 345, Puerto Interior, Silao, G.to , Mexico 36275, tel +52 472 722 6923
info.mx@softergroup.com

www.softergroup.com

Last update: 09/12/2014 SO.F.TER. GROUP Page: 2 of 2

You might also like