TOTALLY ENCLOSED FAN-COOLED CAST IRON FRAME SERIES

Low Voltage 3-Phase Range

Induction Motors 0.55kW to 500kW

AUSTRALIA & NEW ZEALAND

 General Information Performance
Motors are designed to meet the performance requirements of
MONARCH GX - Three Phase Induction Motors are a range of Design N as per AS60034.1, normal torque for Direct On Line
starting.
high quality, Totally Enclosed Fan Cooled (TEFC), Squirrel Cage
Motors are also suitable for other means of starting, depending
Induction motors, designed, manufactured and tested to the
on load characteristics, please refer to TECO.
latest International and Australian Standards.
Motors can be manufactured to provide special performance
characteristics to suit specific applications as required.
There are two main motor types -
Enclosure Insulation Shaft Finish Standards
Types
Protection Class seals Colour Motors are designed, manufactured and tested in accordance with
MONARCH IP55 F “V” ring TEAL AS1359, AS60034, IEC60072 with Quality Assurance to ISO9001.
Frame sizes are to AS1359.30 CENELEC HD231 allocations.
MONARCH BLUE
IP66 H Gamma However, there are some exceptions where motors are designed
Severe Duty JADE
to meet the AS/BS frame allocations AS1359 as detailed in
“Performance Data” on pages 5-7, and Dimensions on page 8.

Stator and Windings

Electrical Design and Standards High grade insulated cold rolled electro magnetic steel
laminations.
Altitude o
Standard insulation is Class F insulation (155 C) with the Severe
Designed for operation at an altitude up to 1000 metres above o
Duty model utilising full Class H materials (180 C).
sea level (please refer to TECO sales offices for higher altitudes). Windings are designed with a maximum temperature rise of class
B for long motor life and thermal reserve for abnormal conditions.
Windings are random wound double enamelled copper wire,
Ambient impregnated with a solventless resin and all motors are
Motors are designed to operate in ambient conditions of -20°C tropicalised as standard.
to +40°C as standard. Operation in adverse ambient conditions
should be referred to TECO.
Testing
In addition to a full program of tests during manufacture
each motor is subjected to routine tests to AS60034.1 prior to
Direction of Rotation
despatch.
Standard rotation is clockwise when viewed from the drive end
with the terminal markings corresponding to incoming line
markings. Two Speed Motors
Available ex stock are a variety of two-speed motors for variable
Duty Rating torque applications (Centrifugal pump / Fan).
All motors have a maximum continuous duty rating of S1 to Pole configurations
AS60034.1. Other duty ratings are available on request. Poles 2/4 4/8 4/6 6/8
Winding Tapped Tapped Dual Dual

Electric Supply
Mandatory mounting and shaft dimensions are as per this
Stock motors are designed for operation on a 380~415 Volt 3
catalogue, however overall Two Speed dimensions differ for 80 –
phase 50 Hz supply and are also suitable for a 440~480 Volt 3
132 frames. Please refer TECO for outline drawings.
phase 60 Hz supply.
Motors 3 kW and below are 380 - 415 Volt 50 Hz STAR connected
Stock motor connection diagrams
and may also be reconnected to 240 Volt 3 phase 50 Hz DELTA
configuration for use with single phase input Variable Speed
Drives.
Motors 4 kW and larger are 380 – 415 Volt 50 Hz DELTA connected.
Motors can be manufactured for supply systems of up to 1100
Volts, 50 or 60 Hz on a factory made to order basis or by local
rewind / wind.

Motor Types / MEPS (Minimum Efficiency

Performance Standard)
All motors meet or exceed the Minimum Efficiency level
requirements of the Australian / New Zealand Standard Refer to page 7 for performance data, other output powers and
“AS/NZS1359.5-2004” to Table B2 where applicable. performance data is on request.

2 two AUSTRALIA & NEW ZEALAND

Variable Speed Drive (VSD) suitability
Motors are suitable for VSD duty, subject to torque and speed
limitations depending on the load characteristics and correct
installation of motor and drive. EDM protection can be provided
as a modification when requested.

Winding Protection
Single speed motors frame sizes D160 and larger are fitted with
PTC thermistor protection (P140) within the windings, one per
phase, connected in series with the leads terminated in the main
terminal box.
Cooling System
Thermistors are an optional extra on all two speed motors.
• Cooling is Totally Enclosed Fan Cooled (TEFC), with
integrally cast cooling fins on frame and is fitted with
Mechanical Design and Standards external fan (IC411) to AS1359.106.
• The cooling fans are bi-directional and low noise as
Balance standard (larger 2 pole may have uni-directional fans for
All rotors are dynamically balanced with a half key to Class N or low noise).
better, in accordance with AS1359.114.
Finish
Bearing and Lubrication System • All castings are mechanically cleaned and de-greased.
• Cast Iron components are primed internally and externally
DE NDE with an epoxy red oxide primer.
Frame size Poles Greasing
Bearing Bearing
• Two finish coats of matt acrylic resin are applied
Greased providing a high corrosion protected surface.
D80 ~ D160 All Ball Ball
for life
Finish colour TEAL T63 (standard), GLOSS BLUE JADE T24
Grease
D180 ~ D400 2 Ball Ball
relief
(Severe Duty), colours are to AS2700.

4 and Grease
D180 ~ D225 Ball Ball
above relief Hardware
4 and Roller Grease • All hardware is electro zinc plated for better corrosion
D250 ~ D355 Ball
above (Ball) relief
resistance.
Ball Grease • Stainless steel hardware can be offered as an alternative,
D400 All Ball
(Roller) relief
please contact TECO for the surcharge to provide this
feature.
Notes:
• (Items in the parentheses are alternatives). Mounting
• 2 Pole motors up to D180 are suitable for direct drive or belt
• Motors are available in the following mountings -
drive.
• Foot mounted
• 2 Pole motors D200 and larger are suitable for direct drive,
• Foot and Flange mounted
belt drive above D200 please refer to TECO.
• Flange mounted
• Stock motors 4 Pole and larger, up to and including D355
• Foot and C Face mounted
are suitable for direct drive or belt drive.
• C Face mounted
• D400 4 Pole and slower, please refer to TECO with drive
details for correct bearing selection.
• Grease Relief system enables motor to be re-greased Motor Construction
during operation. • Cast Iron frame with integrally cast feet and cast iron end
• V-ring shaft seals are standard but metal backed Gamma shields.
seals are used on the Severe Duty models. • Castings are machined to close tolerances for accurate
alignment and minimum vibration.
• External cooling fan is polypropylene and some larger size
motors utilize metallic fans.
• Fan cover is pressed steel.

Rating Plate
• A stainless steel rating plate containing all details as
specified in AS1359.4 including bearing sizes is fitted to all
motors.

AUSTRALIA & NEW ZEALAND three 3

 Rotor Assembly • Base – Lid surfaces are machined and fitted with one-piece
• High grade insulated cold rolled electro magnetic steel neoprene gasket providing terminal boxes with an IP66
laminations. rating and has a “wrap over” casting on lid.
• Rotor cage is pressure die cast high conductivity aluminium • Terminal box can be rotated in 90° steps through 360° for
with wafter blades and balance supports integrally cast alternate cable entry orientations.
onto the rotor endrings.
• The rotor is pressed and keyed (on larger motors) to a high
tensile steel shaft. Options
• Some available options in this range are as follows:
Smoke Spill • Airstream rated IC418
• Anti-condensation heaters
• Smoke Spill to AS1668.1:1998 is available on modified stock
• Auxiliary terminal boxes for Thermistor / Heater / RTD
motors, direct driving axial fan, cooling IC418.
terminations
• Motor sizes available are D80 ~ D280, 4 pole and slower,
• Cooling Tower application
single or multi-speed and have been tested in conjunction
• Double / non standard shaft extensions
with TECO Variable Speed Drives to AS4429-1999 for either
• Electromechanical “fail safe” Brake Motors
dual purpose or emergency use.
• Encoder / Tacho
• Force cooling IC416
• Insulated bearing
Time / temperature ratings
• IP56, IP65 & IP66 enclosure
Time Motor • Multi-speed motors, certain 2 speed motors are ex stock
Rating Temperature (°C)
(minutes) Insulation Class • Resistance temperature detectors (RTD’s) winding and /
1 120 200°C F or bearing
2 30 300°C H • Rotor Groundary brush
• Smoke Spill
• Special paint systems / colours
Terminal Box • Stainless steel fasteners
• Terminal box is top mounted on motor frame with all metal • Thermistor protection (on motor frames <D160)
to metal joints provided with neoprene gaskets. • Others on request

MONARCH GX - Severe Duty

4 four AUSTRALIA & NEW ZEALAND

TYPICAL PERFORMANCE DATA
CAST IRON TEFC THREE PHASE SQUIRREL CAGE INDUCTION MOTORS
MONARCH GX RANGE 80 - 400L FRAME (415V 50Hz)

EFFICIENCY POWER FACTOR CURRENT TORQUE INERTIA

FULL WEIGHT
OUTPUT FRAME FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED BREAK- ROTOR
LOAD dB(A) foot mount
kW NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR DOWN J = GD2/4
RPM (kg)
(%) (%) (%) (%) (%) (%) (A) (%) Nm %FLT %FLT kg-m2
0.55 1430 80 80.7 80.8 78.2 75.0 65.0 53.0 1.3 650 3.67 220 220 0.0016 50 20
885 80 65.0 68.5 65.7 71.0 61.0 47.0 1.45 470 5.91 190 210 0.0026 46 21
710 90L 73.5 74.4 71.3 61.0 51.0 39.0 1.74 400 7.50 180 200 0.0053 48 31
0.75 2855 80 80.5 81.5 79.4 83.0 75.0 62.0 1.56 680 2.51 220 230 0.0010 59 18
1430 80 82.2 82.2 79.3 75.0 66.0 53.0 1.76 660 5.00 220 220 0.0020 50 21
950 90S 77.7 78.8 75.7 72.0 59.0 47.0 1.81 590 7.56 200 210 0.0038 49 23
710 100L 73.5 75.7 72.8 67.0 58.0 44.0 2.33 400 10.2 180 200 0.0078 51 33
1.1 2860 80 82.2 84.8 83.4 83.0 76.0 64.0 2.22 720 3.68 220 230 0.0013 59 20
1440 90S 83.8 83.8 81.9 77.0 67.0 55.0 2.54 680 7.31 230 230 0.0030 53 26
950 90L 79.9 82.0 79.2 73.0 63.0 51.0 2.62 590 11.1 200 210 0.0053 49 31
710 100L 76.3 79.1 76.9 69.0 59.0 45.0 3.18 500 15.0 180 200 0.0107 51 38
1.5 2885 90S 84.1 85.2 83.5 85.0 79.0 69.0 2.95 750 4.96 220 230 0.0020 64 25
1440 90L 85.0 85.4 83.5 77.0 68.0 55.0 3.32 700 9.96 230 230 0.0038 53 31
955 100L 81.5 81.3 78.7 75.0 62.0 50.0 3.51 600 15.0 200 210 0.0107 53 38
700 112M 78.4 80.8 79.4 69.0 61.0 47.0 3.86 500 20.5 180 200 0.0162 53 52
2.2 2875 90L 85.6 86.8 86.0 85.0 81.0 71.0 4.21 760 7.28 220 230 0.0026 64 29
1450 100L 86.4 86.1 84.3 81.0 73.0 61.0 4.43 740 14.5 230 230 0.0077 56 40
955 112M 83.4 84.3 83.0 76.0 67.0 56.0 4.96 650 22.0 200 210 0.0151 57 52
715 132S 80.9 82.9 81.8 71.0 65.0 51.0 5.33 600 29.5 180 200 0.0331 53 67
3 2880 100L 86.7 88.2 88.0 87.0 86.0 78.0 5.53 810 9.96 220 230 0.0042 68 39
1450 100L 87.4 87.0 84.5 81.0 71.0 59.0 6.12 740 19.8 230 230 0.0093 56 44
970 132S 84.9 86.0 83.9 76.0 67.0 55.0 6.47 680 29.6 210 210 0.0318 61 67
715 132M 82.7 84.4 83.1 71.0 62.0 49.0 7.01 550 40.0 200 200 0.0440 56 80
4 2910 112M 87.6 87.4 86.7 88.0 85.0 76.0 7.22 830 13.1 220 230 0.0058 69 50
1455 112M 88.3 88.0 86.0 82.0 72.0 59.0 8.08 750 26.3 230 230 0.0128 57 58
970 132M 86.1 88.3 87.7 76.0 69.0 56.0 8.73 690 39.4 210 210 0.0394 61 78
720 160M 84.2 88.0 87.5 73.0 69.0 60.0 8.9 600 54.6 190 210 0.0771 60 105
5.5 2920 132S 88.5 89.8 89.0 88.0 85.0 77.0 9.94 830 18.0 220 230 0.0128 72 69
1455 132S 89.2 89.4 88.2 83.0 77.0 68.0 10.6 780 36.1 230 230 0.0285 63 70
970 132M 87.4 87.7 86.2 77.0 66.0 55.0 12.0 710 54.2 210 210 0.0494 61 87
715 160M 85.8 88.4 87.8 74.0 70.0 58.0 11.9 600 73.3 200 200 0.0989 60 113
7.5 2920 132S 89.5 90.1 89.2 88.0 86.0 80.0 13.4 770 24.6 220 230 0.0151 72 75
1455 132M 90.1 90.4 89.4 84.0 78.0 68.0 14.0 740 49.2 230 230 0.0366 63 90
970 160M 88.5 89.9 89.5 78.0 74.0 64.0 14.9 670 74.1 210 210 0.0964 65 118
720 160L 87.2 88.6 87.9 75.0 71.0 59.0 16.0 600 99.9 200 200 0.131 60 139
10 1460 132M 90.1 91.1 90.9 84.0 77.0 66.0 18.4 740 60.3 230 230 0.0390 67 94
11 2940 160M 90.6 90.9 90.3 89.0 88.0 83.0 19.5 750 35.7 220 230 0.0489 78 120
1470 160M 91.0 91.7 91.2 85.0 80.0 71.0 20.0 700 71.8 220 230 0.0771 67 122
970 160L 89.8 90.5 89.9 79.0 71.0 60.0 21.8 690 108 200 210 0.127 65 140
730 180L 88.8 89.0 88.6 76.0 72.0 62.0 22.5 660 144 200 200 0.214 62 184
15 2940 160M 91.3 91.6 90.9 89.0 88.0 84.0 26.8 750 48.8 220 230 0.0559 78 128
1470 160L 91.8 92.1 91.8 85.0 80.0 72.0 26.5 700 97.6 220 230 0.101 67 146
980 180L 90.7 90.4 88.8 81.0 79.0 70.0 27.6 720 146 200 210 0.201 65 185
730 200L 90.0 90.3 89.5 76.0 74.0 63.0 30.3 660 197 200 200 0.401 65 260
18.5 2940 160L 91.8 91.6 91.0 89.0 89.0 84.0 32.6 750 60.1 220 230 0.0648 78 142
1470 180M 92.2 92.0 91.6 86.0 85.0 77.0 32.5 750 120 220 230 0.152 68 179
985 200L 91.3 91.1 90.6 81.0 78.0 72.0 34.8 720 180 210 210 0.325 68 242
735 225S 90.7 90.7 89.8 76.0 69.0 57.0 37.7 660 241 190 200 0.529 65 275

Notes: 1. Output at 415V also suitable for 380V and 400V operation.For 380V multiply full load current by 1.092. For 400V multiply full load current by 1.0375.
2. Test Method : AS1359 , Table 2 , Method B.
3. Tolerance : AS60034.1
4. dB(A): Mean Sound Pressure Level at no load and 1 metre.

AUSTRALIA & NEW ZEALAND five 5

 TYPICAL PERFORMANCE DATA
CAST IRON TEFC 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS
MONARCH GX RANGE 80 - 400L FRAME (415V 50Hz)

EFFICIENCY POWER FACTOR CURRENT TORQUE INERTIA

OUT FULL WEIGHT
FRAME FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED BREAK ROTOR
PUT LOAD dB(A) foot mount
NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR DOWN J = GD2/4
kW RPM (kg)
(%) (%) (%) (%) (%) (%) (A) (%) Nm %FLT %FLT kg-m2
22 2945 180M 92.2 92.0 91.0 90.0 89.0 84.0 36.2 750 71.6 220 230 0.0808 81 176
1470 180L 92.6 92.6 91.8 86.0 85.0 77.0 37.8 780 143 220 230 0.187 68 206
980 200L 91.8 91.9 91.3 83.0 80.0 74.0 40.2 750 214 210 210 0.371 68 258
735 225M 91.2 91.6 90.7 78.0 72.0 61.0 43.3 660 287 190 200 0.626 65 309
30 2955 200L 92.9 92.6 91.8 90.0 90.0 86.0 49.0 750 96.9 200 230 0.163 84 250
1475 200L 93.2 93.5 93.0 86.0 84.0 78.0 52.8 720 195 220 230 0.285 71 255
985 225M 92.5 92.9 92.2 84.0 81.0 73.0 52.4 710 291 210 210 0.533 68 303
740 250M 92.1 91.8 90.7 79.0 71.0 60.0 59.3 660 388 190 200 0.914 67 401
37 2955 200L 93.3 93.0 92.3 90.0 89.0 85.0 60.6 750 120 200 230 0.172 84 258
1480 225S 93.6 93.8 93.2 87.0 84.0 79.0 64.2 740 239 200 230 0.473 73 305
985 250M 93.0 92.7 91.8 85.0 83.0 75.0 64.0 700 358 210 210 0.877 70 395
741 280S 92.7 92.6 91.3 78.0 74.0 64.0 69.0 660 477 190 200 1.85 68 567
45 2970 225M 93.7 93.8 93.2 90.0 89.0 86.0 72.7 750 145 200 230 0.302 84 336
1480 225M 93.9 93.9 93.6 87.0 85.0 80.0 78.1 740 290 220 230 0.554 73 342
991 280S 93.5 93.7 92.6 86.0 83.0 75.0 77.0 700 434 210 200 1.85 72 567
742 280M 93.2 93.6 92.5 79.0 76.0 66.0 84.0 660 579 190 200 2.22 68 651
55 2975 250M 94.0 94.1 93.7 90.0 90.0 86.0 89.5 750 177 200 230 0.420 85 434
1480 250M 94.2 94.2 93.5 87.0 87.0 81.0 91.6 740 356 200 220 0.751 75 428
990 280M 93.9 94.4 93.5 87.0 84.0 80.0 94.0 700 531 210 200 2.12 72 625
741 315S 93.7 93.6 92.4 78.0 73.0 62.0 101 660 710 180 210 2.97 74 1000
75 2979 280SA 94.6 94.4 92.6 90.0 89.0 84.0 121 750 241 200 230 0.986 86 616
1485 250M*** 94.7 94.5 93.4 88.0 88.0 83.0 127 740 483 220 230 0.824 78 515
1487 280S 94.7 95.2 94.4 87.0 84.0 76.0 127 720 482 220 230 1.92 78 657
989 315S 94.4 94.1 93.3 85.0 80.0 73.0 128 700 729 200 200 2.61 77 990
741 315M 94.4 94.2 93.3 79.0 75.0 65.0 136 660 967 180 200 3.96 74 1100
90 2978 280M 94.8 94.5 92.8 91.0 90.0 88.0 145 750 289 200 230 1.04 86 660
1486 280M 95.0 95.2 94.4 87.0 84.0 77.0 151 720 579 220 230 2.32 78 748
988 315M 94.8 94.9 94.5 86.0 83.0 76.0 153 700 872 200 200 3.04 77 1080
741 315L 94.7 94.6 93.8 81.0 77.0 68.0 161 660 1161 180 200 4.65 74 1160
110 2980 280M*** 95.1 95.4 94.9 92.0 91.0 90.0 177 710 353 180 220 1.30 86 755
2975 315S 95.1 94.8 93.1 92.0 91.0 89.0 177 710 353 180 220 1.33 88 980
1486 280M*** 95.3 95.3 94.6 88.0 86.0 79.0 185 720 708 220 230 2.47 85 780
1489 315S 95.3 95.2 94.3 89.0 89.0 84.0 182 690 706 210 220 2.34 85 1000
989 315L 95.1 95.1 94.4 86.0 83.0 76.0 187 670 1062 200 200 3.71 77 1150
741 315L 95.1 94.8 94.1 81.0 79.0 72.0 196 660 1422 180 200 5.40 74 1230
132 2978 315M 95.4 95.2 94.1 91.0 89.0 84.0 211 710 423 180 220 1.50 88 1080
1488 315M 95.5 95.5 94.7 89.0 88.0 84.0 219 690 847 210 220 2.58 85 1100
988 315L 95.4 95.8 95.0 87.0 85.0 79.0 223 670 1275 200 200 4.24 77 1210
742 355M 95.4 95.5 94.7 82.0 78.0 67.0 235 640 1700 180 200 8.36 82 1700
160 2978 315L 95.5 95.2 94.3 90.0 89.0 84.0 256 710 513 180 220 1.67 91 1160
1488 315L 95.7 95.9 95.1 90.0 88.0 80.0 261 690 1028 210 220 2.96 89 1160
991 355M 95.6 95.7 95.4 87.0 86.0 80.0 265 670 1544 190 200 7.44 84 1650
742 355M 95.7 95.6 95.1 82.0 79.0 72.0 284 640 2061 180 200 9.59 82 1750
200 2978 315L 95.6 95.7 95.2 91.0 90.0 84.0 320 710 641 180 220 1.88 87 1190
1487 315L 95.5 95.6 95.0 89.0 88.0 84.0 328 690 1284 200 220 3.46 89 1270
990 355M 95.6 95.7 95.2 88.0 87.0 82.0 331 670 1929 190 200 9.10 84 1750
741 355L 95.7 95.8 95.3 82.0 81.0 75.0 355 640 2570 180 200 11.30 73 1850

Notes: 1. Output at 415V also suitable for 380V and 400V operation.For 380V multiply full load current by 1.092. For 400V multiply full load current by 1.0375.
2. Test Method: AS1359, Table 2, Method B.
3. Tolerance: AS60034.1
4. Mean Sound Pressure Level at no load and 1 metre.
5. Frame sizes to AS1359.30 1997 Western European allocations from
CENELEC HD231 apart from motors with suffix*** which are to
AS1359.30 1997 Australia British allocations.

6 six AUSTRALIA & NEW ZEALAND

TYPICAL PERFORMANCE DATA
CAST IRON TEFC 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS
MONARCH GX RANGE 80 - 400L FRAME (415V 50Hz)
EFFICIENCY POWER FACTOR CURRENT TORQUE INERTIA
FULL WEIGHT
OUTPUT FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED BREAK ROTOR
LOAD FRAME NO. dB(A) foot mout
kW LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR DOWN J = GD2/4
RPM (kg)
(%) (%) (%) (%) (%) (%) (A) (%) Nm %FLT %FLT kg-m2
250 2978 355M 95.6 95.7 95.0 90.0 89.0 89.0 394 710 801 160 220 4.02 91 1760
1490 355M 95.8 95.9 95.1 90.0 89.0 89.0 403 690 1603 210 220 6.60 85 1830
990 355L 95.6 95.7 95.0 88.0 87.0 81.0 413 670 2412 190 220 10.80 75 1850
743 400L 95.7 95.8 95.1 80.0 79.0 73.0 454 650 3213 160 220 19.10 75 2770
315 2978 355L 96.4 96.3 95.6 92.0 91.0 85.0 494 710 1010 160 220 4.86 91 1850
1490 355L 96.4 96.3 95.6 90.0 89.0 83.0 506 690 2019 210 220 7.55 85 1850
992 400L 96.1 96.0 95.3 86.0 85.0 79.0 530 650 3032 160 220 18.50 79 2764
743 400L 95.8 95.7 95.0 80.0 78.0 73.0 572 650 4049 160 220 23.00 75 2980
355 1489 400L 96.4 96.3 95.6 87.0 86.0 80.0 589 690 2277 160 220 13.30 85 2800
993 400L 96.3 96.2 95.5 86.0 85.0 79.0 672 650 3414 160 220 20.70 80 2910
742 400L 95.8 95.7 95.2 80.0 78.0 72.0 645 650 4569 160 220 25.20 75 3120
400 1489 400L 96.4 96.3 95.6 87.0 86.0 80.0 663 690 2565 160 220 14.10 85 2890
993 400L 96.3 96.2 95.5 86.0 85.0 79.0 672 650 3847 160 220 22.30 81 3030
450 1489 400L 96.5 96.4 95.7 87.0 86.0 80.0 746 690 2886 160 220 15.30 85 2980
992 400L 96.4 96.3 95.6 86.0 85.0 79.0 755 650 4332 160 220 22.30 81 3030
500 1489 400L 96.6 96.5 95.8 88.0 87.0 81.0 818 690 3207 160 220 17.10 85 3080

TWO SPEED PERFORMANCE DATA

TWO SPEED (415V 50Hz) HIGH SPEED, FULL LOAD LOW SPEED, FULL LOAD
WEIGHT
OUTPUT kW OUT PUT kW FRAME EFFICIENCY POWER CURRENT EFFICIENCY POWER CURRENT foot mount
RPM RPM (kg)
HIGH SPEED LOW SPEED NO. % FACTOR % (A) % FACTOR % (A)

2 Pole 4 Pole (Tapped Wound)

0.8 0.16 D80 2745 71.4% 89.5% 1.83 1425 71.0% 72.2% 0.43 17
1.2 0.24 D90S 2825 72.3% 88.6% 2.66 1430 75.2% 76.7% 0.58 22
1.7 0.34 D90L 2840 75.1% 89.5% 3.66 1430 78.9% 77.2% 0.84 25
2.4 0.48 D100L 2850 76.2% 91.5% 4.97 1450 79.1% 77.3% 1.07 33
3.3 0.66 D112M 2805 82.9% 92.9% 6.19 1465 82.6% 81.5% 1.42 43
4.4 0.88 D132S 2895 81.7% 89.9% 8.83 1475 85.5% 80.8% 1.83 64
6.1 1.2 D132S 2875 83.3% 91.5% 12.0 1470 86.8% 83.4% 2.38 70
8.3 1.7 D160M 2920 86.9% 90.0% 14.4 1475 84.5% 80.0% 3.40 117
12 2.4 D160L 2935 88.2% 93.0% 21.3 1480 86.7% 82.8% 4.80 147

4 Pole 8 Pole (Tapped Wound)

0.6 0.12 D80 1405 71.1% 71.0% 1.65 655 43.4% 52.0% 0.74 17
0.8 0.16 D90S 1405 74.5% 85.0% 1.76 680 55.3% 60.0% 0.67 22
1.2 0.24 D90L 1415 77.4% 81.0% 2.66 690 60.1% 55.0% 1.01 27
1.7 0.34 D100L 1420 79.2% 86.4% 3.43 705 73.7% 60.1% 1.07 34
2.4 0.48 D100L 1410 80.6% 86.0% 4.78 710 60.4% 52.0% 2.14 38
3.3 0.66 D112M 1420 79.4% 84.8% 6.72 710 75.9% 62.0% 1.99 43
4.4 0.88 D132S 1455 81.1% 78.4% 9.54 730 77.2% 54.4% 2.83 68
6.1 1.2 D132M 1460 84.8% 85.9% 12.2 730 80.2% 59.5% 3.72 81
8.3 1.7 D160M 1450 86.5% 88.6% 15.0 730 85.1% 65.0% 4.40 123
12 2.4 D160L 1450 87.8% 91.9% 21.3 730 86.8% 74.0% 5.90 144
17 3.4 D180L 1470 89.9% 87.2% 30.1 735 86.7% 67.1% 8.10 190

4 Pole 6 Pole (Dual Wound)

0.55 0.18 D80 1405 66.8% 68.0% 1.67 930 45.9% 45.0% 1.20 17
0.75 0.25 D90S 1425 65.4% 76.6% 1.84 950 59.5% 56.0% 0.85 22
1.1 0.36 D90L 1425 69.8% 80.4% 2.56 940 63.8% 67.0% 1.20 27
1.5 0.6 D100L 1445 78.2% 76.4% 3.39 950 69.0% 63.1% 1.85 34
2.2 0.75 D100L 1430 80.7% 81.9% 4.54 955 65.3% 59.1% 2.65 38
3 1 D112M 1455 83.1% 74.5% 6.60 965 73.3% 65.2% 2.94 43
4 1.3 D132S 1460 85.5% 81.5% 8.14 970 77.6% 66.9% 3.80 68
5.5 1.8 D132M 1465 86.9% 78.5% 11.5 975 79.3% 65.4% 5.08 81
7.5 2.5 D160M 1465 88.8% 83.1% 14.2 980 84.8% 66.0% 6.4 123
11 3.5 D160L 1460 88.8% 85.3% 20.2 980 84.7% 66.0% 8.7 144
15 5 D180M 1465 88.7% 92.7% 26.0 985 83.6% 80.8% 10.6 182

6 Pole 8 Pole (Dual Wound)

0.55 0.24 D90S 960 67.4% 63.0% 1.80 710 52.9% 55.0% 1.14 23
0.75 0.32 D90L 950 68.9% 70.0% 2.16 705 53.6% 53.0% 1.55 25
1.1 0.47 D100L 960 72.3% 63.0% 3.35 710 60.0% 54.0% 2.02 33
1.5 0.55 D112M 955 77.5% 75.4% 3.70 710 75.9% 62.0% 2.04 45
2.2 0.95 D132S 970 77.1% 72.5% 5.18 725 75.7% 62.8% 2.85 63
3 1.3 D132M 970 82.2% 73.7% 6.62 720 78.6% 70.4% 3.59 73
4 1.7 D132M 970 82.6% 78.3% 8.78 725 75.9% 68.1% 4.84 84
5.5 2.4 D160M 970 84.3% 81.1% 11.0 730 79.4% 63.0% 6.60 119
7.5 3.2 D160L 970 85.8% 83.8% 16.0 730 81.3% 68.2% 8.00 147
11 4.7 D180L 980 87.6% 80.9% 21.8 735 83.3% 75.9% 11.2 195
13 5.5 D200L 980 89.1% 85.1% 24.0 735 81.5% 69.6% 13.4 220
15 6.5 D200L 980 89.6% 83.7% 28.0 735 82.2% 70.7% 15.6 250

AUSTRALIA & NEW ZEALAND seven 7

 OUTLINE DIMENSIONS SHEET
MONARCH GX CAST IRON 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS FRAME 80 - 400 FOOT MOUNT
TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE ROTOR

SHAFT DETAIL
OUTPUT kW FRAME
A AA AB AC B BB C H HA HD
2P 4P 6P 8P SIZE
0.75/1.1 0.55/0.75 0.55 - 80 125 34 160 160 100 130 50 80 10 235
1.5 1.1 0.75 - 90S 140 36 180 175 100 130 56 90 12 255
2.2 1.5 1.1 - 90L 140 36 180 175 125 210 56 90 12 255
3 2.2/3 1.5 0.75/1.1 100L 160 40 200 200 140 235 63 100 14 270
4 4 2.2 1.5 112M 190 45 230 220 140 250 70 112 15 300
5.5/7.5 5.5 3 2.2 132S 216 55 270 275 140 230 89 132 18 345
- 7.5 4/5.5 3 132M 216 55 270 275 178 270 89 132 18 345
11/15 11 7.5 4/5.5 160M 254 65 320 314 210 250 108 160 20 420
18.5 15 11 7.5 160L 254 65 320 314 254 294 108 160 20 420
22 18.5 - - 180M 279 70 355 348 241 311 121 180 22 455
- 22 15 11 180L 279 70 355 348 279 349 121 180 22 455
30/37 30 18.5/22 15 200L 318 70 395 386 305 369 133 200 25 505
- 37 - 18.5 225S 356 75 435 432 286 368 149 225 28 560
45 - - - 225M 356 75 435 432 311 393 149 225 28 560
- 45 30 22 225M 356 75 435 432 311 393 149 225 28 560
55 - - - 250M 406 80 490 472 349 445 168 250 30 615
- 55 37 30 250M 406 80 490 472 349 445 168 250 30 615
75** 250M 406 80 490 472 349 445 168 250 30 615
75 - - - 280S 457 85 550 534 368 530 190 280 35 700
- 75 45 37 280S 457 85 550 534 368 530 190 280 35 700
90/110** - - - 280M 457 85 550 534 419 581 190 280 35 700
- 90 55 45 280M 457 85 550 534 419 581 190 280 35 700
- 110** - - 280M 457 85 550 534 419 581 190 280 35 700
110 - - - 315S 508 120 635 620 406 616 216 315 45 815
- 110 75 55 315S 508 120 635 620 406 616 216 315 45 815
132 - - - 315M 508 120 635 620 457 676 216 315 45 815
- 132 90 75 315M 508 120 635 620 457 676 216 315 45 815
160/200 - - - 315L 508 120 635 620 508 726 216 315 45 815
- 160/200 110/132 90/110 315L 508 120 635 620 508 726 216 315 45 815
250 - - - 355M 610 116 730 710 560 820 254 355 52 1010
- 250(D) 160/200 132/160 355M 610 116 730 710 560 820 254 355 52 1010
- 250(B) - - 355M 610 116 730 710 560 820 254 355 52 1010
315 - - - 355L 610 116 730 710 630 820 254 355 52 1010
- 315(D) 250 200 355L 610 116 730 710 630 820 254 355 52 1010
- 315(B) - - 355L 610 116 730 710 630 820 254 355 52 1010
355/400 315/355 250/315
- 400L*** 686 150 840 810 710 1075 280 400 55 1160
450/500 400/450 355

FRAME SHAFT EXTENSION BEARINGS

SIZE K KK L LD D E ED F G GA DH DE NDE
80 10 M25x1.5 300 75 19 40 22 6 15.5 21.5 M6x12 6204ZZ 6204ZZ
90S 10 M25x1.5 355 75 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
90L 10 M25X1.5 385 75 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
100L 12 M32x1.5 430 83 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
112M 12 M32x1.5 465 87 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
132S 12 M32x1.5 510 102 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
132M 12 M32x1.5 550 102 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
160M 15 M40x1.5 615 142 42 110 80 12 37 45 M16x32 6309ZZ(6209ZZ) 6209ZZ
160L 15 M40x1.5 670 142 42 110 80 12 37 45 M16x32 6309ZZ(6209ZZ) 6209ZZ
180M 15 M40x1.5 700 164 48 110 80 14 42.5 51.5 M16x32 6311(6211) 6211
180L 15 M40x1.5 740 164 48 110 80 14 42.5 51.5 M16x32 6311(6211) 6211
200L 19 M50x1.5 770 191 55 110 80 16 49 59 M20x40 6312(6212) 6212
225S(4-8) 19 M50x1.5 815 191 60 140 100 18 53 64 M20x40 6313 6312
225M(2) 19 M50x1.5 820 197 55 110 80 16 49 59 M20x40 6312 6312
225M(4-8) 19 M50x1.5 845 197 60 140 100 18 53 64 M20x40 6313 6312
250M(2) 24 BLANK 910 215 60 140 100 18 53 64 M20x40 6313 6313
250M(4-8) 24 BLANK 910 215 65 140 100 18 58 69 M20x40 NU314 6313
250M(75kW) 24 BLANK 910 215 70 140 110 20 62.5 74.5 M20x40 NU315 6313
280S(2) 24 BLANK 1000 221 65 140 100 18 58 69 M20x40 6314 6314
280S(4-8) 24 BLANK 1000 221 75 140 100 20 67.5 79.5 M20x40 NU317 6314
280M(2) 24 BLANK 1050 221 65 140 100 18 58 69 M20x40 6314 6314
280M(4-8) 24 BLANK 1050 221 75 140 100 20 67.5 79.5 M20x40 NU317 6314
280M(110kW) 24 BLANK 1050 221 80 170 140 22 71 85 M20x40 NU317 6314
315S(2) 28 BLANK 1178 257 65 140 100 18 58 69 M20x40 6317 6317
315S(4-8) 28 BLANK 1208 257 80 170 130 22 71 85 M20x40 NU319 6319
315M(2) 28 BLANK 1238 257 65 140 100 18 58 69 M20x40 6317 6317
315M(4-8) 28 BLANK 1268 257 80 170 130 22 71 85 M20x40 NU319 6319
315L(2) 28 BLANK 1288 257 65 140 100 18 58 69 M20x40 6317 6317
315L(4-8) 28 BLANK 1318 257 80 170 130 22 71 85 M20x40 NU319 6319
355M(2) 28 BLANK 1500 284 75 140 100 20 67.5 79.5 M20x40 6319 6319
355M(4-8) 28 BLANK 1530 284 95 170 130 25 85 99 M24x48 NU322 6322
355M(250kW) 28 BLANK 1530 284 110 210 170 28 100 116 M24x48 NU324 6322
355L(2) 28 BLANK 1500 284 75 140 100 20 67.5 79.5 M20x40 6319 6319
355L(4-8) 28 BLANK 1530 284 95 170 130 25 86 100 M24x48 NU322 6322
355L(315kW) 28 BLANK 1530 284 110 210 170 28 100 116 M24x48 NU324 6322
400L(4-8) 35 BLANK 1910 425 100 210 170 28 90 106 M24x48 NU324 6324
Notes: 1. Dimensional data subject to change without notice. 6. Two speed motor mandatory mounting and shaft dimensions are as per
2. Lifting facilities provided on motors frame size D100 and larger. this catalogue except for 80 - 132 frame . Refer Teco for two speed motor
3. For tolerances see page 11. outline drawings.
4. Bearing numbers in brackets apply to 2 pole motors. 7. D = direct drive , B = belt drive.
5. **AS1359 Australian/British frame allocations available for 110kw 2 pole, 8. *** = Direct drive only , refer teco for belt drive dimensions.
75kw and 110kw 4 pole.

8 eight AUSTRALIA & NEW ZEALAND

OUTLINE DIMENSIONS SHEET
MONARCH GX CAST IRON 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS FRAME 80 - 280 FLANGE MOUNT
TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE ROTOR

SHAFT DETAIL FIGURE 1 FIGURE 2

OUTPUT kW FRAME FIG.

AC AD HF L LA M N P S T
2P 4P 6P 8P SIZE NO.
0.75/1.1 0.55/0.75 0.55 - 80 1 158 155 200 300 12 165 130 200 12 3.5
1.5 1.1 0.75 - 90S 1 175 160 200 355 12 165 130 200 12 3.5
2.2 1.5 1.1 - 90L 1 175 160 200 385 12 165 130 200 12 3.5
3 2.2/3 1.5 0.75/1.1 100L 1 197 180 270 430 13 215 180 250 15 4
4 4 2.2 1.5 112M 1 220 190 275 465 14 215 180 250 15 4
5.5/7.5 5.5 3 2.2 132S 1 262 210 330 510 14 265 230 300 15 4
- 7.5 4/5.5 3 132M 1 262 210 330 550 14 265 230 300 15 4
11/15 11 7.5 4/5.5 160M 1 314 255 385 615 15 300 250 350 19 5
18.5 15 11 7.5 160L 1 314 255 385 670 15 300 250 350 19 5
22 18.5 - - 180M 1 348 280 430 700 15 300 250 350 19 5
- 22 15 11 180L 1 348 280 430 740 15 300 250 350 19 5
30/37 30 18.5/22 15 200L 1 386 305 480 770 17 350 300 400 19 5
- 37 - 18.5 225S 2 432 335 535 815 20 400 350 450 19 5
45 - - - 225M 2 432 335 535 820 20 400 350 450 19 5
- 45 30 22 225M 2 432 335 535 845 20 400 350 450 19 5
55 - - - 250M 2 472 370 595 910 22 500 450 550 19 5
- 55 37 30 250M 2 472 370 595 910 22 500 450 550 19 5
75 - - - 280S 2 534 410 680 1000 22 500 450 550 19 5
- 75 45 37 280S 2 534 410 680 1000 22 500 450 550 19 5
90 - - - 280M 2 534 410 680 1050 22 500 450 550 19 5
- 90 55 45 280M 2 534 410 680 1050 22 500 450 550 19 5

FRAME SHAFT EXTENSION BEARINGS

SIZE KK D E ED F G GA DH DE NDE
80 M25x1.5 19 40 22 6 15.5 21.5 M6x12 6204ZZ 6204ZZ
90S M25x1.5 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
90L M25X1.5 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
100L M32x1.5 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
112M M32x1.5 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
132S M32x1.5 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
132M M32x1.5 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
160M M40x1.5 42 110 80 12 37 45 M16x32 6309ZZ(6209ZZ) 6209ZZ
160L M40x1.5 42 110 80 12 37 45 M16x32 6309ZZ(6209ZZ) 6209ZZ
180M M40x1.5 48 110 80 14 42.5 51.5 M16x32 6311(6211) 6211
180L M40x1.5 48 110 80 14 42.5 51.5 M16x32 6311(6211) 6211
200L M50x1.5 55 110 80 16 49 59 M20x40 6312(6212) 6212
225S(4-8) M50x1.5 60 140 100 18 53 64 M20x40 6313 6312
225M(2) M50x1.5 55 110 80 16 49 59 M20x40 6312 6312
225M(4-8) M50x1.5 60 140 100 18 53 64 M20x40 6313 6312
250M(2) BLANK 60 140 100 18 53 64 M20x40 6313 6313
250M(4-8) BLANK 65 140 100 18 58 69 M20x40 NU314 6313
280S(2) BLANK 65 140 100 18 58 69 M20x40 6314 6314
280S(4-8) BLANK 75 140 100 20 67.5 79.5 M20x40 NU317 6314
280M(2) BLANK 65 140 100 18 58 69 M20x40 6314 6314
280M(4-8) BLANK 75 140 100 20 67.5 79.5 M20x40 NU317 6314

MONARCH GX CAST IRON 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS FRAME 80 - 250 FOOT MOUNT
TOTALLY ENCLOSED AIR OVER MOTOR IC418 (AIRSTREAM RATED)
OUTPUT kW FRAME E L LD
2P 4P 6P 8P SIZE
0.75/1.1 0.55/0.75 0.55 - 80 40 248 76
1.5 1.1 0.75 - 90S 50 300 75
2.2 1.5 1.1 - 90L 50 330 75
3 2.2/3 1.5 0.75/1.1 100L 60 380 83
4 4 2.2 1.5 112M 60 410 87
5.5/7.5 5.5 3 2.2 132S 80 430 102
- 7.5 4/5.5 3 132M 80 470 102
11/15 11 7.5 4/5.5 160M 110 522 142
18.5 15 11 7.5 160L 110 566 142
22 18.5 - - 180M 110 587 164
- 22 15 11 180L 110 625 164
30/37 30 18.5/22 15 200L 110 660 191
- 37 - 18.5 225S 140 703 197
45 - - - 225M 110 698 197
- 45 30 22 225M 140 728 197
55 - - - 250M 140 790 215
- 55 37 30 250M 140 790 215

Notes: 1. Dimensional data subject to change without notice.

2. Lifting facilities provided on motors frame size D100 and larger.
3. For tolerances see page 11.
4. Bearing numbers in brackets apply to 2 pole motors.

AUSTRALIA & NEW ZEALAND nine 9

 OUTLINE DIMENSIONS SHEET
MONARCH GX CAST IRON 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS FRAME 80 - 400L FOOT & FLANGE MOUNT
TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE ROTOR

SHAFT DETAIL
FIGURE 1 FIGURE 2

OUTPUT kW FRAME A AA AB AC B BB C H HA HD K KK L
2P 4P 6P 8P SIZE
0.75/1.1 0.55/0.75 0.55 - 80 125 34 160 160 100 130 50 80 10 235 10 M25x1.5 300
1.5 1.1 0.75 - 90S 140 36 180 175 100 130 56 90 12 255 10 M25x1.5 355
2.2 1.5 1.1 - 90L 140 36 180 175 125 210 56 90 12 255 10 M25X1.5 385
3 2.2/3 1.5 0.75/1.1 100L 160 40 200 197 140 235 63 100 14 270 12 M32x1.5 430
4 4 2.2 1.5 112M 190 45 230 220 140 250 70 112 15 300 12 M32x1.5 465
5.5/7.5 5.5 3 2.2 132S 216 55 270 262 140 230 89 132 18 345 12 M32x1.5 510
- 7.5 4/5.5 3 132M 216 55 270 262 178 270 89 132 18 345 12 M32x1.5 550
11/15 11 7.5 4/5.5 160M 254 65 320 314 210 250 108 160 20 420 15 M40x1.5 615
18.5 15 11 7.5 160L 254 65 320 314 254 294 108 160 20 420 15 M40x1.5 670
22 18.5 - - 180M 279 70 355 348 241 311 121 180 22 455 15 M40x1.5 700
- 22 15 11 180L 279 70 355 348 279 349 121 180 22 455 15 M40x1.5 740
30/37 30 18.5/22 15 200L 318 70 395 386 305 369 133 200 25 505 19 M50x1.5 770
- 37 - 18.5 225S 356 75 435 432 286 368 149 225 28 560 19 M50x1.5 815
45 - - - 225M 356 75 435 432 311 393 149 225 28 560 19 M50x1.5 820
- 45 30 22 225M 356 75 435 432 311 393 149 225 28 560 19 M50x1.5 845
55 - - - 250M 406 80 490 472 349 445 168 250 30 615 24 BLANK 910
- 55 37 30 250M 406 80 490 472 349 445 168 250 30 615 24 BLANK 910
- 75** - - 250M 406 80 490 472 349 445 168 250 30 615 24 BLANK 910
75 - - - 280S 457 85 550 534 368 530 190 280 35 700 24 BLANK 1000
- 75 45 37 280S 457 85 550 534 368 530 190 280 35 700 24 BLANK 1000
90 - - - 280M 457 85 550 534 419 581 190 280 35 700 24 BLANK 1050
- 90/110 55 45 280M 457 85 550 534 419 581 190 280 35 700 24 BLANK 1050
110 - - - 315S 508 120 635 620 406 616 216 315 45 815 28 BLANK 1178
- 110 75 45 315S 508 120 635 620 406 616 216 315 45 815 28 BLANK 1208
132 - - - 315M 508 120 635 620 457 676 216 315 45 815 28 BLANK 1238
- 132 90 75 315M 508 120 635 620 457 676 216 315 45 815 28 BLANK 1268
160/200 - - - 315L 508 120 635 620 508 726 216 315 45 815 28 BLANK 1288
- 160/200 110/132 90/110 315L 508 120 635 620 508 726 216 315 45 815 28 BLANK 1318
250 - - - 355M 610 116 730 710 560 820 254 355 52 1010 28 BLANK 1500
- 250(D) 160/200 132/160 355M 610 116 730 710 560 820 254 355 52 1010 28 BLANK 1530
315 - - - 355L 610 116 730 710 630 820 254 355 52 1010 28 BLANK 1500
- 315(D) 250 200 355L 610 116 730 710 630 820 254 355 52 1010 28 BLANK 1530
355/400 315/355
- 250/315 355 400L 686 150 840 826 710 1075 280 400 55 1160 35 BLANK 1910
450/500 400/450

FRAME SHAFT EXTENSION BEARINGS

SIZE LA LD M N P S T D E ED F G GA DH DE NDE
80 12 76 165 130 200 12 3.5 19 40 22 6 15.5 21.5 M6x12 6204ZZ 6204ZZ
90S 12 75 165 130 200 12 3.5 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
90L 12 75 165 130 200 12 3.5 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
100L 13 83 215 180 250 15 4 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
112M 14 87 215 180 250 15 4 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
132S 14 102 265 230 300 15 4 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
132M 14 102 265 230 300 15 4 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
160M 15 142 300 250 350 19 5 42 110 80 12 37 45 M16x32 6309ZZ (6209ZZ) 6209ZZ
160L 15 142 300 250 350 19 5 42 110 80 12 37 45 M16x32 6309ZZ (6209ZZ) 6209ZZ
180M 15 164 300 250 350 19 5 48 110 80 14 42.5 51.5 M16x32 6311 (6211) 6211
180L 15 164 300 250 350 19 5 48 110 80 14 42.5 51.5 M16x32 6311 (6211) 6211
200L 17 191 350 300 400 19 5 55 110 80 16 49 59 M20x40 6312 (6212) 6212
225S(4-8) 20 191 400 350 450 19 5 60 140 100 18 53 64 M20x40 6313 6312
225M(2) 20 197 400 350 450 19 5 55 110 80 16 49 59 M20x40 6312 6312
225M(4-8) 20 197 400 350 450 19 5 60 140 100 18 53 64 M20x40 6313 6312
250M(2) 22 215 500 450 550 19 5 60 140 100 18 53 64 M20x40 6313 6313
250M(4-8) 22 215 500 450 550 19 5 65 140 100 18 58 69 M20x40 NU314 6313
250M(75**) 22 215 500 450 550 19 5 70 140 110 20 62.5 74.5 M20x40 NU315 6313
280S(2) 22 221 500 450 550 19 5 65 140 100 18 58 69 M20x40 6314 6314
280S(4-8) 22 221 500 450 550 19 5 75 140 100 18 67.5 79.5 M20x40 NU317 6314
280M(2) 22 221 500 450 550 19 5 65 140 100 18 53 69 M20x40 6314 6314
280M(4-8) 22 221 500 450 550 19 5 75 140 100 20 67.5 79.5 M20x40 NU317 6314
280M(110**) 22 221 500 450 550 19 5 80 170 140 22 71 85 M20x40 NU317 6314
315S(2) 22 257 600 550 660 24 6 65 140 100 18 58 69 M20x40 6317 6317
315S(4-8) 22 257 600 550 660 24 6 80 170 100 22 71 85 M20x40 NU319 6319
315M(2) 22 257 600 550 660 24 6 65 140 100 18 58 69 M20x40 6317 6317
315M(4-8) 22 257 600 550 660 24 6 80 170 100 22 71 85 M20x40 NU319 6319
315L(2) 22 257 600 550 660 24 6 65 140 100 18 58 69 M20x40 6317 6317
315L(4-8) 22 257 600 550 660 24 6 80 170 100 22 71 85 M20x40 NU319 6319
355M(2) 25 284 740 680 800 24 6 75 140 100 20 67.5 79.5 M20x40 6319 6319
355M(4-8) 25 284 740 680 800 24 6 95 170 130 25 85 99 M20x40 NU322 6322
355L(2) 25 284 740 680 800 24 6 75 140 100 20 67.5 79.5 M20x40 6319 6319
355L(4-8) 25 284 740 680 800 24 6 95 170 130 25 86 100 M20x40 NU322 6322
400L(4-8) 32 425 940 880 1000 28 6 110 210 130 28 90 106 M20x40 NU324 6324

Notes: 1. Dimensional data subject to change without notice. 4. Bearing numbers in brackets apply to 2 pole motors.
2. Lifting facilities provided on motors frame size D100 and larger. 5. **AS1359 Australian/British frame allocations available for 110kw 2 pole,
3. For tolerances see page 11. 75kw and 110kw 4 pole.

10 ten AUSTRALIA & NEW ZEALAND

OUTLINE DIMENSIONS SHEET
MONARCH GX CAST IRON 3 - PHASE SQUIRREL CAGE INDUCTION MOTORS FRAME 80 - 132 FOOT AND C FACE
TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE ROTOR

SHAFT DETAIL

OUTPUT kW FRAME A AA AB AC B BB C H HA HD K KK L
2P 4P 6P 8P SIZE
0.75/1.1 0.55/0.75 0.55 - 80 125 34 160 160 100 130 50 80 10 235 10 M25x1.5 300
1.5 1.1 0.75 - 90S 140 36 180 175 100 130 56 90 12 255 10 M25x1.5 355
2.2 1.5 1.1 - 90L 140 36 180 175 125 210 56 90 12 255 10 M25x1.5 385
3 2.2/3 1.5 0.75/1.1 100L 160 40 200 200 140 235 63 100 14 270 12 M32x1.5 430
4 4 2.2 1.5 112M 190 45 230 200 140 250 70 112 15 300 12 M32x1.5 465
5.5/7.5 5.5 3 2.2 132S 216 55 270 275 140 230 89 132 18 345 12 M32x1.5 510
- 7.5 4/5.5 3 132M 216 55 270 275 178 270 89 132 18 345 12 M32x1.5 550

FRAME SHAFT EXTENSION BEARINGS

SIZE M N P S T D E ED F G GA DH DE NDE
80 100 80 142 M6 3.0 19 40 22 6 15.5 21.5 M6x12 6204ZZ 6204ZZ
90S 115 95 148 M8 3.0 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
90L 115 95 148 M8 3.0 24 50 32 8 20 27 M8x16 6205ZZ 6205ZZ
100L 130 110 177 M8 3.5 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
112M 130 110 190 M8 3.5 28 60 40 8 24 31 M10x20 6206ZZ 6206ZZ
132S 165 130 200 M10 3.5 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ
132M 165 130 200 M10 3.5 38 80 56 10 33 41 M12x24 6208ZZ 6208ZZ

MONARCH GX CAST IRON SLIDE RAILS

SLIDE FRAME BT XA
AL AT AU AX AY AZ XB XD XE XF
RAIL SIZE min. max.
M0809 80 355 12 10 30 105 35 95 45 30 6 325 15
90 355 12 10 30 105 35 80 45 30 6 325 15
M1013 100 470 16 12 44 170 52 160 50 43 6 430 18
112 470 16 12 44 170 52 125 50 43 6 430 18
132 470 16 12 44 170 52 100 50 43 6 430 18
M1618 160 615 19 15 64 170 76 155 67 57 11 565 25
180 615 19 15 64 170 76 125 67 57 11 565 25
M2022 200 780 25 19 82 210 100 190 80 82 12 725 27
225 780 25 19 82 210 100 140 80 82 12 725 27
M2528 250 965 30 24 100 275 100 250 86 82 16 885 40
280 965 30 24 100 275 100 190 86 82 16 885 40
M3100 315 1215 40 38 125 380 123 330 110 95 20 1115 50

TOLERANCES
D F G&H K N S T
+ 0.009 +0 +0.360 +0.012 +0.430 +0
19≤D≤28 F=6 +0, -0.03 G=15.5 K=10 N=80 12≤S≤15 T=3
-0.004 -0.10 +0 +0.007 +0 -0.100
+0.018 +0 +0.430 +0.013 +0.520 +0
38≤D≤48 8≤F≤10 +0, -0.036 20≤G≤90 12≤K≤15 95≤N≤110 19≤S≤28 3.5≤T≤5
+0.002 -0.20 +0 +0.009 +0 -0.120
+0.030 +0 +0.520 +0.014 +0
55≤D≤80 12≤F≤18 +0, -0.043 80≤H≤250 19≤K≤28 130≤N≤180 T=6
+0.011 -0.5 +0 +0.011 -0.150
+0.035 +0 +0.620 +0.016
95≤D≤100 20≤F≤28 +0, -0.052 280≤H≤400 K=35 230≤N≤250
+0.013 -1.0 +0 +0.013

Notes: 1. Dimensional data subject to change without notice.

2. Lifting facilities provided on motors frame size D100 and larger.

AUSTRALIA & NEW ZEALAND eleven 11

 Cejehi
Cejehi

:h_l[i
:h_l[i
9edjhebi
9edjhebi
mmm$j[Ye$Yec$Wk
Some other products available from TECO Australia, Electric Motor Division -
Brake Motors, Crane Motors, Cooling Tower Motors, Eddy Current Motors, Hazardous Area Motors, High Efficiency Motors, High Voltage
Motors, Induction Generators, Invicta Vibrator Motors, Mill use Induction Motors, Multi-speed Motors, Slip Ring Motors, Smoke Spill Motors,
Synchronous Motors, Single Phase Motors, Special Application Motors, Vertical Hollow Shaft Motors, Variable Speed Drives, AC-DC Motor Controls

AUSTRALIA & NEW ZEALAND

Head Office, Sydney Melbourne Brisbane Perth New Zealand

TECO Australia Pty Ltd TECO Australia Pty Ltd TECO Australia Pty Ltd TECO Australia Pty Ltd TECO New Zealand Ltd
335-337 Woodpark Road, 16 Longstaff Road, 50 Murdoch Circuit, 18 Hazelhurst Street, Unit 3, 477 Great South Road,
Smithfield NSW 2164 Bayswater VIC 3153 Acacia Ridge QLD 4110 Kewdale WA 6105 Penrose, Auckland
Tel: 02 9765 8118 Tel: 03 9720 4411 Tel: 07 3373 9600 Tel: 08 9479 4879 Tel: 64 9-526 8480
Fax: 02 9604 9330 Fax: 03 9720 5355 Fax: 07 3373 9699 Fax: 08 9478 3876 Fax: 64 9-526 8484
sales@teco.co.nz

Distributed by:

www.teco.com.au emd@teco.com.au

The information in this catalogue is subject to change without notice.

MONCI-032015