0% found this document useful (0 votes)
545 views23 pages

Yamaha Subwoofer Service Guide

This document provides service information for the Yamaha YST-SW320 subwoofer system. It contains specifications, diagrams of the rear panel connections, procedures for disassembly, and instructions for testing leakage current. Technicians are warned to take safety precautions and follow Yamaha's procedures when servicing this product.

Uploaded by

Yuda Aditama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
545 views23 pages

Yamaha Subwoofer Service Guide

This document provides service information for the Yamaha YST-SW320 subwoofer system. It contains specifications, diagrams of the rear panel connections, procedures for disassembly, and instructions for testing leakage current. Technicians are warned to take safety precautions and follow Yamaha's procedures when servicing this product.

Uploaded by

Yuda Aditama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

YST-SW320

SUBWOOFER SYSTEM

YST-SW320 SERVICE MANUAL

IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA
Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry,
and more specifically YAMAHA Products, are already known and
understood by the users, and have therefore not been restated.

WARNING: Failure to follow appropriate service and safety


procedures when servicing this product may result in
personal injury, destruction of expensive components,
and failure of the product to perform as specified. For
these reasons, we advise all YAMAHA product owners
that any service required should be performed by an
authorized YAMAHA Retailer or the appointed service
representative.

IMPORTANT: The presentation or sale of this manual to any individual


or firm does not constitute authorization, certification
or recognition of any applicable technical
capabilities, or establish a principle-agent relationship
of any form.
The data provided is believed to be accurate and applicable to the unit(s)
indicated on the cover. The research, engineering, and service departments
of YAMAHA are continually striving to improve YAMAHA products.
Modifications are, therefore, inevitable and specifications are subject to
change without notice or obligation to retrofit. Should any discrepancy
appear to exist, please contact the distributor's Service Division.

WARNING: Static discharges can destroy expensive components.


Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss
in the unit (heavy gauge black wires connect to this
buss).
IMPORTANT: Turn the unit OFF during disassembly and part
replacement. Recheck all work before you apply power
to the unit.

■ CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . . . 1
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
DISASSEMBLY PROCEDURES . . . . . . . . . . . . . . . 3–4
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6
PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . . . 7–12
BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . . . . 14
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15–22
YST-SW320

100720
YST-SW320

■ TO SERVICE PERSONNEL
AC LEAKAGE
1. Critical Components Information WALL EQUIPMENT TESTER OR
Components having special characteristics are marked Z OUTLET UNDER TEST EQUIVALENT
and must be replaced with parts having specifications equal
to those originally installed.

2. Leakage Current Measurement (For 120V Models Only)


When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated INSULATING
from supply circuits. TABLE

● Meter impedance should be equivalent to 1500 ohm shunted ● Leakage current must not exceed 0.5mA.
by 0.15µF.
● Be sure to test for leakage with the AC plug in both
polarities.

WARNING: CHEMICAL CONTENT NOTICE!


The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or
plastic (where applicable) components may also contain traces of chemicals found by the California Health and
Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR
ANY REASON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes
or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands
before handling food.

■ SPECIFICATIONS
Type . . . . . . . . . Advanced Yamaha Active Servo Technology
Driver . . . . . . . . . . . 25 cm (9-13/16") cone woofer (JA25600)
Magnetically shielded type
Amplifier Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250W/5Ω
Frequency Response . . . . . . . 20 Hz to 160 Hz (-24 dB/oct.)
Power Supply
U, C models . . . . . . . . . . . . . . . . . . . . . . . . . AC120V, 60 Hz
A model . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC240V, 50 Hz
B, G models . . . . . . . . . . . . . . . . . . . . . . . . . AC230V, 50 Hz
R, T models . . . . . . . . . . . . AC110/120/220/240V, 50/60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60W
Dimensions (W x H x D) . . . . . . . . . . . . 340 x 432 x 370 mm
(13-3/8" x 17" x 14-9/16")
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 kg (37 lbs. 7 oz)
Finish
All model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black color
R, T, G models . . . . . . . . . . . . . . . . . . . . . . . . Cherry color
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . Nonskid pad x 4
* Specifications subject to change without notice.

U . . . . . . . . . . USA model
C . . . . . . Canadian model
A . . . . . Australian model
B . . . . . . . . British model
YST-SW320

G . . . . . European model
R . . . . . . . General model
T . . . . . . . . . China model

1
YST-SW320

■ REAR PANEL

R, T models only

▼ U, C models ▼ A model

▼ B, G models

▼ R model ▼ T model
YST-SW320

2
YST-SW320

■ DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)

1. Removal of Front Panel Ass'y 3. Removal of Rear Panel Ass'y


Remove 4 screws ( q ) and then remove the Front Remove 12 screws ( r ) in Fig. 3.
Panel Ass'y in Fig. 1. * Arrow marks ( ) are printed to identify the screws to be
* Use an Allen wrench (3mm) to unscrew the Front removed.
Panel Ass'y.

Rear Panel Ass'y

Front Panel Ass'y

r
q
r

r
q Main (5) P.C.B.

Fig. 3
Fig. 1

* When assembling the Rear Panel, check to ensure that


2. Removal of Loud Speaker the gasket is not damaged so as to prevent air leakage
a. Remove 8 screws ( w ) and then remove the Base from occurring.
Ass'y in Fig. 2.
b. Remove 4 screws ( e ) and then remove the Loud
Speaker in Fig. 2.

w
w w
● Installation of emblem
w Base Ass'y
1. Put the emblem into the cabinet at the specified posi-
tion.
2. Place a piece of cloth/wood on top of the emblem.
e
e 3. Using a mallet, hammer the emblem in place through
the cloth/wood.
* Use special care not to cause damage to the emblem or
cabinet while hammering the emblem.

Loud Speaker

Fig. 2
YST-SW320

3
YST-SW320

● Installation of power switch


Rapid cures bond (such as 5 minute epoxy) is required to fix the power switch.
As shown in Fig. A, apply rapid cures bond (such as 5 minute epoxy) to the power switch (the area which
contacts the rear panel), insert it in the rear panel and make sure it is fixed.
(Inserting the power switch in the rear panel only would not be sufficient for its secure installation.)

● Precaution for installation of power cord


After connecting the power cord, be sure to apply the rapid cures bond (such as 5 minute epoxy) to the
cord stopper as shown in Fig. A,

Bond application diagram (Fig. A)


Glue List
Place Name
Apply rapid cures bond Cord stopper 5 minute epoxy or
2051(Revertex Finewaters SDN.BHD.) or
VYLOK 917DH (National Starch &
Chemical (M) SDM.BHD.)
Power switch 5 minute epoxy or Diabond 1620B

Apply rapid cures bond

● Dimensions
370 (14-9/16") 22
8
340 (13-3/8") (5/16") 340 (13-3/8") (7/8")
340 (13-3/8")
432 (17")

YST-SW320

Units : mm (inch)

4
YST-SW320

■ ADJUSTMENTS
● Confirmation of Power Amp operation ● Idling Adjustment
For the power amplifier which has been repaired, it To stabilize operation of the amplifier, turn ON the
is absolutely necessary to confirm that a correct power with no input signal and wait for 1 or 2 minutes
waveform is obtained at points indicated by A and B in non loaded condition before the adjustment.
in the schematic diagram according to the following Adjust VR1 so that the voltage between terminals
procedure. TP11 and TP12 is DC 50mV to 250mV.

Devices required
Signal generator
8Ω or 6Ω load resistor
Oscilloscope (dual trace type)

Connection
1) Connect the output signal from the signal generator
to the input terminal of YST-SW320.
2) Disconnect the connector terminal connected to the ● Confirmation of AUTO STANDBY
speaker unit and reconnect it to the load resistor.
3) Connect the HOT side of the oscilloscope CH1 probe Measuring Condition Rating Remarks
to the point A or B indicated in the figure and the R60 = 1MΩ After 2 to 8 sec. VOLUME: MAX
GND side to the GND of the main unit.
➔1MΩ//10kΩ STANDBY HIGH CUT: MAX
4) Connect the oscilloscope CH2 input to the red side
of the connector cable, which is connected with the F = 100Hz (LED become red) AUTO STANDBY: LOW
load resistor. Input Level = 4mV Don't STANDBY VOLUME: MAX
At this time, the GND terminal of CH2 must be left Load = Open HIGH CUT: MAX
unconnected.
AUTO STANDBY: HIGH
Setting
1) Set the signal generator to the sine wave, 100Hz and
minimum output level settings.
2) Set the volume of YST-SW320 to the minimum
position.
3) Turn on the power to YST-SW320.
4) Adjust the output level of the signal generator and the
volume of YST-SW320 so that the output level
observed at oscilloscope CH2 is 28Vp-p.

Waveform observation
With the settings made as described above, observe
the waveform obtained at CH1 for judgment.

Normal Normal
Point A (Cathode of D29) Point B (Anode of D30)
V : 20V/div H : 2 msec/div V : 20V/div H : 2 msec/div
DC range 1 : 1 probe DC range 1 : 1 probe

0V
0V

Abnormal
+B or GND level Abnormal
YST-SW320

Becomes constant -B or GND level


Becomes constant

5
YST-SW320

● Schematic Diagram

RE
IDLING CURRENT ADJ.
WH

DC 50mV to 250mV

● Test Points
Point A Point B

D29 TP11 (+)


D30
DC 50mV to 250mV

VR1
TP12 (-)
YST-SW320

Main (1) P.C.B

6
A B C D E

YST-SW320

1 ■ PRINTED CIRCUIT BOARD (Foil side)

MAIN ( 1 ) P. C. B.

TO : MAIN (6)

W7

W6

W5
RE

RE
BL
2

+B1
–B1
3

E
FROM : MAIN (2)
Q16C

1
Q1C

4
A
Q17C

B
Q9
Q17A

5 IDLING CURRENT ADJ.


Q1A

IDLING TEST POINT


Q16A

DC 50mV to 250mV

6
FROM : MAIN (2)
DR+
OUT
DR–
AYST
+V1
WH
RE
W19

W20

TO : SPEAKER
7

7
A B C D E

YST-SW320

1 ■ PRINTED CIRCUIT BOARD (Foil side)

MAIN ( 2 ) P. C. B.

TO : MAIN (6)

W16

W15

W14
TO : MAIN (3)
2

BE

BE
BL

TO : MAIN (1)
#2
W2

3
VCC
VCC
E
E
PWS
+V1

#18
—B1
+B1
E

W18
FROM : MAIN (4)

AYST
DR—
OUT
DR+

+V1
MA1
E
TOVL

W17
+12
—12
LIM
#17

MA2
TO : MAIN (1)
FROM : MAIN (5)

9 1

9 1
TVOL
6 MAIN
E

+V2
+12
—12
PWS
VCC

8
7
6
5
4
3
2
1

9
A

YST-SW320

● R, T models

MAIN ( 3 ) P. C. B. MAIN ( 7 ) P. C. B.

FROM : MAIN (2)


B

+V1
PWS
E
E
VCC
VCC
FROM : MAIN (4) TO : VOLTAGE SELECTOR

GR
W11
BR
W10

SWL
SWH2
SWH1
SO
W9
BE

GY
8 1
C

W8
9 1 BL
RE
■ PRINTED CIRCUIT BOARD (Foil side)

OR

OR WH
W12

BE
GY
W13 RE
D

TO : VOLTAGE
TO : MAIN (8) SELECTOR

TO : POWER CORD TO : POWER


TRANSFORMER
E
7
6
5
4
3
2
1
A

● U, C, A, B, G models

MAIN ( 3 ) P. C. B. MAIN ( 7 ) P. C. B.

FROM : MAIN (4) FROM : MAIN (2)


B

+V1
PWS
E
E
VCC
VCC

SWL
SWH2
SWH1
SO
BE W9

8 1
WH W8
9 1
C

■ PRINTED CIRCUIT BOARD (Foil side)

OR
W12

GY
W13

FROM : POWER
CORD
D

TO : MAIN (8) TO : POWER


TRANSFORMER
YST-SW320

10
E
A B C D E

YST-SW320

1 ■ PRINTED CIRCUIT BOARD (Foil side)

MAIN ( 4 ) P. C. B.

#1
#4 W1
W4
TO : MAIN (2)
2 TO : MAIN (3) MA2
LIM

SWH2
SWH1
SWL –12
+12

SO
TOVL
E
MA1

8 1
1

3
9

R, T, B, G ONLY

BASS PHASE AUTO INPUT


STANDBY 2
4

+ R – – L +

OUTPUT
INPUT 1

MAIN ( 5 ) P. C. B.

VOLUME HIGH SATNDBY/


CUT ON

9 1
6
TOVL
E
MAIN
+V2
+12
–12
PWS
VCC

7
FROM : MAIN (2)

11
A B C D E

YST-SW320

1 ■ PRINTED CIRCUIT BOARD (Foil side)

MAIN ( 6 ) P. C. B.

FROM : POWER
2 TRANSFORMER

W7

W6

W5

W14

W15

W16
RE

RE

BE

BE
BL

BL
3 TO : MAIN (2)

TO : MAIN (1)

MAIN ( 8 ) P. C. B.

5
POWER
OR W12

GY W13

6
TO : MAIN (3)

12
7
6
5
4
3
2
1

13
A

+ VR3 +B
SW2 PRE DRIVE POWER DRIVE
PHASE VOLUME Q2—8, 10 Q9, 16A/C, 26A/C,
L Q1C, 17C, 24A
IC11A SELECT Q28, 29 PS AMP
3 IC11B IC1A B.P.F Q27, 31
1 6 4 IC7A Q33—36 RY1
– 7 2 6 IC7B
YST-SW320

5 3 + 8 4 IC1B –
2 + 2 6
INPUT 1 + 8
+
SPEAKER

L.P.F. L.P.F. H.P.F. Q1A, 17A, 24C
12dB/oct PS AMP
R 6dB/oct 12dB/oct BASS L.P.F. Q30, 32
SELECT 12dB/oct
+ SW4 –B

HIGH CUT A.N.I.C


VR2 IC8, 9
Q25
0.1
B

+ D12, 13, 19
■ BLOCK DIAGRAM

L
– LIMITER
Q18—21
D6, 14, 33, 34
OUTPUT
– 8

R PWR
4
D8
TIMER 3 IC3
+ R60
IC5 Q22, 23
6
PROTECTION
7
POWER SUPPLY
MUSIC
D1
L SENSOR C45
IC4 Q12 +B
INPUT 2
C

R
AUTO STANDBY AUTO POWER
SW3 ON/OFF CIRCUIT
H/L –B

POWER SUPPLY RY2


D2 F1
OFF
+12 IC6
POWER
SW5
REGULATOR

–12 IC10

Q11
D

SUB
POWER SUPPLY
R, T ONLY D11
T1
REGULATOR REGULATOR
PWR IC12 Q13, 14
STANDBY/ON D15
D9 D17
SW1

D18
Q15
E
A B C D E F G H I J K

YST-SW320

■ SCHEMATIC DIAGRAM
1

B.P.F. L.P.F. -11.9


0

2.7 3.4 0
PRE DRIVE POWER DRIVE 63.0 62.6 PS AMP
5.9
0 63.1
62.9 63.1 63.1 63.1
11.8
3.4 -0.1
0 63.1
0 0 0.6 0 62.4 4.2 62.7
62.4
62.7
63.1 A IC1, 4, 7—9 : µPC4570HA
62.1 62.1
2.6 Dual OP-Amp
4.2
0 3.6 62.6
61.6 61.6 61.6
0 3.6
1.7 1.7
-0.1 0.7
3.2
2.6 0 B
L.P.F. 0
1.1 1.1
2.6
63.1 –
1
+ +
2

2 0
1.7
0.6

1 2 3 4 5 6 7 8 9
0 0.6 62.4
0 -1.0 0 VCC VO1 –Vm1 +Vm1 VEE +Vm2 –Vm2 VO2 VCC
0 62.4
0 0
0
-11.9 -1.6 0
11.8 LIMITER 0.7
0
0 0.2

IDLING CURRENT ADJ. IC11 : NJM4558L


0 0 0
-61.8 -61.8 Dual OP-Amp
-0.5
0 0.1
0
DC 50mV to 250mV + +
-11.9 11.8 -3.6
-0.5 – –
0.1 0.1
-2.6
-1.0 -1.0 -2.7
0 0
-61.8
-61.9 -3.2 -2.7 0
-1.6 -1.6 1 2 3 4 5 6 7 8
-61.4

–IN1

–IN2
–VCC

+VCC
+IN1

+IN2

OUT2
OUT1
-62.8 -62.3
0 0 -61.8
-61.9 -3.6
-62.5 -61.4 -2.6
3 0 0
-62.5 -4.2 -62.3
-63.4 -63.4
-62.8
-61.4 -63.1
-62.8 -62.8

-62.8
0
-62.8 62.8
0 -62.9
0 1.8
0.6
0

POWER SUPPLY

3.3
0
0.7
0
2.0
0
0
0
0 IC3 : µPC1237HA
7.3 Protector IC for Power Amplifier
PROTECTION
H.P.F. 11.8
L.P.F. 7.9 -62.8 63.1
7
Vcc
8
-11.9
0 6.0
0 24.3 0.7 Relay
0 1 Overload Vcc on drive 6
0 0 0 detect mute circuit
0 6.6 Flip flop
circuit
4 2
Mid-point
potential AC OFF
detect
detect

Latch / automatic
return select
A.N.I.C
5 3 4
0
GND
11.8 -0.3 -1.5
0 0 0
0 11.8
0 0
0 0 0
0 -0.3
0
0 0
-11.9 -11.9 0

AC 97.6V

5 POWER SUPPLY
0 16.4 11.8

0
AC 25.9V -16.4 16.4 6.0

0
6.6
0

-16.4 -11.9

11.5 7.9

0 IC5 : M51848L
CR Timer
AUTO POWER ON/OFF
SUB CIRCUIT R R R

0
1.3
6.6
7.9
5.3
7.5
7.5
7.9

+
POWER SUPPLY 11.5
7.9

+
FLIP-
FLOP

0
AC 11.2V 6.7
5.6 7.5
6.6
3.9 1 2 3 4 5 6 7 8
7 0

REFERENCE
VOLTAGE

THRESHOLD

DISCHARGE

VCC
GND

OUT
TRIGGER

RESET
0 0.9 1.3
11.5 3.9
0
0.7 0
0
5.6

PIN CONNECTION DIAGRAM OF TRANSISTORS, DIODES AND ICS.

8 1SS133 S1NB20 RBV-602 2SA970 (GR, BL) 2SC1846S 2SA1837 2SA1492Z (O, P, Y) 2SK304 (E, T) NJM78L08A NJM78M12FA NJM79M12FA NJM4558L µPC4570HA
S2L20U 2SA1015 (Y) 2SC4793 2SC3856Z (O, P, Y) µPC1237HA
1SR139-400 2SA1145 (O, Y) 2SC4688 (R, O) M51848L
MTZJ3.6B 2SC1815 (Y, GR)
MTZJ12.0C 2SC2240 (GR, BL)
MTZJ24.0B 2SC2705 (O, Y)
2SC2878 (A, B)
Anode * All voltage are measured with a 10MΩ/V DC electric volt meter.
1:OUTPUT 1: OUTPUT 1:COMMON
8 9 * Components having special characteristics are marked Z and
– – D 2:COMMON 1 2: COMMON 2:INPUT must be replaced with parts having specifications equal to those
E 3:INPUT 2 3 3: INPUT 32 3:OUTPUT 32
Cathode C EC B B G
+ + B B CE C
E
S 1 1 1
1 originally installed.
* Schematic diagram is subject to change without notice.

14
YST-SW320

■ WARNING

PARTS LIST Components having special characteristics are marked Z and must be
replaced with parts having specifications equal to those originally installed.
● Carbon resistors (1/6W or 1/4W) are not included in the ELECTRICAL PARTS
■ ELECTRICAL PARTS List. For the part Nos. of the carbon resistors refer to the last page.

ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS :

C.A.EL.CHP : CHIP ALUMI. ELECTROLYTIC CAP L.EMIT : LIGHT EMITTING MODULE


C.CE : CERAMIC CAP LED.DSPLY : LED DISPLAY
C.CE.ARRAY : CERAMIC CAP ARRAY LED.INFRD : LED, INFRARED
C.CE.CHP : CHIP CERAMIC CAP MODUL.RF : MODULATOR, RF
C.CE.ML : MULTILAYER CERAMIC CAP PHOT.CPL : PHOTO COUPLER
C.CE.M.CHP : CHIP MULTILAYER CERAMIC CAP PHOT.INTR : PHOTO INTERRUPTER
C.CE.SAFTY : RECOGNIZED CERAMIC CAP PHOT.RFLCT : PHOTO REFLECTOR
C.CE.TUBLR : CERAMIC TUBULAR CAP PIN.TEST : PIN, TEST POINT
C.CE.SMI : SEMI CONDUCTIVE CERAMIC CAP PLST.RIVET : PLASTIC RIVET
C.EL : ELECTROLYTIC CAP R.ARRAY : RESISTOR ARRAY
C.MICA : MICA CAP R.CAR : CARBON RESISTOR
C.ML.FLM : MULTILAYER FILM CAP R.CAR.CHP : CHIP RESISTOR
C.MP : METALLIZED PAPER CAP R.CAR.FP : FLAME PROOF CARBON RESISTOR
C.MYLAR : MYLAR FILM CAP R.FUS : FUSABLE RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.FLM : METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.POLY : POLYETHYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.PP : POLYPROPYLENE FILM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL : TANTALUM CAP R.TW.CEM : TWIN CEMENT FIXED RESISTOR
C.TNTL.CHP : CHIP TANTALUM CAP R.WW : WIRE WOUND RESISTOR
C.TRIM : TRIMMER CAP SCR.BND.HD : BIND HEAD B-TITE SCREW
CN : CONNECTOR SCR.BW.HD : BW HEAD TAPPING SCREW
CN.BS.PIN : CONNECTOR, BASE PIN SCR.CUP : CUP TITE SCREW
CN.CANNON : CONNECTOR, CANNON SCR.TERM : SCREW TERMINAL
CN.DIN : CONNECTOR, DIN SCR.TR : SCREW, TRANSISTOR
CN.FLAT : CONNECTOR, FLAT CABLE SUPRT.PCB : SUPPORT, P.C.B.
CN.POST : CONNECTOR, BASE POST SURG.PRTCT : SURGE PROTECTOR
COIL.MX.AM : COIL, AM MIX SW.TACT : TACT SWITCH
COIL.AT.FM : COIL, FM ANTENNA SW.LEAF : LEAF SWITCH
COIL.DT.FM : COIL, FM DETECT SW.LEVER : LEVER SWITCH
COIL.MX.FM : COIL, FM MIX SW.MICRO : MICRO SWITCH
COIL.OUTPT : OUTPUT COIL SW.PUSH : PUSH SWITCH
DIOD.ARRAY : DIODE ARRAY SW.RT.ENC : ROTARY ENCODER
DIODE.BRG : DIODE BRIDGE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.CHP : CHIP DIODE SW.RT : ROTARY SWITCH
DIODE.VAR : VARACTOR DIODE SW.SLIDE : SLIDE SWITCH
DIOD.Z.CHP : CHIP ZENER DIODE TERM.SP : SPEAKER TERMINAL
DIODE.ZENR : ZENER DIODE TERM.WRAP : WRAPPING TERMINAL
DSCR.CE : CERAMIC DISCRIMINATOR THRMST.CHP : CHIP THERMISTOR
FER.BEAD : FERRITE BEADS TR.CHP : CHIP TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT : DIGITAL TRANSISTOR
FET.CHP : CHIP FET TR.DGT.CHP : CHIP DIGITAL TRANSISTOR
FL.DSPLY : FLUORESCENT DISPLAY TRANS : TRANSFORMER
FLTR.CE : CERAMIC FILTER TRANS.PULS : PULSE TRANSFORMER
FLTR.COMB : COMB FILTER MODULE TRANS.PWR : POWER TRANSFORMER ASS’y
FLTR.LC.RF : LC FILTER ,EMI TUNER.AM : TUNER PACK, AM
GND.MTL : GROUND PLATE TUNER.FM : TUNER PACK, FM
GND.TERM : GROUND TERMINAL TUNER.PK : FRONT-END TUNER PACK
HOLDER.FUS : FUSE HOLDER VR : ROTARY POTENTIOMETER
IC.PRTCT : IC PROTECTOR VR.MTR : POTENTIOMETER WITH MOTOR
JUMPER.CN : JUMPER CONNECTOR VR.SW : POTENTIOMETER WITH ROTARY SW
JUMPER.TST : JUMPER, TEST POINT VR.SLIDE : SLIDE POTENTIOMETER
L.DTCT : LIGHT DETECTING MODULE VR.TRIM : TRIMMER POTENTIOMETER
YST-SW320

Note) Those parts marked with “#” are not included in the P.C.B. ass'y.

15
YST-SW320

P.C.B. MAIN

Schm Schm
Ref. PART NO. Description Ref. PART NO. Description
* V5057600 P.C.B. MAIN(UC) C39 FG212120 C.CE 120pF 50V
* V5057700 P.C.B. MAIN(RT) C40 VF606700 C.EL 1000uF 25V(BG)
* V5057800 P.C.B. MAIN(A) C40 VF606700 C.EL 1000uF 25V(UCABG)
* V5057900 P.C.B. MAIN(BG) C40 VH620500 C.EL 10uF 25V(RT)
CB1 VB858600 CN.BS.PIN 7P C41 UA654470 C.MYLAR 0.047uF 50V
CB2 VD004900 CN.BS.PIN 6P C42 FG214100 C.CE 0.01uF 50V
CB3 VB858700 CN.BS.PIN 8P C43 FG213100 C.CE 1000pF 50V
CB4 VD004700 CN.BS.PIN 4P C44 VJ839100 C.EL 1uF 50V
CB5 VT658200 HOLDER.FUS PC-FH1(RT) C45 UA654680 C.MYLAR 0.068uF 50V
CB6 VT658200 HOLDER.FUS PC-FH1(RT) C46 UJ638330 C.EL 330uF 16V
CB7 VT658200 HOLDER.FUS PC-FH1 C47 UJ648220 C.EL 220uF 25V
CB8 VT658200 HOLDER.FUS PC-FH1 * C48 VT726600 C.EL 470uF 63V(RT)
CB9 VB858700 CN.BS.PIN 8P C49 VS741700 C.CE.SAFTY 0.01uF 275V
CB17 VD004800 CN.BS.PIN 5P C50 FG214100 C.CE 0.01uF 50V
CB18 VL844700 CN.BS.PIN 3P C51 UA654470 C.MYLAR 0.047uF 50V
C1 VT857900 C.POL 0.1uF 250V C52 VJ836900 C.EL 10uF 16V
C2 VJ837200 C.EL 47uF 16V C53 VJ836900 C.EL 10uF 16V
C3 VJ837200 C.EL 47uF 16V C54 FG212120 C.CE 120pF 50V
* C4 VT727600 C.EL 10uF 100V C55 FG251220 C.CE 22pF 50V
C5 VK534000 C.PP 220pF 200V C56 VT728200 C.EL 330uF 100V
C6 VE117600 C.EL 220uF 10V C57 UA655100 C.MYLAR 0.1uF 50V
C7 UA655100 C.MYLAR 0.1uF 50V C58 UA654220 C.MYLAR 0.022uF 50V
C8 UA655470 C.MYLAR 0.47uF 50V C59 UA654220 C.MYLAR 0.022uF 50V
C9 UA655820 C.MYLAR 0.82uF 50V * C60 VT728200 C.EL 330uF 100V
C10 UA655470 C.MYLAR 0.47uF 50V C61 UA655820 C.MYLAR 0.82uF 50V
C11 UA655220 C.MYLAR 0.22uF 50V C62 UA655220 C.MYLAR 0.22uF 50V
C12 Ui377470 C.EL 47uF 63V C63 UA655220 C.MYLAR 0.22uF 50V
C13 Ui377470 C.EL 47uF 63V C64 UA655220 C.MYLAR 0.22uF 50V
C14 VJ836900 C.EL 10uF 16V C65 UM417100 C.EL 10uF 50V
C15 VK534000 C.PP 220pF 200V C66 UM417100 C.EL 10uF 50V
C16 VT857900 C.POL 0.1uF 250V C67 FG212220 C.CE 220pF 50V
C17 UA655820 C.MYLAR 0.82uF 50V C68 VJ836900 C.EL 10uF 16V
* C18 V6092500 C.EL 8200uF 80V C69 UA654390 C.MYLAR 0.039uF 50V
* C19 V6092500 C.EL 8200uF 80V C70 VJ836900 C.EL 10uF 16V
C20 UJ648470 C.EL 470uF 25V C71 FG212220 C.CE 220pF 50V
C21 UJ648470 C.EL 470uF 25V C72 VF964800 C.EL 100uF 16V
C22 VF964800 C.EL 100uF 16V C73 VF964800 C.EL 100uF 16V
C23 VF964800 C.EL 100uF 16V C74 VJ836900 C.EL 10uF 16V
C24 VF760000 C.EL 100uF 10V C75 VJ836900 C.EL 10uF 16V
C25 VF964800 C.EL 100uF 16V C76 UA654820 C.MYLAR 0.082uF 50V
C26 UA653100 C.MYLAR 1000pF 50V C77 UA654390 C.MYLAR 0.039uF 50V
C27 VT727600 C.EL 10uF 100V C78 Vi531900 C.EL 47uF 10V
C28 UA655220 C.MYLAR 0.22uF 50V C79 VA777700 C.CE 220pF 50V
C29 UA655100 C.MYLAR 0.1uF 50V C79 VA777700 C.CE 220pF 50V(RTBG)
C30 UA655100 C.MYLAR 0.1uF 50V C80 VA761000 C.CE 22pF 50V
C31 UA654100 C.MYLAR 0.01uF 50V C80 VA761000 C.CE 22pF 50V(RTBG)
C32 UA654100 C.MYLAR 0.01uF 50V C81 UA655390 C.MYLAR 0.39uF 50V
C33 UA654270 C.MYLAR 0.027uF 50V C82 UA655220 C.MYLAR 0.22uF 50V
C34 VJ836900 C.EL 10uF 16V C83 FG214100 C.CE 0.01uF 50V
C35 V5058000 C.MYLAR 4.7uF 250V Z D1 Vi234100 DIODE.BRG RBV-602
C36 V5058000 C.MYLAR 4.7uF 250V Z D2 VR253700 DIODE.BRG S1NB20 1.0A 200V
YST-SW320

C37 UA654470 C.MYLAR 0.047uF 50V D3 iF004600 DIODE 1SS133


C38 FG251220 C.CE 22pF 50V D4 iF004600 DIODE 1SS133

* New Parts * New Parts


16
YST-SW320

P.C.B. MAIN

Schm Schm
Ref. PART NO. Description Ref. PART NO. Description
D5 iF004600 DIODE 1SS133 Q4 iA097000 TR 2SA970 GR,BL
D6 iF004600 DIODE 1SS133 Q5 iC1815M0 TR 2SC1815 Y,GR
D7 VG442500 DIODE.ZENR MTZJ24B 24V Q6 iA101590 TR 2SA1015 O,Y
D8 iF004600 DIODE 1SS133 Q7 iA097000 TR 2SA970 GR,BL
D9 iF004600 DIODE 1SS133 Q8 VE198700 TR 2SA1145 O,Y
D10 iF004600 DIODE 1SS133 # Q9 VC398100 TR 2SC1846 S
Z D11 VR253700 DIODE.BRG S1NB20 1.0A 200V Q10 VE198800 TR 2SC2705 O,Y
D12 iF004600 DIODE 1SS133 Q11 iC224030 TR 2SC2240 GR,BL
D13 iF004600 DIODE 1SS133 Q12 iC224030 TR 2SC2240 GR,BL
D14 iF004600 DIODE 1SS133 Q13 iC224030 TR 2SC2240 GR,BL(RT)
D15 VU264100 DIODE 1SR139-400 Q14 VK801200 TR 2SC4688 R,O(RT)
D16 VG440300 DIODE.ZENR MTZJ12C 12V(RT) Q15 iC224030 TR 2SC2240 GR,BL
D17 iF004600 DIODE 1SS133 # Q16 iX606460 TR A1492Z/C3856Z O,P,Y
D18 VS079300 LED SPR-39MVW Q18 iC1815M0 TR 2SC1815 Y,GR
D19 iF004600 DIODE 1SS133 Q19 iA101590 TR 2SA1015 O,Y
D20 VG436400 DIODE.ZENR MTZJ3.6B 3.6V Q20 iC224030 TR 2SC2240 GR,BL
D21 VU264100 DIODE 1SR139-400 Q21 iA097000 TR 2SA970 GR,BL
D22 VG436400 DIODE.ZENR MTZJ3.6B 3.6V Q22 iA097000 TR 2SA970 GR,BL
D23 VU264100 DIODE 1SR139-400 Q23 iC224030 TR 2SC2240 GR,BL
D24 VU264100 DIODE 1SR139-400 Q24 iX632610 TR A1837/C4793 O,Y
D25 VU264100 DIODE 1SR139-400 Q25 V3028000 FET 2SK304 E
D26 VU264100 DIODE 1SR139-400 Q26 iX632610 TR A1837/C4793 O,Y
D27 iF004600 DIODE 1SS133 Q27 VE198800 TR 2SC2705 O,Y
D28 VP779200 DIODE S2L20U Q28 VE198800 TR 2SC2705 O,Y
D29 VP779200 DIODE S2L20U Q29 VE198700 TR 2SA1145 O,Y
D30 VP779200 DIODE S2L20U Q30 VE198700 TR 2SA1145 O,Y
D31 VP779200 DIODE S2L20U Q31 iA097000 TR 2SA970 GR,BL
D32 iF004600 DIODE 1SS133 Q32 iC224030 TR 2SC2240 GR,BL
D33 iF004600 DIODE 1SS133 Q33 iA097000 TR 2SA970 GR,BL
D34 iF004600 DIODE 1SS133 Q34 iA097000 TR 2SA970 GR,BL
Z F1 KB001660 FUSE T1.6A 250V(ABG) Q35 iC287820 TR 2SC2878 A,B
Z F1 KB001660 FUSE T1.6A 250V(BG) Q36 iC287820 TR 2SC2878 A,B
Z F1 V5279400 FUSE 6A 250V(RT) R2 HV455470 R.CAR.FP 470Ω 1/4W
Z F1 V5279400 FUSE 6A 250V(UCRT) R3 HV455470 R.CAR.FP 470Ω 1/4W
Z F2 KB001660 FUSE T1.6A 250V(RT) R4 HL236180 R.MTL.OXD 1.8KΩ 3W
IC1 XB247301 IC uPC4570HA R10 HU597100 R.MTL.FLM 10KΩ 1/4W
IC3 XF663A00 IC uPC1237HA R11 HU597100 R.MTL.FLM 10KΩ 1/4W
IC4 XB247301 IC uPC4570HA R12 HU597100 R.MTL.FLM 10KΩ 1/4W
IC5 XP741A00 IC M51848L R16 HV453470 R.CAR.FP 4.7Ω 1/4W
IC6 XJ602A00 IC NJM78M12FA R17 VG730500 R.MTL.OXD 0.15Ω 3W
IC7 XB247301 IC uPC4570HA R18 VG730500 R.MTL.OXD 0.15Ω 3W
IC8 XB247301 IC uPC4570HA R19 HV455470 R.CAR.FP 470Ω 1/4W
IC9 XB247301 IC uPC4570HA R20 HV453470 R.CAR.FP 4.7Ω 1/4W
IC10 XD343A00 IC NJM79M12FA R23 HV455330 R.CAR.FP 330Ω 1/4W
IC11 XM922A00 IC NJM4558L R27 HV453100 R.CAR.FP 1Ω 1/4W
IC12 iG160100 IC NJM78L08A 8V R28 HV453100 R.CAR.FP 1Ω 1/4W
L1 V5058100 COIL 120uH R31 HU576390 R.MTL.FLM 3.9KΩ 1/4W
L2 V5058100 COIL 120uH R32 HV454220 R.CAR.FP 22Ω 1/4W
L3 VR906600 COIL 0.95uH R33 HV455220 R.CAR.FP 220Ω 1/4W
* PJ1 V6415800 JACK,PIN 2P RJ-1060-01-0500 R39 HU578100 R.MTL.FLM 100KΩ 1/4W
# Q1 iX632610 TR A1837/C4793 O,Y R40 HV455220 R.CAR.FP 220Ω 1/4W
YST-SW320

Q2 iC1815M0 TR 2SC1815 Y,GR R41 HV454330 R.CAR.FP 33Ω 1/4W


Q3 iA097000 TR 2SA970 GR,BL R44 HV756390 R.CAR.FP 3.9KΩ 1/4W

* New Parts * New Parts


17
YST-SW320

P.C.B. MAIN

Schm Schm
Ref. PART NO. Description Ref. PART NO. Description
R45 HV456120 R.CAR.FP 1.2KΩ 1/4W * V6406300 HOLDER.LED LE56217-0A
* R46 V6022600 R.WW 0.1Ω 3W
R47 HV453100 R.CAR.FP 1Ω 1/4W
R48 HV453100 R.CAR.FP 1Ω 1/4W
R62 HV453220 R.CAR.FP 2.2Ω 1/4W(BG)
R62 HV453220 R.CAR.FP 2.2Ω 1/4W(UCABG)
R66 HL213100 R.MTL.OXD 1Ω 1W
R67 HL213100 R.MTL.OXD 1Ω 1W
R68 HV455120 R.CAR.FP 120Ω 1/4W
R69 HV456330 R.CAR.FP 3.3KΩ 1/4W
R79 HV455680 R.CAR.FP 680Ω 1/4W
R80 HV455150 R.CAR.FP 150Ω 1/4W
R81 HV456220 R.CAR.FP 2.2KΩ 1/4W
R82 HV456220 R.CAR.FP 2.2KΩ 1/4W
R86 HV456470 R.CAR.FP 4.7KΩ 1/4W
R87 HV456470 R.CAR.FP 4.7KΩ 1/4W
R105 HV454100 R.CAR.FP 10Ω 1/4W
R113 VH007900 R.MTL.FLM 20KΩ 1/4W
R115 HV454220 R.CAR.FP 22Ω 1/4W
R117 HV454220 R.CAR.FP 22Ω 1/4W
R121 HV454220 R.CAR.FP 22Ω 1/4W
R122 HV454220 R.CAR.FP 22Ω 1/4W
R125 HV453220 R.CAR.FP 2.2Ω 1/4W
R128 HV453470 R.CAR.FP 4.7Ω 1/4W
R129 HV453470 R.CAR.FP 4.7Ω 1/4W
R130 HV453470 R.CAR.FP 4.7Ω 1/4W
R132 HV453220 R.CAR.FP 2.2Ω 1/4W
R135 HV455560 R.CAR.FP 560Ω 1/4W
R152 HV455470 R.CAR.FP 470Ω 1/4W
Z RY1 VU161600 RELAY DC OSA-SS-224DM3
Z RY2 VU349800 RELAY DC SDT-SS-112DM
ST1 BB071360 SCR.TERM 8.3x13
SW1 VS066500 SW.PUSH SPPH13-W
SW2 V5178000 SW.SLIDE SSSF12-P06NO
SW3 V5178100 SW.SLIDE SSSU123-S09NO
SW4 V5178000 SW.SLIDE SSSF12-P06NO
Z T1 XV443A00 TRANS.PWR (UC)
Z T1 XV444A00 TRANS.PWR (RT)
Z T1 XV445A00 TRANS.PWR (ABG)
Z T1 XV445A00 TRANS.PWR (BG)
TE1 VT658100 TERM.WRAP 352-TX119
TE2 VT658100 TERM.WRAP 352-TX119
TE3 V4811400 TERM.SP 8P(BG)
TE3 VV003100 TERM.SP 8P(RT)
TE3 VV003100 TERM.SP 8P(UCRTA)
TP11 VT969000 PIN.TEST IRS-2049
TP12 VT969000 PIN.TEST IRS-2049
VR1 VJ692800 VR.TRIM B470Ω
VR2 VV954800 VR 10KΩ
VR3 VV954700 VR A5KΩ
BB070700 GND.MTL
YST-SW320

VN774800 GND.WSHR MEP1866 #11102


* V6383100 ASSY,CABLE 2P 420MM RE/WH

* New Parts * New Parts


18
A B C D E

YST-SW320

1 ■ EXPLODED VIEW

32 32
5-37 5-33
5-15
5-17 5-19
5-16
5-31

5-37

5-18
5-35
5-1-1
5-32
(4)
2 5-11
5-34
5-20
5-1-1 (1) 5-31
5-18 5-14

5-34

5-24 32
5-36 5-31

5-5
5-1-1 (6) 5-1-1 5-6
5-1-11 5-17 5-8
(8)
5-1-1 (2)
5-1-1 (1) 5-12
34
3 5-21
1-8

5-34 1

5-1-1 (3)
5-22

5-34 21
1-7

1-12
R, T models
4-15
5-1-5 5-1-7 5-1-4 5-1-1 (5)
5-38

5-1-13

4
1-12

5-1-6 5-31
1-12 5-11
5-1-12 5-1-8 1-12
5-1-12 5-23
4-15
33
1-12
1-12

4-6
5-9 4-11
4-1

4-12 33
5 11-1 27
26 1-11
27

34
12-1

2
34 12-10
34 12-10
12-1
35
35
6 27
11-2
12-10
35
12-1

Accessories

11-10 11-10
12-10

11-10 35 32 32
11-10

19
YST-SW320

■ MECHANICAL PARTS

Ref.
No. PART NO. Description Remarks Markets
* 1 V6182200 CABINET ASS’Y CH
* 1 V5866400 CABINET ASS’Y BL
* 1-7 V5859600 FRONT COVER
* 1-8 V5859700 GASKET
1-11 CB070450 BINDING TIE L=100
1-12 V5195800 FLANGE NUT B M6X15.5 MFZN2
* 2 XY889A00 LOUD SPEAKER 25cm 6Ω
* 4-1 V5860400 FRONT PANEL
* 4-6 V5860800 SHIELD SHEET
* 4-11 V5860900 SWITCH KNOB
* 4-12 V5861200 VOLUME KNOB
4-15 EP600280 BIND HEAD P-TITE SCREW 3x8 ZMC2-Y
* 5-1-1 V5057900 P.C.B. ASS’Y MAIN (BG)
* 5-1-1 V5057700 P.C.B. ASS’Y MAIN (RT)
* 5-1-1 V5057800 P.C.B. ASS’Y MAIN (A)
* 5-1-1 V5057600 P.C.B. ASS’Y MAIN (UC)
5-1-4 V5195000 HEAT SINK
# 5-1-5 iX606460 PAIR TRANSISTOR A1492Z/C3856Z O,P,Y Q16A,Q16C
# 5-1-6 VC398100 TRANSISTOR 2SC1846 S Q9
5-1-7 VK195900 SHEET 19x24
# 5-1-8 iX632610 PAIR TRANSISTOR A1837/C4793 O,Y Q1A,Q1C
5-1-11 VT669300 PW HEAD B-TITE SCREW 3x8-8 MFC2
5-1-12 Ei330086 BIND HEAD B-TITE SCREW 3x8 FCRM3-BL
5-1-13 VK173200 SCREW, TRANSISTOR 3x15 SP FCM3
Z* 5-5 XY291B00 POWER TRANSFORMER (A)
Z* 5-5 XY292B00 POWER TRANSFORMER (BG)
Z* 5-5 XY290B00 POWER TRANSFORMER (RT)
Z* 5-5 XY289B00 POWER TRANSFORMER (UC)
Z 5-6 V3756200 POWER CORD 10A SPT-2 2.1m (UC)
Z 5-6 VQ790000 POWER CORD 5A 2.0m (B)
Z 5-6 VT666200 POWER CORD ASS’Y (A)
Z 5-6 VZ555600 POWER CORD 10A 250V 2.0m (RT)
Z 5-6 VE371200 POWER CORD 2.5A 250V 2.0m (G)
5-8 VT665900 CORD STOPPER SR-4K-4
5-9 CB069250 BINDING TIE BK-1
* 5-11 V5194200 REAR PANEL (UC)
* 5-11 V5194300 REAR PANEL (RT)
* 5-11 V5194400 REAR PANEL (A)
* 5-11 V5194500 REAR PANEL (G)
5-12 VY840200 PLATE D
Z* 5-14 V5520700 ROCKER SWITCH JW-M11RKK UCS TV-5
* 5-15 V5195200 COVER
* 5-16 V5860000 GASKET
* 5-17 V5860100 GASKET
* 5-18 V5860200 GASKET
* 5-19 V5195100 HEAT SINK 20BS220-L85-K
5-20 VS755300 BUSH, B
* 5-21 V5194600 SUPPORT,PCB L
* 5-22 V6436000 SUPPORT,PCB
5-23 VS498200 GASKET F (RT)
* 5-24 V6486500 MOUNTING PLATE
YST-SW320

5-31 Ei330086 BIND HEAD B-TITE SCREW 3x8 FCRM3-BL


5-32 Ei340086 BIND HEAD TAPPING SCREW 4x8 FCRM3-BL

* New Parts
20
YST-SW320

Ref.
No. PART NO. Description Remarks Markets
5-33 EX601360 BIND HEAD P-TITE SCREW 3x10 FCRM3-BL
5-34 VT669300 PW HEAD B-TITE SCREW 3x8-8 MFC2
5-35 EX601890 BIND HEAD BONDING SCREW 3x6 FCRM3-BL
5-36 EK396010 BIND HEAD S-TITE SCREW 4x8 FCRM3-BL
5-37 EP640170 SEMS BIND HEAD P-TITE SCREW 4x12 MFC2-BL
5-38 ED330086 BIND HEAD SCREW 3x8 FCRM3-BL (RT)
* 11-1 V5858600 BASE
* 11-2 V5836700 REFLECTOR
11-10 V5858900 FLAT HEAD TAPPING SCREW #1 4.0x14
* 12-1 V5859900 LEG
12-10 03763040 FLANGE NUT D 6.0X13 MFZN2Y
21 VS755300 BUSH, B
26 V2729700 EMBLEM A
* 27 V5881400 SPACER
32 Ei340256 BIND HEAD TAPPING SCREW 4x25 ZMC2-BL
* 33 V6018100 HEXAGON SOCKET TAPPING SCREW 4x16 MFCR33
34 VB131900 BIND HEAD SCREW 6x25 MFZN2-BL
35 V5861300 BIND HEAD SCREW 6x50

ACCESSORIES
VV257100 LEG x4

YST-SW320

* New Parts
21
YST-SW320

Parts List for Carbon Resistors


Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No.
1.0 Ω HJ35 3100 HF85 3100 10 kΩ HF45 7100 HF45 7100
1.8 Ω HJ35 3180 ❊ 11 kΩ HF45 7110 HF45 7110
2.2 Ω HJ35 3220 HF85 3220 12 kΩ HJ35 7120 HF85 7120
3.3 Ω HJ35 3330 HF85 3330 13 kΩ HF45 7130 HF45 7130
4.7 Ω HJ35 3470 HF85 3470 15 kΩ HF45 7150 HF45 7150
5.6 Ω HJ35 3560 HF85 3560 18 kΩ HF45 7180 HF45 7180
10 Ω HF45 4100 HF45 4100 22 kΩ HF45 7220 HF45 7220
15 Ω HJ35 4150 HF85 4150 24 kΩ HF45 7240 HF45 7240
22 Ω HF45 4220 HF45 4220 27 kΩ HJ35 7270 HF85 7270
27 Ω HJ35 4270 HF85 4270 30 kΩ HF45 7300 HF45 7300
33 Ω HF45 4330 HF45 4330 33 kΩ HF45 7330 HF45 7330
39 Ω HJ35 4470 HF85 4390 36 kΩ HF45 7360 HF45 7360
47 Ω HF45 4470 HF45 4470 39 kΩ HF45 7390 HF45 7390
56 Ω HF45 4560 HF45 4560 47 kΩ HF45 7470 HF45 7470
68 Ω HF45 4680 HF45 4680 51 kΩ HF45 7510 HF45 7510
75 Ω HF45 4750 HF45 4750 56 kΩ HF45 7560 HF45 7560
82 Ω HF45 4820 HF45 4820 62 kΩ HF45 7620 HF45 7620
91 Ω HF45 4910 HF45 4910 68 kΩ HF45 7680 HF45 7680
100 Ω HF45 5100 HF45 5100 82 kΩ HF45 7820 HF45 7820
110 Ω HJ35 5110 HF85 5110 91 kΩ HF45 7910 HF45 7910
120 Ω HF45 5120 HF45 5120 100 kΩ HF45 8100 HF45 8100
150 Ω HF45 5150 HF45 5150 110 kΩ HF45 8110 HF45 8110
160 Ω HJ35 5160 ❊ 120 kΩ HF45 8120 HF45 8120
180 Ω HF45 5180 HF45 5180 150 kΩ HF45 8150 HF45 8150
200 Ω HF45 5200 HF45 5200 180 kΩ HF45 8180 HF45 8180
220 Ω HF45 5220 HF45 5220 220 kΩ HJ35 8220 HF85 8220
270 Ω HF45 5270 HF45 5270 270 kΩ HF45 8270 HF45 8270
330 Ω HF45 5330 HF45 5330 300 kΩ HF45 8300 HF45 8300
390 Ω HF45 5390 HF45 5390 330 kΩ HF45 8330 HF45 8330
430 Ω HF45 5430 HF45 5430 390 kΩ HJ35 8390 HF85 8390
470 Ω HF45 5470 HF45 5470 470 kΩ HF45 8470 HF45 8470
510 Ω HF45 5510 HF45 5510 560 kΩ HJ35 8560 HF85 8560
560 Ω HF45 5560 HF45 5560 680 kΩ HJ35 8680 HF85 8680
680 Ω HF45 5680 HF45 5680 820 kΩ HJ35 8820 HF85 8820
820 Ω HF45 5820 HF45 5820 1.0 MΩ HF45 9100 HF45 9100
910 Ω HF45 5910 HF45 5910 1.2 MΩ HJ35 9120 ❊
1.0 kΩ HF45 6100 HF45 6100 1.5 MΩ HJ35 9150 HF85 9150
1.2 kΩ HF45 6120 HF45 6120 1.8 MΩ HJ35 9180 HF85 9180
1.5 kΩ HF45 6150 HF45 6150 2.2 MΩ HJ35 9220 HF85 9220
1.8 kΩ HF45 6180 HF45 6180 3.3 MΩ HJ35 9330 HF85 9330
2.0 kΩ HJ35 6200 HF85 6200 3.9 MΩ HJ35 9390 ❊
2.2 kΩ HF45 6220 HF45 6220 4.7 MΩ HJ35 9470 HF85 9470
2.4 kΩ HJ35 6240 HF85 6240
2.7 kΩ HF45 6270 HF45 6270
3.0 kΩ HF45 6300 HF45 6300
1/4W Type
3.3 kΩ HF45 6330 HF45 6330
HF45
3.6 kΩ HJ35 6360 HF85 6360 1/4W Type
1/6W Type
3.9 kΩ HF45 6390 HF45 6390 HJ35
HF85
4.7 kΩ HF45 6470 HF45 6470 10mm
5mm
5.1 kΩ HF45 6510 HF45 6510
5.6 kΩ HF45 6560 HF45 6560
6.8 kΩ HF45 6680 HF45 6680
YST-SW320

8.2 kΩ HF45 6820 HF45 6820


9.1 kΩ HF45 6910 HF45 6910

1992

22

You might also like