PRODUCT OVERVIEW

LIGHTNING PROTECTION • GROUNDING • EXOTHERMIC WELDING

Lightning Protection
Kumwell Lightning Protection products are in accordance to international standards:

• IEC 62305 - Protection against lightning

• BS 6651 - Code of practice for protection of structures against lightning
• NFPA 780 - Standard for the installation of Lightning Protection System
• UL 96 - Lightning protection components

Strike Pad Air Terminal Air Terminal

Bare Copper Wire System with Tape Saddle with Tape Saddle with Adjustable Saddle

Blunt End Air Terminal Round Saddle Air Terminal Base Adjustable Saddle Cable Support One Hole Cable Grip Cable Cross Clamp

Copper Tape System

Copper Tape Tape Saddle Adjustable Saddle Tape Support Copper Tape Polypropylene Support

Grounding Application : Suitable for disperse current into the earth. Extensible to the

Material
length of ground rod by coupling.
: Copper-bounded ground rod is made by molecularly bonding
Grounding is one of the most important system pure electrolytic copper onto a low carbon, high tensile steel
and power quality. An appropriate grounding core with exceeding 0.254 mm (254 micron) thick. To ensure
system provides certain level of safety to humans Copper Bond Ground Rod
in safety and quality, it meets UL standard for grounding and
and property in case of equipment damages. bonding equipments.
• Long life
• High resistance to corrosion Application : Suitable for disperse current into the earth
• Low resistance path to ground
Material : Hot Dip Galvanized Steel in accordance with ASTM A153 with
• Ability to carry high currents the weight of zinc coating being 30 percent heavier than that
• Cost effective specified in ASTM A153.
Galvanized Steel Ground Rod

Ground Clamp for Cable One Cable to Pipe Ground Rod Copper Tape Clamp Ground Rod Clamp to Cable Ground Rod Clamp Ground Clamp Connector (Rod)

Ground Rod Coupling Driving Head for Ground Rod Earth Point & Static Earth Receptacle C-Clamp Ground Bar Pit More Effective Grounding

Aluminum Test Box PVC Test Box w/ connection bar Disconnecting Link Concrete Inspection Pit Fiber Reinforced Polyester Inspection Pit Hydraulic Crimping Tool
 Business Solution
Lightning Protection

Pyramid Holdfast
Copper Tape
Lead Sheath
Exothermic
Cable to Rebar
SPD Class 2

Earth Boss Exothermic

Cable to Steel

Ground
Test Box SPD
Class 1+2

Lightning Copper
Counter Tin Plated

Terminal Lug Exothermic

Ground Bar Cable to Bar

C-Clamp Concrete
Compression Inspection Pit

SPD Copper Bond

Class 1 Ground Rod

Kumwell Grounding & Lightning Protection System (KGLS)

Benefits:
To provide a complete solution system for electricity, telecommunication, transportation, industrial plant and buildings with a Grounding & Lightning
Protection design using Kumwell Calculation Software to comply with international standards.

To provide a complete internal and external selection of Grounding & Lightning Protection materials such as Lightning Protection Components,
Exothermic Welding , Copper Bond Ground Rod, Air Terminal, SPD and Copper Clad Steel Wire.
Exothermic Welding
Exothermic welding withstands about 5 times higher than the clamp’s connection in mechanical force. Unlike compression and bolt clamp, exothermic
welded joint becomes a homogeneous metal.

Safety Welding Metal

• Non toxic and heavy metal • Non toxic and heavy metal
• Non self-ignite • Steady burn without pop and fire out.
• Ignition temperature at least 400° C • No slag and porosity
• Smooth reaction • Consistency of color.
• High conductivity with at least 93% Cu
Mould and less than 2% Fe.
• Earnest design: cavity, flow path.
• High quality raw material.
• Accurate tolerance.
• Duration: at least 50 times in normal usage.

Mould, Horizontal to Mould, Horizontal Cable Mould, Horizontal Cable

Horizontal Cable Cross to Ground Rod End to End

Mould, Horizontal Thru Mould, Horizontal Mould, Horizontal Tap Mould, Vertical parallel down Mould, Angular Cable Drop Mould, Horizontal Thru
Cable to Ground Rod Cable Cross to Ground Rod to Horizontal Run cable to Vertical Rebar to Vertical Steel Surface Cable to side of Ground Rod

Weld Metal Powder Chain support “X” Vertical Beam Support Handle Clamp
Graphite Mould Type KW for Handle Clamp “Y” Handle Clamp Mould Brush
Type C

K-PG020215WM

Mould Scraper
Tool Box Butane Torch Flint Gun Busbar Brush Cable Clean Brush
for Powder Size

PROJECT DEVELOPMENT GROUP

2/F Le Mar Ben II Bldg., 747 San Bernardo St., Sta. Cruz, Manila
T: 733-4526 loc. 212, 213, 235 • +(632) 735-5830 • F: +(632) 735-9626
M: +(63)925-5199102 • +(63)917-5581146
E: projects@prismaelectrical.com
www.prismaelectrical.com