Precast Concrete

Fencing Products
2
Contents
Chain Link 6
Straining and Gate Post Types, Chain Link 17
Strained Wire 18
Close Board Fencing 21
Close Board or Palisade Fencing 32
Concrete Post and Panel 40
Slotted Posts - Round Top 42
Spurs 45
Slotted Posts - Pyramid Top 46
Universal Posts 48
Barrel Posts 49
Acoustic Fence 50

3
4
Contact details

Surrey Northamptonshire

Allen Concrete Allen Concrete

36 - 38 Willow Lane 35 - 37 Rixon Road
Mitcham Wellingborough
Surrey Northamptonshire
CR4 4NA NN8 4BA

T: 020 8687 2222 T: 01933 276 848

E: sales@allenconcrete.co.uk
www.allenconcrete.co.uk

All dimensions quoted are nominal. Specification may vary according to point of manufacture.

The standard products listed in this brochure are normally available from stock. Units are to our standard pattern and specification. Other types are available on application.
To find out more about any of our products or to discuss a specific project with us please get in touch with either of our offices above.

CE Marking
From 1st July 2013, under the Construction Products Regulation (CPR), it has been mandatory for manufacturers and distributors to declare the performance and apply CE marking
to any of their products which are covered by a harmonised European standard (hEN). Any products that do not fall under the scope of a harmonised European standard must not
carry CE Marking. For information on CE marked products and Declarations of Performance, please contact one of our Sales Offices. 5
.9m CHAIN
0.9m LINK
CHAIN LINK
All measurements in mm
STS 450 mm
POSTS 450 IN
mm GROUND
IN GROUND
Code Name Height Width Depth

intermediate post
09L intermediate post 1425
1425 100
: 10075– 75

POSTS 600 mm IN GROUND
Code Name Height Width Depth
09 intermediate post 1575 100 75
09T4 straining post 1575 100 100 
09G4 gate post 1575 100 100 LINE W
09S4 strut 1500 75 75  Intermed

 
straining


STS 600 mm IN GROUND GATE PO

 
gate hang
intermediate post 1575 : 100 – 75 
 centres. 2
holes B a
4 straining post 1575 : 100 x 100 
STRAIN
4 gate post 1575 : 100 x 100 For detai
sheet ref.
4 strut 1500 : 75 x 75
LINE WIRES: 3 No. at 430 mm centres. Intermediate posts 10 mm
holes, straining holes 16 mm.
GATE POST HOLING: 2 No. 25 mm gate hanging holes A at 550 mm
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres.
STRAINING & GATE POSTS: For details of types available see page 17. 6
2m CHAIN LINK
1.2m CHAIN LINK
S 600Allmm IN GROUND
measurements in mm
POSTS 600 mm IN GROUND

intermediate
Code
12
Name
post
intermediate post
1875
Height
1875
: 125 –7575
Width Depth
125
12T straining post 1875 125 125
LINE W
straining post
12G gate post 1875 : 125 x 125
1875 125 125 Interme
12S strut 1830 100 75 strainin
gate post
124I
12T4
intermediate post
straining post 1875 : 125 x 125
1875
1875
100 75
100 100
12S strut 1830 100 75 GATE P
strut 1830 : 100 x 75 gate han
2 No. 16
300 mm
intermediate post 1875 : 100 – 75
EXTEN
straining post 1875 : 100 x 100 12 mm h
steel bar
strut 1830 : 100 x 75 On post
hanging
LINE WIRES: 3 No. at 580 mm centres. Intermediate posts 10 mm Not stan
HUNG g
holes, straining holes 16 mm.
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 850 mm
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres. types 12
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres for
steel barbed wire extension brackets. On posts for side hung gates use STRAIN
For deta
top hanging hole for lower bracket fixing. Not standard on CORNER
and BACK HUNG gate posts. Not provided on types 124I and 12T4.
STRAINING & GATE POSTS: For details of types available see page 17. see7 shee
1.4m CHAIN LINK
1.4m CHAIN LINK
POSTS 600 mm IN GROUND
All measurements in mm
14 intermediate
POSTS post
600 mm IN GROUND 2075 : 125 – 75

14T straining post 2075
125 : 125
75 x 125
Code Name Height Width Depth
14 intermediate post 2075 
14T straining post 2075 125 125
 
14G 14G gate
gatepost
post 2075
2075 125 : 125
125 x 125 


LINE WIR
14S strut 1980 100 75
Intermedia
14S 14T4 strut 1980
100 : 100
100 x 75
144 intermediate post 2075 100 75
straining post 2075   straining p
14S strut 1980 100 75
 GATE PO
144 intermediate post 2075 : 100 – 75  gate hangi
 2 No. 16 m
14T4 straining post 2075 : 100 x 100  300 mm ce

14S strut 1980 : 100 x 75 EXTENSI

 12 mm hol

steel barbe
On posts f
hanging ho
LINE WIRES: 3 No. at 680 mm centres. Intermediate holes 10 mm holes,
straining posts 16 mm. Not standa
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1050 mm HUNG gat
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres.
types 144 a
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres for
steel barbed wire extension brackets. On posts for side hung gates use
STRAININ
top hanging hole for lower bracket fixing. Not standard on CORNER
and BACK HUNG gate posts. Not provided on types 144 and 14T4. For details
STRAINING & GATE POSTS: For details of types available see page 17. see 8sheet r
1.5m CHAIN LINK
1.5m CHAIN LINK
POSTS 600 mminIN
All measurements mmGROUND
POSTS 600 mm IN GROUND
15Code intermediate post
Name Height
2175 : 125 – 75
Width Depth 
15 intermediate post 2175 125 75 
15T
15T straining
straining post post 2175 2175
125 :125
125 x 125    

15G gate post 2175 125 125
15G gate post 2175 : 125 x 125

15S strut 2130 100 75

LINE WIRE
15S strut 2130 : 100 x 75 
Intermediat
 straining ho

  GATE POS

gate hangin

2 No. 16 mm
300 mm cen

EXTENSIO
 12 mm hole
steel barbed
LINE WIRES: 3 No. at 730 mm centres. Intermediate posts 10 mm On posts for
holes, straining holes 16 mm. hanging hol
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1150 mm Not standar
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres.
HUNG gate
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres for
steel barbed wire extension brackets. On posts for side hung gates
STRAINING
use top hanging hole for lower bracket fixing. Not standard on
CORNER and BACK HUNG gate posts. For details o
STRAINING & GATE POSTS: For details of types available see page 17. see sheet
9 ref
8m CHAIN LINK FENCING PRODUC

1.8m CHAIN LINK

S 600 mm IN GROUND

intermediate postin mm2475 : 125 – 75

All measurements 

POSTS 600 mm IN GROUND  

 
Code Name Height Width Depth 
18L intermediate post 2475 125 75

POSTS 760 mm IN GROUND 
S 760Code
mm IN GROUND
Name Height Width Depth
18 intermediate post 2625 125 75 
intermediate post
18T straining post 2625 : 125 – 75 125
2625 125
LINE WIRES: 3 No. at 880 mm cen
18G gate post 2625 125 125
  Intermediate posts 10 mm holes,
straining post
18S strut 2625 2595 100
: 125 x 125 75  straining holes 16 mm.
18 & 18T available in extra length up to 2925
gate post 2625 : 125 x 125 GATE POST HOLING: 2 No. 22 mm
gate hanging holes A at 1450 mm cen
strut 2595 : 100 x 75  2 No. 16 mm gate shutting holes B a
300 mm centres.
18T available in extra length up to 2925 
EXTENSION BRACKETS: 2 No.
12 mm holes E at 115 mm centres fo
steel barbed wire extension brackets
LINE WIRES: 3 No. at 880 mm centres. Intermediate posts 10 mm On posts for side hung gates use top
holes, straining holes 16 mm.
hanging hole for lower bracket fixin
Not standard on CORNER and BAC
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1450 mm
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres.
HUNG gate posts.
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres
for steel barbed wire extension brackets. On posts for side hung
gates use top hanging hole for lower bracket fixing.Not standard on STRAINING & GATE POSTS:
CORNER and BACK HUNG gate posts. For details of types available
STRAINING & GATE POSTS: For details of types available see page 17. see sheet ref. CL1. 10

LLEN CONCRETE
 Page

CI/SIB (90.21) Hf2

1.8m
1.8mCHAIN
CHAIN LINK
PRECAST CONCRETE
LINK FENCING PRODUCTS

AND 3 ROWS BARBED WIRE

AND 3 ROWS
All measurements BARBED WIRE
in mm 
 
CRANKED TOP:
CRANKED TOP:
 
POSTS 760 mm IN GROUND 
POSTS 760 mm IN GROUND
Code Name Height Width Depth  
18C18C intermediate post
intermediate post 3075 : 125125
3075 – 75 75 
18CT straining post 3075 125 125 
18CT18S straining
strut post 3075 : 125 x 125 87
2595 100
Specify inward or outward crank for straining posts.
18S 18C and
strut 2595
18CT available in extra : 100 up
lengths x 87
to 3675.


Specify

inward or outward crank for straining posts.
VERTICAL EXTENSION:
18CPOSTS
and 18CT
760 available in extra lengths up to 3675.

mm IN GROUND
LINE WIRES: 3 No. at 880 mm centres.
Code Name Height Width Depth   Intermediate posts 10 mm holes,
18V intermediate post 3075 125 75
 straining holes 16 mm.
18VT straining post 3075 125 125
VERTICAL
18VG gateEXTENSION:
post 3075 125 125 BARBED WIRE: 3 No. at 150 mm centr
POSTS 760gate
18VG6 mm post
IN GROUND 3075 150 150 (140 mm vertical extensions).
18S strut 2595 100 87  Intermediate posts 10 mm holes,
18V intermediate post 3075 : 125 – 75 straining holes 16 mm.

18VT straining post 3075 : 125 x 125 

GATE POST HOLING: 2 No. 22 mm
gate hanging holes A at 1450 mm centres
18VG gate post 3075 : 125 x 125 2 No. 16 mm gate shutting holes B at
300 mm centres.
18VG6 gate post
LINE WIRES: 3075Intermediate
3 No. at 880 mm centres. : 150 x 150posts 10 mm holes,
straining holes 16 mm. STRAINING & GATE POSTS:
18S BARBED
strut 2595 :(140
WIRE: 3 No. at 150 mm centres 100mm
x 87
vertical extensions). For details of types available
Intermediate posts 10 mm holes, straining holes 16 mm. see sheet ref. CL1.
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1450 mm
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres.
STRAINING & GATE POSTS: For details of types available see page 17. 11

ALLEN CONCRETE

8
0m CHAIN LINK FENCING PRODUCTS

2.0m CHAIN LINK 


S 760 mm IN GROUND  

 


intermediate post 2825 : 125 – 75

All measurements in mm
POSTS 760 mm IN GROUND 
straining
Code post
Name 2825 : Height
125 x 125
Width Depth

20 intermediate post 2825 125 75
gate poststraining post 2825
20T : 2825
125 x 125
125 125
20G gate post 2825 125 125
strut
215S strut 2895 : 2895
100 x 87
100 87





LINE WIRES: 3 No. at 980 mm centres.
Intermediate posts 10 mm holes,
straining holes 16 mm.

 GATE POST HOLING: 2 No. 22 mm

gate hanging holes A at 1650 mm centres
2 No. 16 mm gate shutting holes B at

300 mm centres.

EXTENSION BRACKETS: 2 No.

12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
LINE WIRES: 3 No. at 980 mm centres. Intermediate posts 10 mm On posts for side hung gates use top
holes, straining holes 16 mm.
hanging hole for lower bracket fixing.
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1650 mm
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres. Not standard on CORNER and BACK
HUNG gate posts.
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres for
steel barbed wire extension brackets. On posts for side hung gates use
top hanging hole for lower bracket fixing. Not standard on CORNER STRAINING & GATE POSTS:
and BACK HUNG gate posts. For details of types available
STRAINING & GATE POSTS: For details of types available see page 17. see sheet ref. CL1. 12

LEN CONCRETE
 CI/SIB (90.21) Hf2

2.15m
2.15mCHAIN
CHAINLINK
PRECAST CONCRETE
FENCING PRODUCTS
LINK

All measurements in mm 
POSTS 760 mm IN GROUND  

 
POSTS 760 mm IN GROUND


15 intermediate
Code Name post 2975Height
: 125 –Width
75 Depth
215 intermediate post 2975 125 75 
15T straining post
215T straining post 2975 : 125 x 125 125
2975 125
215G gate post 2975 125 125 
15G gate strut
215S post 29752895 100
: 125 x 125 87
15S strut 2895 : 100 x 87 

 
 LINE WIRES: 3 No. at 1055 mm centres.
Intermediate posts 10 mm holes,
straining holes 16 mm.

GATE POST HOLING: 2 No. 22 mm

 gate hanging holes A at 1750 mm centres.
2 No. 16 mm gate shutting holes B at
300 mm centres.

EXTENSION BRACKETS: 2 No.
12 mm holes E at 115 mm centres for
LINE WIRES: 3 No. at 1055 mm centres. Intermediate posts 10 mm steel barbed wire extension brackets.
holes, straining holes 16 mm. On posts for side hung gates use top
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1750 mm hanging hole for lower bracket fixing.
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres. Not standard on CORNER and BACK
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres for HUNG gate posts.
steel barbed wire extension brackets. On posts for side hung gates
use top hanging hole for lower bracket fixing. Not standard on STRAINING & GATE POSTS:
CORNER and BACK HUNG gate posts. For details of types available
STRAINING & GATE POSTS: For details of types available see page 17. see sheet ref. CL1. 13

ALLEN CONCRETE

10
 CONTENTS
Page
2.15m CHAIN LINK CI/SIB (90.21) Hf2
AND 3 ROWS BARBED WIRE

2.15m CHAIN LINK

PRECAST CONCRETE
FENCING PRODUCTS

All measurements in mm
 

AND 3 ROWS BARBED WIRE

CRANKED TOP:
POSTS 760 mm IN GROUND

 

  

CRANKED
Code Name TOP: Height Width Depth

POSTS
215C 760 mm IN GROUND
intermediate post 3375 125 75 

215CT straining post 3375 125 125

215C
215VG intermediate post
gate post 3375 : 125 – 75 125
3375 125 
215S strut 2895 100 87
215CT straining post 3375
Specify inward or outward crank for : 125 x 125 posts.
straining 
215C and 215CT available in extra lengths up to 3675.
215VG gate post 3375 : 125 x 125

215S strut 2895 : 100 x 87 


Specify inward or outward crank for straining posts. LINE WIRES: 3 No. at 1055 mm centres.

Intermediate posts 10 mm holes,
215C and 215CT available in extra lengths up to 3675. straining holes 16 mm.

BARBED WIRE: 3 No. at 150 mm centres

 Intermediate posts 10 mm holes,
straining holes 16 mm.


GATE POST HOLING: 2 No. 22 mm
gate hanging holes A at 1750 mm centres.
2 No. 15 mm gate shutting holes B at
300 mm centres.
LINE WIRES: 3 No. at 1055 mm centres. Intermediate posts 10 mm
holes, straining holes 16 mm. STRAINING & GATE POSTS:
BARBED WIRE: 3 No. at 150 mm centres. Intermediate posts 10 mm For details of types available
holes, straining holes 16 mm. see sheet ref. CL1.

GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 1750 mm

2.15m CHAIN LINK

centres. 2 No. 15 mm gate shutting holes B at 300 mm centres.
STRAINING & GATE POSTS: For details of types available see page 17. 14

ALLEN CONCRETE

11
 CONTENTS
Page

2.4m CHAIN LINK CI/SIB (90.21) Hf2

2.4m CHAIN LINK

PRECAST CONCRETE
FENCING PRODUCTS


All measurements in mm   
 

POSTS 760 mm IN GROUND
Code Name Height Width Depth 
24 POSTS 760 mm INpost
GROUND 
intermediate 3225 125 100
24T straining post 3325 150 150
24 gateintermediate
24G post post 3325
3225 :150
125 x 150
100
24S strut 3350 100 100
24T straining post 3325 : 150 x 150
24G gate post 3325 : 150 x 150 


24S strut 3350 : 100 x 100  



LINE WIRES: 4 No. at 787 mm,

786 mm and 787 mm centres.
Intermediate posts 10 mm holes,
straining holes 16 mm.

GATE POST HOLING: 2 No. 22 mm

 gate hanging holes A at 2050 mm centres.
2 No. 16 mm gate shutting holes B at
 300 mm centres.

EXTENSION BRACKETS: 2 No.

LINE WIRES: 4 No. at 787 mm, 786 mm and 787 mm centres. 12 mm holes E at 115 mm centres for
Intermediate posts 10 mm holes, straining holes 16 mm. steel barbed wire extension brackets.
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 2050 mm On posts for side hung gates use top
centres. 2 No. 16 mm gate shutting holes B at 300 mm centres. hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
EXTENSION BRACKETS: 2 No. 12 mm holes E at 115 mm centres for
HUNG gate posts.
steel barbed wire extension brackets. On posts for side hung gates use
top hanging hole for lower bracket fixing. Not standard on CORNER STRAINING & GATE POSTS:
and BACK HUNG gate posts.

2.4m CHAIN LINK

For details of types available
STRAINING & GATE POSTS: For details of types available see page 17. see sheet ref. CL1. 15

ALLEN CONCRETE

12
2.4m CHAIN LINK
AND 3 ROWS BARBED WIRE CONTENTS
 Page

All measurements in mm 

  CI/SIB (90.21) Hf2

2.4m CHAIN LINK

 PRECAST CONCRETE
CRANKED TOP:
FENCING PRODUCTS
POSTS 760 mm IN GROUND 

 
Code Name Height Width Depth
24C AND 3 ROWS BARBED WIRE
intermediate post 3675 125 100  


24CT straining post 3675 150 150  

CRANKED TOP:

24S strut 3350 100 100

POSTS 760 mm IN GROUND
Specify inward or outward crank for straining posts. 

VERTICAL 24C intermediate post
EXTENSION: 3675 : 125 x 100
POSTS 76024CTmm INstraining
GROUND post 3675 : 150 x 150
LINE WIRES: 4 No. at 787 mm,
Code
24S
Name
strut Height
3350 : 100 x 100
Width Depth 
786 mm and 787 mm centres.
24V intermediate post 3675 125 100
Intermediate posts 9 mm holes,
Specify inward
24VT straining post or outward
3675 150 150 posts.
crank for straining   
straining holes 15 mm.

24VG gate post 3675 150 150
BARBED WIRE: 3 No. at 200 mm centres
24S strut 3350 100 100
(140 mm vertical extensions).
VERTICAL EXTENSION: Intermediate posts 9 mm holes,
straining holes 15 mm.
POSTS 760 mm IN GROUND
GATE POST HOLING: 2 No. 22 mm
24V intermediate post 3675 : 125 x 100  gate hanging holes A at 2050 mm centres.
LINE WIRES: 4 No. at 787 mm, 786 mm and 787 mm centres. Intermediate 2 No. 15 mm gate shutting holes B at
24VTstraining
posts 9 mm holes, straining
holespost
15 mm. 3675 : 150 x 150  300 mm centres.

BARBED WIRE: 24VG

3 No. atgate
200post
mm centres (140 3675 : 150 x extensions).
mm vertical 150 EXTENSION BRACKETS: 2 No.
Intermediate posts 9 mm holes, straining holes 15 mm. 12 mm holes E at 100 mm centres
24S strut 3350 : 100 x 100
GATE POST HOLING: 2 No. 22 mm gate hanging holes A at 2050 mm
cranked top intermediate posts,
3 No. 12 mm holes E and E1 at
centres. 2 No. 15 mm gate shutting holes B at 300 mm centres.
100 mm centres cranked top
EXTENSION BRACKETS: 2 No. 12 mm holes E at 100 mm centres cranked straining posts.
top intermediate posts, 3 No. 12 mm holes E and E1 at 100 mm centres
STRAINING & GATE POSTS:
cranked top straining posts.

2.4m CHAIN LINK

For details of types available
STRAINING & GATE POSTS: For details of types available see page 17. see sheet ref. CL1. 16

ALLEN CONCRETE

13
 CONTENTS
Page

CI/SIB (90.21) Hf2

STRAINING AND GATE POST TYPES,
DATA SHEET REF. CL1
PRECAST CONCRETE
FENCING PRODUCTS

CHAIN LINK
STRAINING AND GATE POST TYPES, CHAIN LINK
      
OBTUSE 
OBTUSE 

END 
END 
CORNER 
CORNER   
EXTERNAL EXTERNAL 
OBTUSE
LH RH EXTERNAL INTERNAL 2 WAY LH RH INTERNAL


STRAIGHT
       


 CRANKED IN
      

CL1: STRAINING AND GATE POST TYPES, CHAIN LIN


CRANKED OUT

      

SIDE
 SIDE
 BACK
 BACK
 CORNER
 CORNER
    
HUNG HUNG
    HUNG HUNG
     LH RH
   
LH RH LH RH    
 


GATE POSTS 17

      

14
 CONT
Pa

(90.21) H
STRAINED WIRE CI/SIB

AINED WIRE
PRECAST CONCRETE
3 WIRE, 330mm CENTRES FENCING PRODUCTS

All measurements in mm

330mm CENTRES
POSTS 450 mm IN GROUND
Code Name Height Width Depth
09L intermediate post 1425 100 75
m IN
GROUND
POSTS 600 mm IN GROUND
mediate
Code post
Name 1425 : 100 – 75
Height Width Depth
09 intermediate post 1575 100 75
09T straining post 1575 100 100
3WS strut (slotted) 1500 100 75




m IN GROUND

mediate post 1575 : 100 – 75
ing post 1575 : 100 x 100
LINE WIRES: 3 No. at 330 mm centres.
(slotted) 1500 : 100 x 75 Intermediate posts 10 mm holes,
straining holes 16 mm, struts slotted.

LINE WIRES: 3 No. at 330 mm centres. Intermediate posts 10 mm

holes, straining holes 16 mm, struts slotted. 18
 CI/SIB (90.21) H

DSTRAINED
WIRE WIRE
PRECAST CONCRETE
FENCING PRODUCTS

50, 225, 200, 175, 150, 125 mm CENTRES

MULTI WIRE, 250, 225, 200, 175, 150, 125 mm CENTRES

All measurements in mm
Code Name Height Width Depth
7 intermediate post 1950 125 75
7T straining post 2285 125 125
1950
210WS :strut
125(slotted)
– 75 2150 100 100


2285 : 125 x 125 

2150 : 100 x 100










LINE WIRES: 7 No. at 75, 250, 225, 200,175,

150, 125 mm centres. Intermediate posts 9 mm
holes, straining holes 15 mm, struts slotted.

DEPTH IN GROUND: Choose to suit height

of fence required
LINE WIRES: 7 No. at 75, 250, 225, 200, 175, 150, 125 mm centres. Intermediate posts and nature of ground.
9 mm holes, straining holes 15 mm, struts slotted.
DEPTH IN GROUND: Choose to suit height of fence required and nature of ground. 19
 CON
P

CI/SIB (90.21) H
STRAINED WIRE
AINED WIRE
PRECAST CONCRETE
MULTI WIRE, BRITISH STANDARD SPACING, FENCING PRODUCTS
250, 250, 230, 150, 150, 150, 100 mm CENTRES

WIRE, BRITISH STANDARD SPACING,

All measurements in mm
Code Name Height Width Depth

0, 230, 150, 150, 150,

120BW intermediate post 1875
100
123
135BW intermediate post 2025 125 75 mm CENTRES
75

120BWT straining post 2025 125 125

135BWT straining post 2175 125 125 75
210WS strut (slotted) 2150 100 100
250
ermediate post 1875 : 123 – 75
ermediate post 2025 : 125 – 75 250

aining post 2025 : 125 x 125 230

aining post 2175 : 125 x 125 150

150
ut (slotted) 2150 : 100 x 100 150
100

LINE WIRES: 8 No. at 75, 250, 250, 230, 150,

150, 150, 100 mm centres. Intermediate posts 9
mm holes,straining holes 15 mm, struts slotted.
LINE WIRES: 8 No. at 75, 250, 250, 230, 150, 150, 150, 100 mm centres. Intermediate BW120
posts 9 mm holes,straining holes 15 mm, struts slotted. DEPTH
IN GROUND: Choose to suit height
of fence required and nature of ground.
DEPTH IN GROUND: Choose to suit height of fence required and nature of ground.
BW135 20
CLOSE BOARD FENCING
MORTICED POSTS - ROUND TOP 100 x 100 AND GRAVEL BOARDS

All measurements in mm
POSTS 600 mm IN GROUND
Code Name Height Width Depth
09MLR 0.9m fence post 1550 100 100
12MLR 1.2m fence post 1850 100 100
14MLR 1.4m fence post 2050 100 100
15MLR 1.5m fence post 2150 100 100

POSTS 680 mm IN GROUND

Code Name Height Width Depth
18MLR 1.8m fence post 2500 100 100
20MLR 2.0m fence post 2700 100 100
20MLRC 1.8m/2.0m fence corner post 2700 100 100

GRAVEL BOARDS
Code Name Height Width Depth
188GR gravel board 1885 150 50
230GR gravel board 2300 150 50
260GR gravel board 2600 150 50
288GR gravel board 2885 150 50
300GR gravel board 3000 150 50

ARRIS RAILS: Mortices 65 x 25 offset 30 mm from trowelled face of post.

GRAVEL BOARDS: 2 No. 12mm holes on c/l.
FILLETS: 12mm holes provided for attachment of fillets.
CORNER POSTS: Additional half-depth mortices at right angles. Gravel board holes repeated.
Dimensions and other details as standard posts. 21
 CONTE
Pag

CLOSE BOARD FENCING CI/SIB (90.21) Hf2

CLOSE BOARD FENCING

MORTICED POSTS - ROUND TOP 100 x 100 PRECAST CONCRETE
FENCING PRODUCTS

mORTICED POSTS - ROUND TOP 100 x 100

 

 

 








  

  

     

         22
 CI/SIB (90.21)
PRECAST CONCRETE
FENCING PRODUCTS

ARRIS RAILS:

 Mortices 65 x 25 offset 30 mm from trow
face of post.


GRAVEL BOARDS:
 2 No. 12mm holes on c/l.

 FILLETS:

 12mm holes provided for attachment of

CORNER POSTS:
Additional half-depth mortices at
right angles.

Gravel board holes repeated.
 Dimensions and other details as
  
 standard posts.



 

 
 
 


     

         23

ALLEN CONCRETE
CLOSE BOARD FENCING
MORTICED POSTS - PYRAMID TOP 100 X 100 AND GRAVEL BOARDS

All measurements in mm
POSTS 600 mm IN GROUND
Code Name Height Width Depth
09ML4 0.9m fence post 1550 100 100
12ML4 1.2m fence post 1850 100 100
14ML4 1.4m fence post 2050 100 100
15ML4 1.5m fence post 2150 100 100

POSTS 680 mm IN GROUND

Code Name Height Width Depth
18ML4 1.8m fence post 2500 100 100
20ML4 2.0m fence post 2700 100 100
20ML4C 1.8m/2.0m fence corner post 2700 100 100

GRAVEL BOARDS
Code Name Height Width Depth
188GR gravel board 1885 150 50
230GR gravel board 2300 150 50
260GR gravel board 2600 150 50
288GR gravel board 2885 150 50
300GR gravel board 3000 150 50

ARRIS RAILS: Mortices 65 x 25 on c/l.

GRAVEL BOARDS: 2 No. 12mm holes on c/l.
FILLETS: 12mm holes provided for attachment of fillets.
CORNER POSTS: Additional half-depth mortices at right angles. Gravel board
holes repeated. Dimensions and other details as standard posts. 24
 P

CI/SIB (90.21) H
CLOSE BOARD FENCING
CLOSE BOARD FENCING
PRECAST CONCRETE
FENCING PRODUCTS
MORTICED POSTS - PYRAMID TOP 100 X 100

mORTICED POSTS - PYRAmID TOP 100 x 100

120 198

120 198

120 198
845
1125
645
925
345
625
2050
1850
266 266 266
1550
75 75 75

100 100 100 100 100 100

09ML4 0.9m FENCE 12ML4 1.2m FENCE 14ML4 1.4m FENCE
25
 CI/SIB (90.21
PRECAST CONCRE
FENCING PRODUC

CLOSE BOARD FENCING

MORTICED POSTS - PYRAMID TOP 100 X 100
ARRIS RAILS:
120
198 Mortices 65 x 25 on c/l.

120 GRAVEL BOARDS:

198
2 No. 12mm holes on c/l.
622
840 FILLETS:
120 12mm holes provided for attachment
198
622
840 CORNER POSTS:
Additional half-depth mortices at
right angles.
Gravel board holes repeated.
622
Dimensions and other details as
945 standard posts.
1225 622 2700
685
2500
685
2150 266

266 75
266 125
75 75
75

100 100 100 100 100 100

15ML4 1.5m FENCE 18ML4 1.8m FENCE 20ML4 2.0m FENCE 26

ALLEN CONCRETE
27
CLOSE BOARD FENCING
MORTICED POSTS - ROUND TOP 115 x 115

All measurements in mm
POSTS 750 mm IN GROUND
Code Name Height Width Depth
18MS 1.8m fence post 2600 115 115
18MSC 1.8m fence corner post 2600 115 115
21MS 2.15m fence post 2900 115 115
21MSC 2.15m fence corner post 2900 115 115

CRANKED TOP:
POSTS 750 mm IN GROUND
Code Name Height Width Depth
18MSB 1.8m fence post 2985 115 115

GRAVEL BOARDS
Code Name Height Width Depth
188GR gravel board 1885 150 50
230GR gravel board 2300 150 50
260GR gravel board 2600 150 50
288GR gravel board 2885 150 50
300GR gravel board 3000 150 50

ARRIS RAILS:Mortices 65 x 25 offset 35 mm from trowelled face of post.

COUNTER RAILS: 3 No. 12 holes offset 75.
GRAVEL BOARDS: 3 No. 12mm holes offset 75mm for bracket.
FILLETS: 12mm holes provided for attachment of fillets.
CORNER POSTS: Additional half-depth mortices at right angles. Counter rail and gravel board holes
repeated.Dimensions and other details as standard posts.
Not available in Cranked Top 28
 CONTENTS
Page

(90.21) Hf2
LOSE BOARD FENCING
CI/SIB

CLOSE BOARD FENCING PRECAST CONCRETE

FENCING PRODUCTS
MORTICED POSTS - ROUND TOP 115 X 115
RTICED POSTS - ROUND TOP 115 x 115 75
15
0
0
115 140 15
140
115 320
140
75
115 140
115 320 320

990 760
600
610 610

2985
600 760 2900
610
750 610

2600

230 230 192.5

37.5 37.5 75
37.5 37.5
75
75

CLOSE BOARD FENCING

115 115 115 115 115 115
18MS 1.8m FENCE 21MS 2.15m FENCE 18MSB 1.8m FENCE 29

LEN CONCRETE

25
CLOSE BOARD FENCING
BS TYPE MORTICED POSTS AND GRAVEL BOARDS

All measurements in mm
POSTS 600 mm IN GROUND
Code Name Height Width Depth
12MB 1.2m fence post 1900 140 115
12MBC 1.2m fence corner post 1900 140 115

POSTS 750 mm IN GROUND
Code Name Height Width Depth
15MB 1.5m fence post 2350 140 115
18MB 1.8m fence post 2650 140 115
20MB 2.0m fence post 2800 140 115
24MB 2.4m fence post 3250 140 115
18MBC 1.8m fence corner post 2650 140 115
20MBC 2.0m fence corner post 2800 140 115
24MBC 2.4m fence corner post 3250 140 115
GRAVEL BOARDS
Code Name Height Width Depth
188GR gravel board 1885 150 50
230GR gravel board 2300 150 50
260GR gravel board 2600 150 50
288GR gravel board 2885 150 50
300GR gravel board 3000 150 50

ARRIS RAILS: Mortices 65 x 25 offset 36 mm from trowelled face of post. 2 No. 12mm holes through face to top mortice.
COUNTER RAILS: Mortices 50 x 32 offset 38 mm from face of post.
GRAVEL BOARDS: 4 No. 12mm holes offset 75 mm for bracket.
FILLETS: 12mm holes provided for attachment of fillets.
CORNER POSTS: Additional half-depth mortices at right angles. Gravel board holes repeated. Dimensions and other details as standard posts. 30
 CLOSE BOARD FENCING CONTENTS
Page
CONTE
Pag
BS TYPE MORTICED POSTS AND GRAVEL BOARDS
CI/SIB (90.21) Hf2 CI/SIB (90.21) Hf2

E BOARD FENCING
PRECAST CONCRETE

CLOSE BOARD FENCING

PRECAST CONCRETE
FENCING PRODUCTS FENCING PRODUCTS
115 120
175

ORTICED POSTS ANDBS

GRAVEL BOARDS POSTS AND GRAVEL BOARDS
115 115
TYPE mORTICED
1885, 2300, 2600, 2885 or 3000
1885, 2885 or 3000 50
800 633
115 120
150 175
115 115
188GR
188GR ARRIS RAILS:
230GR
288GR Mortices 65 x 25 offset
175 36 mm from
115 120
260GR
300GR trowelled face of post. 2 No.
115 12mm 115
288GR
300GR
holes through face to top mortice. 815 650 633
COUNTER RAILS: 630
115 120 Mortices 50 x 32 offset
675 38 mm from 500
175
115 115 face of post.
3250
GRAVEL BOARDS:
525 4 No. 12mm holes offset 75 mm
650 633
for bracket. 500
625 2650
FILLETS:
12mm holes provided for 2350
1900
attachment of fillets. 215 215 215

215 CORNER POSTS: 37.5

37.5
37.5
37.5
37.5
37.5
Additional half-depth mortices at
37.5 37.5 37.5
37.5
37.5
37.5 right angles.
Gravel board holes repeated.
Fillet hole
Dimensions and other details as
positions
standard posts.not shown

CLOSE BOARD FENCING

Fillet hole 20mB as 18mB with
for clarity positions extra Gravel board
not shown holes.
for clarity

140 115 140 115 140 115 140 115

12MB 1.2M FENCE 15MB 1.5M FENCE 18MB 1.8M FENCE 24MB 2.4M FENCE 31

CONCRETE ALLEN CONCRETE 27

28
01/01/2014 0
 CLOSE BOARD OR PALISADE FENCING
LIGHTWEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS

All measurements in mm
POSTS 600 mm IN GROUND
Code Name Height Width Depth
09RGL 0.9m fence post 1450 125 - 100 110
105RGL 1.05m fence post 1600 125 - 100 110
12RGL 1.2m fence post 1750 125 - 100 110
CONTENTS
POSTS 675 mm IN GROUND Page

(90.21) Hf2
Code Name Height Width Depth
15RGL 1.5m fence post 2050 125 - 100 110 CI/SIB
18RGL 1.8m fence post 2500 125 - 100 110

OARD OR PALISADE FENCING

PRECAST CONCRETE
FENCING PRODUCTS
GRAVEL BOARDS
Code Name Height Width Depth

ECESSED TYPE POSTS AND GRAVEL BOARDS

188GR
230GR
gravel
gravel
board
board
1885
2300
150
150
50
50
260GR gravel board 2600 150 50
288GR gravel board 2885 150 50
300GR gravel board 3000 150 50
2885 or 3000 50

45°
100

100 110

100 Recesses for

ARRIS RAILS: 110
arris rails as shown.100
2 No. 12mm holes 150
through each recess.
100
GRAVEL BOARDS: 2 No. 12mm holes for gravel boards.
150
FILLETS: 12mm holes provided for attachment of fillets. 16 32

600
450
ARRIS RAILS:
Recesses for arris rails
 P

CI/SIB (90.21) H

CLOSE BOARD
OR OR PALISADE FENCING
PRECAST CONCRETE
CLOSE BOARD PALISADE FENCING FENCING PRODUCTS

LIGHTWEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS

LIGHTWEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS

1885, 2300, 2600,

2885 2885 or 3000
or 3000 50

150
45°
188GR
288GR 288GR 100
230GR
300GR 300GR
260GR 100 110

100 110 100 150

100 110 100 150
100 16
150
600
450
300 ARRIS RAILS:
Recesses for arris rails
as shown above. 2 No. 12mm holes
300 300 300 1750 through each recess.
1600
1450 GRAVEL BOARDS:
2 No. 12mm holes for gravel boards.

FILLETS:
12mm holes provided for
attachment of fillets.
Fillet hole
positions
not shown
for clarity
125 110 125 110 125 110
09RGL 0.9M FENCE 105RGL 1.05M FENCE 12RGL 1.2M FENCE 33

ALLEN CONCRETE
 CI/SIB (90.21) Hf2
CI/SIB
PRECAST CONCRETE PREC
FENCING PRODUCTS FENC

CLOSE BOARD OR PALISADE FENCING

LIGHTWEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS

100 110 100 110

100 150 100 150

0 110 100 110

150 100 150 600 600

450 450

600 600
450 450
2400 2400

2050 2050
300 300
300 300

Fillet hole Fillet hole

positions positions
not shown not shown
for clarity for clarity

5 110 125 110 125 110 125 110

GL 1.5M FENCE 15RGL 1.5M FENCE 18RGL 1.8M FENCE 18RGL 1.8M FENCE 34
Fillet hole positions not shown for clarity

LEN CONCRETE
ALLEN CONCRETE

31
35
 CLOSE BOARD OR PALISADE FENCING
LIGHTWEIGHT RECESSED TYPE POSTS WITHOUT GRAVEL BOARDS

All measurements in mm
POSTS 600 mm IN GROUND
Code Name Height Width Depth
09RL 0.9m fence post 1450 125 - 100 110
105RL 1.05m fence post 1600 125 - 100 110
14RL 1.4m fence post 1900 125 - 100 110
CONTENTS

POSTS 675 mm IN GROUND Page
Code
18RL
Name
1.8m fence post
Height
2400
Width
125 - 100
Depth
110 CI/SIB (90.21) Hf2

OARD OR PALISADE FENCING

PRECAST CONCRETE
FENCING PRODUCTS

ECESSED TYPE POSTS AND GRAVEL BOARDS

2885 or 3000 50

45°
100

100 110

100 110 100 150

100 RAILS: Recesses
ARRIS 150 for arris rails as shown. 2 No. 12mm holes through each recess.
FILLETS: 12mm holes provided for attachment of fillets. 16 36

600
450
ARRIS RAILS:
Recesses for arris rails
 CONTENT
Page

CI/SIB (90.21) Hf2

CLOSE BOARD OR PALISADE FENCING
CLOSE BOARD OR PALISADE FENCING
PRECAST CONCRETE
FENCING PRODUCTS
LIGHTWEIGHT RECESSED TYPE POSTS WITHOUT GRAVEL BOARDS

LIGHTWEIGHT RECESSED TYPE POSTS WITHOUT GRAVEL BOARDS

100 110

100 150

100 110 675

100 150
100 110

100 110 100 150 450

100 150 675
2400
600
450 450
1900

1600
1450

Fillet hole
positions
not shown
for clarity

125 110 125 110 125 110 125 110

09RL 0.9M FENCE 105RL 1.05M FENCE 14RL 1.4M FENCE 18RL 1.8M FENCE
37

ALLEN CONCRETE

33
 CLOSE BOARD OR PALISADE FENCING
BS TYPE RECESSED POSTS AND GRAVEL BOARDS
All measurements in mm
POSTS 750 mm IN GROUND
Code Name Height Width Depth

18RG 1.8m fence post 2500 140 - 100 115

20RG 2.0m fence post 2700 140 - 100 115 CONTENTS
24RG 2.4m fence post 3100 140 - 100 115 Page

GRAVEL BOARDS
CI/SIB (90.21) Hf2

SE BOARD OR PALISADE FENCING

Code Name Height Width Depth
PRECAST CONCRETE
188GR gravel board 1885 150 50 FENCING PRODUCTS
230GR gravel board 2300 150 50
260GR gravel board 2600 150 50
288GR gravel board 2885 150 50
WEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS
300GR gravel board 3000 150 50

BS TYPE RECESSED POSTS WITHOUT GRAVEL BOARDS

POSTS 750 mm IN2885 or 3000
GROUND 50

Code Name Height Width Depth

18R 1.8m fence post 2500 140 - 100 115
45°
100

100 110
ARRIS RAILS: Recesses for arris
100rails as shown above.
110 2 No. 12mm holes through each recess.
100 150
GRAVEL BOARDS: 2 No. 12mm holes for gravel boards.
110
FILLETS: 100
12mm holes provided 150 of fillets.
for attachment
CORNER POSTS: All corner posts 125 x 125 section. Recesses and gravel board holes repeated at right angles. 16 38
150
600
450
300 ARRIS RAILS:
Recesses for arris rails
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
FENCING PRODUCTS
100 115

100 150

100 115

100 600
100 115 150 100 115

100 150 100 150 45°

100
700

600 600
675

16
3100
700 ARRIS RAILS:
600 600
Recesses for arris rails
2700 675 as shown above. 2 No. 12mm holes
2500 2500 through each recess.

GRAVEL BOARDS:
300 300 300 2 No. 12mm holes for gravel boards.

FILLETS:
12mm holes provided for
attachment of fillets.
Fillet hole
positions CORNER POSTS:

CLOSE BOARD OR PALISADE

not shown
for clarity All corner posts 125 x 125 section.
Recesses and gravel board holes
repeated at right angles.

140 115 140 115 140 115 140 115

18RG 1.8M FENCE 20RG 2.0M FENCE 24RG 2.4M FENCE 18R 1.8M FENCE
39

ALLEN CONCRETE

35
01/01/2014
CONCRETE POST AND PANEL
All measurements in mm
Code Name Height Width Depth
15PH Intermediate post 1500 125 100
18PH Intermediate post 1800 125 100
21PH Intermediate post 2100 125 100
24PH Intermediate post 2400 125 100
27PH Intermediate post 2700 125 100
30PH Intermediate post 3000 125 100
33PH Intermediate post 3300 125 100
36PH Intermediate post 3600 125 100
37PH Intermediate post 3700 175 125
40PH Intermediate post 4000 175 125
43PH Intermediate post 4300 200 150
46PH Intermediate post 4600 200 150
49PH Intermediate post 4900 200 150
52PH Intermediate post 5200 200 150
15PC Corner post 1500 125 125
18PC Corner post 1800 125 125
21PC Corner post 2100 125 125
24PC Corner post 2400 125 125
27PC Corner post 2700 125 125
30PC Corner post 3000 125 125
33PC Corner post 3300 150 150
36PC Corner post 3600 150 150
18PB Intermediate post with integral bent over arm 3100 125 100
21PB Intermediate post with integral bent over arm 3400 125 100
24PB Intermediate post with integral bent over arm 3700 125 100
194P Panel 1940 300 47 All panels have 5mm overlap and concealed joints ‘J’
194PD Panel with durite stone applied to back face 1940 300 47 All panel posts have 2 No. 12mm Dia. holes at E 115mm
centres for barbed wire extension brackets 40
 CONTENTS
All measurements in mm
Page
Fence height in metres 0.9 1.2 1.5 1.8 2.1 2.4
No. of panels per bay 3 4 5 6 7 8 CI/SIB (90.21) Hf2
PRECAST CONCRETE
FENCING PRODUCTS
5
‘J’

All panels have 5mm overlap and concealed joints ‘J’

305
75 0
15 1940 42 (47 Ends)
0
15
2m post centres 50
80

100
E
115
E

All panel posts have 2

No. 12mm Dia. holes at
E 115mm centres
for barbed wire extension
brackets

CONCRETE POST AND PANEL

Panel slot
50 x 25

FENCE HEIGHT IN METRES 0.9 1.2 1.5 1.8 2.1 2.4 100
NO. OF PANELS PER BAy 3 4 5 6 7 8 41

ALLEN CONCRETE

37
SLOTTED POSTS - ROUND TOP
FOR TIMBER PANELS

All measurements in mm
Code Name Height Width Depth Code Name Height Width Depth
15P Intermediate post 1500 100 85 15PC Corner post 1500 125 125
18P Intermediate post 1800 100 85 18PC Corner post 1800 125 125
21P Intermediate post 2100 100 85 21PC Corner post 2100 125 125
24P Intermediate post 2400 100 85 24PC Corner post 2400 125 125
27P Intermediate post 2700 100 85 27PC Corner post 2700 125 125
15PH Intermediate post 1500 125 100 30PC Corner post 3000 125 125
18PH Intermediate post 1800 125 100 33PC Corner post 3300 125 125
21PH Intermediate post 2100 125 100 36PC Corner post 3600 125 125
24PH Intermediate post 2400 125 100
27PH Intermediate post 2700 125 100 15GT18 Gravel board recessed 1800 150 50
30PH Intermediate post 3000 125 100 15GT Gravel board recessed 1830 150 50
33PH Intermediate post 3300 125 100 15GTP Gravel board solid 1830 150 50
36PH Intermediate post 3600 125 100 30GT18 Gravel board recessed 1800 300 50
30GT Gravel board recessed 1830 300 50
15PE End post 1500 100 85 30GTP Gravel board solid 1830 300 50
18PE End post 1800 100 85 30GTR Gravel board rock faced 1830 300 50
21PE End post 2100 100 85
24PE End post 2400 100 85
27PE End post 2700 100 85

All posts have slots 56 - 50 x 25 deep. 42

 CONTENTS
Page

SLOTTED POSTS - ROUND TOP CI/SIB (90.21) Hf2

PRECAST CONCRETE

SLOTTED POSTS - ROUND TOP

FOR TIMBER PANELS
FENCING PRODUCTS

FOR TImBER PANELS

150

1800
15GT18 50

150

1830
15GT 50

150

1830
15GTP 50

2700
300
2400

1800 2100
30GT18 50
1800

300 1500

1830
30GT 50

300

SLOTTED POSTS
1830
30GTP 50 85 100 85 100 85 100 85 100 85 100
15P 18P 21P 24P 27P
30GTR Gravel board rock faced 1830 x 300 x 50 not shown 43

ALLEN CONCRETE

40
 CONTENTS
Page
SLOTTED POSTS - ROUND TOP CI/SIB (90.21) Hf2
FOR TIMBER PANELS PRECAST CONCRETE

SLOTTED POSTS - ROUND TOP FENCING PRODUCTS

FOR TImBER PANELS

3600

3300
3000

2700

2400

2100

1800

1500

SLOTTED POSTS
100 125 100 125 100 125 100 125 100 125 100 125 100 125 100 125
15PH 18PH 21PH 24PH 27PH 30PH 33PH 36PH 44

ALLEN CONCRETE

41
01/01/2014
 CONTENT
Page

SPURS CI/SIB (90.21) Hf2

SPURS
PRECAST CONCRETE
FENCING PRODUCTS

All measurements in mm
Code Name Height Width Depth
105LS Spur 1050 75 75
105LS
12LS Spur 1050 x 75 x75
Spur 1200 75 75 Holes 12mm diameter
12LS
105SP Spur 1200 x 75 x 75
Spur 1050 100 100
12SP Spur 1200 100 100
135SP Spur 1350 100 100
105SP
15SP Spur 1050 x 100 100
Spur 1500 100 x 100
12SP Spur 1200 x 100 x 100
Holes 12mm diameter
135SP Spur 1350 x 100 x 100
15SP Spur 1500 x 100 x 100

150

150
300
150 150
300
150 150
300 300

300 300 1500

1350
1200 1200
1050 1050

75 75 75 75 100 100 100 100 100 100 100 100

105LS 12LS 105SP 12SP 135SP 15SP
45

ALLEN CONCRETE

45
SLOTTED POSTS - PYRAMID TOP
FOR TIMBER PANELS

All measurements in mm
Code Name Height Width Depth
15P4 Intermediate post 1500 100 85
21P4 Intermediate post 2100 100 85
24P4 Intermediate post 2400 100 85
27P4 Intermediate post 2700 100 85
18P4 Intermediate post 1800 100 85
15P4E End post 1500 100 85
21P4E End post 2100 100 85
24P4E End post 2400 100 85
27P4E End post 2700 100 85
15P4C Corner post 1500 125 125
18P4C Corner post 1800 125 125
21P4C Corner post 2100 125 125
24P4C Corner post 2400 125 125
27P4C Corner post 2700 125 125
15GT18 Gravel board recessed 1800 150 50
15GT Gravel board recessed 1830 150 50
15GTP Gravel board solid 1830 150 50
30GT18 Gravel board recessed 1800 300 50
30GT Gravel board recessed 1830 300 50
30GTP Gravel board solid 1830 300 50
30GTR Gravel board rock faced 1830 300 50

All posts have slots 56 - 50 x 25 deep. 46

 CONTENTS
Page

SLOTTED POSTS - PYRAMID TOP CI/SIB (90.21) Hf2

SLOTTED POSTS - PYRAmID TOP

PRECAST CONCRETE
FOR TIMBER PANELS FENCING PRODUCTS

FOR TImBER PANELS

150

1800
15GT18 50

150

1830
15GT 50

150

1830
15GTP 50

2700
300
2400

1800 2100
30GT18 50
1800

300 1500

1830
30GT 50

300

SLOTTED POSTS
1830
30GTP 50 85 100 85 100 85 100 85 100 85 100
15P 18P 21P 24P 27P
30GTR Gravel board rock faced 1830 x 300 x 50 not shown 47

ALLEN CONCRETE

43
UNIVERSAL POSTS
C
All measurements in mm
Code Height
15U 1500 100 100
Width Depth
CI/SIB (90.21

UNIVERSAL POSTS
PRECAST CONCRET
18U 1800 100 100 FENCING PRODUCT
24U 2400 100 100
27U 2700 100 100
30U 3000 100 100
33U 3300 100 100
POST: 100 x 100 HOLING:
12mm holes at 75 mm
15U 1500 from top then at 300mm.
18U 1800
24U 2400
27U 2700
30U 3000
33U 3300
3300

3000

2700

2400

1800

1500

100 100 100 100 100 100

HOLING: 12mm holes at 75 mm from top then at 300mm. 15U 18U 24U 27U 30U 33U 48

ALLEN CONCRETE
BARREL POSTS
FOR TUBULAR STEEL RAIL
CONTENTS
All measurements in mm Page
Code Name Height Width Depth No. of holes
105BP Post 1050 150 100 1 Hole CI/SIB (90.21) Hf2

BARREL POSTS
PRECAST CONCRETE
16BP Post 1600 150 100 1 Hole 100 100
FENCING PRODUCTS
16BP2 Post 1600 150 100 2 Hole
16BPSCC Post 1600 150 100 2 Hole 600
168BP Post 1680 225FOR
- 150 TUBULAR
100 STEEL
2 Hole RAIL 100
175BP Post 1750 155 145 - 110 2 Hole
18BPHCC Post 1880 170105 BP Post
- 140 170 1050 x 150 x2100
- 100 Hole 1 Hole 60mm
1600
60mm
1600

15BP Post 1500 13016BP

Post
130 1600 x 150 x2100
Hole 1 Hole Dia Hole Dia Holes

16BP2 Post 1600 x 150 x 100 2 Hole 60mm

1050
Dia Hole

16BPSCC Post 1600 x 150 x 100 2 Hole

168BP Post 1680 x 225 - 150 x 100 2 Hole
175BP Post 1750 x 155 x 145 - 110 2 Hole
18BPHCC Post 1880 x 170 - 140 2 Hole 100
105BP
150 100
16BP
150 100
16BP2
150

15BP Post 1500 x 130 x 130 2 Hole 100 140

110
150 100
100
160
60mm 60mm
200 Dia Holes 12x12 Dia Holes
550
Chamfer 190
585
460
400

525 60mm
1880 Dia Holes
1750 1820
55mm
Dia Holes 1680
60mm 1600 1500
Dia Holes

Chamfererd
Edges

595

BARREL POSTS
100 150 100 225 145 155 170 170 130 130
16BPSCC 168BP 175BP 18BPHCC 15BP
49
ALLEN CONCRETE

46
01/01/2014
 ACOUSTIC FENCE 1900
50

C
Post Length Number 50 10
Code of Post of Panels

AC9
AC12
All measurements
1875
2175
3 in mm
4 CI/SIB (90.21
10

ACOUSTIC FENCE
AC15 Code 2475 Fence Height
5 Length of post Number of Panels
AC18 AC9 2775 900 6 1875 3 Tongue PRECAST CONCR
AC21 3075
AC12 1200 8
7
2175 4 FENCING PRODUC
CI/SIB
AC24 3375

ACOUSTIC FENCE
PRECAS
AC27 AC15
3675 1500 9 2475 5 305 FENCIN
AC30 3975
AC18 1800 10 2775
305 6 O/A 300
AC33 4275 11
AC36 AC21
4575 2100 12 3075 7
AC24 2400 3375 8
AC27 2700 3675 9 Groove 10
AC30 3000 3975 10
AC33 3300 4275 Height module
11 300. Post centres 2010 for intermediate posts50200 x 160
AC36 3600 4575 50 12available with either smooth or an exposed aggregate finish
Panels are
6.5 RAD

SECTION OF PANEL
1900
Post height 1875 - 4575 in 300 increments

ACOUSTIC FENCE
Fence Post Length Number 50
Height Code of Post of Panels
1900
Post height 1875 - 4575 in 300 increments

900 AC9 1875 3

1200 AC12 2175 4
Fence Post Length Number 1500 50AC15 2475 5
Height Code of Post of Panels 1800 AC18 2775 6 Tongue

RETE
2100 AC21 3075 7
25

38
900 AC9 1875 Slot 3 2400 AC24 3375 8
2700 AC27 3675 9
1200 AC12 2175 4 3000 AC30 3975 10
1500 AC15 2475 5 305
3300 AC33 4275 11
1800 AC18 2775 6 3600 AC36 4575 12 Tongue
01/01/2014
2100 AC21 3075 7
25
2400 AC24 3375 8 Groove
Slot
2700 AC27 3675 9
305
3000 AC30 3975 10 Height module 300. Post centres 2010 for intermediate posts 200 x 160
305 O/A
Panels are available with either smooth or an exposed aggregate finish
3300 AC33 4275 11
3600
Height module 300. Post centres 2010 AC36 4575 12
for intermediate posts 200 x 160
160 200
Panels are available with either smooth Groove
or an exposed aggregate finish. 50
INTERMEDIATE POST
Height module 300. Post centres 2010 for intermediate posts 200 x 160
Panels are available with either smooth or an exposed aggregate finish
ALLEN CONCRETE
6.5 RAD
Surrey: Allen Concrete, 36 - 38 Willow Lane, Mitcham, Surrey CR4 4NA T: 020 8687 2222
Northamptonshire: Allen Concrete, 35 - 37 Rixon Road, Wellingborough, Northamptonshire NN8 4BA T: 01933 276 848
E: sales@allenconcrete.co.uk 51
www.allenconcrete.co.uk