0% found this document useful (0 votes)

275 views52 pages

Databook 2011

Databook bridgestone

Uploaded by

jorgegacha

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

275 views52 pages

Databook 2011

Databook bridgestone

Uploaded by

jorgegacha

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 52

GENERAL INFORMATION

RADIAL TIRE

BIAS TIRE

O-RING, FLAP, RIM, VALVE, CONVERSION TABLES

©2011 Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan

All rights reserved.
No part of this manual may be reproduced in any form by any electronic or mechanical means,
including information storage and retrieval devices or systems, without prior written permission
from Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan.
Notice: Although great care has been taken in producing this manual, we can accept no responsibility for any loss or
damage resulting from undetected errors or misprints which may have occurred.

Due to the constant advance of tire technology, the contents of this data book are subject to change without notice.

I
CONTENTS INTRODUCTION
1. Industry Standard
INTRODUCTION Bridgestone Corporation has developed a wide range of tire patterns and specifications, so
1. Industry Standard ................................................................................................. 1 that the proper Off-the-Road tire can be matched to any vehicle, service, or operating
conditions.
2. Application Vehicle Matching Chart ................................................................... 1
Bridgestone’s Off-the-Road tires are designed and produced to meet the commonly accepted
international standards, those set by the TRA (Tire and Rim Association) in the U.S.A., by the
GENERAL INFORMATION ETRTO (European Tire and Rim Technical Organization) in Europe and/or by the JATMA (Japan
Automobile Tire Manufacturers’ Association) in Japan*.
1. Structural Diagram ............................................................................................... 2
Load capacities, inflation pressures, dimensions such as overall tire diameter and width, as
2. Definitions ............................................................................................................. 3 well as the relative rims and tube valves follow these standards.
3. Classification ........................................................................................................ 4 If a tire is to be used for a purpose other than that for which it is originally intended, please
consult Bridgestone Corporation for advice.
4. Tire Markings ........................................................................................................ 6
*Where differences exist between the TRA, ETRTO and JATMA standards,
Bridgestone selects the most applicable.
RADIAL TIRE
1. Tread Designs ..................................................................................................... 11
2. Application .......................................................................................................... 16
3. Technical Data .................................................................................................... 22
2. Application Vehicle Matching Chart
4. Remarks............................................................................................................... 52 APPLICATION VEHICLE
Dump Trucks, Motor Scrapers, Articulated Dump Trucks,
Earthmover Service
BIAS TIRE Coal Haulers, Logging Trucks, Other Mining Trucks, etc.
1. Tread Designs ..................................................................................................... 54 Grader Service Motor Graders
2. Application .......................................................................................................... 56 Front-End Loaders, Back-hoe Loaders, Skid Steer Loaders,
Loader & Dozer Service
3. Technical Data .................................................................................................... 62 Dozers, Shuttle Trucks, Load-Haul-Dumps, etc.

4. Remarks............................................................................................................... 82 Mobile Crane Service

All-Terrain Cranes, High-Speed Vehicles,etc.
(High-Speed)
Straddle Carriers, Aircraft Towing Tractors, Container Stackers,
OTHER SPECIFICATION Industrial Service
Counter-balanced Lift Trucks, Mobile Crushers, Log Stackers, etc.
1. O-Ring Specifications ........................................................................................ 84 Logging Service Log-Skidders
2. Flap Specifications ............................................................................................. 84
Compactor Service Compactor, Road Rollers
3. Rim and Valve ..................................................................................................... 85
Sand Service Sand Service Trucks

OTHER INFORMATION
1. Unit Conversion Tables...................................................................................... 92
2. Specific Weight (Approximately)....................................................................... 95

II INTRODUCTION 1
GENERAL INFORMATION
1. Structural Diagram 2. Definitions
2.1 Tire Size 2.4 Overall Width (OW)
The size of each tire is indicated by nominal width and “Overall Width” is the width of a new tire, including 24-
rim diameter in inches and mm. hour inflation growth, and including protective side ribs,
Off-The-Road Radial Tire (ORR) Radial structure is indicated by the letter “R”. For some bars or decorations.
tire the aspect ratio is indicated by percentage.

Example
2.5 Section Width (SW)
Radial Tire ; 40.00R57, 33.25R35, 445/95R25 “Section Width” is the width of a new tire, including 24-
Bias Tire ; 30.00-51, 45/65-45 hour inflation growth and including normal sidewalls, but
not including protective side ribs, bars, or decorations.

2.2 Star Rating, Ply Rating and 2.6 Static Loaded Radius and
Load Index Width (SLR, SLW)
Belt
Tread The load capacity of a tire is indicated by the star “Static Loaded Radius” is the shortest distance from the
rating (in case of radial tire) and the ply rating (in case axle center to the contact surface of a tire and “Static
of bias tire). Loaded Width” is the overall width of a tire, mounted on
The load index is applied in countries where the the approved rim at the specified inflation pressure and
ETRTO standards are used. placed still and vertically on a flat board, and loaded with
Casing Ply the specified load.
2.3 Overall Diameter (OD)
“Overall Diameter” is twice the section height of a new
2.7 Original Tread Depth (OTD)
tire, plus the nominal rim diameter, including 24-hour “Original Tread Depth” is the tread depth of a new tire
Chafer
inflation growth. measured at the point of tread-indicator where available
or one-fourth the width of the tire crown section from the
crown center, including 24-hour inflation growth.

Overall Width (OW)

Section Width (SW)
Off-The-Road Bias Tire (ORS) Tread Width

Inner Liner

Bead Wire
Section
Height
(SH)
Free
Radius
Rim Flange Height

Breaker Rim Width

Overall Nominal Rim

Diameter Diameter
(OD)
Dual
Carcass Spacing

Static Loaded
Radius
Chafer (SLR)

Static Loaded
Width
(SLW)

2 GENERAL INFORMATION 3
3. Classification 3.2 TRA Classification and Corresponding Bridgestone Off-The-Road
3.1 Uses and Characteristics of Off-The-Road Tires Tires
Off-The-Road tires are classified by the TRA as follows, and the names of the tread patterns of the corresponding
The characteristics that Off-The-Road tires must possess differ according to their function and the type of vehicles
Bridgestone Off-The-Road tires are described below.
they are mounted on.
Bridgestone Tread Pattern
TRA Classification Tread Type
Radial Bias
Type/Service Function Vehicles Main tire characteristics E= Earthmover (Haulage Service)
required E-2 Traction VUT VKT VSB
VFT VHS VSW
E-3 Rock VLT VMT VTS WL RL VL2
Rigid dump trucks VEL VRL VRF
E-4 Rock Deep L317 VLTS VSNT VMTS RLS ELS2
VMTP VZTS VZTP VELSL
Articulated dump trucks
Heat-resistance, VELS VRLS VREP VRDP
Cut-resistance, VRPS VRQP
Earthmover Transporting E-7 Flotation VSJ SCP2
Wear-resistance,
Coal haulers
Shock burst-resistance G=Grader
G-1 Rib RG
Scrapers G-2 Traction VUT VKT VSW GL FG
G-3 Rock RL
G-4 Rock Deep VMTS
Off road trucks
L=Loader & Dozer (Slow Speed Service)
Traction,
L-2 Traction Regular VUT VKT VSW GL FG
Grader Grading, Leveling Maneuverability, L-3 Rock Regular VLT VMT VJT VTS RL VL2
Graders (directional stability) L-4 Rock Deep VLTS VSNT VSNL RLS NL
L-5 Rock Extra-Deep VSDT VSDL DL
L-5S Smooth Extra-Deep VSMS STMS
Cut-resistance,
Loader and Loading and C=Compactor Service
Loaders, Bulldozers Wear-resistance
dozer dozing C-1 Smooth RR
Stability
C-2 Grooved AL2
LHDs LS=Logging Service
Oil-resistance,
LS-2 Intermediate TGS
Compactor Compacting Cut-resistance,
Wear-resistance Mobile Crane Service (High-Speed)
Tire-rollers
Mobile Crane Service VGT VSB VHB VHS VSW
Industrial Service
Traction, Flotation, VHB VEL VCH VCHD VCHS
Logging Log-skidding Industrial Service RL RLS ELS2 STMS YS2
Cut-resistance VELS VRLS VSDL VSMS

Log-skidders
Design Tread-Depth
Heat-resistance, 100% 150% 250%
Mobile crane High-speed
Wear-resistance,
(High-speed) Travelling
Traction
All-Terrain Cranes

Uneven wear,
Industrial Handling & Towing Wear-resistance,
Stability Regular Tread Deep Tread Extra Deep Tread
E-2/E-3 E-4
Handling & Towing Equipments L-2/L-3 L-4 L-5/L-5S
G-2/G-3 G-4

4 GENERAL INFORMATION 5
4. Tire Markings 4.2 Type of Tire Structures Classified by Service and Designated by
1
(ORR) Bridgestone
Each Bridgestone tire has a Bridgestone code number on the tire sidewall according to its specifications.
1 Brand Name
OFF THE R OA D OFF THE R OA D OFF THE ROA D

2 Bridgestone’s Specifications Code E A R T H M OV I N G L OA D E R

& DOZER GRADER
TYPE 2-A TYPE 2-A TYPE 2-A
E S I S TA N T E S I S TA N T E S I S TA N T
3 Pattern Name CUT R CUT R CUT R
For For For
Earthmover service Loader and Dozer service Grader service
4 Serial Number
OFF THE ROA D OFF THE ROA D

5 2 5 Tire Size, Star Rating,Tubeless or Tube Type AND

IAL SERVICE
INDUSTR WHEEL
CRANE USE

For For
Industrial service Mobile Crane Service

Tire Structures Classified by Type of Service and Bridgestone’s

Designations
4
Service
Service BS
BS Code No.
Code No. Structure
Structure
1A Standard
3
Earthmover Service (E) 2A Cut-resistant
3A Heat-resistant
4.1 Type of Tire Size Designation 1A Standard
Grader Service (G)
Regular 27.00 R 49 Tire Aspect Ratio 2A Cut-resistant
Star Rating 2A Cut-resistant
Loader & Dozer Service (D) 2V Special cut-resistant (Type“V”)
Rim Diameter (inches)
2Z Special cut-resistant (Type“Z”)
Radial Structure
Section Width (inches) Logging Service (S) 2V
Standard

NOTES: Bias Tire Only
SH = 0.95
2V tires are standard for log skidder service since the possibility of the cutting is high in log skidder operations.
Wide Base 33.25 R 35 SW
Star Rating Steel Breaker Tire
Rim Diameter (inches) A: Standard Type V Type Z
Radial Structure V: Cut-resistant type “V”
Section Width (inches) Structure: (Steel Breaker)
Z: Cut-resistant type “Z”
SH = 0.80 (Side Steel Breaker)
Super Wide Base 40 / 65 - 39 30PR SW
Ply Rating 1: Standard
Characteristics: 2: Cut-resistant
Rim Diameter (inches)
3: Heat-resistant
Aspect Ratio 65 Series
E: Earthmover Steel breaker Side steel breaker
Section Width (inches) SH = 0.65 Type of Service: G: Grader construction construction
SW D: Loader & Dozer
SH, SW : See Page 3
S: Logging Steel Breaker Bias Tire
170 E 385 / 95 R 24 Steel Breaker Off-the-Road tires feature breaker material which is
Rim Diameter (inches) changed from nylon to steel in order to resist cutting and cut bursting.
Radial Structure Bridgestone Steel Breaker Off-the-Road tires are widely used on loaders
at mining and quarry sites, loaders and shuttle trucks in underground
Aspect Ratio 95 Series mines, and also on log loaders.
Section Width (mm)
Speed Symbol Side Steel Breaker Bias Tire
In this tire the steel breaker extends to the sidewall of the tire to protect
Load Index it against damage. The construction is similar to that described above.

6 GENERAL INFORMATION 7
4.3 Load Index 4.4 Speed Symbol
The LOAD INDEX is an international numerical code for the maximum load a tire can carry at the speed indicated by The SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its load index under
its speed symbol under service conditions specified by Bridgestone. service conditions specified by Bridgestone.

LI kg LI kg LI kg LI kg LI kg LI kg Speed Symbol Speed (km/h) Speed Symbol Speed (km/h)

0 45 50 190 100 800 150 3 350 200 14 000 250 60 000 A1 5 B 50
1 46.2 51 195 101 825 151 3 450 201 14 500 251 61 500 A2 10
2 47.5 52 200 102 850 152 3 550 202 15 000 252 63 000 C 60
A3 15
3 48.7 53 206 103 875 153 3 650 203 15 500 253 65 000 A4 20 D 65
4 50 54 212 104 900 154 3 750 204 16 000 254 67 000 A5 25 E 70
5 51.5 55 218 105 925 155 3 875 205 16 500 255 69 000 A6 30
F 80
6 53 56 224 106 950 156 4 000 206 17 000 256 71 000 A7 35
A8 40 G 90
7 54.5 57 230 107 975 157 4 125 207 17 500 257 73 000
8 56 58 236 108 1 000 158 4 250 208 18 000 258 75 000
9 58 59 243 109 1 030 159 4 375 209 18 500 259 77 500

10 60 60 250 110 1 060 160 4 500 210 19 000 260 80 000

11 61.5 61 257 111 1 090 161 4 625 211 19 500 261 82 500
12 63 62 265 112 1 120 162 4 750 212 20 000 262 85 000
13 65 63 272 113 1 150 163 4 875 213 20 600 263 87 500
4.5 Conversion Table: Star Rating to Ply Rating
14 67 64 280 114 1 180 164 5 000 214 21 200 264 90 000 Star Corresponding Star Corresponding
15 69 65 290 115 1 215 165 5 150 215 21 800 265 92 500 Service Tire Size Service Tire Size
Rating Ply Rating Rating Ply Rating
16 71 66 300 116 1 250 166 5 300 216 22 400 266 95 000 Earthmover 12.00R24
up to 24 Grader 14.00R24
up to 16
17 73 67 307 117 1 285 167 5 450 217 23 000 267 97 500
14.00R24 up to 32 16.00R24 up to 16
18 75 68 315 118 1 320 168 5 600 218 23 600 268 100 000
19 77.5 69 325 119 1 360 169 5 800 219 24 300 269 103 000 14.00R25 up to 32 17.5R25 up to 16
15.5R25 up to 16
16.00R25 up to 36 Loader
17.5R25 up to 16
20 80 70 335 120 1 400 170 6 000 220 25 000 270 106 000 18.00R25 up to 24
20.5R25
21 82.5 71 345 121 1 450 171 6 150 221 25 750 271 109 000 up to 36 up to 24
22 85 72 355 122 1 500 172 6 300 222 26 500 272 112 000
18.00R33 up to 40 up to 28
23 87.5 73 365 123 1 550 173 6 500 223 27 250 273 115 000 21.00R35
up to 44 23.5R25
up to 24
24 90 74 375 124 1 600 174 6 700 224 28 000 274 118 000 40.00R57
up to 74
up to 32
25 92.5 75 387 125 1 650 175 6 900 225 29 000 275 121 000 17.5R25 up to 16 26.5R25 up to 24
26 95 76 400 126 1 700 176 7 100 226 30 000 276 125 000
20.5R25 up to 24 up to 36
27 97 77 412 127 1 750 177 7 300 227 30 750 277 128 000
28 100 78 425 128 1 800 178 7 500 228 31 500 278 132 500

up to 28 29.5R25
up to 28

29 103 79 437 129 1 850 179 7 750 229 32 500 279 136 000 25/65R25 up to 32 up to 34
29.5R29
23.5R25 up to 24 up to 34
35/65R33 up to 36
30 106 80 450 130 1 900 180 8 000 230 33 500 up to 32
31 109 81 462 131 1 950 181 8 250 231 34 500 45/65R45
26.5R25 up to 32 up to 50
32 112 82 475 132 2 000 182 8 500 232 35 500 29.5R25
up to 34
33 115 83 487 133 2 060 183 8 750 233 36 500 29.5R29
up to 40
34 118 84 500 134 2 120 184 9 000 234 37 500 33.25R29
up to 44
35 121 85 515 135 2 180 185 9 250 235 38 750
33.25R35 up to 44
36 125 86 530 136 2 240 186 9 500 236 40 000
37 128 87 545 137 2 300 187 9 750 237 41 250 37.25R35 up to 48
37.5R39
38 132 88 560 138 2 360 188 10 000 238 42 500 up to 52
40.5/75R39
39 136 89 580 139 2 430 189 10 300 239 43 750 up to 54

40 140 90 600 140 2 500 190 10 600 240 45 000 Note: Due to the practice of altering inflation pressure to improve flotation on sand, Bridgestone does not apply a star
41 145 91 615 141 2 575 191 10 900 241 46 250 rating to tire size 21.00R25 VSJ.
42 150 92 630 142 2 650 192 11 200 242 47 500
43 155 93 650 143 2 725 193 11 500 243 48 750
44 160 94 670 144 2 800 194 11 800 244 50 000
45 165 95 690 145 2 900 195 12 150 245 51 500
46 170 96 710 146 3 000 196 12 500 246 53 000
47 175 97 730 147 3 075 197 12 850 247 54 500
48 180 98 750 148 3 150 198 13 200 248 56 000
49 185 99 775 149 3 250 199 13 600 249 58 000

8 GENERAL INFORMATION 9
RADIAL TIRE
1. Tread Designs
4.6 Size Conversion Table ®Earthmover Service
Metric Inch
E2
385/95R24, 25 14.00R24, 25
445/95R24, 25 16.00R24, 25
445/80R25 17.5R25
505/95R25 18.00R25
525/80R25 20.5R25
750/65R25 30/65R25

4.7 Dual Specification Codes

V-STEEL V-STEEL V-STEEL
Some Bridgestone Off-The-Road Tires have dual specification codes which can be used for both services. ULTRA TRACTION K-TRACTION S-BLOCK
(VUT) (VKT) (VSB)
Combination Construction Size Designation

26.5R25 MS* VLT T DE2

Loader & Dozer Service
Radial *1 D2A
*2 E2A
E2
+
Earthmover Service 26.5 – 25 20 VL2 T DE2
Bias D2A
E2A

Loader & Dozer Service 17.5 – 25 12 FG T DG2

+ Bias D2A
Grader Service G2A

Earthmover Service 17.5R25 1 VKT T EG2

+ Radial E2A
Grader Service G2A

V-STEEL V-STEEL V-STEEL

Multiple Star Rating
Bridgestone Radial Tires marked with “LOADER & DOZER (one star)” and “EARTHMOVER (two star)” F-TRACTION H-SERVICE SNOW WEDGE
have specified load capacity on each servicing condition. (VFT) (VHS) (VSW)

Strength of tire casing is designed to constrain inflation pressure used.

<26.5R25 as an example>
Type of Service Star Rating Inflation
Pressure
Load
(Load Index)
Speed
(Speed Symbol)
E3
Loader (one star) 5.00 bar 15,000 kgs 10 km/hour
(202) (A2)
Earthmover (two stars) 5.25 bar 11,500 kgs 50 km/hour
(190) (B)

Description on Tire Sidewall

V-STEEL Wide Base Regular V-STEEL

L-TRACTION V-STEEL M-TRACTION TRACTION-STABILITY
(VLT) (VMT) (VTS)

10 RADIAL TIRE 11
E3 E4

V-STEEL Wide Base Regular V-STEEL 14.00R24~ 21.00R33~ V-STEEL V-STEEL

E-LUG V-STEEL R-LUG ROCK FAST 16.00R25 37.00R57 ROCK E-PREMIUM ROCK DEEP
(VEL) (VRL) (VRF) V-STEEL R-LUG S (VRLS) (VREP) PREMIUM (VRDP)

®Sand Service
E4 E4 E7

L317 V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL

L-TRACTION S N-TRACTION M-TRACTION S M-TRACTION ROCK PREMIUM ROCK QUARRY JAMAL
SERVICE (VRPS) PREMIUM (VRQP) (VSJ)
(VLTS) (VSNT) (VMTS) PREMIUM (VMTP)

®Grader Service
E4 G2 G4

V-STEEL V-STEEL 37.00R57 18.00R25~ 40.00R57 31/90R49 V-STEEL V-STEEL V-STEEL V-STEEL
Z-TRACTION S Z-TRACTION 40.00R57 21.00R35 50/90R57 46/90R57 U-TRACTION K-TRACTION SNOW WEDGE M-TRACTION S
(VZTS) PREMIUM (VZTP) VELSL V-STEEL E-LUG S (VELS) (VUT) (VKT) (VSW) (VMTS)

12 RADIAL TIRE 13
®Loader & Dozer Service ®Mobile Crane Service (High-Speed)
L2 L3

V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL
U-TRACTION K-TRACTION SNOW WEDGE L-TRACTION M-TRACTION G-TRACTION S-BLOCK H-BLOCK HIGHWAY SERVICE SNOW WEDGE
(VUT) (VKT) (VSW) (VLT) (VMT) (VGT) (VSB) (VHB) (VHS) (VSW)

®Industrial Service
L3 L4

V-STEEL V-STEEL TRACTION- V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL CONTAINER
J-TRACTION STABILITY L-TRACTION S N-TRACTION N-LUG H-BLOCK E-LUG CONTAINER CONTAINER HANDLER STABILITY
(VJT) (VTS) (VLTS) (VSNT) (VSNL) (VHB) (VEL) HANDLER HANDLER DEEP AND SAFETY
(VCH) (VCHD) (VCHS)

L5 L5S

V-STEEL V-STEEL V-STEEL SMOOTH V-STEEL V-STEEL V-STEEL V-STEEL

SUPER-DEEP D-LUG TREAD-MS E-LUG S R-LUG S D-LUG SMOOTH TREAD-MS
TRACTION (VSDT) (VSDL) (VSMS) (VELS) (VRLS) (VSDL) (VSMS)

14 RADIAL TIRE 15
2. Application
®Earthmover Service
HEAT RESISTANT CUT RESISTANT

VLT

VSW VMTP VLTS

TRACTION
VFT VKT
VSNT
VMT
L317
VMTS
VSB VZTS
VZTP

ROCK
VRL

VEL VELSL
VHS

VELS/VRLS
VRF VREP VRDP VRPS VRQP

Size Type Star Rating Size Type Star Rating Size Type Star Rating Size Type Star Rating Size Type Star Rating Size Type Star Rating

VUT(E2) VHS(E2) VEL(E3) VSNT(E4) VZTP(E4) VREP(E4)

335/80 R 20 T/L 36.00 R 51 T/L 2 18.00 R 25 T/L 2 26.5 R 25 T/L MS 46/90 R 57 T/L 2 NEW 27.00 R 49 T/L 2
365/80 R 20 T/L 18.00 R 33 T/L 2 29.5 R 25 T/L MS
405/70 R 20 T/L «ÊVSW(E2) 21.00 R 35 T/L 2 29.5 R 29 T/L MS VELSL(E4) VRDP(E4)
20.5 R 25 T/L MS 24.00 R 35 T/L 2 35/65 R 33 T/L MS 37.00 R 57 T/L 2 27.00 R 49 T/L 2
VKT(E2) 23.5 R 25 T/L MS 40.00 R 57 T/L 2 33.00 R 51 T/L 2
14.00 R 24 T/T 3 VRL(E3) VMTS(E4) 42/90 R 57 T/L 2
17.5 R 25 T/L 1 VLT(E3) 29.5 R 35 T/L 2 14.00 R 24 T/T 3 VELS(E4)
40.00 R 57 T/L 2
18.00 R 25 T/L 2 20.5 R 25 T/L MS 33.25 R 35 T/L 2 14.00 R 25 T/L 3 18.00 R 25 T/L 2 46/90 R 57 T/L 2
25/65 R 25 T/L 2 23.5 R 25 T/L MS 37.25 R 35 T/L 2 16.00 R 25 T/L 2 18.00 R 33 T/L 2 53/80 R 63 T/L 2
29.5 R 25 T/L 2 750/65(30/65) R 25 T/L MS 40.5/75 R 39 T/L 2 18.00 R 25 T/L 2 21.00 R 35 T/L 2
29.5 R 29 T/L 2 26.5 R 25 T/L MS 27.00 R 49 T/L 2 18.00 R 33 T/L 2 31/90 R 49 T/L 2 VRPS(E4)
37.5 R 39 T/L 2 29.5 R 25 T/L MS 24.00 R 35 T/L 2 40.00 R 57 T/L 2 NEW 33.00 R 51 T/L 2
VRF(E3) 46/90 R 57 T/L 2 40.00 R 57 T/L 2
33.25 R 29 T/L 2 27.00 R 49 T/L 2
VSB(E2) 37.25 R 35 T/L 2 53/80 R 63 T/L 2 50/90 R 57 T/L 2 46/90 R 57 T/L 2
14.00 R 24 T/T 3 40.5/75 R 39 T/L 2 59/80 R 63 T/L 2 VMTP(E4) 50/90 R 57 T/L 2
14.00 R 25 T/L 3 12.00 R 24 T/T 3 VRLS(E4)
L317(E4) 53/80 R 63 T/L 2
VTS(E3) 18.00 R 33 T/L 2 14.00 R 24 T/T 3 59/80 R 63 T/L 2
VFT(E2) 11.00 R 20 T/T 3 14.00 R 25 T/L 3
875/65 R 29 T/L MS 21.00 R 33 T/L 2
18.00 R 33 T/L 2 12.00 R 20 T/T 3 16.00 R 25 T/L 2 VRQP(E4)
21.00 R 35 T/L 2
24.00 R 49 T/L 2 VMT(E3) 12 R 22.5 T/L 3 21.00 R 33 T/L 2 18.00 R 33 T/L 2
24.00 R 35 T/L 2
27.00 R 49 T/L 2 12.00 R 24 T/T 3 T/T 2 24.00 R 35 T/L 2
17.5 R 25 T/L 2 24.00 R 49 T/L 2
23.5 R 25 T/L 2 VLTS(E4) 27.00 R 49 T/L 2 24.00 R 35 T/L 2
29.5 R 25 T/L 2 33.00 R 51 T/L 2 24.00 R 49 T/L 2
20.5 R 25 T/L MS
30.00 R 51 T/L 2 27.00 R 49 T/L 2
23.5 R 25 T/L MS
33.00 R 51 T/L 2 VZTS(E4) 30.00 R 51 T/L 2
750/65(30/65) R 25 T/L 2
40.00 R 57 T/L 2 37.00 R 57 T/L 2 33.00 R 51 T/L 2
26.5 R 25 T/L 2
T/T: Tube Type T/L: Tubeless Type 40.00 R 57 T/L 2 36.00 R 51 T/L 2
MS: Multiple Star Rating
29.5 R 25 T/L 2
37.00 R 57 T/L 2
NEW 875/65 R 29 T/L MS
« VSW is especially designed for snow surface operations.
T/T: Tube Type T/L: Tubeless Type
MS: Multiple Star Rating
16 RADIAL TIRE 17
® Grader Service ® Loader & Dozer Service
HEAT RESISTANT CUT RESISTANT HEAT RESISTANT CUT RESISTANT

VUT VLT

TRACTION

TRACTION
VUT
VSW
VKT

VSW
VKT
VJT VMT VTS
VMTS VLTS VSNT VSDT

ROCK

ROCK
VSNL VSDL
VSMS
Size Type Star Rating Size Type Star Rating Size Type Star Rating Size Type Star Rating

VUT(G2) VUT(L2) VMT(L3) VSDT(L5)

13.00 R 24 TG T/L 1 335/80 R 20 T/L 17.5 R 25 T/L 12 23.5 R 25 T/L 12
14.00 R 24 TG T/L 1 365/80 R 20 T/L 20.5 R 25 T/L 1 26.5 R 25 T/L 12
405/70 R 20 T/L 23.5 R 25 T/L 1 29.5 R 25 T/L 12
15.5 R 25 T/L 12
15.5 R 25 T/L 12 26.5 R 25 T/L 12 29.5 R 29 T/L 12
17.5 R 25 T/L 1 17.5 R 25 T/L 1 29.5 R 25 T/L 1 35/65 R 33 T/L 12 NEW
20.5 R 25 T/L 1 20.5 R 25 T/L 1
VJT(L3) VSDL(L5)
23.5 R 25 T/L 1 23.5 R 25 T/L 1
NEW 17.5 R 25 T/L 1 8.25 R 15 T/T 2
VKT(G2) VKT(L2) 20.5 R 25 T/L 1 10.00 R 15 T/T 2
14.00 R 24 TG T/L 1 23.5 R 25 T/L 1 14.5 R 15 T/L 2
14.00 R 24 TG T/L 1 15.5 R 25 T/L 1 26.5 R 25 T/L 1 12.00 R 20 T/T 2
16.00 R 24 TG T/L 1 17.5 R 25 T/L 1 NEW 29.5 R 25 T/L 1 15.5 R 25 T/L 1
17.5 R 25 T/L 1 20.5 R 25 T/L 1 17.5 R 25 T/L 12
VTS(L3)
23.5 R 25 T/L 1 20.5 R 25 T/L 12
«ÊVSW(G2) 550/65 R 25 T/L 1 23.5 R 25 T/L 12
26.5 R 25 T/L 12
650/65 R 25 T/L 1 26.5 R 25 T/L 12
14.00 R 24 TG T/L 13 750/65 R 25 T/L 1
«ÊVSW(L2) 29.5 R 25 T/L 12
16.00 R 24 TG T/L 1 775/65 R 29 T/L 1
14.00 R 24 TG T/L 1 29.5 R 29 T/L 12
17.5 R 25 T/L 1 17.5 R 25 T/L 1
875/65 R 29 T/L 1 35/65 R 33 T/L 12
20.5 R 25 T/L MS VLTS(L4) 45/65 R 39 T/L 1
VMTS(G4)
23.5 R 25 T/L MS 20.5 R 25 T/L MS 45/65 R 45 T/L 12
14.00 R 24 TG T/L 1 NEW 600/65 R 25 T/L 1 50/65 R 51 T/L 2
23.5 R 25 T/L MS
NEW 875/65 R 29 T/L MS 55.5/80 R 57 T/L
VLT(L3) 60/80 R 57 T/L
20.5 R 25 T/L MS VSNT(L4)
« VSW is especially designed for snow surface operations. VSMS(L5S)
23.5 R 25 T/L MS 26.5 R 25 T/L MS 2
750/65(30/65) R 25 T/L MS 9.00 R 20 T/T 2
29.5 R 25 T/L MS 2
26.5 R 25 T/L MS 12.00 R 20 T/T 2
29.5 R 29 T/L MS 2
T/T: Tube Type 29.5 R 25 T/L MS 12.00 R 24 T/T 2
35/65 R 33 T/L MS 2
T/L: Tubeless Type 14.00 R 24 T/T 2
TG: For Semi-Drop Center Rim VSNL(L4) 17.5 R 25 T/L 12
T/T: Tube Type 14.00 R 20 T/T 2 18.00 R 25 T/L 12
T/L: Tubeless Type
35/65 R 33 T/L 2 26.5 R 25 T/L 12
MS: Multiple Star Rating
TG: For Semi-Drop Center Rim 45/65 R 45 T/L 2 29.5 R 29 T/L 2

« VSW is especially designed for snow surface operations.

18 RADIAL TIRE 19
® Mobile Crane Service (High-Speed) ® Industrial Service
ON ROAD OFF ROAD

VHB VCHS
14.00 R 24 T/T 3 12.00 R 20 T/T 3
16.00 R 25 T/L 2 NEW 12.00 R 24 T/T
18.00 R 25 T/L 3 14.00 R 24 T/T 3
VGT 14.00 R 24 TG T/L 3
18.00 R 25 T/L 3

TRACTION
18.00 R 33 T/L 3
VEL

VSB
VEL
18.00 R 25 T/L 3

VHB VELS
18.00 R 33 T/L 3
VSW VHS

Size Type Size Type Size Type

VCH
VGT VHB «ÊVSW
12.00 R 20 T/T 3
24 R 21 T/L 170E 385/95 R 24 170E 385/95 R 25 12.00 R 24 T/T 2
T/T T/L VRLS
170E 445/80 R 25 (14.00R24) (14.00R25) 14.00 R 24 T/T 3
T/L 16.00 R 25 T/L 2
(17.5R25) 177E 445/95 R 25 177E 445/95 R 25
T/L T/L
(16.00R25) (16.00R25)
VSB
186E 505/95 R 25
170E 385/95 R 24 T/L
T/T (18.00R25)
(14.00R24)
170E 385/95 R 25 VHS
T/L VCHD
(14.00R25) 170E 385/95 R 24
T/T 16.00 R 25 T/L 2 VSDL
(14.00R24)
23.5 R 25 T/L 2
170E 385/95 R 25 35/65 R 33 T/L 2
T/L
(14.00R25)
170F 385/95 R 25
T/L
(14.00R25)
177E 445/95 R 25
T/L
(16.00R25)
174F 445/95 R 25
T/L VSMS
(16.00R25)
186E 505/95 R 25
® Sand Service 18.00 R 25 T/L 2
T/L
(18.00R25)
179E 525/80 R 25
T/L
(20.5R25)

« VSW is especially designed for snow surface operations. VSJ(E7)

16.00 R 20 T/T 28 T/T: Tube Type
T/T: Tube Type 21.00 R 25 T/L T/L: Tubeless Type
T/L: Tubeless Type TG: For Semi-Drop Center Rim

20 RADIAL TIRE 21
3. Technical Data
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
15" 15"
8.25R15 VSDL 2 L5 D2A - - 880 248 405 285 48.0 - 6.50T kPa 400 425 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825

8.25R15
34.6 9.8 15.9 11.2 - psi 58 62 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115 120
VSDL Loader 2
10 kg 2200 2275 2350 2425 2500 2575 2650 2725 2800 2875 2950 3025 3100
5 lbs 4860 5020 5200 5360 5540 5700 5860 6000 6200 6350 6500 6650 6800

14.5R15 10.00R15
10.00R15 VSDL 2 L5 D2A - - 905 287 416 330 48.0 - 7.50V VSDL 2
35.6 11.3 16.4 13.0 - kg 2875 2975 3075 3175 3275 3375 3475 3575 3650 3750 3850 3950 4025
lbs 6350 6550 6800 7000 7200 7450 7650 7850 8050 8250 8500 8700 8900
14.5R15 VSDL 2 L5 D2A - - 899 359 413 412 48.0 - 11.00/1.5 VSDL 2
Tubeless 35.4 14.1 16.3 16.2 - kg 2425 2550 2650 2775 2875 2975 3100 3200 3300 3400 3500
lbs 5360 5620 5860 6100 6350 6600 6800 7050 7250 7500 7700
20" 20"
2

11.00R20 9.00R20
9.00R20 VSMS L5S D2A - - 1054 260 474 303 51.0 - 7.00T VSMS Loader 2
41.5 10.2 18.7 11.9 10 kg 3075 3250 3350 3450 3550 3650 3750 3875 4000 4000 4125 4250 4375
5 lbs 6800 7150 7400 7600 7850 8050 8250 8550 8800 8800 9100 9350 9650
11.00R20 L317 3 E4 - 188 129 1107 290 512 325 25.0 335 8.00V L317 E/M
E4 3
43.6 11.4 20.2 12.8 13.2 50 kg 2500 2600 2710 2810 2910 3010 3100 3200 3300 3390 3480 3570 3670 3760
30 lbs 5510 5730 5970 6200 6420 6640 6830 7050 7280 7470 7670 7880 8080 8290
12.00R20 L317 3 E4 - 208 142 1146 308 523 346 25.0 384 8.50V L317 E4 3
45.1 12.1 20.6 13.6 15.1 kg 2770 2880 2990 3110 3220 3330 3430 3540 3650 3750 3850 3950 4060 4160
lbs 6110 6350 6590 6860 7100 7340 7560 7800 8050 8270 8490 8720 8940 9170
VSDL 2 L5 D2A - - 1168 320 538 359 57.0 - VSDL Loader 2
46.0 12.6 21.2 14.1 - VSMS 10 kg 4375 4500 4625 4875 5000 5150 5300 5450 5600 5800 5800 6000 6150
5 lbs 9650 9900 10200 10700 11000 11400 11700 12000 12300 12800 12800 13200 13600

12.00R20
VSMS 2 L5S D2A - - 1173 312 540 351 57.0 -
46.2 12.3 21.3 13.8 -

VCH 3 Industrial IDU - - VCH IDU

Service VCHS
See characteristics page 46 See characteristics page 47
VCHS 176A5 3 Industrial IDU - -
Service

16.00R20 14.00R20
14.00R20 VSNL 2 L4 D2A - - 1196 360 550 414 34.0 - 10.00WI VSNL Loader 2
47.1 14.2 21.7 16.3 - 10 kg 5200 5400 5550 5750 5900 6100 6250 6450 6600 6800 6950 7100 7300
5 lbs 11400 11900 12300 12600 13000 13400 13800 14200 14600 15000 15300 15700 16100
16.00R20 VSJ 28 E7 - - - VSJ Sand
See characteristics page 50 See characteristics page 51

335/80R20 VUT 136B E2 DE2 - - 1036 319 463 357 19.0 - 11x20 kPa 275 300 325 350 375

335/80R20
Tubeless 147A2 L2 40.8 12.6 18.2 14.1 - psi 40 44 47 51 54
VUT Loader
L2
10 kg 2430 2575 2725 2900 3075
5 lbs 5350 5700 6000 6400 6800

405/70R20 365/80R20
365/80R20 VUT 141B E2 DE2 - - 1087 347 483 389 21.0 - 11x20 VUT L2
Tubeless 153A2 L2 42.8 13.7 19.0 15.3 - kg 2900 3075 3250 3450 3650
lbs 6400 6800 7150 7600 8000
405/70R20 VUT 143B E2 DE2 - - 1092 398 485 446 20.0 - 13x20 VUT L2
Tubeless 155A2 L2 43.0 15.7 19.1 17.6 - kg 3075 3250 3450 3650 3875
lbs 6800 7250 7600 8100 8550
21" 21"

24R21
24R21 VGT Mobile Crane - 520 356 VGT High-
Service See characteristics page 48 Speed See characteristics page 49
Tubeless
22.5" 22.5"
12R22.5 L317 3 E4 - 188 129 1109 292 517 327 25.0 343 9.00 kPa 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 815

12R22.5
Tubeless 43.7 11.5 20.4 12.9 13.5 psi 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115 118
L317 E/M 3
50 kg 2410 2510 2610 2700 2800 2890 2990 3080 3170 3260 3350 3440 3530 3620 3690 3760
30 lbs 5310 5530 5750 5950 6170 6370 6590 6790 6990 7190 7390 7580 7780 7980 8140 8290
For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
22 5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8. RADIAL TIRE 23
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
24" 24"
12.00R24 L317 3 E4 - 177 121 1254 319 577 355 31.5 391 8.50V kPa 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825
49.4 12.6 22.7 14.0 15.4 psi 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115 120
L317 E/M 3
VMTP 3 E4 E2A 136 93 1256 319 577 355 31.5 391 VMTP 50 kg 3050 3180 3300 3430 3550 3670 3790 3900 4020 4140 4250
49.4 12.6 22.7 14.0 15.4 30 lbs 6720 7010 7280 7560 7830 8090 8360 8600 8860 9130 9370

12.00R24
VSMS 2 L5S D2A - - 1275 312 573 364 57.0 - VSMS Loader 2
50.2 12.3 22.6 14.3 - 10 kg 4875 5150 5300 5450 5600 5800 6000 6150 6300 6500 6500 6700 6900
5 lbs 11000 11400 11700 12000 12300 12800 13200 13600 13900 14300 14300 14700 15200
VCH 2 Industrial IDU - - VCH IDU
Service VCHS
New See characteristics page 46 See characteristics page 47
VCHS Industrial IDU - -
Service

13.00R24 TG VUT 1 G2 G2A - - 1290 357 585 380 25.0 - 8.00TG kPa 200 225 250 275 300 325 350 375

13.00R24 TG
Tubeless 50.8 14.1 23.0 15.0 - psi 29 33 36 40 44 47 51 54
VUT Grader 1
40 kg 1850 2000 2180 2360 2500 2650 2800 3000
25 lbs 4080 4400 4800 5200 5520 5840 6150 6600
14.00R24 VKT 3 E2 E2A 106 73 1351 390 612 442 25.0 450 10.00W kPa 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800
53.2 15.4 24.1 17.4 17.7 psi 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115
VKT E/M 3
VSB 3 E2 E2A 179 123 1365 390 628 433 21.0 450 VSB 50 kg 4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050
53.7 15.4 24.7 17.0 17.7 VMTS 30 lbs 8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400
VRLS
VHB 3 Industrial - - -
Service See characteristics page 46

VMTS 3 E4 E2A 91 62 1400 386 642 428 38.0 450 10.00W

E1A 119 82 55.1 15.2 25.3 16.9 17.7

14.00R24
VRLS 3 E4 E2A 85 58 1403 390 644 432 39.0 450
55.2 15.4 25.4 17.0 17.7

VSMS 2 L5S D2A - - 1394 390 634 437 72.0 - VSMS Loader 2
54.8 15.4 25.0 17.2 - 10 kg 5950 6200 6450 6700 6950 7200 7450 7700 7950 8200 8450 8700 8950 9200 9500
5 lbs 13120 13700 14220 14800 15300 15900 16400 16980 17500 18080 19600 19180 19690 20680 20900
VCH 3 Industrial IDU - - VHB IDU
Service VCH
VCHS
See characteristics page 46 See characteristics page 47
VCHS 196A5 3 Industrial IDU - -
Service

14.00R24 TG VKT 1 G2 G2A - - 1351 370 612 422 25.0 - 8.00TG kPa 200 225 250 275 300 325 350 375 525 550
Tubeless L2 D2A - - 53.2 14.6 24.1 16.6 - psi 29 33 36 40 44 47 51 54 76 80
VKT Grader 1 3 VSW=Consult a Bridgestone Representative.
VUT 1 G2 G2A - - 1354 373 611 420 25.5 - VUT 40 kg 2240 2430 2650 2800 3000 3250 3350 3650

14.00R24 TG
53.3 14.7 24.1 16.5 - VSW 25 lbs 4940 5360 5840 6150 6600 7150 7400 8050

VSW 3 G2 - - - 1351 390 594 446 23.5 - 10.00VA VKT Loader 1

53.2 15.4 23.4 17.6 - VSW 10 kg 6700 6900
5 lbs 14800 15200
153A8 1 DG2 370 426 8.00TG
175A2 L2 14.6 16.8

24 RADIAL TIRE 25
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
14.00R24 TG VMTS 1 G4 G2A 1400 373 TBA TBA 38.0 - 8.00TG kPa 200 225 250 275 300 325 350 375
Tubeless 55.1 14.7 TBA TBA - psi 29 33 36 40 44 47 51 54

14.00R24 TG
VMTS Grader 1
40 kg 2240 2430 2650 2800 3000 3250 3350 3650
25 lbs 4940 5360 5840 6150 6600 7150 7400 8050
VCHS 196A5 3 Industrial IDU - - VCHS IDU
Service See characteristics page 46 See characteristics page 47

385/95R24 VSB Logging - - 1365 390 628 433 21.0 450 10.00W kPa 450 480 520 550 590 620 660 690 720 760 790

385/95R24 (14.00R24)
(14.00R24) 170E Mobile Crane 53.7 15.4 24.7 17.0 17.7 psi 65 70 75 80 85 90 95 100 105 110 115
Service VSB Logging Load J L
VHB 170E Mobile Crane - - - Range (18PR) (20PR)
Service kg 3700 3910 4110 4310 4500 4690 4870 5150 5300 5450 5600 Maximum Speed = 88km/h (55mph)
lbs 8150 8620 9070 9500 9930 10340 10730 11400 11700 12000 12300
See characteristics page 48
VHS 170E Mobile Crane - - - VSB High-
Service VHB Speed See characteristics page 49
VHS
16.00R24 TG VKT 1 G2 G2A - - 1473 418 675 470 28.5 - 10.00VA kPa 200 225 250 275 300 325 350 375

16.00R24 TG
Tubeless 58.0 16.5 26.6 18.5 - psi 29 33 36 40 44 47 51 54
VKT Grader 1
VSW 1 G2 - - - 1485 417 680 467 22.5 - VSW 40 kg 2900 3150 3350 3650 3875 4125 4375 4625
58.5 16.4 26.8 18.4 - 25 lbs 6400 6950 7400 8050 8550 9100 9650 10200

25" 25"
14.00R25 VSB 3 E2 E2A 179 123 1365 390 628 433 21.0 450 10.00/1.5 kPa 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800
Tubeless 53.7 15.4 24.7 17.0 17.7 psi 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115
VSB E/M 3

14.00R25
VMTS 3 E4 E2A 91 62 1406 389 650 435 38.0 450 VMTS 50 kg 4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050
- - - 55.4 15.3 25.6 17.1 17.7 VRLS 30 lbs 8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400
E3A 136 93
VRLS 3 E4 E2A 85 58 1403 389 650 435 39.0 450
55.2 15.3 25.6 17.1 17.7

385/95R25 VSB Logging - - - 1365 390 628 433 21.0 450 10.00/1.5 kPa 450 480 520 550 590 620 660 690 720 760 790

385/95R25 (14.00R25)
(14.00R25) 170E Mobile Crane 53.7 15.4 24.7 17.0 17.7 psi 65 70 75 80 85 90 95 100 105 110 115
Tubeless Service VSB Logging Load J L
VHS 170E Mobile Crane - - - Range (18PR) (20PR)
170F Service kg 3700 3910 4110 4310 4500 4690 4870 5150 5300 5450 5600 Maximum Speed = 88km/h (55mph)
lbs 8150 8620 9070 9500 9930 10340 10730 11400 11700 12000 12300
See characteristics page 48
VSW 170E Mobile Crane - - - VSB High-
Service VHS Speed See characteristics page 49
VSW
15.5R25 VUT 2 G2, L2 DG2 - - 1269 383 559 436 27.0 - 12.00/1.3 kPa 400 425 450 475 500 525 550 575 600 625 650
Tubeless 1 50.0 15.1 22.0 17.2 - psi 58 62 65 69 73 76 80 83 87 91 94
VUT Loader 1 2
VKT 1 L2 D2A - - 1275 392 570 445 23.5 - VKT 10 kg 5000 5150 5450 5600 5800 6150 6300 6500 6700 6900 7100

15.5R25
50.2 15.4 22.4 17.5 - VSDL 5 lbs 11000 11400 12000 12300 12800 13600 13900 14300 14800 15200 15700
kPa 125 150 175 200 225 250 275 300
VSDL 1 L5 D2A - - 1329 392 606 443 64.0 - psi 18 22 25 29 33 36 40 44
52.3 15.4 23.9 17.4 - VUT Grader 1 For slope and ditching service, inflation pressures should be increased by 100kPa
(15psi) with no increase in load rating.
40 kg 1550 1750 2000 2180 2360 2575 2800 3000 For extreme conditions, consult a Bridgestone Representative for additional
25 lbs 3420 3860 4400 4800 5200 5680 6150 6600 recommended operating requirements.
16.00R25 VMTS 2 E4 E2A 123 84 1535 450 696 507 45.0 513 11.25/2.0 kPa 450 475 500 525 550 575 600 625 650 675 700
Tubeless 60.4 17.7 27.4 20.0 20.2 psi 65 69 73 76 80 83 87 91 94 98 102

16.00R25
VMTS E/M 2
VRLS 2 E4 E2A 112 77 1531 448 697 510 45.0 513 VRLS 50 kg 5150 5450 5600 5800 6000 6300 6500 6700 6900 7100 7300
E1A 146 100 60.3 17.6 27.4 20.1 20.2 30 lbs 11400 12000 12300 12800 13200 13900 14300 14800 15200 15700 16100

For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.
26 RADIAL TIRE 27
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
16.00R25 VHB 2 Industrial IDU - - VHB IDU
Tubeless Service VCHD
VRLS

16.00R25
VCHD 2 Industrial IDU - -
Service See characteristics page 46 See characteristics page 47

VRLS 2 Industrial IDU - -

Service

445/95R25 VHB 177E Mobile Crane - - - VHB High-

445/95R25 (16.00R25)
(16.00R25) Service VHS Speed
Tubeless VSW
VHS 177E Mobile Crane - - -
174F Service See characteristics page 48 See characteristics page 49

VSW 177E Mobile Crane - - -

Service

17.5R25 VKT 1 E2 EG2 95 65 1339 440 600 490 27.0 - 14.00/1.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
Tubeless G2 - - 52.7 17.3 23.6 19.3 - psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
L2 D2A - - VKT E/M 1 2
VUT 1 G2, L2 DG2 - - 1340 444 586 500 28.0 - VMT 50 kg 3350 3550 3750 4000 4125 4375 4625 4750 5000 5150 5450
52.8 17.5 23.1 19.7 - 30 lbs 7400 7850 8250 8800 9100 9650 10200 10500 11000 11400 12000

VSW 153A8 1 G2 DG2 - - 1340 440 597 480 27.0 - VUT Loader 1 2
176A2 L2 52.8 17.3 23.5 18.9 - VKT 10 kg 6000 6150 6500 6700 7100 7300 7500 7750 8000 8250 8500
VSW 5 lbs 13200 13600 14300 14800 15700 16100 16500 17100 17600 18200 18700
2

17.5R25
VMT E3 E1A 144 99 1352 443 600 514 30.0 - VMT
L3 D2A - - 53.2 17.4 23.6 20.2 - VJT
New
1 VSDL
VJT 176A2 1 L3 D2A - - 1352 443 TBA TBA 30.0 - VSMS
53.2 17.4 TBA TBA -
kPa 125 150 175 200 225 250 275 300
VSDL 2 L5 D2A - - 1400 440 639 495 68.0 - psi 18 22 25 29 33 36 40 44
1 55.1 17.3 25.2 19.5 - VUT Grader 1 For slope and ditching service, inflation pressures should be increased by 100kPa
(15psi) with no increase in load rating.
VKT 40 kg 1850 2120 2360 2650 2900 3075 3350 3650 For extreme conditions, consult a Bridgestone Representative for additional
VSMS 2 L5S D2A - - 1374 440 623 487 68.5 - VSW 25 lbs 4080 4680 5200 5840 6400 6800 7400 8050 recommended operating requirements.
1 54.1 17.3 24.5 19.2 -

445/80R25
VGT High-

(17.5R25)
445/80R25 VGT 170E Mobile Crane - - -
(17.5R25) Service See characteristics page 48 Speed See characteristics page 49
Tubeless
18.00R25 VKT 2 E2 E1A 239 164 1610 510 733 571 31.0 587 13.00/2.5 kPa 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825
Tubeless 63.4 20.1 28.9 22.5 23.1 psi 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115 120
VKT E/M 2
VEL 2 E3 E2A 181 124 1605 506 729 580 34.0 587 VEL 50 kg 6700 7100 7300 7500 7750 8000 8250 8500 8750 9000 9250
63.2 19.9 28.7 22.8 23.1 VMTS 30 lbs 14800 15700 16100 16500 17100 17600 18200 18700 19300 19800 20400
VELS

18.00R25
3 Industrial - - - VEL IDU
Service See characteristics page 46

VMTS 2 E4 E2A 169 116 1649 514 754 571 51.0 587 13.00/2.5
64.9 20.2 29.7 22.5 23.1 See characteristics page 47

VELS 2 E4 E2A 144 99 1638 515 744 580 50.0 587

E1A 179 123 64.5 20.3 29.3 22.8 23.1

28 RADIAL TIRE 29
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
18.00R25 VSMS 2 L5S D2A - - 1675 512 733 592 84.5 - 13.00/2.5 kPa 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825
Tubeless 1 65.9 20.2 28.9 23.3 - psi 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115 120
VSMS Loader 1 2
10 kg 11200 11800 12150 12500 12850 13200 13600 14000 14500 15000 15000 15500 16000
5 lbs 24700 26000 26800 27600 28300 29100 30000 30900 32000 33100 33100 34200 35300
2 Industrial - - - VSMS IDU

18.00R25
Service VHB
VCHS
VHB 3 Industrial IDU - -
Service See characteristics page 46 See characteristics page 47

VCHS 214A5 3 Industrial IDU - -

Service

505/95R25 (18.00R25)
505/95R25 VHB 186E Mobile Crane - - - VHB High-
(18.00R25) Service VHS Speed
Tubeless
See characteristics page 48 See characteristics page 49
VHS 186E Mobile Crane - - -
Service

20.5R25 VKT 1 L2 D2A - - 1470 530 644 597 30.5 - 17.00AL/1.7(1only) kPa 275 300 325 350 375 400 425 450 475 500 525
Tubeless 57.9 20.9 25.4 23.5 - 17.00/2.0 psi 40 44 47 51 54 58 62 65 69 73 76
VSW E/M 1 2
VSW MS E2, L2 DE2 - - 1470 530 640 603 30.5 - VLT 50 kg 4375 4750 5000 5300 5600 5800 6150 6500 6700 6900 7300
57.9 20.9 25.2 23.7 - VLTS 30 lbs 9650 10500 11000 11700 12300 12800 13600 14300 14800 15200 16100

kPa 125 150 175 200 225 250 275 300

psi 18 22 25 29 33 36 40 44
VUT 1 G2, L2 DG2 - - 1473 533 643 608 30.5 - VUT Grader 1
58.0 21.0 25.3 23.9 - 40 kg 2430 2800 3150 3450 3875 4125 4375 4625
25 lbs 5360 6150 6950 7600 8550 9100 9650 10200
VLT 177B MS E3 DE2 149 102 1495 533 676 586 40.0 -

20.5R25
For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
186A2 L3 - - 58.9 21.0 26.6 23.1 - For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.

VMT 1 L3 D2A - - 1480 530 652 597 33.0 -

58.3 20.9 25.7 23.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
VJT 186A2 1 L3 D2A - - 1480 530 652 597 33.0 - VUT Loader 1 2
58.3 20.9 25.7 23.5 - VKT 10 kg 8000 8250 8750 9000 9500 9750 10000 10300 10900 11200 11500
VSW 5 lbs 17600 18200 19300 19800 20900 21500 22000 22700 24000 24700 25400
VLTS 177B MS E4 DE2 126 86 1478 530 667 581 49.0 - VLT
186A2 L4 - - 58.2 20.9 26.3 22.9 - VMT
VJT
VSDL 2 L5 D2A - - 1552 531 704 583 78.0 - VLTS
1 61.1 20.9 27.7 23.0 - VSDL

525/80R25
VHS High-

21.00R25 (20.5R25)
525/80R25 VHS 179E Mobile Crane - 308 211
(20.5R25) Service See characteristics page 48 Speed See characteristics page 49
Tubeless
21.00R25 VSJ E7 - - - VSJ Sand
Tubeless See characteristics page 50 See characteristics page 51

30 RADIAL TIRE 31
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
23.5R25 VKT 1 L2 D2A - - 1602 612 690 686 33.0 - 19.50/2.5 kPa 275 300 325 350 375 400 425 450 475 500 525
Tubeless 63.1 24.1 27.2 27.0 - psi 40 44 47 51 54 58 62 65 69 73 76
VSW E/M 1 2
VSW MS E2, L2 DE2 - - 1596 620 692 689 31.5 - VLT 50 kg 5600 6000 6500 6700 7100 7500 7750 8250 8500 9000 9250
62.8 24.4 27.2 27.1 - VMT 30 lbs 12300 13200 14300 14800 15700 16500 17100 18200 18700 19800 20400
VLTS
VUT 1 G2, L2 DG2 - - 1599 620 702 688 33.5 -
63.0 24.4 27.6 27.1 -

VLT 185B MS E3 DE2 190 130 1623 616 734 680 42.5 - kPa 125 150 175 200 225 250 275 300
195A2 L3 - - 63.9 24.3 28.9 26.8 - psi 18 22 25 29 33 36 40 44
VUT Grader 1
VMT 2 E3 E2A 190 130 1600 617 702 688 35.0 - 40 kg 3150 3550 4000 4500 4875 5300 5600 6000
1

23.5R25
L3 D2A - - 63.0 24.3 27.6 27.1 - 25 lbs 6950 7850 8800 9900 10700 11700 12300 13200
For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
VJT 195A2 1 L3 D2A - - 1602 616 696 695 35.0 - For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.
63.1 24.3 27.4 27.4 - kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
VLTS 185B MS E4 DE2 161 110 1616 612 729 675 54.0 - VUT Loader 1 2
195A2 L4 - - 63.6 24.1 28.7 26.6 - VKT 10 kg 10300 10600 11200 11500 12150 12500 12850 13200 13600 14000 14500
VSW 5 lbs 22700 23400 24700 25400 26800 27600 28300 29100 30000 30900 32000
VSDT 201A2 2 L5 D2A - - 1660 621 745 680 79.0 - VLT
195A2 1 65.4 24.4 29.3 26.8 - VMT
VJT
VSDL 2 L5 D2A - - 1672 608 755 677 87.0 - VLTS
1 65.8 23.9 29.7 26.7 - VSDT
VSDL
2 Industrial IDU - - VSDL IDU
See characteristics page 46 See characteristics page 47
Service

750/65R25 (30/65R25) 650/65R25 600/65R25 550/65R25 25/65R25

25/65R25 VKT 2 E2 E2A 162 111 1486 635 670 690 30.5 - 20.00/2.0 VKT E/M 2
Tubeless 58.5 25.0 26.4 27.2 - 50 kg 5600 6000 6300 6700 7100 7450 7750
30 lbs 12350 13200 13850 14800 15600 16350 17100
550/65R25 VTS 1 L3 D2A - - 1350 547 594 605 32.5 - (14.00/1.5) VTS Loader 1
Tubeless 53.1 21.5 23.4 23.8 - 17.00/2.0 10 kg 7500 7750 8250 8500
New 5 lbs 16500 17100 18200 18700
600/65R25 VSW 187A2 1 L3 D2A - - 1424 606 TBA TBA 31.5 - (17.00/1.7, 17.00/2.0) VSW 1
Tubeless 56.0 23.9 TBA TBA - 19.50/2.5 kg 8750 9000 9500 9750
lbs 19300 19800 20900 21500
650/65R25 VTS 1 L3 D2A - - 1502 642 660 710 37.0 - 19.50/2.5 VTS 1
Tubeless 59.1 25.3 26.0 28.0 - kg 10000 10600 10900 11500
lbs 22000 23400 24000 25400
750/65R25 VLT 190B MS E3 DE2 225 154 1625 765 718 831 43.0 - (22.00/3.0) VLT E/M 2
(30/65R25) 202A2 L3 - - 64.0 30.1 28.3 32.7 - 24.00/3.0 VLTS 50 kg 6900 7300 7750 8250 8750 9250 9750 10300 10600
Tubeless 30 lbs 15200 16100 17100 18200 19300 20400 21500 22700 23400
VTS 1 L3 D2A - - 1607 745 701 833 41.0 - VLT Loader 1
63.3 29.3 27.6 32.8 - VTS 10 kg 13200 13600 14500 15000
5 lbs 29100 30000 32000 33100
VLTS 190B 2 E4 E2A 195 134 1623 765 713 832 55.0 -
63.9 30.1 28.1 32.8 -
26.5R25 VKT 2 L2 D2A - - 1732 677 756 772 39.0 - 22.00/3.0 VLT E/M 1 2
Tubeless 1 68.2 26.7 29.8 30.4 - 50 kg 7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500
30 lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400

26.5R25
VLT 193B MS E3 DE2 220 151 1755 678 787 736 45.0 -
202A2 L3 - - 69.1 25.7 31.0 29.0 - VKT Loader 1 2
VLT 10 kg 12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500
VMT 2 L3 D2A - - 1735 684 754 766 38.0 - VMT 5 lbs 28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800
1 68.3 26.9 29.7 30.2 -

For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.
32 RADIAL TIRE 33
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
New
26.5R25 VJT 202A2 1 L3 D2A - - 1737 682 754 766 38.0 - 22.00/3.0 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
Tubeless 68.4 26.9 29.7 30.2 - psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
VLTS E/M 1 2
VLTS 193B 2 E4 E2A 186 127 1736 675 784 743 60.0 - VSNT 50 kg 7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500
68.3 26.6 30.9 29.3 - 30 lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400

VSNT MS E4 DE2 165 113 1779 685 799 740 57.5 - VJT Loader 1 2
L4 - - 70.0 27.0 31.5 29.1 - VSNT 10 kg 12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500

26.5R25
2 D2A VSDT 5 lbs 28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800
VSDT 209A2 2 L5 D2A - - 1775 697 790 778 88.0 - VSDL
202A2 1 69.9 27.4 31.1 30.6 - VSMS

VSDL 2 L5 D2A - - 1790 684 797 761 95.5 -

1 70.5 26.9 31.4 30.0 -

VSMS 2 L5S D2A - - 1775 684 810 746 95.0 -

1 69.9 26.9 31.9 29.4 -

29.5R25 VKT 2 E2 E2A 310 212 1861 762 822 844 44.0 - 25.00/3.5 VKT E/M 1 2
Tubeless E1A 376 258 73.3 30.0 32.4 33.2 - VLT 50 kg 8500 9250 9750 10300 10900 11500 11800 12500 12850 13600 14000
VMT 30 lbs 18700 20400 21500 22700 24000 25400 26000 27600 28300 30000 30900
VLT 200B MS E3 DE2 266 182 1885 762 840 830 48.0 - VLTS
208A2 L3 - - 74.2 30.0 33.1 32.7 - VSNT

VMT 2 E3 E2A 266 182 1865 762 808 868 42.0 - VLT Loader 1 2
E1A 354 242 73.4 30.0 31.8 34.2 - VMT 10 kg 15500 16000 17000 17500 18000 19000 19500 20000 20600 21200 22400
New
208A2 1 L3 D2A - - VJT 5 lbs 34200 35300 37500 38600 39700 41900 43000 44100 45400 46700 49400
VJT 208A2 1 L3 D2A - - 1865 762 TBA TBA 42.0 - VSNT
73.4 30.0 TBA TBA - VSDT

29.5R25
VSDL
VLTS 200B 2 E4 E2A 225 154 1865 762 835 844 65.0 -
73.4 30.0 32.9 33.2 -

VSNT MS E4 DE2 220 151 1905 768 849 835 60.0 -

L4 - - 75.0 30.2 33.4 32.9 -
2 D2A
VSDT 216A2 2 L5 D2A - - 1903 779 845 869 96.0 -
208A2 1 74.9 30.7 33.3 34.2 -

VSDL 2 L5 D2A - - 1925 766 855 846 104.0 -

1 75.8 30.2 33.7 33.3 -

29" 29"

775/65R29
775/65R29 VTS 1 L3 D2A - - 1740 775 762 843 43.0 - (24.00/3.5) VTS Loader 1
Tubeless 68.5 30.5 30.0 33.2 - 25.00/3.5 10 kg 15000 15500 16500
17000
5 lbs 33100 34200 36400
37500
875/65R29 VTS MS E3 DE2 - - 1865 850 804 982 47.5 - 27.00/3.5 VTS E/M Ê Ê Ê Ê Ê Ê Ê Ê Ê
2
Tubeless L3 73.4 33.5 31.7 38.7 - (28.00/3.5) VLTS 50 kg 10000 10900 11500 12150 12850 13600 14000 14500
15500

875/65R29
New
30 lbs 22000 24000 25400 26800 28300 30000 30900 32000
34200
VLTS 203B MS E4 DE2 TBA TBA 1880 858 TBA TBA 60.0 - VTS Loader 1
214A2 L4 - - 74.0 33.8 TBA TBA VLTS 10 kg 18500 19500 20600 21200
5 lbs 40800 43000 45400 46700
29.5R29 VKT 2 E2 E2A 330 226 1958 765 870 841 44.0 - 25.00/3.5 VKT E/M 1 2
Tubeless E1A 401 275 77.1 30.1 34.3 33.1 - VSNT 50 kg 9250 9750 10300 10900 11500 12150 12500 13200 13600 14500 15000

29.5R29
30 lbs 20400 21500 22700 24000 25400 26800 27600 29100 30000 32000 33100
VSNT MS E4 DE2 232 159 2000 774 905 849 60.0 - VSNT Loader 1 2
L4 - - 78.7 30.5 35.6 34.6 - 10 kg 16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600
2 D2A 5 lbs 36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000
For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.
34 RADIAL TIRE 35
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
29.5R29 VSDT 218A2 2 L5 D2A - - 1989 779 883 872 96.0 - 25.00/3.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
Tubeless 211A2 1 78.3 30.7 34.8 34.3 - psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
VSDT Loader 1 2
2

29.5R29
VSDL L5 D2A - - 2008 776 900 856 104.5 - VSDL 10 kg 16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600
1 79.1 30.6 35.4 33.7 - VSMS 5 lbs 36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000

VSMS 2 L5S D2A - - 2008 766 904 861 104.5 -

79.1 30.2 35.6 33.9 -

33.25R29
33.25R29 VLT 2 E3 E2A 349 239 2076 864 906 943 54.0 - 27.00/3.5 VLT E/M 2
Tubeless 81.7 34.0 35.7 37.1 - 50 kg 11200 12150 12850 13600 14000 15000 15500 16500 17000 17500 18500
30 lbs 24700 26800 28300 30000 30900 33100 34200 36400 37500 38600 40800
33" 33"
18.00R33 VFT 2 E2 - - - 1811 500 822 567 30.5 587 13.00/2.5 kPa 450 475 500 525 550 575 600 625 650 675 700
Tubeless E1A 281 192 71.3 19.7 32.4 22.3 23.1 psi 65 69 73 76 80 83 87 91 94 98 102
E3A 328 225 VFT E/M 2
VEL 2 E3 E1A 263 180 1805 500 835 560 35.0 587 VEL 50 kg 7750 8000 8500 8750 9000 9250 9750 10000 10300 10600 10900
E3A 307 210 71.1 19.7 32.9 22.0 23.1 VMTS 30 lbs 17100 17600 18700 19300 19800 20400 21500 22000 22700 23400 24000
VMTP
VMTS 2 E4 E2A 199 136 1862 515 849 576 51.0 587 VELS
E1A 246 168 73.3 20.3 33.4 22.7 23.1 VRQP

VMTP 2 E4 E2A 185 127 1870 515 846 575 55.0 587
E1A 229 157 73.6 20.3 33.3 22.6 23.1

18.00R33
VELS 2 E4 E2A 170 116 1856 512 856 575 49.0 587
E1A 211 145 73.1 20.2 33.7 22.6 23.1

3 Industrial - - - VCHS IDU

Service See characteristics page 46 VELS

VRQP 2 E4 E2ALS 122 84 1890 515 876 575 64.5 587 13.00/2.5
74.4 20.3 34.5 22.6 23.1 See characteristics page 47

VCHS 219A5 3 Industrial IDU - -

Service See characteristics page 46

21.00R33 VMTP 2 E4 E2A 237 162 1998 578 909 650 61.0 701 15.00/3.0 VMTP E/M 2
Tubeless E1A 293 201 78.7 22.8 35.8 25.6 27.6 VRLS 50 kg 10000 10300 10900 11200 11500 11800 12500 12850 13200 13600 14000
30 lbs 22000 22700 24000 24700 25400 26000 27600 28300 29100 30000 30900

21.00R33
VRLS 2 E4 E2A 227 155 1978 578 899 650 54.0 701
77.9 22.8 35.4 25.6 27.6

21.00R33

35/65R33 VSNT MS E4 DE2 250 171 2075 904 936 976 62.5 - 28.00/3.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
Tubeless L4 - - 81.7 35.6 36.9 38.4 - psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
2 D2A VSNT E/M 2

35/65R33
VSNL 2 L4 D2A - - 2075 880 936 981 62.5 - 50 kg 10600 11500 12150 12850 13600 14000 15000 15500 16000 17000 17500
81.7 34.6 36.9 38.6 - 30 lbs 23400 25400 26800 28300 30000 30900 33100 34200 35300 37500 38600
New VSNT Loader 1 2
VSDT 224A2 2 L5 D2A - - 2075 890 914 990 96.0 - VSNL 10 kg 19500 20600 21200 22400 23000 23600 25000 25750 26500 27250 28000
217A2 1 81.7 35.0 36.0 39.0 - VSDT 5 lbs 43000 45400 46700 49400 50700 52000 55100 56800 58400 60000 61500

36 RADIAL TIRE 37
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
35" 35"
35/65R33 VSDL 2 L5 D2A - - 2075 880 917 951 95.0 - 28.00/3.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
Tubeless 1 81.7 34.6 36.1 37.4 - psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
VSDL Loader 1 2

35/65R33
10 kg 19500 20600 21200 22400 23000 23600 25000 25750 26500 27250 28000
5 lbs 43000 45400 46700 49400 50700 52000 55100 56800 58400 60000 61500
2 Industrial IDU - - VSDL IDU
Service See characteristics page 46 See characteristics page 47

21.00R35 VEL 2 E3 - - - 1993 568 912 646 37.5 701 15.00/3.0 kPa 450 475 500 525 550 575 600 625 650 675 700
Tubeless - - - 78.5 22.4 35.9 25.4 27.6 psi 65 69 73 76 80 83 87 91 94 98 102
E3A 410 281 VEL E/M 2

21.00R35
VMTP 2 E4 E2A 237 162 2048 577 922 655 61.0 701 VMTP 50 kg 10300 10600 11200 11500 11800 12150 12850 13200 13600 14000 14500
E1A 293 201 80.6 22.7 36.3 25.8 27.6 VELS 30 lbs 22700 23400 24700 25400 26000 26800 28300 29100 30000 30900 32000

VELS 2 E4 E2A 227 155 2044 577 935 650 59.0 701
E1A 281 192 80.5 22.7 36.8 25.6 27.6

24.00R35 VEL 2 E3 - - - 2123 660 950 741 44.0 795 17.00/3.5 VEL E/M 2
Tubeless E1A 448 307 83.6 26.0 37.4 29.2 31.3 VMTS 50 kg 13200 13600 14000 14500 15500 16000 16500 17000 17500 18000 18500
VMTP 30 lbs 29100 30000 30900 32000 34200 35300 36400 37500 38600 39700 40800
VMTS 2 E4 - - - 2175 660 980 734 59.0 795 VRLS
- - - 85.6 26.0 38.6 28.9 31.3 VRQP
E3A 489 335

24.00R35
VMTP 2 E4 E2A 314 215 2194 660 975 734 68.0 795
E1A 388 266 86.4 26.0 38.4 28.9 31.3

VRLS 2 E4 E2A 314 215 2175 660 980 734 59.0 795
E1A 388 266 85.6 26.0 38.6 28.9 31.3
E3A 453 310
VRQP 2 E4 E2ALS 207 142 2194 660 995 745 71.5 795
86.4 26.0 39.2 29.3 31.3

29.5R35 VRL 2 E3 - - - 2120 768 932 844 39.5 - 25.00/3.5 kPa 275 300 325 350 375 400 425 450 475 500 525

29.5R35
Tubeless E1A 380 260 83.5 30.2 36.7 33.2 - psi 40 44 47 51 54 58 62 65 69 73 76
VRL E/M
E3 2
50 kg 10000 10600 11200 11800 12500 13200 13600 14500 15000 15500 16000
30 lbs 22000 23400 24700 26000 27600 29100 30000 32000 33100 34200 35300

33.25R35
33.25R35 VRL 2 E3 - - - 2228 846 990 970 49.0 - 27.00/3.5 VRL E2 2
Tubeless E1A 472 323 87.7 33.3 39.0 38.2 - E3 kg 12150 12850 14000 14500 15500 16000 17000 17500 18500 19000 20000
lbs 26800 28300 30900 32000 34200 35300 37500 38600 40800 41900 44100
37.25R35 VLT 2 E3 E2A 417 286 2388 954 1054 1063 59.5 - 31.00/4.0 VLT E2 2
Tubeless E1A 569 390 94.0 37.6 41.5 41.9 - VRL E3 kg 14500 15500 16500 17500 18500 19500 20600 21200 22400 23000 23600

37.25R35
E3 lbs 32000 34200 36400 38600 40800 43000 45400 46700 49400 50700 52000
VRL 2 E3 - - - 2370 954 1045 1063 51.0 -
E1A 563 386 93.3 37.6 41.1 41.9 -

39" 39"
2

37.5R39
37.5R39 VKT E2 - - - 2524 982 1120 1080 51.0 - 32.00/4.5 VKT E/M 2
Tubeless E1A 696 477 99.4 38.7 44.1 42.5 - 50 kg 16000 17000 18000 19000 20000 21200 21800 23000 23600 25000 25750
30 lbs 35300 37500 39700 41900 44100 46700 48100 50700 52000 55100 56800
40.5/75R39 VLT 2 E3 E2A 500 342 2609 1002 1157 1127 58.5 - 32.00/4.5 VLT E/M 2

40.5/75R39
Tubeless E1A 682 467 102.6 39.4 45.6 44.4 - VRL 50 kg 18000 19000 20600 21800 22400 23600 25000 25750 27250 28000 29000
30 lbs 39700 41900 45400 48100 49400 52000 55100 56800 60000 61500 64000
VRL 2 E3 - - - 2588 1002 1147 1125 48.5 -
E1A 675 462 101.9 39.4 45.2 44.3 -

38 RADIAL TIRE 39
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
45/65R39 VSDL 1 L5 D2A - - 2580 1074 1116 1205 116.0 - 32.00/4.5 kPa 400 425 450 475 500 525 550 575 600 625 650 675 700

45/65R39
Tubeless 101.6 42.3 43.9 47.4 - 36.00/4.5 psi 58 62 65 69 73 76 80 83 87 91 94 98 102
VSDL Loader 1
10 kg 33500 34500 36500 37500 40000
5 lbs 74000 76000 80500 82500 88000
45" 45"
45/65R45 VSNL 2 L4 D2A - - 2730 1123 TBA TBA 75.0 - 36.00/4.5 VSNL Loader 1 2
Tubeless 107.5 44.2 TBA TBA - VSDL 10 kg 35500 37500 38750 40000 42500 43750 45000 46250 47500 50000 51500

45/65R45
5 lbs 78500 82500 85500 88000 93500 96500 99000 102000 104500 110000 113500
VSDL 2 L5 D2A - - 2730 1123 1188 1274 111.5 -
1 107.5 44.2 46.8 50.2 -

49" 49"
24.00R49 VFT 2 E2 - - - 2486 656 1147 738 38.5 795 17.00/3.5 VFT E/M 2
Tubeless E1A 562 385 97.9 25.8 45.2 29.1 31.3 VMTP 50 kg 15500 16500 17000 17500 18500 19000 19500 20000 20600 21200 21800
VRLS 30 lbs 34200 36480 37500 38600 40800 41900 43000 44100 45400 46700 48100

24.00R49
VMTP 2 E4 E2A 361 247 2547 656 1175 735 68.0 795
- - - 100.3 25.8 46.3 28.9 31.3

VRLS 2 E4 E2A 341 234 2531 656 1166 738 59.0 795
E1A 421 288 99.6 25.8 45.9 29.1 31.3
E3A 492 337
27.00R49 VFT 2 E2 E2A 557 382 2646 750 1207 835 44.0 892 19.50/4.0 VFT E/M 2
Tubeless - - - 104.2 29.5 47.5 32.9 35.1 VRL 50 kg 19500 20000 20600 21800 22400 23000 23600 25000 25750 26500 27250
E3A 804 551 VMTS 30 lbs 43000 44100 45400 48100 49400 50700 52000 55100 56800 58400 60000
VRL 2 E3 - - - 2645 750 1205 835 42.5 892 VMTP
E1A 644 441 104.1 29.5 47.4 32.9 35.1 VRLS
E3A 753 516 VREP
VMTS 2 E4 E2A 486 333 2690 750 1230 835 64.0 892 VRDP
E1A 600 411 105.9 29.5 48.4 32.9 35.1
E3A 702 481

27.00R49
VMTP 2 E4 E2A 440 301 2708 750 1239 835 73.0 892
E1A 544 373 106.6 29.5 48.8 32.9 35.1
E3A 636 436
VRLS 2 E4 E2A 415 284 2687 750 1228 835 66.5 892
E1A 513 351 105.8 29.5 48.3 32.9 35.1
New
E3A 600 411
VREP 2 E4 E2A 457 313 2692 750 1231 835 66.5 892
E1A 564 386 106.0 29.5 48.4 32.9 35.1
E3A 660 452
VRDP 2 E4 E2A 415 284 2711 750 1240 835 76.0 892
E1A 513 351 106.7 29.5 48.8 32.9 35.1
E3A 600 411

31/90R49
31/90R49 VELSF 2 E4 E2A 427 292 2694 771 1228 862 66.5 956 19.50/4.0 VELSF E/M 2
Tubeless E1A 528 362 106.1 30.4 48.3 33.9 37.6 50 kg 20600 21200 22400 23000 23600 25000 25750 26500 27250 27800 29000
30 lbs 45400 46700 49400 50700 52000 55100 56800 58400 60000 61500 64000
51" 51"
30.00R51 VMT 2 E3 - - - 2850 854 1294 950 45.0 993 22.00/4.5 VMT E/M 2
Tubeless - - - 112.2 33.6 50.9 37.4 39.1 VRLS 50 kg 23600 25000 25750 26500 28000 29000 30000 30750 31500 32500 33500

30.00R51
E3A 1065 729 30 lbs 52000 55100 56800 58400 61500 64000 66000 68000 69500 71500 74000
VRLS 2 E4 E2A 496 340 2911 854 1311 963 74.5 993
E1A 603 413 114.6 33.6 51.6 37.9 39.1
E3A 717 491
For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.

40 RADIAL TIRE 41
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
33.00R51 VMT 2 E3 - - - 2988 932 1338 1052 48.0 1074 24.00/5.0 kPa 400 425 450 475 500 525 550 575 600 625 650 675 700
Tubeless E1A 1018 697 117.6 36.7 52.7 41.4 42.3 psi 58 62 65 69 73 76 80 83 87 91 94 98 102
E3A 1209 828 VMT E/M 2
VMTP 2 E4 E2A 591 405 3063 932 1376 1052 89.5 1074 VMTP 50 kg 27250 29000 30000 30750 32500 33500 34500 35500 36500 37500 38750
E1A 700 479 120.6 36.7 54.2 41.4 42.3 VRLS 30 lbs 60000 64000 66000 68000 71500 74000 76000 78500 80500 82500 85500
VRDP

33.00R51
VRLS 2 E4 E2A 558 382 3036 932 1371 1051 78.5 1074 VRPS
E1A 679 465 119.5 36.7 54.0 41.4 42.3
E3A 807 553
VRDP 2 E4 E2A 558 382 3061 932 1376 1051 87.0 1074
E1A 679 465 120.5 36.7 54.2 41.4 42.3
New
E3A 807 553
VRPS 2 E4 E2A 558 382 3061 932 TBA TBA 87.0 1074
120.5 36.7 TBA TBA 42.3

36.00R51 VHS 2 E2 - - - 3108 1015 1390 1163 44.0 1184 26.00/5.0 VHS E2 2
Tubeless - - - 122.4 40.0 54.7 45.4 46.6 VRLS kg 33500 35500 36500 37500 38750 40000 41250 42500 43750 45000 46250

36.00R51
E3A 1485 1017 lbs 74000 78500 80500 82500 85500 88000 91000 93500 96500 99000 102000
VRLS 2 E4 E2A 642 440 3204 1015 1431 1153 86.5 1184
E1A 781 535 126.1 40.0 56.3 45.4 46.6
E3A 927 635

50/65R51
50/65R51 VSDL 2 L5 D2A - - 3070 1278 1347 1361 128.0 - 40.00/4.5 VSDL Loader 2
Tubeless 120.9 50.3 53.0 53.6 - 10 kg 45000 47500 50000 51500 54500 56000 58000 60000 61500 63000 65000
5 lbs 99000 104500 110000 113500 120000 123000 127500 131500 135500 139000 143500
57" 57"
37.00R57 VZTS 2 E4 E2A 694 475 3422 1044 1541 1190 87.5 1217 27.00/6.0 VZTS E4
E/M 2
Tubeless E1A 845 579 134.7 41.1 60.7 46.9 47.9 VELSL E4
50 kg 37500 38750 40000 41250 43750 45000 46250 47500 48750 50000 51500
E3A 1003 687 VRLS E4
30 lbs 82500 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500

37.00R57
VELSL 2 E4 - - - 3388 1044 1524 1190 77.0 1217
- - - 133.4 41.1 60.0 46.9 47.9
E3A 1148 786
VRLS 2 E4 E2A 694 475 3410 1044 1535 1190 87.5 1217
E1A 845 579 134.3 41.1 60.4 46.9 47.9
E3A 1003 687

42/90R57
42/90R57 VRDP 2 E4 E2A 715 490 3456 1060 1539 1210 97.0 1323 27.00/6.0 VRDP E4 2
Tubeless E1A 870 596 136.1 41.7 60.6 47.7 52.1 kg 38750 40000 41250 42500 45000 46250 47500 48750 50000 51500 53000
E3A 1033 708 lbs 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500 117000
40.00R57 VMT 2 E3 E2A 1204 825 3512 1108 1560 1264 64.0 1311 29.00/6.0 VMT E3 2
Tubeless E1A 1463 1002 138.3 43.6 61.4 49.8 51.6 VZTS E4 kg 42500 45000 46250 48750 50000 51500 53000 54500 56000 58000 60000
E3A 1739 1191 VELSL E4 lbs 93500 99000 102000 107500 110000 113500 117000 120000 123500 128000 132500
VZTS 2 E4 E2A 773 529 3585 1140 1606 1289 91.5 1311 VELS E4
E1A 940 644 141.1 44.9 63.2 50.7 51.6 VRDP E4
E3A 1117 765 VRPS
VELSL 2 E4 - - - 3542 1108 1575 1264 80.0 1311
- - - 139.4 43.6 62.0 49.8 51.6

40.00R57
E3A 1330 911
VELS 2 E4 E2A 773 529 3562 1127 1582 1291 91.5 1311
E1A 940 644 140.2 44.4 62.3 50.8 51.6
E3A 1117 765
VRDP 2 E4 E2A 773 529 3575 1108 1591 1264 97.0 1311
E1A 940 644 140.7 43.6 62.6 49.8 51.6
E3A 1117 765
VRPS 2 E4 E2A 773 529 3575 1108 1591 1264 97.0 1311
E1A 940 644 140.7 43.6 62.6 49.8 51.6
E3A 1117 765
For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.

42 RADIAL TIRE 43
Approximate Inflated Dimensions Minimum Recommended Application
TRA Code OTD
Star OD OW SLR SLW Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern LI/SS or Spec TKPH TMPH Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
46/90R57 VZTP 2 E4 E2A 766 525 3585 1145 1591 1299 97.0 1412 29.00/6.0 kPa 400 425 450 475 500 525 550 575 600 625 650 675 700
Tubeless E1A 927 635 141.1 45.1 62.6 51.1 55.6 (32.00/6.0) psi 58 62 65 69 73 76 80 83 87 91 94 98 102
E3A 1103 755 VZTP E/M 2
VELS 2 E4 E2A 796 545 3557 1145 1577 1299 88.0 1412 VELS 50 kg 45000 47500 48750 51500 53000 54500 56000 58000 60000 61500 63000
E1A 968 663 140.0 45.1 62.1 51.1 55.6 VRDP 30 lbs 99000 104500 107500 113500 117000 120000 123500 128000 132500 135500 139000

46/90R57
E3A 1150 788 VRPS
VRDP 2 E4 E2A 796 545 3575 1145 1586 1299 97.0 1412
E1A 968 663 140.7 45.1 62.4 51.1 55.6
E3A 1150 788
VRPS 2 E4 E2A 796 545 3575 1145 1586 1299 97.0 1412
E1A 968 663 140.7 45.1 62.4 51.1 55.6
E3A 1150 788
55.5/80R57 VSDL L5 D2A - - 3740 1410 1634 1616 125.5 - 44.00/6.0 VSDL Loader

55.5/80R57
Tubeless 147.2 55.5 64.3 63.6 - 10 kg 82500 85000 90000 92500 95000 97500 100000 103000 106000 * About some exceptions, consult a
5 lbs 182000 187500 198000 203500 209000 214500 220500 227000 233500 bridgestone representative.
50/90R57 VELS 2 E4 - - - 3825 1283 1694 1471 91.5 1562 32.00/6.5 VELS E/M 2
Tubeless - - - 150.6 50.5 66.7 57.9 61.5 34.00/6.5 VRPS 50 kg 56000 58000 60000 63000 65000 67000 69000 71000 73000 75000 77500

50/90R57
E3A 1278 875 30 lbs 123500 128000 132500 139000 143500 147500 152000 156500 161000 165500 171000
VRPS 2 E4 E2A 884 605 3840 1283 1702 1471 107.0 1562
E1A 1092 748 151.2 50.5 67.0 57.9 61.5
E3A 1278 875

60/80R57
60/80R57 VSDL L5 D2A - - 3952 1491 1738 1755 118 - 47.00/6.0 VSDL Loader
Tubeless 155.6 58.7 68.4 69.1 - 10 kg 82000 85750 89500 93250 97000 100500 104000 107750 111000 114750 118000
5 lbs 180500 189250 197500 205500 213500 221500 229500 237250 245000 252500 260000
63" 63"
53/80R63 VRF 2 E3 - - - 3741 1311 TBA TBA 64.0 1626 36.00/5.0 VRF E/M 2
Tubeless - - - 147.3 51.6 TBA TBA 64.0 VRDP 50 kg 67000 69000 71000 75000 77500 80000 82500
E3A 1628 1115 VRPS 30 lbs 147500 152000 156500 165500 171000 176500 182000

53/80R63
VRDP 2 E4 E2A 974 667 3828 1304 1657 1511 110.0 1626
E1A 1150 788 150.7 51.3 65.2 59.5 64.0
E3A 1408 964
VRPS 2 E4 E2A 974 667 3828 1304 1657 1511 110.0 1626
E1A 1150 788 150.7 51.3 65.2 59.5 64.0
E3A 1408 964
59/80R63 VRF 2 E3 - - - 4022 1459 1710 1712 71.0 1780 44.00/5.0 VRF 2
Tubeless E1A 1784 1222 158.3 57.4 67.3 67.4 70.0 VRPS kg 80000 82500 87500 90000 92500 95000 100000 * 44.00/5.0 Rim
E3A 2050 1404 lbs 176500 182000 193000 198500 204000 209500 220500
- - - 41.00/5.0 2
E1A 1686 1155 kg 77000 79000 84000 86000 89000 91000 96000 * 41.00/5.0 Rim

59/80R63
E3A 1937 1327 lbs 169300 174600 185200 190500 195800 201050 211650
VRPS 2 E4 E2A 1228 841 4017 1467 1710 1712 116.0 1780 44.00/5.0
E1A 1515 1038 158.1 57.8 67.3 67.4 70.0
E3A 1773 1214
E2A 1160 794 41.00/5.0
E1A 1431 980
E3A 1675 1147
For the TKPH(TMPH) Ratings of Radial Tires For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the star rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.

44 RADIAL TIRE 45
TRA Code Approximate Inflated Dimensions Minimum Recommended
Star OTD Star Inflation
Tire Size Pattern LI/SS or OD OW SLR SLW Dual Spacing Rim/Flange Height Pattern Application Tire Load Limits at Various Speeds Size
Rating mm mm mm mm mm mm Rating Pressure
Application inch inch inch inch inch inch
Industrial Service Industrial Service
20" 20"
12.00R20 VCH 3 Industrial 1140 315 512 360 29.5 380 8.50V kPa km/h 0 Creep 5 10 15 20 25 30 35
Service 44.9 12.4 20.2 14.2 15.0 psi mph Static Creep 3 5 9 12 15 19 22

12.00R20
VCH IDU 3 Load 1000 kg 9230 9230 9230 9230 9230 9230 9230 8875 8875
VCHS 176A5 3 Industrial 1139 297 507 355 41.5 375 VCHS Wheel 145 lbs 20350 20350 20350 20350 20350 20350 20350 19570 19570
Service 44.8 11.7 20.0 14.0 14.8 Steering 1000 kg 7100 7100 7100 7100 7100 7100 7100 6570 6570
Wheel 145 lbs 15620 15620 15620 15620 15620 15620 15620 14480 14480
24" 24"
12.00R24 VCH 2 Industrial 1254 323 558 376 29.5 - 8.50V VCH IDU 2 Load 960 kg 12420 11040 10005 9315 8970 8765 8625
Service 49.4 12.7 22.0 14.8 - Wheel 139 lbs 27385 24345 22060 20540 19780 19320 19020
Steering 960 kg 9935 8830 8005 7450 7175 7010 6900

12.00R24
New Wheel 139 lbs 21910 19475 17650 16430 15825 15455 15215
VCHS Industrial 1263 310 580 351 42.0 - VCHS IDU Load 1000 kg 9750 9750 9750 9750 9750 9750 9750 9375 9375 *Compliant with the ETRTO
Service 49.7 12.2 22.8 13.8 - Wheel 145 lbs 21500 21500 21500 21500 21500 21500 21500 20670 20670 standard of industrial tires
Steering 1000 kg 7500 7500 7500 7500 7500 7500 7500 6935 6415
Wheel 145 lbs 16500 16500 16500 16500 16500 16500 16500 15200 15200
14.00R24 VHB 3 Industrial 1357 383 630 410 23.5 450 10.00W VHB IDU 3 Load 1000 kg 18000 16000 14500 13500 13000 12700 12500 12400
Service 53.4 15.1 24.8 16.1 17.7 VCH Wheel 145 lbs 39690 35280 31970 29765 28665 28005 27560 27340

14.00R24
VCH 3 Industrial 1393 390 610 460 32.0 480 VCHS Steering 1000 kg 14400 12800 11600 10800 10400 10160 10000 9920
Service 54.8 15.4 24.0 18.1 18.9 Wheel 145 lbs 31750 28225 25580 23815 22930 22400 22050 21875
VCHS 196A5 3 Industrial 1412 383 626 445 63.0 480
Service 55.6 15.1 24.6 17.5 18.9
3

14.00R24 TG
14.00R24 TG VCHS 196A5 Industrial 10.00VA VCHS IDU 3 Load 1000 kg 18000 16000 14500 13500 13000 12700 12500 12400
Tubeless Service Wheel 145 lbs 39690 35280 31970 29765 28665 28005 27560 27340
Steering 1000 kg 14400 12800 11600 10800 10400 10160 10000 9920
Wheel 145 lbs 31750 28225 25580 23815 22930 22400 22050 21875
25" 25"
16.00R25 VHB 2 Industrial 1484 440 690 475 22.5 513 11.25/2.0 VHB IDU 2 Load 960 kg 21870 19440 17615 16400 15795 15430 15185 15065
Tubeless Service 58.4 17.3 27.2 18.7 20.2 VCHD Wheel 139 lbs 48225 42865 38845 36165 34825 34025 33490 33220

16.00R25
VCHD 2 Industrial 1500 435 655 503 54.0 523 VRLS Steering 960 kg 17495 15550 14095 13120 12635 12345 12150 12050
Service 59.1 17.1 25.8 19.8 20.6 Wheel 139 lbs 38580 34290 31075 28935 27860 27220 26790 26575
VRLS 2 Industrial 1531 448 713 488 45.0 540
Service 60.3 17.6 28.1 17.6 21.3
18.00R25 VHB 3 Industrial 1610 515 733 565 26.0 587 13.00/2.5 VHB IDU 3 Load 1000 kg 30600 27200 24650 22950 22100 21590 21250 21080
Tubeless Service 63.4 20.3 28.9 22.2 23.1 VEL Wheel 145 lbs 67475 59975 54355 50605 48730 47605 46855 46480
VEL 3 Industrial 1609 507 727 571 34.0 612 VCHS Steering 1000 kg 24480 21760 19720 18360 17680 17270 17000 16865
Service 63.3 20.0 28.6 22.5 24.1 Wheel 145 lbs 53980 47980 43480 40485 38985 38085 37485 37185

18.00R25
VCHS 214A5 3 Industrial 1650 504 707 596 64.0 600
Service 65.0 19.8 27.8 23.5 23.6
VSMS 2 Industrial 1681 512 730 592 84.5 612 VSMS IDU 2 Load 960 kg 28800 25600 23200 21600 20800 20320 20000 19840
Service 66.2 20.2 28.7 23.3 24.1 Wheel 139 lbs 63505 56450 51155 47630 45865 44805 44100 43745
Steering 960 kg 23040 20480 18560 17280 16640 16255 16000 15870
Wheel 139 lbs 50805 45160 40925 38100 36690 35845 35280 34995
23.5R25 VSDL 2 Industrial 1672 608 755 687 87.0 722 19.50/2.5 VSDL IDU 2 Load 690 kg 26100 23200 21025 19575 18850 18415 18125 17980

23.5R25
Tubeless Service 65.8 23.9 29.7 27.0 28.4 Wheel 100 lbs 57550 51155 46360 43160 41565 40605 39965 39645
Steering 690 kg 20880 18560 16820 15660 15080 14730 14500 14385
Wheel 100 lbs 46040 40925 37090 34530 33250 32485 31970 31715
33" 33"
18.00R33 VCHS 219A5 3 Industrial 1856 508 803 585 68.5 600 13.00/2.5 VCHS IDU 3 Load 1000 kg 35100 31200 28275 26325 25350 24765 24375 24180

18.00R33
Tubeless Service 73.1 20.0 31.6 23.0 23.6 VELS Wheel 145 lbs 77395 68795 62345 58045 55895 54605 53745 53315
VELS 3 Industrial 1860 512 800 604 49.0 634 Steering 1000 kg 28080 24960 22620 21060 20280 19810 19500 19345
Service 73.2 20.2 31.5 23.8 25.0 Wheel 145 lbs 61915 55035 49875 46435 44715 43685 42995 42655
35/65R33 VSDL 2 Industrial 2075 880 900 986 95.0 - 28.00/3.5 VSDL IDU 2 Load 780 kg 50400 44800 40600 37800 36400 35560 35000

35/65R33
Tubeless Service 81.7 34.6 35.4 38.8 - Wheel 113 lbs 111130 98785 89525 83350 80260 78410 77175
Steering 780 kg 40320 35840 32480 30240 29120 28450 28000
Wheel 113 lbs 88905 79025 71620 66680 64210 62725 61740
Off-the-Road Tires Used for Industrial Vehicle Applications
1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log stackers etc., 3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
used on hard improved surfaces, smooth floors and runways. 4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative.
2) Use Specifications of Industrial Service only. 5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.

46 RADIAL TIRE 47
TRA Code Approximate Inflated Dimensions Minimum Recommended
OTD Inflation
Tire Size Pattern LI/SS or OD OW SLR SLW Dual Spacing Rim/Flange Height Pattern Application Tire Load Limits at Various Speeds Size
Application mm mm mm mm mm mm Pressure
inch inch inch inch inch inch
Mobile Crane Service (High-Speed) Mobile Crane Service (High-Speed) *Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
21" 21"
24R21 VGT Mobile Crane Service 1380 601 623 647 24.5 - 18.00/1.5 kPa km/h 88

24R21
Tubeless 54.3 23.7 24.5 25.5 - psi mph 55
VGT High-Speed 580 kg 7120
85 lbs 15700
24" 24"
385/95R24 VSB 170E Mobile Crane Service 1365 390 628 433 21.0 450 10.00W kPa km/h 0 Creep 5 10 15 20 30 40 50 60 70 80 90 100

385/95R24 (14.00R24)
(14.00R24) 53.7 15.4 24.7 17.0 17.7 psi mph Static Creep 3 5 9 12 19 25 31 37 43 50 56 62
VSB High-Speed 900 kg 17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
VHB 170E Mobile Crane Service 1357 383 630 410 23.5 450 VHB 131 lbs 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
53.4 15.1 24.8 16.1 17.7 VHS

VHS 170E Mobile Crane Service 1356 384 626 422 23.0 450
53.4 15.1 24.6 16.6 17.7

25" 25"
385/95R25 VSB 170E Mobile Crane Service 1365 390 628 433 21.0 450 10.00/1.5 VSB High-Speed 900 kg 17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600

385/95R25 (14.00R25)
(14.00R25) 53.7 15.4 24.7 17.0 17.7 VHS 131 lbs 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
Tubeless VSW
VHS 170E Mobile Crane Service 1356 384 626 422 23.0 450 (170E)
170F 53.4 15.1 24.6 16.6 17.7
VHS High-Speed 900 kg 15000 12600 10800 9900 9000 7500 6900 6720 6600 6300 6000 5640 5100
VSW 170E Mobile Crane Service 1355 394 631 427 23.5 450 (170F) 131 lbs 33070 27780 23810 21830 19850 16540 15220 14820 14560 13890 13230 12440 11250
53.3 15.5 24.8 16.8 17.7

445/95R25 VHB 177E Mobile Crane Service 1484 440 690 475 22.5 513 11.25/2.0 VHB High-Speed 900 kg 21500 17500 15500 13400 12000 10800 9500 9050 8600 8100 7300 6000 5100 4375

445/95R25 (16.00R25)
(16.00R25) 58.4 17.3 27.2 18.7 20.2 VHS 131 lbs 47500 38500 34200 29600 26400 23800 20900 20000 19000 18000 16100 13200 11300 9650
Tubeless VSW
VHS 177E Mobile Crane Service 1484 435 684 480 25.5 513 (177E)
174F 58.4 17.1 26.9 18.9 20.2
VHS High-Speed 900 kg 16750 14070 12060 11055 10050 8375 7705 7505 7370 7035 6700 6300 5695
VSW 177E Mobile Crane Service 1484 435 695 476 23.0 513 (174F) 131 lbs 36930 31020 26590 24380 22160 18470 16990 16550 16250 15510 14780 13890 12560
58.4 17.1 27.4 18.7 20.2

445/80R25 VGT 170E Mobile Crane Service 1339 440 610 485 24.0 - 14.00/1.5 VGT High-Speed 700 kg 17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600

445/80R25
505/95R25 (18.00R25) (17.5R25)
(17.5R25) 52.7 17.3 24.0 19.1 - 102 lbs 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
Tubeless
505/95R25 VHB 186E Mobile Crane Service 1590 510 778 565 26.0 587 13.00/2.5 VHB High-Speed 900 kg 28000 22700 20200 17500 15600 14100 12300 11800 11200 10600 9500 7800 6650 5700
(18.00R25) 62.6 20.1 30.6 22.2 23.1 VHS 131 lbs 61800 50200 44500 38500 34300 31000 27200 26000 24700 23400 20900 17200 14700 12600
Tubeless
VHS 186E Mobile Crane Service 1593 505 727 565 26.0 587
62.7 19.9 28.6 22.2 23.1

525/80R25 VHS 179E Mobile Crane Service 1480 533 677 578 31.0 - 17.00/2.0 VHS High-Speed 700 kg 22900 18600 16500 14300 12700 11500 10100 9600 9150 8700 7750 6350 5400 4650

525/80R25
(20.5R25)
(20.5R25) 58.3 21.0 26.7 22.8 - 102 lbs 50400 40900 36300 31400 28000 25300 22200 21200 20200 19100 17100 14000 12000 10200
Tubeless

48 RADIAL TIRE 49
TRA Code Approximate Inflated Dimensions Minimum Recommended
Star OTD Ply Max.
Tire Size Pattern LI/SS or OD OW SLR SLW Dual Spacing Rim/Flange Height Pattern Application Tire Cold Inflation Pressures at Various Load Limits Size
Rating mm mm mm mm mm mm Rating Speed
Application inch inch inch inch inch inch
Sand Service Sand Service *It is Recommended that 90% of the below indicated loads per tire is to be applied when used on a dual axle.
20" 20"
16.00R20 VSJ 28 E7 1315 414 590 475 18.5 520 10.00W kg 4250 4500 4750 5000 5250 5500 6000 7000 8000 8500 9000 9500
51.8 16.3 23.2 18.7 20.5 lbs 9370 9920 10470 11020 11570 12130 13230 15430 17640 18740 19840 20940
VSJ Sand 28PR 65km/h kPa 490 540 580 630 680 720

16.00R20
40mph psi 71 78 84 91 98 105
50km/h kPa 390 420 450 490
30mph psi 57 61 65 71
16km/h kPa 280 300 320 350
10mph psi 41 44 47 51
25" 25"
21.00R25 VSJ E7 1728 584 784 649 22.5 685 15.00/3.0 VSJ Sand - 65km/h kPa 330 410 490 540 590 630
Tubeless 68.0 23.0 30.9 25.6 27.0 40mph psi 48 60 71 78 85 92

21.00R25
50km/h kPa 260 320 390 420
30mph psi 38 47 57 61
16km/h kPa 200 230 280 300
10mph psi 28 34 41 44

50 RADIAL TIRE 51
4. Remarks 4.3 Load-and-Carry Operations for Front End Loader Service
Service conditions of a loader is defined as “picking up material and relocating a short distance away, a maximum of
4.1 Excess Load 76m (250 feet), one way, with a maximum speed of 10km/h (5mph)”. However, a loader can pick up a load and
transport such load to another location and return unloaded for a longer distance. This type of service is called Load-
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the appropriate above-listed
and-Carry operations. Transportation usually occurs at low speeds, up to 25km/h (15mph), and distances are
load tables are often encountered.
limited.
These excess loads result from items such as actual vehicle weight exceeding the design weight, varying density of
The tires when used in Load-and-Carry operations may encounter heat problems especially on the front axle tires.
materials, field modifications to the equipment, load transfer, etc.
To avoid such problems, Bridgestone recommends the following operating conditions.
Only under these conditions, the actual tire load in service may exceed the above load ratings for the tire(*) by an
For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while considering Ton-
amount not greater than shown in the following table:
Kilometer-Per-Hour (Ton-Mile-Per-Hour) limits. Please consult Bridgestone representative for more information.
E2, E3, E4* L** If you need to use the tire beyond this recommendation, please consult Bridgestone representative.
Maximum Excess Load 7% 7%
Maximum Excess Pressure 14% 14%
800kPa 825kPa
Maximum Pressure
116psi 120psi
(except for underground vehicles) For Radial Tires
When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads. Inflation Pressure
For each 1% increase in load, the inflation pressure must be increased by 2%. Rim Diameter
Maximum Cycle Allowable Average
*except following sizes on the list Tread 29" and below 33" and above Load Capacity*
Distance Work-shift Speed
11.00R20 335/80R20 405/70R20 12.00R24
Class Conventional size Wide base size Wide base size 10km/h (5mph) (m) (km/h)
12.00R20 365/80R20 12R22.5 (95 series) (85, 65 series) (65 series)

*About 63" tires, consult a Bridgestone represetative.
L2, L3 16
**except 55.5/80R57 and 60/80R57 1800
L4 14
550kpa 825kpa 500kpa 650kpa 600kpa 750kpa 100% of
1500 (VSDT) 10
The maximum excess loads will result in reduced tire performance. L5 (80psi) (120psi) (73psi) (94psi) (87psi) (109psi) STD.load
1200 (VSDL) 6
L5S 1200 5
* STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service” .
4.2 The Variation in Load Carrying Capacity with Operating Speed
Operating Speed
E2, E3 E4 G L**
(km/h)
Static +60%
Creep +30%
*
5 +14%
10 0
15 +12% - -13%
20 +10% -
25 +8% -20%
30 +6%
35 +4% -26%
40 +3% 0 -30%
45 +2% -
50 0 -9%
55 -2% -
60 -6% -18%
65 -12% -27%
70 -20%* *
75 -30%* * Reference speed for calculating load variance
* Consult a Bridgestone Representative
80 -42%* *
** About the size of 55.5/80R57 and 60/80R57,
80< * * consult a Bridgestone representative.

This table doesn't secure to prevent the risk derived from heat buildup.

52 RADIAL TIRE 53
BIAS TIRE
1. Tread Designs
® Earthmover Service
E3 E4 L4 L5 L5S

W-LUG R-LUG V-LUG2 R-LUG S E-LUG S2 R-LUG S N-LUG D-LUG SMOOTH TREAD-MS
(WL) (RL) (VL2) (RLS) (ELS2) (RLS) (NL) (DL) (STMS)

® Sand Service ® Grader Service ® Compactor Service ® Logging Service

E7 G1 G2 C1 C2 LS2

SAND CLIPPER-2 RIB GRADER G-LUG FAST GRIP ROAD ROLLER ALLIGATOR2 TIMBER GRIP S
(SCP2) (RG) (GL) (FG) (RR) (AL2) (TGS)

® Loader & Dozer Service ® Industrial Service

G3 L2 L3

R-LUG G-LUG FAST GRIP R-LUG V-LUG2 R-LUG R-LUG S E-LUG S2 SMOOTH TREAD-MS YARD SERVICE-2
(RL) (GL) (FG) (RL) (VL2) (RL) (RLS) (ELS2) (STMS) (YS2)

54 BIAS TIRE 55
2. Application
® Earthmover Service ®Grader Service
HEAT RESISTANT CUT RESISTANT HEAT RESISTANT CUT RESISTANT

TRACTION
TRACTION
GL FG

RG RL

ROCK

ROCK
VL2 RLS
RL
ELS2

Size Type Ply Rating Size Type Ply Rating Size Type Ply Rating

WL(E3) RLS(E4) RG(G1)

9.00-20 T/T 14 18.00-33 T/L 32 9.00-20 T/T 10
RL(E3) ELS2(E4) GL(G2)
10.00-20 T/T 14 18.00-33 T/L 32 9.00-20 T/T 14
11.00-20 T/T 14
FG(G2)
12.00-20 T/T 18
13.00-24 TG T/L 12
12.00-24 T/T 20
T/T 10
14.00-24 T/T 24 28
14.00-24 TG T/L 14
16.00-25 T/L 28
T/T 12 16
18.00-25 T/L 32
16.00-24 TG T/T 16
37.25-35 T/L 36
17.5-25 T/L 12 16
VL2(E3) 20.5-25 T/L 12
20.5-25 T/L 16 20 24 T/T 12
23.5-25 T/L 16 20 24
RL(G3)
26.5-25 T/L 20 24 26
16.00-24 TG T/T 16
29.5-25 T/L 22 28

T/T: Tube Type T/T: Tube Type

T/L: Tubeless Type T/L: Tubeless Type
TG: For Semi-Drop Center Rim

56 BIAS TIRE 57
®Loader & Dozer Service
HEAT RESISTANT CUT RESISTANT HEAT RESISTANT CUT RESISTANT

TRACTION

TRACTION
GL FG FGF

ROCK

ROCK
DL
STMS
RL VL2 RLS

Size Type Ply Rating Size Type Ply Rating Size Type Ply Rating Size Type Ply Rating Size Type Ply Rating

GL(L2) FGF(L2) VL2(L3) NL(L4) STMS(L5S)

9.00-20 T/T 14 10.00-20 T/T 16 15.5-25 T/L 12 35/65-33 T/L 24 30 12.00-24 T/T 16 20
17.5-25 T/L 16 14.00-24 T/T 20
FG(L2) RL(L3) DL(L5)
T/T 16 17.5-25 T/L 20
23x8.50-12 T/T 4 12.00-24 T/T 16 20 17.5-25 T/L 16
20.5-25 T/L 16 20 24 18.00-25 T/L 24 28 32
27x8.50-15 T/T 4 14.00-24 T/T 24 20.5-25 T/L 12 16
T/T 16 20 26.5-25 T/L 32 36
33x12.5-15 T/T 8 14.00-24 TG T/L 12 23.5-25 T/L 20
23.5-25 T/L 16 20 24 29.5-29 T/L 34
12.5/70-16 T/L 68 16.00-24 TG T/T 16 26.5-25 T/L 20 26
T/T 16 20 24
10-16.5 T/L 68 29.5-25 T/L 28
26.5-25 T/L 16 20 24 26
12-16.5 T/L 8 10 35/65-33 T/L 42
T/T 20 24
T/T 8 40/65-39 T/L 56
29.5-25 T/L 22 28
15.5/60-18 T/L 8 41.25/70-39 T/L 42
15.5/70-18 T/L 8 RLS(L4) 45/65-45 T/L 58
10.00-20 T/T 10 12 14 14.00-24 T/T 20 50/65-51 T/L 62
11.00-20 T/T 10 16 23.5-25 T/L 16 65/65-57 T/L 62
15.5/70-20 T/L 10 26.5-25 T/L 26
42x17-20 T/T 10 29.5-25 T/L 28
17.5/65-20 T/L 10
13.00-24 TG T/L 12
T/T 12
14.00-24 TG T/L 12 14
T/T 12
16.9-24 T/T 10
18.4-24 T/T 10
15.5-25 T/L 12
17.5-25 T/L 12 16
20.5-25 T/L 12 T/T: Tube Type
T/T 12 T/L: Tubeless Type T/T: Tube Type
TG: For Semi-Drop Center Rim T/L: Tubeless Type

58 BIAS TIRE 59
®Compactor Service ®Industrial Service
Size Type Ply Rating Size Type Ply Rating

RR(C1) RL
7.50-15 T/T 12 12.00-20 T/T 20
9.5/65-15 T/T 6 14.00-24 T/T 24 28
7.50-16 T/L 6 14.00-24 TG T/L 24
T/T 6 16.00-25 T/L 28 32
RR 10.5/80-16 T/L 6 RL T/T 28
9.00-20 T/T 10 18.00-25 T/L 36 40
14/70-20 T/T 12 21.00-25 T/L 40
21.00-35 T/L 40

AL2(C2)
RLS
23.1-26 T/L 8
T/T 8 14.00-24 TG T/L 24
16.00-25 T/L 28 32

AL2
RLS

ELS2
18.00-25 T/L 40
18.00-33 T/L 36
21.00-35 T/L 40
®Logging Service
ELS2
TGS(LS2)
30.5L-32 T/T 16
STMS
12.00-24 T/T 20
TGS 18.00-25 T/L 40

STMS

YS2
16.00-25 T/L 32

®Sand Service YS2

SCP2(E7)
14.00-20 T/T 18

SCP2

T/T: Tube Type T/T: Tube Type

T/L: Tubeless Type T/L: Tubeless Type
TG: For Semi-Drop Center Rim

60 BIAS TIRE 61
3. Technical Data
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
12" 12"
23x8.50-12 FG 4 L2 - - - 576 215 265 223 14.5 - 5JA kPa 180 200 220 240 260

23x8.50-12
22.7 8.5 10.4 8.8 - psi 26 29 32 35 38
FG Loader PR 4
10 kg 550 585 620 655 685
5 lbs 1210 1290 1365 1445 1510
15" 15"
7.50-15 RR 12 C1 - - - 775 209 360 225 - 250 6.00GS kPa 350 375 400 425 450 475 500 525 550 575 600 625 650 675 700 725 750
30.5 8.2 14.2 8.9 9.8 psi 51 54 58 62 65 69 73 76 80 84 87 91 94 98 102 105 109

7.50-15
RR Compactor PR 12
10 kg 1700 1750 1850 1900 1950 2060 2120 2180 2240 2300 2300 2360 2430 2500 2575 2575 2650
5 lbs 3740 3860 4080 4180 4300 4540 4680 4800 4940 5080 5080 5200 5360 5520 5680 5680 5840
27x8.50-15 FG 4 L2 - - - 686 208 317 218 16.5 - 7JA kPa 180 200 220 240 260 280 300 325

27x8.50-15
27.0 8.2 12.5 8.6 - psi 26 29 32 35 38 41 44 47
FG Loader PR 4
10 kg 695 740 780 820 860
5 lbs 1530 1630 1720 1805 1895

9.5/65-15
9.5/65-15 RR 6 C1 - - - 671 238 312 242 - - 7JA RR Compactor PR 6
26.4 9.4 12.3 9.5 - 10 kg 1100 1155 1205 1255 1315
5 lbs 2430 2550 2560 2770 2900
33x12.5-15 FG 8 L2 - - - 851 318 TBA* TBA* 22.5 - 10.00F kPa 120 140 160 180 200 220 240 260 280 300 325 350 375 400 425 450

33x12.5-15
33.5 12.5 TBA* TBA* - psi 17 20 23 26 29 32 35 38 41 44 47 51 54 58 62 65
FG Loader PR 8
10 kg 1510 1605 1695 1785 1870 1950 2035 2130
5 lbs 3330 3540 3735 3935 4125 4300 4485 4695
16" 16"
7.50-16 RR 6 C1 - - - 814 225 379 243 - 250 6.00GS RR C1
Compactor PR 6
Tubeless 32.0 8.9 14.9 9.6 9.8 6LB 10 kg 1405 1470 1535 1600 1675 1750 1820 1890

7.50-16
5 lbs 3100 3240 3380 3530 3690 3860 4010 4170
7.50-16 776 214 361 224
30.6 8.4 14.2 8.8

12.5/70-16 10.5/80-16
10.5/80-16 RR 6 C1 - - - 812 272 376 282 - - 8LB RR PR 6
Tubeless 32.0 10.7 14.8 11.1 - kg 1645 1725 1800 1875
lbs 3630 3800 3970 4130
12.5/70-16 FG 6 L2 - - - 860 319 389 336 21.0 - 10LB FG Loader PR 6 8
Tubeless 8 33.9 12.6 15.3 13.2 - 10 kg 1050 1145 1240 1330 1410 1495 1570 1645
5 lbs 2315 2525 2735 2930 3110 3295 3460 3625
16.5" 16.5"
10-16.5 FG 6 L2 - - - 771 268 353 278 19.5 - 8.25 FG Loader PR 6 8

10-16.5
Tubeless 8 30.4 10.6 13.9 10.9 - 10 kg 1140 1215 1285 1350 1415 1475 1540 1610 1685 1750 1820
5 lbs 2515 2680 2830 2975 3120 3250 3395 3550 3715 3860 4010
12-16.5 FG 8 L2 - - - 831 315 376 325 20.0 - 9.75 FG PR 8 10
Tubeless 10 32.7 12.4 14.8 12.8 - kg 1470 1565 1655 1740 1820 1905 1980 2075 2170 2540

12-16.5
lbs 3240 3450 3650 3835 4010 4200 4365 4575 4785 5600
12-16.5 8

*Due to factory transfer. For the Load and Inflation Pressure Tables of Bias Tires
For the TKPH(TMPH) Ratings of Bias Tires 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. Compactor Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the ply rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.

62 BIAS TIRE 63
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
18" 18"
15.5/60-18 FG 8 L2 - - - 932 391 416 404 21.5 - W10 kPa 120 140 160 180 200 220 240 260 280 300 325 350 375 400 425 450 475 500

15.5/60-18
Tubeless 36.7 15.4 16.4 15.9 - psi 17 20 23 26 29 32 35 38 41 44 47 51 54 58 62 65 69 73
FG Loader PR 8
10 kg 1525 1670 1805 1935 2060 2195
5 lbs 3360 3680 3980 4265 4540 4840

15.5/70-18
15.5/70-18 FG 8 L2 - - - 1035 405 459 424 20.5 - W13 FG PR 8
Tubeless 40.7 15.9 18.1 16.7 - kg 1725 1885 2040 2185 2325 2455
lbs 3800 4155 4495 4815 5125 5410
20" 20"
9.00-20 RG 10 G1 - - - 1023 267 473 291 15.0 - 7.00T RG Grader PR 10 14
40.3 10.5 18.6 11.5 - GL 40 kg 955 1035 1110 1180 1245 1310 1375 1435 1495 1565 1635 1705 1780 1850 1910 1965 2025
25 lbs 2110 2280 2450 2600 2740 2890 3040 3160 3300 3460 3600 3760 3920 4060 4210 4340 4480
RR 10 C1 - - - 1005 265 458 297 - 310 kPa 350 375 400 425 450 475 500 525 550 575 600 625 650 675 700
39.6 10.4 18.0 11.7 12.2 psi 51 54 58 62 65 69 73 76 80 83 87 91 94 98 102
RR Compactor PR 10
10 kg 2900 3000 3150 3250 3350 3450 3550 3650

9.00-20
5 lbs 6400 6600 6950 7150 7400 7600 7850 8050
GL 14 G2,L2 - - - 1023 255 478 276 21.0 - GL Loader PR 14
40.3 10.0 18.8 10.9 - 10 kg 3150 3250 3350 3450 3450 3550 3630 3710 3790 3875
5 lbs 6950 7150 7400 7600 7600 7850 8000 8190 8360 8550
WL 14 E3 SCR - - 1027 257 466 280 19.5 310 kPa 200 220 240 260 280 300 325 350 375 400 425 450 475 500 525 550
40.4 10.1 18.3 11.0 12.2 psi 29 32 35 38 41 44 47 51 54 58 62 65 69 73 76 80
WL E/M PR 14
50 kg 1280 1350 1420 1490 1555 1620 1695 1770 1845 1915 1985 2055 2120 2185 2245 2310
30 lbs 2820 2980 3130 3280 3430 3570 3740 3900 4070 4220 4380 4530 4670 4820 4950 5090
10.00-20 FG 10 L2 - - - 1064 281 479 307 24.0 - 7.50V kPa 475 500 525 550 575 600 625 650 675 700 725 750
12 41.9 11.1 18.9 12.1 - psi 69 73 76 80 83 87 91 94 98 102 105 109
14 FG Loader PR 10 12 14 16
FGF 16 L2 - - - 1057 276 478 302 18.0 334 FGF 10 kg 3550 3650 3750 3875 4000 4125 4125 4250 4345 4440 4530 4620

10.00-20
41.6 10.9 18.8 11.9 13.1 5 lbs 7850 8050 8250 8550 8800 9100 9100 9350 9580 9790 9990 10180
kPa 200 220 240 260 280 300 325 350 375 400 425 450 475 500
psi 29 32 35 38 41 44 47 51 54 58 62 65 69 73
RL 14 E3 CRT 42 29 1067 285 489 304 22.5 - RL E/M PR 14
42.0 11.2 19.3 12.0 - 50 kg 1445 1530 1610 1685 1760 1830 1920 2005 2085 2170 2245 2320 2395 2470
30 lbs 3190 3370 3550 3710 3880 4030 4230 4420 4600 4780 4950 5110 5280 5450
11.00-20 FG 10 L2 - - - 1100 299 510 323 24.5 352 8.00V kPa 450 475 500 525 550 575 600 625 650 675 700
16 43.3 11.8 20.0 12.7 13.9 psi 65 69 73 76 80 83 87 91 94 98 102
FG Loader PR 10 16
10 kg 3750 3875 4000 4125 4250 4250 4375 4500 4675 4780 4880

11.00-20
5 lbs 8300 8550 8800 9100 9350 9350 9650 9900 10300 10540 10740
RL 14 E3 CRT 49 34 1091 296 514 311 24.0 344 kPa 200 220 240 260 280 300 325 350 375 400 425 450 475
43.0 11.7 20.2 12.2 13.5 psi 29 32 35 38 41 44 47 51 54 58 62 65 69
RL E/M PR 14
50 kg 1570 1660 1750 1830 1910 1990 2085 2180 2270 2355 2440 2525 2605
30 lbs 3460 3660 3860 4030 4210 4390 4600 4810 5000 5190 5380 5570 5740
For the TKPH(TMPH) Ratings of Bias Tires For the Load and Inflation Pressure Tables of Bias Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. Compactor Service : 10km/h (5mph)
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 2) Figures under the ply rating denote the maximun load and inflation pressures.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.

64 BIAS TIRE 65
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
12.00-20 RL 18 E3 SCR 52 36 1138 316 513 331 25.5 382 8.50V kPa 275 300 325 350 375 400 425 450 475 500
44.8 12.4 20.2 13.0 15.0 psi 40 44 47 51 54 58 62 65 69 73
RL E/M PR 18

12.00-20
50 kg 2180 2300 2430 2500 2650 2725 2800 2900 3000 3075
30 lbs 4800 5080 5360 5520 5840 6000 6150 6400 6600 6800
20 Industrial IDU - - RL IDU
Service See characteristics page 78 See characteristics page 79

14.00-20
14.00-20 SCP2 18 E7 - - - SCP2 Sand
See characteristics page 80 See characteristics page 81

14/70-20 RR 12 C1 - - - 970 380 448 392 - - 11.00TG kPa 120 140 160 180 200 220 240 260 280 300 325 350 375 400 425 450

14/70-20
38.2 15.0 17.6 15.4 - psi 17 20 23 26 29 32 35 38 41 44 47 51 54 58 62 65
RR Compactor PR 12
10 kg 2775 2905 3035 3160 3310 3460 3600 3740 3875 4005
5 lbs 6100 6400 6700 6950 7300 7650 7950 8250 8550 8850

17.5/65-20 42x17-20 15.5/70-20

15.5/70-20 FG 10 L2 - - - 1072 410 TBA* TBA* 21.5 - W13 FG Loader PR 10
Tubeless 42.2 16.1 TBA* TBA* - 10 kg 1835 2010 2175 2330 2475 2620 2755 2890
5 lbs 4045 4430 4795 5135 5455 5775 6075 6370
42x17-20 FG 10 L2 - - - 1077 431 TBA* TBA* 25.5 - 14.00TG FG Loader PR 10
42.4 17.0 TBA* TBA* - 10 kg 2740 2915 3080 3240 3395 3545 3690
5 lbs 6040 6425 6790 7140 7485 7815 8135
17.5/65-20 FG 10 L2 - - - 1107 450 TBA* TBA* 25.0 - W14L FG Loader PR 10
Tubeless 43.6 17.7 TBA* TBA* - 10 kg 2130 2330 2520 2700 2875 3040 3195
5 lbs 4695 5135 5555 5950 6340 6700 7045
24" 24"
12.00-24 RL 20 E3 DE2 66 45 1238 326 576 341 24.5 - 8.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550
L3 - - 48.7 12.8 22.7 13.4 - 8.50V psi 40 44 47 51 54 58 62 65 69 73 76 80
RL E/M PR 16 20
16 D2A 1257 330 584 346 391 50 kg 2500 2575 2725 2800 3000 3075 3150 3250 3350 3450 3550 3650
49.5 13.0 23.0 13.6 15.4 30 lbs 5520 5680 6000 6150 6600 6800 6950 7150 7400 7600 7850 8050

12.00-24
STMS 16 L5S D2A - - 1275 321 606 339 55.0 - 8.5 kPa 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825
20 50.2 12.6 23.9 13.3 - 8.50V psi 69 73 76 80 83 87 91 94 98 102 105 109 112 115 120
RL Loader PR 16 20
STMS 10 kg 5000 5150 5300 5450 5600 5600 5800 6000 6150 6270 6410 6540 6660 6780 6900
5 lbs 11000 11400 11700 12000 12300 12300 12800 13200 13600 13790 14100 14390 14700 14900 15200
Industrial IDU - - STMS IDU
Service See characteristics page 78 See characteristics page 79

13.00-24 TG FG 12 G2 DG2 - - 1286 340 588 374 28.0 - 8.00TG kPa 125 150 175 200 225 250 275 300 325 350 375 400 425 450
Tubeless L2 50.6 13.4 23.1 14.7 (10.00VA) psi 18 22 25 29 33 36 40 44 47 51 54 58 62 65

13.00-24 TG
FG Grader PR 10 12
13.00-24 TG 10 G2 G2A - - 40 kg 1700 1900 2060 2240 2360 2500 2650 2725
12 L2 D2A - - 25 lbs 3740 4180 4540 4940 5200 5520 5840 6000
FG Loader PR 12
10 kg 4500 4750 5000 5150 5300 5600
5 lbs 9900 10500 11000 11400 11700 12300
*Due to factory transfer. For the Load and Inflation Pressure Tables of Bias Tires
For the TKPH(TMPH) Ratings of Bias Tires 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. Compactor Service : 10km/h (5mph)
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. 2) Figures under the ply rating denote the maximun load and inflation pressures.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.

66 BIAS TIRE 67
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
14.00-24 RL 28 E3 E2A 109 75 1355 387 627 400 28.0 450 10.00W kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650
24 53.3 15.2 24.7 15.7 17.7 psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94
L3 D2A - - RL E/M PR 24 28
Industrial IDU - - 50 kg 3350 3550 3750 3875 4000 4250 4375 4500 4625 4750 4875 5000 5150 5300 5450 5600
28 Service See characteristics page 78 30 lbs 7400 7850 8250 8550 8800 9350 9650 9900 10200 10500 10700 11000 11400 11700 12000 12300

14.00-24
kPa 425 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825 850
RLS 20 L4 D2A - - 1407 390 646 440 48.0 450 10.00W psi 62 65 69 73 76 80 83 87 91 94 98 102 105 109 112 115 120 124
55.4 15.4 25.4 17.3 17.7 RL Loader PR 12 16 20 24
RLS 10 kg 6300 6500 6700 6900 7100 7300 7500 7750 8000 8250 8250 8500 8670 8830 9000 9170 9330 9500
STMS 20 L5S D2A - - 1373 367 646 391 78.0 - STMS 5 lbs 13900 14300 14800 15200 15700 16100 16500 17100 17600 18200 18200 18700 19100 19500 19800 20200 20600 21000
54.1 14.4 25.4 15.4 - RL IDU
See characteristics page 79

14.00-24 TG FG 14 G2 G2A - - 1336 375 606 374 31.0 - 8.00TG kPa 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500
Tubeless 52.6 14.8 23.9 14.7 - (10.00VA) psi 18 22 25 29 33 36 40 44 47 51 54 58 62 65 69 73
FG Grader PR 12 14 16
12 L2 D2A - - 1336 390 TBA TBA 10.00VA 40 kg 2060 2300 2500 2650 2800 3075 3250 3450 3550 3650
52.6 15.4 TBA TBA 25 lbs 4540 5080 5520 5840 6150 6800 7150 7600 7850 8050

RL 12 L3 D2A - - 1355 387 614 410 28.0 450 10.00VA FG Loader PR 12 14

D2V 53.3 15.2 24.2 16.1 17.7 (8.00TG) RL 10 kg 6300 6500 6700 6900
5 lbs 13900 14300 14800 15200
24 Industrial IDU - - RL IDU

14.00-24 TG
Service RLS
See characteristics page 78
RLS 24 Industrial IDU - -
Service

14.00-24 TG FG 12 G2 G2A - - 1336 375 606 400 31.0 - 8.00TG

52.6 14.8 23.9 15.7 - (10.00VA) See characteristics page 79

16 395 430 10.00VA

15.6 16.9 (8.00TG)

12 L2 D2A 1330 390 TBA TBA 10.00VA

52.3 15.4 TBA TBA

16.00-24 TG FG 16 G2 G2A - - 1453 438 638 500 32.5 - 10.00VA FG Grader PR 16

16.00-24 TG
57.2 17.2 25.1 19.7 - RL 40 kg 2650 3000 3250 3450 3650 4000 4250 4500
25 lbs 5840 6600 7150 7600 8050 8800 9350 9900
RL 16 G3, L3 DG2 - - 1478 419 671 446 33.5 513 RL Loader PR 16
58.2 16.5 26.4 17.6 20.2 10 kg 7100 7300 7750 8000 8250
5 lbs 15700 16100 17100 17600 18200
16.9-24 FG 10 L2 - - - 1320 447 591 462 30.5 - W15L kPa 120 140 160 180 200 220 240
52.0 17.6 23.3 18.2 - psi 17 20 23 26 29 32 35

16.9-24
FG Loader
L2 PR 10
10 kg 2300 2520 2725 2920 3105 3280 3455
5 lbs 5070 5555 6005 6435 6845 7230 7615
18.4-24 FG 10 L2 - - - 1385 483 612 516 32.5 - W16L FG L2 PR 10

18.4-24
54.5 19.0 24.1 20.3 - kg 2765 3025 3270 3505 3725 3940
lbs 6095 6670 7210 7725 8210 8685
25" 25"
15.5-25 FG 12 L2 D2A - - 1284 410 565 399 23.5 - 12.00/1.3 kPa 225 250 275 300 325 350 375 400
Tubeless 50.6 15.7 22.2 15.7 - psi 33 36 40 44 47 51 54 58

15.5-25
FG Loader PR 12
VL2 12 L3 D2A - - 1284 410 568 448 27.0 - VL2 10 kg 4000 4250 4500 4750 4875 5150 5300 5600
50.6 15.6 22.4 17.6 - 5 lbs 8800 9350 9900 10500 10700 11400 11700 12300

For the TKPH(TMPH) Ratings of Bias Tires For the Load and Inflation Pressure Tables of Bias Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. Compactor Service : 10km/h (5mph)
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 2) Figures under the ply rating denote the maximun load and inflation pressures.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.
68 BIAS TIRE 69
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
16.00-25 RL 28 E3 E2A 139 95 1478 432 671 459 33.5 513 11.25/2.0 kPa 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575
Tubeless 58.2 17.0 26.4 18.1 20.2 psi 33 36 40 44 47 51 54 58 62 65 69 73 76 80 83
RL E/M PR 28
50 kg 4375 4625 4875 5000 5300 5450 5600 5800 6000 6300 6500 6500 6700
30 lbs 9650 10200 10700 11000 11700 12000 12300 12800 13200 13900 14300 14300 14800
28 Industrial IDU - - RL IDU
32 Service RLS

16.00-25
YS2
RLS 28 Industrial IDU - -
32 Service
See characteristics page 78
YS2 32 Industrial IDU - - See characteristics page 79
Service

16.00-25 RL 28 Industrial IDU - -

Service

17.5-25 FG 12 G2, L2 DG2 - - 1345 450 596 472 27.5 - 14.00/1.5 kPa 125 150 175 200 225 250 275
Tubeless 16 53.0 17.7 23.5 18.6 - psi 18 22 25 29 33 36 40
FG Grader PR 12 16
VL2 16 L3 D2A - - 1348 444 597 470 30.5 - 40 kg 2120 2360 2575 2900 3000 3150 3350
53.1 17.5 23.5 18.5 - 25 lbs 4680 5200 5680 6400 6600 6950 7400
For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
DL 16 L5 D2A - - 1410 445 656 470 69.5 -

17.5-25
For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.
55.5 17.5 25.8 18.5 -
kPa 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575
STMS 20 L5S D2A - - 1385 450 645 462 69.0 - psi 33 36 40 44 47 51 54 58 62 65 69 73 76 80 83
D2Z 54.5 17.7 25.4 18.2 - FG Loader PR 12 16 20
VL2 10 kg 4750 5000 5300 5600 5800 6150 6300 6700 6900 7100 7300 7500 7750 8000 8250
17.5-25 VL2 16 L3 D2A - - 1348 444 597 470 30.5 - DL 5 lbs 10500 11000 11700 12300 12800 13600 13900 14800 15200 15700 16100 16500 17100 17600 18200
53.1 17.5 23.5 18.5 - STMS

18.00-25 RL 32 E3 E2A 173 118 1602 503 727 572 37.5 587 13.00/2.5 RL E/M PR 32
Tubeless 63.1 19.8 28.6 22.5 23.1 50 kg 5600 6000 6300 6500 6900 7100 7300 7500 7750 8000 8250 8500 8750
30 lbs 12300 13200 13900 14300 15200 15700 16100 16500 17100 17600 18200 18700 19300
36 Industrial IDU - - kPa 375 400 425 450 475 500 525 550 575 600 625 650 675 700 725 750
40 Service psi 54 58 62 65 69 73 76 80 83 87 91 94 98 102 105 109
STMS Loader PR 24 28 32
See characteristics page 78

18.00-25
ELS2 40 Industrial IDU - - 10 kg 10000 10450 10900 11500 11500 11800 12150 12500 12850 13200 13600 13600 14000 14500 14500 15000
Service 5 lbs 22000 23000 24000 25400 25400 26000 26800 27600 28300 29100 30000 30000 30900 32000 32000 33100
RL IDU
STMS 24 L5S D2A - - 1675 520 762 550 84.0 - 13.00/2.5 ELS2
28 65.9 20.5 30.0 21.7 - STMS
32 See characteristics page 79
40 Industrial IDU - -
Service See characteristics page 78

70 BIAS TIRE 71
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
20.5-25 FG 12 G2, L2 DG2 - - 1493 534 652 551 29.5 - 17.00/1.7 kPa 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525
Tubeless 58.8 21.0 25.7 21.7 - (12,16PR) psi 18 22 25 29 33 36 40 44 47 51 54 58 62 65 69 73 76
17.00/2.0 VL2 E/M PR 16 20 24
VL2 16 E3 DE2 80 55 1494 542 641 587 33.0 - 50 kg 4125 4500 4875 5150 5450 5800 6000 6300 6500 6700
20 L3 - - 58.8 21.3 25.2 23.1 - 30 lbs 9100 9900 10700 11400 12000 12800 13200 13900 14300 14800
24 FG Grader PR 12
DL 12 L5 D2A - - 1558 548 714 570 79.5 - 40 kg 2800 3150 3550

20.5-25
16 61.3 21.6 28.1 22.4 - 25 lbs 6150 6950 7850
For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
20.5-25 FG 12 G2, L2 DG2 - - 1493 534 652 551 29.5 - For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.
58.8 21.0 25.7 21.7 -
FG Loader PR 12 16 20 24
VL2 16 L3 D2A - - 1494 542 641 587 33.0 - VL2 10 kg 6300 6700 7100 7500 7750 8250 8500 8750 9250 9500 9750 10000 10300
20 58.8 21.3 25.2 23.1 - DL 5 lbs 13900 14800 15700 16500 17100 18200 18700 19300 20400 20900 21500 22000 22700

21.00-25 RL 40 Industrial IDU - - RL IDU

21.00-25
Tubeless Service See characteristics page 78 See characteristics page 79

23.5-25 VL2 16 E3 DE2 107 73 1607 618 682 688 43.0 - 19.50/2.5 kPa 175 200 225 250 275 300 325 350 375 400 425 450 475
Tubeless 20 L3 - - 63.3 24.3 26.9 27.1 - psi 25 29 33 36 40 44 47 51 54 58 62 65 69
24 VL2 Loader PR 16 20 24
20 D2A RLS 10 kg 8000 8500 9000 9500 10000 10600 10900 11200 11800 12150 12500
DL 5 lbs 17600 18700 19800 20900 22000 23400 24000 24700 26000 26800 26700
RLS 16 L4 D2A - - 1658 615 724 668 67.5 -

23.5-25
65.3 24.2 28.5 26.3 - VL2 E/M PR 16 20 24
50 kg 5300 5800 6150 6500 6900 7300 7750 8000
DL 20 L5 D2A - - 1673 616 779 646 88.0 - 30 lbs 11700 12800 13600 14300 15200 16100 17100 17600
65.9 24.3 30.7 25.4 -

23.5-25 VL2 16 L3 D2A - - 1607 618 682 688 43.0 -

20 63.3 24.3 26.9 27.1 -
24
For the TKPH(TMPH) Ratings of Bias Tires For the Load and Inflation Pressure Tables of Bias Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. Compactor Service : 10km/h (5mph)
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 2) Figures under the ply rating denote the maximun load and inflation pressures.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.

72 BIAS TIRE 73
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
26.5-25 VL2 20 E3 DE2 132 90 1738 683 745 734 44.0 - 22.00/3.0 kPa 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 630
Tubeless 24 L3 - - 68.4 26.9 29.3 28.9 - psi 25 29 33 36 40 44 47 51 54 58 62 65 69 73 76 80 92
26 VL2 E/M PR 20 24 26
16 D2A 50 kg 6700 7300 7750 8250 8750 9250 9500
24 30 lbs 14800 16100 17100 18200 19300 20400 20900
RLS 26 L4 D2A - - 1785 700 800 736 67.0 -
70.3 27.6 31.5 29.0 - VL2 Loader PR 16 20 24 26 32 36
RLS 10 kg 10000 10900 11500 12150 12500 13200 13600 14000 14500 15000 15500 16000 16500 17000 18600

26.5-25
DL 20 L5 D2A - - 1798 694 815 727 97.0 - DL 5 lbs 22000 24000 25400 26800 27600 29100 30000 30900 32000 33100 34200 35300 36480 37500 41000
26 70.8 27.3 32.1 28.6 - STMS

STMS 32 L5S D2A - - 1798 680 827 719 95.0 -

36 70.8 26.8 32.6 28.3 -

26.5-25 VL2 20 L3 D2A - - 1738 683 745 734 44.0 -

24 68.4 26.9 29.3 28.9 -

29.5-25 VL2 22 E3 DE2 150 103 1850 770 792 833 49.0 - 25.00/3.5 VL2 E/M PR 22 28
Tubeless 28 L3 - - 72.8 30.3 31.2 32.8 - 50 kg 8000 8750 9250 10000 10600 10900 11500
30 lbs 17600 19300 20400 22000 23400 24000 25400
RLS 28 L4 D2A - - 1912 784 813 805 74.0 - VL2 Loader PR 28

29.5-25
75.3 30.9 32.0 31.7 - RLS 10 kg 12150 12850 13600 14500 15000 16000 16500 17000 17500
DL 5 lbs 26800 28300 30000 32000 33100 35300 36480 37500 38600
DL 28 L5 D2A - - 1900 768 873 805 105.5 -
74.8 30.2 34.4 31.7 -

26" 26"
23.1-26 AL2 8 C2 - - - 1472 595 654 618 19.0 - DW20A kPa 110
Tubeless 58.0 23.4 25.7 24.3 - DW20B psi 16

23.1-26
AL2 Compactor PR 8
23.1-26 AL2 8 C2 - - - 1472 595 654 618 19.0 - 10 kg 2850
58.0 23.4 25.7 24.3 - 5 lbs 6285

29" 29"
29.5-29 STMS 34 L5S D2A - - 2023 749 931 792 103.0 - 25.00/3.5 kPa 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525
Tubeless D2Z 79.6 29.5 36.7 31.2 - psi 25 29 33 36 40 44 47 51 54 58 62 65 69 73 76

29.5-29
STMS Loader PR 34
10 kg 12850 14000 14500 15500 16000 17000 17500 18000 19000 19500 20000 20600 21200
5 lbs 28300 30900 32000 34200 35300 37500 38600 39700 41900 43000 44100 45400 46700
32" 32"
30.5L-32 TGS 16 LS2 S2V - - 1847 780 840 790 56.0 - DW27A kPa 105 140 170 210 245 270
72.7 30.7 33.1 31.1 - DW27B psi 15 20 25 30 36 40
TGS Logging PR 16 32km/h(20mph) Maximum Speed

30.5L-32
kg 4710 5370
lbs 10390 11840
PR 16 16km/h(10mph) Maximum Speed
kg 4345 5140 5855 6520 7130
lbs 9580 11330 12910 14370 15720
For the TKPH(TMPH) Ratings of Bias Tires For the Load and Inflation Pressure Tables of Bias Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. Compactor Service : 10km/h (5mph)
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 2) Figures under the ply rating denote the maximun load and inflation pressures.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.

74 BIAS TIRE 75
TRA Code Approximate Inflated Dimensions Minimum Recommended Application
Ply OTD Dual Spacing Rim/Flange Height Max.Speed
Tire Size Pattern or Spec TKPH TMPH OD OW SLR SLW Pattern Tire Load Limits at Various Cold Inflation Pressures Size
Rating mm mm mm mm mm mm km/h
Application inch inch inch inch inch inch mph
33" 33"
18.00-33 RLS 32 E4 E2A 161 110 1877 504 860 530 56.5 587 13.00/2.5 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625
Tubeless 73.9 19.8 33.9 20.9 23.1 psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91
RLS E/M PR 32

18.00-33
ELS2 50 kg 6500 6900 7300 7500 8000 8250 8500 8750 9000 9250 9750 10000 10300
ELS2 32 E4 E2A 161 110 1860 509 887 533 66.5 587 30 lbs 14300 15200 16100 16500 17600 18200 18700 19300 19800 20400 21500 22000 22700
73.2 20.0 34.9 21.0 23.1
36 Industrial IDU - - ELS2 IDU
Service See characteristics page 78 See characteristics page 79

35/65-33 NL 24 L4 D2V - - 2085 890 953 928 62.5 - 28.00/3.5 NL Loader PR 24 30 42

Tubeless 30 82.1 35.0 37.5 36.5 - DL 10 kg 16500 17000 18000 19000 19500 20000 21200 21800 22400 23000 23600 24300 25000 25750 26500

35/65-33
5 lbs 36480 37500 39700 41900 43000 44100 46700 48100 49400 50700 52000 53600 55100 56800 58400
DL 42 L5 D2V - - 2085 890 979 945 97.0 -
82.1 35.0 38.5 37.2 97.0 -

35" 35"
21.00-35 RL 40 Industrial IDU - - RL IDU
Tubeless Service ELS2

21.00-35
See characteristics page 80 See characteristics page 81
ELS2 40 Industrial IDU - -
Service

37.25-35 RL 36 E3 E1A 358 245 2330 955 1060 1000 51.5 - 31.00/4.0 kPa 175 200 225 250 275 300 325

37.25-35
Tubeless 91.7 37.6 41.7 39.4 - psi 25 29 33 36 40 44 47
RL E/M PR 36
50 kg 13600 14500 15500 16500 17500 18500 19500
30 lbs 30000 32000 34200 36400 38600 40800 43000
39" 39"
40/65-39 DL 56 L5 D2V - - 2420 1020 1112 1070 106.5 - 32.00/4.0 kPa 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650 675 700

40/65-39
Tubeless 95.3 40.2 43.8 42.1 - psi 40 44 47 51 54 58 62 65 69 73 76 80 83 87 91 94 98 102
DL Loader
L5 PR 56
10 kg 22400 23600 25000 25750 27250 28000 29000 30000 30750 31500 32500 34500 34500 36500 37500 38750 40000 41250
5 lbs 49400 52000 55100 56800 60000 61500 64000 66000 68000 69500 71500 76100 76000 80500 82700 85400 88200 90900

41.25/70-39
41.25/70-39 DL 42 L5 D2V - - 2510 1054 1145 1104 115.5 - 32.00/4.5 DL L5 PR 42
Tubeless 98.8 41.5 45.1 43.5 - kg 27250 29000 30000 31500 32500 33500 35500 36500 37500
lbs 60000 64000 66000 69500 71500 74000 78500 80500 82500
45" 45"

45/65-45
45/65-45 DL 58 L5 D2V - - 2730 1146 1261 1185 116.0 - 36.00/4.5 DL Loader PR 58
Tubeless 107.5 45.1 49.6 46.6 - 10 kg 30000 31500 32500 34500 35500 37500 38750 40000 41250 42500 43750 45000 46250 47250 48250 49250 50000
5 lbs 66000 69500 71500 76000 78500 82500 85500 88000 91000 93500 96500 99000 102000 104200 106400 108600 110000
51" 51"

50/65-51
50/65-51 DL 62 L5 D2A - - 3070 1260 1412 1300 127.5 - 40.00/4.5 DL Loader PR 62
Tubeless D2V 120.9 49.6 55.6 51.2 - 10 kg 37500 40000 42500 43750 46250 47500 48750 51500 53000 54500 56000 58000 58000 60000 61500 63000
5 lbs 82500 88000 93500 96500 102000 104500 107500 113500 117000 120000 123500 128000 128000 132500 135500 139000
57" 57"

65/65-57
65/65-57 DL 62 L5 D2V - - 3735 1640 1672 1706 142.5 - 52.00/6.0 DL Loader PR 62
Tubeless 147.0 64.6 65.8 67.2 - 10 kg 67000 71000 73000 77500 80000 82500 87500 90000 92500 95000
5 lbs 147500 156500 161000 171000 176500 182000 193000 198500 204000 209500
For the TKPH(TMPH) Ratings of Bias Tires For the Load and Inflation Pressure Tables of Bias Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative. 1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%. Compactor Service : 10km/h (5mph)
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative. 2) Figures under the ply rating denote the maximun load and inflation pressures.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative. 3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) For Load & Carry operations, tire load limit will be adjusted following the table of page 83.

76 BIAS TIRE 77
TRA Code Approximate Inflated Dimensions Minimum Recommended
Ply OTD Ply Inflation
OD OW SLR SLW Dual Spacing Rim/Flange Height
Tire Size Pattern or Pattern Appli. Tire Load Limits at Various Speeds Size
Rating mm mm mm mm mm mm Rating Pressure
Application inch inch inch inch inch inch
Industrial Service Industrial Service
20" 20"
12.00-20 RL 20 Industrial 1138 316 507 348 24.0 378 8.50V kPa km/h 0 Creep 5 10 15 20 25 30
Service 44.8 12.4 20.0 13.7 14.9 psi mph Static Creep 3 5 9 12 15 19

12.00-20
RL IDU 20 Load 1000 kg 11880 10560 9570 8910 8580 8380 8250 8185
Wheel 145 lbs 26200 23290 21100 19650 18920 18480 18190 18050
Steering 1000 kg 9505 8450 7655 7130 6865 6705 6600 6550
Wheel 145 lbs 20960 18630 16880 15720 15135 14785 14550 14440
24" 24"
12.00-24 STMS 20 Industrial 1275 321 606 339 55.0 391 8.50V STMS IDU 20 Load 1000 kg 12420 11040 10005 9315 8970 8765 8625 8555

12.00-24
Service 50.2 12.6 23.9 13.3 15.4 Wheel 145 lbs 27385 24345 22060 20540 19780 19320 19020 18865
Steering 1000 kg 9935 8830 8005 7450 7175 7010 6900 6845
Wheel 145 lbs 21910 19475 17650 16430 15825 15455 15215 15090
14.00-24 RL 24 Industrial 1355 367 627 400 28.0 450 10.00W RL IDU 24 Load 1000 kg 17100 15200 13775 12825 12350 12065 11875 11780
28 Service 53.3 14.4 24.7 15.7 17.7 RLS Wheel 145 lbs 37705 33515 30375 28280 27230 26605 26185 25975
Steering 1000 kg 13680 12160 11020 10260 9880 9650 9500 9425

14.00-24
14.00-24 TG RL 24 Industrial 1360 395 614 410 28.0 450 10.00VA Wheel 145 lbs 30165 26810 24300 22625 21785 21280 20945 20780
Tubeless Service 53.5 15.6 24.2 16.1 17.7 28 Load 1000 kg 18000 16000 14500 13500 13000 12700 12500 12400
Wheel 145 lbs 39690 35280 31970 29765 28665 28005 27560 27340
RLS 24 Industrial 1407 390 646 440 48.0 - Steering 1000 kg 14400 12800 11600 10800 10400 10160 10000 9920
Service 55.4 15.4 25.4 17.3 - Wheel 145 lbs 31750 28225 25580 23815 22930 22400 22050 21875

25" 25"
16.00-25 RL 28 Industrial 1495 445 671 459 33.5 513 11.25/2.0 RL IDU 28 Load 900 kg 20700 18400 16675 15525 14950 14605 14375 14260
Tubeless 32 Service 58.9 17.5 26.4 18.1 20.2 RLS Wheel 131 lbs 45645 40570 36770 34230 32965 32205 31695 31445
YS2 Steering 900 kg 16560 14720 13340 12420 11960 11685 11500 11410
RLS 28 Industrial 1548 438 722 460 57.0 513 Wheel 131 lbs 36515 32455 29415 27385 26370 25765 25355 25155
32 Service 60.9 17.2 28.4 18.1 20.2 32 Load 1000 kg 22500 20000 18125 16875 16250 15875 15625 15500

16.00-25
Wheel 145 lbs 49610 44100 39965 37210 35830 35005 34455 34175
YS2 32 Industrial 1465 430 658 472 49.2 513 Steering 1000 kg 18000 16000 14500 13500 13000 12700 12500 12400
Service 57.7 16.9 25.9 18.6 20.2 Wheel 145 lbs 39690 35280 31970 29765 28665 28005 27560 27340

16.00-25 RL 28 Industrial 1478 445 671 459 33.5 513

Service 58.2 17.5 26.4 18.1 20.2

18.00-25 RL 36 Industrial 1608 508 727 572 36.0 587 13.00/2.5 RL IDU 36 Load 1000 kg 28800 25600 23200 21600 20800 20320 20000 19840
Tubeless 40 Service 63.3 20.0 28.6 22.5 23.1 ELS2 Wheel 145 lbs 63505 56450 51155 47630 45865 44805 44100 43745
STMS Steering 1000 kg 23040 20480 18560 17280 16640 16255 16000 15870

18.00-25
ELS2 40 Industrial 1685 515 796 530 66.5 587 Wheel 145 lbs 50805 45160 40925 38100 36690 35845 35280 34995
Service 66.3 20.3 31.3 20.9 23.1 40 Load 1000 kg 30600 27200 24650 22950 22100 21590 21250 21080
Wheel 145 lbs 67475 59975 54355 50605 48730 47605 46855 46480
STMS 40 Industrial 1675 520 762 550 84.0 587 Steering 1000 kg 24480 21760 19720 18360 17680 17270 17000 16865
Service 65.9 20.5 30.0 21.7 23.1 Wheel 145 lbs 53980 47980 43480 40485 38985 38085 37485 37185

21.00-25 RL 40 Industrial 1745 560 775 620 41.0 668 15.00/3.0 RL IDU 40 Load 1000 kg 36385 32345 29310 27290 26280 25670 25270 25065

21.00-25
Tubeless Service 68.7 22.0 30.5 24.4 26.3 Wheel 145 lbs 80230 71320 64630 60170 57950 56610 55720 55270
Steering 1000 kg 29110 25875 23450 21830 21025 20535 20215 20050
Wheel 145 lbs 64185 57055 51705 48135 46360 45290 44575 44215
33" 33"
18.00-33 ELS2 36 Industrial 1860 509 887 533 66.5 587 13.00/2.5 ELS2 IDU 36 Load 1000 kg 33300 29600 26825 24975 24050 23495 23125 22940

18.00-33
Tubeless Service 73.2 20.0 34.9 21.0 23.1 Wheel 145 lbs 73425 65270 59150 55070 53030 51805 50990 50580
Steering 1000 kg 26640 23680 21460 19980 19240 18795 18500 18350
Wheel 145 lbs 58740 52215 47320 44055 42425 41445 40790 40465

78 BIAS TIRE 79
TRA Code Approximate Inflated Dimensions Minimum Recommended
Ply OTD Ply Inflation
OD OW SLR SLW Dual Spacing Rim/Flange Height
Tire Size Pattern or Pattern Appli. Tire Load Limits at Various Speeds Size
Rating mm mm mm mm mm mm Rating Pressure
Application inch inch inch inch inch inch
35" 35"
21.00-35 RL 40 Industrial 2000 575 937 648 41.0 701 15.00/3.0 kPa km/h 0 Creep 5 10 15 20 25 30
Tubeless Service 78.7 22.6 36.9 25.5 27.6 psi mph Static Creep 3 5 9 12 15 19

21.00-35
RL IDU 40 Load 1000 kg 43740 38880 35235 32805 31590 30860 30375 30130
ELS2 40 Industrial 2040 592 955 617 67.0 701 ELS2 Wheel 145 lbs 96445 85730 77695 72335 69655 68050 66975 66440
Service 80.3 23.3 37.6 24.3 27.6 Steering 1000 kg 34990 31105 28190 26245 25270 24690 24300 24105
Wheel 145 lbs 77155 68585 62155 57870 55725 54440 53580 53150

Off-the-Road Tires Used for Industrial Vehicle Applications

1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log
stackers etc., used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative.
5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.
6) For RTG (Rubber Tired Gantry Crane) operation, consult a Bridgestone Representative.

TRA Code Approximate Inflated Dimensions Minimum Recommended

Ply OTD Max.
OD OW SLR SLW Dual Spacing Rim/Flange Height
Tire Size Pattern or Pattern Appli. Tire Load Limits at Various Cold Inflation Pressures (100kPa = 1bar) Size
Rating mm mm mm mm mm mm Speed
Application inch inch inch inch inch inch
Sand Service Sand Service When tires are to be used under conditions other than those recommended above, consult a Bridgestone Representative.
20" 20"
14.00-20 SCP2 18 E7 1206 370 TBA* TBA* 10.5 - 9.00V kPa 70 100 140 170 210 240
47.5 14.6 TBA* TBA* - psi 10 15 20 25 30 35
SCP2 Sand 10km/h kg 1960 2485 2950 3355 3720 4080

14.00-20
5mph lbs 4320 5480 6500 7400 8200 9000
50km/h kg 1340 1695 2015 2285 2550 2790
30mph lbs 2950 3740 4440 5040 5620 6150
65km/h kg 1135 1435 1695 1940 2160 2360
40mph lbs 2500 3160 3740 4280 4760 5200
*Due to factory transfer.

80 BIAS TIRE 81
4. Remarks 4.2 The Variation in Load Carrying Capacity with Operating Speed
Operating Speed
E2, E3, E4** G L***
4.1 Excess Load (km/h)
Static +60%
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the appropriate above-listed Creep +30%
load tables are often encountered. *
5 +14%
These excess loads result from items such as actual vehicle weight exceeding the design weight, varying density of 10 0
materials, field modifications to the equipment, load transfer, etc. 15 +12% - -13%
Only under these conditions, the actual tire load in service may exceed the above load ratings for the tire(*) by an 20 +10% -
amount not greater than shown in the following table: 25 +8% -20%
30 +6%
L** 35 +4% -26%
E2, E3, E4*
L5/L5S*** 40 +3% 0 -30%
Maximum Excess Load 15% 15% 0% 45 +2% -
Maximum Excess Pressure 30% 30% +100kPa 50 0 -9%
825kPa 825kPa 55 * -
Maximum Pressure 60 * -18%
120psi 120psi
65 * -27%
(except for underground vehicles)
70 *
75 *
When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads. Reference speed for calculating load variance
80 *
For each 1% increase in load, the inflation pressure must be increased by 2%. * Consult a Bridgestone Representative
80< *

*except following sizes on the list 9.00-20 10.00-20 11.00-20 **except following sizes on the list 9.00-20 10.00-20 11.00-20
**except following sizes on the list ***except following sizes on the list

5.70-12 33x12.5-15 12-16.5 15.5/70-18 17.5/65-20 5.70-12 33x12.5-15 12-16.5 15.5/70-18 17.5/65-20
23x8.50-12 12.5/70-16 12.5/65-18 15.5/70-20 16.9-24 23x8.50-12 12.5/70-16 12.5/65-18 15.5/70-20 16.9-24
27x8.50-15 10-16.5 15.5/60-18 42x17-20 18.4-24 27x8.50-15 10-16.5 15.5/60-18 42x17-20 18.4-24

***For L5/L5S tyres following sizes on the list, on front tires for front end loaders, it is permissible to increase inflation This table doesn't secure to prevent the risk derived from heat buildup.
pressure up to 100kPa (15psi) above, with no increase in load.
(Maximum inflation pressure should not exceed 825 kPa (120psi).)
4.3 Load-and-Carry Operations for Front End Loader Service
17.5-25 26.5-25 35/65-33 45/65-45
Service conditions of a loader is defined as “picking up material and relocating a short distance away, a maximum of
20.5-25 29.5-25 40/65-39 50/65-51
76m (250 feet), one way, with a maximum speed of 10km/h (5mph)”. However, a loader can pick up a load and
23.5-25 29.5-29 41.25/70-39 65/65-57
transport such load to another location and return unloaded for a longer distance. This type of service is called Load-
and-Carry operations. Transportation usually occurs at low speeds, up to 25km/h (15mph), and distances are limited.
The tires when used in Load-and-Carry operations may encounter heat problems especially on the front axle tires.
To avoid such problems, Bridgestone recommends the following operating conditions.
The maximum excess loads will result in reduced tire performance. For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while considering Ton-Kilometer-
Per-Hour (Ton-Mile-Per-Hour) limits. Please consult Bridgestone representative for more information.
If you need to use the tire beyond this recommendation, please consult Bridgestone
representative.

For Bias Tires

Load Capacity**
10km/h (5mph) Maximum Cycle Allowable Average
Tread Inflation Pressure
Class for Front Tires Distance Work-shift Speed
Rim Diameter
(m) (km/h)
29" and below 33" and above
L2, L3 Standard inflation 85% of 1200 10
L4 pressure 90% of STD. load 500
L5 + STD. load 3
100kpa (15psi) *** 300
L5S
** STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service”.
***Not permissible
The inflation pressure should not exceed 825kPa (120psi).

82 BIAS TIRE 83
OTHER SPECIFICATION
1. O-Ring Specifications 3. Rim and Valve
Inner Inner
Code Applicable Size Diameter Circumference
Code Applicable Size Diameter Circumference
No. No.
Radial Bias mm inch mm inch Radial Bias mm inch mm inch
P-24A 13.00R24 TG 13.00-24 TG 6.6 0.26 1768 69.61 P-33B 18.00R33 18.00-33 9.8 0.39 2382 93.78
14.00R24 TG 14.00-24 TG 21.00R33 -
16.00R24 TG - 35/65R33 35/65-33
P-25AX 14.00R25* - 6.8 0.27 1779 70.04 P-35B 21.00R35 21.00-35 9.8 0.39 2572 101.26
15.5R25 15.5-25 24.00R35 -
17.5R25 17.5-25 29.5R35 -
20.5R25 20.5-25 33.25R35 -
29.5R25 - 37.25R35 37.25-35
385/95R25 - P-39B 37.5R39 - 9.8 0.39 2900 114.17
445/80R25 - - 40/65-39
445/95R25 - 40.5/75R39 -
P-25B 14.00R25** - 9.8 0.39 1779 70.04 - 41.25/70-39
16.00R25 16.00-25 45/65R39 -
17.5R25 17.5-25 P-45B 45/65R45 45/65-45 9.8 0.39 3326 130.94
18.00R25 18.00-25 P-49B 24.00R49 - 9.8 0.39 3611 142.17
20.5R25 20.5-25 27.00R49 -
21.00R25 21.00-25 31/90R49 -
23.5R25 23.5-25 P-51C 30.00R51 - 12.7 0.5 3694 145.43
25/65R25 - 33.00R51 -
26.5R25 26.5-25 36.00R51 -
29.5R25 29.5-25 50/65R51 50/65-51
30/65R25(750/65R25) - P-57C 37.00R57 - 12.7 0.5 4129 162.56
385/95R25 - 40.00R57 -
445/80R25 - 42/90R57 -
Rim Width
445/95R25 - 46/90R57 -
505/95R25 - 50/90R57 -
525/80R25 - 55.5/80R57 - Rim Flange
550/65R25 - 60/80R57 -
600/65R25 - - 65/65-57
650/65R25 - P-63C 53/80R63 - 12.7 0.5 4580 180.31 Rim Flange
750/65R25 - 59/80R63 - Bead-Seat Band
P-29B 29.5R29 29.5-29 9.8 0.39 2127 83.74
Rim Base
* For Rim Size 10.00-25
33.25R29 - ** For Rim Size 11.25-25
775/65R29 - Lock Ring
875/65R29 -

Locking Key
2. Flap Specifications Bead Seat (part of lock ring)
DB G1 P
Flap
mm inch mm inch mm inch
550/600-15 1175 46.3 4.0 0.16 129 5.1
650/700/750-15 1177 46.3 4.5 0.18 169 6.7 Nominal
12/65B-15 1196 47.1 7.0 0.28 270 10.6 Diameter
750/825AR15 1201 47.3 6.0 0.24 184 7.2 Valve Hole Valve-Stem
750/825-R16 1255 49.4 5.0 0.20 174 6.9
Support
200D1000-R15 1201 47.3 6.5 0.26 205 8.1
700A825-R20 1255 49.4 5.0 0.20 180 7.1
900A111-R20 1201 47.3 6.0 0.24 205 8.1
1100B13/80-R20 1594 62.8 6.5 0.26 218 8.6 O-Ring
1400/14/80R20 1594 62.8 8.5 0.33 240 9.4
1300A1600-20 1618 63.7 8.0 0.31 246 9.7
42x17-20 1576 62.1 9.0 0.35 390 15.4

8.50V 24
14/70-20 1587 62.5 9.0 0.35 331 13.0
1300-24 1916 75.4 9.0 0.35 229 9.0 P
1200A1400-24,25 1942 76.5 9.0 0.35 232 9.1 G1
1100B1300-R24 1922 75.7 7.5 0.30 220 8.7
1300/1400-24,25 1942 76.5 9.0 0.35 232 9.1 DB
1400/1600R24,25 1942 76.5 9.0 0.35 260 10.2 Nominal Diameter of Rim (inches)
1600-24,25 1916 75.4 9.0 0.35 293 11.5
Flange Type
155A1800-24,25 1926 75.8 6.0 0.24 340 13.4
235-25 1934 76.1 9.0 0.35 560 22.1 Rim Width (inches)
265-25 2010 79.1 12.0 0.47 570 22.4
2100R33 2553 100.5 9.0 0.35 413 16.3
Flap

84 OTHER SPECIFICATION 85
3.1 Rim Designation
Full Tapered Bead Seat Rims (5 pieces) Full Tapered Bead Seat Rims (3 pieces) Semi Drop Center Rims (SDC) Flat Base Rims
A B D E

Recommended Rim/ Tire Size Recommended Rim/ Tire Size Recommended Rim/ Tire Size Recommended Rim/ Tire Size
Flange Height Radial Bias Flange Height Radial Bias Flange Height Radial Bias Flange Height Radial Bias
11.00/1.5 14.5R15 - 10.00/1.5 14.00R25 14.00-25 6.00GS - 7.50-15 6.50T 8.25R15 -
11.25/2.0 16.00R25 16.00-25 385/95R25(14.00R25) - - 7.50-16 - 8.25-20
445/95R25(16.00R25) - 12.00/1.3 15.5R25 15.5-25 8.00TG 13.00R24 TG - 7.00T 9.00R20 9.00-20
13.00/2.5 18.00R25 18.00-25 14.00/1.5 17.5R25 17.5-25 - 14.00-24 TG 7.50V 10.00R15 -
505/95R25(18.00R25) - 445/80R25(17.5R25) - 10.00F - 33x12.5-15 - 10.00-20
18.00R33 18.00-33 550/65R25 - 10.00VA - 13.00-24 TG - 14.00-20
15.00/3.0 21.00R25 21.00-25 17.00/2.0 550/65R25 - 14.00R24 TG 14.00-24 TG 8.00V 11.00R20 11.00-20
21.00R33 - 17.00AL/1.7(1only) 20.5R25 - 16.00R24 TG 16.00-24 TG 8.5 - 12.00-24
21.00R35 21.00-35 17.00/1.7 - 20.5-25 11x20 335/80R20 - 8.50V 12.00R20 12.00-20
17.00/2.0 550/65R25 - 600/65R25 - 365/80R20 - 12.00R24 12.00-24
600/65R25 - 17.00/2.0 20.5R25 20.5-25 11.00TG - 14/70-20 9.00 12R22.5 -
17.00/3.5 24.00R35 24.00-35 525/80R25(20.5R25) - 13x20 405/70R20 - 9.00V - 14.00-24
24.00R49 - 14.00TG - 42x17-20 10.00WI 14.00R20 -
18.00/1.5 24R21 - 10.00W 16.00R20 -
19.50/2.5 23.5R25 23.5-25 14.00R24 14.00-24
600/65R25 -
Drop Center Rims (DC, W, DW) 385/95R24(14.00R24) -
650/65R25 - C 385/95R25(14.00R25) -
19.50/4.0 27.00R49 -
31/90R49 -
20.00/2.0 25/65R25 -
22.00/3.0 750/65R25(30/65R25) -
Recommended Rim/ Tire Size
26.5R25 26.5-25
Flange Height Radial Bias
22.00/4.5 30.00R51 -
24.00/3.0 750/65R25(30/65R25) - 5JA - 23x8.50-12
24.00/3.5 775/65R29 - 4.50E - 5.50-15
24.00/5.0 33.00R51 - 5.1/2K - 9.00-15
25.00/3.5 29.5R25 29.5-25 5.50F - 9.00-15
775/65R29 - 7JA - 23x8.50-12
29.5R29 29.5-29 - 27x8.50-15 A B
29.5R35 - - 9.5/65-15
26.00/5.0 36.00R51 - 11LB - 14.0/65-15
27.00/3.5 875/65R29 - 6LB - 7.50-16
33.25R29 - 8LB - 10.5/80-16
33.25R35 - 10LB - 12.5/70-16
27.00/6.0 37.00R57 - 8.25 - 10-16.5
42/90R57 - 9.75 - 12-16.5
28.00/3.5 875/65R29 - W13 - 15.5/70-18
35/65R33 35/65-33 - 15.5/70-20
29.00/6.0 40.00R57 - W14L - 17.5/65-20
46/90R57 - - 16.9-24
31.00/4.0 37.25R35 37.25-35 W15L - 18.4-24
32.00/4.0 - 40/65-39 DW20B - 23.1-26 C D E
32.00/4.5 37.5R39 - DW27B - 30.5L-32
40.5/75R39 -
- 41.25/70-39
45/65R39 -
32.00/6.5 50/90R57 -
34.00/6.5 50/90R57 -
36.00/4.5 45/65R39 -
45/65R45 45/65-45
36.00/5.0 53/80R63 -
40.00/4.5 50/65R51 50/65-51
41.00/5.0 59/80R63 -
44.00/5.0 59/80R63 -
44.00/6.0 55.5/80R57 -
47.00/6.0 60/80R57 -
52.00/6.0 - 65/65-57

86 OTHER SPECIFICATION 87
3.2 Valve Types Interchangeable Swivel Valves For Tubeless Or Tube Type Tires
TRJ4000-4 1/2 Large Bore Valves

Tubeless Type Spud Tube Type Spud

SP2 SP4000

28mm
Tube Valve
Tubeless Valve and 9.5mm
Rim Section Inner Liner

ø114mm
Tube Type Rubber Base Valves

TR218

B
Dimensions (mm)
Rim Valve A Valve No.
A B
9.5mm TR218A 20.6 11.1
TR220A 30.2 20.7
Tube Valve

ø63.5mm

PV-7 B

86˚

Tubeless Valve Dimensions (mm)

A Valve No.
A B C D dia.
PV-7 73 100 7 90

D dia.

88 OTHER SPECIFICATION 89
Tube Type Rubber Covered Valves

Dimensions (mm) TR13

JS75 Valve No.
A B F˚ E
B JS75 24 70 82˚
TR76A 24 86 86˚
TR77A 24 105 86˚
F˚± 2˚ 86˚
TR77E 35 94
TR78A 24 127 86˚
A TR175A 24 115 86˚
38mm
TR177A 24 95 86˚ Dimensions (mm)
JS177B 28 91 86˚ Valve No.
E
JS179 36 133 86˚ TR13 11.5
JS179A 29 137 86˚ TR15 16.5
TR179A 24 141 86˚
PV38 24 136 80˚
PV89 42.8 123 86˚ ø56mm
ø95mm V3-02-3 35.8 44.5 85˚
V3-02-15 23.3 145.5 86˚

Tube Type Screw-on Valves

PV88

B D
G˚
JSJ1175 90˚ F˚

B
F˚± 2˚ A
C
Large Bore Valves
A Dimensions (mm)
Valve No. Dimensions (mm)
A B D dia. F˚ Valve No.
A B C D F˚ G˚
JSJ1078S 30 121 32 84˚
V3-06-2 23.3 44.5 20.8 37.5 55˚ 55˚
JSJ1175 35 105 32 88˚
ø95mm V3-06-5 23.3 62.5 25.9 49.0 41˚ 41˚
JSJ1175B 35 105 32 80˚
PV88 26.3 80.5 47.0 54.5 30˚ 30˚
JSJ1175C 35 102 32 60˚
PV118 35.4 130.0 84.0 – 10˚ –

D dia.
TR150CW ø15.5mm

JS2

B
F˚

88.5mm
A Valves, TR150 and TR150CW, are also
Dimensions (mm) called Hand Bendable Valves, that is, their
Valve No.
A B F˚ stems are made of very flexible material
JS2 26 33 70˚ permitting manual bending in all directions
and to any angle.

ø57mm
90 OTHER SPECIFICATION 91
OTHER INFORMATION
1. Unit Conversion Tables
INFLATION PRESSURE WEIGHT (FROM POUND TO KILOGRAM) TEMPERATURE (CENTIGRADE/FAHRENHEIT)
2 2 2 2
kg/cm lb/in kPa bar kg/cm lb/in kPa bar lb kg lb kg lb kg lb kg °C °F °C °F °C °F °C °F °C °F °C °F
0.1 1 10 0.1 2.6 37 250 2.5 1 0.5 260 117.9 1200 544.3 5000 2268.0
-19 - 2.2 +11 +51.8 +41 +105.8 +71 +159.8 +101 +213.8 +131 +267.8
0.2 3 20 0.2 2.7 38 260 2.6 10 4.5 280 120.0 1300 589.7 5200 2358.7
18 0.4 12 53.6 42 107.6 72 161.6 102 215.6 132 269.6
0.3 4 30 0.3 2.8 40 270 2.7 20 9.1 300 136.1 1400 635.0 5400 2449.4
0.4 6 40 0.4 2.9 41 280 2.8 30 13.6 320 145.2 1500 680.4 5600 2540.2 17 +1.4 13 55.4 43 109.4 73 163.4 103 217.4 133 271.4
0.5 7 50 0.5 3.0 43 290 2.9 40 18.1 340 154.2 1600 725.8 5800 2630.9 16 3.2 14 57.2 44 111.2 74 165.2 104 219.2 134 273.2
0.6 9 60 0.6 3.1 44 300 3.0 50 22.7 360 163.3 1700 771.1 6000 2721.6 15 5.0 15 59.0 45 113.0 75 167.0 105 221.0 135 275.0
0.7 10 70 0.7 3.2 45 310 3.1 60 27.2 380 172.4 1800 816.5 7000 3175.2 14 6.8 16 60.8 46 114.8 76 168.8 106 222.8 136 276.8
0.8 11 80 0.8 3.3 47 320 3.2 70 31.8 400 181.4 1900 861.8 8000 3628.8
13 8.6 17 62.6 47 116.6 77 170.6 107 224.6 137 278.6
0.9 13 90 0.9 3.4 48 330 3.3 80 36.3 420 190.5 2000 907.2 9000 4082.4
1.0 14 100 1.0 3.5 50 340 3.4 90 40.8 440 199.6 2200 997.9 10000 4536.0 12 10.4 18 64.4 48 118.4 78 172.4 108 226.4 138 280.4
1.1 16 110 1.1 3.6 51 350 3.5 100 45.4 460 208.7 2400 1088.6 11000 4989.6 11 12.2 19 66.2 49 120.2 79 174.2 109 228.2 139 282.2
1.2 17 120 1.2 3.7 53 360 3.6 110 49.9 480 217.7 2600 1179.4 12000 5443.2 10 14.0 20 68.0 50 122.0 80 176.0 110 230.0 140 284.0
1.3 18 130 1.3 3.8 54 370 3.7 120 54.4 500 226.8 2800 1270.1 13000 5896.8 9 15.8 21 69.8 51 123.8 81 177.8 111 231.8 141 285.8
1.4 20 140 1.4 3.9 55 380 3.8 130 59.0 520 235.9 3000 1360.8 14000 6350.4
8 17.6 22 71.6 52 125.6 82 179.6 112 233.6 142 287.6
1.5 21 150 1.5 4.0 57 390 3.9 140 63.5 540 244.9 3200 1451.5 15000 6804.0
7 19.4 23 73.4 53 127.4 83 181.4 113 235.4 143 289.4
1.6 23 160 1.6 4.1 58 400 4.0 150 68.0 560 254.0 3400 1542.2 16000 7257.6
1.7 24 170 1.7 4.2 60 410 4.1 160 72.6 580 263.1 3600 1633.0 17000 7711.2 6 21.2 24 75.2 54 129.2 84 183.2 114 237.2 144 291.2
1.8 26 180 1.8 4.3 61 420 4.2 170 77.1 600 272.2 3800 1723.7 18000 8164.8 5 23.0 25 77.0 55 131.0 85 185.0 115 239.0 145 293.0
1.9 27 190 1.9 4.4 62 430 4.3 180 81.6 700 317.5 4000 1814.4 19000 8618.4 4 24.8 26 78.8 56 132.8 86 186.8 116 240.8 146 294.8
2.0 28 200 2.0 4.5 64 440 4.4 190 86.2 800 362.9 4200 1905.1 20000 9072.0 3 26.6 27 80.6 57 134.6 87 188.6 117 242.6 147 296.6
2.1 30 210 2.1 4.6 65 450 4.5 200 90.7 900 408.2 4400 1995.8
2 28.4 28 82.4 58 136.4 88 190.4 118 244.4 148 298.4
2.2 31 220 2.2 4.7 67 460 4.6 220 99.8 1000 453.6 4600 2086.6
2.3 33 230 2.3 4.8 68 470 4.7 240 108.9 1100 499.0 4800 2177.3 1 30.2 29 84.2 59 138.2 89 192.2 119 246.2 149 300.2
2.4 34 240 2.4 4.9 70 480 4.8 0 32.0 30 86.0 60 140.0 90 194.0 120 248.0 150 302.0
2.5 36 250 2.5 5.0 71 490 4.9 +1 33.8 31 87.8 61 141.8 91 195.8 121 249.8 160 320.0
2 35.6 32 89.6 62 143.6 92 197.6 122 251.6 170 338.0
3 37.4 33 91.4 63 145.4 93 199.4 123 253.4 180 356.0
WEIGHT (FROM KILOGRAM TO POUND) 4 39.2 34 93.2 64 147.2 94 201.2 124 255.2 190 374.0
kg/cm
2
lb/in
2
kPa bar kg/cm
2
lb/in
2
kPa bar kg lb kg lb kg lb kg lb 5 41.0 35 95.0 65 149.0 95 203.0 125 257.0 200 392.0
5.1 72 490 4.9 7.6 108 740 7.4 1 2.2 130 286.6 600 1322.8 2500 5511.5 6 42.8 36 96.8 66 150.8 96 204.8 126 258.8
5.2 74 500 5.0 7.7 109 750 7.5 5 11.0 140 308.6 650 1433.0 2600 5732.0 7 44.6 37 98.6 67 152.6 97 206.6 127 260.6
5.3 75 510 5.1 7.8 111 760 7.6 10 22.0 150 330.7 700 1543.2 2700 5952.4 8 46.4 38 100.4 68 154.4 98 208.4 128 262.4
5.4 77 520 5.2 7.9 112 770 7.7 15 33.1 160 352.7 750 1653.5 2800 6173.0
9 48.2 39 102.2 69 156.2 99 210.2 129 264.2
5.5 78 530 5.3 8.0 114 780 7.8 20 44.1 170 374.8 800 1763.7 2900 6393.3
10 50.0 40 104.0 70 158.0 100 212.0 130 266.0
5.6 80 540 5.4 8.1 115 790 7.9 25 55.1 180 396.8 850 1873.9 3000 6613.8
5.7 81 550 5.5 8.2 116 800 8.0 30 66.1 190 418.9 900 1984.1 3500 7716.1
5.8 82 560 5.6 8.3 118 810 8.1 35 77.2 200 440.9 950 2094.4 4000 8818.4
5.9 84 570 5.7 8.4 119 820 8.2 40 88.2 210 463.0 1000 2204.6 4500 9920.7 PRESSURE
6.0 85 580 5.8 8.5 121 830 8.3 45 99.2 220 485.0 1100 2425.1 5000 11023.0 kg/cm2 kPa bar psi
6.1 87 590 5.9 8.6 122 840 8.4 50 110.2 230 507.1 1200 2645.5 5500 12125.3
6.2 88 600 6.0 8.7 124 850 8.5 55 121.3 240 529.1 1300 2866.0 6000 13227.6
kg/cm2 1 98.07 0.9807 14.22
6.3 89 610 6.1 8.8 125 860 8.6 60 132.3 250 551.2 1400 3086.4 6500 14329.9 kPa 0.0102 1 0.01 0.1450
6.4 91 620 6.2 8.9 126 870 8.7 65 143.3 260 573.2 1500 3306.9 7000 15432.2 bar 1.020 100 1 14.503
6.5 92 630 6.3 9.0 128 880 8.8 70 154.3 270 595.2 1600 3527.4 7500 16534.5
psi 0.0703 6.895 0.06895 1
6.6 94 640 6.4 9.1 129 890 8.9 75 165.3 280 617.3 1700 3747.8 8000 17636.8
6.7 95 650 6.5 9.2 131 900 9.0 80 176.4 290 639.3 1800 3968.3 8500 18739.1
6.8 97 660 6.6 9.3 132 910 9.1 85 187.4 300 661.4 1900 4188.7 9000 19841.4
6.9 98 670 6.7 9.4 133 920 9.2 90 198.4 350 771.6 2000 4409.2 9500 20943.7
7.0 99 680 6.8 9.5 135 930 9.3 95 209.4 400 881.8 2100 4629.7 10000 22046.0
7.1 101 690 6.9 9.6 136 940 9.4 100 220.5 450 992.1 2200 4850.1
7.2 102 700 7.0 9.7 138 950 9.5 110 242.5 500 1102.3 2300 5070.6
7.3 104 710 7.1 9.8 139 960 9.6 120 264.6 550 1212.5 2400 5291.0
7.4 105 720 7.2 9.9 141 970 9.7
7.5 107 730 7.3 10.0 142 980 9.8

92 OTHER INFORMATION 93
2. Specific Weight (Approximately)
LENGTH
m.meter c.meter meter k.meter inch foot yard mile Material Pounds/cu.yd Metric Tons/m3 Material Pounds/cu.yd Metric Tons/m3
m.meter 1 0.10000 0.00100 - 0.03937 0.00328 0.00109 -
Anthracite 2000 1.2 Iron ore: Magnetite 4700 2.8
c.meter 10.0000 1 0.01000 0.00001 0.39371 0.03281 0.01094 -
Basalt 3400 2.0 Limestone 2500 1.5
meter 1000.00 100.00 1 0.00100 39.3707 3.28089 1.09363 0.00062
Bauxite 2400 1.4 Pyrites 4400 2.6
k.meter - 100000 1000.00 1 39370.7 3280.89 1093.63 0.62138
Clay: dry 2500 1.5 Over-Burden
inch 25.3995 2.53995 0.02540 0.00003 1 0.08333 0.02778 0.00002
wet 2900 1.7 75%rock-25%earth 3400 2.0
foot 304.794 30.4794 0.30479 0.00030 12.0000 1 0.33333 0.00019
Coal 1200 0.7 50%rock-50%earth 2900 1.7
yard 914.383 91.4383 0.91438 0.00091 36.0000 3.00000 1 0.00057
Copper ore 2700 1.6 25%rock-75%earth 2700 1.6
mile - 160931 1609.31 1.60931 63360.0 5280.00 1760.00 1
Crushed gypsum 2700 1.6 Sand: dry 2400 1.4
Earth: dry 2500 1.5 wet 3000 1.8
wet 2700 1.6 Sandstone 2500 1.5
AREA Granite 2900 1.7 Snow: dry 170 0.1
meter2 are hectare k.meter2 foot2 yard2 acre mile2 Gravel: dry 2900 1.7 wet 840 0.5
2
meter 1 0.010000 0.000100 0.000001 10.7639 1.19600 0.000247 0.000000 wet 3400 2.0 Uranium 2700 1.6
are 100.000 1 0.010000 0.000100 1076.39 119.600 0.024710 0.000039 Note: Weight of materials varies with moisture content, grain size, degree of compaction, etc. Test must be made to know
hectare 10000.0 100.000 1 0.010000 107639.0 11960.0 2.47105 0.003861 exact weight.
k.meter2 - 10000.0 100.000 1 - - 247.105 0.386098
foot2 0.092903 0.000929 0.000009 0.000000 1 0.111111 0.000023 0.000000
yard2 0.836130 0.008361 0.000084 0.000000 9.00000 1 0.000207 0.00000
acre 4046.87 40.4687 0.404687 0.004047 43560.2 4840.00 1 0.001562
mile2 - 25900.2 259.002 2.59002 - - 640.000 1

WEIGHT
gram k.gram ton s.ton l.ton ounce pound
gram 1 0.00100 - - - 0.03527 0.00220
k.gram 1000.00 1 0.00100 0.00110 0.00098 35.2739 2.20462
ton - 1000.00 1 1.10230 0.98421 35273.9 2204.62
s.ton 907185 907.185 0.90719 1 0.89286 32000.0 2000.00
l.ton - 1016.04 1.01604 1.12000 1 35840.0 2240.00
ounce 28.3495 0.02835 0.00003 0.00003 0.00003 1 0.06250
pound 453.592 0.45359 0.00045 0.00050 0.00045 16.0000 1

CAPACITY
cub.meter liter cub.inch cub.foot cub.yard U.S.gallon U.K.gallon
cub.meter 1 1000.00 61027.1 35.3147 1.30802 264.186 220.216
liter 0.00100 1 61.0271 0.03532 0.00131 0.26419 0.22022
cub.inch 0.00002 0.01639 1 0.00058 0.00002 0.00433 0.00361
cub.foot 0.02832 28.3167 1728.00 1 0.03704 7.48051 6.23549
cub.yard 0.76455 764.554 46656.0 27.0000 1 201.974 168.358
U.S.gallon 0.00379 3.78543 231.000 0.13368 0.00495 1 0.83270
U.K.gallon 0.00455 4.54596 277.413 0.16037 0.00594 1.20091 1

FORCE
1 kgf = 9.81 N

POWER (horse power)

1 hp = 550 ft * lbf/s = 745.7 W
1 PS = 75 m * kgf/s = 735.5 W

94 OTHER INFORMATION 95
MEMO

Off-The-Road Tire Guide
No ratings yet
Off-The-Road Tire Guide
54 pages
Data Book 2013
No ratings yet
Data Book 2013
53 pages
BS Databook 2013
No ratings yet
BS Databook 2013
53 pages
Bridgestone OTR Databook 2018 09 06 2018
No ratings yet
Bridgestone OTR Databook 2018 09 06 2018
53 pages
Bridgestone OTR Databook July 2016
100% (1)
Bridgestone OTR Databook July 2016
102 pages
(Final) Bridgestone Data Book 2023
No ratings yet
(Final) Bridgestone Data Book 2023
56 pages
Bridgestone Data Book 2024
No ratings yet
Bridgestone Data Book 2024
63 pages
Brochure Pattern 001
No ratings yet
Brochure Pattern 001
21 pages
Bridgestone Pattern Digest PDF
No ratings yet
Bridgestone Pattern Digest PDF
21 pages
Bridgestone OTR Technical Data Book
75% (4)
Bridgestone OTR Technical Data Book
89 pages
Bridgestone OTR
No ratings yet
Bridgestone OTR
89 pages
BS Databook2002
No ratings yet
BS Databook2002
93 pages
Bridgestone - 2005 - InfoTech
No ratings yet
Bridgestone - 2005 - InfoTech
39 pages
Pattern Digest: Off-The-Road Tires
No ratings yet
Pattern Digest: Off-The-Road Tires
21 pages
Maintenance Manual - en
No ratings yet
Maintenance Manual - en
54 pages
Off-The-Road Tire Seminar Guide
No ratings yet
Off-The-Road Tire Seminar Guide
27 pages
Bridgestone OTR Product Guide 03-07-2016 PDF
No ratings yet
Bridgestone OTR Product Guide 03-07-2016 PDF
80 pages
2022 TITAN - OTR Tires
No ratings yet
2022 TITAN - OTR Tires
170 pages
Vol 11 OTR Tires Databook 01032024 LOWRES
No ratings yet
Vol 11 OTR Tires Databook 01032024 LOWRES
168 pages
Bridgestone Data Book
100% (1)
Bridgestone Data Book
152 pages
Technical Manual
100% (1)
Technical Manual
26 pages
The Premium Industrial Tyre Range
No ratings yet
The Premium Industrial Tyre Range
6 pages
Off-Road Tire Nomenclature Guide
No ratings yet
Off-Road Tire Nomenclature Guide
50 pages
Tires-Section 21
No ratings yet
Tires-Section 21
38 pages
Ascenso International Catalogue OTR
No ratings yet
Ascenso International Catalogue OTR
68 pages
Basis Information of Tyre
100% (2)
Basis Information of Tyre
32 pages
Sec21 Sebd0350
No ratings yet
Sec21 Sebd0350
42 pages
Pirelli TBR - 2010
No ratings yet
Pirelli TBR - 2010
40 pages
Brochure-Magna 2019-USA
No ratings yet
Brochure-Magna 2019-USA
68 pages
Triangle OTR Product-Guide
No ratings yet
Triangle OTR Product-Guide
32 pages
2018 Otr Global Product Catalog PDF
No ratings yet
2018 Otr Global Product Catalog PDF
120 pages
OTR Tire Retreading Guide
No ratings yet
OTR Tire Retreading Guide
98 pages
Specialty Tires for Heavy Machinery
100% (1)
Specialty Tires for Heavy Machinery
2 pages
OTR & Industrial Tire Guide
No ratings yet
OTR & Industrial Tire Guide
17 pages
Dealer:: Tires For Rigid Dumpers
No ratings yet
Dealer:: Tires For Rigid Dumpers
7 pages
PCR Technical Guide
No ratings yet
PCR Technical Guide
26 pages
Triangle OTR Pocket-Guide
No ratings yet
Triangle OTR Pocket-Guide
48 pages
Caterpillar Off-Road Tyres Guide
100% (2)
Caterpillar Off-Road Tyres Guide
9 pages
Bridgestone Tyre-2
No ratings yet
Bridgestone Tyre-2
18 pages
SEHS0346-00 Bridgestone Maintenance Manual
No ratings yet
SEHS0346-00 Bridgestone Maintenance Manual
27 pages
Eurotire
No ratings yet
Eurotire
4 pages
Hankook Pattern Digest 2013-2014 (Iso 29mb)
No ratings yet
Hankook Pattern Digest 2013-2014 (Iso 29mb)
187 pages
2024LINGLONG TechnicalDataSpecialtyTires
No ratings yet
2024LINGLONG TechnicalDataSpecialtyTires
122 pages
Specialty Tire Catalog 2024
No ratings yet
Specialty Tire Catalog 2024
62 pages
International Catalogue Non Agri Segment
No ratings yet
International Catalogue Non Agri Segment
85 pages
Unit 5
No ratings yet
Unit 5
50 pages
OTR Tire Guide for Industry Pros
No ratings yet
OTR Tire Guide for Industry Pros
32 pages
Comprehensive Guide to Tyres
No ratings yet
Comprehensive Guide to Tyres
34 pages
Truck & Bus Tire Guide
No ratings yet
Truck & Bus Tire Guide
19 pages
Continental Technical Databook 2007-2008
100% (3)
Continental Technical Databook 2007-2008
121 pages
Tread Cuts: Damage Code No
No ratings yet
Tread Cuts: Damage Code No
33 pages
Warranty Claim Procedure Manual
No ratings yet
Warranty Claim Procedure Manual
28 pages
Good Year Off The Road TIREdatabook2011
No ratings yet
Good Year Off The Road TIREdatabook2011
167 pages
Bridgestone Repair System Reparacion Australia
No ratings yet
Bridgestone Repair System Reparacion Australia
4 pages
Earthmoving Tyre Safety - LC Tyres
No ratings yet
Earthmoving Tyre Safety - LC Tyres
64 pages
Convergencia 793C
No ratings yet
Convergencia 793C
4 pages
Catalogo Aros y Ruedas
0% (1)
Catalogo Aros y Ruedas
80 pages
Truck Tire Service Manual 2011
100% (1)
Truck Tire Service Manual 2011
154 pages
Tire Maintenance, Safety and Warranty Manual: Associated Brands
No ratings yet
Tire Maintenance, Safety and Warranty Manual: Associated Brands
48 pages
Business Proposal Black Soldier Fly (BSF) Farming
100% (4)
Business Proposal Black Soldier Fly (BSF) Farming
6 pages
Hepatitis Overview for Medical Students
No ratings yet
Hepatitis Overview for Medical Students
21 pages
Water Level Indicator Project Paper
0% (1)
Water Level Indicator Project Paper
4 pages
Waltonchain White Paper 2.0 - EN
No ratings yet
Waltonchain White Paper 2.0 - EN
72 pages
School Supply Vending Machine Design
No ratings yet
School Supply Vending Machine Design
26 pages
Krispy Kreme Case Report
No ratings yet
Krispy Kreme Case Report
9 pages
Bamboo: Eco-Friendly Growth & Trade
No ratings yet
Bamboo: Eco-Friendly Growth & Trade
10 pages
Chapter 3 (Investment Mpaterials) : Multiple Choice Questions
100% (1)
Chapter 3 (Investment Mpaterials) : Multiple Choice Questions
12 pages
Work at Height Manager Course Singapore
100% (2)
Work at Height Manager Course Singapore
7 pages
VIMA 2.0 Model Constitution
No ratings yet
VIMA 2.0 Model Constitution
54 pages
Conclusion in Literature Review
100% (2)
Conclusion in Literature Review
8 pages
Levels of Thinking
No ratings yet
Levels of Thinking
3 pages
Project On Music
No ratings yet
Project On Music
14 pages
Online Advertising by Using Different Ways in SEM: Submissions For SEM (Sec - 1)
No ratings yet
Online Advertising by Using Different Ways in SEM: Submissions For SEM (Sec - 1)
12 pages
J-00383605-uPVC Gray Pipe DIN at 23°C Temperature (3P-PIPE) 2021
No ratings yet
J-00383605-uPVC Gray Pipe DIN at 23°C Temperature (3P-PIPE) 2021
7 pages
Exploratory Project Report Format 2024-28 Batch
No ratings yet
Exploratory Project Report Format 2024-28 Batch
57 pages
Kendall'S Tau - B: Hasil Uji Statistik
No ratings yet
Kendall'S Tau - B: Hasil Uji Statistik
4 pages
PIIS2666334122000459
No ratings yet
PIIS2666334122000459
4 pages
Strikes and Lockouts Cases
No ratings yet
Strikes and Lockouts Cases
40 pages
Isds361b Notes
No ratings yet
Isds361b Notes
103 pages
Engineering Heads Design Guide
No ratings yet
Engineering Heads Design Guide
14 pages
FABM FS and Closing Entries
100% (1)
FABM FS and Closing Entries
18 pages
Postgraduate PG Mba Semester 3 2023 November Advanced Financial Management Pattern 2019
No ratings yet
Postgraduate PG Mba Semester 3 2023 November Advanced Financial Management Pattern 2019
4 pages
Blood Pressure by DR Manal M Kamal
No ratings yet
Blood Pressure by DR Manal M Kamal
28 pages
Beepedia Daily Current Affairs (Beepedia) 14th June 2025
No ratings yet
Beepedia Daily Current Affairs (Beepedia) 14th June 2025
8 pages
Bohra 2014
No ratings yet
Bohra 2014
7 pages
Components of The Greenhouse System For Environmental Control
No ratings yet
Components of The Greenhouse System For Environmental Control
14 pages
Voice Assistant Project Report
No ratings yet
Voice Assistant Project Report
30 pages
Physics JAMB Dimensions and Units 100Q
No ratings yet
Physics JAMB Dimensions and Units 100Q
26 pages
Digital Controller
No ratings yet
Digital Controller
19 pages

Databook 2011

Uploaded by

Databook 2011

Uploaded by

GENERAL INFORMATION

O-RING, FLAP, RIM, VALVE, CONVERSION TABLES

©2011 Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan

4. Remarks............................................................................................................... 82 Mobile Crane Service

Overall Width (OW)

Breaker Rim Width

Overall Nominal Rim

2 Bridgestone’s Specifications Code E A R T H M OV I N G L OA D E R

5 2 5 Tire Size, Star Rating,Tubeless or Tube Type AND

Tire Structures Classified by Type of Service and Bridgestone’s

LI kg LI kg LI kg LI kg LI kg LI kg Speed Symbol Speed (km/h) Speed Symbol Speed (km/h)

10 60 60 250 110 1 060 160 4 500 210 19 000 260 80 000

4.7 Dual Specification Codes

26.5R25 MS* VLT T DE2

Loader & Dozer Service 17.5 – 25 12 FG T DG2

Earthmover Service 17.5R25 1 VKT T EG2

V-STEEL V-STEEL V-STEEL

Strength of tire casing is designed to constrain inflation pressure used.

Description on Tire Sidewall

V-STEEL Wide Base Regular V-STEEL

V-STEEL Wide Base Regular V-STEEL 14.00R24~ 21.00R33~ V-STEEL V-STEEL

L317 V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL V-STEEL

V-STEEL V-STEEL V-STEEL SMOOTH V-STEEL V-STEEL V-STEEL V-STEEL

VSW VMTP VLTS

VUT(E2) VHS(E2) VEL(E3) VSNT(E4) VZTP(E4) VREP(E4)

VUT(G2) VUT(L2) VMT(L3) VSDT(L5)

« VSW is especially designed for snow surface operations.

Size Type Size Type Size Type

« VSW is especially designed for snow surface operations. VSJ(E7)

VCH 3 Industrial IDU - - VCH IDU

VMTS 3 E4 E2A 91 62 1400 386 642 428 38.0 450 10.00W

VSW 3 G2 - - - 1351 390 594 446 23.5 - 10.00VA VKT Loader  1

VRLS 2 Industrial IDU - -

445/95R25 VHB 177E Mobile Crane - - - VHB High-

VSW 177E Mobile Crane - - -

VELS 2 E4 E2A 144 99 1638 515 744 580 50.0 587

VCHS 214A5 3 Industrial IDU - -

kPa 125 150 175 200 225 250 275 300

VMT 1 L3 D2A - - 1480 530 652 597 33.0 -

750/65R25 (30/65R25) 650/65R25 600/65R25 550/65R25 25/65R25

VSDL 2 L5 D2A - - 1790 684 797 761 95.5 -

VSMS 2 L5S D2A - - 1775 684 810 746 95.0 -

VSNT MS E4 DE2 220 151 1905 768 849 835 60.0 -

VSDL 2 L5 D2A - - 1925 766 855 846 104.0 -

VSMS 2 L5S D2A - - 2008 766 904 861 104.5 -

3 Industrial - - - VCHS IDU

VCHS 219A5 3 Industrial IDU - -

® Sand Service ® Grader Service ® Compactor Service ® Logging Service

® Loader & Dozer Service ® Industrial Service

WL(E3) RLS(E4) RG(G1)

T/T: Tube Type T/T: Tube Type

GL(L2) FGF(L2) VL2(L3) NL(L4) STMS(L5S)

®Sand Service YS2

T/T: Tube Type T/T: Tube Type

17.5/65-20 42x17-20 15.5/70-20

RL 12 L3 D2A - - 1355 387 614 410 28.0 450 10.00VA FG Loader PR 12 14

14.00-24 TG FG 12 G2 G2A - - 1336 375 606 400 31.0 - 8.00TG

16 395 430 10.00VA

12 L2 D2A 1330 390 TBA TBA 10.00VA

16.00-24 TG FG 16 G2 G2A - - 1453 438 638 500 32.5 - 10.00VA FG Grader PR 16

16.00-25 RL 28 Industrial IDU - -

21.00-25 RL 40 Industrial IDU - - RL IDU

23.5-25 VL2 16 L3 D2A - - 1607 618 682 688 43.0 -

STMS 32 L5S D2A - - 1798 680 827 719 95.0 -

26.5-25 VL2 20 L3 D2A - - 1738 683 745 734 44.0 -

35/65-33 NL 24 L4 D2V - - 2085 890 953 928 62.5 - 28.00/3.5 NL Loader PR 24 30 42

16.00-25 RL 28 Industrial 1478 445 671 459 33.5 513

Off-the-Road Tires Used for Industrial Vehicle Applications

TRA Code Approximate Inflated Dimensions Minimum Recommended

For Bias Tires

Tube Valve and B Dimensions (mm)

Tubeless Type Spud Tube Type Spud

Tubeless Valve Dimensions (mm)

Dimensions (mm) TR13

Tube Type Screw-on Valves

POWER (horse power)

VCH 3 Industrial IDU - - VCH IDU

VMTS 3 E4 E2A 91 62 1400 386 642 428 38.0 450 10.00W

VSW 3 G2 - - - 1351 390 594 446 23.5 - 10.00VA VKT Loader 1

VRLS 2 Industrial IDU - -

VELS 2 E4 E2A 144 99 1638 515 744 580 50.0 587

VCHS 214A5 3 Industrial IDU - -

VMT 1 L3 D2A - - 1480 530 652 597 33.0 -

VSDL 2 L5 D2A - - 1790 684 797 761 95.5 -

VSMS 2 L5S D2A - - 1775 684 810 746 95.0 -

VSDL 2 L5 D2A - - 1925 766 855 846 104.0 -

VSMS 2 L5S D2A - - 2008 766 904 861 104.5 -

3 Industrial - - - VCHS IDU

VCHS 219A5 3 Industrial IDU - -