इंडियन ऑयल कॉर्पोरे शन लललिटे ि

इंडियन ऑयल भवन, 2, गररयाहाट रोि(दक्षिण)

कोलकाता – 700 068
Indian Oil Corporation Limited
Indian oil Bhavan, 2, Gariahat Road (South)
Kolkata -700 068

Phone: Office : EPABX : 2414-5555

ववर्पणन प्रभाग, र्पव

ू ी िेत्र http : www. iocl. com 2414-
5350
(Marketing Division) Eastern Region ---------------------------------------------------------------------------------------------

Detailed item-wise Finalised Rates

INDIAN OIL CORPORATION LIMITED
Tender No : RCC/ERO/37/2017-18/PT-18
E-Tender ID: 2017_ERO_53480_1

Name of Work: Rate Contract (Category I : For Works upto 2 Lakh) for Eastern Regional Office for Upgradation /
Renovation/ Maintenance & Repair/Petty Jobs of Corporation owned Flats, Guest Houses, Transit Accommodations
and office buildings in Kolkata
Note:- The below mentioned rates are inclusive of all taxes, levies & duties but exclusive of GST which shall be
payable at applicable rate as extra
Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
SOR Items
Providing and laying cement concrete in walls (any
thickness) including attached pilasters, columns,
piers, abutments, pillars, sunken floor,parapets,
1.01 coping, bed blocks, anchor blocks, plain window
sills, fillets,posts, struts, buttresses, string or
lacing courses excluding the cost of centering,
shuttering and finishing.
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone
1.02 1.00 M3 6622.06 5556.57
aggregate 20 mm nominal size)
1:3:6 (1 cement : 3 coarse sand : 6 graded stone
1.03 1.00 M3 5972.48 5011.51
aggregate 20 mm nominal size)
Brick work with locally available good quality burnt
clay F.P.S. (non modular) bricks of class designation
1.04
7.5 in superstructure above plinth level in all
shapes & sizes in:
1.05 Cement mortar 1:4 (1 cement : 4 coarse sand) 1.00 M3 5818.94 4882.67
Half brick masonry with locally available good
quality burnt clay F.P.S. (non modular) bricks of
1.06
class designation 7.5 in superstructure above plinth
level up to floor V level
1.07 Cement mortar 1:3 (1 cement :3 coarse sand) 1.00 M2 711.36 596.90
Providing and fixing precast cement concrete solid
block, including hoisting and setting in position
1.08
with cement mortar 1:3 (1cement : 3 coarse sand),
cost of required centering, shuttering complete:
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
1.09 1.00 M3 9583.77 8041.74
aggregate 20 mm nominal size)
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing precast cement concrete
hollow block, including hoisting and setting in
1.10 position with cement mortar 1:3 (1 cement : 3
coarse sand), cost of required centering, shuttering
complete:
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
1.11 1.00 M3 7318.88 6141.27
aggregate 20 mm nominal size)
Providing and fixing 18 mm thick gang saw cut,
mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity counters,
window sills , facias and similar locations of
required size, approved shade, colour and texture
1.12 laid over 20 mm thick base cement mortar 1:4 (1
cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc.
complete at all levels.
Raj Nagar Plain white marble/ Udaipur green
1.13
marble/ Zebra black marble
Area of slab upto 0.50 sqm : Base Rate = Rs. 805/-
1.14 1.00 M2 2403.89 2017.10
per sqm.
Area of slab over 0.50 sqm : Base Rate = Rs. 898/-
1.15 1.00 M2 2529.26 2122.31
per sqm.
1.16 Granite of any colour and shade
Area of slab upto 0.50 sqm : Base Rate = Rs. 2046/-
1.17 1.00 M2 3969.24 3330.59
per sqm.
Area of slab over 0.50 sqm : Base Rate = Rs. 2165/-
1.18 1.00 M2 4011.03 3365.65
per sqm.
Providing edge moulding to 18 mm thick marble
stone counters, Vanities etc., including machine
1.19 polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-
Charge.
1.20 Marble Work 1.00 M 139.91 117.40
1.21 Granite Work 1.00 M 237.12 198.97
Extra for providing opening of required size &
shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in
1.22 marble/Granite/stone work, including necessary 1.00 EA 397.01 333.13
holes for pillar taps
etc. including moulding, rubbing and polishing of
cut edges etc. complete.
Marble stone flooring with 18 mm thick marble
stone, as per sample of marble approved by
Engineer-in-charge, over 20 mm (average) thick
1.23
base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement slurry,
including rubbing and polishing complete.
1.24 Udaipur green marble 1.00 M2 1805.19 1514.73
1.25 Black Zebra or Kadappa (30mm Thk.) 1.00 M2 1392.73 1168.64
1.26 Agaria White 1.00 M2 2215.83 1859.30
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Extra for marble stone flooring in treads of steps
1.27 1.00 M2 328.88 275.96
and risers using single length up to 2.00 metre .
Extra for pre finished nosing to treads of steps of
1.28 1.00 M 118.11 99.10
marble stone.
1.29 Kota Stone work
Providing and fixing 25mm Thk. Kota stone slab
flooring over 20 mm (average) thick base laid over
andjointed with grey cement slurry mixed with
1.30 1.00 M2 1135.63 952.90
pigment to match the shadeof the slab, including
rubbing and polishing complete with base of
cementmortar 1 : 4 (1 cement : 4 coarse sand)

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado andpillars laid on 12 mm (average)
thick cement mortar 1:3 (1 cement: 3coarse sand)
1.31 1.00 M2 717.72 602.23
and jointed with grey cement slurry mixed with
pigment to match the shade of the slabs, including
rubbing and polishing complete.

Extra for Kota stone/Sand stone for treads & risers

1.32 1.00 M2 17.26 14.48
in steps using single length up to 1.05 metre
Extra for pre finished nosing to treads of steps of
1.33 1.00 M 79.04 66.32
Kota stone.
Deduct for not using 20 mm thick cement mortar
1.34 1:4 (1 cement : 4 coarse sand) bedding in laying of 1.00 M2 1135.63 952.90
floor tiles.
Fixing glazed/ Ceramic/ Vitrified floor tiles with
cement based high polymer modified quick-set tile
1.35 1.00 M2 444.26 372.78
adhesive (Water based) conforming to IS:15477, in
average 3mm thickness.

Chequered precast cement concrete tiles 22 mm

thick in footpath & courtyard, jointed with neat
cement slurry mixed with pigment to match the
1.36
shade of the tiles,including rubbing and polishing
complete, on 20 mm thick bed of cement mortar
1:4 ( 1 cement : 4 coarse sand):
Medium shade pigment using 50% white cement and
1.37 1.00 M2 1135.63 952.90
50% Grey cement
1.38 Ordinary cement without any pigment 1.00 M2 714.08 599.19
Providing and laying 60mm thick factory made
cement concrete interlocking paver block of M-30
grade made by block making machine with strong
vibratory compaction,of approved size, design &
1.39 shape, laid in required colour and pattern over and 1.00 M2 717.72 602.23
including 50mm thick compacted bed of coarse
sand, filling the joints with fine sand etc. all
complete as per the direction of Engineer-in-
charge.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and laying 80mm thick factory made
cement concrete interlocking paver block of M-40
grade made by block making machine with strong
vibratory compaction,of approved size, design &
1.40 shape, laid in required colour and pattern over and 1.00 M2 902.14 756.99
including 50mm thick compacted bed of coarse
sand, filling the joints with fine sand etc. all
complete as per the direction of Engineer-in-
charge.
Taking out existing CC interlocking paver blocks
from footpath/ central verge, including removal of
mortar etc.,disposal of unserviceable material to
1.41 the dumping ground, for which payment shall be 1.00 M2 49.06 41.17
made separately and stacking of serviceable
material within 50 metre lead as per direction of
Engineer-in-charge.
Laying old cement concrete interlocking paver
blocks of any design/ shape laid in required line
level, curvature,colour and pattern over and
including 50 mm thick compacted bed of coarse
1.42 1.00 M2 200.78 168.47
sand, filling the joints with fine sand etc. all
complete as per the direction of Engineer-in-
charge. ( Old CC paver blocks shall be supplied by
the department free of cost).
Providing and fixing precoated galvanised iron
profile sheets ( size, shape and pitch of corrugation
as approved by Engineer- in charge) 0.50 mm (
+0.05 % ) total coated thickness with zinc coating
120 grams per sqm as per IS : 277 , in 240 mpa steel
grade, 5-7 microns epoxy primer on both side of
the sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
1.43 microns minimum to avoid scratches during 1.00 M2 844.91 708.96
transportation and should be supplied in single
length upto 12 metre or as desired by Engineer- in
charge. The sheet shall be fixed using self drilling /
self tapping screws of size ( 5.5x 55 mm ) with
EPDM seal, complete upto any pitch in horizontal /
vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to
size and shape wherever required.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing false ceiling at all height
including providing and fixing of frame work made
of special sections, power pressed from M.S. sheets
and galvanized with zinc coating of 120 gms/sqm
(both side inclusive) as per IS : 277 and consisting
of angle cleats of size 25 mm wide x 1.6 mm thick
with flanges of 27 mm and 37mm, at 1200 mm
centre to centre, one flange fixed to the ceiling
with dash fastener 12.5 mm dia x 50mm long with
6mm dia bolts, other flange of cleat fixed to the
angle hangers of 25x10x0.50 mm of required length
1.44 with nuts & bolts of required size and other end of
angle hanger fixed with intermediate G.I. channels
45x15x0.9 mm running at the spacing of 1200 mm
centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5 mm, at
450 mm centre to centre, shall be fixed in a
direction perpendicular to G.I. intermediate
channel with connecting clips made out of 2.64 mm
dia x 230mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick
27 mm high having flanges of 20 mm and 30 mm
long, the thick
12.5 mm perimeter of ceiling
tapered fixed tofire resistant
edge gypsum
1.45 1.00 M2 1050.23 881.24
board conforming to IS: 2095- Part I
Providing CEMENT PLASTER to walls and ceilings
1.46 using fine sand including curing etc. complete up to
10 meter height.
1.47 In Single Coat
12 mm cement plaster of mix 1:4 (1 cement: 4 fine
1.48 1.00 M2 167.16 140.27
sand)
6 mm cement plaster of mix 1:3 (1 cement : 3 fine
1.49 1.00 M2 145.36 121.97
sand)
1.50 In Two Coats
18 mm cement plaster in two coats under layer 12
mm thick cement plaster 1:5 (1 cement: 5 coarse
1.51 sand) and a top layer 6 mm thick cement plaster 1.00 M2 266.19 223.36
1:3 (1 cement : 3 coarse sand) finished rough with
sponge.
Repairs to plaster of thickness 12 mm to 20 mm in
patches of area 2.5 sq. metres and under, including
cutting the patch in proper shape, raking out joints
1.52
and preparing and plastering the surface of the
walls complete, including disposal of rubbish to
unobjectionable area outside the premises:

1.53 With cement mortar 1:4 ( 1 cement : 4 fine sand) 1.00 M2 254.38 213.45

Providing and applying plaster of paris putty of 2

1.54 mm thickness over plastered surface to prepare the 1.00 M2 113.56 95.29
surface even and smooth complete.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and applying in position at all levels &
heights 12mm thick average POP punning to wall in
layer as per design in proper line & level and at
right angle to the room wall including providing U-
Grooves 6x6mm in POP at skirting & beam level and
1.55 1.00 M2 272.55 228.70
around frames for doors & window lining etc.
complete and as directed. The cost shall also
include scrapping of paint, neeru etc. from wall
surface using chisel hammer & wire brush and
make the surface rough to receive POP paste.
Dismantling steel work in single sections including
dismembering and disposing off unserviceable
1.56 1.00 KG 0.91 0.76
material to an unobjectionable place as directed by
Engineer-in-charge.
Dismantling steel work in built up sections in
angles, tees, flats and channels including all gusset
plates, bolts, nuts, cutting rivets, welding etc.
1.57 1.00 KG 2.27 1.91
including disposing off unserviceable material to an
unobjectionable place as directed by Engineer-in-
charge..
Dismantling old plaster or skirting raking out joints
and cleaning the surface for plaster including
1.58 disposal of unserviceable material to an 1.00 M2 20.90 17.53
unobjectionable place as directed by Engineer-in-
charge.
Dismantling aluminium/ Gypsum partitions, doors,
windows, fixed glazing and false ceiling including
1.59 disposal of unserviceable material to an 1.00 M2 22.71 19.06
unobjectionable place as directed by Engineer-in-
charge.
Demolishing R.C.C. work manually/ by mechanical
means including disposal of unserviceable material
1.60 1.00 M3 1336.40 1121.38
to an unobjectionable place as directed by
Engineer-in-charge.
Demolishing C.C. /R.C.C. work by mechanical
means and stockpiling at designated locations and
disposal of dismantled materials up to a lead of
1.61 1.00 M3 1411.81 1184.65
1000m, stacking serviceable and unserviceable
material separately including cutting
reinforcement bars.
Demolishing Plain concrete work manually/ by
mechanical means including disposal of
1.62 1.00 M3 817.65 686.09
unserviceable material to an unobjectionable place
as directed by Engineer-in-charge.
Demolishing brick work manually/ by mechanical
means including disposing off unserviceable
1.63 1.00 M3 774.04 649.50
material to an unobjectionable place as directed by
Engineer-in-charge.
Dismantling doors, windows and clerestory windows
(steel or wood) shutter including chowkhats,
1.64 architrave, holdfasts etc. complete and disposing
off unserviceable material to an unobjectionable
place as directed by Engineer-in-charge.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
1.65 Of area 3 sq. metres and below 1.00 EA 144.45 121.21
1.66 Of area beyond 3 sq. metres 1.00 EA 198.96 166.95
Dismantling tile work in floors, roofs and walls laid
in cement mortar including disposing off
1.67 1.00 M2 31.80 26.68
unserviceable material to an unobjectionable place
as directed by Engineer-in-charge.
Removing existing wardrobe/kitchen cabinet with
1.68 proper care and stacking within premises as 1.00 M2 69.05 57.94
directed by Engineer-In-Charge
Removing existing commode and disposing off the
1.69 material to an unobnectionable place as directed 1.00 EA 375.21 314.84
by Engineer-In-Charge
Dismantiling wash basin and disposing off the
1.70 material to an unobnectionable place as directed 1.00 EA 354.32 297.31
by Engineer-In-Charge
Dismantling G.I. pipes including cutting walls,
excavtion and refilling trenches, redoing the walls
1.71 after taking out the pipes,manually/ by mechanical
means including stacking of pipes within 50 metres
lead as per direction of Engineer-in-charge:
1.72 15 mm to 40 mm nominal bore 1.00 M 59.96 50.31
Removing existing Electrical fittings such as Ceiling
Fans, Exhaust Fans, Geysers etc including disposing
1.73 1.00 EA 125.37 105.20
off unserviceable material to unobjectionable
place as directed by Engineer-in-charge.

Dismantling of loose cement mortar bedding/ Sand

bedding laid below the old Flooring tiles including
1.74 1.00 M2 113.56 95.29
disposing off the same to an unobjectionable place
outside the Flat as directed by Engineer-In-Charge.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and laying integral cement based water
proofing treatment including preparation of surface
as required for treatment of roofs, balconies,
terraces etc consisting of following operations: a)
Applying a slurry coat of neat cement using 2.75
kg/sqm of cement admixed with water proofing
compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including
adjoining walls upto 300 mm height including
cleaning the surface before treatment. b) Laying
brick bats with mortar using broken bricks/brick
bats 25 mm to 115 mm size with 50% of cement
1.75 mortar 1:5 (1 cement : 5 coarse sand) admixed with 1.00 M2 1045.68 877.43
water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge over 20 mm
thick layer of cement mortar of mix 1:5 (1cement
:5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height
including rounding of junctions of walls and slabs c)
After two days of proper curing applying a second
coat of cement slurry using 2.75 kg/ sqm of cement
admixed with water proofing compound conforming
to IS:2645 and approved by Engineer-in-charge. d)
Providing and laying water proofing treatment in
sunken portion of WCs, bathroom etc., by applying
cement slurry mixed with water proofing cement
compound consisting of applying : a) First layer of
slurry of cement @ 0.488 kg /sqm mixed with water
proofing cement compound @ 0.253 kg / sqm. This
layer will be allowed to air cure for 4 hours. b)
1.76 Second layer of slurry of cement @ 0.242 kg/ sqm 1.00 M2 290.72 243.94
mixed with water proofing cement compound @
0.126 kg/ sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48
hours. The rate includes preparation of surface,
treatment and sealing of all joints, corners,
junctions of pipes and masonry with polymer mixed
slurry.

Providing and applying reinforcement treatment

comprising of following operation: Cleaning
reinforcement by wire brushing emery paper,
1.77 appling cleaning of reinforcement, applyning rust 1.00 M2 1998.70 1677.11
cleaning, rust prime/ructicideas in ratio as
specified in the speification or instructed by
Engineer-In-Charge
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Chemical Plaster/ Polymer Plaster: Hand mixed
polymer modified mortor/concrete - p/a handmix
polymer mortor/concrete of approved
manufacturer to bocken part of RCC member upto
30mm thk., clean the brocken concrete surface
with wire brush & was with water. Applying bond of
polymer & cement 1:1(by volume) to brocken
1.78 concrete surface. Applying bonding coat 1.00 M2 1658.01 1391.24
immediately apply ready mix polymer modified
mortor as approved manufacturers instruction in
layer of thickness not exceeding 15mm (applyin
bond at every later) upto profile of concrete in the
vicinity. Insert 10mm down graded qurats
aggregates in first layer (if required) curing,
scaffolding, cleaning etc. complete.

Providing & fixing MS Grills of approved pattern on

windows etc with MS Flats, square rods, Angles etc
1.79 complete in all respects including applying a 1.00 KG 111.75 93.77
priming coat of approved steel primer as per
instructions of Site In-Charge.

Refixing of IOCL supplied MS grill including

1.80 repairing of the same if required and other allied 1.00 KG 49.97 41.93
work as per direction of Engineer-In-Charge

Providing and applying two or more coats of

machine polishing to existing mosaic/marble/kota
1.81 1.00 M2 227.13 190.58
tiles inside flats with tin oxide and wax polishing to
get maximum shine to the flooring.

Providing and fixing water closet squatting pan

(Indian type W.C. pan) with 100 mm sand cast Iron
P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually
controlled device (handle lever) conforming to IS :
1.82 1.00 EA 3405.06 2857.18
7231, with all fittings and fixtures complete,
including cutting and making good the walls and
floors wherever required: White Vitreous china
Orissa pattern W.C. pan of size 580x440 mm with
integral type foot rests.

Providing and fixing white vitreous china pedestal

type water closet (European type W.C. pan) with
seat and lid, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually
1.83 controlled device (handle lever), conforming to IS : 1.00 EA 4912.26 4121.88
7231, with all fittings and fixtures complete,
including cutting and making good the walls and
floors wherever required: W.C. pan with ISI marked
white solid plastic seat and lid.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Extra for using coloured pedestal type W.C. pan (
European type ) with low level cistern of same
1.84 1.00 EA 1589.88 1334.06
colour instead of white vitreous china W.C pan and
cistern.
Providing and fixing white vitreous china extended
wall mounting water closet of size 780 x 370 x 690
mm of approved shape including providing & fixing
1.85 white vitreous china cistern with dual flush fitting, 1.00 EA 9720.95 8156.85
of flushing capacity 3 litre / 6 litre ( adjustable to
4 litre / 8 litres ), including seat cover , and cistern
fittings, nuts, bolts and gasket etc complete.

Providing and fixing vitreous china dual purpose

closet suitable for use as squatting pan or European
type water closet (Anglo Indian W.C pan) with seat
& lid fixed with C.P. brass hinges and rubber
buffers, 10 litre low level flushing cistern with
fitting and brackets, 40 mm flush bend, 20 mm
over flow pipe, with specials of standard make and
1.86 1.00 EA 7540.55 6327.28
mosquito proof coupling of approved municipal
design complete, including painting of fittings and
brackets, cutting and making good the walls and
floors wherever required: White vitreous china dual
purpose WC pan with white solid plastic seat and
lid with white vitreous china flushing cistern and
C.P. flush bend.
Providing and fixing wash basin with C.I. brackets,
15 mm C.P. brass pillar tap, 32 mm C.P. brass
1.87 waste of standard pattern, including painting of
fittings and brackets, cutting and making good the
walls wherever required:
White Vitreous China Flat back wash basin size
1.88 1.00 EA 2184.94 1833.39
550x400 mm with single 15 mm C.P. brass pillar tap.

White Vitreous China Angle back wash basin size

1.89 1.00 EA 1771.58 1486.53
400x400 mm with single 15 mm C.P. brass pillar tap

White Vitreous China Flat back wash basin of size

1.90 1.00 EA 1706.16 1431.64
450x300 mm with single 15 mm C.P. brass pillar tap.

Providing white or coloured

oval/circular/square/rectangular shaped vitrified
ceramic wash basin of minimum length of 300mm
1.91 with depth and width to suit the manufacturer's 1.00 EA 4315.38 3621.03
specification for specified legth complete with SS
bottle trap & SS waste coupling complete fitting in
either granite/marble counter.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing white or coloured
oval/circular/square/rectangular shaped vitrified
ceramic wash basin of minimum length of 450mm
1.92 with depth and width to suit the manufacturer's 1.00 EA 4996.75 4192.77
specification for specified legth complete with SS
bottle trap & SS waste coupling complete fitting in
either granite/marble counter.
Providing and fixing P.V.C. low level flushing
cistern with manually controlled device (handle
1.93
lever) conforming to IS : 7231, with all fittings and
fixtures complete:
1.94 10 litre capacity - White 1.00 EA 887.60 744.79
1.95 10 litre capacity - coloured 1.00 EA 945.75 793.58
Providing and fixing solid plastic seat with lid for
1.96
pedestal type W.C. pan complete: (Heavy Duty)
1.97 White solid plastic seat with lid 1.00 EA 421.54 353.72
Coloured (other than black & white) solid PVC seat
1.98 1.00 EA 397.92 333.90
with lid
Providing and fixing P.V.C. waste pipe for sink or
1.99
wash basin including P.V.C. waste fittings complete
2.00 Semi rigid pipe 32 mm dia 1.00 EA 79.04 66.32
2.01 Semi rigid pipe 40 mm dia 1.00 EA 85.40 71.66
2.02 Flexible pipe 32 mm dia 1.00 EA 76.31 64.04
2.03 Flexible pipe 40 mm dia 1.00 EA 79.04 66.32
Providing and fixing 32 mm dia, 80mm high CP
2.04 brass Waste Coupling for wash basin and sink, of 1.00 EA 681.38 571.74
Jaquar make , Cat No. ALD-705.
Providing and fixing CP brass Bottle Trap for Wash
2.05 basin and sink of Jaquar make, Cat No. ALD- 1.00 EA 1748.86 1467.47
769L250X190.
Providing and fixing floor trap of self cleansing
design with screwed down or hinged grating with or
2.06
without vent arm complete, including cost of
cutting and making good the walls and floors :
100 mm inlet and 75 mm outlet - PVC or Sand cast
iron with one strainer in SS and one strainer in PVC
2.07 1.00 EA 1048.41 879.72
(both the strainers shall have a circular cut to
insert wast coupling pipe).

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &
cold water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes &
2.08
fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same
including testing of joints complete as per direction
of Engineer in Charge. Concealed work, including
cutting chases and making good the walls etc.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
15 mm nominal outer dia Pipes :
2.09 1.00 M 168.07 141.03
EXTERNAL/EXPOSED
20 mm nominal outer dia Pipes :
2.10 1.00 M 196.24 164.66
EXTERNAL/EXPOSED
25 mm nominal outer dia Pipes :
2.11 1.00 M 237.12 198.97
EXTERNAL/EXPOSED
32 mm nominal outer dia Pipes :
2.12 1.00 M 305.26 256.14
EXTERNAL/EXPOSED
2.13 15 mm nominal outer dia Pipes : CONCEALED 1.00 M 277.09 232.51
2.14 20 mm nominal outer dia Pipes : CONCEALED 1.00 M 303.44 254.62
2.15 25 mm nominal outer dia Pipes : CONCEALED 1.00 M 360.67 302.64
2.16 32 mm nominal outer dia Pipes : CONCEALED 1.00 M 433.35 363.63
Providing and fixing PVC pipes of approved make
2.17 including all PVC bends, elbows, special
arrangements, complete
2.18 32mm (10kg/cm2) 1.00 M 113.56 95.29
2
2.19 40mm (10kg/cm ) 1.00 M 190.79 160.09
2.20 50mm (6kg/cm2) 1.00 M 190.79 160.09
2
2.21 75mm (6kg/cm ) 1.00 M 281.64 236.32
2.22 110mm (6kg/cm2) 1.00 M 358.86 301.12
Providing and fixing G.I. Pipes complete with G.I.
fittings and clamps, i/c making good the walls etc.
2.23 concealed pipe, including painting with anti
corrosive bitumastic paint, cutting chases and
making good the wall: (for water and air)
2.24 B' Class 15 mm dia nominal bore 1.00 M 190.79 160.09
2.25 B' Class 20 mm dia nominal bore 1.00 M 215.31 180.67
Providing and fixing gun metal gate valve with C.I.
2.26
wheel of approved quality (screwed end):
2.27 25 mm nominal bore 1.00 EA 440.62 369.73
2.28 32 mm nominal bore. 1.00 EA 515.12 432.24
2.29 40 mm nominal bore 1.00 EA 601.43 504.66
2.30 50 mm nominal bore 1.00 EA 771.32 647.21
Providing and fixing 600x450 mm beveled edge
mirror of superior glass (of approved quality)
2.31 complete with 6 mm thick hard board ground fixed 1.00 EA 814.92 683.80
to wooden cleats with C.P. brass screws and
washers complete
Providing and fixing 600 mm glass shelf of Jaquar
make Florentine collection Cat No. ACN-1171N or
2.32 equivalent make as directed by Engineer in-charge 1.00 EA 1726.15 1448.41
complete fixed with 40 mm long screws, rawl plugs
etc., complete
Providing and fixing corner glass shelf with bracket
of Jaquar make Florentine collection Cat No. ACN-
2.33 1173 or equivalent make as directed by Engineer in- 1.00 EA 1635.30 1372.18
charge complete fixed with 40 mm long screws,
rawl plugs etc., complete
Providing and fixing C.P. brass pillar / bib cock of
2.34 Jaquar make Florentine collection Cat No. FLR- 1.00 EA 1698.90 1425.54
5047N: 15 mm nominal bore
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing C.P. brass long neck pillar cock
2.35 of Jaquar make Florentine collection Cat No. FLR- 1.00 EA 2316.68 1943.92
5015: 15 mm nominal bore
Providing and fixing C.P. brass angular body bib
2.36 cock of Jaquar make, Florentine collection Cat No. 1.00 EA 1453.60 1219.72
FLR-5037N: 15 mm nominal bore
Providing and fixing C.P. brass stop cock
2.37 (concealed) of Jaquar make, Florentine collection 1.00 EA 2589.23 2172.62
Cat No. FLR-6081N: 15 mm nominal bore
Providing and fixing C.P. brass angle valve of
2.38 Jaquar make, Florentine collection Cat No. FLR- 1.00 EA 1589.88 1334.06
5053N: 15 mm nominal bore
Providing and fixing stainless steel strainer
(grating) below decorative PVC strainer with hole
2.39 1.00 EA 317.98 266.81
for waste pipe for floor and with Nahani trap 75mm
dia. And weight should not be less than 70gms.

Providing and fixing Health facet with 8mm dia.,

1meter long flexible tube and wall hook, Jaguar
2.40 1.00 EA 1930.56 1619.93
make collection cat. No. ALD-577 or equivalent in
brass as approved by Engineer-In-Charge.
Providing and fixing Mixer type pillar cock with
braided hoses for connection- Jaguar make
2.41 1.00 EA 3906.55 3277.99
Florentine collection cat. No.-FLR-5025B or
equivalent approved by Engineer-In-charge.
Providing and fixing 2-way bib cock- Jaguar make
2.42 Florentine collection cat. No.-FLR-5041N or 1.00 EA 2134.98 1791.46
equivalent approved by Engineer-In-charge
Providing and fixing 3 in 1 wall mixer with provision
for head shower and hand shower- Jaguar make
2.43 1.00 EA 6495.78 5450.60
Florentine collection cat. No.-FLR-5143 or
equivalent approved by Engineer-In-charge.
Providing and fixing sink cock with regular swing
spout- Jaguar make Florentine collection cat. No.-
2.44 1.00 EA 2271.25 1905.81
CON-5347N or equivalent approved by Engineer-In-
charge
Providing and fixing sink mixer with swinging
casted spout- Jaguar make Florentine collection
2.45 1.00 EA 5223.88 4383.35
cat. No.-FLR-5163 or equivalent approved by
Engineer-In-charge
Providing and fixing Over head shower- Jaguar
2.46 make Cat. No. OHS-1789 or equivalent approved by 1.00 EA 2725.50 2286.97
Engineer-In-charge
Providing and fixing shower arm 190mm long with
2.47 flange- Jaguar make Cat. No. SHA-477 or equivalent 1.00 EA 817.65 686.09
approved by Engineer-In-charge
Providing and fixing Hand shower- Jaguar make
2.48 Cat. No. HSH-1937 or equivalent approved by 1.00 EA 1544.45 1295.95
Engineer-In-charge
Providing and fixing 600mm long towel rod- Jaguar
2.49 make collection cat. No. ACN-1111NM or equivalent 1.00 EA 1635.30 1372.18
approved by Engineer-In-charge
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing towel ring- Jaguar make
2.50 collection cat. No.-ACN-1121N or equivalent 1.00 EA 1181.05 991.02
approved by Engineer-In-charge
Providing and fixing Soap dish- Jaguar make
2.51 collection cat. No.-1131N or equivalent approved 1.00 EA 772.23 647.97
by Engineer-In-charge
Providing and fixing Concealed flush valve for EWC-
2.52 Jaguar make cat. No.-FLV-1029 NELF Metropole or 1.00 EA 5905.25 4955.10
equivalent approved by Engineer-In-charge

Providing and fixing 450mm long braided hose with

nuts and washers etc of Jaquar make, Cat No. ALD-
2.53 1.00 EA 363.40 304.93
803AB or equivalent make for Wash basin as per
direction of Engineer-In-Charge
Providing and fixing 450mm long braided hose with
nuts and washers etc of Jaquar make, Cat No. ALD-
2.54 1.00 EA 363.40 304.93
805B or equivalent make for Geysers as per
direction of Engineer-In-Charge
Providing and fixing 1.50 M long flexible shower
tubes with wall hook for Hand showers of Jaquar
2.55 1.00 EA 2271.25 1905.81
make, Cat No. SHA-549D8/ SHA-555 or equivalent
make as per direction of Engineer-In-Charge
Providing and fixing SS wall flange of approved
2.56 make for plumbing work only complete as per 1.00 EA 590.53 495.51
direction of Engineer-In-Charge
Providing First Class Teak Wood work in frames of
doors, windows, clerestory windows and other
2.57 1.00 M3 81765.00 68609.01
frames, and fixed in position with hold fast lugs or
with dash fasteners of required dia & length.

Providing and fixing to existing door frames 30 mm

thick Fiberglass reinforced Plastic (F.R.P.) flush
door shutter in different plain and wood finish
made with fire retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP
laminate all around, with suitable wooden blocks
2.58 inside at required places for fixing of fittings and 1.00 M2 2271.25 1905.81
polyurethane foam (PUF)/ Polystyrene foam to be
used as filler material throughout the hollow panel,
casted monolithically with testing parameters of
F.R.P. laminate conforming to table - 3 of IS:
14856, complete as per direction of Engineer-in-
charge
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing UPVC coated Flush doors in
Plain or wodden finish for Toiltes/Teraace/Open
Area made up of flush Marine Block Board with pine
wood 35mm thk., of approved make and shade,
2.59 100x30mm hinges, Godrej make concealed lock 1.00 M2 3634.00 3049.29
with handle/ Cylindrical Lock, door stoper, 6"
Tower bolt (hardware fittings in brass only) or as
may be directed by EIC etc. complete as per
direction
Providing and fixing Shutter below Kitchen Platform
/ Counter Basin made up of Marine Ply
(B.W.P)19mm, outside 1mm thk. Designer
Laminated with twoor more shade/Design of
Designer laminate & inside 1.0mm laminate of
2.60 approved make and shade with wooden beading 1.00 M2 6359.50 5336.26
and 50x35mm teak wood frame and shelf including
all hardware fitting such as SS handle, brass hinges,
magnet lock with or any other fitting as directed by
EIC, polish on boarder etc. complete as per
direction (Basic cost of outside laminate : Rs. 700/-
per sqm.)
Providing and fixing Shutter for loft made up of
Marine Ply ( B.W.R) 19mm, outside 1mm thk.
Laminated on Two or more Designs or shade
designer Laminate & inside 1.0 mm laminate of
approved make and shade with wooden beading
2.61 1.00 M2 4542.50 3811.61
and 50x35mm teak wood frame including all
hardware fitting such as SS handle, brass hinges,
magnet lock with polish on border etc. complete as
per direction (Basic cost of Outside laminate : Rs.
700/- per sqm.)
Providing and fixing wooden shelves made up of
marine ply (B.W.R) 19mm thk with providing
wooden beading to edges including providing white
2.62 1.00 M2 1817.00 1524.64
laminates of 1mm etc completed with wooden
beading round for loft and existing wardrobe
complete as per direction
Providing and fixing Main Door as per standard size
made up of flush Marine Block Board with pine
wood 35mm thk., both side 1mm thk. Laminate,
125x32mm hinges, 50x12mm thk. Wooden beading,
2.63 Aldrop 300mm, Godrej make night latch(Rim lock), 1.00 EA 15444.50 12959.48
peep hole, handle 200mm Tower bolt, Safety chain
(all hardware fittings are of brass only) or as may
may be directed by EIC etc. complete as per
direction (Basic cost of laminate : Rs. 700/- per
sqm.)
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing Flush doors for Bed / Kitchen
made up of flush Marine Block Board with pine
wood 35mm thk., both side 1mm thk. Designer
Laminate of minimum two shades/Designs of
approved make and shade, 100x30mm hinges,
2.64 1.00 EA 13627.50 11434.84
50x12mm thk. Wooden beading, Godrej make
concealed lock with handle, door stoper, 6" Tower
bolt (hardware fittings in brass only) or as may be
directed by EIC etc. complete as per direction
(Basic cost of laminate : Rs. 700/- per sqm.)
Providing and fixing UPVC (Fenesta Make) two track
sound proof sliding windows with double toughened
2.65 glass complete as per site condition, drawing to be 1.00 M2 16353.00 13721.80
made by contractor and get approval of Engineer-in-
charge.
Providing and fixing UPVC (Fenesta Make) Three
track sound proof sliding windows with double
toughened glass including one shutter for SS
mosquito net complete as per site condition,
drawing to be made by contractor and get approval
2.66 1.00 M2 22712.50 19058.06
of Engineer-in-charge. No extra payment for SS
mosquito net shall be entertained by IOCL. Note :
For payment purpose, only 3 track glass window
with frame shall be considered, SS mosquito net
rate included in pricing.

Providing and fixing UPVC (Fenesta Make) Four

track sound proof sliding windows with double
toughened glass including one shutter for SS
mosquito net complete as per site condition,
drawing to be made by contractor and get approval
2.67 1.00 M2 30798.15 25842.73
of Engineer-in-charge. No extra payment for SS
mosquito net shall be entertained by IOCL. Note :
For payment purpose, only 4 track glass window
with frame shall be considered, SS mosquito net
rate included in pricing.
Providing and fixing UPVC (Fenesta Make) sound
proof casement windows with double toughened
2.68 glass including provision of mosquito mesh 1.00 M2 19078.50 16008.77
complete as per drawing and directions of Engineer-
in-charge.
Providing and fixing Stainless Steel Mirror Cabinet
of size 18"x16"x4"deep or standard size of
2.69 Manufacturer matching the above dimension with 1.00 EA 6359.50 5336.26
magnetic lock, shelf inside etc. complete as per
direction
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6

Providing & fixing 450mm deep wooden cabinet in

Kitchen, made of 19 mm thick marine (B.W.P) ply
on all sides except 6mm thick for back with shelves
arrangement as per drawing. The edges are to be
finished with wooden beading with necessary
polishing. The inner surfaces of the box is to be
finished with 1 mm thick laminate of approved
color and shutters in the front made of 19 mm thick
marine ply and fixed with brass hinges, Exposed
2.70 1.00 M2 14990.25 12578.32
surfaces/edges to be finished with 1 mm thick
laminate of approved make, color and design,
including providing all necessary hardwares such as
magnet, towerbolts, handles etc. complete. The
inner side of the front shutter is also to be
laminated with 1mm thick aprroved laminate as per
direction (Measurement of front elevation shall be
consider for making payment). (Basic cost of
Outside laminate : Rs. 700/- per sqm.)

Providing and fixing wooden Wardrobe up to 24"

deep made up of 19mm thick marine (B.W.R) ply on
all sides with 6mm thick ply for rear. Including
Shutters with designer Laminates of minmum two
designs or more of minimum 1mm thick. the Back
of door shutter shall be of 1mm white Laminate.
Note: For Shutters only block bord with pine wood
shall be used for doors of Wardrobe. Shelves to be
provided are of 12mm thick commercial ply as per
appd drawing. All internal surfaces are to be
laminated with 1.0 mm thick lamination sheet of
approved make and colour and external sides to be
2.71 1.00 M2 17261.50 14484.12
laminated with 1mm lamination sheet of approved
make and colour with wooden beadings for the
edges as per the instructions of the site incharge
including providing all necessary Hardware such as
brass hinges, MS Heay duty powder coated
telescopic channels, 20mm dia SS rail for cloth
hangers, towerbolts, locks, magnetic locks,
handles, rollers etc. with 3" Vijayan door lock, etc.
complete as per direction of Engineer-in-charge
(Measurement of front elevation shall be
considered for making payment). (Basic cost of
Outside laminate : Rs. 700/- per sqm.)
Providing Boxing for existing wooden door frames
using 12mm thk marine ply and laminating all
exposed surface with 1mm thk. appd make
2.72 laminate and wooden beedings including allied 1.00 M 1181.05 991.02
hardware and fittings as per instructions of
Engineer-In-Charge. (Basic cost of laminate : Rs.
700/- per sqm.)
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing wall pannelling using 12mm thk marine
ply and laminating with 1mm thk. appd make
2.73 laminate, including all allied hardware, beedings 1.00 M2 2725.50 2286.97
and fittings as approved by Engineer-In-Charge.
(Basic cost of laminate : Rs. 700/- per sqm.)

Providing and fixing stainless steel Trolley Basket

drawer of grade SS 304 of standard collates by
using 19mm thk. Marine ply, beeding,
handle(4"/6"), laminating all exposed surface with
2.74 1mm thk. appd make laminate with french polish
including allied hardware, fittings etc. complete.
(Measurement of front elevation shall be consider
for making payment). (Basic cost of laminate : Rs.
700/- per sqm.)
2.75 for depth up to 21" 1.00 M2 29980.50 25156.64
2.76 for depth up to 18" 1.00 M2 26619.05 22336.04
2.77 for depth up to 13" 1.00 M2 23621.00 19820.38
Refixing of IOCL supplied door shutter to existing
frame including repairing of the same if required
2.78 and other allied work as per direcition of Engineer- 1.00 EA 4088.25 3430.45
In-Charge. The work includes all required CCTW for
rectification of doors.
Refixing of IOCL supplied existing wardrobe /
kitchen cabinet on walls with proper clamps/
2.79 screws including repairing of the same if required 1.00 EA 5451.00 4573.93
and other allied work as per direcition of Engineer-
In-Charge.
Providing and fixing aluminium round shape handle
2.80 of outer dia 100mm with SS screws etc. complete
as per direction of Engineer-In-charge
2.81 Anodized ( AC 15) aluminium 1.00 EA 363.40 304.93
Providing and fixing curtain rods of 1.25 mm thick
Stainless steel Rods of SS-304 material with two
2.82
Stainless steel brackets fixed with Stainless steel
screws and wooden plugs etc.
2.83 20 mm diameter. 1.00 M 772.23 647.97
2.84 25 mm diameter 1.00 M 908.50 762.32

Supplying and fixing Electric Chimney, 600mm wide

having suction capacity of 1000 cum/ hour with
filter and duct complete in all respects (Make :
2.85 Glen/Sleek/Faber) or equivalent). Cost is inclusive 1.00 EA 18170.00 15246.45
of supply and installation of chimney with max. 6m
long exhaust pipe and accessories along with
liasoning with vendor's representative complete
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Supplying and fixing Gas Hob with toughned glass
top in any colour & design as directed by EIC
2.86 (600mm width with front control panel, automatic 1.00 EA 18170.00 15246.45
ignition, 3+1 triple ring burner complete in all
respects) (Make : Glen/Sleek/Faber) or equivalent)

Supplying and fixing water purifier with all fixtures

2.87
and fittings complete of M/s. Eureka Forbes.
2.88 Model - Aquaguard Compact/Dr. Compact 1.00 EA 9993.50 8385.55
Model - Aquguard Enhance RO+UV/Dr. Aquaguard
2.89 1.00 EA 19078.50 16008.77
Magna UV
Providing manpower for cleaning the Flat
completely including floor tiles, wall tiles,
furnitures, doors & windows, switch boards, light
fittings, sanitary & plumbing fittings etc., using
2.90 1.00 MAN DAY 663.21 556.50
necessary cleaning material, soap, detergents acid
etc., along with disposal of all garbage, debris etc
complete in all respects as per instruction of Site in-
charge.

Removing old upholstery of back and seat of sofa

and refixing new upholstery of Rexene/cloth with
2" thick U foam of approved quality, shade and
specifications.The rate shall be inclusive of all
labour, transportation, hardware, materials like
2.91
cloths, gunny cloths, Rexene cloth, wostic, U foam,
kathya, yarn, threads etc, and should also include
all other outgoings like octroi, duties, wastages etc
all complete as per instructions of our officer in
charge(basic rate of upholstery Rs. 600/- per mtr)

2.92 Sofa 3 seater 1.00 EA 13627.50 11434.84

2.93 Single seater Sofas 1.00 EA 5905.25 4955.10
Making new Sofa.The rate shall be inclusive of all
labour, transportation, hardware, materials like
wooden frame, cloths, gunny cloths, Rexene or
cloth, wostic, U foam, kathya, yarn, threads etc,
2.94
and should also include all other outgoings like
octroi, duties, wastages etc all complete as per
instructions of our officer in charge.(basic rate of
upholstery Rs. 600/- per mtr)
2.95 Single Seater 1.00 EA 9993.50 8385.55
2.96 2 seater 1.00 EA 19078.50 16008.77
2.97 3 seater 1.00 EA 27255.00 22869.67
Making & fixing of partially glazed door of size 6'6"
x 3'6" by using Teakwood patti 3"x2" Teakwood
2.98 moulding, 5 mm brown glass, hinges, Dead Lock, 1.00 Nos 17715.75 14865.29
handle, other accessories etc. including polish
complete as directed by EIC.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing & making new partition by using 12mm
thk marine plywood on either side, TKW(2”x2 ”),
beeding patti with both side laminate or premium
veneer with french polish on both sides of any
2.99 1.00 M2 5905.25 4955.10
colour as may be directed by EIC . The work
includes all fittings & fixtures, complete finished
including plywood skirting (4 ” x ½ ”) of required
size complete as directed by EIC.

S/f of wooden cabinets , side units of 450 mm

depth using 19 mm thick Marine Ply wood, and 6
mm thick marine ply wood for back including all
hardware fitting such as SS handle, brass hinges,
magnet lock/ main lock with polish on border
(Dharr Patti), 1 mm thick laminate on outside (with
3.00 laminate of approved make) and 1 mm thick white 1.00 M2 14536.00 12197.16
laminate inside and backide of cabinet. The work
also includes providing appropriate shelves with 1
mm white laminate on all sides by providing shelf
buttons (Measurement of front elevation shall be
consider for making payment) (Basic cost of
outside laminate : Rs. 700/- per sqm.)

S/f of wooden cabinets , side units of 600 mm

depth using 19 mm thick Marine Ply wood, and 6
mm thick marine ply wood for back including all
hardware fitting such as SS handle, brass hinges,
magnet lock/ main lock with polish on border
(Dharr Patti), 1 mm thick laminate on outside (with
3.01 laminate of approved make) and 1 mm thick white 1.00 M2 16353.00 13721.80
laminate inside and backide of cabinet. The work
also includes providing appropriate shelves with 1
mm white laminate on all sides by providing shelf
buttons (Measurement of front elevation shall be
consider for making payment) (Basic cost of
outside laminate : Rs. 700/- per sqm.)
Apex Paint for Cement Flower Pots.Make: Asian
3.02 1.00 M2 227.13 190.58
Paints, ICI Dulex and Berger.
3.03 Big 1.00 Nos 181.70 152.46
3.04 Small 1.00 Nos 136.28 114.35
3.05 Medium 1.00 Nos 145.36 121.97
Application of 1 coat of Apex Paint for external
3.06 surfaces of walls/flower beds.Make: Asian Paints, 1 M2 227.13 190.58
ICI Dulex and Berger.
White washing with lime to give an even shade with
3.07 two or more coats on old surface.Make: Asian 1.00 M2 16.35 13.72
Paints, ICI Dulex and Berger.
Removing existing oil bound distemper,water
proofing cement paint, enamel paint etc from all
surfaces by scrapping,sand papering and preparing
3.08 the surface smooth including necessary repairs to 1.00 M2 6.36 5.34
scratches, disposing off the debris to an
unobjectionable place outside the premises etc.
complete.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Finishing with Epoxy paint (two or more coats) at
all locations prepared and applied as per
manufacturer's specifications including appropriate
3.09 1.00 M2 119.92 100.63
priming coat, preparation of surface, etc. complete
on steel work.Make: Asian Paints, ICI Dulex and
Berger.
French spirit polishing with two or more coats on
3.10 new works including a coat of wood filler.Make: 1.00 M2 198.96 166.95
Asian Paints, ICI Dulex and Berger.
French spirit polishing with one or more coats on
3.11 1.00 M2 90.85 76.23
old works.Make: Asian Paints, ICI Dulex and Berger.

Varnishing with varnish of approved brand and

manufacture: Two or more coats glue sizing with
3.12 1.00 M2 119.01 99.86
spar varnish over an undercoat of flatting varnish
.Make: Asian Paints, ICI Dulex and Berger.

Providing and applying 1 or more coats of

Mellamine polishing(using compressor machine) of
approved quality over wood surface after scraping
the polished wooden surface and rectifying the
3.13 surface depression, cracks, patches, holes etc. with 1.00 M2 227.13 190.58
fillers to have a smooth even, uniform fine finished
surface of approved shade complete as per
direction of Engineer-In-Charge.Make: Asian Paints,
ICI Dulex and Berger.

Distempering with 1 st quality acrylic distemper,

having VOC ( Volatile Organic Compound ) content
less than 50 grams / litre, of approved brand and
3.14
manufacture, including applying additional coats
wherever required , to achieve even shade and
colour.Make: Asian Paints, ICI Dulex and Berger.
3.15 One coat 1.00 M2 54.51 45.74
3.16 Two coats 1.00 M2 72.68 60.99
Wall painting with acrylic emulsion paint, having
VOC ( Volatile Organic Compound ) content less
than 50 grams / litre, of approved brand and
3.17
manufacture, including applying additional coats
wherever required to achieve even shade and
colour.Make: Asian Paints, ICI Dulex and Berger.
3.18 One coat 1.00 M2 90.85 76.23
3.19 Two coats 1.00 M2 83.58 70.13
Wall painting with premium acrylic emulsion paint
of interior grade, having VOC ( Volatile Organic
Compound ) content less than 50 grams / litre of
3.20 approved brand and manufacture, including
applying additional coats wherever required to
achieve even shade and colour.Make: Asian Paints,
ICI Dulex and Berger.
3.21 One coat 1.00 M2 109.02 91.48
3.22 Two coats 1.00 M2 154.45 129.59
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Painting walls, wood and steel surface with
synthetic enamel paint, having VOC ( Volatile
Organic Compound ) content less than 150 grams /
3.23 litre, of approved brand manufacture, including
applying additional coats wherever required to
achieve even shade and colour (excluding primer
coat). Make: Asian Paints, ICI Dulex and Berger.
3.24 One coat 1.00 M2 95.39 80.04
3.25 Two coats 1.00 M2 136.28 114.35
Painting walls with water based plastic emulsion
paint, having low VOC ( Volatile Organic Compound
) of approved brand manufacture, including
3.26
applying additional coats wherever required to
achieve even shade and colour (excluding primer
coat). Make: Asian Paints, ICI Dulex and Berger.
3.27 One coat 1.00 M2 90.85 76.23
3.28 Two coats 1.00 M2 131.73 110.54
Applying priming coats with primer of approved
brand and manufacture, having low VOC ( Volatile
3.29
Organic Compound ) content.Make: Asian Paints, ICI
Dulex and Berger.
With ready mixed pink or grey primer on wood
work ( hard and soft wood ) having VOC content
3.30 1.00 M2 54.51 45.74
less than 50 gram / litre.Make: Asian Paints, ICI
Dulex and Berger.
With ready mixed red oxide zinc chromatic on steel
/ iron works having VOC content less than 250
3.31 1.00 M2 63.60 53.36
grams / litre.Make: Asian Paints, ICI Dulex and
Berger.
With water thinnable cement primer on wall
3.32 surface having VOC content less than 50 grams / 1.00 M2 36.34 30.49
litre.Make: Asian Paints, ICI Dulex and Berger.
Finishing walls with Acrylic smooth exterior paint of
required shade (Two or more coat applied with
1.67ltr/10Sqm over and including priming coat of
3.33 1.00 M2 136.28 114.35
exterior primer applied @2.20Kg/10Sqm) over old/
new surface.Make: Asian Paints, ICI Dulex and
Berger.
Finishing walls with Acrylic smooth exterior paint of
required shade (Two or more coat applied with
3.34 1.00 M2 109.02 91.48
1.67ltr/10Sqm over old existing cement paint
surface.Make: Asian Paints, ICI Dulex and Berger.
Finishing walls with water proof cement paint of
required shade (Two or more coat applied @
3.35 1.00 M2 104.48 87.67
3.84Kg/10Sqm).Make: Asian Paints, ICI Dulex and
Berger.
Finishing with Deluxe Multi surface paint system for
interiors and exteriors using primer as per
3.36
manufacturers specification.Make: Asian Paints, ICI
Dulex and Berger.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Two or more coats applied on walls @ 1.25 ltr/10
sqm over an under coat of special primer applied
3.37 @0.75 ltr/ 10 sqm of approved brand and 1.00 M2 102.66 86.14
manufacture.Make: Asian Paints, ICI Dulex and
Berger.
Painting wood work with Deluxe Multi Surface Paint
of required shade. Two or more coat applied @
0.90 ltr/10 sqm over an under coat of primer
3.38 1.00 M2 89.94 75.47
applied @0.75 ltr/ 10 sqm of approved brand and
manufacture.Make: Asian Paints, ICI Dulex and
Berger.
Painting Steel work with Deluxe Multi Surface Paint
to give an even shade. Two or more coat applied @
0.90 ltr/10 sqm over an under coat of primer
3.39 1.00 M2 92.67 77.76
applied @ 0.80 ltr/10 sqm of approved brand and
manufacture.Make: Asian Paints, ICI Dulex and
Berger.
Per
Lettering with Black japan paint of approved brand
letter
3.40 and manufacture.Make: Asian Paints, ICI Dulex and 1.00 6.36 5.34
per cm
Berger.
height
Providing and applying new generation white
cement based putty cum gypsum with primer in
powder form (whiting based mineral putty) ( polite
or equivalent brand) of average thickness 1mm or
3.41 1.00 M2 90.85 76.23
more of approved brand and manufacture, over
plastered wall surface or POP surface to prepare
the surface smooth and even.Make: Asian Paints,
ICI Dulex and Berger.

Providing and applying Textured surface using Zinc

Oxide Putty & Primer, Complete with one coat of
3.42 1.00 M2 590.53 495.51
Zinc Oxide primer as may be directed by Eic.Make:
Asian Paints, ICI Dulex and Berger.
Providing and applying 2 coats of synthetic enamel
paint to ceiling fans over a coat of primer of size
48"/52"/56" sweep after scraping thoroughly with
3.43 1.00 EA 181.70 152.46
sand paper etc. to remove rust, dust and dirt
before the painting.Make: Asian Paints, ICI Dulex
and Berger.
3.44 S/f of new Vertical Blinds/Roller Blinds 1.00 M2 1499.03 1257.83
Shampoo Cleaning & Repairing of old Vertical
3.45 Blinds/Roller Blind including replacement of 1.00 M2 454.25 381.16
damaged parts
Shifting of Residential Flat Material & rearranging
3.46 incl of labours, transport, packing material, loading
unloading etc, complete. Within Same Flat.
3.47 1bedroom hall kitchen 1.00 Nos 1817.00 1524.64
3.48 2bedroom hall kitchen 1.00 Nos 2271.25 1905.81
3.49 3bedroom hall kitchen 1.00 Nos 2725.50 2286.97
3.50 Removal of unwanted debris from site for 1 1.00 LS 8176.50 6860.90
bedroom hall kitchen flats complete and disposing
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Removal of unwanted debris from site for 2
3.51 bedroom hall kitchen flats complete and disposing 1.00 LS 9993.50 8385.55
of the same to un-objectionable place

Removal of unwanted debris from site for 3

3.52 bedroom hall kitchen flats complete and disposing 1.00 LS 11810.50 9910.19
of the same to un-objectionable place

Providing and laying Vitrified Tiles for Flooring of

approved make and approved sample in pattern as
per detailed drawings up to 25mm thick bed of 1:4
cement mortar including surface preparation,
giving necessary slopes, cleaning joints and
3.53 grouting them in neat white cement paste with
pigmented additives to match shade of the tile. etc
complete Cost to be inclusive of taping on all the
joints & covered the entire flooring with good
quality plastic & POP above. Cover & Tape to be
removed before final cleaning
600mm x600mm Cost of Vitrified tiles Rs.75/sqft
3.54 1.00 M2 1443.61 1211.33
inclusive of delivery,
800mm x800mm Cost of Vitrified tiles Rs.90/sqft
3.55 1.00 M2 1563.53 1311.96
inclusive of delivery,
900mm x900mm Cost of Vitrified tiles Rs.90/sqft
3.56 1.00 M2 2089.55 1753.34
inclusive of delivery,
1000mm x1000mm Cost of Vitrified tiles
3.57 1.00 M2 2271.25 1905.81
Rs.130/sqft inclusive of delivery,
1200mm x1200mm Cost of Vitrified tiles
3.58 1.00 M2 2770.93 2325.08
Rs.165/sqft inclusive of delivery,
Providing and laying 300mm x300mm Antiskid Tiles
for Toilet Flooring of approved make and approved
sample in pattern as per detailed drawings up to
25mm thick bed of 1:4 cement mortar including
surface preparation, giving necessary slopes,
cleaning joints and grouting them in neat white
3.59 cement paste with pigmented additives to match
shade of the tile. etc complete Cost to be inclusive
of taping on all the joints & covered the entire
flooring with good quality plastic & POP above.
Cover & Tape to be removed before final cleaning

300mm x300mm Cost of Antiskid tiles Rs.60/sqft

3.60 1.00 M2 1185.59 994.83
inclusive of delivery,
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing and fixing Ist quality ceramic wall tiles
conforming to IS:15622 (thickness to be specified
by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-
3.61 Charge, in skirting, risers of steps and dados, over
12 mm thick bed of cement mortar 1:3 (1 cement :
3 coarse sand) and jointing with grey cement slurry
@ 3.3kg per sqm, including pointing in white
cement mixed with pigment of matching shade
complete.
3.62 300mm x300mm Basic Cost of tile Rs.55/sqft 1.00 M2 976.64 819.50
3.63 300mm x450mm Basic Cost of tile Rs.65/sqft 1.00 M2 1112.91 933.84
3.64 300mm x600mm Basic Cost of tile Rs.70/sqft 1.00 M2 1249.19 1048.19
Supply & Installation of Wooden Finished Floor
3.65 Panels 8mm Thick of Approved Brand, complete. 1.00 M2 1817.00 1524.64

Providing and Cladding on walls machine cut and

machine Pre-polished Granite slab, 20mm thick of
size as per drawing set on backing coat of cement
mortar 1:3 not exceeding 12mm thick, including
pointing with matching Epoxy grouts to match the
shade of the slab. The rate should also be inclusive
3.66 of applying temporary supports to the cladded 1.00 M2 4297.21 3605.78
stone as directed by the Architect at site. Cost to
be inclusive of hand buffing/cleaning on surface,
groove, chafering/moulding etc. complete. as per
directions.
Base Rate = Rs. 2165/- per sqm.

3.67 Insect RepeLlent Machine Repair 1.00 Nos 1771.58 1486.53

3.68 RCC Core Cutting 100mm dia 1.00 Nos 2589.23 2172.62
3.69 Anchor fastener for fans 1.00 Nos 227.13 190.58
Anodizing for existing windows removing & refixing
3.70 with rubber gasket & necessary Hardwares, 1.00 M2 1362.75 1143.48
Complete.
Supply & installation of Mosquitoes Stainless Steel
Net windows in aluminium extruded profiles, etc
3.71 complete. In Existing Allunminium Frame or 1.00 M2 2907.20 2439.43
Window. Item includes removing & refixing in the
existing or new window.
Brass health faucet with 1metre tube of S.S. of
3.72 1.00 Nos 863.08 724.21
make as approved by EIC.
Nirali SS Sink with side Board : Model : Elegance
3.73 1.00 Nos 9075.92 7615.60
Small: 915 x 460 mm
Nirali SS Sink with side Board : Model :Grace Plain
3.74 1.00 Nos 6359.50 5336.26
Big: 535 x 460 mm
Nirali SS Sink with side Board : Model :Grace Plain
3.75 1.00 Nos 7858.53 6594.09
Large: 610 x 460 mm
3.76 Cera Handicap Hand Rail 40mm dia 1.00 Nos 6359.50 5336.26
3.77 Supply & Installation of Decorative Wall Paper. 1.00 M2 1499.03 1257.83
3.78 Supply & Installation of Decorative Films on glass. 1.00 M2 863.08 724.21
3.79 Supply & Installation of Star Lock 1.00 Nos 158.99 133.41
3.80 Supply & Installation of Door stopper brass . 1.00 Nos 181.70 152.46
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Supply & Installation of Godrej or equivalent Rim
3.81 1.00 Nos 181.70 152.46
Lock.
Supply & Installation of SS Safety Chain for Safety
3.82 1.00 Nos 90.85 76.23
Door.
3.83 Supply & Installation of Brass Keyhole Big. 1.00 Nos 90.85 76.23
Supply & Installation of Safety Door With SS Grill,
Single shutter,both side laminated( 1mm thick)
with teak wood patti on 4 sides with french polish,
38mm thick blockboard , Godrej brand night latch
3.84 as approved by EIC, SS handles, hardware etc as 1.00 Nos 16353.00 13721.80
per detailed drawings etc. complete.with handle of
600mm high upto1200 x 2100 safety door in one or
two flaps.

Laying POP for Floor protection & later Removing &

3.85 1.00 M2 122.65 102.91
Cleaning, Complete.
Supply & Installation of aluminium frame Louvers
3.86 with 20 micron Anodize, 6mm clear opaque glass, 1.00 M2 1817.00 1524.64
with all fittings & silicon sealant & ETC, Complete. .

Supply & Installation of aluminium sliding windows

2/3Track with 20 micron Anodized, 6mm clear
3.87 1.00 M2 3361.45 2820.59
glass, Star lock, & silicon sealant ETC, Complete.
(Medium with minimum 25 mm Sections).

Supply & Installation of aluminium sliding windows

4/5Track with 20 micron Anodized, 6mm clear
3.88 1.00 M2 3724.85 3125.52
glass, Star lock, ETC & silicon sealant,
Complete.(Medium with minimum 25 mm Sections).
Supply & installation of Laquered Finished Paver
Blocks 80mm thickness LAYING AND LEVELLING OF
THE GRIT POWDER UPTO 1.5” TO 2.0” THICK FIXING
3.89 OF THE PAVER BLOCK AFTER THE LEVELLING OF 1.00 M2 1635.30 1372.18
THE GRIT POWDER (Medium with minimum 25 mm
Sections).

Supply & installation of chequered Finished tiles of

30mm approved make and approved sample in
pattern as per detailed drawings up to 25mm thick
3.90 bed of 1:4 cement mortar including surface 1.00 M2 1090.20 914.79
preparation, giving necessary slopes, cleaning
joints etc, complete.

Supply & Installation of approved make & approved

3.91 1.00 Nos 999.35 838.55
Brand foot Light.
Single line diagram for Residential flats interior
3.92
fitouts:
3.93 1bedroom hall kitchen 1.00 Nos 4542.50 3811.61
3.94 2bedroom hall kitchen 1.00 Nos 7722.25 6479.74
3.95 3bedroom hall kitchen 1.00 Nos 9539.25 8004.38
Cockroches, ants, black, silver fish, Firebrats in non
3.96 food handling areas, i. e. office space & 1.00 EA 31797.50 26681.28
surrounding areas (quarterly)
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Cockroches, ants, black, silver fish, Firebrats in non
3.97 food handling areas, i. e. canmteen, pantry rooms, 1.00 EA 6359.50 5336.26
dining hall (Monthly)
Comprehensive mosquito management Fortnightly :
3.98 1.00 EA 6086.95 5107.56
Office Premises.
Fortnightly services for building & surrounding
3.99 1.00 EA 3634.00 3049.29
premises for rodent control, Fortnightly
Cockroches, ants, black, silver fish, Firebrats(Per
4.00 1.00 EA 1135.63 952.90
Treatment) For Residential Flat 1 BHK.

Cockroches, ants, black, silver fish, Firebrats(Per

4.01 1.00 EA 1226.48 1029.14
Treatment) For Residential Flat 2 BHK.

Cockroches, ants, black, silver fish, Firebrats(Per

4.02 1.00 EA 1362.75 1143.48
Treatment) For Residential Flat 3 BHK.
Cockroches, ants, black, silver fish,
4.03 1.00 EA 2362.10 1982.04
Firebrats(Yearly) For Residential Flat 1 BHK.
Cockroches, ants, black, silver fish,
4.04 1.00 EA 2634.65 2210.73
Firebrats(Yearly) For Residential Flat 2 BHK.
Cockroches, ants, black, silver fish,
4.05 1.00 EA 3179.75 2668.13
Firebrats(Yearly)) For Residential Flat 3 BHK.
Comprehensive mosquito management Fortnightly :
4.06 1.00 EA 2271.25 1905.81
Colony.
Wiring for light point/ fan point/ exhaust fan
point/ call bell point/5 A point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core
cable in surface / recessed medium class PVC
4.07 1.00 EA 1771.58 1486.53
conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single
core cable etc as required.
Wiring for twin control light point/ fan point/ call
bell point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /
4.08 recessed medium class PVC conduit, with modular 1.00 EA 1771.58 1486.53
switch, modular plate, suitable GI box and earthing
the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.
Wiring for 15 A point with 2.5 sq.mm FRLS PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit, with
4.09 modular switch, modular plate, suitable GI box and 1.00 EA 1521.74 1276.89
earthing the point with 1.5 sq.mm. FRLS PVC
insulated copper conductor single core cable etc as
required.
Wiring for light/ power plug with 2X4 sq. mm FRLS
PVC insulated copper conductor single core cable in
surface/ recessed medium class PVC conduit
4.10 1.00 M 883.06 740.98
alongwith 1 No 4 sq. mm FRLS PVC insulated copper
conductor single core cable for loop earthing as
required.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Wiring for light/ power plug with 4X4 sq. mm FRLS
PVC insulated copper conductor single core cable in
surface/ recessed medium class PVC conduit
4.11 1.00 M 363.40 304.93
alongwith 2 No 4 sq. mm FRLS PVC insulated copper
conductor single core cable for loop earthing as
required.
Wiring for Circuit/ sub-main wiring along with
earth wire with the following sizes of FRLS PVC
4.12 insulated copper conductor single core cable in
surface/ recessed medium class PVC conduit as
required.
4.13 2 X 1.5 Sqmm + 1X 1.5 Sqmm Earth wire 1.00 M 109.02 91.48
4.14 2 X 2.5 Sqmm + 1X 2.5 Sqmm Earth wire 1.00 M 134.46 112.82
4.15 2 X 4 Sqmm + 1X 4 Sqmm Earth wire 1.00 M 166.26 139.50
Supplying & drawing following sizes of FRLS PVC
4.16 insulated copper conductor single core cable in
surface/ recessed medium class PVC conduit.
4.17 1 X 1.5 Sqmm 1.00 M 63.60 53.36
4.18 2 X 1.5 Sqmm 1.00 M 81.77 68.61
4.19 2 X 2.5 Sqmm 1.00 M 99.94 83.86
4.20 2 X 4 Sqmm 1.00 M 136.28 114.35
Supplying and drawing FRLS PVC insulated annealed
copper conductor, unarmored telephone cable in
4.21
the existing surface/ recessed steel/ PVC conduit
as required.
4.22 2 pair 1.00 M 18.17 15.25
4.23 4 pair 1.00 M 31.80 26.68
Supplying and drawing co-axial TV cable RG-6
grade, 0.7 mm solid copper conductor PE insulated,
4.24 shielded with fine tinned copper braid and 1.00 M 29.07 24.39
protected with PVC sheath in the existing surface/
recessed steel/ PVC conduit as required.

Supplying & fixing following sizes of medium class

PVC conduits along with accessories in surface/
4.25
recessed including cutting the wall and making
good in case of recessed conduit as required.
4.26 20mm 1.00 M 54.51 45.74
4.27 25mm 1.00 M 86.31 72.42
Supplying & fixing following modular switch/ socket
4.28 on existing modular plate/ switch box including
connections.
4.29 5/6 amps switch 1.00 EA 104.48 87.67
4.30 2 way 5/6 amps switch 1.00 EA 122.65 102.91
4.31 15/16 amps switch 1.00 EA 158.99 133.41
4.32 3 pin 5/6 amp socket outlet 1.00 EA 163.53 137.22
4.33 5 pin 15/16 amp socket outlet 1.00 EA 227.13 190.58
4.34 TV Socket outlet 1.00 EA 181.70 152.46
4.35 Telephone socket outlet 1.00 EA 136.28 114.35
4.36 Blanking plate 1.00 EA 45.43 38.12
4.37 Bell push 1.00 EA 208.96 175.33
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Supplying & fixing following size/ module GI box
4.38 along with modular base and cover plate for
modular switches in recess etc as required.
4.39 1 or 2 Module 1.00 EA 227.13 190.58
4.40 3 Module 1.00 EA 227.13 190.58
4.41 4 Module 1.00 EA 272.55 228.70
4.42 6 Module 1.00 EA 390.66 327.80
4.43 8 Module 1.00 EA 431.54 362.10
Supplying and fixing stepped type electronic fan
regulator of modular type on the existing modular
4.44 1.00 EA 454.25 381.16
plate including connections as per specification and
direction of Engineer-In-Charge.
Supplying and fixing Ding Dong call Bell suitable for
4.45 1.00 EA 272.55 228.70
single phase 230 volts.
Supplying and fixing of following ways surface/
recess mounting vertical type, 415 volts, TPN MCB
distribution board of sheet steel, dust protected,
4.46 duly powder coated, inclusive of 200 amps tinned
copper bus bar, common neutral link, earth bar,
din bar for mounting MCB's (but without MCB's and
incomer) as required.
4.47 4 way (4+12), double door 1.00 EA 3634.00 3049.29
Supplying and fixing 5 amps to 32 amps rating,
240/415 volts. "C" curve, miniature circuit breaker
4.48 suitable for inductive load of following poles in the
existing MCB DB complete with connectiones,
testing and commissioning etc. as required.
4.49 Single pole 1.00 EA 227.13 190.58
4.50 Double pole 1.00 EA 726.80 609.86
4.51 Triple pole and neutral 1.00 EA 1635.30 1372.18
Supplying and fixing following rating, four pole. (
Three phase and neautral ), 415 volts, residual
current circuit breaker ( RCCB ), having a
4.52
sensitivity current upto 300 milliamperes in the
existing MCB DB complete with connections, testing
and commissioning etc. as required.
4.53 40 amps 1.00 EA 3179.75 2668.13
Supplying and fixing following rating, double pole. (
One phase and neautral ), 240 volts, residual
current circuit breaker ( RCCB ), having a
4.54
sensitivity current upto 300 milliamperes in the
existing MCB DB complete with connections, testing
and commissioning etc. as required.
4.55 40 amps 1.00 EA 2739.13 2298.40
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Supplying and fixing 20 amps, 240 volts, SPN
industrial type, socket outlet with 2 pole and earth
metal enclosed plug top along with 20 amps C curve
4.56 SP MCB in sheet steel enclosure on surface or in 1.00 EA 1135.63 952.90
recess with chained metal cover for the socket
outlet and complete with connections, testing and
commissioning etc as required.
Supplying and Fixing following fittings of approved
4.57
make and specifications.
4' long T5 Tube light fitting of Philips model Aspire
4.58 including 1x TMS 097X TL5-28W lamp/ Crompton 1.00 EA 817.65 686.09
greaves Cat No. T5GP28EBS9 with 1X28W T5 lamp.

2' long T5 Tube light fitting of Philips model Aspire

4.59 including 1x TMS 097X TL5-14W lamp/ Crompton 1.00 EA 772.23 647.97
greaves Cat No. T5JB13114EB9 with 1X14W T5 lamp.

Supply & Installation of LED Down lights Concealed

4.60
Fittings or surface light of following specifications:
6W LED down light of any colour( size min.
4.61 1.00 EA 817.65 686.09
75mmX75mm)
8W LED down light of any colour ( size min.
4.62 1.00 EA 908.50 762.32
100mmX100mm)
15W LED down light of any colour ( size min.
4.63 1.00 EA 1090.20 914.79
150mmX150mm)
18W LED down light of any colour ( size min.
4.64 1.00 EA 1317.33 1105.37
150mmX150mm)
4.65 Supply and Installation of 10 W LED bulbs 1.00 EA 545.10 457.39
Supply & Installation of LED Mirror surface light of
4.66
following specifications:
4.67 18 W LED 30cm length of Syska or equivalent make 1.00 EA 2907.20 2439.43

4.68 30 W LED 60cm length of Syska or equivalent make 1.00 EA 3588.58 3011.17
Supply & Installation of LED panel concealed lights
4.69
of following specifications:
4.70 24 W LED panel light of 300mmX 300mm 1.00 EA 3179.75 2668.13
4.71 36 W LED panel light of 600mmX 600mm 1.00 EA 3634.00 3049.29
Supply & Installation of LED(aluminium base) tube
4.72
lights with fitting of following specifications:
4.73 18W with 1800 lumens of 1200mm length 1.00 EA 688.64 577.84
4.74 9W with 1020 lumens of 600mm length 1.00 EA 563.27 472.64
Supplying and fixing Ceiling fan of approved make
4.75 including making electrical comnnections etc
complete in all respects.
4.76 24" sweep (600mm) 1.00 EA 1998.70 1677.11
4.77 48" sweep (1200mm) 1.00 EA 2752.76 2309.84
Supplying and fixing Exhaust fan of approved make
including dismantling of defective fan, making
4.78
electrical comnnections etc complete in all
respects.
4.79 300mm dia 1.00 EA 1998.70 1677.11
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
4.80 150mm dia 1.00 EA 1362.75 1143.48
Supplying & fixing new approved make Geyser of
PVC outer body and SS inner tank, thermostat for
4.81 auto cut off arrangement, pressure release valve,
neon indicator etc including making all
connections, checking etc complete.
4.82 Storage type - Horizontal 15 ltrs 1.00 EA 11810.50 9910.19
4.83 Instant type - 1ltr - 4.5 KW 1.00 EA 3634.00 3049.29
Supply & Installation of External Door Closer
compact model, with ajustable spring screw,
4.84 Powder coated in any shape or colour , with all 1.00 Nos 681.38 571.74
fittings required including Door Rubber stopper,
Complete as may be directed by EIC.
Supply & Installation of Floor Spring Type Door
Closer compact model, with S.S. Plate at top to
flush the floor, All cuttting & fitting in
Marble/Granite/Vitrified/Cement or any other type
4.85 1.00 Nos 1998.70 1677.11
of floor, including S.S. screws & Etc with all fittings
required.Complete as may be directed by EIC. This
item includes EPDM rubber if required. No
deductions for EPDM rubber if not required.
EARTHING WITH BARE GI WIRE: Earthing with bare
10/12 SWG GI wire, providing and connecting
equipments with earth bus bar including supply and
fixing of bare GI wire of following size sand making
4.86 connection with equipment by means of GI 1.00 M 14.65 12.29
bolts,nuts,washers,copper lug setc.all complete
with labour and materials as per direction of
Engineer-in-Charge.

4.87 SALT AND CHARCOAL FOR PIPE EARTHING: 64 kg charcoal1.00

and 5 kg salt
SET 658.49 552.54
4.88 SALT AND CHARCOAL FOR PIPE EARTHING:160 kg coke and 5 kg salt SET
1.00 1619.73 1359.11
GI LOOP EARTHING WIRE IN HOUSE
WIRING:Providing and fixing 6 SWG GI wire on
4.89 surface or in recess for loop earthing along with 1.00 M 26.87 22.55
existing surface/recess conduit / submain wiring /
cable etc. as required.
CU LOOP EARTHING WIRE IN HOUSE
WIRING:Providing and fixing 4 SWG GI wire on
4.90 surface or in recess for loop earthing along with 1.00 M 72.92 61.18
existing surface/recess conduit / submain wiring /
cable etc. as required.
PROVIDE SHOCK HAZARD CHART: Supplyand
installation of shock hazard chart as per IE Rules
1956(Clause-44) complete with frame and glass
4.91 including necessary clamps,bolts,rawl 1.00 EA 164.64 138.15
plugs,etc.breach king and making good the wall if
required.All complete with labour and materials .
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6

PROVIDE CAUTION BOARD AT SUB-STATION: Supply

and installation of "Caution Boards" at sub-stations
4.92 as per IS 2551/upto date including supply of 1.00 EA 149.91 125.79
necessary clamps,nuts,bolt sand other hardware.All
complete with labour and materials as per the
direction of the Engineer-in-Charge
FIRE BUCKETS: Supply of Galvanised Fire buckets of
9 litre capacity, painted white inside and red
4.93 1.00 EA 1022.06 857.61
outside with letters 'fire' in black, conforming to IS
2546-1974.
FIRE BUCKET STAND: Supplying Fire bucket stand- 4
buckets hanging arrangement 1 meter height, made
4.94 1.00 EA 2417.52 2028.54
of 50x50x6mm angle frame, painted with 2 coats of
primer and 2 coats of Red, synthetic enamel paint.

RUBBER MAT UPTO 33KV: Supply and laying of 12

mm thick rubber floor mats suitable for working on
equipments upto 33KV working voltage required for
4.95 maintenance of electrical equipment in required 1.00 EA 699.09 586.61
sizes including cutting to shape and size.All
complete with labour and materials as per the
direction of Engineer-in-charge

NUMBERING OF FITTING AND FIXTURES: Numbering

4.96 of ceiling fan,exhaust fan and flourescent fittings 1.00 EA 22.71 19.06
as required in Flats/GH/Transit accomodations. No
separate payment for Transportation
NUMBERING OF FITTING AND FIXTURES :Numbering
4.97 of ceiling fan,exhaust fan and flourescent fittings 1.00 EA 13.63 11.43
at office as required.
ITC OF EXHAUST FAN : Installation,testing and
commissioning of exhaust fans of following sweeps
including making the hole to suit the size of the
4.98
above fan,making good the damage,connections,
testing, commissioning etc. as required.

4.99 Exhaust fan upto 450 mm sweep 1.00 EA 626.00 525.28

5.00 Exhaust fan more then 450 mm but upto 510 mm sweep 1.00 EA 753.43 632.20
REPAINTING OF CEILING FAN : Repainting of ceiling
fan in installed position with one or more coats of
spray painting with synthetic enamel paint of
approved brand and manufacture to give an even
5.01 1.00 EA 278.72 233.87
shade,including cleaning of surface with detergent
etc.asrequired.Make: Asian Paints, ICI Dulex and
Berger.

INSTALLATION OF WALL MONTED FAN: Fixing of wall

monted fan completed with lead in wires and other
5.02 accessories all complete with labour and materials 1.00 EA 180.79 151.70
as per direction of the Engineer-in-Charge. (cost of
Fans shall be excluded)
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
FILTRATION OF TRANSFORMER OIL: Filtration of
transformer oil by streamline filter machine
provided by the contractor for improving the
insulation strength of oil to the required strength
as per pacification given below (excluding the
5.03 supply of oil.a)Filtration of transformer oil till 1.00 litre 8.75 7.34
desired bdv is attained as per is.b) Topping up of
oil.c)Releasing al l the air from air release
plug&bucholz relay.d)To and fro transportation of
filter machine and equipments.

TRANSFORMER CLEANING : Cleaning of transformer

includes surface cleaning.cleaning of accumulated
sticky oil and other dust,oil fins.Job includes
opening of LT duct & HT terminal box,cleaning of
duct and terminal box,tightening of nuts & bolts
5.04 wher ever is required.Job to be completed with all 1.00 EA 763.60 640.74
men,materials and equipments like tools & tackles
as per direction and satisfaction of the Engineer-in-
Charge.All cleaning materials such as markin
cloth,cotton waste etc. shall be supplied by the
Contractor.

REWIINDING OF FANS : Rewinding of

ceiling/pedestal/exhaust/aircirculatorfansofalltypes
/sizes/make including 1-phase and 3-phase type
exhaust fans max.up to 2.2KW capacity and supply
of super enamel winding wire(Devi Dayal make,ISI
marked insulation materials required).This also
includes replacement of single/double bearing
SKFmake/bushes(asperoriginalmake) and
overhauling of fan and all jobs related to complete
this work in totality. This also includes removal of
fans from site,installation and commissioning after
5.05 testing of rewound fans and replacement of
condenser,if required.This also includes
transportation from site after dismantling to
Contractor’s workshop and back to
site.Note:Contractor has to give guarantee for
rewinding of above items for a period of six months
and if winding is burnt again within six months of
working of fans,it has to be rewound again free of
cost of Contractor.The burnt winding shall be kept
by Contractor.

5.06 Ceiling/pedestal fans 1.00 EA 569.84 478.15

5.07 Exhaust/air circulators fans. 1.00 EA 802.95 673.76
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6

OVERHAULING OF EXHAUST/AIR CIRCULATOR

FANS/CEILING FAN/PEDESTAL FANS: Overhauling of
exhaust/air circulator fans of various
types/Ceinling Fans/Pedestral Fans /sizes makes
5.08 and its bearings including removal from 1.00 EA 350.68 294.26
site,cleaning,greasing after degreasing,assembling
and fixing in position,testing and commissioning
including transportation from site to work place
and back all complete with labour and materials as
per directions of Engineer-in-Charge.

5.09 Excluding the cost of bearings(Bearings if necessary 1.00 EA 348.86 292.73

will be supplied by Owner free of cost).
5.10 Including supply and fixing of bearings of SKFmake(2Nos. bearings)
5.11
CLEANING OF LIGHT FITTING FIXTURES: Cleaning of
below given fitting fixtures along with perfex
cover(wherever applicable) with the help of surf
powder.It includes the removal of perfex
cover,washing the lighting fixture with
5.12 powder,cleaning with fresh water and clothes and
refixingin the same position.It also includes
arranging ladderas and wherever required,providing
scaffolding at all heights with necessary tools &
tackles.All complete with labour and materials as
per directions of the Engineer-in-Charge.

5.13 Street light fitting 1.00 EA 56.89 47.74

5.14 Tube light fitting/ceiling/exhaust fan/fan at any height inside
1.00 a building.
EA 45.51 38.18

5.15 MLL/HPMV/HPSVlampofFLP/increasedsafety/weathe 1.00 EA 56.89 47.74

r proof or any other similar fittings upto 250W

EARTH RESISTANCE MEASUREMENT: Measurement of

earthing resistance in the office building including
transportation of earthing electrodes,cables
etc,drawing the same into the ground at different
5.16 points for measuring the earth resistance.The job 1.00 EA 109.02 91.48
includes the supply of connecting leads,clamps
etc.All complete with labour and materials as per
drawings,specifications and directions of the
Engineer-in-Charge.Measuring equipments to be
supplied by contractor

PUTTY APPLICATION: Application o PVC putty/M-

seal putty on lighting
5.17 fixtures/Jn.Boxes/glands/switch boards etc.to 1.00 EA 45.43 38.12
avoid entering water/insects/any other type of
things as per direction of the Engineer-in-
Charge.NOTE: Rate is including the supply of putty.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
PLUMBING COMPLAINTS: Attending complaint of
plumbing jobs within the 20 Km from the ERO e.g.
arresting of leaks in pipelines ,problems in water
pipelines AC(windows/split), water taps leaking,
5.18 any type of leakage in bathroom/toilets/inside 1.00 EA 681.38 571.74
building/Flats on immediate basis. Parts supplied
will be paid separately .Complaints to be attended
maximum period of 12 hour from the time of
receipt of complaint.

ELECTRICAL COMPLAINTS: Attending any types of

electrical complaints WITHIN 20 Km from the ERO
like spark in electrical system,Switch/switch
boards/Minor electric problem problem in DG set
sytem,Fire Engines,Water Pump/EB Panel/DB /hand
lamps,flood lights,exhaust fans,halogen
fittings,smoking booth and complaints of
ceiling/exhaust/wall
mounted/pedestal/aircirculators/any other type of
5.19 1.00 EA 590.53 495.51
fans of various sizes/makes including replacement
of condensor,regulators etc.All complete with
labour and materials as per directions of the
Engineer-in-Charge.NOTE:Condensor and regulators
will be paid saperately ,consumables like PVC
tape,cleaning cloth, CTC etc. are to be supplied by
Contractor.Complaints to be attended maximum
period of 12 hour from the time of receipt of
complaint.

PROVIDE FIRST-AID BOXES: Supply and fixing of First-

Aid boxes as per IE Rules,1956
5.20 Clause43(2),including necessary clamps,bolts,rawl 1.00 EA 605.97 508.47
plugs,etc.breach king and making good the walls if
required.All complete with labour and materials as
per the direction of Engineer-in-Charge
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6

Supplying and fixing of 4.5kg CO2 fire extinguisher

of approved make Conforming to IS 15683, portable
high pressure type. Body seamless Manganese
Steel, ISI marked conforming to IS 7285, discharge
valve conforming to IS 324,polyethylene flat
discharge horn with diffuser,1m wire braded rubber
hose, powder coated wall mounting mild steel
bracket,stainless steel safety pin of SS 316 grade,
5.21 CO2 gas with 99.5% purity. Extinguisher shall have 1.00 EA 4603.37 3862.69
anti corrosive treatment of phosphating by hot
dipping process to thickness not less than 0.012mm
both internally and externally. Epoxy polyester
powder coating of minimum 50 micron to all
metallic external parts with two bands of yellow
colored fluorescent adhesive tape of minimum
20mm thickness of body. Finish of the paint to be
PO red as per shade 538 of IS:5
Supplying and fixing of 9kg DCP portable,cartridge
type Fire extinguisher of approved
make,Conforming to IS15683:2006,Body Carbon
Steel as per IS:513,EDD grade with no vertical weld
joint on the body Neck ring of seamless mild steel
tube conforming to IS 1239 part-1, Valve assembly
conforming to SS 316 grade or forged brass as per IS
6912 grade FLB, Inlet and outlet siphon tubes of SS
316 grade or of brass as per IS 407, Discharge
nozzle of SS 316 grade of forged brass as per IS
6912, 500mm long discharge hose of EDPM rubber,
powder coated wall mounting mild steel
bracket,stainless steel safety Pin of SS 316 grade,
5.22 Dry Chemical powder ( potassium bi-carbonate & 1.00 EA 3840.23 3222.34
Minimum 90% of the total chemical), ISI marked
CO2 Gas cartridge of 200 gms, dia of the body
175mm +/- 10mm & overall height less than
650mm.Extinguisher shall have anticorrosive
treatment of phosphating by hot dipping process to
thickness not less than 0.012mm both internally &
externally. Epoxy polyester powder coating of
minimum 50 micron to all metallic external parts
with two bands of yellow colored fluorescent
adhesive tape of minimum 20mm thickness of
body.Finish of the paint to be PO red as per shade
538 of IS:5

5.23 DISMANTLING Dismantling of following electrical

fittings / fixtures with all leads and lifts.
Electrical cables of all sizes from under / above
5.24 1.00 M 18.17 15.25
ground position
5.25 5 to 15A switches/MCBs/plugs 1.00 EA 90.85 76.23
5.26 32/63/100A DP/TPN switches/ MCCBs /MCBs 1.00 EA 90.85 76.23
5.27 Fluorescent tube light fittings of all sizes 1.00 EA 54.51 45.74
5.28 Starters (all types ) of power pumps 1.00 EA 109.02 91.48
5.29 Power pump up to 5 HP 1.00 EA 4451.65 3735.38
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
5.30 Power pump above 5 HP up to25 HP HP 1.00 EA 7722.25 6479.74
Providing and fixing Rectangular shape 1500x450
mm beveled edge mirror of superior glass (of
5.31 approved quality) complete with 6 mm thick hard 1.00 EA 1367.29 1147.30
board ground fixed to wooden cleats with C.P.
brass screws and washers complete
Supply and Fixing of curtain rod stainless steel at
5.32 proper height above door/windows with all 1.00 M 317.98 266.81
accessories
Dismantling roofing including ridges, hips valleys &
5.33 gutters, False ceiling of any type and stacking the
material within premises, of:
i) G.S. Sheet/ Klippon galvalume sheet/ False
5.34 1.00 M2 68.14 57.17
ceiling panels
5.35 ii) Asbestos sheet 1.00 M2 31.80 26.68
Demolishing mud phaska in terracing and disposal
5.36 1.00 M3 354.32 297.31
of material within 50 metres lead.
Lettering with paint of approved colour and brand
5.37 (unit/letter/cm ht).Make: Asian Paints, ICI Dulex 1.00 EA 3.63 3.05
and Berger.
Dismantling of MS IRON switch boards from inside
the wall and disposing off the material to an
5.38 1.00 EA 136.28 114.35
unobjectionable place as directed by Engineer-In-
Incharge.
Supply & Fixing of Jali for wash room as per
5.39 1.00 EA 181.70 152.46
approved make
5.40 1.00 EA 999.35 838.55
Supply & Fixing of AC starter as per approved make
5.41 Supply & Fixing of bell push switch 1.00 EA 249.84 209.64
5.42 Supply and Fixing of 0.5/1watt LED bulb 1.00 EA 136.28 114.35
5.43 Supply and fixing of decorative SS reading lamp 1.00 EA 2725.50 2286.97
5.44 Modular Wall bracket with light fittings 1.00 EA 2271.25 1905.81

Cleaning of Flats : jobs includes cleaning/washing

& removing of dirt/dust from surface of floor &
wall tiles/mosaic /Door/Almirah/windows/kitchen
cabinet/all electrical equipments
5.45 (bulbs/tubelights/Ceiling Fan/Exhaust Fan/wall 1.00 M2 295.26 247.75
monted fan etc) and other accessories items. Cloth,
soap,surf and cleaning equipments sweeper etc will
be supplied.Complete in all respect. Complete
satisfaction of engineer In charge.Garbage to be
disposed off in unobjectioneable place.

5.46 Supply & fixing of rubber pipe for AC drain water of 1.00 M 113.56 95.29
dia 15mm/20mm.complete in all respect.
Supply & fixing wooden name plate with
5.47 1.00 EA 1589.88 1334.06
name/Designation for officer as per standard size
Supply & fixing brass name plate with name &
5.48 designation/Department Name plate as per 1.00 EA 2725.50 2286.97
standard size
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Providing & fixing Aluminium Grills of approved
5.49 pattern on windows etc complete in all respects 1.00 M2 1271.90 1067.25
and satisfacation of engineer in charge.

5.50 Supply & Fixing of mosquito teflon net with sticker 1.00 M2 1090.20 914.79
in windows/doors complete in all respect.

Supply & Fixing of teflon mosquito net/screen

5.51 1.00 EA 3951.98 3316.10
door, hinge type with proper locking system in
polished wooden frame . complete in all respect.
5.52 EARTHING WITH 100MMDIA, 3. M LONG CI PIPE 1.00 EA 7708.35 6468.08
5.53 EARTHING WITH 32 X 6 MM G.I.STRIP 1.00 M 117.83 98.87
5.54 EARTHING WITH 50 X 6 MM G.I. STRIP 1.00 M 171.89 144.23
5.55 EARTHING WITH 80MM DIA, 3.0 M LONG GI PIPE 1.00 EA 7224.03 6061.68
5.56 CONCERTINA COIL FENCING 1.00 M 290.81 244.02
Painting of External surface including color coding
of Mild Steel above ground Pipeline & Fittings such
as valves, flanges etc. as per the attached
technical specification and direction of Site
engineer.
Surface preparation - Hand Tool Cleaning (SSPC SP-
5.57 2). 1.00 M 345.23 289.68
Primer - One Coat Mastic Coating (P4) (175µm)
FinishPaint - Two Aliaphatic Polyerethane Finish
(F1) (40-45 µm each)
The items include supply of paints and other
required meterial, scafolding, labours, tools and
tacles etc. 400 m dia pipe.Make: Asian Paints, ICI
Dulex and Berger.
Painting of External surface including color coding
of Mild Steel above ground Pipeline & Fittings such
as valves, flanges etc. as per the attached
technical specification and direction of Site
engineer.
Surface preparation - Hand Tool Cleaning (SSPC SP-
5.58 2). 1.00 M 300.71 252.33
Primer - One Coat Mastic Coating (P4) (175µm)
FinishPaint - Two Aliaphatic Polyerethane Finish
(F1) (40-45 µm each)
The items include supply of paints and other
required meterial, scafolding, labours, tools and
tacles etc. 350 m dia pipe.Make: Asian Paints, ICI
Dulex and Berger.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6
Painting of External surface including color coding
of Mild Steel above ground Pipeline & Fittings such
as valves, flanges etc. as per the attached
technical specification and direction of Site
engineer.
Surface preparation - Hand Tool Cleaning (SSPC SP-
5.59 2). 1.00 M 257.11 215.74
Primer - One Coat Mastic Coating (P4) (175µm)
FinishPaint - Two Aliaphatic Polyerethane Finish
(F1) (40-45 µm each)
The items include supply of paints and other
required meterial, scafolding, labours, tools and
tacles etc. 300 m dia Pipe.Make: Asian Paints, ICI
Dulex and Berger.
Painting of External surface including color coding
of Mild Steel above ground Pipeline & Fittings such
as valves, flanges etc. as per the attached
technical specification and direction of Site
engineer.
Surface preparation - Hand Tool Cleaning (SSPC SP-
5.60 2). 1.00 M 172.62 144.84
Primer - One Coat Mastic Coating (P4) (175µm)
FinishPaint - Two Aliaphatic Polyerethane Finish
(F1) (40-45 µm each)
The items include supply of paints and other
required meterial, scafolding, labours, tools and
tacles etc. 200 m dia pipe.Make: Asian Paints, ICI
Dulex and Berger.
Painting of External surface including color coding
of Mild Steel above ground Pipeline & Fittings such
as valves, flanges etc. as per the attached
technical specification and direction of Site
engineer.
Surface preparation - Hand Tool Cleaning (SSPC SP-
5.61 2). 1.00 M 128.10 107.49
Primer - One Coat Mastic Coating (P4) (175µm)
FinishPaint - Two Aliaphatic Polyerethane Finish
(F1) (40-45 µm each)
The items include supply of paints and other
required meterial, scafolding, labours, tools and
tacles etc. 150 m dia pipe.Make: Asian Paints, ICI
Dulex and Berger.
 Revised
Estimated Rate Revised L-1 Rate on
on account of account of GST
Sl. GST implication implication w.e.f.
Item Description Quantity Units
No. w.e.f. 01.07.2017 (16.09%
01.07.2017 Less than Revised
(Rs.) Estimated Rate) (Rs.)

1 2 3 4 5 6

Providing and fixing double scaffolding system (cup

lock type) on the exterior side, up to seven story
height made with 40 mm dia M.S. tube 1.5 m
centre to centre, horizontal & vertical tubes
joining with cup & lock system with M.S. tubes,
M.S. tube challies, M.S. clamps and M.S. staircase
system in the scaffolding for working platform etc.
and maintaining it in a serviceable condition for
the required duration as approved and removing it
5.62 1 M2 164.44 137.98
there after .The scaffolding system shall be
stiffened with bracings, runners, connection with
the building etc wherever required for inspection
of work at required locations with essential safety
features for the workmen etc. complete as per
directions and approval of Engineer- in-charge .The
elevational area of the scaffolding shall be
measured for payment purpose .The payment will
be made once irrespective of duration of
scaffolding.