Scribd
Upload
257 views1 page

Declaration

This document provides a declaration of performance for retaining wall elements made by Creagh Concrete Products Ltd. It includes (1) the unique product identification code, (2) the product type, (3) the intended use as an element in building structures, (4) the manufacturer name and contact information, (5) the assessment and verification system used, and (6) the declared performance including concrete strength and reinforcement properties. It confirms that the product performance is in conformity with the declaration.

Uploaded by

acko80
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
257 views1 page

Declaration

This document provides a declaration of performance for retaining wall elements made by Creagh Concrete Products Ltd. It includes (1) the unique product identification code, (2) the product type, (3) the intended use as an element in building structures, (4) the manufacturer name and contact information, (5) the assessment and verification system used, and (6) the declared performance including concrete strength and reinforcement properties. It confirms that the product performance is in conformity with the declaration.

Uploaded by

acko80
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Declaration of Performance

133 – CPR – 00155


(1) Unique Identification Code of the Product Type:
Retaining Walls
(2) Type, batch or serial number or any other elements allowing identification of the construction product as
required under article 11 (4) CPR:
Precast Concrete Products – Retaining Wall Elements
(3) Intended use or uses of the construction product in accordance with the applicable harmonized technical
specification, as foreseen by the manufacturer:
Element used in the structure of buildings
(4) Name registered trade name or registered trade mark and contact address of the manufacturer as required
under article 11 (5) of the CPR:
Creagh Concrete Products Ltd
38 Blackpark Road
Toomebridge
Co.Antrim
BT41 3SL
(5) System or systems of assessment and verification of constancy of performance of the construction products
as set out in the CPR, Annex V
System 2 + Method 1
(6) Declared performance
EN 15258: 2008

Essential Characteristics Performance Harmonised technical Specification

Concrete Compressive Strength 40N/mm2 EN 15258: 2008


Ultimate Tensile Strength of 650N/mm2 EN 15258: 2008
reinforcing steel
Tensile Yield Strength for reinforcing 500N/mm2 EN 15258: 2008
steel
Ultimate tensile strength for 1770N/mm2 EN 15258: 2008
prestressed steel
Mechanical Strength See design specification EN 15258: 2008
For geometrical data, detailing, fire See design specification EN 15258: 2008
resistance, Water vapour
permeability, airborne sound
insulation and durability

Construction Products Certification (1333) performed the initial inspection of the manufacturing plant and of factory
production control and the continuous surveillance, assessment and evaluation of the factory production control, and
issued the certificate of conformity of the factory production control

(7) The performance of the product identified in point 1 and 2 is in conformity with the declaration of
performance in point 6

The declaration of performance is issued under the sole responsibility of the manufacturer identified in point
4

Signed on behalf of the manufacturer by:

Seamus McKeague (Managing Director)


Creagh Concrete Products Ltd

You might also like