TABLE VR
Pre-assembled Slab Formwork
// Safety and high efficiency for slab construction
// Table of content Features 2
Benefits 3
Solutions 4
Basic components 7
TABLE VR Pre-assembled Slab Formwork
// Features
Perfect for projects in building construction with Timber as main beam material eases the lifting and
high demands for finishing quality, safety and relocation of the tables due to its lightness.
efficiency.
Steel as main beam material eases the design of special
Adaptable to any type of slab, solid and lightened. perimeter tables, solutions for drop beams and high
load capacity tables for thick slabs.
The system consists of main timber or steel beams and
secondary timber beams, decked with plywood and
supported on props or shoring.
Tables VR with main timber beam Tables VR with main steel beam
System components:
1 Main beam 10 5 4 6
5
2 Secondary beam
3 Head
4 Toeboard
2
5 Handrail Post SV 3
1
3
6 Tube
7 Prop 7
8 Trolley VR
9 Hook VR
10 Plywood 8 9
2
TABLE VR Pre-assembled Slab Formwork
// Benefits
Can be moved from one place to another without
dismantling, thus reducing risks during assembly and
dismantling.
Quick formwork erection, stripping and material
relocation, requires less labour: great efficiency.
Without removing the props when stripping or
relocating the tables.
Easy installation to dimension and levelling of the
VR Tables (few props).
Higher load-bearing capacity of the props by using
them in tables.
Heads VR-MK with folding system and automatic prop locking
Safe system:
Flexible system:
· Formwork erection (with plywood) and
handrails on the ground, except for infill · Tables with pre-defined dimensions or special
works at height. solutions, depending on requirements.
· Handrails attached to perimeter tables · Table support with props or shoring.
during the entire building process.
· Easy infills (plywood rests on beams projecting
· Elements remain fixed from the beginning to from tables).
end of the work: Impossibility of falls from
height. · Construction of drop beams, column heads
and other geometries in slabs.
· Easy and safe solution of cantilevers due to
the specific prop arrangement.
· Possibility of using main steel beams (Walers
DU-120 and MK-120).
· Compatible with other ULMA formwork
systems.
Safe solution for perimeter formwork Lifting and installation of tables with attached handrails
3
TABLE VR Pre-assembled Slab Formwork
// Solutions
Table VR configuration with MK
Different supports
With EP Prop With ALUPROP
With SP Prop With T-60 Shoring
4
TABLE VR Pre-assembled Slab Formwork
Infills
Between tables At walls Around columns
Perimeter solutions
Drop beams
5
TABLE VR Pre-assembled Slab Formwork
Safety items
Anti-fall railings Chain to prevent the formwork from overturning
Lifting and shifting
With crane and Hook VR With Trolley VR
With motor powered trolley With Lateral Trolley VR
6
TABLE VR Pre-assembled Slab Formwork
Basic components
kg kg kg
Timber beam VM 20/1.45 1940191 8 Head VR 2211012 15.5 Hook VR 2211030 770
Timber beam VM 20/1.9 1940172 9.5 Head VR-SP/EP 2211700 9.6 Hook VR 600/540 2211150 1450
Timber beam VM 20/2.15 1940197 10.8 Swivel head VR 2211080 20.5
Timber beam VM 20/2.45 1950129 12.3 ALUPROP head 2211095 4.5
Timber beam VM 20/2.65 1940196 13.3 Two-way U-head VM-DU 1906880 3.5
Timber beam VM 20/2.9 1940144 16.1 Head waler VR 2211310 10
Timber beam VM 20/3.3 1950130 16.5 Latch VR 2211370 2.1
Timber beam VM 20/3.6 1940146 18
Timber beam VM 20/3.9 1950112 19.5
Timber beam VM 20/4.5 1940178 22.5
Timber beam VM 20/4.9 1950113 24.5
Timber beam VM 20/5.9 1940149 29.5
Trolley VR 2211031 431
SPT truck adaptor 2211330 250
Waler MK-120/1.125 1990209 29.4
Waler MK-120/1.625 1990213 41.9
Waler MK-120/2.125 1990217 54
Waler MK-120/2.375 1990219 60
Waler MK-120/2.625 1990221 68
Waler MK-120/3.125 1990225 81 Lateral trolley VR 2211625 252
VM hanging beam support 2211670 7.4
Waler MK-120/3.625 1990229 93
VM20 hanging beam supplement 2211660 4.8
Waler MK-120/4.125 1990233 107
Hanging beam plate 60 2211360 17.4
Waler MK-120/4.625 1990237 120
Waler MK-120/4.875 1990239 126
Waler MK-120/5.625 1990245 146
VM handrail support 2211165 6.9
Chain VR 7.5 kN 2211750 6.3
Chain VR 2211035 2.9
7
ULMA C y E, S. Coop.
Ps. Otadui, 3 - P.O. 13 01FDK01
20560 Oñati, Spain
T. +34 943 034 900
F. +34 943 034 920
www.ulmaconstruction.com
IMPORTANT:
Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures reserves the right to introduce any modifications deemed necessary for the technical development of the product.
in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the All rights reserved. Neither all nor part of this document may be reproduced or transmitted in any way by any electronic or
purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in mechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval system
this document, and the data on stress and loads should be respected. ULMA’s Technical Department must be consulted anytime without the written permission.
that field changes alter our equipment installation drawings. The loads featured in this document, related to the basic elements
of the product, are approximate. Our equipment is designed to work with accessories and elements made by our company only. © Copyright by ULMA C y E, S. Coop
Combining such equipment with other systems is not only dangerous but also voids any or all our warrantees. The company
