Fastening Options

Metric

Section #3 Pictorial Table Of Contents

Introduction To Metric Fastener Tool Metric Part No. Legend Slide-In
Fasteners How To Order Fastener Standards Size Reference Definition for Icons Economy T-Nuts

Pages 712-713 Page 714 Page 715 Page 715 Page 716 Page 716 Page 717

Slide-In Double Economy T-Nut Slide-In Slide-In Economy Spring Slide-In T-Nuts
Economy T-Nuts Holding Springs Economy T-Nuts Slide-In T-Nuts T-Slot Studs T-Nuts with Ball Spring

Page 718 Page 719 Page 719 Page 720 Page 721 Page 721 Page 722

Slide-In T-Nuts Slide-In Slide-In Roll-In T-Nuts Roll-In T-Nuts Roll-In Roll-In T-Nuts
with Ball Spring T-Nuts T-Nuts with Flex Handle with Set Screw T-Nuts with Ball Spring

3
Page 722 Page 723 Page 723 Page 724 Page 725 Page 726 Page 727

Roll-In T-Nuts Roll-In T-Nuts Roll-In T-Nuts Roll-In T-Nuts Drop-In Drop-In
with Ball Spring with Ball Spring with Spring Leaf with Spring Leaf Drop-In T-Nuts T-Nuts T-Studs

Page 728 Page 728 Page 729 Pages 729-730 Page 730 Page 731 Page 732

Drop-In T-Stud with Threaded Central Cover Cap for Bolt Anchor
Flanged Hex Nut Insert Connectors Central Connectors Connectors Butt Fasteners Fasteners

Page 733 Page 733 Page 734 Page 734 Page 735 Page 736 Page 737

Double Anchor Standard Single Tab Connecting Plate Bolts Assemblies

Fasteners End Fasteners End Fasteners Screws Connectors & Components

Page 738 Pagse 739 Page 740 Page 741 Page742 Pages 743-751

Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 711

Fastening Options

Fastening Options
Metric

Introduction to Fasteners Roll-In T-Nuts with Flex Handle, Set Screw, Ball Spring or Spring Leaf load from the profile
side, allowing add-ons to your application without dismantling the frame. Roll-in T-nuts with a flex
80/20® has the largest assortment of fasteners available in the industry! We stock over 20 types, handle, ball spring, set screw or spring leaf hold the T-nut in place for easy positioning. The flex
featuring over 400 variations and combinations for your applications. 80/20 fasteners are made handle makes removal of the drop-in simple.
of high-quality materials and hold tight tolerances. Variations include fasteners that load from the
profile end or the profile side, fractional or metric, and black zinc, bright zinc or stainless steel
material.
Slide-In Economy T-Nuts: Single economy T-nuts are
available with the thread centered or offset to best fit your
application requirements. Offset T-nuts are ideal Flex Handle Ball Spring Set Screw Spring Leaf
for making clean end connections without
compromising strength. Centered T-nuts
work well for connections made in the Slide-In Economy T-Slot Studs, loaded from the end of a profile, are the
center of a profile or with a joining plate. strongest fastener available from 80/20® for use with joining plates. By
Economy T-nuts are also available in engaging the Drop-Lock feature, they provide a vibration-proof connection
double and triple configurations. when properly tightened. The square key on the shoulder of the bolt
prevents the stud from turning when an application is subjected to vibration.
Standard Slide-In T-Nuts, made of 1215
carbon steel, are high-strength, low-cost
fasteners that load from the profile end. They
can be customized up to 36 inches in length
3 for any application.
Drop-in T-Slot Studs load from the
profile end or into the profile side. If
3
Customized Lengths Available the profile ends are captivated, drop-
in fasteners can be placed directly
Drop-in T-Nut fasteners are a in the T-slot, then rotated for secure
cost-effective, modular choice placement.
for most mounting needs. If the
profile ends are captivated, Drop-
in fasteners can be placed directly
in the T-slot, then rotated for
secure placement.
Anchor Fasteners, available in single and double
Butt
configurations, are perfect for making 90˚ connections in the Fastener
End Fasteners provide a strong, center of a bar. These fasteners make a strong, flush connection
square, hidden joint in a fixed that can be easily adjusted when used with any of 80/20®’s
location that simplifies assembly. T-slotted profiles.
When ordering applications with end
fasteners, be sure to specify tapping
Anchor
and access hole machining services Fastener
for your profiles.

Self-Aligning T-Nuts have a raised section that extends up into the T-slot
opening. This feature will center the threaded hole of the T-nut in the T-slot,
prevent rotation and allow for longer thread dimensions. Note: Make certain Butt Fasteners allow you to fasten two profiles end-to-end with maximum strength and near-
the “neck” does not extend past the face of the T-slot profile, interfering with perfect alignment. When space restrictions prevent the use of joining plates, butt fasteners are
the connection. the perfect solution.

712 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 713

Fastening Options

Fastening Options
Metric

How to Order 80/20® Fasteners Fastener Standards

As you will notice in the order below, ordering fasteners from 80/20 is a simple process. Simply Assembling T-slotted profiles with 80/20®’s selection of fasteners is a simple and quick process.
write the part number and quantity required (note: when ordering bolt kits, double check the To ensure a secure connection, there are a few key points to keep in mind when placing fasteners
quantity required per the connector). To finish, just write a brief description of the fastener you are into the T-slot:
ordering. This will help us ensure that you receive the exact parts that you need.
Threaded Pilot Projection Offset Tap Hole Location

How To Order The threaded pilot projection on T-nuts The offset threaded hole on 80/20 T-nuts
Shipping Method: Ship To:
provides more thread, adding strength to the allows for a flush surface when mating two
Customer: fastener. Always position the projection down profiles at a 90º connection. This is most
Ordered By:
Address: in the T-slot to avoid crashing and an uneven common when using anchor fasteners, shown
City / State: connection. in the example below.
Complete Address & Shipping Method Attention:
Required... NO P.O. Box Tag:

Part Number Quantity Length Description / Machining Price/UOM Ext. Price

25-2525 2 469.9mm 25-7042 in A both ends $0.01 $7.89

40-4040-Lite-4m 5 4m Full length profile $80.00 $400.00
1 40-8016 4 1016.0mm 40-7029 one end $0.14 $554.74
40-8080 4 914.4mm 40-7050 style MG in W, X both ends $0.06 $230.43

3 2 CM01-051006 2 Custom bracket per drawing #1 $23.00 $46.00 3

65-2611 1 .63 sm 6mm bronze polycarb 1 @ 457.2mm x 1016mm w/ 25-7311
3 per drawing $111.95 $70.53

65-7150 1 Cut plastic panels all sides < -1220mm $10.50 $10.50
25-7042 4 25 Series anchor fastener counterbore $2.25 $9.00
25-7005 2 Cut-to-length for 25-2525 $1.95 $3.90
40-7023 4 Cut-to-length for 40-8016 $2.90 $11.60
4 40-7030 4 Cut-to-length for 40-8080 $2.60 $10.40 Fastener/Hex Tool Size Reference
40-7050 64 40 Series drill access hole $1.95 $124.80
40-7029 4 5/16-18 tap service for 40-8016 $15.20 $60.80 This chart is a quick reference when looking for the correct size of hex wrench for use with 80/20
25-7311 2 Anchor fastener notch for 25 Series $0.53 $1.06
fasteners. See pages 1015-1024 for power bits, T or L-handle wrenches, and Bondhus® tools.
40-3891 32 40 Series M8 bright zinc end fastener w/ screw $1.65 $52.80
25-2114 16 Gray T-Slot covers for 25 Series $3.45 $55.20 Fastener Head
Thread Size
40-2050 8 End caps for 40-8080 $1.85 $14.80 SHCS BHSCS FBHSCS FHSCS
5 25-3896
40-1982
4
5
25 Series anchor fasteners
40 Series M8 bright zinc double economy T-nut
$3.10
$0.84
$12.40
$4.20 8-32 N/A 3/32” N/A N/A
25-4132 12 2 hole inside corner gusset bracket $3.95 $47.40
75-3404 24 25 Series M6 BHSCS & economy T-nut $0.45 $10.80 10-32 5/32” 1/8” N/A N/A
1/4-20 3/16” 5/32” 5/32” 5/32”
TOTAL $1739.25
NOTE: Prices shown for illustration use only. 5/16-18 1/4” 3/16” 3/16” 3/16”
Contact your distributor for a personalized quote.
Special Instructions: Must be delivered for assembly by Friday!!! 3/8-16 5/16” N/A N/A 7/32”
M5 4mm 3mm N/A 3mm
M6 5mm 4mm N/A 4mm
1 - Profiles = Pages 640-694 • 2 - Custom Parts = Pages 695-710 • 3 - Panels = Pages 831-914
M8 6mm 5mm N/A 5mm
4 - Machining Services = Pages 1025-1078 • 5 - Accessories & Tools = Pages 915-938 & 1015-1024 M10 8mm 6mm N/A 6mm

714 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 715

Fastening Options

Fastening Options
Metric

Metric Fastener Part Number Definition Slide-In Economy T-Nuts

All metric fasteners have a 2-digit prefix followed by a dash, followed by a 4-digit number. • Loads from the profile end only
• Available in carbon steel, black and bright
zinc-plated
• Refer to pages 743-751 for our full screw and
bolt offering
• Refer to page 719 for T-nut holding springs

Coating Thread Size Screw Type Length (mm)

11 - Black 1 - M10 3 - BHSCS 10 - 10 mm
13 - Blue 2 - M12 5 - SHCS 12 - 12 mm
17 - Stainless 3 - M3 7 - FHSCS 16 - 16 mm
19 - Bright 4 - M4 9 - Econ T-Slot Stud 20 - 20 mm
5 - M5 25 - 25 mm
6 - M6 30 - 30 mm
8 - M8 35 - 35 mm
40 - 40 mm
3 45 - 45 mm 3
Part No. Style A B C D (Thread) Finish kg.
25-3382 Style 1 11.25 25.40 2.38 1/4-20 Centered Black Zinc .0042
Legend for Icons 25-1961 Style 1 11.25 25.40 2.38 M6 x 1.0 Centered Bright Zinc .0041
25-1941 Style 3 11.25 15.87 2.79 M4 x 0.7 Offset Bright Zinc .0037
25-1951 Style 3 11.25 15.87 2.79 M5 x 0.8 Offset Bright Zinc .0035
Design files for this part can This part can use 30-3789 Style 2 13.50 25.40 3.60 5/16-18 Centered Bright Zinc .0090
be found on the 80/20® DVD double economy T-nuts. 30-3796 Style 2 13.50 25.40 3.60 M8 x 1.25 Centered Bright Zinc .0090
(Design Software) 30-1961 Style 3 13.00 20.60 3.20 M6 x 1.0 Offset Bright Zinc .0055
See page 757 40-3286 Style 2 12.82 20.60 3.17 1/4-20 Centered Black Zinc .0054
40-1961 Style 2 12.82 28.57 3.17 M6 x 1.0 Centered Bright Zinc .0080
40-1981 Style 3 16.00 24.99 3.60 M8 x 1.25 Offset Bright Zinc .0093
40-3278 Style 3 16.00 24.99 3.60 5/16-18 Offset Black Zinc .0093

Threaded Pilot Projection

The threaded pilot projection provides more threads, adding strength
to the fastener. Always position the projection down in the T-slot to
avoid crashing and an uneven connection.

716 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 717

Fastening Options

Fastening Options
Metric

Double Slide-In Economy T-Nuts Economy T-Nut Holding Springs

• Reduces assembly time • Holds 40 Series M8 x 1.25 or 5/16-18 slide-in economy

• Loads from the profile end only T-nuts in place

• Made from steel with bright zinc finish • Snaps around the pilot projection of the T-nut

• Perfect for multiple hole joining plates • Sold in bags of 100 springs

• Refer to pages 743-751 for our full screw • Compatible with 40-1981, 40-1982 and 40-3278
and bolt offering

Part No. Compatible Series kg. (bag)

3010 40 Series & 15 Series .0453

Slide-In Economy T-Nuts

Steel, Zinc-Plated

3 • Loads only from the profile’s end 3

• Very economical

Part No. A B C D E (Thread) F Finish kg.

25-1962 47.60 11.30 25.00 11.20 M6 x 1.00 2.41 Bright Zinc .009
40-1982 75.00 17.50 40.00 16.20 M8 x 1.25 3.60 Bright Zinc .028

Threaded Pilot Projection

The threaded pilot projection provides more threads, adding strength
to the fastener. Always position the projection down in the T-slot to
avoid crashing and an uneven connection. Part No. A B C D Compatibility Code*
14159 M4 9.00 9.00 3.00 5-20
14122 M5 9.00 9.00 3.00 5-20
14124 M6 15.00 10.00 4.00 6-10, 6-25
14126 M6 19.00 16.00 4.00 8-15, 8-40, 10-45
14127 M8 19.00 16.00 4.00 8-15, 8-40, 10-45
14128 M6 19.00 19.00 4.00 10-45
14129 M8 19.00 19.00 4.00 10-45
14130 M6 20.00 13.00 5.00 8-15, 8-40, 10-45
14131 M8 20.00 13.00 5.00 8-15, 8-40, 10-45

* See Compatibility Code information on page 642.

718 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 719

Fastening Options

Fastening Options
Metric

Slide-In T-Nuts Slide-In Economy T-Slot Studs

• Loads from the profile end only • 40 Series compatible

• Made from 1215 carbon steel with bright and • Loads from the profile end only
black zinc finishes • Strongest fastener available for joining plates
• 1M Standard T-Nut profiles are available for • Square neck prevents rotation
customized T-Nuts*
• Refer to pages 743-751 for our full nut and
• Refer to pages 743-751 for our full screw and washer offering
bolt offering
• See page 1029 for cut-to-length service
Part No. Finish Thread x Length kg.
19-8920 Bright Zinc M8 x 20mm .0142
19-8925 Bright Zinc M8 x 25mm .0153
19-8930 Bright Zinc M8 x 30mm .0169
19-8935 Bright Zinc M8 x 35mm .0194
19-8945 Bright Zinc M8 x 45mm .0213
Customized Lengths Available 40-3116 Black Zinc 5/16-18 x 3/4” .0117
40-3120 Black Zinc 5/16-18 x 1” .0139
40-3126 Black Zinc 5/16-18 x 1-1/4” .0156
40-3134 Black Zinc 5/16-18 x 1-1/2” .0177
40-3290 Black Zinc 5/16-18 x 2” .0225

3 3
Spring T-Nuts
Steel, Zinc-Plated

• Loads only from the end of our 10-45 compatible

profiles
• Coil spring positions T-nut in the slot for easier
assembly

Part No. A B (Tap Location) C D E (Thread) Finish kg.

25-1954 4.34 5.08 12.45 10.95 M5 x 0.8 Bright Zinc .0045
25-1964 4.34 5.08 12.45 10.95 M6 x 1.0 Bright Zinc .0045
25-3204 4.34 5.08 12.45 10.95 1/4-20 Black Zinc .0045
25-8901* 4.34 Per Your Drawing 914.00 10.95 Per Your Drawing Black or Bright Zinc .3420
40-1964 6.35 7.14 17.45 15.90 M6 x 1.0 Bright Zinc .0090 Part No. A B C D E kg. Compatibility Code*
40-1984 6.35 7.14 17.45 15.90 M8 x 1.25 Bright Zinc .0090 13106 M4 .0050
40-3202 6.35 7.14 17.45 15.90 1/4-20 Black Zinc .0090 13107 M5 .0042
9.80 18.00 3.80 1.50 10-45
40-3203 6.35 7.14 17.45 15.90 5/16-18 Black Zinc .0090 13108 M6 .0041
40-8900* 6.35 Per Your Drawing 914.00 15.90 Per Your Drawing Black or Bright Zinc .6840 13109 M8 .0039

*Note: 80/20® can customize T-nut profiles to match your specific requirements; simply submit a sketch to 80/20® or your distributor.
* See Compatibility Code information on page 642.

720 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 721

Fastening Options

Fastening Options
Metric

Slide-In T-Nuts with Ball Spring Slide-In T-Nuts

Steel, Zinc-Plated, Self-Aligning Steel, Zinc-Plated, Self-Aligning

• Loads from the profile’s end only • Loads only from the profile’s end
• Compatible with 15 and 40 Series profiles • Works best in our 30 Series profile
• Ball spring positions the T-nut in the slot for easier • Compatible with all our 8mm slot width profiles
assembly

Part No. A B C D E F G kg. Compatibility Code* Part No. A B C D E F kg. Compatibility Code*
13050 M4 .0108 13022 M4 .0840
8-15
13051 M5 .0105 13023 M5 .0810
16.00 16.00 6.00 8.00 1.90 8-30
13052 M6 .0099 8-15 13024 M6 .0770
22.00 17.00 9.60 1.70 2.90 8.00 8-40
13053 M8 .0090 8-40 13025 M8 .0690
13054 1/4-20 .0099
3 13055 5/16-18 .0090
3

Slide-In T-Nuts with Ball Spring Slide-In T-Nuts

Steel, Zinc-Plated Steel, Zinc-Plated, Self-Aligning

• Loads from the profile’s end only • Loads only from the profile’s end
• Compatible with 15 and 40 Series profiles • Compatible with 10-45 profiles

Part No. A B C D E kg. Compatibility Code* Part No. A B C D E F kg. Compatibility Code*
13064 M5 .0164 13046 M4 .0215
8-15
13065 M6 23.00 18.00 6.80 1.70 .0160 13047 M5 .0209
8-40 20.00 19.50 10.60 9.80 5.10 10-45
13066 M8 .0150 13048 M6 .0203
13049 M8 .0186

* See Compatibility Code information on page 642. * See Compatibility Code information on page 642.

722 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 723

Fastening Options

Fastening Options
Metric

Roll-In T-Nuts with Flex Handle Roll-In T-Nuts with Set Screw

• Easy to add and reposition on an existing frame where • Easy to add and reposition on an existing frame where
T-slot ends are captivated T-slot ends are captivated
• Can be loaded from the profile end or the profile side • Can be loaded from the profile end or the profile side
• Rubber friction nub holds nut in vertical position • Set screw permanently positions the T-nut in the T-slot*
in the T-slot • Available in black and bright zinc
• This high-strength T-nut reduces assembly time and • Refer to pages 743-751 for our full screw and bolt
can be easily removed from the T-slot offering
• Refer to pages 743-751 for our full screw and bolt
offering

3 Flexible
3
Rubber
Handle

Part No. A B (Tap Location) C D E (Thread) Finish kg.

Part No. A B (Tap Location) C D E (Thread) Finish kg. 40-3310 7.23 7.87 22.22 12.95 1/4-20 Black Zinc .0122
25-1956 5.08 5.10 15.74 10.03 M5 x 0.80 Bright Zinc .0045 40-3311 7.23 7.87 22.22 12.95 5/16-18 Black Zinc .0118
25-1966 5.08 5.10 15.74 10.03 M6 x 1.00 Bright Zinc .0038 25-3312 5.08 5.10 15.74 10.03 10-32 Black Zinc .0036
25-3376 5.08 5.10 15.74 10.03 1/4-20 Black Zinc .0037 25-3313 5.08 5.10 15.74 10.03 1/4-20 Black Zinc .0036
40-1966 7.23 7.87 22.22 12.95 M6 x 1.00 Bright Zinc .0106 40-1968 7.23 7.87 22.22 12.95 M6 x 1.00 Bright Zinc .0118
40-1986 7.23 7.87 22.22 12.95 M8 x 1.25 Bright Zinc .0103 40-1988 7.23 7.87 22.22 12.95 M8 x 1.25 Bright Zinc .0113
40-3282 7.23 7.87 22.22 12.95 5/16-18 Black Zinc .0103
40-3283 7.23 7.87 22.22 12.95 1/4-20 Black Zinc .0109
*Note: An “L” wrench or a Bondhus® Combo Tool, shown on pages 1018-1019, is required for adjusting the set screw.

724 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 725

Fastening Options

Fastening Options
Metric

Roll-In T-Nuts Roll-In T-Nuts with Ball Spring

Steel, Zinc-Plated, Self-Aligning Steel & Stainless Steel, Self-Aligning

• Loads from the profile end or side • T-nut can be loaded from the profile end or side
• Easy to add to an existing frame where • Ball spring positions the T-nut in the slot for
T-slot ends are captivated easier assembly
• Use in our 20 and 40 Series profiles

3 3

Part No. Material A B C D E F G kg. Compatibility Code*

13082 M3 .0022
13083 M4 12.00 7.70 4.00 4.90 .60 1.00 .0020 5-20
13084 M5 .0018
13027 M4 .0108
13028 Steel, M5 .0105
Part No. A B C D E F kg. Compatibility Code* 13031 Zinc-Plated M6 .0099
13088 M4 .0042 13034 M8 .0090
8-15
13090 M5 .0038 13039 10-32 .0109
16.00 11.60 4.60 7.90 1.00 8-30 22.00 13.50 7.20 7.80 .80 1.70 8-40
13092 M6 .0032 13037 1/4-20 .0099
8-40
13094 M8 .0026 13040 5/16-18 .0094
13058 M5 .0130 13029 M5 .0105
Stainless
13060 M6 20.00 15.00 6.00 9.80 2.00 .0120 10-45 13032 M6 .0099
Steel
13062 M8 .0110 13035 M8 .0090

* See Compatibility Code information on page 642. * See Compatibility Code information on page 642.

726 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 727

Fastening Options

Fastening Options
Metric

Roll-In T-Nuts with Ball Spring Roll-In T-Nuts with Spring Leaf
Stainless Steel Steel, Zinc-Plated, Self-Aligning

• Loads from the profile end or side • Loads from the profile end or side
• Ball spring positions the T-nut in the slot for • Spring leaf positions the T-nut in the slot for
easier assembly easier assembly
• Use in 40 Series profiles • Compatible with 40 Series profiles

Part No. A B C D E kg. Compatibility Code*

13018 1/4-20 .0100 Part No. A B C D E F G kg. Compatibility Code*
22.00 13.70 7.00 1.70 8-15, 8-40 13030 M5 .0114
13021 5/16-18 .0091
13033 M6 .0108 8-15
13036 M8 22.00 13.50 0.80 7.80 7.20 13.00 .0099
13038 1/4-20 .0109 8-40
Roll-In T-Nuts with Ball Spring 13041 5/16-18 .0100
3 3
• 40 Series compatible
• Easy to add and reposition to existing frame where Roll-In T-Nuts with Spring Leaf
T-slot ends are captivated Steel, Zinc-Plated, Self-Aligning
• Can be loaded from the profile end or the profile side
• Loads from the profile’s end or side
• The ball spring holds the T-nut in vertical position
in the T-slot • Spring leaf positions the T-nut in the slot for
easier assembly
• Refer to pages 743-751 for our full screw and bolt offering
• Compatible with all our 30 Series profiles

Part No. A B C D E F G H kg. Compatibility Code*

Part No. A B (Tap Location) C D E (Thread) Finish kg. 13089 M4 .0038
40-3913 .285 .310 .875 .510 M5 Bright Zinc .0127 8-15
13091 M5 .0036
40-3914 .285 .310 .875 .510 M6 Bright Zinc .0118 16.00 11.60 4.60 7.90 1.00 5.20 R 3.00 8-30
13093 M6 .0034
40-3915 .285 .310 .875 .510 M8 Bright Zinc .0118 8-40
13095 M8 .0030

* See Compatibility Code information on page 642. * See Compatibility Code information on page 642.

728 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 729

Fastening Options

Fastening Options
Metric

Roll-In T-Nuts with Spring Leaf Drop-In T-Nuts

Steel, Zinc-Plated, Self-Aligning Steel/Stainless Steel

• Loads from the profile’s end or side • Loads by dropping into the T-slot, rotating and
• Spring leaf positions the T-nut in the slot for engaging in the slot
easier assembly • Ridges bite into the profile surface maximizing the
• Compatible with 45 Series profiles connection
• See Compatibilty Code below for profile compatibility

Part No. A B C D E F G kg. Compatibility Code*

13059 M5 .013
13061 M6 20.00 15.00 2.00 9.80 6.00 13.00 .012 10-45
13063 M8 .011
3 3
Part No. Material A B C D E kg. Compatibility Code*
14162 10-32 .0012
Drop-In T-Nuts 14164
Steel
M4 11.50 5.70 3.20 1.00 .0012
6-10
Die-Cast Zinc 6-25
14166 Stainless Steel M4 .0012
13118 M6 .0032
Stainless Steel
13111 1/4-20 .0030
• Loads from the profiles’ end or side
13113 M4 .0038
• Compatible with 40 Series profiles 13115 Zinc-Plated M5 16.00 7.70 4.50 1.50 .0031 8-30
13117 M6 .0030
13112 Steel 10-32 .0030
13110 1/4-20 .0031
13114 M4 .0045
13116 Zinc-Plated M5 .0035 8-15
16.00 7.70 4.50 3.00
13119 Steel M6 .0033 8-40
14165 1/4-20 .0033
13123 M4 .0079
13127 M5 .0077
13129 Zinc-Plated M6 .0072
13132 M8 .0057
13122 Steel 10-32 .0076
Part No. A B C D E kg. Compatibility Code* 13120 1/4-20 19.00 9.70 5.80 3.00 .0068 10-45
13179 M3 13124 5/16-18 .0058
13180 M4 13130 M6 .0073
8-15
13181 M5 19.00 14.00 8.00 8.30 .0050 13133 M8 .0061
8-40 Stainless Steel
13182 M6 13121 1/4-20 .0073
14161 1/4-20 13125 5/16-18 .0062

* See Compatibility Code information on page 642. * See Compatibility Code information on page 642.

730 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 731

Fastening Options

Fastening Options
Metric

Drop-In T-Studs Drop-In T-Studs with Flanged Hex Nut

Steel/Stainless Steel
• Loads directly into profile’s slot
• Loads from the profile side or end • Use to connect 30 or 45 Series components
• See Compatibilty Code below for profile compatibility
• Good for connecting joining plates or inside
corner brackets

See page 733 for bolt kits with

flanged hex nuts
See drop-in T-studs on page 732

* See Compatibility Code information on page 642.

Part No. Material A B C D E kg. Compatibility Code*
13135 20.00 .0076
13137 25.00 .0084

3 13139
13141
Stainless Steel 30.00
40.00
.0094
.0112 3
13143 60.00 .0144 Bolt Kit T-Stud Hex Nut Compatibility
M6 1.50 7.70 16.00 8-30 A B C D E F G kg.
13134 20.00 .0062 Part No. Part No. Part No. Code*
13136 25.00 .0070 75-3633 13134 20.00 .0086
13138 Zinc-Plated Steel 30.00 .0086 75-3636 13136 14156 M6 25.00 1.50 7.70 16.00 13.20 5.90 .0095 8-30
13140 40.00 .0104 75-3637 13138 30.00 .0109
13142 60.00 .0134 75-3632 13169 20.00 .0154
13144 20.00 .0056 75-3635 13171 13-3759 M8 25.00 3.00 9.70 19.00 17.10 7.80 .0172 10-45
13145 25.00 .0064 75-3638 13173 30.00 .0186
8-15
13146 Zinc-Plated Steel M6 30.00 3.00 7.70 16.00 .0080
8-40
13147 40.00 .0098
13148 60.00 .0128 Threaded Insert
13159 20.00** .0112
13161 25.00** 0120 Zinc-Plated steel
13163 M6 30.00** .0128
13165 40.00** .0144 • Allows 45 Series pivot joints, such as
13167 60.00** .0176
Zinc-Plated Steel Part No. 14019, to be mounted to a 45
13169 20.00 .0133
13171 25.00 .0148 Series profile end with M8 SHCS
13173 M8 30.00** .0163
• Use a 1/4” hex tool to install the insert —
­
13175 40.00** .0194
13177 60.00** .0255 no tap required
3.00 9.70 19.00 10-45
13160 20.00** .0113
13162 25.00** .0121
• Reduces profile end holes to M8 thread
13164 M6 30.00** .0131
13166 40.00** .0149
13168 Stainless Steel 60.00** .0181
13170 SS304 20.00** .0135
13172 25.00** .0152 Part No. Internal Thread kg. Compatibility Code*
13174 M8 30.00** .0167 14196 M8 .0038 10-45
13176 40.00** .0199
13178 60.00** .0263 * See Compatibility Code information on page 642.
** Drop-In T-Nut with threaded rod

732 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 733

Fastening Options

Fastening Options
Metric

Central Connectors Bolt Connectors

Steel, Zinc-Plated
• Materials:
Bolt and screws: zinc-plated steel
Housing: die-cast zinc
13188
Anti-slip: nylon, white
14013
Horizontal • Very strong 90° connections of 30 and 45
Series profiles
• Refer to page 1048 for required machining
services

13187
14012
Vertical

See page 931 for machining services.

Connector Machining Compatibility

Part No. A B C D E F G kg.
Nut Orientation Service Code*
3 13187
13188
Vertical
Horizontal
15.00 19.00 5.50 52.00 6.00 8.00
11.20
11.00
.0500 7058,
40-7058 8-15, 8-40
3
14012* Vertical
17.00 19.50 5.50 46.00 6.00 10.00 - .0558 45-7058 10-45
14013* Horizontal
* These part numbers are not spring-loaded

Cover Cap For Central Connector

Machining Compatibility
Nylon, Black Part No. A B C D E F G SHCS kg. Service Code*
13189 20.00 28.00 8.00 7.80 5.00 6.70 15.70 M4 x 25 .025 30-7034 8-30
• Covers the bore of the central connector shown above 13190 32.00 43.00 10.00 9.60 6.00 11.60 19.20 M6 x 40 .056 45-7034 10-45
13192 77.00 88.00 10.00 9.60 6.00 11.60 19.20 M6 x 40 .140 45-7037 10-45
• Press fit — use a soft faced mallet

Part No. A B C D kg. Compatibility Code*

13001 12.00 1.50 6.40 17.00 .0010 10-45

* See Compatibility Code information on page 642. * See Compatibility Code information on page 642.

734 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 735

Fastening Options

Fastening Options
Metric

Butt Fasteners Anchor Fasteners

• Fastens two profiles end to end for maximum • Strong 90° connector allows infinite
strength and near perfect alignment adjustability along the T-slot
• Connecting bolt included • Provides a vibration-proof, clean, and flush
• Provides a clean and flush connection where connection where space restrictions apply
space restrictions apply • Creates 90º connections where T-slots are in
• Refer to page 1033 for counterbore machining alignment
specifications • Refer to page 1033 for counterbore machining
specifications
• Ships pre-assembled, saving you time

Part No. Finish Series kg. Part No. Material Bolt Type T-Nut Type kg. Compatibility Code*
25-3369 Zinc Casting w/ Lacquer Finish 25 Series .0186 13183 Zinc Casting w/ Lacquer Finish No Bolt No T-Nut .0034 5-20
40-3370 Zinc Casting w/ Lacquer Finish 40 Series .0612 13184 Zinc Casting w/ Lacquer Finish M5 Roll-In .0073 5-20
25-3396 Zinc Casting w/ Lacquer Finish No Bolt No T-Nut .0072 6-25
25-3896 Zinc Casting w/ Lacquer Finish M5 Slide-In .0091 6-25
25-3392 Zinc Casting w/ Black Finish M5 Slide-In .0091 6-25
25-3363 Zinc Casting w/ Lacquer Finish M5 Roll-In .0091 6-25
13185 Zinc Casting w/ Lacquer Finish No Bolt No T-Nut .0095 8-30
3 13186
40-3361
Zinc Casting w/ Lacquer Finish
Zinc Casting w/ Lacquer Finish
M6
No Bolt
Slide-In
No T-Nut
.0186
.0204
8-30
8-40
3
40-3897 Zinc Casting w/ Lacquer Finish M8 Slide-In .0454 8-40
40-3362 Zinc Casting w/ Lacquer Finish M8 Roll-In .0454 8-40

Anchor Fastener Assembly Steps

Step #1 Step #2 Step #3
Load the Anchor Hold the Anchor Square and align the
Fastener into the Fastener in place mating profile. Using
counterbore hole. while sliding the a 6mm T-handle hex
Position the T-nut mating profile wrench, tighten the
end flush with into position. SHCS until the profiles
outside of profile. are securely affixed.

* See Compatibility Code information on page 642.

736 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 737

Fastening Options

Fastening Options
Metric

Double Anchor Fasteners Standard End Fasteners

25 Series
• One of 80/20®’s strongest fastening options • Provides a clean and hidden method of connecting 40 Series
Below
• Allows infinite positioning along the T-slot profiles at 90º without the use of joining plates

• Provides a vibration-proof, clean, flush • Winged tabs of the clip prevents mating profile
connection where space restrictions apply from rotating
20 Series
• Creates 90º connections where T-slots are in • Mounting profile requires an end tap while the Above
alignment mating profile requires an access hole to reach the
screw head
• Profile must have T-slots opposite each other
• Clip finish: bright zinc
• Short assemblies mount across the 25mm 25-3094 25-3096 40-3100 40-3102
dimension for 25 Series and 40mm dimension Short Long Long Short • See page 1029 for tapping services
for 40 Series See page 1031 for access hole services

• Long assemblies mount across the 50mm dimension for 25 Series and 80mm dimension
Part No. Screw Included Thread kg. Compatibility Code*
for 40 Series 20-3681 No- Clip Only — .0018 5-20
• Refer to page 1033 for counterbore machining specifications 20-3895 Yes (Black) M5 x 12mm .0039 5-20
25-3682 Yes (Stainless Steel) M6 x 1.00 .0091 6-25
25-3895 Yes M6 x 1.00 .0091 6-25
25-3681 No - Clip Only — .0045 6-25
Part No. Finish Bolt Assembly (Included) kg. Profile Compatibility 40-3680 Yes (Stainless Steel) M8 x 1.25 .0218 8-40
25-3094 Zinc Casting w/ Lacquer Finish M5 Short Assembly .028 25-2525, 25-2503, 25-2504, 25-2550, 25-2576 40-3891 Yes M8 x 1.25 .0218 8-40
3 25-3096 Zinc Casting w/ Lacquer Finish M5 Long Assembly .036 25-2550, 25-5050, 25-5010
40-4040, 40-4040-Lite, 40-4003, 40-4004, 40-4080,
40-3679 No - Clip Only — .0113 8-40 3
40-3100 Zinc Casting w/ Lacquer Finish M8 Short Assembly .100
40-4080-Lite, 40-4012
40-3102 Zinc Casting w/ Lacquer Finish M8 Long Assembly .130 40-4080, 40-4080-Lite, 40-8080, 40-8016
End Fastener Assembly Steps

Step #1 Step #2

End Fasteners are composed of two Pre-assembly of End Fasteners is

parts: The Button Head Socket Cap a quick process. Simply place the
Screw (BHSCS) and a Wing Clip. BHSCS through the hole in the Wing
Clip as shown in the photo at left.

Short Step #3 Step #4

Assembly
Shown Orient the Wing Clip in the direction With the End Fastener slightly
of the mating profile’s T-slot. Begin to tightened, slide the mating profile into
screw the BHSCS into the tapped hole place. When aligned, the access hole
of the mounting profile. on the mating profile should align with
(Do NOT fully tighten) the BHSCS.

Step #5

To tighten the connection, place a

T-handle hex wrench into the access
hole until the wrench head inserts into
the BHSCS. Tighten clockwise until
secure. * See Compatibility Code information on page 642.

738 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 739

Fastening Options

Fastening Options
Metric

Single Tab End Fasteners Connecting Screws 13003

Regular and Self-Tapping Hex Drive
• Provides a clean and hidden method of connecting
closed sided and quarter round profiles at 90º without • Regular connecting screws M12 x 30 mm, hex
the use of joining plates or six lobe drive, require tap and access hole
• Winged tab of the clip prevents mating profile machining services when used
from rotating • Self-tapping screw S12 x 30 mm does not require
• Mounting profile requires an end tap while the machining. The self-tapping operation must be
13004
mating profile requires an access hole to reach the done with a T40 or T50 six lobe power bit and drill
Six Lobe Drive
screw head • Power Bit T40 - Part No. 65-6073
• See page 1029 for tapping services Power Bit T50 - Part No. 65-6068
See page 1031 for access hole services

Part No. Finish Screw Included Thread kg.

25-3383 Bright Zinc Yes M6 x 1.00 .0071
25-3183 Bright Zinc No N/A .0022
40-3389 Bright Zinc Yes M8 x 1.25 .0168
40-3189 Bright Zinc No N/A .0065

3 3
End Fastener Assembly Steps

Step #1 Step #2
Part No. Type Drive A B kg. Compatibility Code*
End Fasteners are composed of two Pre-assembly of End Fasteners is a 13003 Regular Hex 30.00 M12 .036 10-45
parts: The Button Head Socket Cap quick process. Simply place the 13004 Regular Six Lobe 30.00 M12 .036 10-45
Screw (BHSCS) and a Wing Clip. BHSCS through the hole in the Wing 13006 Self-Tapping Six Lobe 30.00 S12 .032 10-45
Clip as shown in the photo at left.

Step #3 Step #4

Orient the Wing Clip in the direction With the End Fastener slightly 13006
of the mating profile’s T-slot. Begin to tightened, slide the mating profile into Six Lobe
screw the BHSCS into the tapped hole place. When aligned, the access hole Drive
of the mounting profile. on the mating profile should align with
(Do NOT fully tighten) the BHSCS.

Step #5
Six Lobe
To tighten the connection, place a
T-handle hex wrench into the access Power Bit
hole until the wrench head inserts into
the BHSCS. Tighten clockwise until
secure.
* See Compatibility Code information on page 642.

740 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 741

Fastening Options

Fastening Options
Metric

Plate Connectors Metric Screws, Washers, & Nuts (Blue-Coated)

Die-Cast Zinc
Button Head Socket Cap Screws Socket Head Cap Screws
• M12 end tap is required Thread Length kg. Lbs. Part No. Thread Length kg. Lbs. Part No.
10mm .0018 .0039 13-5310 10mm .0025 .0056 13-5510
• Refer to page 1029 for end tap machining
12mm .0021 .0046 13-5312 12mm .0028 .0061 13-5512
services M5 x 0.8
16mm .0024 .0053 13-5316 M5 x 0.8 16mm .0032 .0071 13-5516
20mm .0027 .0060 13-5320 20mm .0034 .0076 13-5520
• Available with a natural, plain finish or aluminum 10mm .0030 .0066 13-6310 30mm .0037 .0081 13-5530
color powder coat 12mm .0036 .0079 13-6312 10mm .0044 .0097 13-6510
M6 x 1.0 16mm .0043 .0095 13-6316 12mm .0049 .0109 13-6512
• Allow for plate thickness (13mm) when 20mm .0049 .0108 13-6320 16mm .0056 .0124 13-6516
dimensioning frames 25mm .0056 .0124 13-6325 20mm .0061 .0135 13-6520
M6 x 1.0
12mm .0066 .0146 13-8312 25mm .0072 .0158 13-6525
16mm .0078 .0171 13-8316 30mm .0082 .0182 13-6530
M8 x 1.25
20mm .0087 .0191 13-8320 35mm .0093 .0206 13-6535
25mm .0105 .0231 13-8325 40mm .0104 .0230 13-6540
12mm .0102 .0225 13-8512
Flat Head Socket Cap Screws 16mm .0112 .0246 13-8516
18mm .0118 .0260 13-8518
Thread Length kg. Lbs. Part No. 20mm .0124 .0279 13-8520
10mm 11-4710 22mm .0130 .0294 13-8522
M4 x 0.7 M8 x 1.25
12mm 11-4712 25mm .0140 .0310 13-8525
8mm 11-5708 30mm .0159 .0351 13-8530
10mm 11-5710 35mm .0180 .0397 13-8535

3 M5 x 0.8
12mm
14mm
11-5712
11-5714
40mm
50mm
.0204
.0234
.0450
.0517
13-8540
13-8550 3
16mm 11-5716 20mm .0172 .0380 13-1520
M10 x 1.5
12mm .0027 .0060 13-5712 25mm .0195 .0430 13-1525
14mm 11-6714
16mm 11-6716
18mm 11-6718 Hex Nuts
Machining Compatibility M6 x 1.0 20mm 11-6720
Part No. Finish A B C D E F G H J K kg. 10mm .0030 .0066 13-6710 Thread kg. Lbs. Part No.
Service Code*
14137 Natural 32.00 25.00 12.50 10.00 45.00 1.70 6.50 11.00 7.00 13.00 .089 45-7053 10-45 12mm .0034 .0074 13-6712 M5 x 0.8 .0016 .0035 13-5065
14136 Aluminum Color 32.00 25.00 12.50 10.00 45.00 1.70 6.50 11.00 7.00 13.00 .089 45-7053 10-45 16mm .0041 .0090 13-6716 M6 x 1.0 .0021 .0046 13-6065
16mm 11-8716 M8 x 1.25 .0047 .0105 13-8065
20mm 11-8720 M12 x 1.75 .0086 .0190 13-2065
Recommended Bolt Assembly: * See Compatibility Code information on page 642.
M8 x 1.25 12mm .0060 .0133 13-8712
Part No. Qty Description 16mm .0070 .0154 13-8716
13004 1 M12 x 30mm Six Lobe Screw 20mm .0079 .0175 13-8720
11-6516 2 M6 x 16mm SHCS M10 x 1.5 16mm .0122 .0270 13-1716
13129 2 M6 Drop-In T-Nut
Refer to page 914 for required machining services.
Flat Washers
Size kg. Lbs. Part No.
M5 .0008 .0018 13-6040
M6 .0010 .0020 13-6041
M8 .0018 .0040 13-6042
M10 .0028 .0061 13-6043
M12 .0038 .0083 13-6044

Attach plate with M12 Load M6 SHCS on both Position the other profile,
x 30 mm BHSCS, Hex sides with T-nuts attached. align fasteners and tighten.
drive (13004).

742 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 743

Fastening Options

Fastening Options
Metric

Metric Screws, Washers, & Nuts (Black-Coated) Metric Screws, Washers, & Nuts (Stainless Steel)

Socket Head Cap Screws Button Head Socket Cap Screws Socket Head Cap Screws Button Head Socket Cap Screws
Thread Length kg. Lbs. Part No. Thread Length kg. Lbs. Part No. Thread Length kg. Lbs. Part No. Thread Length kg. Lbs. Part No.
M4 x 0.7 16mm .0021 .0048 11-4516 8mm 11-5308 10mm .0024 .0054 17-5510 10mm .0019 .0043 17-5310
10mm .0025 .0056 11-5510 10mm .0018 .0039 11-5310 12mm .0028 .0063 17-5512 M5 x 0.8 12mm .0023 .0050 17-5312
M5 x 0.8
12mm .0028 .0061 11-5512 12mm .0021 .0046 11-5312 16mm .0033 .0072 17-5516 16mm .0026 .0057 17-5316
M5 x 0.8 M5 x 0.8
16mm .0032 .0071 11-5516 14mm 11-5314 20mm .0037 .0081 17-5520 10mm .0033 .0074 17-6310
20mm .0034 .0076 11-5520 16mm .0024 .0053 11-5316 10mm .0045 .0099 17-6510 12mm .0037 .0081 17-6312
M6 x 1.0
10mm .0044 .0097 11-6510 10mm .0030 .0066 11-6310 12mm .0048 .0104 17-6512 16mm .0044 .0098 17-6316
M6 x 1.0
12mm .0049 .0109 11-6512 12mm .0036 .0079 11-6312 16mm .0056 .0123 17-6516 20mm .0050 .0110 17-6320
14mm .0049 .0110 11-6514 14mm 11-6314 20mm .0065 .0143 17-6520 12mm .0068 .0150 17-8312
M6 x 1.0
16mm .0056 .0124 11-6516 16mm .0043 .0095 11-6316 12mm .0090 .0199 17-8512 16mm .0077 .0171 17-8316
M8 x 1.25
18mm .0058 .0128 11-6518 18mm 11-6318 16mm .0101 .0222 17-8516 20mm .0087 .0192 17-8320
M6 x 1.0
20mm .0061 .0135 11-6520 20mm .0049 .0108 11-6320 20mm .0111 .0245 17-8520 25mm .0105 .0233 17-8325
25mm .0072 .0158 11-6525 12mm .0066 .0146 11-8312 M8 x 1.25 25mm .0125 .0276 17-8525
30mm .0082 .0182 11-6530 16mm .0078 .0171 11-8316 30mm .0157 .0348 17-8530
35mm .0093 .0206 11-6535 M8 x 1.25 18mm 11-8318 35mm .0130 .0397 17-8535 Flat Washers
40mm .0104 .0230 11-6540 20mm .0087 .0191 11-8320 40mm .0204 .0450 17-8540
12mm .0102 .0225 11-8512 25mm .0105 .0231 11-8325 Size kg. Lbs. Part No.
16mm .0112 .0246 11-8516 M6 .0013 .0028 17-6041
18mm .0120 .0266 11-8518 Flat Head Socket Cap Screws M8 .0021 .0047 17-6042
20mm .0124 .0274 11-8520 Flat Washers
M8 x 1.25 Thread Length kg. Lbs. Part No.
25mm .0140 .0310 11-8525
Size kg. Lbs. Part No. M5 x 0.8 12mm .0027 .0060 13-5712 Hex Nuts
30mm .0159 .0351 11-8530
M4 .0004 .0009 11-6039
3 35mm
40mm
.0180
.0204
.0379
.0450
11-8535
11-8540
M5 .0007 .0015 11-6040
M6 x 1.0
10mm
12mm
.0030
.0032
.0066
.0070
13-6710
17-6712 Thread kg. Lbs. Part No. 3
M6 .0010 .0022 11-6041 12mm .0034 .0074 13-6712 M6 x 1.0 .0019 .0042 17-6065
M8 .0018 .0040 11-6042 16mm .0041 .0090 13-6716 M8 x 1.25 .0046 .0101 17-8065
12mm .0060 .0133 13-8712 M10 x 1.5 .0065 .0143 17-1065
M8 x 1.25 16mm .0070 .0154 13-8716
Hex Nuts 20mm .0079 .0175 13-8720
M10 x 1.5 16mm .0122 .0270 13-1716
Thread kg. Lbs. Part No.
M4 x 0.7 .0010 .0022 11-4065
M5 x 0.8 .0015 .0033 11-5065
M6 x 1.0 .0021 .0046 11-6065
M8 x 1.25 .0047 .0105 11-8065
M10 x 1.5 .0067 .0147 11-1065

Button Head Socket Head Flat Head Flanged Button

Socket Cap Cap Screw Socket Cap Head Socket
Screw (BHSCS) (SHCS) Screw (FHSCS) Cap Screw
(FBHSCS)

744 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 745

Fastening Options

Fastening Options
Metric

Metric Screws, Washers, & Nuts (Bright Zinc) Fractional Screws, Washers, & Nuts (Black Zinc)

Button Head Socket Cap Screws Slide-In Economy T-Nuts Button Head Socket Cap Screws Roll-In T-Nuts - Flex Handle
Thread Length kg. Lbs. Part No. Thread kg. Lbs. Part No. Thread Length kg. Lbs. Part No. Thread kg. Lbs. Part No.
12mm .0034 .0074 19-6312 M4 x 0.7 .0035 .0078 25-1941 3/8” .0029 .0065 65-3059 .0037 .0081 25-3376
1/4-20
16mm .0040 .0088 19-6316 M5 x 0.8 .0037 .0080 25-1951 1/2“ .0036 .0080 65-3061 .0109 .0241 40-3283
M6 x 1.0 1/4-20
20mm .0047 .0105 19-6320 M6 x 1.0 .0042 .0093 25-1961 5/8” .0043 .0095 65-3063 5/16-18 .0103 .0227 40-3282
25mm .0056 .0124 19-6325 M6 x 1.0 .0080 .0177 40-1961 3/4” .0049 .0109 65-3065
12mm .0070 .0150 19-8312 M8 x 1.25 .0093 .0206 40-1981 1/2” .0067 .0147 65-3104
16mm .0081 .0179 19-8316 5/8” .0077 .0170 65-3111 Roll-In T-Nuts - Set Screw
M8 x 1.25 5/16-18
20mm .0091 .0201 19-8320 3/4” .0087 .0191 65-3114
25mm .0110 .0242 19-8325 Double Slide-In Economy T-Nuts 1” .0106 .0233 65-3118 Thread kg. Lbs. Part No.
10-32 .0036 .0079 25-3312
Thread kg. Lbs. Part No. .0036 .0079 25-3313
1/4-20
Socket Head Cap Screws M6 x 1.0 .0090 .0198 25-1962 Socket Head Cap Screws .0122 .0269 40-3310
M8 x 1.25 .0280 .0625 40-1982 5/16-18 .0118 .0260 40-3311
Thread Length kg. Lbs. Part No. Thread Length kg. Lbs. Part No.
12mm .0050 .0106 19-6512 3/8” .0044 .0096 65-3058
16mm .0054 .0120 19-6516 Slide-In T-Nuts 1/2” .0050 .0110 65-3062 Hex Nuts
M6 x 1.0
20mm .0060 .0128 19-6520 1/4-20 5/8” .0056 .0124 65-3067
25mm .0070 .0152 19-6525 Thread kg. Lbs. Part No. 3/4” .0062 .0136 65-3064 Thread kg. Lbs. Part No.
12mm .0102 .0225 19-8512 M5 x 0.8 .0045 .010 25-3206 1” .0072 .0159 65-3071 1/4-20 .0032 .0070 65-3208
16mm .0112 .0246 19-8516 M5 x 0.8 .0045 .010 25-1954 1/2” .0088 .0194 65-3106 5/16-18 .0047 .0103 65-3214
M8 x 1.25 20mm .0124 .0274 19-8520 M6 x 1.0 .0045 .010 25-1964 5/8” .0098 .0217 65-3110
25mm .0140 .0310 19-8525 M6 x 1.0 .0091 .020 40-1964 5/16-18 3/4” .0108 .0237 65-3112
3 30mm .0160 .0351 19-8530 M8 x 1.25 .0091 .020 40-1984 1”
1 1/4”
.0125
.0146
.0276
.0323
65-3122
65-3123
Flat Washers
3
Size kg. Lbs. Part No.
Slide-In Economy T-Slot Studs Roll-In T-Nuts - Flex Handle 1/4 .0017 .0037 65-3258
Slide-In Economy T-Slot Studs 5/16 .0020 .0045 65-3260
Thread Length kg. Lbs. Part No. Thread kg. Lbs. Part No.
20mm .0142 .0313 19-8920 M5 x 0.8 .0045 .0100 25-1956
Thread Length kg. Lbs. Part No.
25mm .0153 .0338 19-8925 M6 x 1.0 .0038 .0083 25-1966 3/4” .0117 .0257 40-3116
M8 x 1.25 30mm .0169 .0373 19-8930 M6 x 1.0 .0106 .0233 40-1966 1” .0139 .0308 40-3120
35mm .0194 .0427 19-8935 M8 x 1.25 .0103 .0228 40-1986 5/16-18 1 1/4” .0156 .0345 40-3126
45mm .0213 .0470 19-8945 1 1/2” .0177 .0391 40-3134
Roll-In T-Nuts - Set Screw 2” .0225 .0496 40-3290
Flat Washers
Thread kg. Lbs. Part No.
M6 x 1.0 .0118 .026 40-1968 Slide-In Economy T-Nuts
Size kg. Lbs. Part No.
M6 .0010 .0022 19-6041 M8 x 1.25 .0113 .025 40-1988
Thread kg. Lbs. Part No.
M8 .0018 .0040 19-6042 .0041 .0091 25-3382
1/4-20
Hex Nuts .0054 .0120 40-3286
5/16-18 .0093 .0206 40-3278
Roll-In T-Nuts with Ball Spring
Thread kg. Lbs. Part No.
Thread Lbs. Part No. M6 x 1.0 .0021 .0046 19-6065
M5 .028 40-3913 M8 x 1.25 .0047 .0105 19-8065 Slide-In T-Nuts
M6 .026 40-3914 M10 x 1.5 .0065 .0143 19-1065
Thread kg. Lbs. Part No.
M8 .026 40-3915 M12 x 1.75 .0086 .0190 19-2065
.0045 .010 25-3204
1/4-20
.0090 .020 40-3202
5/16-18 .0090 .020 40-3203

746 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 747

Fastening Options

Fastening Options
Metric

Bolt Assemblies Bolt Assemblies Continued

Metric (Blue Screws & Bright Zinc T-Nuts) Slide-In Economy T-Slot Studs (Bright Zinc)

Screw Economy Drop-In Thread Screw Type Length kg. Lbs. Hex Nut
Thread Length kg. Lbs. kg. Lbs. Hex Nut Washer 20mm .0208 .0458 75-3500
Type T-Nut T-Nut
25mm .0220 .0486 75-3501
SHCS 10mm 75-3401 .0063 .0138 – – – – – M8 x 1.25 T-Slot Stud, Washer 30mm .0235 .0518 75-3502
SHCS 12mm 75-3402 .0074 .0141 – – – – – 35mm .0262 .0578 75-3503
M5 x 0.8 SHCS 16mm 75-3403 .0068 .0157 – – – – – 45mm .0279 .0615 75-3504
SHCS,
16mm – .0072 .0159 – – – 75-3400 –
Washer
BHSCS 10mm 75-3404 .0073 .0160 75-3435 .0068 .0150 – – Roll-In T-Nut Assemblies (Blue Screw & Bright Zinc T-Nut)
BHSCS 12mm 75-3405 .0076 .0167 75-3436 .0071 .0157 – –
BHSCS 16mm 75-3406 .0083 .0183 75-3437 .0078 .0173 – 75-3477 Thread Screw Type Length kg. Lbs. Part No.
M6 x 1.0 FHSCS 12mm .0071 .0157 75-3505
BHSCS 20mm 75-3407 .0091 .0200 75-3438 .0086 .0190 – –
M8 x 1.25 FHSCS 16mm .0173 .0382 75-3506
BHSCS,
12mm 75-3408 .0086 .0189 75-3439 .0081 .0179 75-3466 –
Washer
BHSCS, Slide-In Economy T-Nut Assemblies (Blue Screw & Bright Zinc T-Nut)
16mm 75-3409 .0093 .0205 75-3440 .0088 .0195 75-3467 –
Washer
Thread Screw Type Length kg. Lbs. Part No.
BHSCS,
20mm 75-3410 .0101 .0222 75-3441 .0096 .0212 75-3468 – M6 x 1.0 FHSCS 12mm .0076 .0167 75-3507
Washer
M8 x 1.25 FHSCS 16mm .0163 .0360 75-3508
SHCS 10mm 75-3411 .0087 .0191 75-3442 .0082 .0181 – –
M6 x 1.0
SHCS 12mm 75-3412 .0089 .0197 75-3443 .0084 .0187 – –
SHCS 16mm 75-3413 .0098 .0216 75-3444 .0093 .0106 – – Double Slide-In Economy T-Nut Assemblies (Blue Screw & Bright Zinc T-Nut)
SHCS 20mm 75-3414 .0103 .0227 75-3445 .0098 .0217 – –
Thread Screw Type Length kg. Lbs. Part No.
3 SHCS
SHCS
25mm
30mm
75-3415
75-3416
.0114
.0126
.0252
.0279
75-3446
75-3447
.0110
.0122
.0242
.0269
–
–
–
– BHSCS (2) 10mm .0145 .0320 75-3509 3
SHCS 35mm 75-3417 .0144 .0318 75-3448 .0140 .0308 – – M6 x 1.0 BHSCS (2) 12mm .0161 .0356 75-3510
SHCS 40mm 75-3418 .0148 .0326 75-3449 .0143 .0316 – – BHSCS, Washers (2) 12mm .0177 .0390 75-3511
BHSCS (2) 12mm .0416 .0917 75-3512
SHCS,
12mm 75-3419 .0099 .0219 75-3450 .0095 .0209 75-3469 – M8 x 1.25 BHSCS (2) 16mm .0439 .0967 75-3513
Washer
BHSCS, Washers (2) 16mm .0475 .1047 75-3514
SHCS,
16mm 75-3420 .0108 .0238 75-3451 .0103 .0228 75-3470 –
Washer
BHSCS 12mm 75-3421 .0162 .0358 75-3452 .0177 .0380 – – Cap Screws (Black Screw & Bright Zinc T-Nut)
BHSCS 16mm 75-3422 .0176 .0388 75-3453 .0136 .0410 – –
BHSCS 20mm 75-3423 .0180 .0397 75-3454 .0190 .0419 – 75-3478 Thread Screw Type Length kg. Lbs. Part No.
SHCS 10mm .0087 .0191 75-3520
BHSCS 25mm 75-3424 .0198 .0437 75-3455 .0208 .0459 – –
SHCS 12mm .0089 .0197 75-3521
BHSCS,
16mm 75-3425 .0194 .0428 75-3456 .0204 .0450 75-3471 – SHCS 16mm .0098 .0216 75-3522
Washer
SHCS 20mm .0103 .0227 75-3523
BHSCS, SHCS 25mm .0114 .0252 75-3524
20mm 75-3426 .0198 .0437 75-3457 .0208 .0459 75-3472 – M6 x 1.0
Washer BHSCS 10mm .0073 .0160 75-3515
BHSCS, BHSCS 12mm .0076 .0167 75-3516
25mm 75-3427 .0216 .0477 75-3458 .0226 .0499 75-3473 –
Washer BHSCS 16mm .0083 .0183 75-3517
M8 x 1.25
SHCS 12mm 75-3428 .0196 .0431 75-3459 .0205 .0453 – – BHSCS, Washer 12mm .0086 .0189 75-3518
SHCS 16mm 75-3429 .0205 .0452 75-3460 .0215 .0474 – – BHSCS, Washer 16mm .0093 .0205 75-3519
SHCS 20mm 75-3430 .0218 .0480 75-3461 .0227 .0502 – – BHSCS 12mm .0162 .0358 75-3525
SHCS 25mm 75-3431 .0234 .0516 75-3462 .0244 .0538 – – BHSCS 16mm .0176 .0388 75-3526
SHCS, BHSCS 20mm .0180 .0397 75-3527
16mm 75-3432 .0223 .0492 75-3463 .0233 .0514 75-3474 –
Washer BHSCS, Washer 16mm .0194 .0428 75-3528
SHCS, BHSCS, Washer 20mm .0198 .0437 75-3529
20mm 75-3433 .0235 .0520 75-3464 .0296 .0592 75-3475 –
Washer SHCS 12mm .0196 .0431 75-3530
SHCS, M8 x 1.25 SHCS 16mm .0205 .0452 75-3531
25mm 75-3434 .0252 .0556 75-3465 .0262 .0578 75-3476 – SHCS 18mm .0211 .0466 75-3634
Washer
SHCS 20mm .0218 .0480 75-3532
SHCS 25mm .0234 .0516 75-3533
SHCS, Washer 16mm .0306 .0674 75-3534
SHCS, Washer 20mm .0329 .0726 75-3535
SHCS, Washer 25mm .0346 .0762 75-3536

748 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 749

Fastening Options

Fastening Options
Metric

Bolt Assemblies Continued Bolt Assemblies Continued

Bolt Kit Part No. Screw Type Screw Part No. Nut Part No. Washer
Fractional (Black) 75-3571 (20) M5 x 8mm FHSCS 11-5708 14122 no
75-3572 (20) M5 x 10mm FHSCS 11-5710 14122 no
Screw Economy Drop-In M5 x 14mm FHSCS 11-5714 11-5065 11-6040
Thread Length kg. Lbs. kg. Lbs. 75-3573
Type T-Nuts T-Nuts
75-3574 (30) M5 x 14mm FHSCS 11-5714 13115 no
BHSCS 1/2” 75-3800 .0077 .0171 75-3801 .0073 .0161 M5 x 16mm FHSCS 11-5716 13115 no
75-3575 (30)
BHSCS 5/8” 75-3802 .0090 .0198 75-3803 .0085 .0188
75-3576 M5 x 14mm BHSCS 11-5314 11-5065 11-6040
BHSCS 3/4” 75-3804 .0101 .0223 75-3805 .0097 .0213
75-3578 (20) M5 x 12mm SHCS 11-5512 14122 no
BHSCS, Washer 1/2” 75-3806 .0094 .0208 75-3807 .0090 .0198
BHSCS, Washer 5/8” 75-3808 .0101 .0223 75-3809 .0097 .0213 75-3581 (20) M5 x 8mm BHSCS 11-5308 14122 no
BHSCS, Washer 3/4” 75-3810 .0118 .0260 75-3811 .0113 .0250 75-3583 (30) M5 x 12mm BHSCS 11-5312 13115 no
1/4-20 SHCS 1/2” 75-3812 .0091 .0201 75-3813 .0087 .0191 75-3584 M6 x 14mm FHSCS 11-6714 25-1964 no
SHCS 5/8” 75-3814 .0096 .0212 75-3815 .0092 .0202 75-3585 (30) M6 x 14mm FHSCS 11-6714 13117 no
SHCS 3/4” 75-3816 .0101 .0223 75-3817 .0097 .0213 75-3586 M6 x 18mm FHSCS 11-6718 13119 no
SHCS 1” 75-3818 .0114 .0251 75-3819 .0109 .0241 75-3587 (45) M6 x 18mm FHSCS 11-6718 13129 no
SHCS, Washer 1/2” 75-3820 .0108 .0238 75-3821 .0103 .0228 75-3588 (45) M6 x 20mm FHSCS 11-6720 13129 no
SHCS, Washer 5/8” 75-3822 .0114 .0252 75-3823 .0111 .0242 75-3589 M6 x 20mm FHSCS 11-6720 11-6065 11-6041
SHCS, Washer 3/4” 75-3824 .0121 .0266 75-3825 .0116 .0256 75-3590 (30) M6 x 10mm SHCS 11-6510 13117 no
BHSCS 5/8” 75-3826 .0171 .0376 75-3827 .0181 .0398 75-3591 M6 x 16mm FHSCS 11-6716 13119 no
BHSCS 3/4” 75-3828 .0180 .0397 75-3829 .0190 .0419 M6 x 14mm SHCS 11-6514 25-1964
75-3592 no
BHSCS 1” 75-3830 .0200 .0439 75-3831 .0209 .0461
75-3593 (30) M6 x 14mm SHCS 11-6514 13117 no
BHSCS, Washer 5/8” 75-3832 .0183 .0403 75-3833 .0193 .0425
75-3594 (45) M6 x 14mm SHCS 11-6514 13129 no
BHSCS, Washer 3/4” 75-3834 .0198 .0437 75-3835 .0208 .0459
BHSCS, Washer 1” 75-3836 .0232 .0512 75-3837 .0242 .0534 75-3595 (30) M6 x 16mm SHCS 11-6516 13117 no

3 5/16-18 SHCS
SHCS
1/2”
5/8”
75-3838
75-3840
.0181
.0191
.0398
.0421
75-3839
75-3841
.0191
.0201
.0420
.0443
75-3596 (30)
75-3597 (45)
M6 x 18mm SHCS
M6 x 20mm SHCS
11-6518
11-6520
13117
13129
no
no 3
SHCS 3/4” 75-3842 .0204 .0450 75-3843 .0214 .0472 75-3599 (30) M6 x 10mm BHSCS 11-6310 13117 no
SHCS 1” 75-3844 .0230 .0508 75-3845 .0240 .0530 75-3600 (30) M6 x 12mm BHSCS 11-6312 13117 no
SHCS, Washer 5/8” 75-3846 .0212 .0468 75-3847 .0222 .0490 75-3601 M6 x 14mm BHSCS 11-6314 13119 no
SHCS, Washer 3/4” 75-3848 .0220 .0485 75-3849 .0230 .0507 75-3602 (45) M6 x 14mm BHSCS 11-6314 13129 no
SHCS, Washer 1” 75-3850 .0239 .0528 75-3851 .0250 .0550 75-3603 M6 x 14mm BHSCS 11-6314 11-6065 no
75-3605 M6 x 18mm BHSCS 11-6318 11-6065 11-6041
75-3616 M6 x 14mm FHSCS 11-6714 25-1964 no
75-3617 M8 x 20mm FHSCS 11-8720 11-8065 no
75-3618 (40) M8 x 16mm FHSCS 11-8716 40-1981 no
75-3619 (45) M8 x 18mm BHSCS 11-8318 13132 no
Metric (Black) 75-3621 M8 x 16mm SHCS 11-8516 40-1981 no
75-3622 M6 x 14mm BHSCS 11-6314 13119 no
Bolt Kit Part No. Screw Type Screw Part No. Nut Part No. Washer 75-3623 (45) M8 x 16mm SHCS 11-8516 13132 no
75-3401 M5 x 10mm SHCS 13-5510 25-1951 no 75-3624 M8 x 12mm SHCS 11-8512 13025 no
75-3481 M5 x 20mm SHCS 11-5520 13127 11-6040 75-3625 M8 x 16mm SHCS 11-8516 13025 no
75-3482 M6 x 18mm BHSCS 11-6318 13129 no 75-3626 (45) M8 x 18mm SHCS 11-8518 13132 no
75-3483 M5 x 16mm SHCS 11-5516 13116 11-6040 75-3627 M8 x 18mm SHCS 11-8518 13025 no
75-3520 M6 x 10mm SHCS 11-6510 3859 no 75-3628 M6 x 18mm FHSCS 11-6718 13119 no
75-3523 M6 x 20mm SHCS 11-6520 3859 no 75-3629 M8 x 16mm FHSCS 11-8716 13025 no
75-3553 M4 x 20mm SHCS 11-4520 14164 no 75-3630 (45) M8 x 20mm SHCS 11-8520 13132 no
75-3552 (20) M4 x 10mm FHSCS 11-4710 14159 no 75-3632 M8 x 20mm Drop-In T-Stud 13169 13-3759 no
75-3556 M4 x 10mm SHCS 11-4510 14164 no 75-3633 M6 x 20mm Drop-In T-Stud 13134 14156 no
75-3558 M4 x 16mm SHCS 11-4516 11-4065 11-6039 75-3635 M8 x 25mm Drop-In T-Stud 13171 13-3759 no
75-3560 M4 x 12mm SHCS 11-4512 13114 no 75-3636 M6 x 25mm Drop-In T-Stud 13136 14156 no
75-3562 M4 x 12mm FHSCS 11-4712 11-4065 11-6039 75-3638 M8 x 30mm Drop-In T-Stud 13173 13-3759 no
75-3563 (45) M4 x 12mm SHCS 11-4512 13123 no 75-3639 M6 x 30mm Drop-In T-Stud 13138 14156 no

750 Phone: 260-248-8030 • Fax: 260-248-8029 • www.8020.net 751

Fastening Options

Emergency Vehicle Solutions by 80/20®

• Firefighter equipment conveniently and

securely stowed in the vehicle
• Quick, easy access to equipment

752