EN
Q-66HR Q-Band HR User Manual
Device Overview
Reversible Wristband
Core Clasp
Touch Button
Metallic contact for charging
Optical Sensor
How to wear your Q-Band HR?
1 Wear Q-Band HR on your wrist 2 Fasten Q-Band HR with clasp
Video Demo
Put on the wristband with the screen facing up and the band wrapped Squeeze both clasps into the holes on the wristband until you hear a
around your wrist. Slide one band through the loop of the other band, and click, indicating the band is securely fastened.
align the clasp along the band to find the holes where best fit the clasps.
Note: The watch band is replaceable and both side wearable/reversible.
Video Demo: http://ww2.voiis.com/igotu-life/wear/Q-Band-HR-New-Band
3 Charge your Q-Band HR 4 Change the wristband
1
1
To charge your Q-Band HR, place it in the charging box at 1. Spread open both bands with the screen facing up, and press down the screen
the other end of the USB cable. Close the box afterwards, with your thumb until the core comes off the wristband.
and make sure the Q-Band HR is securely covered. Plug the 2. Insert the core with screen facing up into the notch from below the wristband.
USB connector to either a PC or power adapter to start Make sure the two tenons on each side of the core are securely fixed into the
charging. corresponding slots in the bands.
Important Notice:
Failure to follow the instructions above might cause damage to the device.
Q-66HR Q-Band HR User Manual
Get started with Q-Band HR
1 Download and Install i-gotU Life app 2 Set up Q-Band HR
Please download i-gotU Life app from Google Play or the App Store Your Q-Band HR can be configured directly on the i-gotU Life app.
and have it installed on your smartphone:
First time setup:
https://play.google.com/store/apps/details?id=com.mobileaction.ilife
http://appstore.com/igotulife 1. Open the i-gotU Life app.
2. A Setup Wizard will be launched automatically.
3. Follow the on-screen instructions to proceed with more settings.
Set up a new device from Settings:
1. Open the i-gotU Life app.
Apk download: http://global.mobileaction.com/download/apk 2. Tap the app icon at the upper left corner to open function menu.
3. Choose Settings.
Supported device 4. Tap Setup New Device under MORE DEVICE SETTINGS.
• Any Android smartphone (v4.3 and up) with built-in 4.0 5. Follow the on-screen instructions to continue.
Bluetooth connectivity; or
• iPhone 4s and later models, iPad 2 and later models, Note
and iPod Touch (all with iOS version 7.0 and up).
• A complete list of supported smartphone or mobile Your personal information is used to calculate your Base Metabolic
devices can be found at: Rate (BMR), which determines your calories burned.
http://ww2.voiis.com/qband/devices.html
3 Start Using Q-Band HR 4 Features of Q-Band HR & i-gotU Life App
1. Switch between different function modes Silent Alarm
1. Tap the button twice to wake up the device screen. Silent alarm of Q-Band HR gives you a wake-up alert via soft vibrations.
2. Long-press the button on the Q-Band HR until you see 4 icons While in the sleep mode, the alarm can be dismissed by long-pressing
on the screen for mode selection. the button on Q-Band HR. By pressing the button once, the alarm will
3. Tap the button twice to switch mode. not be dismissed but alert you again in 5 minutes. Alarm settings can
4. You’ll be entering the selected mode in 3 seconds. be changed in: open i-gotU Life app > Menu > Silent Alarm.
2. Change display information Notification
Information shown on the screen will vary as you press the You will be notified with incoming calls, SMS, E-Mail, or alerts from the
button on the Q-Band HR to toggle between screens. social apps via vibration. When notified about an incoming call on an
Android smartphone, you may reject the call by long-pressing the
3. Q-Band HR modes button on Q-Band HR. Notification can be set up from: i-gotU Life App
Daily mode: Analyzes your daily data, including steps taken Menu -> Notification.
and calories burned.
Sleep mode: Tracks your sleep pattern and quality. Online Help
Android: http://ww2.voiis.com/igotu-life/help.html?language=en
Sports mode: Starts a workout and displays information iOS: http://ww2.voiis.com/igotu-life/help.html?language=en&platform=ios
including duration, steps taken, calories burned, and distance
traveled during the workout. Manual download
Nap mode: Awakes you via vibration after a short nap. http://www.mobileaction.com/download/Q-Band_download.jsp
4. Icon description
Date
Connection Status
Current Mode
Overall Progress (the average of Calories + Steps)
Battery Status
Heart Rate
Important Notice WEEE
1. Please make sure your Q-Band HR is fully charged when used for the
Note on environmental protection:
first time. It takes about 2 hours before it is fully charged.
After the implementation of the European Directive 2002/96/EU in the
2. Although the device is usable in the rain, its use under water is national legal system, the following applies:
prohibited. Please avoid showering or sauna/steam bathing because Electrical and electronic devices may not be disposed of with domestic
high temperature, steam and water jet may cause damage to the Waste. Consumers are obliged by law to return electrical and electronic
device. devices at the end of their service lives to the public collecting points set up
for this purpose or point of sale. Details to this are defined by the national
3. Please do not use any corrosive chemical to clean the device. law of the respective country. This symbol on the product, the instruction
manual or the package indicates that a product is subject to these
4. The built-in Li-Polymer Battery might be damaged if it remains low regulations. By recycling, reusing the materials or other forms of utilizing old
voltage for a long time. It is suggested that you charge the battery once
devices, you are making an important contribution to protecting our
every three months to prolong the battery's lifetime, even though you
environment.
don't use the device very often or do not plan to use it for a while.
