Type BM11 Load Cell
Short description
Stainless steel IP68 single ended bending beam test certificate no. TC7968 Revision 0
Hermetically sealed C of C no R60/2000-NL1-11.20
Suitable for pallet, platform and small hopper scales
Certificate no. 07-020A1
High accuracy
Current calibrated (sc-option)
Available models
Capacity Accuracy Full article description
5kg C3 Excluded from OIML BM11-C3-5kg-3B-SC
10kg C3/C4 BM11-C3/C4-10kg-3B-SC
20kg C3/C4 BM11-C3/C4-20kg-3B-SC
30kg C3/C4 BM11-C3/C4-30kg-3B-SC
50kg C3/C4 BM11-C3/C4-50kg-3B-SC
100kg C3/C4 BM11-C3/C4-100kg-3B-SC
200kg C3/C4 BM11-C3/C4-200kg-3B-SC
250kg C3/C4 BM11-C3/C4-250kg-3B-SC
350kg C3/C4 BM11-C3/C4-350kg-3B-SC
500kg C3/C4 BM11-C3/C4-500kg-3B-SC
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2013.11 BM11 Rev9 F: +31 76 50 39481
4871 EN Etten-Leur info@zemic.nl
The Netherlands 1/4 www.zemic.nl
Type BM11 Load Cell
Detailed specifications BM11
Accuracy class C3 OIML R60 C3 OIML R60 C4
Output sensitivity ( = FS ) mV/V 2.0 ± 0.2
10, 20, 30, 50, 100, 200, 250, 350,
Maximum capacity ( Emax ) kg 5
500
Max.number of load cell intervals nLC 3000 3000 4000
Ratio of min. LC verification interval Y = Emax / vmin 10000 15000
Combined Error %FS ≤± 0.023 ≤± 0.0174
Minimum dead load Of Emax 0%
Safe overload of Emax 150 %
Ultimate overload of Emax 300 %
Zero balance of FS < ± 1.0 %
Excitation, recommended voltage V 5 ~ 12
Excitation maximum V 18
Input resistance Ω 460 ± 50
Output resistance Ω 350 ± 3.5
Insulation resistance MΩ ≥5000 ( at 50VDC )
Compensated temperature °C -10 ~+40
Operating temperature °C -35 ~ +65
Storage temperature °C -40 ~ +70
Element material Stainless steel
Ingress Protection (acc. to EN 60529) IP68
Recommended torque on fixation Nm M8:25 M10:50
bolts classification (optional)
ATEX II1G Ex ia II1C T4 II1D Ex iaD 20 T73°C II3G nL IIC T4
Wiring
Wiring:
Shielded, 6 and 4 conductor cable for all capacities.
Cable diameter: Ø5mm.
Standard cable length for 4 conductor cable: 3m and for 6 conductor cable: 6m.
Shield not connected to element
4-wire diagram 6-wire diagram
Input(+) Green Input(+) Green
Sense(+) Yellow
Output(-) Red Output(-) Red
Sense(-) Blue
Input (-) Black Input(-) Black
Output(+) White Output(+) White
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2013.11 BM11 Rev9 F: +31 76 50 39481
4871 EN Etten-Leur info@zemic.nl
The Netherlands 2/4 www.zemic.nl
Type BM11 Load Cell
Dimensions in mm
Dimension
d D H
Capacity
5kg 8.2 23 20
10kg 8.2 23 20
20kg 8.2 23 20
30kg 8.2 23 20
50kg 8.2 23 20
100kg 8.2 23 20
200kg 8.2 23 20
250kg 10.3 24 19
350kg 10.3 24 19
500kg 10.3 24 19
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2013.11 BM11 Rev9 F: +31 76 50 39481
4871 EN Etten-Leur info@zemic.nl
The Netherlands 3/4 www.zemic.nl
Type BM11 Load Cell
Available accessories
BJ-11-220-5-500kg foot
Stainless steel
Elastomer foot
Adjustable height
BM-11-401-5-500kg mount
Stainless steel mount
Easy load cell access
Self aligning construction
Lift-off protection
Controlled horizontal movement
BM-11-402-5-500kg Mount
BM-11-401 + Stay Rod
Stainless steel mount
Easy load cell access
Self aligning construction
Lift-off protection
Stabilized by stay rod
BM-11-400-10-200kg Tankmount
Stainless steel mount
Easy load cell access
Lift-off protection
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2013.11 BM11 Rev9 F: +31 76 50 39481
4871 EN Etten-Leur info@zemic.nl
The Netherlands 4/4 www.zemic.nl
