A supplement to FineScale Modeler magazine

Weathering
handbook
LEARN TWO
ESSENTIAL TECHNIQUES
The FSM staff shows you
how, step-by-step

Gallery: Master modelers

share the weathering secrets
behind their best models

for more on modeling:

No. 618209
www.FineScale.com
Weathering
handbook
By the staff of FineScale Modeler

©2008 Kalmbach Publishing Co. All rights reserved. This publication may not be
reproduced in part or whole without written permission from the publisher,
except in the case of brief quotations used in reviews. Published by Kalmbach
Publishing Co., 21027 Crossroads Circle, P.O. Box 1612, Waukesha, WI 53187-
1612. Printed in the U.S.A.

Cover photo: FSM’s Mark Hembree weathers his 1/35 scale Trumpeter KV-1 with pastels.

www.FineScale.com  A3
[ special section • WEATHERING ]

Three easy ways to use

powdered
pastels
Chalk one up for weathering
By Mark Hembree • Photos by Aaron Skinner

W
henever I wonder whether our readers are tired of hearing the same modeling tip, tech-
nique, or trick, I just check my “Q&A” mailbox. Along with baffling, arcane queries –
“What is the proper color of canteens for British regulars during the first Boer War?” – I find
indications that we can never explain too much. For anyone mystified by the phrase “I finished
with various touches of powdered pastels,” here’s the lowdown.
Easy to find, easy to use it in place, and grind it into the surface, 2. Blow (don’t brush) off
Colored powders such as Mig Pigments or Tamiya’s weathering the excess and tap it out of your brush, then use the brush to
powders can be used right out of the package, and they work great. feather out the edges of the stain, 3. In this, as in other weathering
However, artist’s pastels (available wherever art supplies are sold) applications, build it up a little at a time – don’t overdo.
can be just as effective. You do have to powder them yourself, but
that’s easy. Applying them isn’t difficult, either. Making mud
Mixing the right soil color can place your model in Tuscany or
Soots me fine Tennessee. To make mud, moisten a brush with thinner, dip it in
Perhaps the easiest use of pastels is a dry application to model the powder, then slop, splatter, or smear it on. Look at photos to
exhaust or smoke stains. Using coarse sandpaper, grind black pastel see how mud builds up in wheel wells, under fenders, etc. Keep
to make a little pile of powder, 1. Load a little on a dry brush, drop clean thinner handy to clear your brush or fix mistakes.

A4  FineScale Modeler Weathering Handbook

 Artist’s pastels are an easy and effective
way to weather any model. You’ll find them
wherever art supplies are sold.

2
Load the brush with powder, tap the brush to knock a little onto the sur-
face, then brush it where you want. Blow away excess powder to keep it
from showing up elsewhere.

3
Feathering the edges softens the effect, making it more believable.

1 4
Coarse sandpaper produces a fine, colorful powder. Too much? Add thinner and wipe it away with a clean brush, swab, or
your finger. Note how the pastel color emphasizes surface texture.

If you use the correct thinner, it won’t damage your finish coat.
On acrylic paint, use enamel thinner; on enamels, use alcohol or
acrylic paint thinner.
Again, don’t overdo. To illustrate, I used pretty bright mud
(about the color of the Atlanta infield!) and really laid it on thick –
too thick. If this happens to you, apply more thinner and wipe it
away with a clean brush, cotton swab, or even your finger, 4.

Dust to dust
The best material for modeling dust is, well, dust. Mix lighter
shades of your chosen soil and apply with a big, puffy brush, 5. To
show heavier accumulation, work the powder in with your brush.
Again, blow (don’t brush) off excess.
And there you have it – you’re “finishing with various pastels.” 5
You can use them on any model – ships, planes, cars, even figures. A dry application of dust-colored pastels can highlight details while realisti-
One rule is constant – take it easy. Subtle effects are the best. FSM cally making a vehicle look used.

www.FineScale.com  A5
[ special section
[ special • WEATHERING
section ] ]
• WEATHERING

WEATHERING Gallery Top Tips

A
s FSM travels to exhibitions throughout the Surprises and secrets are the stuff of weathering, a
year, we photograph our favorite scale models modeler’s sleight of hand that transforms molded
and chat with their builders. The question we plastic into illusions of worn metal, old rubber, or
most frequently ask is, “How did you do faded fabric.
that?” The answers often are surprising – and they can So, how do they do that? We got some surprising –
be enlightening. and enlightening – answers.

Czech VT-34
Tony Zadro, Marietta, Georgia
Tony dove into a motor-pool diorama by combining a 1/35 scale DML kit nished the Friulmodel metal tracks quickly with Blacken-It, which darkened
and Aires conversion to model a Czech VT-34 recovery vehicle featuring the tracks in 20 minutes and produced corrosion in about 24 hours. Artist’s
towbars and a boom crane that he scratchbuilt. Aside from his impressive oil washes of burnt umber and raw sienna dimmed the rust; dry-brushing
construction skills, what keys Tony’s scene is the masterful weathering of with steel caught high spots, depicting freshly exposed metal. The markings
diverse materials. Much of the weathering is done with Mig powdered pig- look like degraded paint because, prior to weathering, Tony applied dry
ments, applied dry, although Tony streaked the spade by diluting pigments transfers he had nicked up with a hobby knife. A final dusting of pastel
with water and flowing them on. Where chipped paint reveals bare metal, chalks was applied with a fluffy brush. Incidentally, the odd color matched
Tony brushed a 50:50 mix of acrylic steel and flat black, then painted over Tony’s photo references – possibly showing a makeshift combination of
it with diluted pigments that allowed the steel hue to show through. He tar- Soviet armor and aircraft interior paints.

A6  FineScale Modeler Weathering Handbook

DUKW, Philippines, 1945
Michael Bedard, Cottage Grove, Minnesota
Michael’s washes are Winsor & Newton artist’s oils mixed with Turpenoid. his 1/35 scale Italeri DUKW by brushing on chips and scratches of Vallejo
For darker colors, such as olive drab, he uses lamp black; for lighter colors, paints. He says, “I have evolved my technique to subdue the contrast,
such as Panzer yellow, he uses washes of raw umber. Michael favors which is usually not severe, by using lighter colors.” Heavier chips are a
model railroad weathering pastels from Stoney Mountain Classic Castings, mix of Winsor & Newton Ox Gall liquid and watercolors with Bragdon rust
brushing them on dry. He also uses Gamblin artist’s pigments, custom mix- pigment to depict bare metal in the midst of chips. A “dot filter” technique
ing the colors in a paper cup and applying them dry for dust and light dirt produces faded or corroded paint: Michael moistens the surface with
buildup. For heavier dirt, he mixes the pigments with Turpenoid and Turpenoid, applies small, multicolored dots of oils, then spreads and streaks
applies them more heavily; for caked-on mud, he mixes the pigments with the paint with a damp brush to add corroded or sunbaked shades as well
Hudson & Allen mud and Polly Scale airbrush thinner. Michael dinged up as warmth and depth to the olive drab finish.

Hawker sea fury

Leigh Eaton, Mission Viejo, California
Leigh likes Pro Modeller wash for weathering: “It’s water-based, designed poured on more water to dissolve the salt and reveal metallic chips. Leigh
for weathering, and it’s amazing. Slap it on, let it dry, then wipe off as credits Charlie Pritchett’s article on painting a 1/48 scale KV-2 (February
much as you want. You can leave it on as long as a month and it still 2008 FSM). “I followed his technique to the letter on my KV-1,” Leigh says,
comes right off.” He applies Doc O’Brien’s weathering powders with a “and that model has won three IPMS first places in as many months! The
round brush, dusting it onto the model, blowing off the excess, and correct- idea of painting the burnt umber base coat and building up paint layers
ing it with a cotton swab. He sprayed this Hobbycraft 1/48 scale Sea Fury has changed the way I weather and improved my builds immensely.” The
with automotive silver, dampened spots, sprinkled on rock salt masks, then markings put Leigh’s plane in Cuban action at the Bay of Pigs.
www.FineScale.com  A7
Hawker Sea Fury
Leigh Eaton, Mission Viejo, California

USS Buckley destroyer escort

Adrian Cisneros, Mexico City, Mexico
Adrian built Revell’s 1/240 scale destroyer escort as the USS Buckley, rusty rain streaks. Adrian applies pastel powders with cotton swabs,
arming it with scratchbuilt guns as well as photoetched-metal details from Microbrush precision applicators, or a fine paintbrush. “For rain and rust
Tom’s Modelworks, Gold Medal Models, and Eduard. His finishing tech- streaks, I recommend following the laws of physics and looking closely at
niques also set his ship apart. “On ships, I use pastels most often,” Adrian photograph references,” he says. Peeling finishes are oil-painted in brown,
says. “Secondly, I use inks, and only occasionally do I apply oils.” A vari- black, or sepia, and corrosion is accomplished with pastels. Adrian
ety of washes also finds its way aboard: a 50:50 mix of water and ink for achieves faded finishes by selectively airbrushing thinner, lighter colors
wood decks; in other places, a 70:30 mix of water and dark inks, such as (60:40 paint/thinner ratio). Another of Adrian’s individual touches is his
sepia; and touches of oil-based ink washes, such as a 70:30 mix of oils precise outlining of hatches, doors, and portholes with a .005mm sepia
and mineral spirits for die-cast pieces and a 50:50 mix of the same for stylograph (drafting pen).

Civil War Rail Guns

Richie Scanapico,
Anaheim, California
An ongoing interest in history, a love of
trains, and a fascination with rail-mounted
artillery – plus a few fortunate discoveries of
reference images on the Internet – inspired
Richie to build this unique model of Civil War
rail guns. He mounted cannons from
Verlinden on a combination of scratchbuilt
and model railroad accessories, including
Ozark Miniatures lanterns, jugs, and tie-
down plates. After slicing and chipping the
wood to replicate wear, he weathered it with
Age-It-Easy (from Micro-Mark). Water-based
washes (1 part Tamiya acrylic color to 9
parts water) and thinned artist’s oils, as well
as Pro Modeller’s premixed mud brown
weathering wash, are enhanced with touches
of artist’s pastel chalks. For streams of rust,
weathering powders from Bragdon
Enterprises were applied to bolt heads with a
small brush, then pulled down and slightly
spread out. Richie also mixed different
weathering powders with RustAll and soaked
bolt heads, chains, and other hardware to
achieve a rusty patina. The train wheels were
weathered with rust-colored powders as well
as real ferrous oxide – actually the product of
steel wool Richie soaked in water.

A8  FineScale Modeler Weathering Handbook

17cm Kanone E-100 Ausf B Farge
Rick Rasmussen, Decorah, Iowa
Winter camouflage graces Rick’s imaginary big gun, which he kitbashed metal. For rust stains and runs, he uses a toothpick to apply pastel shavings
together using Trumpeter’s Grille 17, two Maus turrets, and an E100 chas- to a chosen spot, then spreads it out with a flat, stubby brush, starting with
sis to make what he calls “Das Earsplitten Loudenboomer.” In a whitewash a bright rust color and gradually blending and fading it to browns and
technique he describes as “reverse dry-brushing,” Rick sprays the deepest tans. “The great thing about pastels and pencils is you can correct them
shadows flat black from below, then works from the top down with flat with an eraser,” he says, pointing out this method is for monochromatic
white, and follows by dry-brushing shades of what the tank’s base coat schemes. Rick prefers pastels and weathering powders to washes, and he’d
would be under the whitewash to depict wear, catching sharp edges with rather use Archer dry transfers, noting that decals show an unwelcome dif-
lighter-colored artist’s pencils. A regular No. 2 pencil replicates bare, worn ference in sheen when he’s weathering with pastels and powders.

StuG III
Chris Toops,
Lancaster, Ohio
Chris base-coated with various shades of
Model Master Panzer yellow enamel, let it
dry for a couple days, then applied a thin
coat of Tamiya white. He waited about 10
minutes, then selectively removed white
with a ½" brush dipped in Windex. After
the whitewash was dry, he sprayed a coat
of Pledge Future floor polish, let that dry,
and applied water-based artist’s gouache
washes of burnt sienna, burnt umber, raw
sienna, and lamp black to panel lines,
wheels, bolt heads, weld seams, etc. When
this layer had dried for a day, he removed
excess color with a damp brush. Chris
says, “The beauty of this medium is if you
don’t like the results, simply remove the
gouache with water and redo it.” A light
dry-brushing of bleached titanium artist’s
oil and a coat of Polly Scale clear flat fin-
ished the job. To model battle-damaged
skirts, Chris beat up Eduard photoetched-
metal accessories, drilling dents to depict
small-arms hits and adding creases with a
small screwdriver. A rusty gouache
depicted additional corrosion, while
scratches were applied with grimy black on
a Scotch-Brite pad or scribed with a hobby
knife and filled in with dark gouaches.

www.FineScale.com  A9
Eritrean T-55
David Ferris, Elkmont, Alabama
“The trick to realistic weathering is to take it slow and use several subtly dif- and wear with Humbrol Metalcote gunmetal and General’s soft charcoal
ferent oversprays and washes,” David says, citing greater control and pencil. He alternated pencils and paints with oversprays to vary the age of
fewer surprises. To individualize his Tamiya T-55, David modeled a sun- the marks, and applied several light washes of Humbrol thinner and artist’s
baked Eritrean tank in a border conflict with Ethiopia. He mixed Tamiya oils between each overspray. Oxidized streaks are heavily thinned Tamiya
flat green and flat olive green for a base coat and oversprayed a lighter yellow green mixed with Tamiya yellow, lightly airbrushed with rust pastels
shade of the same for scale effect. To maintain color intensity, David con- run down the center of the streaks. David painted the muffler a rosy pink,
sulted a color wheel he bought at an art store and added a drop of orange then beat it up with dark brown oils; the muffler guard was treated with
for every drop of white, using more thinner as he gradually brightened the pastels in Humbrol thinner. Final oversprays comprised Tamiya buff, Mig
overspray. About halfway through this process, he started adding chips pigments, and about 90 percent Tamiya thinner.

South Lebanese T-55

David Manter,
Fort Wayne, Indiana
David base-coated his 1/35 scale
Tamiya tank with Tamiya acrylics, then
faded the finish by spraying the center
of panels with the finish color lightened
by tan or light gray. Chipped paint is a
mix of gray/tan and dark brown Vallejo
colors applied with a tiny brush. The
first wash is 95 percent thinner (“not tur-
pentine!” he says) and Winsor &
Newton artist’s oils of Van Dyke brown
and lamp black, applied from the top
down. He followed with a slightly stron-
ger wash of the same for running gear,
then pinwashes of Van Dyke brown,
lamp black, and Indian red, “great for
fresh rust,” he says. Finally, he applied
Mig pigments with a No. 2 round
brush. “Plain paint thinner locks the
powder in place and softens the effect,”
he says. Light strokes with a wide, soft
brush produced the final blend.

A10  FineScale Modeler Weathering Handbook

1969 Camaro Z28
Charlie Dameron, Long Beach, California
The key to building a beater is “simple observation,” says Charlie. On his (“always a good rust tone”), detailed with Bragdon rust-tone powders,
Monogram 1/25 scale Z28, Charlie used a very thin (95 percent thinner) sprayed with Testors Dullcote, and sprinkled with a little more weathering
mix of titanium white artist’s oil and odorless mineral spirits to top surfaces, powder to give a flaking, layered look. The rusty door was base-coated
working from the center of the panels out to near the edges and soaking up with dark earth, and rubber cement was applied to future corroded spots.
pools or excess. He applied a darker filter of cadmium yellow below the After painting the door primer gray, Charlie removed the rubber cement to
centerline crease to depict areas less bleached by sun. Charlie prefers leave “nice, gaping holes in the paint,” he says. And there’s more – goug-
Bragdon weathering powders to pastels for modeling oil, grease, and dirt. ing, grinding, chipping, and scraping – much more than we can fit here to
Rusty headers are painted flat black, overcoated with Testors dark earth describe Charlie’s well-worn heap.

Ba-20 Armored Car

Rick Brownlee,
Merriam, Kansas
A self-described “contest modeler,” Rick
does things the hard way. His Russian
BA-20 armored car, loosely based on
the Alan 1/35 scale kit, has a scratch-
built toolbox and interior – and the only
thing not scratchbuilt under the hood is
the radiator. Rick hand-painted with
artist’s oils, capturing light like a mas-
terful painter with a fine-arts degree –
which, in fact, he is. He base-coated
with squeeze-bottle craft acrylics, then
mixed shadows and highlights with art-
ist’s oils. He uses water-based washes.
“It’s easier to remove a mistake if it’s
acrylic,” he says. His rust comprises
Indian red, raw umber, and yellow
ochre oils, dulled with an acrylic wash.
Rick encourages others to pursue new
techniques: “Leave your comfort zone,”
he advises, “and try something new.
You have to do it to learn it.” FSM

www.FineScale.com  A11
[ special section • WEATHERING ]

A salt and battery: Boba Fett’s

Slave 1 looks weather-beaten
onscreen and in miniature, thanks
to good old sodium chloride. It may
be bad for high blood pressure, but
salt is a trouble-free way to chip
paint on your models.

A12  FineScale Modeler Weathering Handbook

Add salt
and batter
your models
You can season any
vehicle with this
easy technique
By Aaron Skinner
Photos by Jim Forbes, Mark Hembree, and Aaron Skinner

S
alt as a weathering tool – I knew it could be used like a mask, and I
wanted to try it, but I had a lot of questions: How easy is it to use? How
realistic a finish will I achieve? Will I want to throw the model in the
trash when I’m done?
I figured the only way to answer those questions was to bite the bullet and
give this technique a whirl.Hunting through my stash, I spied the perfect
model to test this technique: AMT/Ertl’s Slave 1, Boba Fett’s mount in “The
Empire Strikes Back.” The life of an outer-space bounty hunter must be
rough, ’cause this ship is in dire need of a body shop. There’s paint peeling
from every surface!
After locating photos of a filming miniature, I was ready to beat up the ship.

1 2
Aaron assembled Slave 1’s major components. Basecoat: This is the color you want to see through the
Unhappy with the raised panel lines, he rescribed dilapidated paint. Aaron airbrushes Model Master
them. Aaron also shaved off the raised gun power Acryl light gull gray mixed with several drops of silver.
cables and replaced them with bent paper clips. The latter gave the base coat a slightly metallic sheen.
Tamiya putty filled gaps and sink marks.

www.FineScale.com  A13
 3 4
With the paint dry, Aaron assembles what he needs to assault the model – Slave 1’s spine (or nose) appeared to have no body paint left, so Aaron
water and table salt. Different forms of salt produce various effects as a applies ragged tape strips to serve as the base of the weathering. He
mask. A trip to the FSM coffee station netted a few packets of finely ground repeated this step in the area above the cockpit.
salt. A couple brushes are the only tools needed.

5 6
Aaron brushes water onto the surface of the model in the area to be With the other brush, Aaron applies salt to the wet area. Paint doesn’t
treated. A thin film works best, but water wants to bead on glossy paint – wear evenly, so try to keep the salt crystal placement random.
keep the brush handy.

7 8
Aaron experimented with ways to get the salt on the model, including It’s easy to move salt around on the model with a small brush. You can
pouring it on larger areas like the ridge. Another method was taking a refine the pattern and correct mistakes.
pinch and sprinkling it over the wet surface.

9 10
Satisfied with the pattern, Aaron set the main hull aside to dry. It looks bad Aaron airbrushes a 50:50 mix of Model Master Acryl RLM 02 gray and
right now – more like something you’d find on the ocean floor or the bot- white, taking care to ensure every part of the spacecraft, especially the
tom of a refrigerator. Don’t panic. It gets better. salted areas, got good coverage. Note: Make sure the salt is dry before
painting.

A14  FineScale Modeler Weathering Handbook

 Food for thought:
A pinch of this, 
a dab of that

Flush with the succesS of my last

foray to the company break room, I
11 12 wondered what other masking goodies
After the paint is dry and the masking tape is As salt comes off, it reveals the lighter gray base might be lurking there masquerading as
removed, Aaron takes a clean, soft cloth (an old coat in an uneven pattern. By a happy coinci- food additives. A quick scan revealed
cotton T-shirt works well) and scrubs off the salt. dence, salt water discolored the paint in a few another brand of salt, sugar, three arti-
You may need to scrub hard. The extra abrasion places, adding wear and tear to Slave’s finish. ficial sweeteners, creamer, and pepper.
can replicate scratched paint, but be careful not To see what would work, I painted a
to wear it down to the plastic. Ju 88 wing Tamiya silver and let it dry
overnight. Then, I brushed seven lines
of water, sprinkled on each condiment,
and set the wing aside to dry. A couple
hours and a coat of Tamiya flat black
later, I attacked the wing with a clean
cloth. Here’s what I learned:
Coarse salt peeled away easily and
left a realistic, jagged line. The big
crystals further scratched and beat up
the paint, enhancing the effect.
Sugar behaved like salt, masking
cleanly, rubbing off easily, and leaving
13 14 a realistically worn edge. The large
For the two-tone effect on the lower hull, Aaron Aaron achieved spotty patterns on the wing crystals similarly scratched the paint.
added a pattern of salt, then painted an equal humps by first airbrushing lightened Tamiya Splenda’s fine, irregular powder
mix of Polly Scale boxcar red and white. After deep green. After it dried, he wet the area and adhered well and produced an irregu-
the first coat dried, Aaron added salt around the tossed pinches of salt from several inches away. lar edge. But it wasn’t as tight a mask
first deposits and elsewhere, then painted full- as the salt or sugar, allowing a little
strength boxcar red. more black paint through resulting in a
slightly feathered edge.
Inside its pink package, Sweet’n
Low proved to be as fine as Splenda.
pepper But the crystals were more uniform in
salt Equal
Splenda size. The result was a soft edge that
looked more like worn than peeling
paint.
Equal provided the softest edge of
all, masking and rubbing off easily.
My only failure was creamer. It dis-
solved into a sticky lump that I have not
yet been able to remove. (Even using
my thumbnail, I scratched paint from
creamer
around the mask without disturbing the
hardened lump!)
I expected pepper to be a bust, too.
Not being crystalline, the large grains
didn’t stick well to the wet surface. But
Sweet’n Low it resulted in a suitably random pattern
of oddly shaped silver spots resembling
chips appropriate for larger scales.
And that’s just a quick trip to the
sugar company break room. Imagine all the
sugars, salts, and sprinkly things avail-
able at your nearest supermarket.
Experiment! You’re bound to find fine-
scale uses for foodstuffs.
Aaron sprinkled every condiment under the company kitchen sink on a Ju 88 wing to test masking – Aaron Skinner
qualities. Everything but the creamer worked pretty well. So, next time, order it black! FSM

www.FineScale.com  A15