ACO Product Catalogue

ACO Industrial Drainage

 ACO. The future
of drainage.

The ACO system chain provides drainage solutions which meet the future
needs of industries where hygiene is essential

In a food service environment, hot water, grease and organic waste must be counteracted by
more complex and sophisticated drainage concepts. ACO achieves this with intelligent system
solutions which optimise food safety, health and safety of employees and the protection of
water. Every ACO product within the ACO system chain safely controls water as it passes along
the chain to ensure it can be hygienically, economically and ecologically handled in a viable way.

collect: clean: hold: release:

Collect and Pre-clean and Protect and Pump, discharge and
remove process attenuate reuse

ACO system chain

2 in action
 
CONTENT
Introduction 4
General introduction 4
HygieneFirst 4
Hygienic design requirements 5
Hygienic design principles 6
Material - stainless steel and surface treatment 7
Standards and Certifications 8
System overview and benefits 9
Industrial Drainage selection guide 10

ACO gully 16
Introduction 18
ACO hygienic gully 142 20
ACO hygienic gully 157 34
ACO hygienic gully 218 48
ACO gully EG150 59
Gratings 61
Accessories 72
Flow rates and Construction heights 76

ACO channel 80
Introduction 82
ACO hygienic box channel 86
ACO vinyl box channel 90
ACO hygienic cast grating 93
ACO hygienic ladder grating 94
ACO mesh grating 98
ACO hygienic slot cover 100
Accessories for ACO box channels 102
ACO customized box channel 104
ACO slot channel 108
ACO customized slot channel 111
ACO modular box channel 125 120
Grating for ACO modular box channel 125 126
Accessories for ACO modular box channel 125 130
ACO modular box channel 200 131
Grating for ACO modular box channel 200 139
Accessories for ACO modular box channel 200 142
ACO modular slot channel 20 143
Accessories for ACO modular slot channel 20 148
ACO design channel 150

Flow rates and Construction heights 151

ACO pipe 156

Introduction 158
Straight pipes 160
Fittings 167
Flow rates 193
Operating pressures 195

Appendix 196
Transport & handling 198

ACO fire protective solution 200

Cleaning procedures 204

Typical installation examples 210

Material 226

3
  Introduction
General introduction

General introduction
Introduction
Introduction

ACO is one of the World’s leading ACO drainage is used in applications



drainage specialists with 60 years’ anywhere where hygienic, corro-

experience gained across a wide range sion resistant and durable drainage
of sectors. Our passion for producing performance is essential:
high performance products has led us to §§ Professional kitchens
make major investments in research and §§ Food processing facilities
development.
§§ Brewing, bottling and canning plants

We are working in partnership with §§ Chilled warehouses

commercial facility owners, managers and §§ Laboratories
operators. We are continuously developing §§ Chemical industries
our products and enhancing our expertise. §§ Pharmaceutical industries
We understand the critical role that
§§ Restaurants
drainage plays in a successful business.
§§ Schools
Our product portfolio includes items §§ Hospitals
which are fully compliant with the highest §§ Hotels
hygienic requirements. We also have a §§ and others
full understanding of the food industry’s
own standards such as HACCP and we
work with bodies including the European
Hygienic Engineering and Design Group
(EHEDG).

As one of the World’s leading commercial As a result, many drainage systems Our HygieneFirst philosophy represents our
drainage specialists, The ACO Group are not designed well, which leads to commitment to delivering products that
understands the critical role that drainage inefficiencies, costly on going cleaning provide ultimate hygienic performance.
plays in a successful commercial food and maintenance. In worst case scenario We design intelligent drainage solutions
preparation business. We appreciate that it can result in food contamination, closure that minimize operational costs without
food safety, hygiene and cost control are of a facility and even loss of a business. compromising food safety.
all vital factors, yet we also understand As the company that’s driving the future of
that for many, drainage is out of sight and drainage, we are determined to change this
out of mind. by raising the profile of hygienic drainage
and improving standards across every part
of the process.

4
 Introduction
Hygienic design requirements

Hygienic design requirements

Introduction
ACO offers sustainable, integrated NSF International and to research-led product development
drainage systems which are designed to ACO has become the first and only which ensures its products deliver
protect business, the environment and drainage company to obtain 14159-1 - optimum hygienic performance.
ultimately public health. Our aim is to Hygiene Requirements for the Design
constantly improve every aspect of safety, of Meat and Poultry Processing Equipment EHEDG
hygiene and functional performance. certification for its products from NSF ACO hygienic drainage fulfils stringent
We believe that our systems and services International. hygienic requirements to prevent harmful
are truly unique, delivering unparalleled bacteria contamination. We apply
benefits to everyone involved in project The certification has been awarded to ACO relevant hygienic design principles that
delivery or subsequent operation. in recognition of the hygienic performance are reserved for food contact surfaces
of its drainage systems and products, and EN 1672, EN ISO 14159 and EHEDG
its compliance with the strict standards documents No. 8, 13 and 44 to the design
and procedures of the NSF. It also of our drainage products.
underlines ACO’s ongoing commitment to
the very high standards of manufacturing

Hygienic design

Full drainability
The outlet is in lowest position.
Sleek slope functionality provides a fully drainable solution.

Round internal corners

Minimum radius of internal corners is 3 mm.

Hygienic joints
Butt welds are fully welded.
Metal-to-metal contact at non-disassembled joints is avoided.
Sealed joints are designed to prevent accumulation of soil and bacteria.

Edge in-fill
The channel frame edge is filled with a waterproof material.

Material

Stainless steel grade min. 1.4301 according to EN 10088 (304 according to AISI).

Fully pickled and passivated or electropolished.

5
 Introduction
Hygienic design principles

Hygienic design principles

Introduction

Hygienic design
Introduction

All internal radii equal or larger Hygienic joints: deep-drawn

than 3 mm which greatly increases body ensures smooth contours
cleaning effectiveness eliminating crevices that can
harbour dangerous bacteria

Dry sump design, completely

Edge in-fill ensures stable and
drainable - eliminating stagnant
durable transmission between
water, smells, microbial growth
the gully and surrounding floor
and potential chemical hazards.
and helps to minimise the risk of
floor cracks which could harbour
microorganism

Cleaning performance

6
 Introduction
Hygienic design principles 

Material

Introduction

Stainless steel Surface treatment Finishes used by ACO include:

Stainless steel is the name given to a The process cutting, forming and welding Pickle passivation (acid treatment)
wide range of steels which have the of stainless steel will introduce impurities All ACO drainage is pickle passivated by
characteristics of greatly enhanced into the surface of the material and immersing products in a series of acid
corrosion resistance over conventional unless the appropriate action is taken, baths. This is a fundamental requirement
mild and low alloy steels. The enhanced the material will begin to corrode and for removing iron embedded particulates
corrosion resistance of stainless steel ultimately fail in service. Therefore, after introduced in the fabrication process and
essentially comes from the addition of at fabrication, it is vital that stainless steel is also for restoring the chromium depleted
least 11% of chromium, however, most treated with the correct surface treatment regions generated by the welding process.
commonly used stainless steels contain to ensure it is fully corrosion resistant. ACO has one of the largest and most
around 18% of chromium. Other significant By applying pickle passivation as the advanced pickle passivation installations
alloying elements include nickel and for primary surface treatment, the corrosion in Europe which ensures the optimum
superior corrosion resistant properties, resistance of stainless steel can be fully corrosion resistance of our products.
molybdenum. restored to its original state, ensuring long
and reliable life performance together with Electropolishing (electrochemical process)
Stainless steel has the following unique the required aesthetic appearance. After pickle passivation, some products
advantages: are then immersed in an electrolytic fluid
§§ High corrosion resistance in which the products become the anode
§§ Nonporous, easy to clean and disinfect of a direct current electrical circuit. This
§§ Aesthetically pleasing process is characterized by a selective
§§ Resistant to extreme temperatures attack of the surface of the components
and thermal shock whereby upstanding roughness is
§§ Coefficient of linear expansion similar preferentially dissolved and will yield
to concrete a progressively smoother, brighter
§§ 100% recyclable material surface. All hygienic box channel grates
are electropolished as a standard.
ACO drainage is manufactured from
austenitic stainless steel, grades Brushing (mechanical process)
1.4301 or 1.4404 according to ACO channels have a brushed upper edge
EN 10088 (304 or 316L according for aesthetic reasons.
to AISI) and is ideal for applications
including food processing, leisure, dairy,
brewing, pharmaceutical, chemical and
petrochemical industries.

7
  Introduction
Standards and certifications

Standards and Certifications

Introduction

ACO gully and ACO channel

Introduction

ACO gully and ACO channel ranges are ACO fire protective kit is tested according


designed, manufactured, tested and to EN 1366-2 (Fire resistence tests

certified in accordance with EN 1253. for service installations) and classified
Furthermore ACO modular channels are according to EN 13501 (Fire classification
also certified in accordance with EN 1433 of construction products and building
and they are CE marked. elements).

We apply the relevant hygienic design

principles reserved for food contact
surfaces EN 1672, EN ISO 14159
and EHEDG documents No. 8, 13, 44
and NSF International.

ACO pipe

The ACO pipe push-fit system is classified Special certificate of fire resistance
and certified as non-combustible product for coated pipes (no. CSI PK-13-083)
and is manufactured in compliance with is available.
EN 1124. This standard classifies the ACO
pipe systems as class A1 fire resistant
(highest rating).

ACO pipe systems are certified also

by SITAC authority as fire resistant
(cert. no. 0410-01).

8
 Introduction
System overview and benefits 
System overview and benefits

Introduction

Benefits
ACO provides solutions which optimise food safety, employee´s health and safety and water protection. Every ACO product safely
controls the water to ensure that it can be hygienically, economically and ecologically managed in a viable way.

Food safety Cost control Health & Safety

§ § ACO hygienic drainage fulfills § § ACO drainage systems can be easily § § For additional safety in high risk
hygienic requirements to prevent maintained, reducing associated areas that require heavy water
harmful bacteria contamination. cleaning costs, thanks to their usage, a slip resistant grating is
We apply relevant hygienic design functional design and cleaning available.
principles reserved for food contact recommendations which have been § § Each component of the drainage
surfaces as recommended by EHEDG. developed in partnership with system is easy to remove and clean,
§§ Our product design ensures minimal premium cleaning agent suppliers. and there are no sharp edges for
build-up of food particles and debris § § ACO’s advanced manufacturing optimum employee safety.
as well as a safe connection with the technologies ensure durability and our § § ACO drainage products have a fire
surrounding floor to minimise any special surface treatment guarantees resistant solution certified according
opportunity for bacteria to grow corrosion resistance. Our systems to EN 136.
throughout the drainage system. perform effectively at all times and
§§ Sleek slope function and hygienically keep business disruption to a minimum.
designed products ensure our system §§ We provide expertise in drainage
is fully drainable, eliminating the system planning, correct installation and
stagnant odour of waste water. creating a safe connection with the
surrounding floor to avoid unnecessary
costs.

9
  Introduction
Industrial Drainage selection guide

Industrial Drainage selection guide

Introduction
Introduction

Application


The layout of the drainage system as well To specify an appropriate drainage system
as the design of drainage elements has an for a particular application, the zone of
impact on future operational effectiveness operation and amount and frequency of
and on costs. This guide offers a range of water used is crucial.
basic areas which need to be considered
when specifying a drainage system.

Production process/ Zones with high risk Zones with medium or low Zones without direct risk
Cleaning process for food safety risk for food safety for food safety

§§ Hygienic design - one piece §§ Hygienic design - connections §§ Hygienic design is

solution without connections; and mesh gratings could be recommended for easy
ladder or cast gratings or considered if cleaning and cleaning and maintenance.
slot covers sanitation procedures allow A combination of products
Wet production process/ could be considered for easy
Wet cleaning process layout design

§§ High retention - high flow rate §§ High retention - high flow rate §§ High retention - high flow rate

§§ Slip resistance - high §§ Slip resistance - high §§ Slip resistance - high

requirement requirement requirement

§§ Hygienic design - one piece §§ Hygienic design - connections §§ Hygienic design is

solution without connections; and mesh gratings could be recommended for easy
ladder or cast gratings or considered if cleaning and cleaning and maintenance;
slot covers sanitation procedures allow combination of products
Dry production process/ could be considered for easy
Wet cleaning process layout design

§§ High flow rate §§ High flow rate §§ High flow rate

§§ Slip resistance - medium §§ Slip resistance - medium §§ Slip resistance - medium

requirement requirement requirement

§§ Hygienic design - one piece §§ Hygienic design - connections §§ Hygienic design is

solution without connections; and mesh gratings could be recommended for easy
ladder or cast gratings or considered if cleaning and cleaning and maintenance.
Dry production process/ slot covers sanitation procedures allow A combination of products
Controlled wet cleaning could be considered for easy
process layout design

§§ Medium to low flow rate §§ Medium to low flow rate §§ Medium to low flow rate

§§ Odour proof cover §§ Odour proof cover §§ Odour proof cover

10
 Introduction
Industrial Drainage selection guide 

Drainage type

Introduction

Based on the basic application, the type
of drainage needs to be selected according
to the layout of the operational space and
technology employed.

Point drainage Linear drainage

Material resistance

The chemical mixture of the waste water ACO drainage is manufactured from Besides stainless steel, drainage products
from the process and/or from the cleaning austenitic stainless steel; grades also contain sealing materials:
as well as temperature of the final mixture 1.4301 or 1.4404 according to
influences the material resistance of the EN 10088 (304 or 316L according ACO gullies – all the seals are made
drainage system. to AISI) and is ideal for applications of NBR (acryl nitrile -butadiene rubber)
within food processing, dairy, brewery, or SBR (styrene-butadiene rubber)
commercial kitchen, pharmaceutical, ACO box and slot channels – flange
chemical, petrochemical industries and connection seals are made of NBR
leisure. (acryl nitrile -butadiene rubber)
ACO modular box and slot channels –
flange connection seals are made of NBR
(acryl nitrile -butadiene rubber)
ACO pipes – socket seals can be made
from either EPDM (ethylene propylene
diene monomer) or FPM (fluoroelastomer)
– Viton ®.

For details of material resistance see

page 226 or contact our Sales/Technical
department.

11
 Introduction
Industrial Drainage selection guide
Introduction

Floor structure and finish

Introduction

Depending on the composition of the floor Depending on the floor finish; the
construction; the appropriate type of gully appropriate edge of the channel or gully
or channel should be selected. If there is top should be selected.
insulation in the floor structure, the O-ring
needs to be removed from the friction
ring, which will allow the water from the
insulation to be drained to the gully body.

Channels + Telescopic gullies Fixed height gully

Floor finish Tiled, concrete or resin Vinyl Tiled Tiled, concrete or resin
floor (thin bed installation) floor
Channel or gully
Standard edge Vinyl edge Extended edge Standard edge
edge

Channel or gully
top drawing

Waterproof
Connected to gully body Connected to channel / Independent of the gully
membrane
gully top
connection

Telescopic adjustable Telescopic adjustable Fixed height gully

Gully body type
Adhesive bonding flange or mechanical clamping flange Location flange

Gully body picture

Installation example

12
 Introduction
Industrial Drainage selection guide 

Retention capacity

Introduction

Depending on the application, the
appropriate retention capacity should be
considered.

Overall Overall depth

width of channel
of channel H2 [mm]
Wo [mm]

60

800 100

600
140
500
180
400
300
200

120 l
Overall Retention
length 5000 4000 3000 2000 1000 0 50 100 150 200 250 300 capacity
of channel of channel
Lo [mm] [l]

Example: channel length 4000mm, width 400mm, depth 100mm, retention capacity 120 l.

Channel geometry

Based on the retention capacity considered, the outlet position as well as the position
as well as the floor structure, the particular of the outlet and the height of the endcaps
dimensions of a channel or gully top (for has to be defined.
telescopic solution) need to be specified.
For the channel a construction height at

Lo
Wo Wo Li
Wi Wi L1
H2

H3
H1
H2
F

øD øD øD

13
  Introduction
Industrial Drainage selection guide
Introduction

Flow rates
Introduction


Flow rates reflect the system´s ability

to constantly drain a certain amount
of water. Flow rate is generally defined
by the ACO gully size.

Flow rates

Outlet position Gully type Outlet diameter [mm] Minimal flow rate [l/s]
70/75 1.4
142
100/110 1.6
70/75 2.7
157
100/110 3.5
Vertical outlet
100/110 5.0
218
150/160 5.0
70/75 1.2
EG150
100/110 1.2
70/75 1.4
142
100/110 1.6
70/75 2.6
Horizontal outlet 157
100/110 2.8
218 100/110 4.4
EG150 70/75 1.2

Flow rates are measured according to EN 1253. Flow rate performance is without silt basket (flow rates with empty silt basket are
approximately 15% lower than the values stated)

Accessories

For the collection of solid parts,

the gully or channel should be fitted
with a silt basket.

Telescopic connection Telescopic connection

without flange for with flange for waterproofing
waterproofing

ACO gully EG150 ACO hygienic gully 142 ACO hygienic gully 157 ACO hygienic gully 218

Accessories delivered as standard with the gully

§§ Friction ring §§ Friction ring §§ Friction ring §§ Friction ring
§§ FAT §§ FAT §§ FAT
§§ FAT support §§ FAT support §§ FAT support

Optional accessories
§§ Sieve §§Silt basket §§ Silt basket §§ Silt basket
§§ FAT with silt basket for fixed height gully 0.3 l for vertical gully 0.6 l for vertical gully 1.4 l
§§ FAT §§Silt basket §§ Silt basket §§ Silt basket
for telescopic gully 0.4 l for horizontal gully 0.3 l for horizontal gully 0.7 l

14
 Introduction
Industrial Drainage selection guide 

Gratings

Introduction

For selecting the appropriate grating, the
following properties have to be considered:
§§ Hygiene (cleanability)
§§ Load class
§§ Slip resistant

Cast Ladder Slot Mesh

grating grating cover grating
Slip resistant Slip resistant Plain Plain Slip resistant Plain
Potential for slip -
Low Low Moderate Low Low Moderate
Pendulum test BS 7976-2

Slip resistance classification -

R13 R11 R9 R11 R11 R9
Ramp test DIN 51130
R 50 R 50 R 50
Load classes M 125 M 125 M 125 M 125 L 15 L 15
N 250 N 250 N 250

Load class

Though it is recommended to avoid traffic

across the drainage system, to minimize
the risk of floor/drainage connection
failures from dynamic loading, the proper
load class defined by the grating has to
be considered based on the defined traffic
during all future operations.

Load class Load class according to Description

Application EN 1253

Areas with light vehicular traffic, such as:

L 15
§§ Commercially used premises and public areas

Areas with vehicular traffic, such as:

R 50
§§ Commercially used premises and factories

Areas with vehicular traffic such as:

M 125
§§ Workshops, factories & car parks

Heavy duty industrial areas subject to forklift traffic, such as:

N 250
§§ Food processing areas, chemical or process plants

15
  ACO gully
Content
ACO gully


16
 ACO gully
Content

ACO gully Page

Hygienic design 18
Introduction
System overview 19

Fixed height – vertical outlet 20

Fixed height – horizontal outlet 22

Telescopic – vertical outlet 24

ACO hygienic gully 142
Telescopic – horizontal outlet 27

Gully top – telescopic 30

Raising piece – telescopic 33

        
Fixed height – vertical outlet 34

Fixed height – horizontal outlet 37

Telescopic – vertical outlet 39

ACO hygienic gully 157
Telescopic – horizontal outlet 42

Gully top – telescopic 45

Raising piece – telescopic 47

Fixed height – vertical outlet 48

Fixed height – horizontal outlet 50

Telescopic – vertical outlet 51

ACO hygienic gully 218
Telescopic – horizontal outlet 54

Gully top – telescopic 56

Raising piece – telescopic 58

Telescopic – vertical outlet 59

ACO gully EG150
Telescopic – horizontal outlet 60

Gratings for gully top 200 x 200 61

Gratings for gully top 250 x 250 64

Gratings Gratings for gully top 300 x 300 67

Gratings for vinyl top ø170 70

Gratings for vinyl top ø222 71

Accessories for ACO hygienic gully 142 72

Accessories for ACO hygienic gully 157 73

Accessories
Accessories for ACO hygienic gully 218 74

Accessories for ACO gully EG150 75

Flow rates and construction

Flow rates and construction heights 76
heights

17
 Introduction
Hygienic design

Hygienic design

ACO hygienic drainage fulfils strongest ACO gully hygienic features:

hygienic requirements to prevent harmful § Full drainability
bacterial contamination. We apply the § Internal radii equal or larger than 3 mm
relevant hygienic design principles reserved § Hygienic joints
for food processing equipment EN 1672, § Edge infill
EN ISO 14159, EHEDG document § Stainless steel grade min. 1.4301
No. 8, 13, 44. according to EN 10088
(304 according to AISI)
ACO gully

§ Fully pickled and passivated

Hygienic slip resistant gratings

All internal radii equal or Hygienic joints: deep-drawn

larger than 3 mm which body ensures smooth contours
greatly increases cleaning eliminating crevices that can
effectiveness harbour dangerous bacteria

Edge in-fill ensures stable and

durable transmission between
the gully and surrounding floor
and helps to minimize risk of
floor cracks which could harbour
Full drainability: Dry sump microorganism
design, completely drainable
- eliminating stagnant water,
smells, microbial growth and
potential chemical hazards.

Foul air trap without overlapped

joints

Foul air trap internal corners

smooth and rounded

18
 Introduction
System overview

System overview

ACO gully range is available in a number Fixed height gullies are convenient and
of versions featuring different flow rates, free-standing units which are suitable for
grating designs, sizes and spigot outlet cementitious, resin or tiled floors.
diameters to suit various applications.
Telescopic gullies can be installed either
The floor construction and depth together with a gully top or ACO channel in most
with the use of any waterproofing flooring constructions, including floors
membrane play an important role in the with waterproofing membranes.

ACO gully
selection of the appropriate type of gully.

The ACO gully range is available with

vertical or horizontal spigot outlets.

Fixed height solution Telescopic solution

1 1

2 2

3
6

4
8

1 Gratings
2 Silt basket
3 Foul air trap
4 Foul air trap support
5 ACO gully body
6 Gully top 5
7 Friction ring
8 ACO EasyFix levelling feet

19
 ACO hygienic gully 142
Fixed height – vertical outlet

Fixed height – vertical outlet

Product information
Fixed height gully can be specified as a point § Tested and certified according
drainage in areas where waterproofing to EN 1253
is independent of the gully body. Those § Fire tested and certified solution available
gullies can be combined with different for classes EI 90 – EI 180 (EN 13 501-2)
grates depending on requested load class. § Outlet diameter DN 70/DN 100
(75 mm or 110 mm O.D.)
HygieneFirst features § Gully top frame size: 200 x 200 mm
§ Hygienic design following EN 1672, § Wide range of gratings for load class
ACO gully

EN ISO 14159 and EHEDG document No. L 15, R 50, M 125 or N 250 (EN 1253)
8, 13 and 44 including slip resistant solution
§ Available in 1.4301 (304) or § Adjustable EasyFix levelling feet
1.4404 (316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)
§ Protective cover available.
See page 224 for more details

Order information

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Standard edge
□200
25

1.4301 414700
135

Without FAT
233

1.4404 414800
Ø75
Ø142 200 x 200 75

1.4301 414701

With FAT

1.4404 414801

□200
25

1.4301 414702
135

Without FAT
233

1.4404 414802
Ø110
Ø142 200 x 200 110

1.4301 414703

With FAT

1.4404 414803

Gratings for gully top 200 x 200 mm Page 61 Accessories for ACO hygienic gully 142  Page 72
20
 ACO hygienic gully 142
Fixed height – vertical outlet 
Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Extended edge

□300
□200 20
135

1.4301 414744
233

ACO gully
Ø75


Ø142 200 x 200 75 With FAT

1.4404 414844

□300
□200
20
135

1.4301 414745
233

Ø110
Ø142 200 x 200 110 With FAT

1.4404 414845

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 142  Page 72
21
 ACO hygienic gully 142
Fixed height – horizontal outlet

Fixed height – horizontal outlet

Product information
Fixed height gully can be specified as a § Tested and certified according
point drainage in areas where waterproof- to EN 1253
ing is independent of the gully body. § Outlet diameter DN 70/DN 100
Those gullies can be combined with (75 mm or 110 mm O.D.)
different grates depending on requested § Gully top frame size: 200 x 200 mm
load class. § Wide range of gratings for load class
L 15, R 50, M 125 or N 250 (EN 1253)
HygieneFirst features including slip resistant solution
ACO gully

§ Hygienic design following EN 1672, § Adjustable EasyFix levelling feet

EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or
1.4404 (316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)
§ Protective cover available.
See page 224 for more details

Order information

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Standard edge
□200

1.4301 414704
25

105
143
135

Without FAT
Ø75

142
149
1.4404 414804

200 x 200 75

1.4301 414705

With FAT

1.4404 414805

□200

1.4301 414706
25

120
175
135

Without FAT
Ø110

142
1.4404 414806
181

200 x 200 110

1.4301 414707

With FAT

1.4404 414807

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 142  Page 72
22
 ACO hygienic gully 142
Fixed height – horizontal outlet 
Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Extended edge

□300
□200

20
105
143 1.4301 414746
133

Ø75

142
149

ACO gully
200 x 200 75 With FAT


1.4404 414846

□300
□200
20

120
175
135

1.4301 414747
Ø110

142

181

200 x 200 110 With FAT

1.4404 414847

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 142  Page 72
23
 ACO hygienic gully 142
Telescopic – vertical outlet

Telescopic – vertical outlet

Product information
Telescopic gully can be combined either § Tested and certified according
with gully tops or with linear drainage to EN 1253
channels. § Fire tested and certified solution
available for classes EI 90 – EI 180
Telescopic solution enables height and (EN 13 501-2)
rotational adjustment of connected gully § Suitable for all floor types including
top or channel. Gullies are equipped with vinyl flooring
flanges for connection of waterproof mem- § Outlet diameter DN 70/DN 100
ACO gully

brane. (75 mm or 110 mm O.D.)

§ Gully body with location flange or
HygieneFirst features integrated membrane flange for either
§ Hygienic design following EN 1672, adhesive bonding or mechanical clamp
EN ISO 14159 and EHEDG document § Telescopic friction ring included
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)

Order information

Outlet Item
Type of flange Foul air trap Material
diameter number
ø [mm]
Ø164

1.4301 414708
109
205

Without FAT

1.4404 414808

Location flange 75
Ø75
Ø142 1.4301 414709

With FAT

1.4404 414809

24
 ACO hygienic gully 142
Telescopic – vertical outlet 
Outlet Item
Type of flange Foul air trap Material
diameter number
ø [mm]
Ø344

1.4301 414710

109
205
Without FAT

1.4404 414810
Ø75
Ø142

Adhesive
75

ACO gully
bonding flange


1.4301 414711

With FAT

1.4404 414811

Ø344

1.4301 414712
109
205

Without FAT

1.4404 414812
Ø75
Ø142

Mechanical
75
clamping flange

1.4301 414713

With FAT

1.4404 414813

Ø164

1.4301 414714
109
208

Without FAT

1.4404 414814

Ø110
Location flange 110
Ø142
1.4301 414715

With FAT

1.4404 414815

Accessories for ACO hygienic gully 142  Page 72

25
  ACO hygienic gully 142
Telescopic – vertical outlet

Outlet Item
Type of flange Foul air trap Material
diameter number
ø [mm]
Ø344

1.4301 414716

109
Without FAT

102
1.4404 414816
Ø110
Ø142
Adhesive
110
bonding flange
ACO gully

1.4301 414717


With FAT

1.4404 414817

Ø344

1.4301 414718
109

Without FAT
102

1.4404 414818
Ø110
Ø142
Mechanical
110
clamping flange

1.4301 414719

With FAT

1.4404 414819

Accessories for ACO hygienic gully 142  Page 72

26
 ACO hygienic gully 142
Telescopic – horizontal outlet

Telescopic – horizontal outlet

Product information
Telescopic gully can be combined either § Tested and certified according
with ACO gully top or ACO channel in most to EN 1253
flooring constructions. § Suitable for all floor types including
vinyl flooring
Telescopic solution enables height and § Outlet diameter DN 70/DN 100
rotational adjustment of connected gully (75 mm or 110 mm O.D.)
top or channel. Gullies are equipped with § Gully body with location flange or
flanges for connection of waterproof integrated membrane flange for either

ACO gully
membrane. adhesive bonding or mechanical clamp
§ Telescopic friction ring included
HygieneFirst features § Adjustable EasyFix levelling feet
§ Hygienic design following EN 1672,
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)

Order information

Outlet Item
Type of flange Foul air trap Material
diameter number
ø [mm]
Ø164

1.4301 414720
77
115

Without FAT
109

Ø75

142 1.4404 414820

151

With location
75
flange
1.4301 414721

With FAT

1.4404 414821

Ø344

1.4301 414722
77
109
115

Without FAT
Ø75

142
149
1.4404 414822

With adhesive
75
bonding flange

1.4301 414723

With FAT

1.4404 414823

Accessories for ACO hygienic gully 142  Page 72

27
  ACO hygienic gully 142
Telescopic – horizontal outlet

Outlet Item
Type of flange Foul air trap Material
diameter number
ø [mm]

Ø344

1.4301 414724

77
109
115

Without FAT

Ø75
142
149 1.4404 414824

With mechanical
75
clamping flange
ACO gully


1.4301 414725

With FAT

1.4404 414825

Ø164
1.4301 414726

Without FAT
147
92
109

Ø110

142
1.4404 414826
181
With location
110
flange

1.4301 414727

With FAT

1.4404 414827

Ø344

1.4301 414728
92
147

109

Without FAT
Ø110

142

181 1.4404 414828

With adhesive
110
bonding flange

1.4301 414729

With FAT

1.4404 414829

Accessories for ACO hygienic gully 142  Page 72

28
 ACO hygienic gully 142
Telescopic – horizontal outlet 
Outlet Item
Type of flange Foul air trap Material
diameter number
ø [mm]

Ø344

1.4301 414730

92
Without FAT
147
109

142 Ø110

181 1.4404 414830

With mechanical
110
clamping flange

ACO gully

1.4301 414731

With FAT

1.4404 414831

Accessories for ACO hygienic gully 142  Page 72

29
 75 - 110 75 -
ACO hygienicØ125
gully 142
Gully top – telescopic
Ø125

8
Gully top – telescopic

8
Product information
Gully top can2be combined with telescopic § Tested and certified according
gully. Different gully top types are
□148 to EN 1253
28
available depending on floor structure. § Gully top frame size: 200 x 200 mm
□148 § Wide range of gratings for load class
HygieneFirst
8
features L 15, R 50, M 125 or N 250 (EN 1253)
85 - 120 85 - 120

§ Hygienic design following EN 1672, including slip resistant solution

EN ISO 14159 and EHEDG document § Adjustable EasyFix levelling feet
Ø125
No. 8, 13 and 44
ACO gully

§ Available in 1.4301 (304) or 1.4404

Ø125
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Protective cover available.
8

See page 224 for more details

8

Order information
a
□200 Gully top type Gully top size Material Item
a □ [mm] number
25

□200
79

25

Ø125
79

1.4301 414732
Ø125

Standard edge 200 x 200

1.4404 414832

b
□300
□200
b
□300
25

□200
79

1.4301 414734
20

25

Ø125
79

20

Ø125
Extended edge 200 x 200

1.4404 414834

□300
□200

□300
25

□200
79

20

25

Ø125
79

20

Ø125

30
 ACO hygienic gully 142
Gully top – telescopic 
5 Gully top type Gully top size Material Item
□148 □ [mm] number
5 □300
□□148
8/11

200
91

Ø125

25
8/11
91

1.4301 414735
79

20
Ø125

Ø125

Extended top with

200 x 200
drainage holes
□500 □500

ACO gully
1.4404 414835


1
□149
18
□149
8
75 - 11075 - 110

Ø125

Ø125
Plastic top with stainless *
149 x 149 Plastic 414903
steel grating (K3)
5
8

4 □148
□200
8

□150
8/11
91

Ø125

2
125

28 □148

Ø125
□148
8
85 - 12085 - 120

□500

Ø125
MEKU top with stainless *
414904
8

148 x 148 Plastic

steel grating (K3)
Ø125

1
□149
8
8

3
8

75 - 110

□148
8

a Ø125

□200
a
115

□200
25
81

Ø125
Square top with stainless *
25

148 x 148 1.4301 414905

steel grating (K3)
81

Ø125

Ø125

2
8

□148
8

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
85 - 120

b Ø125
6 □300
b Gratings
□200 for gully top 200 x 200 mm  Page 61
□271
□148
□ 300 31
□140
200
20
81

20

8
 5
4 □148

 ACO hygienic
□200 gully 142
□150
Gully top – telescopic

8/11
91
Ø125

125
Gully top type
5 Gully top size Material Item
4 Ø125 □148□ [mm] number
□200
□150

8/11
□500
91
Ø125

125
8
Ø125

Plastic top with stainless 1 *

150 x 150 Plastic 414906
steel grating (K3)

□500
□149
8

3
ACO gully

75 - 110
8

□148


1 Ø125

5 □149
115

8
□148

75 - 110 8
3
8/11

Ø125
91

□148Ø125
8
Ø125

Plastic thin-bed top with 2 *

115 8

sliding frame and stain- 148 x 148 Plastic 414907

less steel grating (K3) □148
8 8
Ø125
□500

85 - 120

2
8

Ø125
6
□148
1 □271 8
□148
□140□149
20

8
858 - 120
115
75 - 110

Ø125
6 Ø125

□271Ø125
□148 Square top with sanded
a
*
□140 flange and stainless 148 x 148 1.4301 414909
20

steel grating (K3) □200

8
25
8
115

81

Ø125 Ø125

a
2 □200

□148
25

* Hygienic design 8following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
81

Ø125
85 - 120

Ø125
b
□300
□200
81

20

Ø125
8

b
□300
□200
Gratings for gully top 200 x 200 mm  Page 61
32 a
81

20

□200
Ø125
 ACO hygienic gully 142
Raising piece – telescopic

Raising piece – telescopic

Product information
Raising piece can be used for floor struc- § Tested and certified according
tures where multi waterproofing is needed to EN 1253
(heat insulation) or where construction § Suitable for all floor types including
height of the slab needs to be increased. vinyl flooring
§ Variety of flanges for membranes
HygieneFirst features § Telescopic friction ring included
§ Hygienic design following EN 1672,
EN ISO 14159 and EHEDG document

ACO gully
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated

Order information

Item
Type of flange Material
number
Ø164

1.4301 414736
Location flange
75

Ø125 1.4404 414836

Ø142

Ø344
31
44

Ø125
1.4301 414737

Adhesive bonding flange

1.4404 414837

Ø344
31
44

Ø125
1.4301 414738

Mechanical clamping flange

1.4404 414838

Accessories for ACO hygienic gully 142  Page 72

33
 ACO hygienic gully 157
Fixed height – vertical outlet

Fixed height – vertical outlet

Product information
Fixed height gully can be specified as a § Tested and certified according
point drainage in areas where waterproofing to EN 1253
is independent of the gully body. Those gul- § Fire tested and certified solution available
lies can be combined with different grates for classes EI 90 – EI 180 (EN 13 501-2)
depending on requested load class. § Outlet diameter DN 70/DN 100
(75 mm or 110 mm O.D.)
HygieneFirst features § Gully top frame size: 200 x 200 mm and
§ Hygienic design following EN 1672, 250 x 250 mm
ACO gully

EN ISO 14159 and EHEDG document § Wide range of gratings for load class
No. 8, 13 and 44 L 15, R 50, M 125 or N 250 (EN 1253)
§ Available in 1.4301 (304) or 1.4404 including slip resistant solution
(316L) grades of stainless steel § Adjustable EasyFix levelling feet
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)
§ Protective cover available.
See page 224 for more details

Order information

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Standard edge

□200
25

1.4301 408000
285
193

Without FAT

1.4404 408100

Ø75
Ø157
200 x 200 75

1.4301 408001

With FAT

1.4404 408101

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 157  Page 73
34
 ACO hygienic gully 157
Fixed height – vertical outlet 
Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
□250

30
1.4301 408016

198
289
Without FAT

1.4404 408116

Ø75
Ø157
250 x 250 75

ACO gully

1.4301 408017

With FAT

1.4404 408117

□200
25

1.4301 408002
292
193

Without FAT

1.4404 408102

Ø110 200 x 200 110

Ø157

1.4301 408003

With FAT

1.4404 408103

□250
30

1.4301 408018
297
198

Without FAT

1.4404 408118

Ø110
Ø157
250 x 250 110

1.4301 408019

With FAT

1.4404 408119

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 157  Page 73
Gratings for gully top 250 x 250 mm  Page 64 35
  ACO hygienic gully 157
Fixed height – vertical outlet

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Extended edge
□300
□200

20
285
193 1.4301 408047
ACO gully

Ø75
200 x 200 75 With FAT


Ø157

1.4404 408147

□300
□200
20
292
193

1.4301 408099

Ø110
Ø157
200 x 200 110 With FAT

1.4404 408199

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 157  Page 73
36
 ACO hygienic gully 157
Fixed height – horizontal outlet

Fixed height – horizontal outlet

Product information
Fixed height gully can be specified as a § Tested and certified according
point drainage in areas where waterproof- to EN 1253
ing is independent of the gully body. § Outlet diameter DN 70/DN 100
(75 mm or 110 mm O.D.)
Those gullies can be combined with § Gully top frame size: 200 x 200 mm
different grates depending on requested and 250 x 250 mm
load class. § Wide range of gratings for load class
L 15, R 50, M 125 or N 250 (EN 1253)

ACO gully
HygieneFirst features including slip resistant solution
§ Hygienic design following EN 1672, § Adjustable EasyFix levelling feet
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)
§ Protective cover available.
See page 224 for more details

Order information

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Standard edge

□200

1.4301 408008
25

132
170

Without FAT
Ø75

1.4404 408108
157
169
200 x 200 75

1.4301 408009

With FAT

1.4404 408109

□250

1.4301 408024
30

137
175

Without FAT
Ø75

157
1.4404 408124
169

250 x 250 75

1.4301 408025

With FAT

1.4404 408125

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 157  Page 73
Gratings for gully top 250 x 250 mm  Page 64 37
  ACO hygienic gully 157
Fixed height – horizontal outlet

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
□200

1.4301 408010

25

120
170
Without FAT
169

Ø110
1.4404 408110
157
169
200 x 200 110

1.4301 408011
ACO gully

With FAT


1.4404 408111

□250

1.4301 408026
30

124
175
174

Without FAT
Ø110

1.4404 408126
157
169
250 x 250 110

1.4301 408027

With FAT

1.4404 408127

Extended edge

□300
□200
20

132

1.4301 408014
170

Ø75

157
169

200 x 200 75 With FAT

1.4404 408114

□300
□200
20

120
170

1.4301 408015
169

Ø110

157
169

200 x 200 110 With FAT

1.4404 408115

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 157  Page 73
38 Gratings for gully top 250 x 250 mm  Page 64
 ACO hygienic gully 157
Telescopic – vertical outlet 
Telescopic – vertical outlet

Product information
Telescopic gully can be combined either §§ Tested and certified according
 

with gully top or ACO channel in most to EN 1253

flooring constructions. §§ Fire tested and certified solution
available for classes EI 90 – EI 180
Telescopic solution enables height and (EN 13 501-2)
rotational adjustment of connected gully §§ Suitable for all floor types including
top or channel. Gullies are equipped with vinyl flooring
flanges for connection of waterproof §§ Outlet diameter DN 70/DN 100

ACO gully
membrane. (75 mm or 110 mm O.D.)
§§ Gully body with location flange or


HygieneFirst features integrated membrane flange for either
§§ Hygienic design following EN 1672, adhesive bonding or mechanical clamp
EN ISO 14159 and EHEDG document §§ Telescopic friction ring included
No. 8, 13 and 44
§§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§§ Fully pickled and passivated
§§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)

Order information

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø182

1.4301 408048

Without FAT
170
261

1.4404 408148

Location flange 75
Ø75
Ø157
1.4301 408049

With FAT

1.4404 408149

Accessories for ACO hygienic gully 157  Page 73

39
  ACO hygienic gully 157
Telescopic – vertical outlet

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø358

1.4301 408050

170
Without FAT

91

1.4404 408150
Ø75
ACO gully

Ø157
Adhesive
75
bonding flange


1.4301 408051

With FAT

1.4404 408151

Ø358

1.4301 408052
170
261

Without FAT

1.4404 408152
Ø75
Ø157
Mechanical
75
clamping flange

1.4301 408053

With FAT

1.4404 408153

Ø182

1.4301 408054

Without FAT
170
269

1.4404 408154

Location flange 110

Ø110
Ø157
1.4301 408055

With FAT

1.4404 408155

Accessories for ACO hygienic gully 157  Page 73

40
 ACO hygienic gully 157
Telescopic – vertical outlet 
Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø358

1.4301 408056

170
Without FAT

1.4404 408156
99

Ø110

ACO gully
Ø157
Adhesive
110
bonding flange


1.4301 408057

With FAT

1.4404 408157

Ø358

1.4301 408058
170

Without FAT
99

1.4404 408158
Ø110
Ø157
Mechanical
110
clamping flange

1.4301 408059

With FAT

1.4404 408159

Accessories for ACO hygienic gully 157  Page 73

41
 ACO hygienic gully 157
Telescopic – horizontal outlet

Telescopic – horizontal outlet

Product information
Telescopic gully can be combined either § Tested and certified according
with gully top or ACO channel in most to EN 1253
flooring constructions. § Suitable for all floor types including
vinyl flooring
Telescopic solution enables height and § Outlet diameter DN 70/DN 100
rotational adjustment of connected gully (75 mm or 110 mm O.D.)
top or channel. Gullies are equipped with § Gully body with location flange or
flanges for connection of waterproof integrated membrane flange for either
ACO gully

membrane. adhesive bonding or mechanical clamp

§ Telescopic friction ring included
HygieneFirst features § Adjustable EasyFix levelling feet
§ Hygienic design following EN 1672,
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)

Order information

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø182

1.4301 408072
147
110

Without FAT
Ø75

157
169
1.4404 408172

Location flange 75

1.4301 408073

With FAT

1.4404 408173

Accessories for ACO hygienic gully 157  Page 73

42
 ACO hygienic gully 157
Telescopic – horizontal outlet 
Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø358

1.4301 408074

147
110
Without FAT
Ø75

157
168 1.4404 408174

Adhesive
75
bonding flange

ACO gully
1.4301 408075


With FAT

1.4404 408175

Ø358

1.4301 408076
147
110

Without FAT
Ø75

157
168 1.4404 408176

Mechanical
75
clamping flange

1.4301 408077

With FAT

1.4404 408177

Ø182
1.4301 408078
153
98
147

Without FAT
Ø110

157 1.4404 408178

169

Location flange 110

1.4301 408079

With FAT

1.4404 408179

Accessories for ACO hygienic gully 157  Page 73

43
  ACO hygienic gully 157
Telescopic – horizontal outlet

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø358

1.4301 408080

153
98
147

Without FAT

Ø110
157
1.4404 408180
169

Adhesive
110
bonding flange
ACO gully

1.4301 408081


With FAT

1.4404 408181

Ø358

1.4301 408082
153
98
147

Without FAT
Ø110

157
169 1.4404 408182

Mechanical
110
clamping flange

1.4301 408083

With FAT

1.4404 408183

Accessories for ACO hygienic gully 157  Page 73

44
 ACO hygienic gully 157
Gully top – telescopic

Gully top – telescopic

Product information
Gully top can be combined with telescopic § Tested and certified according
gully. Different gully top type is available to EN 1253
depending on floor structure. § Gully top frame size: 200 x 200 mm and
250 x 250 mm
HygieneFirst features § Wide range of gratings for load class
§ Hygienic design following EN 1672, L 15, R 50, M 125 or N 250 (EN 1253)
EN ISO 14159 and EHEDG document including slip resistant solution
No. 8, 13 and 44 § Adjustable EasyFix levelling feet

ACO gully
§ Available in grades 1.4301 (304)
or 1.4401 (316L) of stainless steel
§ Fully pickled and passivated
§ Protective cover available.
See page 224 for more details

Order information

Gully top size Item

Gully top type Material
[mm] number
□200

□200
□200
1.4301 408208
90

25
9090

Ø142
2525

□ 200 x 200
Ø142
Ø142 Standard edge

1.4404 408218

□250
30

□250
3030

□250
95
9595

Ø142 1.4301 408248

Ø142
Ø142

Standard edge □ 250 x 250

1.4404 408258

Ø289
Ø289
Ø289

*
106
106

1.4301 408240
106

Ø142
Ø142
Ø142

Vinyl edge ø289

*
1.4404 408250
20
25
2020
2525

□200
□200
* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
90
9090

Ø142
Gratings
Ø142
Ø142 for gully top 200 x 200 mm  Page 61 Gratings for vinyl top ø222 mm  Page 71
Gratings for gully top 250 x 250 mm  Page 64 Accessories for ACO hygienic gully 157  Page 73 45
 Ø142
Ø142

Ø142

90
 ACO hygienic gully 157
Ø142
Telescopic – horizontal outlet

Gully top size Item

Gully top type Material
[mm] number

20 2020
25 2525
□200
□200

□200
90 9090

1.4301 408241
Ø142
Ø142
□200

20
25
Ø142

Extended edge □ 200 x 200

90

Ø142

1.4404 408251
ACO gully


□200
□200
20 2020
25 2525

□200
90 9090

1.4301 408244
Ø142
Ø142
20
30

□250
Ø142

Extended edge with

□ 200 x 200
95

drainage holes
Ø142

1.4404 408254
20 2020
30 3030

□250
□250

□250
95 9595

Ø142
Ø142
1.4301 408245
Ø142
Ø182
96

Extended edge □ 250 x 250

Ø142

1.4404 408255

Ø182
Ø182

Ø182
□250
20
30
96 9696
95

Ø142
Ø142
1.4301 408246
Ø142
Ø142

Extended edge with

drainage holes □ 250 x 250

□250
20 2020
30 3030

□250

□250
1.4404 408256
95 9595

Ø142
Ø142

Ø142

Gratings for gully top 200 x 200 mm  Page 61 Accessories for ACO hygienic gully 157  Page 73
46 Gratings for gully top 250 x 250 mm  Page 64
 ACO hygienic gully 157
Raising piece – telescopic 
Raising piece – telescopic

Product information
Raising piece can be used for floor §§ Tested and certified according
 

structures where multiple waterproofing to EN 1253

is needed (heat insulation) or where con- §§ Suitable for all floor types including
struction height of the slab needs to be vinyl flooring
increased. §§ Variety of flanges for membranes
§§ Telescopic friction ring included
HygieneFirst features
§§ Hygienic design following EN 1672,

ACO gully
EN ISO 14159 and EHEDG document
No. 8, 13 and 44


§§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§§ Fully pickled and passivated

Order information

Item
Type of flange Material
number

Ø182

1.4301 408249
96

53

Ø142

Location flange

1.4404 408259

Ø358
84

53

Ø142
1.4301 408206

Adhesive bonding flange

1.4404 408216

Ø358
96

1.4301 408207
53

Ø142

Mechanical clamping flange

1.4404 408217

Accessories for ACO hygienic gully 157  Page 73

47
 ACO hygienic gully 218
Fixed height – vertical outlet

Fixed height – vertical outlet

Product information
Fixed height gully can be specified § Tested and certified according
as a point drainage in areas where to EN 1253
waterproofing is independent of the gully § Fire tested and certified solution
body. Those gullies can be combined with available for classes EI 90 – EI 180
different grates depending on requested (EN 13 501-2)
load class. § Outlet diameter DN 100/DN 150
(110 mm or 160 mm O.D.)
HygieneFirst features § Gully top frame size: 300 x 300 mm
ACO gully

§ Hygienic design following EN 1672, § Wide range of gratings for load class
EN ISO 14159 and EHEDG document L 15, R 50, M 125 or N 250 (EN 1253)
No. 8, 13 and 44 including slip resistant solution
§ Available in 1.4301 (304) or 1.4404 § Adjustable EasyFix levelling feet
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)
§ Protective cover available.
See page 224 for more details

Order information

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Standard edge

□300
1.4301 408004
30

297
200

Without FAT

1.4404 408104

Ø110

Ø218
300 x 300 110

1.4301 408005

With FAT

1.4404 408105

Gratings for gully top 300 x 300 mm  Page 67

48 Accessories for ACO hygienic gully 218  Page 74
 ACO hygienic gully 218
Fixed height – vertical outlet 
Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
□300

30
1.4301 408006

274
200
Without FAT

1.4404 408106
Ø160

ACO gully
Ø218

300 x 300 160


1.4301 408007

With FAT

1.4404 408107

Gratings for gully top 300 x 300 mm  Page 67

Accessories for ACO hygienic gully 218  Page 74 49
 ACO hygienic gully 218
Fixed height – horizontal outlet

Fixed height – horizontal outlet

Product information
Fixed height gully can be specified as a § Tested and certified according
point drainage in areas where waterproofing to EN 1253
is independent of the gully body. Those § Outlet diameter DN 100/DN 150
gullies can be combined with different (110 mm or 160 mm O.D.)
grates depending on requested load class. § Gully top frame size: 300 x 300 mm
§ Wide range of gratings for load class
HygieneFirst features L 15, R 50, M 125 or N 250 (EN 1253)
§ Hygienic design following EN 1672, including slip resistant solution
ACO gully

EN ISO 14159 and EHEDG document § Adjustable EasyFix levelling feet

No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)
§ Protective cover available.
See page 224 for more details

Order information

Outlet Item
Top size Foul air trap Material
diameter number
□ [mm] ø [mm]
Standard edge

□300

1.4301 408012
30

185
130
177

Without FAT
Ø110

223 1.4404 408112

200

300 x 300 110

1.4301 408013

With FAT

1.4404 408113

Gratings for gully top 300 x 300 mm  Page 67

50 Accessories for ACO hygienic gully 218  Page 74
 ACO hygienic gully 218
Telescopic – vertical outlet 
Telescopic – vertical outlet

Product information
Telescopic gully can be combined either §§ Tested and certified according
 

with ACO gully top or ACO channel in most to EN 1253

flooring constructions. §§ Fire tested and certified solution
available for classes EI 90 – EI 180
Telescopic solution enables height and (EN 13 501-2)
rotational adjustment of connected gully §§ Suitable for all floor types including
top or channel. Gullies are equipped with vinyl flooring
flanges for connection of waterproof §§ Outlet diameter DN 100/DN 160

ACO gully
membrane. (110 mm or 160 mm O.D.)
§§ Gully body with location flange or


HygieneFirst features integrated membrane flange for either
§§ Hygienic design following EN 1672, adhesive bonding or mechanical clamp
EN ISO 14159 and EHEDG document §§ Telescopic friction ring included
No. 8, 13 and 44
§§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§§ Fully pickled and passivated
§§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)

Order information

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø240

1.4301 408060
170

Without FAT

1.4404 408160
99

Ø110 Location flange 110

1.4301 408061

With FAT

1.4404 408161

Accessories for ACO hygienic gully 218  Page 74

51
  ACO hygienic gully 218
Telescopic - vertical outlet

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø420

1.4301 408062
170

Without FAT
99

1.4404 408162
Ø110
ACO gully

Adhesive
110
bonding flange


1.4301 408063

With FAT

1.4404 408163

Ø418

1.4301 408064
168

Without FAT
99

1.4404 408164
Ø110
Ø218
Mechanical
110
clamping flange

1.4301 408065

With FAT

1.4404 408165

Accessories for ACO hygienic gully 218  Page 74

52
 ACO hygienic gully 218
Telescopic - vertical outlet 
Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø240

1.4301 408066

Without FAT
170
244

1.4404 408166

Ø160
Ø218 Location flange 160

ACO gully
1.4301 408067


With FAT

1.4404 408167

Ø420

1.4301 408068
170

Without FAT
77

1.4404 408168
Ø160
Ø218

Adhesive
160
bonding flange

1.4301 408069

With FAT

1.4404 408169

Ø418

1.4301 408070
170

Without FAT
77

1.4404 408170
Ø160
Ø218

Mechanical
160
clamping flange

1.4301 408071

With FAT

1.4404 408171

Accessories for ACO hygienic gully 218  Page 74

53
 ACO hygienic gully 218
Telescopic – horizontal outlet

Telescopic – horizontal outlet

Product information
Telescopic gully can be combined either § Tested and certified according
with gully top or ACO channel in most to EN 1253
flooring constructions. § Suitable for all floor types including
vinyl flooring
Telescopic solution enables height and § Outlet diameter DN 100/DN 160
rotational adjustment of connected gully (110 mm or 160 mm O.D.)
top or channel. Gullies are equipped with § Gully body with location flange or
flanges for connection of waterproof integrated membrane flange for either
ACO gully

membrane. adhesive bonding or mechanical clamp

§ Telescopic friction ring included
HygieneFirst features § Adjustable EasyFix levelling feet
§ Hygienic design following EN 1672,
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated
§ Fully removable and easily cleanable
stainless steel foul air trap (FAT)

Order information

Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø240

1.4301 408084
98
147

153

Without FAT
Ø110

1.4404 408184
218

199
Location flange 110

1.4301 408085

With FAT

1.4404 408185

Accessories for ACO hygienic gully 218  Page 74

54
 ACO hygienic gully 218
Telescopic – horizontal outlet 
Outlet
Item
Type of flange diameter Foul air trap Material
number
ø [mm]
Ø420

1.4301 408086

98
147

Ø110
Without FAT
218

199
1.4404 408186

Adhesive
110

ACO gully
bonding flange


1.4301 408087

With FAT

1.4404 408187

Ø420

1.4301 408088
98
147

Ø110

Without FAT

218

1.4404 408188
199

Mechanical
110
clamping flange

1.4301 408089

With FAT

1.4404 408189

Accessories for ACO hygienic gully 218  Page 74

55
 ACO hygienic gully 218
Gully top – telescopic

Gully top – telescopic

Product information
Gully top can be combined with telescopic § Tested and certified according
gully. Different gully top type is available to EN 1253
depending on floor structure. § Gully top frame size: 300 x 300 mm
§ Wide range of gratings for load class
HygieneFirst features L 15, R 50, M 125 or N 250 (EN 1253)
§ Hygienic design following EN 1672, including slip resistant solution
EN ISO 14159 and EHEDG document § Adjustable EasyFix levelling feet
No. 8, 13 and 44
ACO gully

§ Available in 1.4301 (304) or 1.4404

(316L) grades of stainless steel
§ Fully pickled and passivated
§ Protective cover available.
See page 224 for more details

Order information

Gully Top size Item

Gully Top type Material
ø [mm] number
Ø350

20
30

20
30
30

□300 □300
30

□300
95

95
107
95

1.4301 408228
Ø200 Ø200
Ø200
Ø200

Standard edge 300 x 300

1.4404 408238

Ø350
20
30

20
30
30

□300 □300
30

□300

*
95

95

1.4301 408242
107

Ø200 Ø200
Ø200
Ø200

Vinyl edge ø350

*
1.4404 408252

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

Gratings for gully top 300 x 300 mm  Page 67 Accessories for ACO hygienic gully 218  Page 74
56 Gratings for vinyl top ø222 mm  Page 71
 ACO hygienic gully 218
Gully top – telescopic 
Gully Top size Item
Gully Top type Material
ø [mm] number

20
30

20
30
30

□300 □300
95

95
Ø200 Ø200 1.4301 408243

Extended edge 300 x 300

ACO gully
1.4404 408253


20
30

20
30

□300
95

1.4301 408247
Ø200

Extended edge with

300 x 300
drainage holes

1.4404 408257

Gratings for gully top 300 x 300 mm  Page 67

Accessories for ACO hygienic gully 218  Page 74 57
  ACO hygienic gully 218
Raising piece – telescopic

Raising piece – telescopic

Product information
Raising piece can be used for floor §§ Tested and certified according
structures where multiple waterproofing to EN 1253
is needed (heat insulation) or where §§ Suitable for all floor types including
construction height of the slab needs to vinyl flooring
be increased. §§ Variety of flanges for membranes
§§ Telescopic friction ring included
HygieneFirst features
§§ Hygienic design following EN 1672,
ACO gully

EN ISO 14159 and EHEDG document

No. 8, 13 and 44


§§ Available in 1.4301 (304) or 1.4404

(316L) grades of stainless steel
§§ Fully pickled and passivated

Order information

Item
Type of flange Material
number

Ø420 Ø418
Ø240

1.4301 408209
92

92
92

53

Ø200 Ø200 Ø200

53

54

Location flange

1.4404 408219

Ø420 Ø418
Ø240
92

92
92

53

1.4301 408226
Ø200 Ø200 Ø200
53

54

Adhesive bonding flange

1.4404 408236

Ø420 Ø418
92

1.4301 408227
Ø200 Ø200
53

54

Mechanical clamping flange

1.4404 408237

Accessories for ACO hygienic gully 218  Page 74

58
 ACO gully EG150
Telescopic – vertical outlet

Telescopic – vertical outlet

Product information
ACO gully EG150 can be combined with § Stainless steel construction for
ACO channel with outlet diameter durability and long life
110 mm. Foul air trap needs to be ordered
separately.

ACO gully
Order information

Item
FAT Material
number

*
1.4301 405066
90
168

Without FAT

*
Ø75
1.4404 402663

Ø132,5
*
1.4301 408805
102,5

Without FAT
194,5

*
1.4404 405312
Ø110

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

Accessories for ACO gully EG150  Page 75

59
  ACO gully EG150
Telescopic – horizontal outlet

Telescopic – horizontal outlet

Product information
ACO gully EG150 can be combined with §§ Stainless steel construction for
 

ACO channel with outlet diameter durability and long life

110 mm. Foul air trap needs to be ordered
separately.
ACO gully


Order information

Item
FAT Material
number

Ø135 *
1.4301 406677

Without FAT
Ø75

*
44

200 1.4404 405311

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
x

Accessories for ACO gully EG150  Page 75

60
 Gratings
Gratings for gully top 200 x 200 mm

Gratings for gully top 200 x 200 mm

Product information
Variety of grate types is available depending § Fits to stainless steel gully, fully
on application and requested load class. compliant to EN 1253
For applications with high hygienic and NSF International
demands ladder grate or cast grate should § Gully top frame size: 200 x 200 mm
be selected. § Range of gratings suitable to load class
L 15, R 50, M 125 or N 250 (EN 1253)
HygieneFirst features § Slip resistant solution available
§ Hygienic design following EN 1672,

ACO gully
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated

ACO hygienic cast grating

168
168

Item
Load class Slip resistant Material
number
M 125 Yes 1.4301 416942
Note: Surface electropolished

ACO hygienic ladder grating

168
168

Item
Load class Slip resistant Material
number
1.4301 416912
R 50 Yes
1.4404 416913
1.4301 408093
M 125 Yes
1.4404 408193
1.4301 408043
N 250 No
1.4404 408143
Note: Surface electropolished

ACO hygienic gully 142 - fixed height  Page 20 Gully top - telescopic  Page 30
ACO hygienic gully 157 - fixed height  Page 34 Gully top - telescopic  Page 45 61
 ACO gully - gratings
Gratings for gully top 200 x 200 mm

ACO mesh grating

168

168
Item
Load class Slip resistant Material
number
ACO gully

1.4301 408090 *
Yes
1.4404 408190 *
L 15
1.4301 408091 *
No
1.4404 408191 *
Note: Surface electropolished

ACO quadrato grating

168
168

Item
Load class Slip resistant Material
number
1.4301 408092 *
L 15 No
1.4404 408192 *

ACO heelsafe grating

168
168

Item
Load class Slip resistant Material
number
1.4301 408022 *
L 15 No
1.4404 408122 *

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

ACO hygienic gully 142 - fixed height  Page 20 Gully top - telescopic  Page 30
62 ACO hygienic gully 157 - fixed height  Page 34 Gully top - telescopic  Page 45
 ACO gully - gratings
Gratings for gully top 200 x 200 mm

ACO multi-slot 5 grating

168

168
Item
Load class Slip resistant Material
number
1.4301 408094 *
L 15 Yes
408194 *

ACO gully
1.4404
Note: Surface electropolished

ACO hygienic slot cover

168
168

Item
Load class Slip resistant Material
number
1.4301 445780
R 50 Yes
1.4404 445781
1.4301 445782
M 125 Yes
1.4404 445783
Note: Top surface sandblasted

ACO odour proof gully cover

165
165

Ø223
Item Ø223
Load class Slip resistant Material
number
R 50 No 1.4404 445398 *
M 125 No 1.4404 445605 *
225

230

For ACO vacuum handle, please go to page 72.

ACO tundish for gully top

25

30

Ø100 Ø100
Ø223 Ø223 Ø223
□168 □218
225

230

230
25

30

30

Ø100 Ø100 Ø100

□168 □218 □268

Item
Description Material
number
ACO tundish for gully top 200 x 200 1.4301 415918
* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
ACO hygienic gully 142 - fixed height  Page 20 Gully top - telescopic  Page 30
ACO hygienic gully 157 - fixed height  Page 34 Gully top - telescopic  Page 45 63
 Gratings
Gratings for gully top 250 x 250 mm

Gratings for gully top 250 x 250 mm

Product information
Variety of grate types is available depend- § Fits to stainless steel gully, fully
ing on application and requested load compliant to EN 1253
class. For applications with high hygienic and NSF International
demands ladder grate or cast grate should § Gully top frame size: 250 x 250 mm
be selected. § Range of gratings suitable to load class
L 15, R 50, M 125 or N 250 (EN 1253)
HygieneFirst features § Slip resistant solution available
§ Hygienic design following EN 1672,
ACO gully

EN ISO 14159 and EHEDG document

No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated

ACO hygienic cast grating

218
218

Item
Load class Slip resistant Material
number
M 125 Yes 1.4301 416943
Note: Surface electropolished

ACO hygienic ladder grating

218
218

Item
Load class Slip resistant Material
number
1.4301 416914
R 50 Yes
1.4404 416915
1.4301 408028
M 125 Yes
1.4404 408128
1.4301 408044
N 250 No
1.4404 408144
Note: Surface electropolished

ACO hygienic gully 157 - fixed height  Page 34 Gully top - telescopic  Page 45
64
 Gratings
Gratings for gully top 250 x 250 mm

ACO mesh grating

218

218
Item
Load class Slip resistant Material
number
1.4301 408095 *

ACO gully
Yes
1.4404 408195 *
L 15
1.4301 408096 *
No
1.4404 408196 *
Note: Surface electropolished

ACO quadrato grating

218
218

Item
Load class Slip resistant Material
number
1.4301 408097 *
L 15 No
1.4404 408197 *

ACO heelsafe grating

218
218

Item
Load class Slip resistant Material
number
1.4301 408031 *
L 15 No
1.4404 408131 *

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

ACO hygienic gully 157 - fixed height  Page 34 Gully top - telescopic  Page 45
65
 Gratings
Gratings for gully top 250 x 250 mm

ACO multi-slot 5 grating

218

218
Item
Load class Slip resistant Material
number
1.4301 408033 *
L 15 Yes
1.4404 408133 *
ACO gully

Note: Surface electropolished

ACO hygienic slot cover

218 218

Item
Load class Slip resistant Material
number
1.4301 445784
R 50 Yes
1.4404 445785
1.4301 445786
M 125 Yes
1.4404 445787
Note: Top surface sandblasted

ACO odour proof gully cover

215
215

Ø223 Ø223 Ø22

Item
Load class Slip resistant Material
number
R 50 No 1.4404 445399 *
M 125 No 1.4404 445607 *
225

230

230

For ACO vacuum handle, please go to page 73.

25

30

30

ACO tundish for gully top Ø100 Ø100 Ø10

Ø223 Ø223
□168 Ø223
□218 □26
225

230

230
25

30

30

Ø100 Ø100 Ø100

□168 □218 □268

Item
Description Material
number
ACO tundish for gully top 250 x 250 1.4301 413546

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
ACO hygienic gully 157 - fixed height  Page 34 Gully top - telescopic  Page 45
66
 Gratings
Gratings for gully top 300 x 300 mm

Gratings for gully top 300 x 300 mm

Product information
Variety of grate types is available depend- § Fits to stainless steel gully, fully
ing on application and requested load compliant to EN 1253
class. For applications with high hygienic and NSF International
demands ladder grate or cast grate should § Gully top frame size: 300 x 300 mm
be selected. § Range of gratings suitable to load class
L 15, R 50, M 125 or N 250 (EN 1253)
HygieneFirst features § Slip resistant solution available
§ Hygienic design following EN 1672,

ACO gully
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated

ACO hygienic cast grating

268
268

Item
Load class Slip resistant Material
number
M 125 Yes 1.4301 416944
Note: Surface electropolished

ACO hygienic ladder grating

268
268

Item
Load class Slip resistant Material
number
1.4301 416916
R 50 Yes
1.4404 416917
1.4301 408037
M 125 Yes
1.4404 408137
1.4301 408045
N 250 No
1.4404 408145
Note: Surface electropolished

ACO hygienic gully 218 - fixed height  Page 48 Gully top - telescopic  Page 56
67
 Gratings
Gratings for gully top 300 x 300 mm

ACO mesh grating

268

268
Item
Load class Slip resistant Material
number
ACO gully

1.4301 408034
Yes
1.4404 408134
L 15
1.4301 408035 *
No
1.4404 408135 *
Note: Surface electropolished

ACO quadrato grating

268
268

Item
Load class Slip resistant Material
number
1.4301 408036 *
L 15 No
1.4404 408136 *

ACO heelsafe grating

268
268

Item
Load class Slip resistant Material
number
1.4301 408040 *
L 15 No
1.4404 408140 *

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

ACO hygienic gully 218 - fixed height  Page 48 Gully top - telescopic  Page 56
68
 Gratings
Gratings for gully top 300 x 300 mm

ACO multi-slot 5 grating

268

268
Item
Load class Slip resistant Material
number
1.4301 408042 *
L 15 Yes

ACO gully
1.4404 408142 *
Note: Surface electropolished

ACO hygienic slot cover

268
268

Item
Load class Slip resistant Material
number
1.4301 445788
R 50 Yes
1.4404 445789
1.4301 445790
M 125 Yes
1.4404 445791
Note: Top surface sandblasted

ACO odour proof gully cover

265
265

Ø223 Ø223 Ø223

Item
Load class Slip resistant Material
number
R 50 No 1.4404 445400 *
445609 *
225

230

230

M 125 No 1.4404
For ACO vacuum handle, please go to page 74.
25

30

30

Ø100 Ø100 Ø100

ACO tundish for gully top □168 □218 □268

Ø223 Ø223 Ø223

225

230

230
25

30

30

Ø100 Ø100 Ø100

□168 □218 □268

Item
Description Material
number
ACO tundish for gully top 300 x 300 1.4301 413547

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.
ACO hygienic gully 218 - fixed height  Page 48 Gully top - telescopic  Page 56
69
 Gratings
Gratings for vinyl top ø170

Gratings for vinyl top ø170

Product information
Variety of grate types is available § Fits to stainless steel gully, fully
depending on application and requested compliant to EN 1253
load class. For applications with high § Stainless steel construction for
hygienic demands ladder grate or cast durability and long life
grate should be selected. § Range of gratings suitable to load class
L 15 and M 125 (EN 1253)
HygieneFirst features § Slip resistant solution available
§ Hygienic design following EN 1672,
ACO gully

EN ISO 14159 and EHEDG document

No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated

ACO ladder grating

Ø170

Item
Load class Slip resistant Material
number
1.4301 97146
M 125 Yes
1.4404 97367
Note: Surface electropolished

ACO perforated grating

Ø170

Item
Load class Slip resistant Material
number
1.4301 97152 *
L 15 No
1.4404 97369 *

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

ACO odour proof gully cover

For ACO odour proof gully cover, please contact our Sales/Technical department.

Gully top  Page 45

70
 Gratings
Gratings for vinyl top ø222

Gratings for vinyl top ø222

Product information
Variety of grate types is available § Fits to stainless steel gully, fully
depending on application and requested compliant to EN 1253
load class. For applications with high § Stainless steel construction for
hygienic demands ladder grate or cast durability and long life
grate should be selected. § Range of gratings suitable to load class
L 15 and M 125 (EN 1253)
HygieneFirst features § Slip resistant solution available
§ Hygienic design following EN 1672,

ACO gully
EN ISO 14159 and EHEDG document
No. 8, 13 and 44
§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§ Fully pickled and passivated

ACO ladder grating

Ø222

Item
Load class Slip resistant Material
number
1.4301 97148
M 125 Yes
1.4404 97388
Note: Surface electropolished

ACO perforated grating

Ø222

Item
Load class Slip resistant Material
number
1.4301 97153 *
L 15 No
1.4404 97390 *

* Hygienic design following EN 1672, EN ISO 14159 and EHEDG document No. 8, 13, 44 not applied.

ACO odour proof gully cover

For ACO odour proof gully cover, please contact our Sales/Technical department.

Gully top  Page 56

71
  Accessories
Accessories for ACO hygienic gully 142

Accessories for ACO hygienic gully 142

Item
Description Used with Material
number

Ø154 Ø142
1.4301 416900
ACO silt basket ■ ACO hygienic gully 142 - Telescopic
45

■ Stainless steel †† Vertical or horizontal

■ 0,4 litre capacity
1.4404 416901

222 Ø142 Ø159

■ ACO hygienic gully 142 - Fixed 1.4301 416902
ACO silt basket
26
25

height
ACO gully

■ Stainless steel
†† Vertical or horizontal
■ 0,3 litre capacity
1.4404 416903


Ø127 Ø100
1.4301 414741
ACO hygienic foul air trap ■ ACO hygienic gully 142
■ Stainless steel †† Fixed height
74

■ Water seal 50 mml †† Telescopic

1.4404 414841

Ø164 ACO friction ring ■ ACO hygienic gully 142

■ SBR (Styrene-butadiene †† Telescopic SBR 414742
25

rubber)

Ø142 ACO standard

Ø184 ■ ACO hygienic gully 142
foul air trap support
†† Fixed height NBR 414743
29

■ NBR (Acryl nitrile-butadiene

24

†† Telescopic
rubber)
Ø243
Ø156
Ø156 Ø142
24

21
26,5

ACO fire resistant kit for gully ■ ACO hygienic gully 142
Ø127 Ø100 142/DN 70 1.4404 /
†† Fixed height, vertical 416930
Ø217 †† Fixed height, vertical NBR
†† Telescopic, vertical
†† Telescopic, vertical
78
21

Ø223 Ø198

ACO fire resistant kit for gully ■ ACO hygienic gully 142
142/DN 100 1.4404 /
†† Fixed height, vertical 416931
†† Fixed height, vertical NBR
150

†† Telescopic, vertical
†† Telescopic, vertical

ACO vacuum handle ■ ACO odour proof gully cover Aluminium 445622

120

178
ACO foul air trap for horizontal
outlet DN70 and DN100 ■ ACO hygienic gully 142 - Horizontal
PP / NBR 9575.30.15
Ø66

■ PP (Polypropylene plastic) †† Fixed height or Telescopic

■ NBR (Acryl nitrile-butadiene
11 rubber)

ACO hygienic gully 142  Page 20

72
 Accessories
Accessories for ACO hygienic gully 157 
Accessories for ACO hygienic gully 157

Item
Description Used with Material
number

Ø159 Ø142 1.4301 416904

ACO silt basket ■ ACO hygienic gully 157 - Vertical
■ Stainless steel †† Fixed height or Telescopic

45
50

■ 0,4 litre capacity

1.4404 416905

142 Ø159
1.4301 416906
ACO silt basket ■ ACO hygienic gully 157 - Horizontal
26

ACO gully
■ Stainless steel †† Fixed height or Telescopic
■ 0,3 litre capacity
1.4404 416907


Ø127 Ø100
1.4301 408200
ACO hygienic foul air trap ■ ACO hygienic gully 157
74

■ Stainless steel †† Telescopic

105

Ø164
■ Water seal 50 mml
1.4404 408210
25

Ø184
Ø142 ACO friction ring ■ ACO hygienic gully 157
■ SBR (Styrene-butadiene †† Telescopic SBR 408205
24
29

rubber)

Ø243 ACO standard

Ø156 ■ ACO hygienic gully 157
foul air trap support
24

†† Fixed height NBR 408201

21

■ NBR (Acryl nitrile-butadiene

†† Telescopic
rubber)
Ø217
Ø156 Ø142
21
21,5

26,5

Ø127 ACO fire resistant kitØ100

for gully ■ ACO hygienic gully 157
157/DN 70 1.4404 /
†† Fixed height, vertical 416932
†† Fixed height, vertical NBR
†† Telescopic, vertical
78

†† Telescopic, vertical
111

Ø223 Ø198

ACO fire resistant kit for gully ■ ACO hygienic gully 157
150

157/DN 100 1.4404 /

†† Fixed height, vertical 416933
210

†† Fixed height, vertical NBR

†† Telescopic, vertical
†† Telescopic, vertical

ACO vacuum handle ■ ACO odour proof gully cover Aluminium 445622

120

172

ACO foul air trap

for horizontal outlet DN100 ■ ACO hygienic gully 157 - Horizontal
■ PP (Polypropylene plastic) PP / NBR 445845
Ø95

†† Fixed height or Telescopic

■ NBR (Acryl nitrile-butadiene
rubber)
15

ACO hygienic gully 157  Page 34

73
  Accessories
Accessories for ACO hygienic gully 218

Accessories for ACO hygienic gully 218

Item
Description Used with Material
number

Ø222 Ø159 Ø142 1.4301 416908

ACO silt basket
■ ACO hygienic gully 218 - Vertical
■ Stainless steel

45
50

50
†† Fixed height or Telescopic
■ 1,4 litre capacity
1.4404 416909

Ø222 Ø142 Ø159 1.4301 416910

ACO silt basket
■ ACO hygienic gully 218 - Horizontal
26

26
25
ACO gully

■ Stainless steel
†† Fixed height or Telescopic
■ 0,7 litre capacity
1.4404 416911


Ø164
25

Ø182 Ø127 Ø100

1.4301 408220
Ø142
ACO hygienic foul air trap ■ ACO hygienic gully 218
Ø184 ■ Stainless steel †† Fixed height

74
96

105

■ Water seal 50 mm †† Telescopic

29

408230
24

1.4404

Ø243
Ø156 ACO friction ring ■ ACO hygienic gully 218
■ SBR (Styrene-butadiene †† Telescopic SBR 408225
24

21

rubber)
ACO standard
Ø217 ■ ACO hygienic gully 218
foul air trap support
†† Fixed height NBR 408221
■ NBR (Acryl nitrile-butadiene
21

†† Telescopic
rubber)
Ø218 Ø156 Ø142
21,5

26,5
22

Ø182 ACO fire resistant kit for gully

Ø127 ■ ACO hygienic gully 218 Ø100
218/DN 110 †† Fixed height, vertical 1.4404 /
416934
†† Fixed height, vertical †† Telescopic, vertical NBR
78

†† Telescopic, vertical
99

111

Ø298 Ø223 Ø198

ACO fire resistant kit for gully ■ ACO hygienic gully 218
150

218/DN 160 1.4404 /

416935
210

†† Fixed height, vertical

210

†† Fixed height, vertical NBR

†† Telescopic, vertical
†† Telescopic, vertical

ACO vacuum handle ■ ACO odour proof gully cover Aluminium 445622

120

172

ACO foul air trap

for horizontal outlet DN100 ■ ACO hygienic gully 218 - Horizontal
■ PP (Polypropylene plastic) PP / NBR 9515.30.15
Ø95

†† Fixed height or Telescopic

■ NBR (Acryl nitrile-butadiene
rubber)
15

ACO hygienic gully 218  Page 48

74
 Accessories
Accessories for ACO gully EG150 and ACO tundish portable 
Accessories for ACO gully EG150

Item
Description Used with Material
number

Ø105 1.4301 97235

Sieve ■ ACO slot channel 20
Ø105 ■ ACO modular box channel 125
Ø108
Ø105 (for outlet 110 mm)
■ ACO modular box channel 200
Ø108
■ Stainless steel ■ ACO modular slot channel 20
Ø108
1.4404 97285
91
9191

Ø108 1.4301 97217

■ ACO slot channel 20
Foul air trap
Ø108 ■ ACO modular box channel 125
Ø108 ■ Stainless steel
■ ACO modular box channel 200
85

■ Water seal 50 mm
■ ACO modular slot channel 20 1.4404 97267
8585

Ø102+2

Ø102+2 ■ ACO slot channel 20

86±2 86±2

Ø102+2
■ ACO modular box channel 125 1.4301 409190
■ ACO modular box channel 200
Silt basket
86±2

Ø88 ■ ACO modular slot channel 20

■ Stainless steel
■ Don’t combine with FAT
Ø88
Ø88 ■ Suitable with P-Trap 1.4404 409189
(ACO pipe chapter)

ACO tundish portable

Item



Description Material
number
Ø250

ACO tundish portable

250

1.4301 415821
■ Stainless steel

15 

30

Ø100
Ø300

ACO gully EG150  Page 59

75
  Flow rates and Construction heights
Flow rates and Construction heights
□200 □200 □200 □200 □200 □200

A
A

A
Flow rates and Construction heights
ØD
ØD Ø142

ACO hygienic gully 142 – fixed heightØD

Ø142 ØD
Ø142
ØD
Ø142
Ø142 ØD
Ø142

□200 □200 □200 □200 □200 □200 □200

200 □200 □200
A

A
A
A

ØD
A
ØD

ØD

ØD

ØD

ØD
ØD
Ø142

D
ØD
42
Ø142 ØD
ACO gully

Ø142

Outlet Outlet Outlet Outlet

Flow rate
□200 [l/s] Flow rate [l/s]
□200 □200 □200 □200 □200 □200
00 □200 □200
diameter position diameter position


øD A = 135 [mm] øD A = 135 [mm]

A
A

A
A

75 1.4 ØD 75 1.4
Vertical Horizontal
ØD

110 1.6 110 1.6

ØD

ØD

ØD
ØD
Ø157
Ø157
ØD ØD
Ø157 Ø157 ØD
Ø157
ØD

00 ACO
200□hygienic gully
200 142 – telescopic
200 □ □
Ø157

□200 □200 □200 □200 □200 □200

A

A
A

A
200
□□□200
□200
□20
2

A
200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200

ØD
A
A
A
A
A
ØD

A
A
A
A
A
ØD

A
A
A
A
A

A
A
A
A
A
A
A
A
A
A

A
A
A
A
A
ØD

ØD
ØD

Ø157

ØD
D
57 ØD
Ø157 ØD
ØD
ØD
ØD
Ø
ØD
ØD
ØD
ØD
ØD
ØD Ø142
Ø142
Ø142
Ø14
Ø1
Ø157 ØD
ØD
ØD
ØD
ØD
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
Ø142
Ø142
Ø142
Ø142
Ø142
00 □200 □200 □200 Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
ØD
□300 □300 □300 □300 □300 □300
Ø142
Ø142
Ø142
Ø142
Ø142
A

A
A

200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□20
2
A

A
A

A
ØD

Outlet Outlet
A
A
A
A
A

A
A
A
A
A

Flow rate [l/s]

A
A
A
A
A

A
A
A
A
A

A
A
A
A
A
diameter position
A
A
A
A
A
ØD

ØD
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
ØD

øD A =20052
200 [mm] A =200
82200 [mm] A =200
97 200 [mm] A = 127 200 [mm] A = 157 200 [mm] 200
ØD
ØD
ØD
ØD
ØD

□□200
□200□200
□200
□□□□□
200
200
200 □□□□□
200
200
200 □□□□□
200
200
200 □□□□□
200
200
200
200 200
200
200□□□□□
200
ØD
ØD
ØD
ØD
ØD

ØD
ØD

ØD
ØD
ØD
ØD
ØD
75Ø218 1.4 1.6 1.6 1.7 Ø218
1.8
AA
A
A
A

AA
A
A
A

Vertical
AA

ØD
A
A
A

AA
A
A
A
ØD
AA
A
A
A

110 1.6 1.8 1.8 1.9 2.0

AA
A
A
A

Ø218 Ø218 ØD
Ø218
ØD
□300 □300 □300 □300 Ø218

ØD
ØD
ØDØD
ØD
□300 □300 200
□□
ØD □200
□200
□200
200 □300 200
□□□200
□200
□200
200 □300 200
□□□200
□200
□200
200 □300 200
□□□200
□200
□200
200 □300 200
□□□200
□200
□200
200 □□200
Ø142□200
□200
□20
20
ØD
ØD
ØD
ØD Ø142
Ø142
Ø142
Ø142
A

Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØDØD
ØD
A

ØD
A
A
A
A
A

Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
A

ØD
ØD
ØDØD
ØD
A
A
A
A
A
A

Ø142
A
A
A
A
A

Ø142
Ø142
Ø142
Ø142
A

A
A
A
A
A

Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØDØD
ØD
A

A
A
A
A
A
A

A
A
A
A
A
Ø142
ØD

Ø142
Ø142
Ø142
Ø142
ØD

ØD

□□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200
ØD

ØD
ØD
AA

Ø218
A
A
A

ØD
AA
A
A
A

AA

ØD
ØD
ØD
ØD
ØD
A
A
A

AA

AA
A
A
A

A
A
A

ØD ØD
ØD
ØD
ØD
ØD
AA
A
A
A

Ø157
Ø157
Ø157
Ø15
Ø15
Ø218 ØD Ø157
Ø157
Ø157
Ø157
Ø157
ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
Ø218
ØD
ØD
ØD
ØD
ØD

ØD Ø157
Ø157
Ø157
Ø157
Ø157 Ø157
Ø157
Ø157
Ø157
Ø157 ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218 Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø157
Ø157
Ø157
Ø157
Ø157
□300 □300 □300 □300

200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□200
200 200
□□□200
□200
□20
20
A

A
A
A
A
A
A
A

A
A
A
A
A

ØD

A
A
A
A
A

Outlet Outlet
A
A
A
A
A

A
A
A
A
A
A
A
A
A
A

200
□200 200
□200 200
□200 200
□200 200
□200 200
□200
Flow rate [l/s]
□□200
□200
□200 □□200
□200
□200 □□200
□200
□200 □□200
□200
□200 □□200
□200
□200 □□200
□200
□200

diameter position
ØD

ØD
ØD
ØD
ØD
ØD
AA
A
A
A
ØD

ØD
ØD
ØD
ØD
ØD
AA
A
A
A

AA
A
A
A
ØD

AA

øD A = 52 [mm] A = 82 [mm] A = 97 [mm] A = 127 [mm] A = 157 [mm]

A
A
A
ØD
ØD
ØD
ØD
ØD

AA
A
A
A

AA
A
A
A
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD

75 1.4 1.6 1.6 1.7 1.8

Horizontal
110 1.6 1.8 1.8 1.9 2.0
ØD
ØD
ØDØD
ØD
ØD
ØD
ØDØD
ØD
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØDØD
ØD ØD
300
□□□300
□300
□300
300 300
□□□300
□300
□300
300 ØD
ØD
ØD
ØD 300
□□□300
□300
□300
300 300
□□□300
□300
□300
300 300
□□□300
□300
□300
300 □
Ø157
Ø157
Ø157
Ø157
Ø157 Ø157 ØD
ØD
ØDØD
ØD
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
A
A
A
A
A

ØD
ØD
ØDØD
ØD
A
A
A
A
A

A
A
A
A
A

Ø157
Ø157
Ø157
Ø157
Ø157
A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

□□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200 □□200
□200
□200200
□200
AA
A
A
A

AA
A
A
A

AA
A
A
A

AA
A
A
A

AA
A
A
A
AA
A
A
A

Ø
ØD
ØD
ØD
ØD
ØD
ØØ
ØD

76
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218
ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218 ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218
ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218
 ØD
Ø142

Flow rates and Construction heights


ØD
Ø142 ØD
□200
Ø142
□200 □200 □200
Flow rates and Construction heights □200 □200

A
□200 □200 □200

A
A

A
A

ØD
ØD

ØD
ØD
ØD
Ø157

ØD
Ø157
ACO hygienic gully Ø157
157 – fixed height
ØD ØD
Ø157 ØD
Ø157
ØD
Ø157

□200 □200 □200 □200 □200 □200

□200 □200 □200
A

A
A

A
A
A

ØD
□□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200
ØD

ØD
A
A
A
A
A

A
A
A
A
A

ØD

A
A
A
A
A

A
A
A
A
A
A
A
A
A
A
ØD

A
A
A
A
A
ØD
ØD
Ø157

ACO gully
ØD ØD
ØD
ØD
ØD
ØD

Outlet
Ø157
OutletØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD Outlet Outlet Ø142
Ø142
Ø142
Ø142
Ø142

Ø157
Ø142
Ø142
Ø142
Ø142
Ø142
Flow rate [l/s] Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
ØD Flow rate [l/s]
diameter position diameter Ø142 position


□300 □300 □300 □300 □300 ØD
ØD
ØD
ØD
ØD □300
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
ØD
□200 □200 □200
øD A = 193 [mm] øD A = 170 [mm] Ø142
Ø142
Ø142
Ø142
Ø142
A

A
75 2.7 75 2.6

A
□□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200
Vertical Horizontal
A

A
A

110 3.5 110 2.8

A
A
A
A
A

ØD
A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

A
A
A
A
A
A
A
A
A
A
ØD
ØD
ØD
ØD
ØD

□200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200
ØD

□200
□200
□□200
200
ØD
ØD
ØD
ØD
ØD
ØD

ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218

ØD
ØD
ØD
ØD
ØD
A
A
A
A

Ø218
A
A
A
A

ØD
ØD
ØD
ØD
ØD
A
A
A
A
ØD

A
A
A
A
ØD

A
A
A
A

A
A
A
A
Ø218 ØD
ACO hygienic gully 157 – telescopic
Ø218
Ø218
ØD
Ø218

ØD
ØD
ØD
ØD
□300 □300 □300 □300 ØD
ØD
ØD
ØD □300
□300 □300 □300 □300 Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
□□200
□200
□200
□200
200 ØD
ØD
ØD
□ØD
□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
A

ØD
ØD
ØD
ØD
A

Ø142
Ø142
Ø142
Ø142
A
A
A
A
A

A
A

Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
A

A
A
A
A
A
A
A

A
A

A
A
A
A
A

Ø142
Ø142
Ø142
Ø142

ØD
A
A
A
A
A

A
A
A
A
A

A
A
A
A
A
ØD

ØD

□200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200
ØD

ØD
A
A
A
A

ØD
A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A
ØD

A
A
A
A

ØD
Ø218 ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØD
ØD

Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

ØD ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
Ø157 Ø157
Ø157
Ø157
Ø157
Ø157 ØD
ØD
ØD
ØD
ØD
Ø218

ØD
ØD
ØD
ØD
ØD Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØD
ØD
ØD
Ø218
Ø157
Ø157
Ø157
Ø157
Ø157

□300 □300 □300

□□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200 □□200
□200
□200
□200
200
Outlet Outlet
Flow rate [l/s]
A
A
A
A
A

diameter position
A
A
A
A
A
A

A
A
A
A
A

□200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200
A

A
A
A
A
A
ØD

A
A
A
A
A
A
A
A
A
A

øD A = 65 [mm] A = 91 [mm] A = 125 [mm] A = 153 [mm] A = 180 [mm]

A
A
A
A

A
A
A
A

A
A
A
A
ØD
ØD
ØD
ØD
ØD

A
A
A
A

75 2.7 3.0 3.0 3.1 3.3

ØD
ØD
ØD
ØD
ØD
ØD

A
A
A
A

A
A
A
A
ØD

Vertical
ØD
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD

110 3.5 4.0 4.1 4.2 4.4

ØD
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157 Ø157
Ø157
Ø157
Ø157 ØD
ØD
ØD
ØD
□□300
□300
□300
□300
300 □□300
□300
□300
□300
300 □□300
□300
□300
□300
300 Ø157□□300
Ø157
Ø157
Ø157 □300
□300
□300
300 □□300
□300
□300
□300
300 □□300
□300
□300
□300
300
ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

□200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200 □200
□200
□□200
200
A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A
A
A
A
A

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218 Ø218
Ø218
Ø218
Ø218
Ø218 ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD

Ø218
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218
Ø218

□□300
□300
□300
□300
300 □□300
□300
□300
□300
300 □□300
□300
□300
□300
300 □□300
□300
□300
□300
300 □□300
□300
□300
□300
300 □□300
□300
□300
□300
300
Outlet Outlet
Flow rate [l/s]
diameter position
A
A
A
A
A

□300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300
A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

A
A
A
A
A
A
A
A
A
A

øD A = 52 [mm] A = 82 [mm] A = 97 [mm] A = 127 [mm] A = 157 [mm]

A
A
A
A

A
ØD A A
A

A
A
A
A

A
A
A
A
ØD
ØD
ØD
ØD

A
A
A
A
ØD
ØD
ØD
ØD
ØD

75 2.6 2.9 3.0 3.1 3.3

A
A
A
A
ØD
ØD
ØD
ØD
ØD

Horizontal
ØD
ØD
ØD
ØD
ØD

110 2.8 3.3 3.6 4.0 4.4

ØD
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218 Ø218
Ø218
Ø218
Ø218 ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218

□300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300 □300
□300
□□300
300
A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A
A
A
A
A

77
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
□300 □300 □300 □300 □300 □300

□200 □200 □200 ØD

ØDØD
ØD


ØD
ØDØD
ØD Ø142
Ø142
Ø142
Ø142
Flow rates and Construction heights

A
ØD
ØD
ØD

A
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØDØD
ØD

A
Ø142
Ø142
Ø142
Ø142

A
ØD
ØDØD
ØD

Flow rates and Construction heights

Ø142
Ø142
Ø142
Ø142
A

Ø142
Ø142
Ø142
Ø142 ØD
ØDØD
ØD

A
A
Ø142
Ø142
Ø142
Ø142

ØD
□200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200

A
A
A
A

A
A
A
ØD

A
ØD
Flow rates and Construction heights

A
A
A
A

A
A
A

A
A
A
A

A
ØD

ØD

A
A
A
A
Ø218
Ø218 200
□□□200
□200
200

ØD
ØD
ØD
ØD
200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200
ØD ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
Ø218 Ø218 ØD

A
A
A
A

ØD
ØD
ØD
ØD
A
A
A
A
ACO hygienic gully 218 – fixed height Ø218

A
A
A

ØD
ØD
ØD

A
A
A
A
ØD
A
A
A
A
ØD

A
A
A
A
Ø218

□300 □300 □300 □300 □300 □300 □300 □300 □300

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
□200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200 □200
□□200
□200 200
A

Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD
A

A Ø142
Ø142
Ø142
Ø142
ØD
ØD
ØD
ØD

A
A

A
A
A
A
Ø142
Ø142
Ø142
Ø142 ØD
ØD
ØD
ØD

A
A

ØD
A
A
A
A

A
A
A
Ø142
Ø142
Ø142
Ø142

A
A
A
A

A
A
A
ØD

A
A
A
A
ØD

200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200

ØD

ØD
A
A
A
A

A
A
A
A

ØD
A
A
A

A
A
A
A

A
A
A
A
A
A
A
A
ØD ØD
ØDØD
ØD

ØD
ØD
ØD
ØD
ØD
ØDØD
ØD
Ø218 Ø157
Ø157
Ø157
Ø157

ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
ACO gully

ØD
ØD
ØD
ØD
ØD
ØDØD
ØD ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157 Ø157
Ø157
Ø157 ØD
ØDØD
ØD
Ø157
ØD
Outlet Outlet Outlet Outlet

ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
Ø218 Flow rate [l/s] Flow rate [l/s]
ØD
ØDØD
ØD


ØD
diameter position
Ø218
diameter position Ø157
Ø157
Ø157
Ø157

øD □200
□□200
□200 200 A = 200 [mm] □200
□□200
□200 200 øD 200200200
200
□ □ □□ □200
□□200
□200 200 A = 177 [mm]200200200
200
□ □ □□ □200
□□200
□200 200

□300 □300 □300

110 5.0 110□□□200 Horizontal 4.4
A
A
A
A

A
A
A

Vertical
A

200
□□□200
□200
200 200
□□□200
□200
200 200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200 200
□□□200
□200
200

A
A
A
A

A
A
A
A
160 5.0

A
A
A
A
A
A
A
A
A
A
A
A
A

A
A
A
A
A

A
A
A
A
A

ØD
ØD
ØD

A
A
A
A
ØD

ØD

ØD
ØD
ØD

A
A
A
A
ØD

A
A
A
A
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
ACO hygienic gully 218 – telescopic
ØD

ØD

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
Ø157
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157 Ø157
Ø157
Ø157
Ø157 ØD
ØD
ØD
ØD
□300
□□300
□300 300 □300
□□300
□300 300 □300
□□300
□300 300 Ø157
Ø157
Ø157
Ø157 □300
□□300
□300 300 □300
□□300
□300 300 □30
□□3
□300
ØD
ØD
ØD
ØD
Ø157
Ø157
Ø157
Ø157
A
A
A
A

A
A
A

A
A
A
A

A
A
A
A

A
A
A
200
200
□200
200 200
200
□200
200 200
200
□200
200 200
200
□200
200 200
200
□200
200 200
200
□200
200

A
□□□ □□□ □□□ □□□ □□□ □□□

A
A
A
A
A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A
A
A
A
A
ØD
ØD
ØD
ØD

ØD
ØDØØ
ØD
ØD
ØD
ØD

ØD
ØDØD
ØD
Ø21
Ø2
Ø
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD

Ø218
ØD
ØDØD
ØD ØD
ØD
ØD

ØD
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218

ØD
ØD
ØD
ØD
Ø218 Ø218
Ø218
Ø218
Ø218 ØD
ØDØD
ØD
Ø218
Ø218
Ø218
Ø218
ØD
ØDØD
ØD
Ø218
Ø218
Ø218
Ø218

□300
□□300
□300 300 □300
□□300
□300 300 □300
□□300
□300 300 □300
□□300
□300 300 □300
□□300
□300 300 □30
□□3
□300

Outlet Outlet
Flow rate [l/s]
A
A
A
A

300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300
A
A
A
A

diameter position
A
A
A
A

A
A
A
A

A
A
A
A
A
A
A
A
A
A
A
A

ØD A
A
A A

A
A
A
A

øD A = 65 [mm] A = 91 [mm] A = 125 [mm] A = 153 [mm] A = 180 [mm]

A
A
A
A
ØD
ØD
ØD

A
A
A
A

A
A
A
A
ØD
ØD
ØD
ØD

110 5.0 5.5 5.6 5.8 6.2

ØD
ØD
ØD
ØD

Vertical
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD
160 5.0 5.5 5.6 5.8 6.2

ØD
ØD
ØD
ØD
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218 Ø218
Ø218
Ø218
Ø218 ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218
ØD
ØD
ØD
ØD
Ø218
Ø218
Ø218
Ø218

300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300 300
□□□300
□300
300
A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A

A
A
A
A
A
A
A
A
ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

ØD
ØD
ØD
ØD

Outlet Outlet
Flow rate [l/s]
diameter position
øD A = 72 [mm] A = 98 [mm] A = 132 [mm] A = 156 [mm] A = 187 [mm]
110 Horizontal 4.4 4.6 4.8 4.9 5.4

78
 Flow rates and Construction heights
Notes 

Notes

ACO gully


79
  ACO channel
Content
ACO channel
 


80
 ACO channel
Content

ACO channel Page

Hygienic design 82
Introduction
System overview 83

Introduction 84

ACO hygienic box channel - standard articles 86

ACO hygienic box channel - semi-standard 89

ACO vinyl box channel - standard articles 90

ACO vinyl box channel - semi-standard 92

ACO box channel ACO hygienic cast grating 93

        
ACO hygienic ladder grating 94

ACO mesh grating 98

ACO hygienic slot cover 100

Accessories for ACO hygienic box channel 102

ACO customized box channel 103

Introduction 108

ACO slot channel ACO slot channel - semi-standard 110

ACO customized slot channel 111

Introduction 116

ACO modular box channel 125 - standard articles 120

Gratings for ACO modular box channel 125 126

Accessories for ACO modular box channel 125 130

ACO modular box channel 200 - standard articles 131

ACO modular channel
Gratings for ACO modular box channel 200 139

Accessories for ACO modular box channel 200 142

ACO modular slot channel 20 - standard articles 143

Accessories for ACO modular slot channel 20 148

ACO modular channel - semi-standard 149

ACO design channel ACO design channel 150

Flow rates Flow rates and Construction heights 151

81
 Introduction
Hygienic design

Hygienic design

ACO offers sustainable, integrated drainage ACO hygienic drainage fulfils stringent ACO channel hygienic features:
systems which are designed to protect your hygienic requirements to prevent harmful § Fully drainable
business, the environment and ultimately bacterial contamination. We apply § Internal radii equal or larger than 3 mm
public health. Our aim is to constantly the relevant hygienic design principles § Hygienic joints
improve every aspect of safety, hygiene reserved for food contact surfaces § Edge infill
and functional performance. EN 1672, EN ISO 14159, EHEDG § Stainless steel grade min. AISI 304
documentto the channel design. § Fully pickled and passivated
We believe that our systems and services
are truly unique, delivering unparalleled
benefits to everyone involved in project
delivery or subsequent operation.

Hygienic slip resistant gratings

ACO channel

Hygienic joints: deep-drawn

body ensures smooth contours
eliminating crevices that can
harbour dangerous bacteria

All internal radii equal or

larger than 3mm which
greatly increases cleaning
effectiveness V shape bottom for
width ≤ 300 mm

Full drainability: Dry sump

design, completely drainable
- eliminating stagnant water,
smells, microbial growth and
potential chemical hazards
Edge in-fill ensures stable and Reinforced bottom
durable transmission between for width ≥ 400 mm
the gully and surrounding floor
and helps to minimize risk
of floor cracks which could
harbour microorganism

82
 Introduction
System overview

System overview

ACO channel

1 1 1

2 2 2

ACO channel
ACO box channel ACO slot channel ACO modular box channel

1 Gratings 3
2 Silt basket
3 Friction ring 4
4 Foul air trap
5 Foul air trap support
6 ACO gully 5

ACO gully
with accessories

83
  ACO box channel
Introduction

Introduction

ACO box channel portfolio

The ACO box channel range includes channels The unique variability of the whole portfolio
for all common applications and all makes it easy to choose a channel that suits
common floor types (concrete, tiles, resin a customer’s specific needs. Channel length,
or vinyl). The ACO box channel portfolio depth and outlet position are just a few of
is designed with respect to hygienic design the parameters which can be varied and,
requirements. Selecting a channel from the regardless of the variations specified, there
range is easy. is no impact on delivery lead times.

ACO box channel ordering

The dimensions of the ACO box channel ACO box channels with fixed dimensions
can be easily specified in respect of are also available. These dimensions are a
project requirements. To specify the selection of most frequently sold ACO box
channel please use the Customization channels. Please see page 85 where you
template (see page 103) which will help can find the overview.
ACO channel

you to identify the information you need,

or contact our Sales/Technical department.


ACO box channel customization

In addition all ACO box channels can be To ask for customised ACO box channel,
designed with: please contact our Sales/technical
§§ Special outlet position department. Please take into consideration
§§ Special depth that ACO channel customization could
§§ Special slope decrease the number of hygienic design



§§ Special channel width features.

§§ L-shape and T-shape lay out
§§ Special side inlets

84
 ACO box channel
Introduction

ACO box channel system overview

ACO box channel - fixed height solution

ACO channel
ACO hygienic box channel ACO hygienic box channel ACO vinyl box channel
Standard edge Extended edge

ACO box channel - telescopic solution

ACO hygienic box channel ACO hygienic box channel ACO vinyl box channel
Standard edge Extended edge

ACO hygienic gully

with accessories

85
 ACO box channel
ACO hygienic box channel - standard articles

ACO hygienic box channel - standard articles

Product information
The dimensions of the ACO hygienic box HygieneFirst features § Tested and certified according
channel for concrete, tiles and resin floor to EN 1253
can be easily specified in respect of § Hygienic design following EN 1672, § V-shape bottom for width < 300 mm
project requirements or easily chosen from EN ISO 14159 and EHEDG document § Reinforced bottom for width > 400 mm
No. 8, 13 and 44 § Outlet without deformation
predefined fixed dimensions.
§ Available in 1.4301 (304) or 1.4404 § Easy and secure telescopic connection
(316L) grades of stainless steel with gully
§ Material thickness 1.5 mm § Adjustable EasyFix levelling feet
§ Fully removable and easily cleanable 60-110 mm
stainless steel foul air trap (FAT)
§ Anchors for fixing in concrete
§ Rubber edge infill
§ Fully pickled and passivated
§ Minimal longitudinal slope 1%
§ Min. sectional slope 5°
§ Material thickness 1.5 mm
§ Hygienic gratings with slip resistance
available
§ Protective cover available.
ACO channel

See page 224 for more details

H2

H1 = 50
Order information
ØD

Standard edge
H2

H1 = 50

Wo
Wi
ØD

Li
Lo

Lo + 100
H2
Wo
Wi

H1 = 50
Extended edge ØD

Li
Lo Lo + 100

Lo + 100
H2

Wo + 100
Wo

Wi
H1 = 50

ØD

Lo + 100 Li
Lo
Wo + 100
Wo

Wi

Channel dimensions Gully Material Standard edge Extended edge

Wo Wi Lo Li H2 øD Item number Item number
Li
[mm] [mm] [mm] [mm] [mm] [mm]
Lo
530 500 1.4301 416584 416680
530 500 1.4404 416602 416698
830 800 1.4301 416585 416681
830 800 1.4404 416603 416699
1030 1000 1.4301 416586 416682
ACO
1030 1000 1.4404 416604 416700
200 170 60 125 hygienic
1230 1200 1.4301 416587 416683
gully 142
1230 1200 1.4404 416605 416701
1530 1500 1.4301 416588 416684
1530 1500 1.4404 416606 416702
2030 2000 1.4301 416589 416685
2030 2000 1.4404 416607 416703

ACO hygienic gully 142  Page 24 Gratings for ACO hygienic box channel  Page 93/94/98/100
86 Accessories for ACO hygienic box channel  Page 102
 ACO box channel
ACO hygienic box channel - standard articles 

Order information

Channel dimensions Gully Material Standard edge Extended edge

Wo Wi Lo Li H2 øD Item number Item number
[mm] [mm] [mm] [mm] [mm] [mm]
530 500 1.4301 416590 416686
530 500 1.4404 416608 416704
830 800 1.4301 416591 416687
830 800 1.4404 416609 416705
1030 1000 1.4301 416592 416688
ACO
1030 1000 1.4404 416610 416706
200 170 60 142 hygienic
1230 1200 1.4301 416593 416689
gully 157
1230 1200 1.4404 416611 416707
1530 1500 1.4301 416594 416690
1530 1500 1.4404 416612 416708
2030 2000 1.4301 416595 416691
2030 2000 1.4404 416613 416709
330 300 1.4301 416614 416710
55
330 300 1.4404 416628 416724
630 600 1.4301 416615 416711
60

ACO channel
630 600 1.4404 416629 416725
1030 1000 1.4301 416616 416712
60
1030 1000 1.4404 416630 416726


ACO
1530 1500 1.4301 416617 416713
300 270 60 142 hygienic
1530 1500 1.4404 416631 416727
gully 157
2030 2000 1.4301 416618 416714
60
2030 2000 1.4404 416632 416728
3030 3000 1.4301 416619 416715
70
3030 3000 1.4404 416633 416729
4030 4000 1.4301 416620 416716
80
4030 4000 1.4404 416634 416730



330 300 1.4301 416621 416717
55
330 300 1.4404 416635 416731
630 600 1.4301 416622 416718
60
630 600 1.4404 416636 416732
1030 1000 1.4301 416623 416719
60
1030 1000 1.4404 416637 416733
ACO
1530 1500 1.4301 416624 416720
300 270 60 200 hygienic
1530 1500 1.4404 416638 416734
gully 218
2030 2000 1.4301 416625 416721
60
2030 2000 1.4404 416639 416735
3030 3000 1.4301 416626 416722
70
3030 3000 1.4404 416640 416736
4030 4000 1.4301 416627 416723
80
4030 4000 1.4404 416641 416737
430 400 1.4301 416642 416738
430 400 1.4404 416648 416744
ACO
630 600 1.4301 416643 416739
400 370 60 142 hygienic
630 600 1.4404 416649 416745
gully 157
830 800 1.4301 416644 416740
830 800 1.4404 416650 416746
430 400 1.4301 416645 416741
430 400 1.4404 416651 416747
ACO
630 600 1.4301 416646 416742
400 370 60 200 hygienic
630 600 1.4404 416652 416748
gully 218
830 800 1.4301 416647 416743
830 800 1.4404 416653 416749

ACO hygienic gully 157  Page 39 Accessories for ACO hygienic box channel  Page 102
ACO hygienic gully 218  Page 51 Gratings for ACO hygienic box channel  Page 93/94/98/100 87
  ACO box channel
ACO hygienic box channel - standard articles

Channel dimensions Gully Material Standard edge Extended edge

Wo Wi Lo Li H2 øD Item number Item number
[mm] [mm] [mm] [mm] [mm] [mm]
530 500 1.4301 416654 416750
530 500 1.4404 416660 416756
ACO
830 800 1.4301 416655 416751
500 470 65 142 hygienic
830 800 1.4404 416661 416757
gully 157
1030 1000 1.4301 416656 416752
1030 1000 1.4404 416662 416758
530 500 1.4301 416657 416753
530 500 1.4404 416663 416759
ACO
830 800 1.4301 416658 416754
500 470 65 200 hygienic
830 800 1.4404 416664 416760
gully 218
1030 1000 1.4301 416659 416755
1030 1000 1.4404 416665 416761
630 600 1.4301 416666 416762
630 600 1.4404 416669 416765
ACO
930 900 1.4301 416667 416763
600 570 70 200 hygienic
930 900 1.4404 416670 416766
gully 218
1230 1200 1.4301 416668 416764
1230 1200 1.4404 416671 416767
ACO 1.4301 416672 416768
800 770 830 800 80 200 hygienic
ACO channel

gully 218 1.4404 416673 416769

 


ACO hygienic gully 157  Page 39 Accessories for ACO hygienic box channel  Page 102
88 ACO hygienic gully 218  Page 51 Gratings for ACO hygienic box channel  Page 93/94/98/100
 ACO box channel
ACO hygienic box channel - semi-standard

ACO hygienic box channel - semi-standard

Product information

The dimensions of the ACO hygienic box HygieneFirst features § Tested and certified according
channel for concrete, tiles and resin floor to EN 1253
can be easily specified in respect of § Hygienic design following EN 1672, § V-shape bottom for width < 300 mm
project requirements. EN ISO 14159 and EHEDG document § Reinforced bottom for width > 400 mm
No. 8, 13 and 44 § Length - up to customer request
§ Available in 1.4301 (304) or 1.4404 § Height - variable 50-200
(316L) grades of stainless steel § Outlet position variable in longitudinal
§ Fully removable and easily cleanable axis
stainless steel foul air trap (FAT) § Standardized widths
§ Rubber edge infill § Easy and secure telescopic connection
§ Fully pickled and passivated with gully
§ Sectional slope of the channel bottom 5° § Adjustable EasyFix levelling feet
§ Longitudinal slope of the channel bottom 60-110 mm
1-5 % § Anchors for fixing in concrete
§ Material thickness 1.5 mm
§ Hygienic gratings with slip resistance
availabale
§ Protective cover available.

ACO channel
See page 224 for more details

H3
H1
Order information

H2
ØD
Standard edge
H3
H1

Wo
Wi
H2

ØD

Lo + 100
Li
H1

H3
Lo
H2

ØD

Extended edge
Wo
Wi

Lo + 100

Lo + 100
Li
H1

H3

Lo
Wo + 100
Wo

Wi
H2

ØD

Lo + 100 Li
Lo
Wo + 100

External (overall) Internal (grating) Height at outlet of Height at end of

Wo

Wi

Length of channel
width width channel channel
Wo [mm] Wi [mm] Lo H2 H1 and H3
Li
200 170
Lo
300 270
400 370
Variable
* 50-200 50, 80, 110, 140
500 470
600 570
800 770

* Long channels over 6m are standard divided in 6m sections with transport joins.

In case of one piece channel requirement, channels have to be welded on site. Please contact our Sales/Technical department.

ACO hygienic gully 142  Page 24 Accessories for ACO hygienic box channel  Page 102
ACO hygienic gully 157  Page 39 Gratings for ACO hygienic box channel  Page 93/94/98/100 89
ACO hygienic gully 218  Page 51
 ACO box channel
ACO vinyl box channel - standard articles

ACO vinyl box channel - standard articles

Product information

The dimensions of the ACO vinyl box § Fully compliant to EN 1253

channel can be specified in respect of § Available in 1.4301 (304) or 1.4404
project requirements or easily chosen from (316L) grades of stainless steel, pickled
predefined fixed dimensions.
and passivated
§ Material thickness 1.5 mm
§ Easy and secure telescopic connection
with gully
§ Adjustable EasyFix levelling feet
60-110 mm
§ Anchors for fixing in concrete
§ Protective cover available.
See page 224 for more details

H2

H1 = 50
Order information
ACO channel

ØD

Vinyl edge
H2

Wo

Wi
H1 = 50

ØD

Li
Lo
Wo

Wi

Channel dimensions Gully Material Vinyl edge

Wo Wi Lo Li H2 øD Item number
[mm] [mm] [mm] [mm] [mm] [mm]
Li
550 500 1.4301 413358
Lo
550 500 1.4404 413376
850 800 1.4301 413359
850 800 1.4404 413377
1050 1000 1.4301 413360
ACO
1050 1000 1.4404 413378
220 170 60 125 hygienic
1250 1200 1.4301 413361
gully 142
1250 1200 1.4404 413379
1550 1500 1.4301 413362
1550 1500 1.4404 413380
2050 2000 1.4301 413363
2050 2000 1.4404 413381
550 500 1.4301 413364
550 500 1.4404 413382
850 800 1.4301 413365
850 800 1.4404 413383
1050 1000 1.4301 413366
ACO
1050 1000 1.4404 413384
220 170 60 142 hygienic
1250 1200 1.4301 413367
gully 157
1250 1200 1.4404 413385
1550 1500 1.4301 413368
1550 1500 1.4404 413386
2050 2000 1.4301 413369
2050 2000 1.4404 413387

ACO hygienic gully 142  Page 24 Accessories for ACO vinyl box channel  Page 102
90 ACO hygienic gully 157  Page 39 Gratings for ACO vinyl box channel  Page 93 / 94 / 98 / 100
 ACO box channel
ACO vinyl box channel - standard articles 
Channel dimensions Gully Material Vinyl edge
Wo Wi Lo Li H2 øD Item number
[mm] [mm] [mm] [mm] [mm] [mm]
350 300 1.4301 413388
350 300 1.4404 413402
650 600 1.4301 413389
650 600 1.4404 413403
1050 1000 1.4301 413390
60
1050 1000 1.4404 413404
ACO
1550 1500 1.4301 413391
320 270 142 hygienic
1550 1500 1.4404 413405
gully 157
2050 2000 1.4301 413392
2050 2000 1.4404 413406
3050 3000 1.4301 413393
70
3050 3000 1.4404 413407
4050 4000 1.4301 413394
80
4050 4000 1.4404 413408
350 300 1.4301 413395
350 300 1.4404 413409
650 600 1.4301 413396
650 600 1.4404 413410
1050 1000 1.4301 413397
60
1050 1000 1.4404 413411

ACO channel
ACO
1550 1500 1.4301 413398
320 270 200 hygienic
1550 1500 1.4404 413412
gully 218


2050 2000 1.4301 413399
2050 2000 1.4404 413413
3050 3000 1.4301 413400
70
3050 3000 1.4404 413414
4050 4000 1.4301 413401
80
4050 4000 1.4404 413415
450 400 1.4301 413416
450 400 1.4404 413422
ACO
650 600 1.4301 413417
420 370 60 142 hygienic



650 600 1.4404 413423
gully 157
850 800 1.4301 413418
850 800 1.4404 413424
450 400 1.4301 413419
450 400 1.4404 413425
ACO
650 600 1.4301 413420
420 370 60 200 hygienic
650 600 1.4404 413426
gully 218
850 800 1.4301 413421
850 800 1.4404 413427
530 500 1.4301 413428
530 500 1.4404 413434
ACO
830 800 1.4301 413429
520 470 65 142 hygienic
830 800 1.4404 413435
gully 157
1030 1000 1.4301 413430
1030 1000 1.4404 413436
550 500 1.4301 413431
550 500 1.4404 413437
ACO
850 800 1.4301 413432
520 470 65 200 hygienic
850 800 1.4404 413438
gully 218
1050 1000 1.4301 413433
1050 1000 1.4404 413439
650 600 1.4301 413440
650 600 1.4404 413443
ACO
950 900 1.4301 413441
620 570 70 200 hygienic
950 900 1.4404 413444
gully 218
1250 1200 1.4301 413442
1250 1200 1.4404 413445
ACO 1.4301 413446
820 770 850 800 80 200 hygienic
gully 218 1.4404 413447

ACO hygienic gully 157  Page 39 Accessories for ACO vinyl box channel  Page 102
ACO hygienic gully 218  Page 51 Gratings for ACO vinyl box channel  Page 93 / 94 / 98 / 100 91
 ACO box channel
ACO vinyl box channel - semi-standard

ACO vinyl box channel - semi-standard

Product information

The dimensions of the ACO vinyl box § Fully compliant to EN 1253 § Longitudinal slopes of the channel
channel can be easily specified in respect § Available in 1.4301 (304) or 1.4404 bottom 1-5 %
of project requirements. (316L) grades of stainless steel, pickled § Adjustable EasyFix levelling feet
and passivated 60-110 mm
§ Material thickness 1.5 mm § Anchors for fixing in concrete
§ Height variable 50-200 mm § Protective cover available.
§ Length – up to customer request See page 224 for more details
§ Standardized widths
§ Outlet position central or variable in
longitudinal axis

H1

H3
H2
Order information ØD

Vinyl edge
ACO channel

H1

H3

Wo

Wi
H2

ØD

Li
Wo

Wi

External (overall) Internal (grating) Height at outlet of Height at end of

Length of channel
width width channel channel
Wo [mm] Wi [mm] Li H2 H1 and H3
230 170 Li

330 270
430 370
Variable
* 50-200 50, 80, 110, 140
530 470
630 570
830 870

* Long channels over 6m are standard devided in 6m sections with transport joins.

In case of requirements one piece channel, channels have to be welded on site. Please contact our Sales/Technical department.

ACO hygienic gully 142  Page 24 Accessories for ACO vinyl box channel  Page 102
92 ACO hygienic gully 157  Page 39 Gratings for ACO vinyl box channel  Page 93 / 94 / 98 / 100
ACO hygienic gully 218  Page 51
 ACO box channel
ACO hygienic cast grating

Lo
ACO hygienic cast grating

Product information

HygieneFirst features § Tested and certified according

Wo
to EN 1253
§ Hygienic design following EN 1672, § Range of gratings suitable for load class
EN ISO 14159 and EHEDG document M 125 (EN 1253)Lo
No. 8, 13 and 44 § Slip resistant
§ Available in 1.4301 (304) grade of § Low potential for slip according to
stainless steel BS 7976-2,
Length
§ Fully pickled and passivated § R13 according to DIN 51130
§ Electropilished surface

Wo
§ Frameless design for optimum
drainability and cleanibility

Width
Order information - Load class M 125

Lo Length

Frame height

Bar height

ACO channel
E

G
Width
Wo

Frame height

Bar height
E

Length

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
Width

number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

530 20 30 168 499 1.4301 416947 1

830 20 30 168 398 1.4301 416948 2
1030 20 30 168 499 1.4301 416947 2
Frame height

200
Bar height

1230 20 30 168 398 1.4301 416948 3

E

1530 20 30 168 499 1.4301 416947 3

2030 20 30 168 499 1.4301 416947 4
330 20 30 268 298 1.4301 416946 1
630 20 30 268 298 1.4301 416946 2
1030 20 30 268 499 1.4301 416945 2
300 1530 20 30 268 499 1.4301 416945 3
2030 20 30 268 499 1.4301 416945 4
3030 20 30 268 499 1.4301 416945 6
4030 20 30 268 499 1.4301 416945 8

93
 ACO box channel
ACO hygienic ladder grating

ACO hygienic ladder grating

Product information

HygieneFirst features § Range of gratings suitable for load Lo

classes R 50, M 125 and N 250
§ Hygienic design following EN 1672, (EN 1253)
EN ISO 14159 and EHEDG document § Tested and certified according
No. 8, 13 and 44 to NSF International
§ Fully pickled and passivated § High flow capacity
§ Electropolished surface § Rounded corners

Wo
§ Registered logo design allows for easy § Slip resistant
manipulation during cleaning Lo
§ Low potential for slip according to
BS 7976-2,
§ R11 according to DIN 51130

Length

Wo

Width
ACO channel

Order information - Load class R 50

Lo Length

Frame height

Bar height
E

G
Width

Frame height

Bar height
G
Wo

E
Frame height

Bar height
E

Length
Frame height

Bar height
G
E

Channel dimension Grating dimension

Quantity
Item
Wo
Width

Lo Frame height Bar height Width Length Material to fill

number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416802
530 20 20 168 499 1
1.4404 416803
Frame height

Bar height

1.4301 416808
830 20 20 168 398 2
E

1.4404 416809
1.4301 445948
1030 20 20 168 999 1
Frame height

Bar height

1.4404 445949
G
E

1.4301 416802
1030 20 20 168 499 2
1.4404 416803
200
1.4301 416808
1230 20 20 168 398 3
1.4404 416809
1.4301 416802
1530 20 20 168 499 3
1.4404 416803
1.4301 445948
2030 20 20 168 999 2
1.4404 445949
1.4301 416802
2030 20 20 168 499 4
1.4404 416803

94
 ACO box channel
ACO hygienic ladder grating 
Order information - Load class R 50

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416812
330 20 20 268 298 1
1.4404 416813
1.4301 416812
630 20 20 268 298 2
1.4404 416813
1.4301 445952
1030 20 20 268 999 1
1.4404 445953
1.4301 416814
1030 20 20 268 499 2
1.4404 416815
1.4301 416814
1530 20 20 268 499 3
1.4404 416815
1.4301 445952
300 2030 20 20 268 999 2
1.4404 445953
1.4301 416814

ACO channel
2030 20 20 268 499 4
1.4404 416815
1.4301 445952


3030 20 20 268 999 3
1.4404 445953
1.4301 416814
3030 20 20 268 499 6
1.4404 416815
1.4301 445952
4030 20 20 268 999 4
1.4404 445953
1.4301 416814
4030 20 20 268 499 8
1.4404 416815



1.4301 416820
430 30 30 368 398 1
1.4404 416821
1.4301 416822
400 630 30 30 368 598 1
1.4404 416823
1.4301 416820
830 30 30 368 398 2
1.4404 416821
1.4301 416828
530 30 30 468 499 1
1.4404 416829
1.4301 416830
500 830 30 30 468 398 2
1.4404 416831
1.4301 416828
1030 30 30 468 499 2
1.4404 416829
1.4301 416838
630 30 30 568 298 2
1.4404 416839
1.4301 416838
600 930 30 30 568 298 3
1.4404 416839
1.4301 416838
1230 30 30 568 298 4
1.4404 416839
1.4301 416842
800 830 30 30 768 398 2
1.4404 416843

95
  ACO box channel
ACO hygienic ladder grating

Order information - Load class M 125

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416804
530 20 30 168 499 1
1.4404 416805
1.4301 416810
830 20 30 168 398 2
1.4404 416811
1.4301 445950
1030 20 20 168 999 1
1.4404 445951
1.4301 416804
1030 20 30 168 499 2
1.4404 416805
200
1.4301 416810
1230 20 30 168 398 3
1.4404 416811
1.4301 416804
1530 20 30 168 499 3
1.4404 416805
1.4301 445950
ACO channel

2030 20 20 168 999 2

1.4404 445951
1.4301 416804


2030 20 30 168 499 4

1.4404 416805
1.4301 416816
330 20 30 268 298 1
1.4404 416817
1.4301 416816
630 20 30 268 298 2
1.4404 416817
1.4301 416818
1030 20 30 268 499 2
1.4404 416819



1.4301 445954
1030 20 20 268 999 1
1.4404 445955
1.4301 416818
1530 20 30 268 499 3
1.4404 416819
1.4301 445954
300 2030 20 20 268 999 2
1.4404 445955
1.4301 416818
2030 20 30 268 499 4
1.4404 416819
1.4301 445954
3030 20 30 268 999 3
1.4404 445955
1.4301 416818
3030 20 30 268 499 6
1.4404 416819
1.4301 445954
4030 20 20 268 999 4
1.4404 445955
1.4301 416818
4030 20 30 268 499 8
1.4404 416819

96
 ACO box channel
ACO hygienic ladder grating 
Order information - Load class M 125

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416824
430 30 30 368 398 1
1.4404 416825
1.4301 416826
400 630 30 30 368 598 1
1.4404 416827
1.4301 416824
830 30 30 368 398 2
1.4404 416825
1.4301 416832
530 30 30 468 499 1
1.4404 416833
1.4301 416834
500 830 30 30 468 398 2
1.4404 416835
1.4301 416832
1030 30 30 468 499 2
1.4404 416833

ACO channel

Order information - Load class N 250

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416844
530 20 30 168 499 1
1.4404 416845



1.4301 416846
830 20 30 168 398 2
1.4404 416847
1.4301 416844
1030 20 30 168 499 2
1.4404 416845
200
1.4301 416846
1230 20 30 168 398 3
1.4404 416847
1.4301 416844
1530 20 30 168 499 3
1.4404 416845
1.4301 416844
2030 20 30 168 499 4
1.4404 416845
1.4301 416850
330 20 30 268 298 1
1.4404 416851
1.4301 416850
630 20 30 268 298 2
1.4404 416851
1.4301 416848
1030 20 30 268 499 2
1.4404 416849
1.4301 416848
300 1530 20 30 268 499 3
1.4404 416849
1.4301 416848
2030 20 30 268 499 4
1.4404 416849
1.4301 416848
3030 20 30 268 499 6
1.4404 416849
1.4301 416848
4030 20 30 268 499 8
1.4404 416849

97
 ACO box channel
ACO mesh grating

ACO mesh grating Lo

Product information
§ ACO mesh grating with slip § Surface - electropolished
resistant finish § High flow capacity of grates
§ Tested and certified according § Rounded corners

Wo
to EN 1253 § Slip resistant
Lo
§ Range of gratings suitable to load class § Slip resistant low potential for slip
L 15 (EN 1253) according to BS 7976-2,
§ R11 according to DIN 51130

Length

Wo

Width
Order information - Load class L 15

Lo Length

Frame height

Bar height
E

G
ACO channel

Width
Wo

Frame height

Bar height
G
E
Frame height

Bar height
E

Length
Frame height

Bar height
Width

Channel dimension Grating dimension

G
E

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416860
530 20 30 168 499 1
Frame height

Bar height

1.4404 416861
E

1.4301 416862
830 20 30 168 398 2
1.4404 416863
1.4301 413153
1030 20 30 168 999 1
1.4404 445957
Frame height

Bar height

1.4301 416860
G
E

1030 20 30 168 499 2

1.4404 416861
200
1.4301 416862
1230 20 30 168 398 3
1.4404 416863
1.4301 416860
1530 20 30 168 499 3
1.4404 416861
1.4301 413153
2030 20 30 168 999 2
1.4404 445957
1.4301 416860
2030 20 30 168 499 4
1.4404 416861

98
 ACO box channel
ACO mesh grating 
Channel dimension Grating dimension
Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 416864
330 20 30 268 298 1
1.4404 416865
1.4301 416864
630 20 30 268 298 2
1.4404 416865
1.4301 413154
1030 20 30 268 999 1
1.4404 445959
1.4301 416866
1030 20 30 268 499 2
1.4404 416867
1.4301 416866
1530 20 30 268 499 3
1.4404 416867
1.4301 413154
300 2030 20 30 268 999 2
1.4404 445959
1.4301 416866
2030 20 30 268 499 4
1.4404 416867
1.4301 413154
3030 20 30 268 999 3

ACO channel
1.4404 445959
1.4301 416866


3030 20 30 268 499 6
1.4404 416867
1.4301 413154
4030 20 30 268 999 4
1.4404 445959
1.4301 416866
4030 20 30 268 499 8
1.4404 416867
1.4301 416868
430 30 30 368 398 1
1.4404 416869



1.4301 416870
400 630 30 30 368 598 1
1.4404 416871
1.4301 416868
830 30 30 368 398 2
1.4404 416869
1.4301 416872
530 30 30 468 499 1
1.4404 416873
1.4301 416874
500 830 30 30 468 398 2
1.4404 416875
1.4301 416872
1030 30 30 468 499 2
1.4404 416873
1.4301 416876
630 30 30 568 298 2
1.4404 416877
1.4301 416876
600 930 30 30 568 298 3
1.4404 416877
1.4301 416876
1230 30 30 568 298 4
1.4404 416877
1.4301 416878
800 830 30 30 768 398 2
1.4404 416879

99
  ACO box channel
ACO hygienic slot cover

ACO hygienic slot cover Lo

Product information
§§ Hygienic design following EN 1672, §§ Rounded corners
 

EN ISO 14159 and EHEDG document §§ Slip resistant

No. 8, 13 and 44 §§ Low potential for slip according

Wo
§§ Fully pickled and passivated to BS 7976-2,
Lo
§§ Sandblasted surface §§ R11 according to DIN 51130
§§ Range of gratings suitable for load
classes R 50, M 125 and N 250
(EN 1253)
Length

Wo

Width
Order information - Load class R 50
 

Lo Length

Frame height

Bar height
E

G
ACO channel

Width


Wo

Frame height

Bar height
G
E
Frame height

Bar height
E

Length
Frame height

Bar height



Width

Channel dimension Grating dimension

G
E

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 445756
530 20 30 168 499 1
Frame height

1.4404 445757
Bar height

445762
E

1.4301
G

830 20 30 168 398 2

1.4404 445763
1.4301 445756
1030 20 30 168 499 2
1.4404 445757
200
1.4301 445762
Frame height

Bar height

1230 20 30 168 398 3

1.4404 445763
G
E

1.4301 445756
1530 20 30 168 499 3
1.4404 445757
1.4301 445756
2030 20 30 168 499 4
1.4404 445757
1.4301 445774
330 20 30 268 298 1
1.4404 445775
1.4301 445774
630 20 30 268 298 2
1.4404 445775
1.4301 445768
1030 20 30 268 499 2
1.4404 445769
300
1.4301 445768
1530 20 30 268 499 3
1.4404 445769
1.4301 445768
2030 20 30 268 499 4
1.4404 445769
1.4301 445768
3030 20 30 268 499 6
1.4404 445769

100
 ACO box channel
Accessories for ACO hygienic box channel 
Order information - Load class M 125

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 445758
530 20 30 168 499 1
1.4404 445759
1.4301 445764
830 20 30 168 398 2
1.4404 445765
1.4301 445758
1030 20 30 168 499 2
1.4404 445759
200
1.4301 445764
1230 20 30 168 398 3
1.4404 445765
1.4301 445758
1530 20 30 168 499 3
1.4404 445759
1.4301 445758
2030 20 30 168 499 4
1.4404 445759
1.4301 445776
330 20 30 268 298 1
1.4404 445777
1.4301 445776
630 20 30 268 298 2

ACO channel
1.4404 445777
1.4301 445770
1030 20 30 268 499 2


1.4404 445771
300
1.4301 445770
1530 20 30 268 499 3
1.4404 445771
1.4301 445770
2030 20 30 268 499 4
1.4404 445771
1.4301 445770
3030 20 30 268 499 6
1.4404 445771



Order information - Load class N 250

Channel dimension Grating dimension

Quantity
Item
Wo Lo Frame height Bar height Width Length Material to fill
number
[mm] [mm] E [mm] G [mm] [mm] [mm] channel

1.4301 445760
530 20 30 168 499 1
1.4404 445761
1.4301 445766
830 20 30 168 398 2
1.4404 445767
1.4301 445760
1030 20 30 168 499 2
1.4404 445761
200
1.4301 445766
1230 20 30 168 398 3
1.4404 445767
1.4301 445760
1530 20 30 168 499 3
1.4404 445761
1.4301 445760
2030 20 30 168 499 4
1.4404 445761
1.4301 445778
330 20 30 268 298 1
1.4404 445779
1.4301 445778
630 20 30 268 298 2
1.4404 445779
1.4301 445772
1030 20 30 268 499 2
1.4404 445773
300
1.4301 445772
1530 20 30 268 499 3
1.4404 445773
1.4301 445772
2030 20 30 268 499 4
1.4404 445773
1.4301 445772
3030 20 30 268 499 6
1.4404 445773

101
  ACO box channel
Accessories for ACO box channels

Accessories for ACO box channels

Ød1
Silt baskets for ACO hygienic box channel
ØD

h1
Ød1

ØD
Ød1
Ød1

h1
Wo

h1
ØD

h1
Ød1

Wo

h1
Channel dimension Direction of Silt basket
Ød1dimension Capacity Item
Material
gully outlet number
Wo

Width Wo [mm] Outlet øD [mm] ød1 [mm] h1 [mm] [l]

h1
1.4301 416900
200, 300, 400, 45 0.4
125 vertical, horizontal 142
500, 600, 800 1.4404 416901

1.4301 416900
ACO channel

vertical 142 45 0.4

1.4404 416901


142
1.4301 416902
200 horizontal 142 25 0.3
1.4404 416903

1.4301 416902
welded with
vertical, horizontal 142 25 0.3
ACO hygienic gully 142 1.4404 416903

142 1.4301 416904




vertical 159 50 0.6

1.4404 416905
300, 400, 500, or
600, 800 1.4301 416906
welded with horizontal 159 26 0.3
ACO hygienic gully 157 1.4404 416907

200 1.4301 416908

vertical 222 50 1.4
1.4404 416909
300, 400, 500, or
600, 800 1.4301 416910
welded with horizontal 222 26 0.7
ACO hygienic gully 218 1.4404 416911

102
 ACO box channel
ACO customized box channel 
ACO customized box channel

Product information

The dimensions of the ACO customized §§ Available in 1.4301 (304) or 1.4404 §§ Longitudinal slopes of the channel
box channel for concrete, tiles and resin (316L) grades of stainless steel, pickled bottom 1-5 %
floor can be easily specified in respect of and passivated §§ Outlet position central or variable in
project requirements. §§ Material thickness 1.5 mm or 2 mm longitudinal axis or eccentric outlet
§§ Width – up to customer request §§ Adjustable EasyFix levelling feet
§§ Length – up to customer request §§ Anchors for fixing in concrete
§§ Depth – up tu customer request §§ Protective cover available for
§§ Variable shape of channel – T shape, recommended channel widths.
L shape, … See page 224 for more details

Instruction
▪ ▪ Please define channel dimensions by ▪ ▪ For Industrial Drainage information, Yellow entry fields highlight
filling out required entry fields. visit ACO Building Drainage web hygienic design options
▪ ▪ For technical support, please contact
customerservice@aco.cz White entry fields highlight
non-hygienic design options

ACO channel
Step 1 - Material


Stainless steel grade 1.4301 (AISI 304) Stainless steel grade 1.4404 (AISI 316L)

Step 2 - Edge profile

telescopic welded

Detail of the Edge profile

ød2



horizontal
F
øD

Standard edge Extended edge L-profile edge ød1

A A D A 10 30
Ø5
10
H

vertical
15

øD
E*

E*

E*

30
10

Wo Li
A A D D 50 Wi L1 L2, L3
10

Edge infill type Edge infill type Edge infill type

10
E*

15

15
E*

E*

E*

E*

H1
H2

H2

H2

A 10 30
Ø5

Rubber edge infill Rubber edge infill Rubber edge infill

E*
E

30

< alternative >

10

ød
Steel edge infill Steel edge infill Steel edge infill

No edge infill No edge infill No edge infill

ød2
ød2
horizontal horizontal
Edge width (A) Edge width (A) Edge widthLt(A)
telescopic welded
øD

øD

H1

15 mm 15 mm 15 mm
vertical vertical
** ** **
Custom:
øD mm Custom:
øD mm Custom: mm
ød1

Flange length (D)

50 mm

* Sitting height for gratings (E) is defined in step 7 Custom: mm

** For hygienic solution, check with technical support

103
  ACO box channel
ACO customized box channel

Step 2 - Edge profile

Folded edge Folded edge with flange Vinyl edge

D 50
10
E*

15
E*

E*
Flange length (D)

50 mm

Custom: mm

Step 3 - Channel dimensions

Li
ACO channel

L1 L2, L3

H3
H1

H2

H2


alternative
telescopic or
<
<
Wo ød fixed height
Wi solution
H2



Width Channel height at outlet Channel Length

Overall (Wo) / Internal (Wi) (H2) (Li)

200 mm / 170 mm
mm mm
(valid for edge width 15 mm)

300 mm / 270 mm
Slope Number of outlets
(valid for edge width 15 mm)
and their spacing
400 mm / 370 mm (L1, L2, L3, L4)
No
(valid for edge width 15 mm)

500 mm / 470 mm L1: mm

Yes - 1%
(valid for edge width 15 mm)

600 mm / 570 mm L2: mm

(valid for edge width 15 mm)
Yes - height defined
(If you require values below 50 mm,
800 mm / 770 mm please contact technical support)
L3: mm
(valid for edge width 15 mm)
H1: mm
Custom: L4: mm
(For channel with standard edge width
of 15 mm subtract 30 mm from overall H3: mm For higher number of outlets, please contact
width as value for internal width) technical support

Wo: mm

Wi: mm

104
 ACO box channel
ACO customized box channel 

Step 4 - Gully construction

Welded gully Telescopic gully

ød2
ød2
horizontal horizontal

welded telescopic
øD

øD
vertical vertical

øD øD

ACO channel
Outlet orientation and dimensions Location flange


(For telescopic gully only)

Vertical outlet Horizontal outlet

(ød2 / øD) (ød2 / øD)

142 / 75 (1.4 l/s) 142 / 75 (1.4 l/s)

142 / 110 (1.6 l/s) 142 / 110 (1.6 l/s) Bonding flange



(For telescopic gully only)

157 / 75 (2.7 l/s) 157 / 75 (2.6 l/s)

157 / 110 (3.5 l/s) 157 / 110 (2.8 l/s)

218 / 110 (5.0 l/s) 218 / 110 (4.4 l/s)

Mechanical clamping flange

218 / 160 (5.0 l/s) (For telescopic gully only)

Without gully (outlet pipe only) Outlet diameter (ød1) Outlet length (F)

75 mm 36 mm

110 mm 58 mm

125 mm 150 mm
F

ød1 142 mm Custom: mm

200 mm

105
 ACO box channel
ACO customized box channel

Step 5 - Accessories

Foul air trap included Silt basket included

Yes Yes

No No

Raising piece included

Yes With Location flange With Bonding flange With Mechanical clamping flange

No
ACO channel

ACO EasyFix ACO Protective covers

levelling feet height (H) included

80 mm (standard) Yes

110 mm No
H

170 mm

Channel with height at outlet

200 mm above 200 mm are supplied
with durable stainless steel
levelling feet
250 mm

300 mm

Step 6 - Delivery requirements

Maximum transport length Lt

(Lt)

6000 mm (standard)

3000 mm

2000 mm

Transport connection type

Welded on site

Bolted on site

106
 ACO box channel
ACO customized box channel

Step 7 - Gratings

ACO hygienic ladder ACO hygienic cast ACO mesh grating

grating grating

Slip Slip
Plain Slip resistant Plain
resistant resistant

Load class Load class Load class

R 50 M 125 (max. Wo = 300) L 15

(valid up to Wo = 800 mm) (valid up to Wo = 300 mm) (valid up to Wo = 1000 mm)

M 125 R 50 (max. Wo = 300)

(valid up to Wo = 500 mm) (valid up to Wo = 500 mm)

ACO channel
N 250 M 125 (max. Wo = 300)
(valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

P 400
(Custom)

ACO hygienic slot ACO perforated ACO multi-slot

cover grating 5 grating

Slip resistant Plain Slip resistant

Load class Load class Load class

R 50 L 15 L 15
(valid up to Wo = 300 mm) (valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

M 125 R 50 (max. Wo = 300) R 50 (max. Wo = 300)

(valid up to Wo = 300 mm) (valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

N 250
(valid up to Wo = 300 mm)

ACO heelsafe grating Without gratings

Height of gratings (E)

20 mm
E

25 mm

Plain 30 mm

Load class 40 mm

L 15 (max. Wo = 300)
(valid up to Wo = 300 mm)

107
  ACO slot channel
Introduction

Introduction

ACO slot channel portfolio

The ACO slot channel range covers channels Channel´s length, depth and outlet position
for all common applications and all common are just a few of the parameters which can
floor types (concrete, tiles, resin or vinyl). be varied and, regardless of the variations
Selecting a channel from the range is easy. specified, there is no impact on delivery
The unique variability of the whole portfolio lead times.
allows choosing the right channel according
to all customers’ needs.

ACO slot channel ordering

The dimensions of the ACO slot channel

can be easily specified in respect of
ACO channel

project requirements. To specify the

channel please use the Customization


template (see page 111) which will help

you to identify the information needed or
contact our Sales/Technical department.



ACO slot channel customization

In addition all ACO slot channel can be To request customised ACO slot channel,
designed with: please contact our Sales/technical
§§ Special outlet position department.
§§ Special depth
§§ Special slope
§§ Special slot channel width
§§ L-shape and T-shape layout
§§ Special side inlets

108
 ACO slot channel
Introduction

ACO slot channel system overview

ACO slot channel - fixed height solution

ACO channel
ACO slot channel - telescopic solution

109
 ACO slot channel
ACO slot channel - semi-standard

ACO slot channel - semi-standard

Product information

The dimensions of the ACO slot channel § Tested and certified according § Longitudinal slopes of the channel
for concrete, tiles and resin floor can to EN 1253 bottom 1-5 %
be easily specified in respect of project § Available in 1.4301 (304) or § Standardized widths
requirements. 1.4404 (316L) grades of stainless steel, § Outlet position central or variable
pickled and passivated in longitudinal axis
Lo
Wi 200x2
§ 1.5 mm material thickness § Adjustable EasyFix levelling feet
§ ACO slot channel 8 or 20 mm § Anchors for fixing in concrete

H1

H3
§ Length – up to customer request § Protective cover available.
See page 224 for more details

H2
Ød

Order information

Lo
Wi 200x200
A
ACO channel

L1
H1

H3

H1

H2
H2

Ød

ØD

External (overall) Height at outlet of Height at end of Wo

Dimension of edge Length of channel
width A channel channel Wi

Wi [mm] A [mm] Lo H2 H1 and H3

A

50-200 50-200
20 15 *
Variable
8 folded 50-200 50-200

* The maximum transportable length of channel is 6 000 mm. Long channels over 6 000 mm are standardly divided in 6 m sections with transport joins.

ACO hygienic gully 142  Page 24 ACO gully EG150  Page 59 / Accessories  Page 75 / 148
110 ACO hygienic gully 157  Page 39 Gratings for gully top  Page 61
ACO hygienic gully 218  Page 51
 ACO slot channel
ACO customized slot channel 
ACO customized slot channel

Product information

The dimensions of the ACO customized §§ Tested and certified according §§ Outlet position central or variable in
slot channel for concrete, tiles and resin to EN 1253 longitudinal axis
floor can be easily specified in respect of §§ Available in 1.4301 (304) or §§ Adjustable EasyFix levelling feet
project requirements. 1.4404 (316L) grades of stainless steel, §§ Anchors for fixing in concrete
pickled and passivated §§ Protective covers available for gully
§§ 1.5 mm material thickness tops. See page 224 for more details
§§ Slot of channel 8 or 20
§§ Length – up to customer request
§§ Longitudinal slopes of the channel
bottom 1-5 %

Instructions Wo Li
Wi 8, 20 L1 L2, L3
▪ ▪ Please define channel design by filling out required entry fields Hygienic design principles don’t apply to slot channels.
E*

▪ ▪ For technical support, please contact customerservice@aco.cz

≥70
H2

H1

H2

H2
▪▪ For Industrial Drainage information, visit ACO Building Drainage web

ACO channel
65
< alternative >


Step 1 - Material
ød1 ød1
Stainless steel grade 1.4301 (AISI 304) Stainless steel grade 1.4404 (AISI 316L)
telescopic welded
Lt
øD2
Step 2 - Edge profile
horizontal
H1
øD

Detail of the Edge profile



vertical
Standard edge øD
Extended edge L-profile
ød1edge
A A D 1510 30
Ø5
10

15

30
10

Edge infill type Edge infill type Edge infill type

Rubber edge infill Rubber edge infill Rubber edge infill

Steel edge infill Steel edge infill Steel edge infill

No edge infill No edge infill No edge infill

Edge width (A) Edge width (A)

15 mm 15 mm

25 mm 25 mm

Flange length (D)

50 mm

Custom: mm

111
  ACO slot channel
ACO customized slot channel

Step 2 - Edge profile

Folded edge Folded edge with flange Vinyl edge

D 50
10

15
Flange length (D)

50 mm

Custom: mm

Step 3 - Channel dimensions

ACO channel

Li

L1 L2, L3


H3
H1

H2

H2
Wo
alternative
Wi A telescopic or <
<
fixed height
solution
H2

70

ød1



65

ød1

Gully top dimensions Slot width Channel height at outlet Channel Length
Guly top (Wo) / Outlet (ød2) (A) (H2) (Li)

200 x 200 mm / 75 mm
8 mm mm mm
(valid for edge width 15 mm)

200 x 200 mm / 110 mm

20 mm Slope Number of outlets
(valid for edge width 15 mm)
and their spacing
200 x 200 mm / 125 mm (L1, L2, L3, L4)
No
(valid for edge width 15 mm)

250 x 250 mm / 142 mm L1: mm

Yes - 1%
(valid for edge width 15 mm)

300 x 300 mm / 200 mm L2: mm

(valid for edge width 15 mm)
Yes - height defined
(If you require values below 50 mm,
please contact technical support)
Custom: L3: mm
(For gully top with standard edge width
of 15 mm subtract 30 mm from overall H1: mm
width as value for internal width) L4: mm

Wo: mm H3: mm For higher number of outlets, please contact

technical support

Wi: mm

112
 ACO slot channel
ACO customized slot channel 

Step 4 - Gully construction

Welded gully Telescopic gully

ød2

ød2 horizontal ød2

horizontal
welded horizontal
øD øD

telescopic
telescopic

øD
vertical
vertical
vertical
øD
øD
øD

ACO channel
Outlet orientation and dimensions Location flange


(For telescopic gully only)

Vertical outlet Horizontal outlet

(ød2 / øD) (ød2 / øD)

142 / 75 (1.4 l/s) 142 / 75 (1.4 l/s)

142 / 110 (1.6 l/s) 142 / 110 (1.6 l/s) Bonding flange
(For telescopic gully only)



157 / 75 (2.7 l/s) 157 / 75 (2.6 l/s)

157 / 110 (3.5 l/s) 157 / 110 (2.8 l/s)

218 / 110 (5.0 l/s) 218 / 110 (4.4 l/s)

Mechanical clamping flange

218 / 160 (5.0 l/s) (For telescopic gully only)

Without gully (outlet pipe only) Outlet diameter (ød1) Outlet length (F)

75 mm
36 mm
(valid for gully top 200 x 200 mm)

110 mm
58 mm
(valid for gully top 200 x 200 mm)

125 mm
150 mm
(valid for gully top 200 x 200 mm)
F

142 mm
Custom: mm
(valid for gully top 250 x 250 mm)

ød1 200 mm
(valid for gully top 300 x 300 mm)

113
 ACO slot channel
ACO customized slot channel

Step 5 - Accessories

Foul air trap included Silt basket included

Yes Yes

No No

Raising piece included

Yes With Location flange With Bonding flange With Mechanical clamping flange

No
ACO channel

ACO EasyFix ACO Protective covers

levelling feet height (H) included

80 mm (standard) Yes

110 mm No

170 mm
H

200 mm

Step 6 - Delivery requirements

Lt
Maximum transport length
(Lt)

6000 mm (standard)

3000 mm

2000 mm

114
 ACO slot channel
ACO customized slot channel

Step 7 - Gratings

ACO hygienic ladder ACO hygienic cast ACO mesh grating

grating grating

Slip Slip
Plain Slip resistant Plain
resistant resistant

Load class Load class Load class

R 50 M 125 L 15
(valid up to Wo = 300 mm) (valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

M 125 R 50
(valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

N 250

ACO channel
(valid up to Wo = 300 mm)

ACO hygienic slot ACO perforated ACO multi-slot 5

cover grating grating

Slip resistant Plain Slip resistant

Load class Load class Load class

R 50 L 15 L 15
(valid up to Wo = 300 mm) (valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

M 125 R 50
(valid up to Wo = 300 mm) (valid up to Wo = 300 mm)

ACO heelsafe grating Without gratings

Height of gratings (E)

20 mm
E

25 mm

Plain 30 mm

Load class 40 mm

L 15
(valid up to Wo = 300 mm)

115
  ACO modular channel
Introduction

Introduction

ACO modular channel portfolio

The ACO modular channel range includes Channel’s length, depth and outlet position
channels for all common applications and are just a few of the parameters which can
all common floor types (concrete, tiles, be varied and, regardless of the variations
resin or vinyl). Selecting a channel from specified, there is no impact on delivery
the range is easy. The unique variability lead times.
of the whole portfolio makes it easy to
choose the right channel according to
a specific customer’s needs.

ACO modular channel ordering

The dimensions of the ACO modular

channel can be easily specified in respect
ACO channel

of project requirements.


ACO modular channel customization

In addition, all ACO modular channels can To request customised ACO modular
be designed to a special length. channel, please contact our Sales/
Technical department.



ACO modular sloped channel connection

Sloped channels are provided with rubber

seal at the deep end of the channel only.

If your design plan includes channels

connection at shallow ends, make sure
that appropriate amount of rubber seals is
included in your order.

116
 ACO modular channel
Introduction

ACO modular channel system overview

ACO channel
ACO modular box channel 125 ACO modular box channel 200 ACO modular slot channel 20

ACO gully
with accessories

117
  ACO modular channel
Introduction

ACO modular box channel system overview

5 7
4
8
2 9

3
6
ACO channel

7


8
2

9
1



118
 ACO modular channel
Introduction 

ACO modular slot channel system overview

4 7

8
2
9

ACO channel
1


5 3
6

8 2



1

1 Outlet unit 6 Gully

2 Level invert and sloping invert channel 7 Silt basket

3 Corner unit 8 Foul air trap

4 Branch unit 9 Foul air trap support

5 Grating

119
 ACO modular channel
ACO modular box channel 125 - standard articles
50
20

ACO modular box channel 125 - standard articles

H
1.5

15
Product information 65
105

Modular concept allows specification § Fully compliant to EN 1253

of standard channel units to surround § Fully tested and classified to EN 1433 153
125
machinery and fit within existing tiling § Available in 1.4301 (304) or 1.5
patterns. 1.4404 (316L) grades of stainless steel

21
H + 13

H
97
§ Fully pickled and passivated
Vee-bottomed (V) profiled channel for § Easy and secure telescopic connection
enhanced flow efficiency at low flow with gully
rates and for improved self cleaning § Cut on demand items available to
performance. minimize works on site 230

§ Wide range of gratings for load class up 200

1.5
to C 250 (EN 1433)

31
H + 21.5

H
172

Level invert channel

ACO channel

L
H

Dimensions Item number

L [mm] H [mm] 1.4301 1.4404
50 105119 407211
65 105120 407212
80 105121 407213
500
95 105122 407214
110 105123 407215
125 105124 407216
50 105127 407217
65 105128 407218
80 105129 407219
1000
95 105130 407220
110 105131 407221
125 105132 407222
50 105135 407223
65 105136 407224
80 105137 407225
2000
95 105138 407226
110 105139 407227
125 105140 407228
50 105143 407229
65 105144 407230
80 105145 407231
3000
95 105146 407232
110 105147 407233
125 105148 407234
Note: Items are equipped with seal and connecting material on one side.

Gratings for ACO modular box channel 125  Page 126

120
 ACO modular channel
ACO modular box channel 125 - standard articles

Sloping invert channel

H1
H2
Dimensions Item number
L [mm] H1 [mm] H2 [mm] 1.4301 1.4404
50 65 105151 407235
500
65 80 105152 407236
50 65 105155 407237
65 80 105156 407238
1000
80 95 105157 407239
95 110 105158 407240
50 65 105161 407241

ACO channel
65 80 105162 407242
2000 80 95 105163 407243
95 110 105164 407244
110 125 105165 407245
50 65 105168 407246
65 80 105169 407247
3000 80 95 105170 407248
95 110 105171 407249
110 125 105172 407250
50 80 408821 408824
6000 65 95 408822 408825
95 125 408823 408826
Note: Items are equipped with seal and connecting material on deeper side only. See page 116 for more details.

Gratings for ACO modular box channel 125  Page 126

121
 ACO modular channel
ACO modular box channel 125 - standard articles

Corner unit

L
125

L
Dimensions Item number
L [mm] H [mm] 1.4301 1.4404
50 409812 409818
65 409813 409819
80 409814 409820
515
95 409815 409821
ACO channel

110 409816 409822

125 409817 409823
Note: Items are equipped with seal and connecting material on one side.

Branch unit
L
H

125
L2
H

Dimensions Item number

L1 [mm] L2 [mm] H [mm] 1.4301 1.4404
50 409824 409830
65 409825 409831
80 409826 409832
500 515
95 409827 409833
110 409828 409834
125 409829 409835
Note: Items are equipped with seal and connecting material on one side.

Gratings for ACO modular box channel 125  Page 124

122
 ACO modular channel
ACO modular box channel 125 - standard articles

End outlet

H
ØD

Dimensions Gully Outlet diameter Item number

L [mm] H [mm] øD [mm] 1.4301 1.4404
50 105175 407251
65 105176 407252
80 105177 407253
500
95 105178 407254
110 105179 407255
125 105180 407256
ACO gully EG150 110
50 105183 407257
65 105184 407258

ACO channel
80 105185 407259
1000
95 105186 407260
110 105187 407261
125 105188 407262
50 415946 415991
65 415947 415992
80 415948 415993
500
95 415949 415994
110 415950 415995
125 415951 415996
ACO hygienic gully 142 125
50 415952 415997
65 415953 415998
80 415954 415999
1000
95 415955 416000
110 415956 416001
125 415957 416002
50 409732 409733
65 409736 409737
80 409740 409741
500
95 409744 409745
110 409724 409725
125 409728 409729
ACO hygienic gully 157 142
50 409708 409709
65 409712 409713
80 409716 409717
1000
95 409720 409721
110 409700 409701
125 409704 409705
Note: Items are equipped with seal and connecting material on one side.

ACO hygienic gully 142  Page 24 ACO gully EG150  Page 59 / Accessories  Page 75
ACO hygienic gully 157  Page 39 Gratings for ACO modular box channel 125  Page 126 123
ACO hygienic gully 218  Page 51 Accessories for ACO modular box channel 125  Page 130
 ACO modular channel
ACO modular box channel 125 - standard articles

Centre outlet

H
ØD

Dimensions Gully Outlet diameter Item number

L [mm] H [mm] øD [mm] 1.4301 1.4404
50 105191 407263
65 105192 407264
80 105193 407265
500
95 105194 407266
110 105195 407267
125 105196 407268
ACO gully EG150 110
50 105199 407269
65 105200 407270
ACO channel

80 105201 407271
1000
95 105202 407272
110 105203 407273
125 105204 407274
50 415958 416003
65 415959 416004
80 415960 416005
500
95 415961 416006
110 415962 416007
125 415963 416008
ACO hygienic gully 142 125
50 415964 416009
65 415965 416010
80 415966 416011
1000
95 415967 416012
110 415968 416013
125 415969 416014
50 409734 409735
65 409738 409739
80 409742 409743
500
95 409746 409747
110 409726 409727
125 409730 409731
ACO hygienic gully 157 142
50 409710 409711
65 409714 409715
80 409718 409719
1000
95 409722 409723
110 409702 409703
125 409706 409707
Note: Items are equipped with seal and connecting material on one side.

ACO gully EG150  Page 59 / Accessories  Page 75 Gratings for ACO modular box channel 125  Page 126
124 ACO hygienic gully 142  Page 24 Accessories for ACO modular box channel 125  Page 130
ACO hygienic gully 157  Page 39
 ACO modular channel
ACO modular box channel 125 - standard articles 
End plate

H
Dimensions Item number
H [mm] 1.4301 1.4404
50 105100 407196
65 105101 407197
80 105102 407198
95 105103 407199
110 105104 407200
125 105105 407201
Note: Items are equipped with seal and connecting material.

ACO channel
End plate with 50 mm outlet


H

Ø50

Dimensions Item number



H [mm] 1.4301 1.4404
65 409114 409119
80 409115 409120
95 409116 409121
110 409117 409122
125 409118 409123
Note: Items are equipped with seal and connecting material.

Seal rubber
H

Dimensions Item number

H [mm] NBR
50 413587
65 413588
80 413589
95 413590
110 413591
125 413592
Note: Items include seal and connecting material.

125
  ACO modular channel
Gratings for ACO modular box channel 125

Gratings for ACO modular box channel 125

Product information
§§ Fully tested and classified to EN 1433
§§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§§ Special length 375 mm for branches
and corner units
§§ Slip resistant gratings available for
added user safety
§§ Load classes A 15, B 125 and C 250

ACO mesh grating

L
ACO channel

Length Load class Slip resistant Material Item



L [mm] number
1.4301 414132
No
1.4404 414182
A 15
1.4301 414130
Yes
1.4404 414180
375
1.4301 414133
No
1.4404 414183
C 250
1.4301 414131
Yes



1.4404 414181
1.4301 21720
No
1.4404 21725
A 15
1.4301 21710
Yes
1.4404 21715
500
1.4301 21920
No
1.4404 21925
C 250
1.4301 21910
Yes
1.4404 21915
1.4301 21620
No
1.4404 21625
A 15
1.4301 21610
Yes
1.4404 21615
1000
1.4301 21820
No
1.4404 21825
C 250
1.4301 21810
Yes
1.4404 21815

126
 ACO modular channel
Gratings for ACO modular box channel 125 
ACO ladder grating

Length Load class Slip resistant Material Item

L [mm] number
1.4301 414134
375 C 250 Yes
1.4404 414184
1.4301 21740
500 C 250 Yes
1.4404 21745
1.4301 21741
1000 C 250 Yes
1.4404 21746

ACO heelsafe grating

ACO channel
L


Length Load class Slip resistant Material Item
L [mm] number
1.4301 414135
375 B 125 No
1.4404 414185



1.4301 96819
500 B 125 No
1.4404 401238
1.4301 96818
1000 B 125 No
1.4404 401237

ACO perforated grating

L

Length Load class Slip resistant Material Item

L [mm] number
1.4301 414136
A 15 No
1.4404 414186
375
1.4301 414137
B 125 No
1.4404 414187
1.4301 21760
A 15 No
1.4404 21765
500
1.4301 21960
B 125 No
1.4404 21965
1.4301 21660
A 15 No
1.4404 21665
1000
1.4301 21860
B 125 No
1.4404 21865

127
  ACO modular channel
Gratings for ACO modular box channel 125

ACO quadrato grating

L

Length Load class Slip resistant With lock Material Item

L [mm] number
1.4301 414138
375 A 15 No No
1.4404 414188
1.4301 105530
No
1.4404 413999
500 A 15 No
1.4301 105528
Yes
1.4404 407925
1.4301 105529
No
1.4404 413998
1000 A 15 No
1.4301 105527
Yes
1.4404 407924
ACO channel


ACO plastic grating

L



Length Load class Slip resistant Material Item

L [mm] number
500 A 15 No - 21790
1000 A 15 No - 21690

ACO multi-slot 5 grating

L

Length Load class Slip resistant Material Item

L [mm] number
1.4301 414139
375 A 15 Yes
1.4404 414189
1.4301 409290
A 15 Yes
1.4404 409291
500
1.4301 409294
B 125 Yes
1.4404 409295
1.4301 409286
A 15 Yes
1.4404 409287
1 000
1.4301 409236
B 125 Yes
1.4404 409237

128
 ACO modular channel
Gratings for ACO modular box channel 125 
ACO multi-slot 8 grating
L

Length Load class Slip resistant Material Item

L [mm] number
1.4301 415739
A 15 Yes
1.4404 415740
1.4301 415747
500 B 125 Yes
1.4404 415748
1.4301 415753
C 250 Yes
1.4404 415754
1.4301 415735
A 15 Yes
1.4404 415736
1.4301 415743
1 000 B 125 Yes
1.4404 415744
1.4301 415751

ACO channel
C 250 Yes
1.4404 415752


ACO hygienic slot cover
L



Length Load class Slip resistant Material Item
L [mm] number
1.4301 445800
B 125 Yes
1.4404 445801
375
1.4301 445802
C 250 Yes
1.4404 445803
1.4301 445792
B 125 Yes
1.4404 445793
500
1.4301 445794
C 250 Yes
1.4404 445795
1.4301 445796
B 125 Yes
1.4404 445797
1 000
1.4301 445798
C 250 Yes
1.4404 445799

129
  ACO modular channel
Accessories for ACO modular box channel 125

Accessories for ACO modular box channel 125

Item
Description Used with Material
number

Ø105 1.4301 97235

Ø105 Sieve ■ ACO modular box channel 125
Ø108
■ Stainless steel with outlet 110 mm
Ø108
1.4404 97285
91
91

Ø108 1.4301 97217

Foul air trap
Ø108 ■ ACO modular box channel 125
■ Stainless steel
with outlet 110 mm
85

■ Water seal 50 mm
1.4404 97267
85

Ø102+2

Ø102+2
86±2 86±2

1.4301 414339
Ø142 Ø136
Silt basket
■ ACO modular box channel 125
Ø88 ■ Stainless steel
with outlet 125 and 142 mm
45

50

■ 0.5 litre capacity

ACO channel

Ø88
1.4404 414340


Ø142
30



130
 1.5

15
ACO modular
65
105
channel
ACO modular box channel 200 - standard articles
153
125
1.5

21
ACO modular box channel 200 - standard articles

H + 13

H
97

Product information
Modular concept allows specification § Fully compliant to EN 1253
230
of standard channel units to surround § Fully tested and classified to EN 1433 200

machinery and fit within existing tiling § Available in 1.4301 (304) or 1.4404 1.5

31
patterns. (316L) grades of stainless steel

H + 21.5

H
172
§ Fully pickled and passivated
§ Easy and secure telescopic connection
with gully
§ Cut on demand items available to
minimize works on site
§ Wide range of gratings for load class
up to C 250 (EN 1433)

Level invert channel

ACO channel
H

200

Dimensions Item number

L [mm] H [mm] 1.4301 1.4404
60 409072 409050
70 409047 409051
500
80 409048 409052
100 409049 409053
60 401859 401860
70 409054 409057
1000
80 409055 409058
100 409056 409059
60 401875 401876
70 409060 409063
2000
80 409061 409064
100 409062 409065
60 401895 401896
70 409066 409069
3000
80 409067 409070
100 409068 409071
Note: Items are equipped with seal and connecting material on one side.

Gratings for ACO modular box channel 200  Page 139

131
 ACO modular channel
ACO modular box channel 200 - standard articles

Sloping invert channel

H1
H

200
Dimensions Item number
L [mm] H1 [mm] H2 [mm] 1.4301 1.4404
500 55 60 401855 401856
60 70 401871 401872
70 80 402464 402465
1000 80 90 402466 402467
90 100 402468 402469
100 110 402470 402471
60 70 401887 401888
70 80 402472 402473
ACO channel

80 90 402474 402475
2000
90 100 402476 402477
100 110 402478 402479
110 120 402480 402481
60 80 402482 402483
80 100 402484 402485
3000
100 120 402486 402487
120 140 402488 402489
60 100 408827 408829
6000
100 140 408828 408830
Note: Items are equipped with seal and connecting material on deeper side only. See page 116 for more details.

Gratings for ACO modular box channel 200  Page 139

132
 ACO modular channel
ACO modular box channel 200 - standard articles

Corner unit

L
Dimensions Item number
L [mm] H [mm] 1.4301 1.4404
60 401921 401922
515 80 402490 402491
100 402492 402493
Note: Items are equipped with seal and connecting material on one side.

ACO channel
Branch unit

L
H

L2
200
L2
H

Dimensions Item number

L [mm] H1 [mm] H2 [mm] 1.4301 1.4404
60 401933 401934
500 515 80 402494 402495
100 402496 402497
Note: Items are equipped with seal and connecting material on one side.

Gratings for ACO modular box channel 200  Page 139

133
 ACO modular channel
ACO modular box channel 200 - standard articles

End outlet

200
ØD

Dimensions Gully Outlet diameter Item number

L [mm] H [mm] øD [mm] 1.4301 1.4404
60 414275 414283
70 414276 414284
80 414277 414285
90 414278 414286
500
100 414279 414287
110 414280 414288
120 414281 414289
140 414282 414290
ACO channel

ACO gully EG150 110

60 414291 414299
70 414292 414300
80 414293 414301
90 414294 414302
1000
100 414295 414303
110 414296 414304
120 414297 414305
140 414298 414306
60 409900 409908
70 409901 409909
80 409902 409910
90 409903 409911
500
100 409904 409912
110 409905 409913
120 409906 409914
140 409907 409915
ACO hygienic gully 157 142
60 409932 409940
70 409933 409941
80 409934 409942
90 409935 409943
1000
100 409936 409944
110 409937 409945
120 409938 409946
140 409939 409947
Note: Note: Items are equipped with seal and connecting material on one side.

ACO hygienic gully 157  Page 39 Gratings for ACO modular box channel 200  Page 139
134 ACO gully EG150  Page 59 / Accessories  Page 75 Accessories for ACO modular box channel 125  Page 142
 ACO modular channel
ACO modular box channel 200 - standard articles

End outlet

200
ØD

□300

Dimensions Gully Outlet diameter Item number

L [mm] H [mm] øD [mm] 1.4301 1.4404
60 414259 414267
70 414260 414268
80 414261 414269
90 414262 414270
785 ACO hygienic gully 218 200
100 414263 414271
110 414264 414272
120 414265 414273

ACO channel
140 414266 414274
Note: Items are equipped with seal and connecting material on one side.

ACO hygienic gully 218  Page 51 Gratings for ACO modular box channel 200  Page 139
ACO gully EG150  Page 59 / Accessories  Page 75 Accessories for ACO modular box channel 125  Page 142 135
 ACO modular channel
ACO modular box channel 200 - standard articles

Centre outlet

200
ØD

Dimensions Gully Outlet diameter Item number

L [mm] H [mm] øD [mm] 1.4301 1.4404
60 414307 414315
70 414308 414316
80 414309 414317
90 414310 414318
500
100 414311 414319
110 414312 414320
120 414313 414321
140 414314 414322
ACO gully EG150 110
ACO channel

60 414323 414331
70 414324 414332
80 414325 414333
90 414326 414334
1000
100 414327 414335
110 414328 414336
120 414329 414337
140 414330 414338
60 409916 409924
70 409917 409925
80 409918 409926
90 409919 409927
500
100 409920 409928
110 409921 409929
120 409922 409930
140 409923 409931
ACO hygienic gully 157 142
60 409948 409956
70 409949 409957
80 409950 409958
90 409951 409959
1000
100 409952 409960
110 409953 409961
120 409954 409962
140 409955 409963
Note: Items are equipped with seal and connecting material on one side.

ACO gully EG150  Page 59 / Accessories  Page 75 Gratings for ACO modular box channel 200  Page 139
136 ACO hygienic gully 157  Page 39 Accessories for ACO modular box channel 200  Page 142
 ACO modular channel
ACO modular box channel 200 - standard articles

Centre outlet

200
ØD

□300

Dimensions Gully Outlet diameter Item number

L [mm] H [mm] øD [mm] 1.4301 1.4404
60 414243 414251
70 414244 414252
80 414245 414253
90 414246 414254
1270 ACO hygienic gully 218 200
100 414247 414255
110 414248 414256
120 414249 414257
140 414250 414258

ACO channel
Note: Items are equipped with seal and connecting material on one side.

End plate
H

Dimensions Item number

[mm] 1.4301 1.4404
55 402683 402684
60 402028 402029
70 402030 402031
80 402514 402515
90 402032 402033
100 402516 402517
110 402518 402519
120 402036 402037
140 402520 402521
Note: Items are equipped with seal and connecting material.

ACO hygienic gully 218  Page 51 Gratings for ACO modular box channel 200  Page 139
Accessories for ACO modular box channel 200  Page 142 137
  ACO modular channel
ACO modular box channel 200 - standard articles

End plate with 50 mm outlet

Ø50
Dimensions Item number
H [mm] 1.4301 1.4404
55 402001 402002
60 402003 402004
70 402005 402006
80 402034 402035
90 402007 402008
100 402024 402025
110 402020 402021
120 402022 402023
140 401999 402000
Note: Items are equipped with seal and connecting material.
ACO channel


Seal rubber
H



Dimensions Item number

H [mm] NBR
60 413593
70 413594
80 413595
90 413596
100 413597
110 413598
120 413599
140 413600
Note: Items include seal and connecting material.

138
 ACO modular channel
Gratings for ACO modular box channel 200 
Gratings for ACO modular box channel 200

Product information
§§ Fully tested and classified to EN 1433
§§ Available in 1.4301 (304) or 1.4404
(316L) grades of stainless steel
§§ Special length 300 mm for branches
and corner units
§§ Slip resistant gratings available for
added user safety
§§ Load classes A 15, B 125 and C 250

ACO mesh grating

L

ACO channel

Length Load class Slip resistant Material Item
L [mm] number
1.4301 414141
No
1.4404 414191
300 A 15
1.4301 414140
Yes
1.4404 414190
1.4301 92207



No
1.4404 92257
500 A 15
1.4301 92200
Yes
1.4404 92250
1.4301 92208
No
1.4404 92258
1000 A 15
1.4301 92201
Yes
1.4404 92251

ACO ladder grating

L

Length Load class Slip resistant Material Item

L [mm] number
1.4301 414142
300 C 250 Yes
1.4404 414192
1.4301 92214
500 C 250 Yes
1.4404 92264
1.4301 92215
1000 C 250 Yes
1.4404 92265

139
  ACO modular channel
Gratings for ACO modular box channel 200

ACO perforated grating

Length Load class Slip resistant Material Item

L [mm] number
1.4301 414143
300 A 15 No
1.4404 414193
1.4301 402689
500 A 15 No
1.4404 405188
1.4301 402688
1000 A 15 No
1.4404 405187
ACO channel

ACO multi-slot 5 grating



L



Length Load class Slip resistant Material Item

L [mm] number
1.4301 414145
300 A 15 Yes
1.4404 414195
1.4301 409292
A 15 Yes
1.4404 409293
500
1.4301 409296
B 125 Yes
1.4404 409297
1.4301 409288
A 15 Yes
1.4404 409289
1000
1.4301 409240
B 125 Yes
1.4404 409241

140
 ACO modular channel
Gratings for ACO modular box channel 200 
ACO multi-slot 8 grating
L

Length Load class Slip resistant Material Item

L [mm] number
1.4301 415741
A 15 Yes
1.4404 415742
500
1.4301 415749
B 125 Yes
1.4404 415750
1.4301 415737
A 15 Yes
1.4404 415738
1000
1.4301 415745
B 125 Yes
1.4404 415746

ACO channel
ACO hygienic slot cover


L



Length Load class Slip resistant Material Item
L [mm] number
1.4301 445812
B 125 Yes
1.4404 445813
375
1.4301 445814
C 250 Yes
1.4404 445815
1.4301 445804
B 125 Yes
1.4404 445805
500
1.4301 445806
C 250 Yes
1.4404 445807
1.4301 445808
B 125 Yes
1.4404 445809
1 000
1.4301 445810
C 250 Yes
1.4404 445811

141
  ACO modular channel
Accessories for ACO modular box channel 200

Accessories for ACO modular box channel 200

Item
Description Used with Material
number

Ø105 1.4301 97235

Ø105 Sieve ■ ACO modular box channel 200
Ø108
■ Stainless steel with outlet 110 mm
Ø108
1.4404 97285
91
91

Ø108 1.4301 97217

Foul air trap
Ø108 ■ ACO modular box channel 200
■ Stainless steel
with outlet 110 mm
85

■ Water seal 50 mm
1.4404 97267
85

Ø102+2

Ø102+2
86±2 86±2

1.4301 408202
Ø217 Ø154 Ø142 Ø136
Silt basket
■ ACO modular box channel 200
Ø88 ■ Stainless steel
with outlet 142 mm
45

50
50

■ 0.6 litre capacity

ACO channel

Ø88
1.4404 408212


Ø217 Ø156 1.4301 408222

Ø217 Ø142 Ø154
Silt basket Ø142 Ø136
■ ACO modular box channel 200
26

■ Stainless steel
30

with outlet 200 mm

45

50
50

50

■ 1.4 litre capacity

1.4404 408232

Ø217 Ø156



Ø142
26

26

30

142
 ACO modular channel
ACO modular slot channel 20 - standard articles

ACO modular slot channel 20 - standard articles

Product information
Ideal for wash-down applications or as a § Fully compliant to EN 1253
50
water break between designed wet and § Fully tested and classified to EN 1433 20

dry areas. § Available in 1.4301 (304) or 1.4404

(316L) grades of stainless steel, Fully
Modular concept allows specification pickled and passivated

H
1.5

of standard channel units to surround § Wide range of gratings for load class up

15
machinery and fit within existing tiling to C 250 (EN 1433) 65
105
patterns.
153
Vee-bottomed (V) profiled channel for 125

enhanced flow efficiency at low flow 1.5

21
rates and for improved self cleaning

H + 13

H
97

performance.

Level invert channel

230

ACO channel
200

L 1.5

31
H + 21.5

H
172
H

Dimensions Item number

L [mm] H [mm] 1.4301 1.4404
70 92300 92350
500 90 92301 92351
120 92302 92352
70 92305 92355
1000 90 92306 92356
120 92307 92357
70 92310 92360
2000 90 92311 92361
120 92312 92362
70 92316 92366
3000 90 92317 92367
120 92318 92368
Note: Items are equipped with seal and connecting material on one side.

143
 ACO modular channel
ACO modular slot channel 20 - standard articles

Sloping invert channel

H1
H
Dimensions Item number
L [mm] H1 [mm] H2 [mm] 1.4301 1.4404
70 75 92303 92353
500
75 80 92304 92354
70 75 92308 92358
1000
75 80 92309 92359
70 80 92313 92363
2000 80 90 92314 92364
90 100 92315 92365
70 80 92319 92369
80 90 92320 92370
ACO channel

3000 90 100 92321 92371

100 110 92322 92372
110 120 92323 92373
70 90 409014 409015
6000
90 110 409016 409017
Note: Items are equipped with seal and connecting material on deeper side only. See page 116 for more details.

Corner unit
L
H

Dimensions Item number

L [mm] H [mm] 1.4301 1.4404
70 92338 92388
75 92339 92389
80 92340 92390
500 90 92341 92391
100 92342 92392
110 92343 92393
120 92344 92394
Note: Items are equipped with seal and connecting material on one side.

144
 ACO modular channel
ACO modular slot channel 20 - standard articles

Branch unit
L

L
Dimensions Item number
L [mm] H [mm] 1.4301 1.4404
70 92345 92395
75 92346 92396
80 92347 92397
500 90 92348 92398
100 92349 92399

ACO channel
110 92400 92450
120 92401 92451
Note: Items are equipped with seal and connecting material on one side.

End outlet

L
H

ØD

Dimensions Gully Gully top Outlet diameter Item number

L [mm] H [mm] [mm] øD [mm] 1.4301 1.4404
70 414341 414348
75 414342 414349
80 414343 414350
90 ACO gully EG150 200 x 200 110 414344 414351
100 414345 414352
110 414346 414353
120 414347 414354
70 415925 415970
75 415926 415971
80 415927 415972
ACO hygienic gully
500 90 200 x 200 125 415928 415973
142
100 415929 415974
110 415930 415975
120 415931 415976
70 414201 414208
75 414202 414209
80 414203 414210
ACO hygienic gully
90 250 x 250 142 414204 414211
157
100 414205 414212
110 414206 414213
120 414207 414214
Note: Items are equipped with seal and connecting material on one side.

ACO gully EG150  Page 59 / Accessories  Page 75 Gratings for ACO modular slot channel 20  Page 61
ACO hygienic gully 142  Page 24 Accessories for ACO modular slot channel 20  Page 148 145
ACO hygienic gully 157  Page 39
 ACO modular channel
ACO modular slot channel 20 - standard articles

Centre outlet
L

H
ØD

Dimensions Gully Gully top Outlet diameter Item number

L [mm] H [mm] [mm] øD [mm] 1.4301 1.4404
70 414355 414362
75 414356 414363
80 414357 414364
500 90 414358 414365
100 414359 414366
110 414360 414367
120 414361 414368
ACO gully EG150 200 x 200 110
70 414369 414376
75 414370 414377
ACO channel

80 414371 414378
1000 90 414372 414379
100 414373 414380
110 414374 414381
120 414375 414382
70 415932 415977
75 415933 415978
80 415934 415979
500 90 415935 415980
100 415936 415981
110 415937 415982
120 ACO hygienic gully 415938 415983
200 x 200 125
70 142 415939 415984
75 415940 415985
80 415941 415986
1000 90 415942 415987
100 415943 415988
110 415944 415989
120 415945 415990
70 414215 414222
75 414216 414223
80 414217 414224
500 90 414218 414225
100 414219 414226
110 414220 414227
120 ACO hygienic gully 414221 414228
250 x 250 142
70 157 414229 414236
75 414230 414237
80 414231 414238
1000 90 414232 414239
100 414233 414240
110 414234 414241
120 414235 414242
Note: Items are equipped with seal and connecting material on one side.

ACO gully EG150  Page 59 / Accessories  Page 75 Gratings for ACO modular slot channel 20  Page 61
146 ACO hygienic gully 142  Page 24 Accessories for ACO modular slot channel 20  Page 148
ACO hygienic gully 157  Page 39
 ACO modular channel
ACO modular slot channel 20 - standard articles 
End plate

H
Dimensions Item number
H [mm] 1.4301 1.4404
70 92324 92374
75 92325 92375
80 92326 92376
90 92327 92377
100 92328 92378
110 92329 92379
120 92330 92380
Note: Items are equipped with seal and connecting material.

ACO channel
End plate with 50 mm outlet


H

Ø50
Dimensions Item number



H [mm] 1.4301 1.4404
70 92331 92381
75 92332 92382
80 92333 92383
90 92334 92384
100 92335 92385
110 92336 92386
120 92337 92387
Note: Items are equipped with seal and connecting material.

Seal rubber
H

Dimensions Item number

H [mm] NBR
70 413601
75 413602
80 413603
90 413604
100 413605
110 413606
120 413607
Note: Items include seal and connecting material.

147
  ACO modular channel
Accessories for ACO modular slot channel 20

Accessories for ACO modular slot channel 20

Item
Description Used with Material
number

Ø105 1.4301 97235

Ø105 Sieve ■ ACO modular slot channel 20
Ø108
■ Stainless steel with outlet 110 mm
Ø108
1.4404 97285
91
91

Ø108 1.4301 97217

Foul air trap
Ø108 ■ ACO modular slot channel 20
■ Stainless steel
with outlet 110 mm
85

■ Water seal 50 mm
1.4404 97267
85

Ø102+2

Ø102+2
86±2 86±2

1.4301 414339
Ø142 Ø136
Silt basket
■ ACO modular slot channel 20
Ø88 ■ Stainless steel
with outlet 125 mm
45

50

■ 0.5 litre capacity

ACO channel

Ø88
1.4404 414340


1.4301 408202
Ø217 Ø142 Ø154 Ø142 Ø136
Silt basket
■ ACO modular slot channel 20
■ Stainless steel
30

with outlet 142 mm

45

50
50

■ 0.6 litre capacity

1.4404 408212

Ø217 Ø156



Ø142
26

30

148
 ACO modular channel
ACO modular channel - semi-standard

ACO modular channel - semi-standard

Product information

Semi-standard items offer/provide easy

How it works:
and fast way to get a slot or box channel
The semi-standard item is produced from
of a special length to complete a linear
a standard stock item (level invert and
drainage project with standard stock items.
sloping invert channels only) which is
Simply specify the length you need.
shortened according to customer’s need.
The shortened item is then equipped with
How to specify semi-standard items: flange and sealing; to fit the following
Specify the part number from which the channel in the drainage project. Grating of
semi-standard item will be produced. the same length is also produced.

ACO channel
Required length of the
channel

Standard level invert or sloping invert

channel

§ Specify the required length of the item

(length always starts at lower height
of channel if channel with invert slope
used).

Standard length of the channel

Required length of the channel

149
  ACO design channel
ACO design channel

ACO design channel

Product information

Even atypical solutions can be easily

realised using stainless steel. The broad
spectrum of finishes and shapes gives
complete design freedom.

Customers’ individual channel designs will

be managed by our expert team with tailor-
made services for specific projects with
full proposal information, CAD layout draw-
ings and assembly instructions.
Contact our Sales/Technical department
team and we will help you with your project.
ACO channel
 


150
 Flow rates
Flow rates and Construction heights 
Flow rates and Construction heights

ACO channel, ACO hygienic gully 142

H
A

B
ØD
Ø142

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm
øD A min. = 85 A max. = 115
B min. = 194 B max. = 224
75 1.4 1.7
Vertical
110 1.6 1.9

ACO channel



H
A

B
ØD

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm
øD A min. = 75 A max. = 115
B min. = 185 B max. = 245
75 1.4 1.7
Horizontal
110 1.6 1.9

Notes:
A min. and B min. values can be reduced by 15 mm if earth screw is removed and channel outlet spigot shortened. Please be aware that
channel outlet pipe shortening affects the A max. and B max. values.

Flow rates measured according to EN 1253. Flow rate performance without silt basket (flow rates with empty silt basket are
approximately 15% lower than the values stated)

151
  Flow rates
Flow rates and Construction heights

ACO channel, ACO hygienic gully 157

H
A

B
ØD
Ø157

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm
øD A min. = 85 A max. = 115
B min. = 232 B max. = 262
75 2.9 3.1
Vertical
110 3.9 4.2
ACO channel


H



B
ØD

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm
øD A min. = 75 A max. = 115
B min. = 242 B max. = 285
75 2.8 3.1
Horizontal
110 3.2 3.9

Notes:
A min. and B min. values can be reduced by 15 mm if earth screw is removed and channel outlet spigot shortened. Please be aware that
channel outlet pipe shortening affects the A max. and B max. values.

Flow rates measured according to EN 1253. Flow rate performance without silt basket (flow rates with empty silt basket are
approximately 15% lower than the values stated)

152
 Flow rates
Flow rates and Construction heights 

ACO channel, ACO hygienic gully 218

H
A

B
ØD
Ø218

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm H = 80 mm H = 100 mm H = 150 mm H = 200 mm
A min. A max. A min. A max. A min. A max. A min. A max. A min. A max.
= 75 = 115 = 95 = 135 = 115 = 155 = 165 = 205 = 215 = 255
øD [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
B min. B max. B min. B max. B min. B max. B min. B max. B min. B max.

ACO channel
= 245 = 285 = 265 = 305 = 285 = 325 = 335 = 375 = 385 = 425
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]


110 5.4 5.6 5.6 5.8 5.7 6.0 5.9 6.4 6.4 6.4
Vertical
160 5.4 5.6 5.6 5.8 5.7 6.0 5.9 6.4 6.4 6.4
H
A



B
ØD

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm H = 80 mm H = 100 mm H = 150 mm H = 200 mm
A min. A max. A min. A max. A min. A max. A min. A max. A min. A max.
= 85 = 115 = 105 = 135 = 125 = 155 = 175 = 205 = 225 = 255
øD [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
B min. B max. B min. B max. B min. B max. B min. B max. B min. B max.
= 235 = 265 = 255 = 285 = 275 = 305 = 325 = 355 = 375 = 405
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
110 Horizontal 4.5 4.7 4.8 4.9 4.9 5.1 5.0 5.6 5.6 6.4

Notes:
A min. and B min. values can be reduced by 15 mm if earth screw is removed and channel outlet spigot shortened. Please be aware that
channel outlet pipe shortening affects the A max. and B max. values.

Flow rates measured according to EN 1253. Flow rate performance without silt basket (flow rates with empty silt basket are
approximately 15% lower than the values stated)

153
  Flow rates
Flow rates and Construction heights

ACO channel, ACO gully EG150

H
A

B
ØD

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm
øD A min. = 60 A max. = 85
B min. = 165 B max. = 190
75 1.3 1.5
Vertical
110 1.3 1.5
ACO channel
 


H
A

B
ØD

Outlet Outlet
Flow rate [l/s]
diameter position
H = 60 mm
øD A min. = 60 A max. = 85
B min. = 165 B max. = 190
75 Horizontal 1.3 1.5

Notes:
A min. and B min. values can be reduced by 15 mm if earth screw is removed and channel outlet spigot shortened. Please be aware that
channel outlet pipe shortening affects the A max. and B max. values.

Flow rates measured according to EN 1253. Flow rate performance without silt basket (flow rates with empty silt basket are
approximately 15% lower than the values stated)

154
 Flow rates
Notes 

Notes

ACO channel




155
  Flow rates
Notes
ACO channel
 


156
 Flow rates
Notes

ACO pipe Page

Introduction 158
Introduction
System overview 159

Straight pipes 160

Straight pipes
Double socketed pipes 164

Bends 167

Single branches 171

Double branches 172

Fittings Single branch reductions 174

        
Double branch reductions 175

Swept single branch 176

Accessories (Couplings, Connectors, Clamps, Seals and Cutters) 177

Flow rates Full bore flow rate tables for varying gradients 193

Operating pressures Operating pressures 195

157
  ACO pipe
Introduction

Introduction

ACO pipe is the ideal system for gray and ACO pipe and fittings are available
black water, rainwater and industrial waste in 40 mm, 50 mm, 75 mm, 110 mm,
water drainage applications. When used 125 mm, 160 mm, 200 mm, 250 mm
with ACO gully and ACO channel systems, and 315 mm external diameters with
ACO pipe provides a unique, complex the standard lengths from 0.15 meter
building drainage solution. up to 6 meter for optimum practicality
and ease of assembly.

ACO pipe push-fit connection

Reliable for vacuum and gravity piping

systems.

ACO pipe double lip seal delivers the

ultimate system reliability. The unique and
sophisticated design of lips and cavities
provide tight connections.

Push-fit advantages
Introduction

§§ Easy to assemble
§§ Time saving
§§ Cost saving


§§ Tight connection



158
 ACO pipe
System overview

System overview

Straight pipes

Fittings

Introduction
Bends

Branches

Accessories

159
 Straight pipes
Straight pipes

Straight pipes

Product information
§ Pipes are available in 40 mm, 50 mm, § Push-fit system for quick assembly
75 mm, 110 mm, 125 mm, 160 mm, § Superior seal security – components
200 mm, 250 mm and 315 mm comprise a unique double lip sealing
external diameters system, ideal for extraneous conditions
§ Lengths from 0.15 meter up to 6 meter § Fully comply to EN 1124
§ Available in 1.4301 (AISI 304) and § EPDM and Viton ® seals available
1.4404 (AISI 316L) grades stainless § Fully pickled and passivated
steel

ACO pipe - straight pipe ACO pipe - double socketed pipe

ØD2 ØD2
ØD1 ØD1
ØD2 ØD2
ØD1 ØD1
L

L
L

L ØD
T
ØD T
T
T

ØD3
ØD
ØD3
ACO pipe

ØD

Dimensions of socket and spigot

Socket Wall thickness
length
øD [mm] øD1 [mm] øD2 [mm] øD3 [mm]
L [mm] T [mm]
40 41 51.5 38 40 1.0
50 51 62.0 47 42 1.0
75 76 87.5 72 50 1.0
110 111 125.5 107 57 1.0
125 126 141.0 122 63 1.0
160 161 178.0 156 70 1.25
200 201 219.0 195 80 1.5
250 251 268.6 245 90 1.5
315 316.2 334.2 309 100 2.0

ACO pipe - straight pipe 40 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
40 150 0.2 417304 417320
40 250 0.3 417306 417322
417308 417324
L

40 500 0.6
40 750 0.8 417310 417278
40 1000 1.1 417312 417380
40 1500 1.6 417314 417282
EPDM
40 2000 2.1 417316 417284
40 2500 2.8 417260 417262
40 3000 3.1 417318 417334
40 4000 4.1 417264 417270 ØD
40 5000 5.1 417266 417272
40 6000 6.1 417268 417274

160
 Straight pipes
Straight pipes 

ACO pipe - straight pipe 5

 0 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
50 150 0.2 98500 98550
50 250 0.4 98502 98552
50 500 0.7 98504 98554
50 750 1.0 98506 98556
50 1000 1.3 98508 98558
50 1500 1.9 98510 98560
EPDM
50 2000 2.6 98512 98562
50 2500 3.2 419274 419282
50 3000 3.8 98514 98564
419458 419482

L
50 4000 5.0
50 5000 6.3 419466 419490
50 6000 7.5 419474 419498
50 150 0.2 98501 98551
50 250 0.4 98503 98553
50 500 0.7 98505 98555
50 750 1.0 98507 98557
50 1000 1.3 98509 98559 ØD
50 1500 1.9 98511 98561
Viton®
50 2000 2.6 98513 98563
50 2500 3.2 419275 419283
50 3000 3.8 98515 98565
50 4000 5.0 419459 419483
50 5000 6.3 419467 419491
50 6000 7.5 419475 419499

ACO pipe

ACO pipe - straight pipe 7
 5 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
75 150 0.4 98516 98566
75 250 0.6 98518 98568
75 500 1.0 98520 98570
75 750 1.5 98522 98572
75 1000 2.0 98524 98574 
75 1500 2.9 98526 98576 
EPDM
75 2000 3.6 98528 98578
75 2500 4.8 419276 419284
75 3000 5.7 98530 98580
75 4000 7.6 419460 419484
75 5000 9.4 419468 419492
L

75 6000 11.3 419476 419500

75 150 0.4 98517 98567
75 250 0.6 98519 98569
75 500 1.0 98521 98571
75 750 1.5 98523 98573
75 1000 2.0 98525 98575
75 1500 2.9 98527 98577
Viton®
75 2000 3.6 98529 98579 ØD
75 2500 4.8 419277 419285
75 3000 5.7 98531 98581
75 4000 7.6 419461 419485
75 5000 9.4 419469 419493
75 6000 11.3 419477 419501

161
  Straight pipes
Straight pipes

ACO pipe - straight pipe 1

 10 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
110 150 0.6 98532 98582
110 250 0.9 98534 98584
110 500 1.5 98536 98586
110 750 2.2 98538 98588
110 1000 2.9 98540 98590
110 1500 4.3 98542 98592
EPDM
110 2000 5.7 98544 98594
110 2500 7.1 419278 419286
110 3000 8.4 98546 98596
110 4000 11.1 419462 419486

L
110 5000 13.9 419470 419494
110 6000 16.7 419478 419502
110 150 0.6 98533 98583
110 250 0.9 98535 98585
110 500 1.5 98537 98587
110 750 2.2 98539 98589
ØD
110 1000 2.9 98541 98591
110 1500 4.3 98543 98593
Viton®
110 2000 5.7 98545 98595
110 2500 7.1 419279 419287
110 3000 8.4 98547 98597
110 4000 11.1 419463 419487
110 5000 13.9 419471 419495
110 6000 16.7 419479 419503
ACO pipe


ACO pipe - straight pipe 125 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
125 150 0.7 419692 419712
125 250 1.0 419694 419714
125 500 1.7 419696 419716
125 750 2.5 419698 419718
125 1000 3.3 419700 419720



EPDM
125 1500 4.9 419702 419722
125 2000 6.5 419704 419724
125 2500 8.1 419708 419728
125 3000 9.6 419706 419726
125 6000 19.0 419710 419730
L

125 150 0.7 419693 419713

125 250 1.0 419695 419715
125 500 1.7 419697 419717
125 750 2.5 419699 419719
125 1000 3.3 419701 419721
Viton®
125 1500 4.9 419703 419723
125 2000 6.5 419705 419725
ØD
125 2500 8.1 419709 419729
125 3000 9.6 419707 419727
125 6000 19.0 419711 419731

162
 Straight pipes
Straight pipes 

ACO pipe - straight pipe 160 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
160 150 1.1 98548 98598
160 250 1.6 98600 98650
160 500 2.9 98602 98652
160 750 4.1 98604 98654
160 1000 5.4 98606 98656
160 1500 7.9 98608 98658
EPDM
160 2000 10.4 98610 98660
160 2500 12.9 419280 419288
160 3000 15.4 98612 98662
160 4000 20.4 419464 419488
160 5000 25.4 419472 419496
160 6000 30.4 419480 419504
160 150 1.1 98549 98599

L
160 250 1.6 98601 98651
160 500 2.9 98603 98653
160 750 4.1 98605 98655
160 1000 5.4 98607 98657
160 1500 7.9 98609 98659
Viton®
160 2000 10.4 98611 98661
160 2500 12.9 419281 419289 ØD
160 3000 15.4 98613 98663
160 4000 20.4 419465 419489
160 5000 25.4 419473 419497
160 6000 30.4 419481 419505

ACO pipe - straight pipe 200 mm

Seal Outlet Active Weight Item Item

material diameter length number number

ACO pipe
øD [mm] L [mm] [kg] 1.4301 1.4404
200 500 4.5 419383 419384


200 1000 8.3 419387 419388
EPDM
200 2000 15.8 419391 419392
200 3000 23.2 419395 419396
200 500 4.5 419385 419386
200 1000 8.3 419389 419390
Viton®
200 2000 15.8 419393 419394
200 3000 23.2 419397 419398

ACO pipe - straight pipe 2

 50 mm

Seal Outlet Active Weight Item Item

material diameter length number number 
øD [mm] L [mm] [kg] 1.4301 1.4404 
250 500 5.5 417071 417072
250 1000 10.2 417075 417076
EPDM
250 2000 19.4 417079 417080
250 3000 28.7 417083 417084
250 500 5.5 417073 417074
250 1000 10.2 417077 417078
Viton®
250 2000 19.4 417081 417082
250 3000 28.7 417085 417086

ACO pipe - straight pipe 3

 15 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
315 500 9.8 417238 417200
315 1000 17.7 417239 417201
EPDM
315 2000 33.5 417240 417202
315 3000 49.3 417241 417203

163
  Straight pipes
Double socketed pipes

Double socketed pipes

ACO pipe - double socketed pipe 40 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
ØD
40 250 0.2 417276 417290
40 500 0.6 417278 417292

L
40 750 0.9 417280 417294
EPDM 40 1000 1.2 417282 417296
40 1500 1.8 417284 417298
40 2000 2.4 417286 417300
40 3000 3.6 417288 417302

ACO pipe - double socketed pipe 50 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
50 250 0.4 419554 419594
50 500 0.7 419556 419596
50 750 1.1 419558 419598
EPDM 50 1000 1.4 419560 419600
50 1500 2.0 419562 419602
ØD
50 2000 2.6 419564 419604
50 3000 3.9 419566 419606

L
50 250 0.4 419555 419595
50 500 0.7 419557 419597
ACO pipe

50 750 1.1 419559 419599



Viton® 50 1000 1.4 419561 419601

50 1500 2.0 419563 419603
50 2000 2.6 419565 419605
50 3000 3.9 419567 419607

ACO pipe - double socketed pipe 75 mm

Seal Outlet Active Weight Item Item

material diameter length number number



øD [mm] L [mm] [kg] 1.4301 1.4404

75 250 0.7 419568 419608
75 500 1.2 419570 419610
75 750 1.6 419572 419612
EPDM 75 1000 2.1 419574 419614
75 1500 3.0 419576 419616
75 2000 4.0 419578 419618 ØD

75 3000 5.8 419580 419620

L

75 250 0.7 419569 419609

75 500 1.2 419571 419611
75 750 1.6 419573 419613
Viton® 75 1000 2.1 419575 419615
75 1500 3.0 419577 419617
75 2000 4.0 419579 419619
75 3000 5.8 419581 419621

164
 Straight pipes
Double socketed pipes 

ACO pipe - double socketed pipe 110 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
110 500 1.7 419582 419622
110 750 2.4 419584 419624
110 1000 3.0 419586 419626
EPDM
110 1500 4.4 419588 419628
ØD
110 2000 5.7 419590 419630
110 3000 8.4 419592 419632

L
110 500 1.7 419583 419623
110 750 2.4 419585 419625
110 1000 3.0 419587 419627
Viton®
110 1500 4.4 419589 419629
110 2000 5.7 419591 419631
110 3000 8.4 419593 419633

ACO pipe - double socketed pipe 125 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
125 500 1.7 419787 419799
125 750 2.5 419789 419801

ACO pipe
125 1000 3.3 419791 419803
EPDM


125 1500 4.9 419793 419805 ØD

125 2000 6.5 419795 419807

L

125 3000 9.6 419797 419809

125 500 1.7 419788 419800
125 750 2.5 419790 419802
125 1000 3.3 419792 419804
Viton®
125 1500 4.9 419794 419806
125 2000 6.5 419796 419808
125 3000 9.6 419798 419810




165
  Straight pipes
Double socketed pipes

ACO pipe - double socketed pipe 160 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
160 500 3.3 419634 419646
160 750 4.5 419636 419648
160 1000 5.8 419638 419650
EPDM
160 1500 8.2 419640 419652 ØD

160 2000 10.7 419642 419654

L
160 3000 15.7 419644 419656
160 500 3.3 419635 419647
160 750 4.5 419637 419649
160 1000 5.8 419639 419651
Viton®
160 1500 8.2 419641 419653
160 2000 10.7 419643 419655
160 3000 15.7 419645 419657

ACO pipe - double socketed pipe 200 mm

Seal Outlet Active Weight Item Item

material diameter length number number
øD [mm] L [mm] [kg] 1.4301 1.4404
200 500 5.0 419658 419659
ØD
200 1000 8.6 419662 419663
EPDM
200 2000 15.9 419666 419667
ACO pipe

L
200 3000 23.1 419670 419671


200 500 5.0 419660 419661

200 1000 8.6 419664 419665
Viton®
200 2000 15.9 419668 419669
200 3000 23.1 419672 419673



166
 Fittings
Bends 
Bends

Product information
§§ Bends are available in 40 mm, 50 mm, §§ Push-fit system for quick assembly
75 mm, 110 mm, 125 mm, 160 mm, §§ Superior seal security – components
200 mm, 250 mm and 315 mm comprise a unique double lip sealing
external diameters system, ideal for extraneous conditions
§§ Available in 1.4301 (AISI 304) §§ Fully chemically pickled and passivated
and 1.4404 (AISI 316L) grades §§ EPDM and Viton ® seals available
stainless steel §§ Fully comply to EN 1124

ACO pipe - bend 87.5°

b b

87.5° 87.5°

a
a

Shape valid for

Shape valid for
øD 40, 50, 75,
øD 125, 200,
110 and 160.
250 and 315.
ØD
ØD

Seal material Outlet diameter Dimensions Item number Item number

øD [mm] a [mm] b [mm] 1.4404

ACO pipe
40 79 32 0.2 417342 417350
50 86 40 0.2 98700 98750


75 107 53 0.4 98702 98752
110 134 67 0.7 98704 98754
EPDM 125 161 93 0.8 419732 419734
160 181 105 1.7 98706 98756
200 215 129 3.9 419411 419413
250 297 198 5.1 - 417088
315 393 286 12.8 - 417204
50 86 40 0.2 98701 98751
75 107 53 0.4 98703 98753
110 134 67 0.7 98705 98755
Viton® 125 161 93 0.8 419733 419735


160 181 105 1.7 98707 98757
200 215 129 3.9 419412 419414
250 297 198 5.1 - 417090

167
 Fittings
Bends

ACO pipe - bend 45°

b
Shape valid for
øD 40, 50, 75, Shape valid for
a

a
110 and 160. 45° øD 125, 200, 45°

250 and 315.

ØD ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 58 21 0.2 417344 417352
50 62 24 0.2 98708 98758
75 76 32 0.3 98710 98760
110 93 42 0.5 98712 98762
EPDM 125 110 50 0.6 419736 419738
160 131 55 1.3 98714 98764
200 152 60 2.7 419407 419409
250 177 76 4.1 - 417092
315 199 91 7.2 - 417205
50 62 24 0.2 98709 98759
75 76 32 0.3 98711 98761
110 93 42 0.5 98713 98763
Viton® 125 110 50 0.6 419737 419739
160 131 55 1.3 98715 98765
200 152 60 2.7 419408 419410
250 177 76 4.1 - 417094
ACO pipe

ACO pipe - bend 30°

b
a

30°

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 55 14 0.1 417346 417354
50 57 16 0.2 98716 98766
75 71 21 0.3 98718 98768
110 85 27 0.5 98720 98770
EPDM 125 98 28 0.6 419740 419742
160 110 40 1.2 98722 98772
200 137 45 2.3 419403 419405
250 153 58 2.9 - 417096
315 172 68 5.8 - 417206
50 57 16 0.2 98717 98767
75 71 21 0.3 98719 98769
110 85 27 0.5 98721 98771
Viton® 125 98 28 0.6 419741 419743
160 110 40 1.2 98723 98773
200 137 45 2.3 419404 419406
250 153 58 2.9 - 417098

168
 Fittings
Bends 

ACO pipe - bend 15°

b
a

15°

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 53 11 0.1 417348 417356
50 54 12 0.1 98724 98774
75 66 16 0.3 98726 98776
110 78 15 0.4 98728 98778
EPDM 125 84 19 0.5 419744 419746
160 99 29 1.0 98730 98780
200 123 31 1.9 419399 419401
250 136 40 2.5 - 417100
315 151 46 5.4 - 417207
50 54 12 0.1 98725 98775
75 66 16 0.3 98727 98777
110 78 15 0.4 98729 98779
Viton® 125 84 19 0.5 419745 419747
160 99 29 1.0 98731 98781
200 123 31 1.9 419400 419402
250 136 40 2.5 - 417102

ACO pipe

ACO pipe - long bend 87.5°

e
f

87.5°

c
a
b




ØD

Outlet
Seal material Dimensions Weight Item number Item number
diameter
[kg] 1.4301 1.4404
øD [mm] a [mm] b [mm] c [mm] e [mm] f [mm]
40 105 64 50 67 40 0.2 417340 417338
50 123 71 50 75 25 0.3 419146 419000
EPDM 75 146 87 50 88 32 0.5 419148 419002
110 316 103 250 246 39 1.4 419150 419004
160 360 126 250 270 92 2.2 419152 419144
50 123 71 50 75 25 0.3 419147 419001
75 146 87 50 88 32 0.5 419149 419003
Viton®
110 316 103 250 246 39 1.4 419151 419005
160 360 126 250 270 92 2.2 419153 419145

169
 Fittings
Branches

Branches

Product information

§ Branches are available in 40 mm, § Superior seal security – components

50 mm, 75 mm, 110 mm, 125 mm, comprise a unique double lip sealing
160 mm, 200 mm, 250 mm and system, ideal for extraneous conditions
315 mm external diameters § Fully comply to EN 1124
§ Available in 1.4301 (AISI 304) § EPDM and Viton ® seals available
and 1.4404 (AISI 316L) grades § Fully pickled and passivated
stainless steel
§ Push-fit system for quick assembly

ACO pipe - single branch ACO pipe - double branch

45°

45° 45°
ØD
2

ØD

ØD
a

a
c

c
b

b
ØD
ØD
ACO pipe

ACO pipe - single branch reduction ACO pipe - double branch reduction

87.5° 87.5° 87.5°

ØD2
ØD2
ØD2

a
a

b
b

ØD1
ØD1

ACO pipe - swept single branch

87.5°
a

c
b

ØD

170
 Fittings
Single branches

Single branches

ACO pipe - single branch 87.5°

87.5°

a
b

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 101 69 0.3 417362 417368
50 106 71 0.3 98732 98782
75 139 90 0.5 98734 98784
110 183 117 0.8 98736 98786
EPDM 125 220 135 0.9 419748 419750
160 288 184 2.3 98738 98788
200 333 206 4.5 419419 419421
250 363 215 5.5 - 417104
315 476 281 14.8 - 417208
50 106 71 0.3 98733 98783
75 139 90 0.5 98735 98785
110 183 117 0.8 98737 98787
Viton® 125 220 135 0.9 419749 419751
160 288 184 2.3 98739 98789
200 333 206 4.5 419420 419422
250 363 215 5.5 - 417106

ACO pipe
ACO pipe - single branch 45°

45°
ØD
2
a

c
b

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] c [mm] [kg] 1.4301 1.4404
40 118 58 63 0.3 417366 417372
50 128 57 76 0.3 98748 98798
75 179 74 110 0.5 98800 98850
110 233 88 149 1.0 98802 98852
EPDM 125 273 103 170 1.1 419760 419762
160 332 119 222 2.6 98804 98854
200 415 151 274 5.7 419427 419429
250 513 172 336 9.2 - 417108
315 616 195 521 20.6 - 417209
50 128 57 76 0.3 98749 98799
75 179 74 110 0.5 98801 98851
110 233 88 149 1.0 98803 98853
Viton® 125 273 103 170 1.1 419761 419763
160 332 119 222 2.6 98805 98855
200 415 151 274 5.7 419428 419430
250 513 172 336 9.2 - 417110

171
 Fittings
Double branches

Double branches

ACO pipe - double branch 87.5°

87.5°

a
b

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 101 69 0.3 417364 417370
50 106 71 0.3 98740 98790
EPDM 75 139 90 0.6 98742 98792
110 183 117 0.9 98744 98794
160 288 184 2.7 98746 98796
50 106 71 0.3 98741 98791
75 139 90 0.6 98743 98793
Viton®
110 183 117 0.9 98745 98795
160 288 184 2.7 98747 98797
ACO pipe

ACO pipe - double branch 45°

45° 45°

ØD
ØD
a

c
b

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] c [mm] [kg] 1.4301 1.4404
40 118 58 63 0.4 417374 417378
50 128 57 76 0.4 98806 98856
75 179 74 110 0.7 98808 98858
EPDM 110 233 88 149 1.2 98810 98860
160 332 184 222 3.5 98812 98862
250 509 172 336 11 - 417120
315 616 195 521 29.7 - 417212
50 128 57 76 0.4 98807 98857
75 179 74 110 0.7 98809 98859
Viton® 110 233 88 149 1.2 98811 98861
160 332 184 222 3.5 98813 98863
250 509 172 336 11 - 417122

172
 Fittings
Double branches 

ACO pipe - corner branch 87.5°

87.5° 90°

ØD
a
b

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 101 69 0.3 417414 417415
50 106 71 0.4 419162 419210
EPDM 75 139 90 0.7 419164 419212
110 183 117 1.1 419166 419214
160 288 184 2.9 419168 419216
50 106 71 0.4 419163 419211
75 139 90 0.7 419165 419213
Viton®
110 183 117 1.1 419167 419215
160 288 184 2.9 419169 419217

ACO pipe




173
  Fittings
Single branch reductions

Single branch reductions

ACO pipe - single branch reduction 87.5°

87.5°

ØD2
a
b

ØD1

Seal material Outlet diameter Dimensions Weight Item number Item number
øD1 [mm] øD2 [mm] a [mm] b [mm] [kg] 1.4301 1.4404
50 40 106 98 0.3 417442 417443
75 40 139 98 0.3 417444 417445
75 50 139 90 0.3 98928 98930
110 50 183 117 0.5 98932 98934
110 75 183 117 0.8 98936 98938
EPDM 125 75 187 110 0.9 419752 419754
125 110 205 127 0.9 419756 419758
160 110 288 184 2.3 400691 400693
200 160 293 186 3.7 419415 419417
250 200 349 226 5.8 - 417112
315 250 411 248 10.5 - 417210
75 50 139 90 0.3 98929 98931
110 50 183 117 0.5 98933 98935
110 75 183 117 0.8 98937 98939
125 75 187 110 0.9 419753 419755
Viton®
125 110 205 127 0.9 419757 419759
160 110 288 184 2.3 400692 400694
200 160 293 186 3.7 419416 419418
250 200 349 226 5.8 - 417114
ACO pipe


ACO pipe - single branch reduction 45°

45°
ØD
2
a

c
b

ØD1



Seal material Outlet diameter Dimensions Weight Item number Item number
øD1 [mm] øD2 [mm] a [mm] b [mm] c [mm] [kg] 1.4301 1.4404
50 40 119 55 71 0.3 417406 417408
75 40 144 94 56 0.3 417446 417447
75 50 144 56 94 0.3 400661 400663
110 50 147 42 119 0.5 400665 400667
110 75 182 60 135 1.0 400669 400671
EPDM 125 75 200 65 141 1.1 419764 419766
125 110 250 90 160 1.1 419768 419770
160 110 332 119 191 2.6 400699 400701
200 160 359 123 250 4.7 419423 419425
250 200 429 175 307 7.6 - 417116
315 250 513 149 382 14.0 - 417211
75 50 144 56 94 0.3 400662 400664
110 50 147 42 119 0.5 400666 400668
110 75 182 60 135 1.0 400670 400672
125 75 200 65 141 1.1 419765 419767
Viton®
125 110 250 90 160 1.1 419769 419771
160 110 332 119 191 2.6 400700 400702
200 160 359 123 250 4.7 419424 419426
250 200 429 175 307 7.6 - 417118

174
 Fittings
Double branch reductions 
Double branch reductions

ACO pipe - double branch reduction 87.5°

87.5° 87.5°

ØD2
ØD2
a
b

ØD1

Seal material Outlet diameter Dimensions Weight Item number Item number
øD1 [mm] øD2 [mm] a [mm] b [mm] [kg] 1.4301 1.4404
75 50 139 90 0.3 98940 98942
110 50 183 117 0.6 98944 98946
EPDM
110 75 183 117 0.9 98900 98902
160 110 288 184 2.7 400695 400697
75 50 139 90 0.3 98941 98943
110 50 183 117 0.6 98945 98947
Viton®
110 75 183 117 0.9 98901 98903
160 110 288 184 2.7 400696 400698

ACO pipe - double branch reduction 45°

ACO pipe

45° 45°
2

ØD
ØD

2
a

c
b

ØD1 

Seal material Outlet diameter Dimensions Weight Item number Item number
øD1 [mm] øD2 [mm] a [mm] b [mm] c [mm] [kg] 1.4301 1.4404
50 40 119 55 71 0.3 417410 417412
75 50 144 56 94 0.4 400673 400675
110 50 147 42 119 0.7 400677 400679
EPDM 110 75 182 60 135 1.2 400681 400683
160 110 332 119 190 3.5 400703 400705
250 200 429 150 307 10.1 - 417124
315 250 513 149 382 17.8 - 417213
75 50 144 56 94 0.4 400674 400676
110 50 147 42 119 0.7 400678 400680
Viton® 110 75 182 60 135 1.2 400682 400684
160 110 332 119 190 3.5 400704 400706
250 200 429 150 307 10.1 - 417126

175
  Fittings
Swept single branch

Swept single branch

ACO pipe - swept single branch 87.5°

87.5°

c
b

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] c [mm] [kg] 1.4301 1.4404
40 115 55 105 0.3 417376 417380
50 128 57 117 0.3 98814 98864
EPDM 75 179 74 157 0.6 98816 98866
110 233 88 209 1.1 98818 98868
160 332 184 302 2.8 98820 98870
50 128 57 117 0.3 98815 98865
75 179 74 157 0.6 98817 98867
Viton®
110 233 88 209 1.1 98819 98869
160 332 184 302 2.8 98821 98871
ACO pipe
 


176
 Fittings
Accessories 
Accessories

Product information
§§ Accessories are available in 40 mm,
50 mm, 75 mm, 110 mm, 125 mm,
160 mm, 200 mm, 250 mm and
315 mm external diameters
§§ Available in 1.4301 (AISI 304)
and 1.4404 (AISI 316L) grades
stainless steel
§§ Push-fit system for quick assembly
§§ Superior seal security – components
comprise a unique double lip sealing
system, ideal for extraneous conditions
§§ Fully comply to EN 1124
§§ EPDM and Viton ® seals available
§§ Fully pickled and passivated

“P” trap
ØD

2.5°
c
a

ACO pipe
b


Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] c [mm] [kg] 1.4301 1.4404
50 68 187 149 0.5 98822 98872
75 94 232 193 0.7 98824 98874
EPDM
110 132 300 254 1.3 98826 98876
160 190 403 347 3.3 98828 98878
50 68 187 149 0.5 98823 98873
75 94 232 193 0.7 98825 98875
Viton®
110 132 300 254 1.3 98827 98877
160 190 403 347 3.3 98829 98879



177
 Fittings
Accessories

Straight coupling

a
ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] [kg] 1.4301 1.4404
40 51 0.1 417392 417394
50 54 0.1 98920 98970
75 75 0.2 98922 98972
110 84 0.4 98924 98974
EPDM 125 140 0.4 419813 419815
160 110 0.8 98926 98976
200 136 1.8 419431 419433
250 181 3.1 - 417159
315 179 5.2 - 417225
50 54 0.1 98921 98971
75 75 0.2 98923 98973
110 84 0.4 98925 98975
Viton® 125 140 0.4 419814 419816
160 110 0.8 98927 98977
200 136 1.8 419432 419434
250 181 3.1 - 417161

Repair coupling
ACO pipe

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] [kg] 1.4301 1.4404
50 44 0.1 98830 98880
75 46 0.2 98832 98882
110 52 0.3 98834 98884
125 70 0.3 419772 419774
EPDM
160 76 0.7 98836 98886
200 100 1.5 419435 419437
250 182 2.4 - 417139
315 179 4.9 - 417220
50 44 0.1 98831 98881
75 46 0.2 98833 98883
110 52 0.3 98835 98885
Viton® 125 70 0.3 419773 419775
160 76 0.7 98837 98887
200 100 1.5 419436 419438
250 182 2.4 - 417141
Note:
Repair couplings are used to aid a convenient repair to a damaged in-situ pipe. Unlike the standard straight coupling, there is no central registration to limit the
insertion depth of the pipe. The repair coupling slides completely over a pipe joint and simply re-positioned to bridge the required pipe joint.

Installation tip:
Mark the final position of the repair coupling on the installed pipe system to ensure the coupling seals are positioned symmetrically about the pipe joint.

178
 Fittings
Accessories 
Expansion socket

b
a

ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
40 150 90 0.2 417382 417384
50 159 102 0.2 98664 98666
75 175 113 0.3 98668 98670
110 200 121 0.5 98672 98674
EPDM
125 250 165 0.6 419776 419778
160 292 170 1.4 98676 98678
250 400 190 3.8 - 417143
315 450 200 7.2 - 417221
50 159 102 0.2 98665 98667
75 175 113 0.3 98669 98671
110 200 121 0.5 98673 98675
Viton®
125 250 165 0.6 419777 419779
160 292 170 1.4 98677 98679
250 400 190 3.8 - 417145

ACO pipe
Eccentric increaser coupling


ØD1

b
a




ØD2

Seal material Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] b [mm] [kg] 1.4404
40 50 85 5 0.3 417418
50 75 75 7 0.3 98892
50 110 110 25 0.4 98978
EPDM 75 110 110 15 0.5 98894
110 160 160 22 1.1 98896
200 250 180 15 2.4 417135
250 315 190 15 4.4 417218
50 75 75 7 0.3 98893
50 110 110 25 0.4 98979
Viton® 75 110 110 15 0.5 98895
110 160 160 22 1.1 98897
200 250 180 15 2.4 417136

179
  Fittings
Accessories

Concentric increaser coupling

ØD1

a
ØD2

Seal material Outlet diameter Dimension Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
40 75 85 0.3 417417
50 75 88 0.3 419826
50 110 113 1.4 417018
75 125 105 0.6 419828
110 125 107 0.6 419780
EPDM
110 160 126 0.9 419830
125 160 160 1.2 419811
160 200 200 1.8 419441
200 250 180 2.4 417133
315 250 190 4.4 417217
110 125 125 0.6 419781
125 160 160 1.2 419812
Viton®
160 200 200 1.8 419442
200 250 180 2.4 417134
ACO pipe


Increaser connector

ØD1
a



ØD2

Seal material Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
32 50 90 0.2 419373
NBR
40 50 90 0.2 419374

180
 Fittings
Accessories 
Connector with internal screw thread and spigot

ØD2

a
ØD1

Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
50 G 1¼" 72 0.2 98956
50 G 1½" 75 0.3 98957
50 G 2" 80 0.3 98958

Connector with external screw thread and spigot

ØD2

ACO pipe

a

ØD1

Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
50 G 1¼" 100 0.2 419330
50 G 1½" 100 0.3 419331

50 G 2" 100 0.3 419332 

181
 Fittings
Accessories

Connector with socket and internal screw thread

ØD1

a
ØD2

Seal material Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
50 G 1¼" 58 0.2 419333
EPDM 50 G 1½" 58 0.3 419335
50 G 2" 58 0.3 419337
50 G 1¼" 58 0.2 419334
Viton® 50 G 1½" 58 0.3 419336
50 G 2" 58 0.3 419338

Connector with socket and external screw thread

ØD1
a
ACO pipe

ØD2

Seal material Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
50 G 1¼" 58 0.2 419250
EPDM 50 G 1½" 58 0.3 419252
50 G 2" 58 0.3 419254
50 G 1¼" 58 0.2 419251
Viton® 50 G 1½" 58 0.3 419253
50 G 2" 58 0.3 419255

Connector cast iron spigot  ACO pipe socket

L

ØD

Outlet diameter Dimensions Weight Item number

øD [mm] L [mm] [kg] 1.4404
75 121 0.4 98904
110 137 0.6 98906
Note:
To be used with reduction sealing item number 400580 for DN 75 and 400581 for DN 110

182
 Fittings
Accessories 
Connector with socket and flange 

ØD1

a
ØD5

ØD2
ØD3
ØD4

Seal material Outlet diameter n x øD5 Dimensions Weight Item number

øD1 [mm] øD2 [mm] øD3 [mm] øD4 [mm] [mm] a [mm] [kg] 1.4404
50 DN 40 110 150 4 × 18 100 2.3 419256
50 DN 50 125 165 4 × 18 100 2.7 419258
EPDM 75 DN 65 145 185 4 × 18 100 3.4 419260
110 DN 100 180 220 8 × 18 100 4.9 419262
200 DN 200 295 340 12 × 22 102 12.0 419514
50 DN 40 110 150 4 × 18 100 2.3 419257
50 DN 50 125 165 4 × 18 100 2.7 419259
Viton® 75 DN 65 145 185 4 × 18 100 3.4 419261
110 DN 100 180 220 8 × 18 100 4.9 419263
200 DN 200 295 340 12 × 22 102 12.0 419515

Note:
n – number of holes for screws in the flange.
Flange PN 16 DIN 2633.
Flange PN 6 and PN 10 available on request.

ACO pipe

Connector with flange and spigot
ØD4
ØD3
ØD2

ØD5
a




ØD1

Outlet diameter n x øD5 Dimensions Weight Item number

øD1 [mm] øD2 [mm] øD3 [mm] øD4 [mm] [mm] a [mm] [kg] 1.4404
50 DN 40 110 150 4 × 18 192 2.3 419264
50 DN 50 125 165 4 × 18 192 2.7 419265
75 DN 65 145 185 4 × 18 245 3.4 419266
110 DN 100 180 220 8 × 18 259 4.9 419267
160 DN 150 240 285 8 × 22 200 8.5 419540
200 DN 200 295 240 12 × 22 240 12.3 419541

Note:
n – number of holes for screws in the flange.
Flange PN 16 DIN 2633.
Flange PN 6 and PN 10 available on request.

183
 Fittings
Accessories

Access unit

a
b
ØD

Seal material Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] b [mm] [kg] 1.4301 1.4404
75 139 90 0.5 98913 98963
110 183 117 0.8 98915 98965
125 210 135 0.9 419783 419785
EPDM 160 288 184 2.3 98917 98967
200 293 186 3.7 419676 419678
250 290 184 3.8 - 417128
315 340 228 8.9 - 417214
75 139 90 0.5 98914 98964
110 183 117 0.8 98916 98966
125 210 135 0.9 419784 419786
Viton®
160 288 184 2.3 98918 98968
200 293 186 3.7 419677 419679
250 290 184 3.8 - 417130

Rat-stop
ACO pipe

ØD2
L

ØD1

Seal material Outlet diameter Dimensions Weight Item number Item number
øD1 [mm] øD2 [mm] L [mm] [kg] 1.4301 1.4404
EPDM 110 250 864 3.8 419268 419270
Viton® 110 250 864 3.8 419269 419271

184
 Fittings
Accessories

Socket plug

ØD2

a
ØD1

Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] [kg] 1.4404
40 35 50 0.1 417405
50 58 45 0.1 98888
75 85 45 0.3 98889
110 120 45 0.5 98890
125 135 50 0.6 419782
160 170 50 0.5 98891
200 210 50 0.7 98994
250 260 83 1.0 417131
315 325 73 2.2 417215

Socket plug with clamp

ACO pipe
ØD1
ØD2

Outlet diameter Dimensions Weight Item number

øD1 [mm] øD2 [mm] a [mm] b [mm] [kg] 1.4404
40 417402
50 58 45 88 0.4 419138
75 85 45 120 0.6 419139
110 120 45 167 0.8 419140
160 170 50 214 1.1 419141
250 260 83 302 1.3 417132
315 325 130 371 3.7 417216

185
  Fittings
Accessories

Drainplugs with screwed plug

ØD2
ØD3

Ø
D

a
a

ØD1

Outlet diameter Dimensions Weight Item number Item number

øD1 [mm] øD2 [mm] øD3 [mm] a [mm] [kg] 1.4301 1.4404
50 64 50 25 0.08 419942 419948
75 92 75 25 0.5 419943 419949
110 126 105 15 0.5 419944 419950
125 160 124 12 0.9 419945 419951
160 186 166 20 1.2 419946 419952

Vent cowl
ACO pipe


ØD

Outlet diameter Weight Item number

øD [mm] [kg] 1.4404
110 0.4 98962



186
 Fittings
Accessories

Socket clamp

ØD

Outlet diameter a Dimensions Weight Item number

øD [mm] a [mm] [kg] 1.4404
50 40 0.11 417067
75 43 0.16 417069
110 43 0.25 417227
Note: See page 193 for maximum operating pressures

Socket clamp - two parts

ØD2
ØD3
Ø
D

a
a

ACO pipe
ØD1

Outlet diameter Dimensions Weight Item number Item number

øD [mm] a [mm] [kg] 1.4301 1.4404
40 36 0.10 417396 417397
50 40 0.14 417024 417025
75 40 0.25 417026 417027
110 43 0.34 417028 417029
125 45 0.38 417016 417017
160 45 0.48 417030 417031
200 45 0.51 – 419983
250 45 0.71 – 417137
315 48 0.9 417219 –
Note: See page 193 for maximum operating pressures

187
  Fittings
Accessories

Seal

Outlet diameter Weight Item number Item number Item number

øD [mm] [kg] EPDM NBR Viton®
40 0.01 417400 417401 –
50 0.01 98400 417037 98404
75 0.02 98401 417038 98405
110 0.05 98402 417039 98406
125 0.06 419453 417041 419454
160 0.08 98403 417040 98407
200 0.10 98433 417042 98437
250 0.12 417146 417148 417147
315 0.30 417222 417223 –
Note:
Detailed technical data sheet on page 228

Reduction sealing cast iron spigot  ACO pipe socket 

ACO pipe


Outlet diameter Weight Item number

øD [mm] [kg] EPDM
DN 70/75 0.06 400580
DN 100/110 0.10 400581
DN 150/160 0.14 400582
Note:
While purchasing AP reduction sealing cast iron spigot  ACO pipe, it is necessary to order AP cast iron connector.



Reduction sealing ACO pipe spigot  cast iron socket

Outlet diameter Weight Item number

øD [mm] [kg] EPDM
DN 70/75 0.05 400586
DN 100/110 0.08 400587
DN 150/160 0.12 400588

188
 Fittings
Accessories 
ACO Universal lubricant

1 kg
0.15 kg

Weight [kg] Item number

0.15 E80350000
1.00 E80350001

Fixing plate
ØD

Outlet diameter Dimensions Weight Item number Item number

øD [mm] a [mm] [kg] Galvanised steel 1.4404
8.4 70 0.05 400525 400521

Support bracket with rubber infill

ACO pipe

Outlet diameter Weight Item number Item number
øD [mm] [kg] Galvanised steel 1.4404
40 0.12 417434 417359
50 0.14 400533 400529
75 0.23 400534 400530
110 0.33 400535 400531
125 0.36 419854 419855
160 0.39 400536 400532
200 0.44 419451 419675
250 0.60 – 417149 
315 1.0 – 417224 

Support bracket with rubber infill and stirrup

a

Outlet diameter Dimensions Weight Item number Item number

øD [mm] a [mm] [kg] Galvanised steel 1.4404
50 56 0.18 400541 400537
75 80 0.28 400542 400538
110 116 0.41 400543 400539
160 166 0.48 400544 400540

189
 Fittings
Accessories
417361

Support bracket with rubber infill and key

a
Outlet diameter Dimensions Weight Item number Item number
øD [mm] a [mm] [kg] Galvanised steel 1.4404
50 120 0.16 400549 400545
75 133 0.26 400550 400546
110 150 0.38 400551 400547
160 175 0.44 400552 400548

Threaded support pole M8

ØD

øD Weight Item number Item number

L [mm]
[mm] [kg] Galvanised steel 1.4404
M8 1000 0.39 400557 400553
M8 90 0.03 400558 400554
M8 40 0.016 400559 400555
ACO pipe

Set for axial fixing

Weight Item number Item number

[kg] Galvanised steel 1.4404
0.11 400565 400561

Joiner/disjoiner

øD [mm] Weight [kg] Item number

100 - 400 25 417070

190
 Fittings
Accessories

Electric cutter 50 – 110 mm

Note Weight [kg] Item number

in plastic case 20 400745
Note: Convinient tool for pipe cutting, suitable for larger projects

Manual cutter set 50-110 mm

ACO pipe
Note Weight [kg] Item number
in plastic case 3.50 419363

Manual cutter

øD [mm] Weight [kg] Item number

50–110 1.0 419364
110–160 2.0 400738
160–250 2.0 417228
Note:
ACO pipe manual cutter should be ordered together with a holder for manual cutting.

191
  Fittings
Accessories

Holder for manual cutting

øD [mm] Weight [kg] Item number

125 3.5 419857
160 4.0 400742
200 4.5 400743
Note: ACO pipe holder for manual cutting should be ordered together with ACO pipe manual cutter.

Replacement discs for manual cutters

Note Weight [kg] Item number

for cutter 419363 0.005 419365
for cutters 400738 and 419364 0.005 400578
Note:
ACO pipe

Minimum order quantity – 10 pcs.

 


192
 Flow rates
Full bore flow rate tables for varying gradients 
Full bore flow rate tables for varying gradients

For rainwater/storm drainage applications

Flow rates based on Colebrook-White formula.
Roughness coefficient ks = 0.6 mm

Gradient Pipe ø 50 mm Pipe ø 75 mm Pipe ø 110 mm Pipe ø 125 mm

Flow Flow Flow Flow
Velocity Velocity Velocity Velocity
[%] rate rate rate rate
v [m/s] v [m/s] v [m/s] v [m/s]
Q [l/s] Q [l/s] Q [l/s] Q [l/s]
10.0 2.74 1.52 8.40 2.01 23.81 2.60 33.61 2.83
7.5 2.38 1.31 7.28 1.74 20.62 2.25 29.11 2.45
5.0 1.94 1.07 5.94 1.42 16.83 1.84 23.77 2.00
4.5 1.84 1.02 5.64 1.35 15.97 1.74 22.55 1.90
4.0 1.73 0.96 5.31 1.27 15.06 1.64 21.26 1.79
3.5 1.62 0.90 4.97 1.19 14.08 1.54 19.88 1.67
3.0 1.50 0.83 4.60 1.10 13.04 1.42 18.41 1.55
2.5 1.37 0.76 4.20 1.00 11.90 1.30 16.80 1.41
2.0 1.23 0.68 3.76 0.90 10.64 1.16 15.03 1.26
1.5 1.06 0.59 3.25 0.78 9.22 1.01 13.01 1.10
1.0 0.87 0.48 2.66 0.63 7.53 0.82 10.63 0.89

Gradient Pipe ø 160 mm Pipe ø 200 mm Pipe ø 250 mm Pipe ø 315 mm

Flow Flow Flow Flow
Gradient Velocity Velocity Velocity Velocity
rate rate rate rate
[%] v [m/s] v [m/s] v [m/s] v [m/s]
Q [l/s] Q [l/s] Q [l/s] Q [l/s]
10.0 64.15 3.31 116.89 3.83 218.31 4.45 401.51 5.15
7.5 55.56 2.87 101.22 3.32 188.95 3.85 347.54 4.46

ACO pipe
5.0 45.36 2.34 82.65 2.71 154.13 3.14 283.52 3.64
4.5 43.03 2.22 78.40 2.57 146.17 2.98 268.90 3.45


4.0 40.57 2.10 73.92 2.43 137.77 2.81 253.45 3.25
3.5 37.95 1.96 69.14 2.27 128.82 2.63 236.99 3.04
3.0 35.13 1.81 64.01 2.10 119.20 2.43 219.31 2.82
2.5 32.07 1.66 58.43 1.92 108.74 2.22 200.09 2.57
2.0 28.68 1.48 52.26 1.71 97.18 1.98 178.83 2.30
1.5 24.84 1.28 45.26 1.48 84.05 1.71 154.70 1.99
1.0 20.28 1.05 36.95 1.21 68.48 1.40 126.07 1.62

Note:

ACO
The flow rates shown above assume an unrestricted discharge from the pipe. For installations without an unrestricted discharge, the flow rate will be affected
by the downstream throttle. ACOpipe

pipe

For shallow gradients, the Colebrook-White formula underestimates flow rates (because when gradient tends towards zero %, velocity also tends to zero).
For level or nearly level installations (slope < 1 %), spatially varied flow tables should be used.

193
  Flow rates
Full bore flow rate tables for varying gradients

For soil/foul water drainage applications

Flow rates based on Colebrook-White formula.

Roughness coefficient ks = 0.6 mm

Gradient Pipe ø 50 mm Pipe ø 75 mm Pipe ø 110 mm Pipe ø 125 mm

Flow Flow Flow Flow
Velocity Velocity Velocity Velocity
[%] rate rate rate rate
v [m/s] v [m/s] v [m/s] v [m/s]
Q [l/s] Q [l/s] Q [l/s] Q [l/s]
10.0 2.30 1.27 7.14 1.71 20.45 2.23 28.97 2.44
7.5 1.99 1.10 6.19 1.48 17.71 1.93 25.09 2.11
5.0 1.63 0.90 5.05 1.21 14.46 1.58 20.49 1.72
4.5 1.54 0.85 4.79 1.14 13.72 1.50 19.43 1.64
4.0 1.46 0.80 4.52 1.08 12.94 1.41 18.32 1.54
3.5 1.36 0.75 4.23 1.01 12.10 1.32 17.14 1.44
3.0 1.26 0.70 3.91 0.93 11.20 1.22 15.87 1.34
2.5 1.15 0.64 3.57 0.85 10.23 1.12 14.49 1.22
2.0 1.03 0.57 3.19 0.76 9.15 1.00 12.96 1.09
1.5 0.89 0.49 2.77 0.66 7.92 0.86 11.22 0.94
1.0 0.73 0.40 2.26 0.54 6.47 0.71 9.16 0.77

Gradient Pipe ø 160 mm Pipe ø 200 mm Pipe ø 250 mm Pipe ø 315 mm

Flow Flow Flow Flow
Velocity Velocity Velocity Velocity
[%] rate rate rate rate
v [m/s] v [m/s] v [m/s] v [m/s]
Q [l/s] Q [l/s] Q [l/s] Q [l/s]
10.0 55.61 2.87 101.81 3.34 206.87 4.22 382.95 4.92
7.5 48.16 2.49 88.17 2.89 177.84 3.62 329.47 4.23
ACO pipe

5.0 39.32 2.03 71.99 2.36 143.52 2.93 266.21 3.42



4.5 37.30 1.93 68.30 2.24 135.71 2.77 251.81 3.23

4.0 35.17 1.82 64.39 2.11 127.46 2.60 236.59 3.04
3.5 32.90 1.70 60.23 1.98 118.69 2.42 220.42 2.83
3.0 30.46 1.57 55.76 1.83 109.29 2.23 203.07 2.61
2.5 27.80 1.44 50.90 1.67 99.10 2.02 184.25 2.37
2.0 24.87 1.28 45.53 1.49 87.86 1.79 163.50 2.10
1.5 21.53 1.11 39.43 1.29 75.18 1.53 140.05 1.80
1.0 17.58 0.91 32.19 1.06 60.25 1.23 112.42 1.44

Note:
ACO pipe

The flow rates shown above assume an unrestricted discharge from the pipe. For installations without an unrestricted discharge, the flow rate will be affected
by the downstream throttle.


For shallow gradients, the Colebrook-White formula underestimates flow rates (because when gradient tends towards zero %, velocity also tends to zero).
For level or nearly level installations (slope < 1 %), spatially varied flow tables should be used.

194
 Operating pressures
Operating pressures 
Operating pressures

The ACO pipe socketed stainless steel ACO pipe stainless steel pipe systems are
pipe systems are fitted with an unique, designed for maximum working pressure
double lip seal manufactured from either 0.5 bar according to EN 1124. In case
EPDM or Viton®. The double lip seal where higher pressure may apply, it is
arrangement provides added security necessary to combine the system with
for the ultimate long term reliability. The socket clamps.
ACO pipe; socketed stainless steel pipe
systems are tested and approved for
operating pressures in gravity, siphonic
and vacuum systems.

Operating pressure
Pipe diameter Vacuum applications
[bar]
Without socket With socket Pipe diameter Operating pressure
[mm]
clamp clamp [mm] [bar]
40 0.5 2.0 40 -0.8
50 0.5 2.0 50 -0.8
75 0.5 2.0 75 -0.8
110 0.5 2.0 110 -0.8
125 0.5 2.0 125 -0.8
160 0.5 1.0 160 -0.8
200 0.5 1.0 200 -0.8
250 0.5 1.0 250 -0.8
315 0.5 1.0 315 -0.8

ACO pipe

ACO
ACOpipe

pipe

195
 Transport & handling
Content
Transport & handling

196
 Transport & handling
Content

Appendix Page

Transport & handling Transport & handling information 198

ACO gullies and ACO channels - Introduction 200

ACO fire protective solution ACO gullies and ACO channels - Installation and function 201

ACO pipes - Installation and function 202

Introduction 204

Principles of cleaning 205

Cleaning chemicals 206

Cleaning procedures Manual cleaning of drainage 207

       
Chemical cleaning of drainage 208

Overview with recommended cleaning

209
procedures for drainage

ACO hygienic gully 210

ACO hygienic box channel 213

ACO vinyl box channel 215

Typical installation examples ACO modular box channel 216

ACO modular slot channel 219

ACO pipe 221

ACO protective covers 224

Resistance of Material 226

Material
Sealing material information 228

ACO pipe

197
  Transport & handling
Transport & handling information

Transport & handling information

ACO gully ACO channel

§§ ACO gullies are packed on framed pallets, protected §§ The maximum transportable length of channel is 6 000 mm.
by cardboard inserts and PE foil. Individual products are In case of container or air transport, the recommended maximum
packed in protective plastic net. transport length is 2 000 mm. Long channels over 6 000 mm are
§§ Outlet pipes are equipped with protective lids. standardly divided in 6 m sections with transport joins.
§§ Gully tops and flanges are covered with protective blisters, §§ If one piece channel is required, the channel will have to be
which also protect the inside areas during installation. welded on site. Please contact our Sales/Technical department.
Individual products are packed in plastic protective net. §§ ACO channel is for such requirement packed on framed/ non
§§ Handle the gully/ gully parts with care. Any rough manipulation framed pallets fixed by plastic tape.
(like dragging along the ground, dumping off the truck...) can §§ Products are protected by wooden inserts and frames,
cause deformation and potentially cause product malfunctions. in some cases PE foil or bubble foil is used.
§§ Contact with carbon steel may cause stainless steel corrosion. §§ Articles are either wrapped seperately in ACO paper box
or placed loose within EUR pallet space. It is strongly
recommended that channels / channel parts / accessories
are transported in their original packaging to avoid damage
and / or loss of parts.
§§ Store preferably on dry and flat surface.
§§ Handle the channels/ channel parts/ accesories with care.
Careful truck un/loading procedures are crucial. Any rough
manipulation (like dragging along the ground, dumping off
the truck etc...) can cause deformation and potentially cause
product malfunctions.
§§ Contact with carbon steel may cause stainless steel corrosion.
Appendix


198
 Transport & handling
Transport & handling information


ACO grating ACO pipe

§§ Standard grating length for ACO hygienic box channel §§ Maximum transport length of straight pipes pallets
is 500 mm and 1 000 mm for ACO modular box channel. is 6 080 mm and width 820 mm.
§§ ACO grating is packed on framed pallets protected by cardboard §§ Straight pipes are packed on framed/ non framed long
inserts and PE foil. pallets, protected by wooden inserts and supports.
§§ Articles are either wrapped seperately in ACO paper box §§ Articles are either wrapped in cardboard and stretch
or placed loose within EUR pallet space. or PE foil. Fittings are packed in cardboard boxes and
§§ It is strongly recommended to transport gratings in their original stacked on foiled EUR pallets.
packaging to avoid damage. Store preferably on dry and flat §§ It is strongly recommended to transport and store the pipes
surface. and fittings in their original packaging to avoid damage and/or
§§ Handle the gratings with care. the loss of parts. Store preferably on dry and flat surface.
§§ Any rough manipulation (like dragging along the ground, §§ Handle the pipes and fittings with care. Any rough handling (like
dumping off the truck...) can cause deformation and potentially dragging along the ground, dumping off the truck...) can cause
cause product malfunctions. deformation and potentially cause product malfunctions.
§§ Contact with carbon steel may cause stainless steel corrosion. §§ Contact with carbon steel may cause stainless steel corrosion.

Appendix


199
 ACO fire protective solution
ACO gullies and ACO channels - Introduction

ACO gullies and ACO channels - Introduction

ACO has developed a solution which ACO fire protective kit can be used with ACO hygienic gully and ACO hygienic box
prevents the spreading of fire and high telescopic vertical or fixed height vertical channel installed with ACO fire protective
temperatures within different building´s ACO hygienic gully and with ACO hygienic kit can be connected to any kind
floors where ACO hygienic gully, box channel, consisting of following items: of sewerage with ACO pipe regardless
ACO hygienic channel and ACO pipe § External protection – Fit in of its material, e.g. non combustible cast
are installed. § Internal protection iron drain pipes SML, stainless steel
§ Fire protective foul air trap ACO pipe (building material class A1) or
The solution has been tested according § Fire protective foul air trap support plastic drain pipes (building material class
to EN 1366-2 Fire resistance tests B1/B2). All mentioned components of
for service installations and classified This solution has been designed and tested external and internal protection must be
according to EN 13501 Fire classifications for use in either concrete or aerated used to guarantee correct function of fire
of construction products and building concrete ceiling slabs with a minimum protection!
elements. For classification details please height of 150 mm.
see chart below. Tested at: PAVUS, a.s. protocol:
No. Pr-13-2.061

ACO hygienic box

channel

ACO hygienic gully

(vertical, telescopic)

Fire protective FAT

support ring

Fire protective FAT

Fit-in
(external thermal
insulation)

Gully type Outlet diameter Classification

75 EI 180
ACO hygienic gully 142
110 EI 120
75 EI 180
ACO hygienic gully 157
Appendix

110 EI 120
110 EI 180
ACO hygienic gully 218
160 EI 90

Classification according to EN 13 501, protocol: PK2-11-13-901-C-0

ACO hygienic gully 142 – Accessories  Page 72 ACO hygienic gully 218 – Accessories  Page 74
200 ACO hygienic gully 157 – Accessories  Page 73
 ACO fire protective solution
ACO gullies and ACO channels - Installation and function

ACO gullies and ACO channels - Installation and function

Before activation Fire activation

§§ Installation scheme with assembled §§ Function of fire protective solution to
fire protective solution in ceiling prevent the spread of fire within storey
construction. structure by transmission (ACO gully).

§§ Time preventing the spread of fire

is limited from 90 minutes to 180
minutes.

Appendix


201
  ACO fire protective solution
ACO pipe - Installation and function

ACO pipe - Installation and function

ACO pipe push-fit system is classified and Special certificate of fire resistance Non combustibility:
certified as a non-combustible product for coated pipes (no. CSI PK-13-083) is §§ Non combustible
(as it is manufactured in compliance to available. §§ No additional fire collars needed at
EN 1124, part 1 & part 2). This standard installation
classifies the ACO pipe systems as class Fire certificates from marine authorities §§ No toxic fumes emitted in case of fire
A1 fire resistant (highest rating). are available. §§ EN 1124

ACO pipe systems are certified also by

SITAC authority as fire resistant (cert. no.
0410-01).

100

75

Non-combustibility
20

ACO pipe Cast iron Plastic

A1 A2 B
Appendix


202
 ACO fire protective solution
Notes


Notes

Appendix


203
  Cleaning procedures
Introduction

Introduction

Drainage is a critical component affecting may originate from specific equipment Effective cleaning of drainage in
the hygienic performance of commercial discharge points, or be simply the result commercial food preparation business
food preparation business. Effective of an accidental spillage. Quite often reduces risk of contamination and spoiling
drainage helps to mitigate hazards from the liquids contains other components – of food during preparation, processing,
the external environment and is central to organic matter being predominant. Floor and storage. The main objective of
the safe and hygienic operation internally. drainage components cater for these cleaning is to remove soil to obtain clean
Within the food production facility, surface situations through three core functions surface and thereby reduce number of
liquids represent potential hazard of - interception, conveyance of fluids, and microorganisms. A further reduction
microbiological contamination. Liquids ability to act as a barrier. of microorganism can be obtained by
may be part of the cleaning process, or disinfection step.
Appendix


204
 Cleaning procedures
Principles of cleaning

Principles of cleaning

The principles of cleaning involve combination of thermal, kinetic and chemical energy. The cleaning processes are always combination
of these factors and time of these to work. The key point to highlight is that all equipment – including drainage – in food processing
plant should have hygienic design, which is easy to clean and disinfect. Otherwise the cleaning process is time and energy consuming
and not cost effective. All surfaces of ACO stainless steel drainage are hygienically designed – no sharp corners, edges, dead spaces
and crevices. ACO drainage is easily accessible for cleaning and visual inspection.

The effectiveness of drainage cleaning

depends on number of factors:

§§ Soil type and properties

§§ Material, design and surfaces
§§ Water quality
§§ Cleaning chemicals
§§ Cleaning procedure
§§ Cleaning parameters; like temperature,
time, flow velocity and concentration of
chemicals

There are two different types of We also differenciate cleaning The last is a distinction between
surface to be cleaned: process as whether it is applied dry whether the cleaning process is done
or wet. manually or automatically.
Product contact surface Dry cleaning Manual cleaning
All equipment that itentionally or Dry cleaning is essentially a mechanical Manual cleaning is generally considered
unitentionally (e.g. due to splashing) comes removal of soils using sweeping, brushing, as labour intensive and, therefore often
to contact with final product or from which wiping and vacuuming. Enviroments expensive. The manual tools should be
product or condensate may drain, drop or typically to be cleaned by dry methods hygienic – resistant to applied chemicals
be drawn into the main product or product include plants which are producing flour, and suitable for a specific operation. On
container. cocoa, dry milk products, dry soups and top of it; operators should be properly
dry infant formulas. trained to be able to perform cleaning
Non product contact surface as expected to achieve clean surfaces.
All other exposed surfaces, including Wet cleaning ACO drainage has all elements of hygienic
surfaces associated with equipment, such Wet cleaning involves application of fluids design that makes cleaning of ACO
as support structures, control panels and (usually water based) to achieve the drainage much easier and faster when
external surfaces. It also includes surfaces desired cleaning result. This can be applied compared to competitive products.
related to the manufacturing environment, to Open Plant Cleaning (OPC): surfaces
such as floors, walls and drain channels. to be cleaned have to be accessible Automatic cleaning
to fluids. In addition, some components Utensils and dismantled parts of
Appendix

may be physically removed from equipment are cleaned and disinfected

production area and cleaned separately automatically in industrial washing


– Cleaning out of place (COP). Drainage machines, tray or tunnel washers

systems require wet cleaning. (automatic COP). CIP is also defined as
automatic cleaning system.

205
  Cleaning procedures
Cleaning chemicals

Cleaning chemicals

There are three main classes of The plant downtime and labour
cleaning compounds: associated with cleaning is major
§§ detergents cost of any food processing operation.
§§ alkalies
§§ acids Sources of soil
§§ disinfectants/sanitizers Primary source of soil is from processed
food product itself. Microbiological bio-
Detergents films mainly contribute to the soil build ups
This broad group of chemicals is widely on drainage surfaces. These films vary in
used in households and in food industries their solubility depending upon such fac-
brings different type of soil from surfaces tors as heat effect, age, dryness, time,
into cleaning foams and emulsions that etc. It is essential that personel involved
could be easily rinsed off. in the cleaning process design have un-
derstanding of the nature of the soil to
Alkalies be removed before selecting a detergent
Alkaline compounds are effective for and cleaning method. The rule of thumb is
dissolution of proteins and removal of fats. that acid cleaners dissolve alkalaine soils
Example of alkalies are sodium hydroxide (minerals), and and detergents disolve acid
(caustic soda) and potassium hydroxide. soils and food wastes (proteins).
These compounds are hazzardeous
to personnel and mostly used in CIP –
automatic dosing system is recommended.

Acids
Acids, both organic and inorganic, are
commonly used for removal of mineral
deposits, such as: hard water scale or
milkstone. Acids are potentialy corrosive
to construction materials and must be
used with care.

When chemical cleaning is performed, it is

neccesseray to use low-pressure sprays,
foam or gel. Foam and gel are more
viscous than sprayed agents and preferred
as they are not prone to aerosol formation.
Selection of the correct detergent for
given application should be always done in
co-operation with the detergent supplier.

Disinfectants/sanitizers
In case of high risk area‘s or production
areas with microbiological sensitive prod-
ucts, the floors and drain systems should
be sprayed with disinfectants/sanitizers,
which will reduce the contamination risk
Appendix

even more. The disinfectants/sanitizers

will kill remaining micro-organisms, accord-


ing to the required specifications.

206
 Cleaning procedures
Manual cleaning of drainage

Manual cleaning of drainage

1 Remove all present grocery, 7 Wash all surfaces with

raw materials, wrapping designated detergent and
materials and tools. designated hand brush.

2 Cover all equipment 8 Rinse all surfaces with clean

that could be contaminated. water.

3 Remove excess dirt from floor 9 Visually check surface

and gratings, and place cleanliness - repeat cleaning
into designated container. process if neccessary.

4 Remove gratings. 10 Place silt basket and grating to

its original position.

5 Remove and empty silt 11 Rinse the entire equipment with

basket and foul air trap. clean water.

6 Place collected waste and

dirt into designated container.
Rinse grating, silt basket and
foul air trap with clean water.
Then place foul air trap into
its original position.
Appendix


207
  Cleaning procedures
Chemical cleaning of drainage

Chemical cleaning of drainage

1 Remove all present grocery, 7 Apply foam to all surfaces.

raw materials, wrapping
materials and tools.

2 Cover all equipment 8 Leave foam for 15 minutes.

that could be contaminated.

15 minut

3 Remove excess dirt from floor 9 Rinse off foam with clean water.
and gratings; and place
into designated container.

4 Remove gratings. 10 Visually check surface

cleanliness - repeat cleaning process if
neccessary.

5 Remove and empty silt 11 Place silt basket and

basket and foul air trap. grating to its original position.

6 Place collected waste and 12 Rinse the entire equipment with clean
dirt into designated container. water.
Rinse grating, silt basket and
foul air trap with clean water.
Then place foul air trap into
its original position.
Appendix


208
 Cleaning procedures
Overview with recommended cleaning procedures for drainage

Overview with recommended cleaning procedures for drainage

These instructions are for guidance only. Always follow manufacturer´s instructions.
All procedures have to be verified and adjusted to the application specifics.

Examples of chemical
cleaning agents suitable
Frequency Procedure Physical agents Chemical agents
for ACO stainless steel
drainage

Daily Removal of organic §§ Steam §§ Caustics Standard chemical agents

deposits (fats, §§ Medium pressure (sodium hydroxide, used for floor cleaning
proteins, saccharides water to max 25 bar potassium should be sufficient
and polysaccharides) §§ Mechanical / kinetic hydroxide) (should be validated)
energy (brushes, §§ Detergents / Oxofoam, Endorochlor
CIP medium surfactants (Diversey)
velocity)

Weekly Removal of inorganic Mechanical abrasive §§ Nitric acid for §§ Acifoam (Diversey)
deposits that could methods – polishing stainless steel §§ Acigel (Diversey)
promote very resistent passivation where §§ Super Dilac (Diversey)
biofilms chlorine attack
could be expected
§§ Inorganic acids
(phosphoric acid)
§§ Weak organic acids

Note Removal of rinse water Removal of excess Alcohols Chlorine tablets (Suma Tab
residues water with a squeegee (isopropylalcohol, D4 by Diversey) are often
ethanol) added to the water in foul
trap in microbial sensitive
production area‘s

Any cleaning procedures, including those recommended by equipment suppliers, must be properly validated at the equipment, where it
will be applied and on the soil that could be expected even after certain time of usage.

Always follow manufacturer´s instructions to avoid damage to the equipment.

Appendix


209
  Typical installation examples
ACO hygienic gully

ACO hygienic gully

ACO hygienic gully – telescopic flanged gully installed in suspended concrete slab construction

1 2

1 Ceramic tiles
5
2 Tile cement
3 Mastic sealant 6
4 Floor screed
5 Water proof membrane (WPM)
6 Gully
7 Suspended concrete slab core-boared to
accept gully body

ACO hygienic gully – telescopic flanged gully and raising flanged piece installed in suspended
concrete slab construction

1 2
3

5
7
1 Ceramic tiles
2 Tile cement
3 Mastic sealant 6
7
4 Floor screed
5 Water proof membrane (WPM)
6 Insulation
7 Double flange gully
Appendix

8 Suspended concrete slab core-boared to

accept gully body
8


210
 Typical installation examples
ACO hygienic gully


ACO hygienic gully – telescopic flanged gully installed in solid concrete floor

1
2
3
4

1 Ceramic tiles 5

2 Tile cement 6
3 Mastic sealant
4 Floor screed
5 Water proof membrane (WPM)
6 Flange gully
7 Solid concrete floor slab
8 Compacted soil
7

ACO hygienic gully – telescopic flanged gully and raising piece installed in solid concrete floor

1
2
3

5
1 Ceramic tiles
2 Tile cement 7
6
3 Mastic sealant
4 Floor screed
7
5 Water proof membrane (WPM)
6 Insulation
7 Double flange gully
Appendix

8 Solid concrete floor slab

8


9 Compacted soil

211
  Typical installation examples
ACO hygienic gully

ACO hygienic gully – fixed height gully installed in solid concrete floor

1 Ceramic tiles
4
2 Tile cement
3 Mastic sealant
4 Floor screed
5
5 Dampf proof membrane (DPM)
6 Gully 6
7 Outlet pipe
8 Floor slab 7
9 Compacted soil

9
Appendix


212
 Typical installation examples
ACO hygienic box channel

ACO hygienic box channel

ACO hygienic box channel standard type – ACO hygienic gully with adhesive bonding flange
(Tiled floor)

1
2

1 Ceramic tiles
2 Tile cement 5
4
3 Mastic sealant 6

4 Rubber infill 7
5 Floor screed
6 Water proof membrane
7 Solid concrete floor slab

ACO hygienic box channel standard type – ACO hygienic gully with mechanical clamping flange
(Tiled floor)

1 2

1 Ceramic tiles
2 Tile cement 5 4
6
3 Mastic sealant
4 Rubber infill
5 Floor screed 7
6 Water proof membrane
7 Solid concrete floor slab
Appendix

8 Compacted soil


8
8

213
  Typical installation examples
ACO hygienic box channel

ACO hygienic box channel standard type – ACO hygienic gully with location flange (Resin floor)

1 Epoxy/resin floor
2 Floor screed
2 3
3 Rubber infill
4 Solid concrete floor slab
5 Compacted soil 4

ACO hygienic box channel extendend type – ACO hygienic gully with location flange (Tiled floor)

2
1 3
5

1 Ceramic tiles
2 Tile cement 6 4
3 Mastic sealant
4 Rubber infill
7
5 Water proof membrane
6 Floor screed
7 Solid concrete floor slab
Appendix

8 Compacted soil
8


214
 Typical installation examples
ACO vinyl box channel

ACO vinyl box channel

ACO vinyl box channel – ACO hygienic gully with location flange (Vinyl floor)

1 Vinyl floor
2 Floor screed 2
3 Solid concrete floor slab
4 Compacted soil
3

4
8

Appendix


215
  Typical installation examples
ACO modular box channel

ACO modular box channel

ACO modular box channel standard type – ACO hygienic gully with adhesive bonding flange
(Tiled floor)

1
2
3

1 Ceramic tiles
2 Tile cement
3 Mastic sealant
5 4
4 Rubber infill 6

5 Floor screed
7
6 Water proof membrane
7 Solid concrete floor slab

ACO modular box channel standard type – ACO hygienic gully with mechanical clamping flange
(Tiled floor)

1
2
3

1 Ceramic tiles
2 Tile cement
3 Mastic sealant 5 4
6
4 Rubber infill
5 Floor screed
6 Water proof membrane
Appendix

7 Solid concrete floor slab

7
8 Compacted soil


216
 Typical installation examples
ACO modular box channel


ACO modular box channel standard type – ACO hygienic gully with location flange (Resin floor)

1 Epoxy/resin floor
2 Floor screed
3 Rubber infill
2 3
4 Solid concrete floor slab
5 Compacted soil

ACO modular box channel vinyl type – ACO hygienic gully with location flange (Vinyl floor)

1 Vinyl floor
2 Vinyl seal 2
3 Floor screed 3

4 Solid concrete floor slab

5 Compacted soil
Appendix

4


217
  Typical installation examples
ACO modular box channel

ACO modular box channel standard type – direct connection to sewage pipe system (Resin floor)

1 Epoxy/resin floor
2 Floor screed
3 Rubber infill 3
4 Solid concrete floor slab 2

5 Compacted soil

5
Appendix


218
 Typical installation examples
ACO modular slot channel

ACO modular slot channel

ACO modular slot channel standard type – ACO hygienic gully with adhesive bonding flange (Tiled floor)

1 Ceramic tiles
2 Tile cement
6
3 Mastic sealant
5 4
4 Rubber infill
5 Floor screed
7
6 Water proof membrane
7 Solid concrete floor slab

ACO modular slot channel standard type – ACO hygienic gully with mechanical clamping flange (Tiled floor)

1
3

1 Ceramic tiles
2 Tile cement 6

3 Mastic sealant 5
4
4 Rubber infill
5 Floor screed
6 Water proof membrane 7
7 Solid concrete floor slab
Appendix

8 Compacted soil


219
  Typical installation examples
ACO modular slot channel

ACO modular slot channel standard type – ACO hygienic gully with location flange (Resin floor)

1 Epoxy/resin floor
2 Floor screed
3 Rubber infill
4 Solid concrete floor slab 2 3

5 Compacted soil

5
Appendix


220
 Typical installation examples
ACO pipe

ACO pipe

Generally

The following standards will help designers Pipe jointing

to select the correct size of pipe system for The assembly of pipe joints is quick and
a particular application: EN 12056: gravity straightforward requiring only a light
drainage systems inside buildings. EN 752: application of lubricant available from ACO
drain and sewer systems outside buildings. to the chamfered pipe end. Ensure that the
Installation should be in accordance with matching ends of the pipes and fittings are
the manufacturer’s recommendations as clean and free from contamination. Push-fit
well as with EN 12056–2, EN 12056–3 the pipe end into the socket, but do not push
and EN 752. fully into the socket recess so as to allow for
thermal expansion within the system.
Pipe cutting
If it is necessary to adapt or shorten pipe
lengths where tools are used, the cut must
be square, clean and chamfered.

Suitable cutters are available from ACO.

These tools are designed to form the edge

bevel on the male spigoted end of the pipe.
Carbon steel cutting wheels are not suitable.

Vertical pipe stacks

The load applied with a fluid in the pipe

is vertically down. Position the highest
bracket adjacent to the top inlet of the
pipe, then mount brackets at 3 meter
spacings. At the bottom of the vertical
pipe, use a bracket within 200 mm of the
bottom. Fit brackets at each change of
pipework is direction or junction points.
Pipework should be at least 30 mm from
the wall to facilitate maintenance and
painting.

Pipe weights
Engineers should be aware of minimum
and maximum weights when designing Max. distance 3 m
vertical stack and horizontal pipe run
systems. Generally, when the pipe is
completely full of water, then the vertical
Appendix

deflection of the pipe between brackets

should not exceed 1.5 mm. The discretion


of the installer should be applied in

each instance to ensure that the pipe is
adequately supported.

221
  Typical installation examples
ACO pipe

Horizontal pipe runs

As a guide, use the table below for bracket

spacing on horizontal pipes.

Pipe diameter bracket spacing

Pipe Length
ø [mm] [m]
40 2.0
50 2.0
75 2.3
110 2.5
125 3.0
200 3.0
Ma x .
distan
250 3.0 ce 2 –
3m

Recommended distances; for installation

follow your local standards.

Horizontal pipework should be supported immediately downstream of the fitting.

by pipe brackets in 3 meter intervals Horizontal pipe runs may be installed at
maximum. One bracket should be within a fall of 1 in 50 and feeder connections
300 mm of the pipe joint and the other should be achieved using 45° branches.
approximately at the midpoint of the pipe Where long pipe runs occur i.e. greater
length, but not more than 3 metres from than 15 meters, a fixing arm should
the next bracket (depending on the pipe be attached to the bracket to prevent
diameter- refer to the upper table). pendulum movement within the system.

Additional brackets should be used at

changes of direction and at junction points
Appendix


222
 Typical installation examples
ACO pipe


Below ground installation

Back-filling
Back-filling around the pipe can only start
when the position of the pipe has been
checked and approved.

Compression
Care should be taken to avoid distortion of
both the pipe run and the pipe itself during
back-filling and compaction. Avoid tipping
backfill material directly onto the pipe sys-
tem. If mechanical compaction is used, the
weight and resultant compressive force must
be taken into account to avoid distortion.
Back-fill materials should be compacted to
a minimum of 93%.

Filling in the excavation

Soil from the excavation can be used for
filling, but larger stones and blocks should
not be used. Compression of the filling
material outside reinforced areas is not
necessary if the settling will not cause
problems or damage.

Local standards
It is recommended to install pipes according
to local standards.

Appendix


223
 Typical installation examples
ACO protective covers

ACO protective covers

Description

Features and benefits: ACO protective covers made from Order information:
§ Protection from building material debris OSB are available for: § For standard articles, add _C at the end
§ Eliminates cleaning of drainage after § All ACO hygienic gullies and ACO of product article number
installation hygienic box channels, standard, (example: 111111_C)
§ Prevents injuries on worksite semi-standard and customized § For semi-standard and customized
§ Certified according to EN 12811-1 for § ACO vinyl box channels, standard, articles, specify this option in the order
scaffolding load class 3 semi-standard and customized process
§ Eco friendly and easily disposable § Gully tops on ACO slot channels,
semi-standard and customized
Appendix

Maximum load
Load area Maximum pressure
capacity

200 x 200 mm max. 100 kg max. 2.5 N/cm2

500 x 500 mm max. 150 kg max. 0.6 N/cm2
1000 x 1000 mm max. 200 kg max. 0.2 N/cm2
Classification according to EN 12811-1 for scaffolding load class 3

224
 Typical installation examples
Notes


Notes

Appendix


225
  Material
Resistance of Material

Resistance of Material

Note:

AISI 316 L Stainless

AISI 304 Stainless

1 = V ery good service to operating limit Concentration levels and length of exposure have a direct
of material influence on the resistance of stainless steel to certain
2 = Moderate service chemicals. Each application should therefore be carefully
3 = Limited or variable service reviewed to determine the suitability of stainless steel.

EPDM

TPEV
4 = Unsatisfactory

NBR

FPM
Assumptions:
Data presented are used as a guide only, for detailed
Acetone 1 1 1 4 4 1 information please contact our Sales/Technical department.
Acetic acid (diluted) 30% 1 1 1 2 2 1
Acetic acid 100% 1 1 1 3 3 1
Acetic acid anhydride 1 1 2 3 4 2
Aluminium chloride 4 4 1 1 1 1
Aluminium sulfate 1 4 1 1 1 1
Ammonium carbonate 1 1 1 4 2 1
Ammonium chloride 2 3 1 1 1 1
Ammonium hydroxide 1 1 1 4 2 1
Amyl chloride 1 1 4 4 1 4
Anilin 1 1 2 4 3 1
Anilin hydrochloride 4 4 2 2 2 2
Barium chloride 2 2 1 1 1 1
Barium hydroxide 1 1 1 1 1 1
Benzaldehyde 1 1 1 4 4 1
Benzene 1 1 4 4 1 4
Benzoic acid 1 1 4 4 1 1
Borax 1 1 1 2 1 1
Boric acid 1 1 1 1 1 1
Bromine 4 4 4 4 1 4
Bromine chloride acid 4 4 1 2 1 2
Bromine hydrogen acid 4 4 1 4 1 2
Bromoethylene 1 1 - - - -
Butanol 1 1 4 1 1 3
Butyl acetat 1 1 2 2 4 3
Butyric acid 1 1 2 4 4 3
Calcium bisulfate el sulfite 1 1 4 1 1 1
Calcium chloride 2 2 1 1 1 1
Calcium hydroxide 1 1 1 1 1 1
Calcium hypoklorite 2 3 1 3 1 3
Carbon disulfide 1 1 4 4 1 3
Carbon tetrachloride 1 1 4 3 1 4
Chloracetic acid (mono) 4 4 2 4 4 2
Chloride 4 4 - - - -
Chloril acid 4 4 1 4 - 3
Chlorine (dry) 1 1 1 2 1 4
Chlorobenzene 1 1 4 4 1 4
Chloroform 2 2 4 4 1 4
Chlorosulfonic acid 2 3 4 4 3 4
Copper chloride 2 2 1 1 1 1
Copper nitrate 1 1 1 1 1 1
Copper sulfate 1 1 1 1 1 1
Ether 1 1 3 4 3 3
Ethyl chloride 1 1 1 1 1 3
Fatty acid 1 1 4 2 1 1
Appendix

Fluorine (dry) 1 1 - - - -
Fluorine hydrogen acid 4 4 2 4 1 4


Formaldehyde 1 1 1 2 1 1
Formic acid 1 1 1 2 3 2
Furfural 1 1 2 4 4 4
Gallic acid 1 1 2 2 1 2
Hydrochloric acid 4 4 1 4 1 1
Hydrogen peroxide 1 1 3 4 2 3
Iodine (wet) 4 4 2 2 1 2
Lead acetate 1 1 1 2 4 1

226
 Material
Resistance of Material


Note:

AISI 316 L Stainless

AISI 304 Stainless

1 = V ery good service to operating limit Concentration levels and length of exposure have a direct
of material influence on the resistance of stainless steel to certain
2 = Moderate service chemicals. Each application should therefore be carefully
3 = Limited or variable service reviewed to determine the suitability of stainless steel.

EPDM

TPEV
4 = Unsatisfactory

NBR

FPM
Assumptions:
Data presented are used as a guide only, for detailed
Magnesium chloride 2 2 1 1 1 1 information please contact our Sales/Technical department.
Magnesium sulfate 1 1 1 1 1 1
Mercury 1 1 1 1 1 1
Methanol 1 1 1 1 3 1
Methyl chloride 1 1 3 4 1 3
Methylene chloride 2 2 4 4 2 4
Natphalene 1 1 4 4 1 1
Nickel chloride 2 2 1 1 1 1
Nickel sulfate 1 1 1 1 1 1
Nitric acid 3 3 3 4 1 4
Oxalic acid 3 3 1 2 1 2
Perchloric acid 4 4 2 4 1 1
Phorsphor acid 1 1 2 4 1 1
Picric acid 1 1 2 2 1 2
Potassium bromide 1 1 1 1 1 1
Potassium carbonate 1 1 1 2 1 1
Potassium chlorate 1 1 1 1 1 1
Potassium cyanide 1 1 1 1 1 1
Potassium hydroxide 1 1 1 2 2 1
Potassium nitrate 1 1 1 1 1 1
Potassium permanganate 1 1 1 3 1 1
Potassium sulfate 1 1 1 1 1 1
Potassium sulfide 1 1 1 1 1 1
Potassiumchloride 2 2 1 1 1 1
Prophylene dichloride 1 1 4 4 1 4
Sal ammoniac 2 3 1 1 1 1
Silver nitrate 1 1 1 2 1 1
Soda (ash) 1 1 1 1 1 1
Sodium acetate 1 1 1 2 4 1
Sodium bicarbonate 1 1 1 1 1 1
Sodium bisulfate 1 3 1 2 1 1
Sodium bisulfite 1 1 1 1 1 1
Sodium bromide 2 2 1 3 1 2
Sodium chlorate 1 1 1 2 1 1
Sodium chloride 4 4 1 1 1 1
Sodium cyanide 1 1 1 1 1 1
Sodium fluoride 1 1 1 1 1 1
Sodium hydroxide 1 1 1 2 2 1
Sodium hypoklorite 4 4 2 2 1 1
Sodium nitrate 1 1 1 2 2 1
Sodium sulfate 1 1 1 1 1 1
Sodium sulfide 1 1 1 1 1 1
Sodium sulfite 1 1 1 1 1 1
Stannicous chloride 2 3 2 1 1 2
Sulfur 1 1 1 4 1 1
Appendix

Sulfur chloride 1 1 4 3 1 3
Sulfur dioxide 1 2 1 4 1 1


Sulfuric acid 4 4 2 4 1 3
Sulfurous acid 1 3 2 2 1 2
Tionyl chloride 1 1 4 4 1 4
Toluene (toluol) 1 1 4 4 1 4
Trichloroethylene 1 1 4 3 1 4
Turpentine 1 1 4 1 1 4
Xylene (xylol) 1 1 4 4 2 4
Zinc sulfate 1 1 1 1 1 1

227
  Material
Sealing material information

Sealing material information

Sealing material information

EPDM FPM TPEV

(ethylene propylene diene monomer) (fluoroelastomer) – Viton® (thermoplastic elastomer vulkanized)
Black sealing rubber ring, which is suitable Green sealing rubber ring which is suitable Sealing rubber with excellent heat
for most applications where there are no for special applications where oil, solvents resistance, physical and mechanical
oil or petrol residues in the waste water. and strong acids are present in waste properties. Suitable for pharmaceutical,
water; and for applications with higher medical, food and beverage applications.
NBR temperatures. Viton ® seal has limited TPEV has limited resistance in oil or petrol
(acryl nitrile-butadiene rubber) resistance to chemicals like acetone, residues in waste water.
Black sealing rubber ring which is suitable methyl alcohol.
for waste water applications where
there are petrol or oil residues. NBR
is not resistant to solvents and high
temperatures.

Sealing materials

Rubber type EPDM NBR FPM (Viton®) TPEV

Colour black black green red

Temperature range -50 / +130 / +150 °C -30 / +80 / +100 °C -20 / +200 / +300 °C -35 / +120 / +140 °C

Resistance

Water excellent good good excellent

Chemicals

Acids good fair excellent good

Bases good fair excellent excellent

Benzene/Petrol unsatisfied excellent excellent limited

Oils

ASTM Oil No. 1 unsatisfied excellent excellent limited

ASTM Oil No. 3 unsatisfied excellent excellent limited

Ozone & weather stresses good limited good good

To be sure of suitability for special

applications please consult exact seal
material features within ACO installation
guide.
Appendix


228
 Material
Notes


Notes

Appendix


229
All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products
are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each
product is fit for its intended purpose and that the actual conditions of use are suitable. This brochure and any advice is provided free of charge and
accordingly on terms that no liability (including liability for negligence) will attach the Company or its servants or agents arising out of or in connection
with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale,
copies of which are available on request. The Company’s policy of continuous product development and improvement renders specifications liable to
modification. Information provided in this brochure is therefore subject to change without prior notification.

ACO Industrial Drainage catalogue/En/Q4/17/JMa & MVa/ Subject to technical changes without notice. CZ 080