STA.
ELENA INTEGRATED SCHOOL
                           Poblacion, Sta. Elena Camarines Norte
                             4TH PERIODICAL EXAMINATION
                      T.L.E CONSUMER ELECTRONICS SERVICING
NAME___________________________                          DATE __________
SECTION_________________                                 SCORE_________
Directions: Multiple Choice. Choose the best option.
1. Which equipment does NOT belong to the group?
a. Screw driver b. Diagonal cutter c. Long nose pliers d. Side cutting
2. What is the reason why threads become stripped? g
 a. screws are over tighten c. screws are molded b. screws are heated d. Screws are
painted
3. What equipment is/are used for safety?
a. VOM c. OHS b. PPE d. All of those mentioned
4. Which is NOT part of the group?
a. Soldering iron b. Soldering tool stand c. Desoldering tool d. Wire stripper
5. Which hand tool is used solely for cutting metals?
a. Utility knife b. Magnifying glass c. Saw d. Paint brush
6. Which component resists the flow of current in an electrical circuit?
A) Capacitor B) Inductor C) Resistor D) Transistor
7. What kind of component is a resistor?
A) Combined B) Discrete C) Integrated D) Hybrid
8. What color in the color coding scheme has an equivalent of 5 in the 2nd band? A)
Brown B) Green C) Red D) Yellow
9. What is the color of the tolerance representing ± 10%?
A) Gold B) Black C) Orange D) Silver
10. What is the value of a resistor with the following colors : Green - Black- Silver-
Gold?
A) 500 Ohms ±5% C) 5.0 Ohms ± 5% B) 50 Ohms ± 5% D) 0.5 Ohm ± 5%
Directions: Multiple Choice. Choose the best option.
11. What is the item in the color coding scheme that allows the color-coded value to
deviate to a certain extent?
A) Multiplier C) Limitation B) Body color D) Tolerance
12. What is the decimal equivalent of 10%?
A) .01 C) 1.0 B) 0.1 D) 10
13. What is 10% of 220?
A) 210 C) 22 B) 2.2 D) 11
14. What Is the maximum deviation of a 220ohms + 10% tolerance?
A) 230ohms C) 224 ohms B) 242 ohms D) 236 ohms
15. What is the minimum deviation of – 10% tolerance of the same resistor cited in no.
4?
A) 90 ohms C) 190 ohms B) 198 ohms D) 210 ohms
II-IDENTIFY THE PARTS OF OHMMETER
III-DRAW THE SCHEMATIC SYMBOLS OF THE FOLLOWING ELECTRONIC
COMPONENTS
21. Ground                                     26. Fixed resistor
22.Battery                                     27. SCR
23.Capacitor                                   28. Zener diode
24. Inductor                                   29. Variable inductor
25. Fuse                                       30. Dc motor
    IV- GIVE THE VALUE OF A RESISTOR OF THE FOLLOWING COLORS (2 pts each)
   Black-brown-black
   Yellow-black-white-silver
   Orange-green-red-gold
   Red-blue-brown-no color
   Green-orange-red-silver
   Brown- black-brown-gold
   Blue-black-red-silver
   Yellow-blue-yellow-silver
   Black-orange-brown-gold
   Violet-gray-red-no color
                                                           PREPARED BY:
                                                          MICHELLE V. HAO