Reference Info_2016_4.
qxd 6/11/2015 2:58 PM Page 9
MOTOR ELECTRICAL PROTECTION
INTRODUCTION
Electrical supply, while generally very reliable, is subject to influences that can result in
inadequately protected motors being damaged.
As the heart of the motor is the windings, they need to be protected from failure.
During normal operation, thermal, mechanical and electrical stresses can be
encountered by motors.
POSSIBLE PROBLEMS
Refer to pages N-10 to N-16, Fan Trouble Shooting, for a list of possible problems
and solutions.
PROTECTION DEVICES
There are motor protective devices available which detect a range of abnormal
conditions and automatically switch off the motor.
Different protective devices and the conditions they protect are:-
Fuses
short circuit between phases or earth
high current overload
Thermal Overload Relays
current overload
start-up problems
stalling
phase imbalance (three-phase motors)
over-temperature
phase loss (single-phasing of three-phase motors)
under-voltage
incorrect phase sequences (three-phase motors)
Thermistors and Thermal Contacts
over-temperature of the windings
WARRANTY
Note that warranty is void if the thermal contacts are not used.
AS/NZS3000:2007 wiring rules state that motors required to run unattended shall be
fitted with over-temperature devices such as thermal overload relays. If this is not
complied with, warranty will be void.
A licensed electrical contractor or engineer, experienced in motor protection, should be
engaged to assess the motors and specific requirements of the installation.
© FANTECH 2016 REFERENCE INFORMATION O-9
