Templates

Sector : TVET

Qualification Title: TRAINING

Unit of Competency: Plan Training Session

Module Title: Planning Training Session

Technical Education & Skills Development Authority

NATIONAL TVET TRAINERS ACADEMY
Marikina City
 Plan
Training
Session

Date Developed: Document No.

July 2010 Issued by:
Trainers
Date Revised:
Methodology Level I February 2012 Page i of vii
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
Sample Data Gathering Instrument for Trainee’s
Characteristics
Please answer the following instrument according to the
characteristics described below. Encircle the letter of your choice that best
describes you as a learner. Blank spaces are provided for some data that
need your response.
Characteristics of learners

Language, literacy Average grade in: Average grade in:

and numeracy English Math
(LL&N)
a. 95 and above a. 95 and above
b. 90 to 94 b. 90 to 94
c. 85 to 89 c. 85 to 89
d. 80 to 84 d. 80 to 84
a. 75 to 79 e. 75 to 79

Cultural and Ethnicity/culture:

language a. Ifugao
background
b. Igorot
c. Ibanag
d. Gaddang
e. Muslim
f. Ibaloy
g. Others( please specify)_____________

Education & Highest Educational Attainment:

general a. High School Level
knowledge
b. High School Graduate
c. College Level
d. College Graduate
e. with units in Master’s degree
f. Masteral Graduate
g. With units in Doctoral Level
h. Doctoral Graduate
Sex a. Male
b. Female

Date Developed: Document No. NTTA-TM1-01

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 2 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
Sample Data Gathering Instrument for Trainee’s
Characteristics
Please answer the following instrument according to the
characteristics described below. Encircle the letter of your choice that best
describes you as a learner. Blank spaces are provided for some data that
need your response.
Characteristics of learners

Language, literacy Average grade in: Average grade in:

and numeracy English Math
(LL&N)
e. 95 and above f. 95 and above
f. 90 to 94 g. 90 to 94
g. 85 to 89 h. 85 to 89
h. 80 to 84 i. 80 to 84
b. 75 to 79 j. 75 to 79

Cultural and Ethnicity/culture:

language h. Ifugao
background
i. Igorot
j. Ibanag
k. Gaddang
l. Muslim
m. Ibaloy
n. Others( please specify)_____________

Education & Highest Educational Attainment:

general i. High School Level
knowledge
j. High School Graduate
k. College Level
l. College Graduate
m. with units in Master’s degree
n. Masteral Graduate
o. With units in Doctoral Level
p. Doctoral Graduate
Sex c. Male
d. Female
Age Your age: _____
Date Developed: Document No. NTTA-TM1-01
Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 3 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
 Characteristics of learners
Physical ability 1. Disabilities(if any)_____________________
2. Existing Health Conditions (Existing illness if
any)
a. None
b. Asthma
c. Heart disease
d. Anemia
e. Hypertension
f. Diabetes
g. Others(please specify) ___________________

Previous TM Certificates
experience with a. TQ certified
the topic b. TM graduate
c. TM trainer
d. TM lead trainer
Number of years as a competency trainer ______

Previous List down trainings related to TM

learning ___________________________
experience ___________________________
___________________________
National Certificates acquired and NC level
Training Level
___________________________
completed
___________________________

Special courses Other courses related to TM

a. Units in education
b. Master’s degree units in education
c. Others(please specify)
_________________________

Learning styles a. Visual - The visual learner takes mental

pictures of information given, so in order for
this kind of learner to retain information,
oral or written, presentations of new
information must contain diagrams and
drawings, preferably in color. The visual
learner can't concentrate with a lot of activity
around him and will focus better and learn
faster in a quiet study environment.
b. Kinesthetic - described as the students in
the classroom, who have problems sitting
still and who often bounce their legs while
tapping their fingers on the desks. They are
Date Developed: Document No. NTTA-TM1-01
Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 4 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
 Characteristics of learners

often referred to as hyperactive students with

concentration issues.
c. Auditory- a learner who has the ability to
remember speeches and lectures in detail
but has a hard time with written text. Having
to read long texts is pointless and will not be
retained by the auditory learner unless it is
read aloud.
d. Activist - Learns by having a go
e. Reflector - Learns most from activities where
they can watch, listen and then review what
has happened.
f. Theorist - Learns most when ideas are linked
to existing theories and concepts.
g. Pragmatist - Learns most from learning
activities that are directly relevant to their
situation.
Other needs a. Financially challenged
b. Working student
c. Solo parent
d. Others(please specify)
___________________________

Date Developed: Document No. NTTA-TM1-01

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 5 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
FORM 1.1 SELF-ASSESSMENT CHECK

INSTRUCTIONS: This Self-Check Instrument will give the trainer necessary

data or information which is essential in planning training
sessions. Please check the appropriate box of your answer
to the questions below.
CORE COMPETENCIES
CAN I…? YES NO
1.

2.

3.

4.

5.

Note: In making the Self-Check for your Qualification, all required competencies
should be specified. It is therefore required of a Trainer to be well- versed
of the CBC or TR of the program qualification he is teaching.

Date Developed: Document No. NTTA-TM1-01

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 6 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
Evidences/Proof of Current Competencies(Sample)

Form 1.2: Evidence of Current Competencies acquired related to

Job/Occupation

Current
Proof/Evidence Means of validating
competencies

Date Developed: Document No. NTTA-TM1-01

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 7 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
 Identifying Training Gaps

From the accomplished Self-Assessment Check (Form 1.1) and the

evidences of current competencies (Form 1.2), the Trainer will be able to
identify what the training needs of the prospective trainee are.

Form 1.3 Summary of Current Competencies Versus Required

Competencies (Sample)

Required Units of Current Training

Competency/Learning Competencies Gaps/Requirements
Outcomes based on CBC
1.

Required Units of Current Training

Competency/Learning Competencies Gaps/Requirements
Outcomes based on CBC
2.

3.

4.

Date Developed: Document No. NTTA-TM1-01

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 8 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
 Using Form No.1.4, convert the Training Gaps into a Training Needs/
Requirements. Refer to the CBC in identifying the Module Title or Unit of
Competency of the training needs identified.

Form No. 1.4: Training Needs (Sample)

Training Needs Module Title/Module of

Instruction
(Learning Outcomes)
1.

2.

3.

6.

7.

Date Developed: Document No. NTTA-TM1-01

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 9 of 250
Developed by: NTTA
Templates Redilyn C. Agub
Revision # 01
 In template form, the session plan will look like this.
SESSION PLAN
Sector :
Qualification Title :
Unit of Competency :
Module Title :
Learning Outcomes:

A. INTRODUCTION
B. LEARNING ACTIVITIES
LO 1:
Learning Content Methods Presentation Practice Feedback Resources Time

LO 2:

C. ASSESSMENT PLAN
 Written Test
 Performance Test
D. TEACHER’S SELF-REFLECTION OF THE SESSION

Date Developed: Document No. NTTA-TM1-01

July 2010 Issued by:
Trainers Methodology Level I Date Revised:
February 2012 Page 10 of 250
Templates Developed by: NTTA
NTTA
Revision # 01
PARTS OF A COMPETENCY-BASED LEARNING MATERIAL

References/Further Reading

Performance Criteria Checklist

Operation/Task/Job Sheet

Self Check Answer Key

Self Check

Information Sheet

Learning Experiences

Learning Outcome Summary

Module
Module Content
Content

Module
List of Competencies
Content

Module Content

Module Content

Front Page
In our efforts to standardize CBLM,
the above parts are recommended for
use in Competency Based Training
(CBT) in Technical Education and
Skills Development Authority (TESDA)
Technology Institutions. The next
sections will show you the
components and features of each part.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 11 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 (Qualification Title)
COMPETENCY-BASED LEARNING MATERIALS

List of Competencies

No. Unit of Competency Module Title Code

1.

2.

3.

4.

5.

6.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 12 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 MODULE CONTENT

UNIT OF COMPETENCY

MODULE TITLE

MODULE DESCRIPTOR:

NOMINAL DURATION:

LEARNING OUTCOMES:
At the end of this module you MUST be able to:
1.
2.
3.
4.

ASSESSMENT CRITERIA:
1.
2.
3.
4.
5.
6.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 13 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
LEARNING OUTCOME NO. 4
(LO Title)

Contents:

1.
2.
3.
4.
5.
Assessment Criteria

1.
2.
3.
4.

Conditions

The participants will have access to:

1.
2.
3.
Assessment Method:

1.
2.
3.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 14 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Learning Experiences
Learning Outcome 1
(LO TITLE)

Learning Activities Special Instructions

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 15 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Information Sheet _______
(Title)

Learning Objectives:
After reading this INFORMATION SHEET, YOU MUST be able to:
1.
2.

(Introductory Paragraph)

(Body)

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 16 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Self- Check ______

(Type of Test) : (Instruction)

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 17 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 ANSWER KEY ____

1.
2.
3.
4.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 18 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 TASK SHEET _____
Title:

Performance Objective: Given (condition), ,you should be able to

(performance) following (standard).

Supplies/Materials :

Equipment :

Steps/Procedure:
1.
2.
3.
4.

Assessment Method:

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 19 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Performance Criteria Checklist ______

CRITERIA
YES NO
Did you….
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 20 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 JOB SHEET _____
Title:

Performance Objective: Given (condition), ,you should be able to

(performance) following (standard).

Supplies/Materials :

Equipment :

Steps/Procedure:
5.
6.
7.
8.

Assessment Method:

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 21 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Performance Criteria Checklist ______

CRITERIA
YES NO
Did you….
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 22 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Evidence Plan

Competency
standard:
Unit of
competency:
Ways in which evidence will be collected:

Demonstration & Questioning

Observation & Questioning
[tick the column]

Third party Report

Portfolio

Written
The evidence must show that the trainee…













NOTE: *Critical aspects of competency

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 23 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 TABLE OF SPECIFICATION

# of
Objectives/Content
Knowledge Comprehension Application items/
area/Topics
% of test

TOTAL

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 24 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Performance Test

Specific Instruction for the Candidate

Qualification

Unit of Competency

General Instruction:

Specific Instruction:

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 25 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
QUESTIONING TOOL
Satisfactory
Questions to probe the candidate’s underpinning knowledge respon
se
Extension/Reflection Questions Yes No
1.  
2.  
3.  
4.  
Safety Questions
5.  
6.  
7.  
8.  
Contingency Questions
9.  
10.  
11.  
12.  
Job Role/Environment Questions  
13.  
14.  
15.  
16.  
Rules and Regulations  
17.  
18.  
19.  
20.  
The candidate’s underpinning  Satisfactory  Not
knowledge was: Satisfactory

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 26 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Templates for Inventory of Training Resources
Resources for presenting instruction
 Print Resources As per TR As per Remarks
Inventory

 Non Print Resources As per TR As per Remarks

Inventory

Resources for Skills practice of Competency #1

______________________________
 Supplies and Materials As per TR As per Remarks
Inventory

 Tools As per TR As per Remarks

Inventory

 Equipment As per TR As per Remarks

Inventory

Note: In the remarks section, remarks may include for repair, for
replenishment, for reproduction, for maintenance etc.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 27 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Supervise
Work-Based
Learning

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 28 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
FORM 1.1 SELF-ASSESSMENT CHECK

INSTRUCTIONS: This Self-Check Instrument will give the trainer necessary

data or information which is essential in planning training
sessions. Please check the appropriate box of your answer
to the questions below.
CORE COMPETENCIES
CAN I…? YES NO
6.

7.

8.

9.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 29 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
CORE COMPETENCIES
CAN I…? YES NO
10.

Note: In making the Self-Check for your Qualification, all required competencies
should be specified. It is therefore required of a Trainer to be well- versed
of the CBC or TR of the program qualification he is teaching.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 30 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Evidences/Proof of Current Competencies(Sample)

Form 1.2: Evidence of Current Competencies acquired related to

Job/Occupation

Current
Proof/Evidence Means of validating
competencies

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 31 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Identifying Training Gaps

From the accomplished Self-Assessment Check (Form 1.1) and the

evidences of current competencies (Form 1.2), the Trainer will be able to
identify what the training needs of the prospective trainee are.

Form 1.3 Summary of Current Competencies Versus Required

Competencies (Sample)

Required Units of Current Training

Competency/Learning Competencies Gaps/Requirements
Outcomes based on CBC
1.

Required Units of Current Training

Competency/Learning Competencies Gaps/Requirements
Outcomes based on CBC
2.

3.

4.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 32 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Using Form No.1.4, convert the Training Gaps into a Training Needs/
Requirements. Refer to the CBC in identifying the Module Title or Unit of
Competency of the training needs identified.

Form No. 1.4: Training Needs (Sample)

Module
Gaps Title/Module of Duration (hours)
Instruction

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 33 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 TRAINING PLAN

Qualification: ____________________________

Trainees’ Training Training Mode of

Staff
Requirements Activity/Task Training

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 34 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Technical Education and Skills Development Authority
___(your institution)___

TRAINEE’S RECORD BOOK

I.D.

Trainee’s No._______________

NAME: ___________________________________________________

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 35 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 column regarding the outcome of the task accomplished by
the trainees. Be sure that the trainee will personally
QUALIFICATION: PLUMBING NC II_______
accomplish the task and confirmed by the instructor.
It is of great importance that the content should be
TRAINING DURATION :____________________________ written legibly on ink. Avoid any corrections or erasures and
maintain the cleanliness of this record.

TRAINER: __________________________________________________ This will be collected by your trainer and submit the
same to the Vocational Instruction Supervisor (VIS) and shall
form part of the permanent trainee’s document on file.

THANK YOU.

Instructions:
This Trainees’ Record Book (TRB) is intended to serve as
record of all accomplishment/task/activities while undergoing
training in the industry. It will eventually become evidence
that can be submitted for portfolio assessment and for
whatever purpose it will serve you. It is therefore important
that all its contents are viably entered by both the trainees
and instructor.
The Trainees’ Record Book contains all the required
competencies in your chosen qualification. All you have to do
is to fill in the column “Task Required” and “Date
Accomplished” with all the activities in accordance with the
training program and to be taken up in the school and with
the guidance of the instructor. The instructor will likewise
indicate his/her remarks on the “Instructors Remarks”
Date Developed: Document No. NTTA-TM1-07
Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 36 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Date Developed: Document No. NTTA-TM1-07
Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 37 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
NOTES:

__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 38 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Unit of Competency: 1 PREPARE PIPES FOR INSTALLATION

NC Level I Unit of Competency: 2 PERFORM MINOR CONSTRUCTION

Learning Task/Activity Date Instructors WORKS
Outcome Required Accomplished Remarks
 Lay out NC Level I
measurements
 Cut pipe Learning Task/Activity Date Instructors
within the Outcome Required Accomplished Remarks
required Perform
length and piping lay
according to outs
job Cut pipes
requirements through
 Thread pipes walls and
in accordance floors
with standard
thread
engagement ____________________ ______________________
Trainee’s Signature Trainer’s
__________________ ___________________ Signature

Trainee’s Signature Trainer’s Signature

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 39 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Unit of Competency: 3 MAKE PIPING JOINTS AND
CONECTIONS

NC Level I Unit of Competency: 4 PERFORM SINGLE UNIT PLUMBING

Learning Task/Activity Date Instructors INSTALLATION AND ASSEMBLES
Outcome Required Accomplished Remarks
Fit-up NC Level I
joints and
Learning Task/Activity Date Instructor
fittings for
Outcome Required Accomplishe s Remarks
PVC pipe
d
Perform
threaded Prepare for
pipe joints plumbing works
and Install pipe and
connections fittings
Caulk Install hot and
joints\ cold water supply
_____________________ ______________________ Install/assemble
Trainee’s Signature Trainer’s Signature plumbing fixtures

_____________________ ____________________
Trainee’s Signature Trainer’s Signature

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 40 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Unit of Competency: 5 PERFORM PLUMBING REPAIR AND
MAINTENANCE WORKS

NC Level I
Learning Task/Activity Date Instructors
Outcome Required Accomplished Remarks
 Clear
clogged
pipes
clear
clogged
fixtures
______________________ ____________________
Trainee’s Signature Trainer’s Signature

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 41 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 TRAINEE’S PROGRESS SHEET

Name : JUAN DELA CRUZ Trainer :

Nominal
Qualification : Machining NC I :
Duration
Training Training Date Date Trainee’s Supervisor’s
Units of Competency Rating
Activity Duration Started Finished Initial Initial

Total
Note: The trainee and the supervisor must have a copy of this form. The column for rating maybe used either by giving a numerical rating or
simply indicating competent or not yet competent. For purposes of analysis, you may require industry supervisors to give a numerical rating for
the performance of your trainees. Please take note however that in TESDA, we do not use numerical ratings

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 42 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Average Ratings

PREPARATION Average
1. Workshop layout conforms
with the components of a
CBT workshop
2. Number of CBLM is
sufficient
3. Objectives of every training
session is well explained
4. Expected activities/outputs
are clarified
General Average

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 43 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Facilitate
Learning
Session

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 44 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Training Activity Matrix

Venue
Facilities/Tools Date &
Training Activity Trainee Remarks
and Equipment (Workstation/ Time
Area)
Prayer
Recap of Activities 8:00 AM
All to 8:30
Unfreezing Activities AM
trainees
Feedback of Training

Rejoinder/Motivation
observations
(List down all
on the
Facilities/Tools
(Specific Activities of progress of
and Equipment Name of
each Trainee for the each trainee
needed for the Workstation1
day here) for the day
workstation and
will be written
activities here)
here
observations
(Specific Activities of (List down all
on the
each Trainee here) Facilities/Tools
progress of
and Equipment Name of
each trainee
needed for the Workstation 2
for the day
workstation and
will be written
activities here)
here
observations
(List down all
on the
Facilities/Tools
(Specific Activities of progress of
and Equipment Name of
each Trainee for the each trainee
needed for the Workstation 3
day here) for the day
workstation and
will be written
activities here)
here
observations
(List down all
on the
Facilities/Tools
(Specific Activities of progress of
and Equipment Name of
each Trainee for the each trainee
needed for the Workstation 4
day here) for the day
workstation and
will be written
activities here)
here

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 45 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Trainers Date Developed: Document No. NTTA-TM1-07
Methodology Level I July 2010 Issued by: Page 46 of 61
Date Revised:
February 2012
Templates Developed by: NTTA
NTTA
Revision # 01
 Trainers Date Developed: Document No. NTTA-TM1-07
Methodology Level I July 2010 Issued by: Page 47 of 61
Date Revised:
February 2012
Templates Developed by: NTTA
NTTA
Revision # 01
Minutes of the Meeting Template

Minutes of the Meeting

Focus Group Discussion
Date Developed: Document No. NTTA-TM1-07
Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 48 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Date: ________________________
Agenda:
Competency-based Training Delivery
Present:
1. ____________
2. ____________
3. ____________
4. ____________

CBT Concerns Discussions Resolutions/Agreement

1. CBT Layout
2. Monitoring of
Attendance
3. Utilization of work
area
4. Orientation
a. CBT
b. Roles
c. TR
d. CBLM
e. Facilities
f. Evaluation system
5. RPL

6. Teaching methods
and technique
7. Monitoring of
learning activities
a. Achievement
chart
b. Progress chart
8. Feedback
9. Slow learners
10. Other
concerns

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 49 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Training Evaluation Report

1. Title of the Report

2. Executive summary

3. Rationale

4. Objectives

5. Methodology

6. Results and discussion

This is the body of the report. It should contain the following
parts:
Data interpretation
Data analysis
Conclusion

7. Recommendation

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 50 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
Maintain
Training
Facilities

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 51 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Date Developed: Document No. NTTA-TM1-07
Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 52 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Template #1
OPERATIONAL PROCEDURE
Equipment Type
Equipment Code
Location
Operation Procedure:

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 53 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Template #2

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 54 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 HOUSEKEEPING SCHEDULE
Qualification Station/Bldg Welding (WAF)

Area/Section

In-Charge

Schedule for the 2nd Semester, 2011

Responsible
ACTIVITIES Daily Every Weekly Every Month Remarks
Person other 15th ly
Day Day
1. Clean and check welding
equipment/ accessories
from dust and oil; dry and
properly laid-out/
secured/stable
2. Clean and free welding
booths and welding
positioners from
dust/rust /gums, used Mig
wire stubs and metal
scraps
3. Clean and arrange working
tables according to floor
plan/lay-out; check
stability
4. Clean and check floor,
walls, windows, ceilings
• graffiti/dust/rust
• cobwebs and
outdated/unnecessary
objects/items
• obstructions
• any used
materials/scraps
(slugs, stubs) spilled
liquid
• open cracks (floor)
5. Clean and check work shop
ventilation and
illumination by dusting
lamps/bulbs, replacing
non-functional lamps and
keeping exhaust clean
6. Clean and check computer
set -monitor, CPU,
keyboards, mouse – free,
unnecessary markings,
dust; cables and plugs are
in order; well-arranged; all
items functional
7. Clean, inspect air
conditioning equipment:
• keep screen and filter
free from dust/rust
• Check selector knobs if
in normal positions and
are functional
• Check if drainage is OK
8. Clean, check and maintain
Tool Room
• Free of dust, not damp
• Tools in appropriate
positions/locations
• With visible
labels/signage
• Logbook and forms are
complete, in order and
updated
Trainers Date Developed: Document No. NTTA-TM1-07
• Lights, ventilation – OK
Methodology Level I July 2010 Issued by: Page 55 of 61
Date Revised:
10. Clean and check Rest
February 2012
Room Templates Developed by: NTTA
• Urinals, bowls, wash NTTA
basins, walls and Revision # 01
partitions are free from
stains, dirt, oils, graffiti
 Template #3
GMAW WORKSHOP HOUSEKEEPING SCHEDULE
DAILY TASK YES NO
Dispose segregated waste; clean garbage cans

Sweep floors; if wet, wipe dry

Wipe and clean whiteboards

Clean and arrange working tables

Clean and check mounting of machines/equipment

Before leaving, collect stubs and other welding wastes.

WEEKLY TASK YES NO

Clean posters, visual aids and update accomplishment/Progress Charts

Clean bulbs/lamps/ceilings/walls

Clean/Wash of windows/glasses/mirrors

Clean and check tools, machines, supplies, materials

Sanitize garbage receptacles

Empty water collector; clean body of Water Dispenser

MONTHLY TASK YES NO

Conduct inventory

Clean and arrange tool room

Inspect electrical system; clean cables, wires

Clean instructional materials & modules; arrange and put in order

Inspect and clean air-conditioning equipment filter; clean body

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 56 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Template #4
WELDING EQUIPMENT MAINTENANCE SCHEDULE*
8 HOURS 50 Hours 100 HOURS
•  •


Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 57 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Template #5
EQUIPMENT MAINTENANCE SCHEDULE
EQUIPMENT TYPE
EQUIPMENT CODE
LOCATION
Schedule for the Month of March
MANPOWER Daily Every Weekly Every Monthly Remarks
ACTIVITIES Other 15th
Day Day

1. Check panel board, and

circuit breakers’
electrical connections,
cables and outlets
 Clean and kept dry
 Parts are well-
secured/attached
 Properly labeled
2. Check Mig gun (nozzle,
contact tip, diffuser)
and ground cable:
 Clean and kept dry
 Parts are well-
secured/ attached
 Inspect for damages
and replace parts if
necessary
3. Check adjustment
lever’s if functional
(amperages/speed); if
not, calibrate

4. Check Gas cylinder

outfit for any
abnormality
 Gate valve
 Co2 regulator
 Gas hose Fittings
 Fittings
5. Check/Clean wire
feeder (rollers, wire
speed/spool
adjustment); remove
used oil, dust; keep
dry.

6. Run the equipment for

5 minutes and observe
for unusual noise or
abnormal operation; if
repair is necessary,
send to technician.

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 58 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Template #6

WORKSHOP INSPECTION CHECKLIST

Qualification
Area/Section In-Charge

YES NO INSPECTION ITEMS

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

Remarks:

Inspected by: Date:

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 59 of 61
Developed by: NTTA
Templates NTTA
Revision # 01
 Template #7
EQUIPMENT MAINTENANCE INSPECTION CHECKLIST
Equipment Type :
Property Code/Number :
Location :
YES NO INSPECTION ITEMS

Remarks:

Inspected by: Date:

Date Developed: Document No. NTTA-TM1-07

Trainers July 2010 Issued by:
Methodology Level I Date Revised:
February 2012 Page 60 of 61
Developed by: NTTA
Templates NTTA
Revision # 01