SAFETY DATA SHEET KAESER-SIGMA-Fluid
1907/2006/EC S-460
9.5409.0, 9.5409.00010,
9.5409.00020,
9.5409.00030,
9.5409.00040
OEL_D.DOT created by: Created on: 04.96 Modified: 21.11.2011
QEM Released by: QEM Page 1 of 5
1. Identity of substance, preparation, and supplying company
Product trade name: SIGMA S-460 Synthetic Air Compressor Fluid (Sigma
Lubricants S-460), 9.5409.0, 9.5409.00010, 9.5409.00020,
9.5409.00030, 9.5409.00040
Supplier: KAESER COMPRESSORS AUSTRALIA PTY. LTD.
45 Zenith Road
Melbourne/Victoria
Dandenong South 3175
Email: msds.au@kaeser.com
Technical information: (+61) 3-9791-5999
Emergency telephone number: (+61) 3-9791-5999 (08.30 – 05.00 pm on workdays)
Application: Cooling oil with corrosion inhibitor
2. Possible hazards/effects on health
Eye contact: May cause irritation.
Inhalation: Hydrocarbon mist may make breathing difficult.
Ingestion: May cause diarrhoea.
Skin contact: May irritate after prolonged contact.
3. Composition/information on ingredients
Chemical properties
PAO-based lubricant and additives
Components CAS number EINECS number Proportion in percent, remarks
Synthetic polyester 68515-49-1 5 – 10
Synthetic poly alpha olefin 68037-01-4 75 – 80
(PAO)
Hydrogenated ISO paraffin 64742-54-7 265-157-1 10 – 15, less than 3% DMSO
extractable components as per IP 346
Synthetic oxidation inhibitor 68921-45-9 0,5 – 1
Synthetic corrosion inhibitor 28015-99-8 0,5 – 1
Synthetic ashless EP additive 10254-57-6 1–5
Synthetic oxidation inhibitor 41484-35-9 0,5 - 1
This product contains no hazardous substances within the definition of OSHA regulation 29 CFR
1910.1200.
4. First-aid measures
Eye contact:
Rinse open eyes thoroughly for a few minutes under running water. Seek medical help if irritation persists.
Inhalation:
Clear air passages of oil mist. Seek medical help if respiration difficulty continues.
Ingestion:
Wash out the mouth immediately. Do not induce vomiting. Obtain medical attention.
MSDS-Sigma Fluid S-460-AUS.doc
SAFETY DATA SHEET KAESER-SIGMA-Fluid
1907/2006/EC S-460
9.5409.0, 9.5409.00010,
9.5409.00020,
9.5409.00030,
9.5409.00040
OEL_D.DOT created by: Created on: 04.96 Modified: 21.11.2011
QEM Released by: QEM Page 2 of 5
Skin contact:
Wash thoroughly with skin cleaner, then with soap and water. Contaminated clothing should be dry-cleaned
before reuse.
5. Fire-fighting measures
Suitable extinguishing media:
Foam, powder, carbon dioxide, sand, earth and water mist.
Unsuitable or unsafe extinguishing media:
Powerful water jet.
Special protective equipment for firefighting:
Self-contained breathing apparatus.
6. Accidental release measures
Personal precautions
Wear protective gloves and clothing.
Environment protection measures:
Prevent escape and entry into the sewage or surface water systems.
Escaped fluid:
Use sand, earth or an absorption substance to dam or soak-up the spillage. Prevent escape and entry into
the sewage or surface water systems. Large volumes may be pumped.
7. Handling and storage
Handling:
Notes on safe handling:
No special handling precautions necessary.
Storage:
Storage room and container requirements:
Avoid sunlight and direct heat sources.
8. Exposure control and personal protection
ACGIH TLV (max. concentration at place of work (threshold limit value) according to American Conference
of Governmental Industrial Hygienists) 10 mg/m³ as mist.
Chemical name OSHA PEL in mg/m³ ACGIH TLV in mg/m³ Supplier OEL
Hydrogenated ISO paraffin TWA 5 5 not listed
Hydrogenated ISO paraffin STEL not listed 10 not listed
Respiratory protection:
Not needed under normal conditions of use. If oil mist cannot be controlled, use a respirator fitted with a
filter for organic vapours and a particulate filter.
Hand protection:
Extra-sensitive persons should use oil-proof working gloves.
MSDS-Sigma Fluid S-460-AUS.doc
SAFETY DATA SHEET KAESER-SIGMA-Fluid
1907/2006/EC S-460
9.5409.0, 9.5409.00010,
9.5409.00020,
9.5409.00030,
9.5409.00040
OEL_D.DOT created by: Created on: 04.96 Modified: 21.11.2011
QEM Released by: QEM Page 3 of 5
Eye protection:
Wear safety glasses if splashing could occur.
Body protection:
Protective overalls
9. Physical and chemical properties
Physical properties
Form: Liquid
Colour: gold/yellow
Odour: mild hydrocarbons
Safety-relevant data:
pH value: neutral
Boiling point > 371° C (700 °F)
Pour point (DIN ISO 3016) < - 30 °C
Flash point (DIN ISO 2592) and method > 238° C (460 °F) COC
Autoignition temperature > 315° C (600 °F)
Evaporation rate (butyl acetate) negligible
Vapour pressure (20° C) < 0,01 kPa
Volatiles none
3
Density (15° C) (DIN 51 757 D) > 860 kg/m (> 0.86 g/cm³)
Flammability (ambient temperature) not flammable
Fire-provoking characteristics none
Solubility in water (20° C) insoluble
Vapour density greater than air
Kinetic viscosity (40° C) (DIN 51 562, T.1) 41.4-50.6 mm2/s (cSt)
Kinetic viscosity (100° C) (DIN 51 562, T.1) 7.3-50.6 mm2/s (cSt)
10. Stability and reactivity
Stability:
Stable under normal conditions. No photo-reactive agents.
Conditions to avoid:
Powerful source of ignition and extreme temperatures.
Substances to avoid:
Strong organic and inorganic acids and oxidising agents.
Hazardous decomposition products:
Burning generates smoke, soot, hydrocarbons, CO, CO2, sulphur and nitrogen oxides. Residue mainly
comprises soot and mineral oxides.
MSDS-Sigma Fluid S-460-AUS.doc
SAFETY DATA SHEET KAESER-SIGMA-Fluid
1907/2006/EC S-460
9.5409.0, 9.5409.00010,
9.5409.00020,
9.5409.00030,
9.5409.00040
OEL_D.DOT created by: Created on: 04.96 Modified: 21.11.2011
QEM Released by: QEM Page 4 of 5
11. Toxicological information
Acute toxicity:
Oral LD50: > 2000 mg/kg
Extrapolated from component data
Inhalation LC50: not applicable
Skin effects: very mild
Chronic toxicity: none known
Subchronic toxicity: none known
Carcinogenicity:
IARC: no
NTP: no
OSHA: no
Sensitization: not known
12. Ecological information
Mobility
Should the fluid escape to the environment, it will be adsorbed by sediment and soil.
Behaviour:
Relatively good behaviour. No bio-accumulating potential.
Environmental pollution:
Because of its relative density and the liquid aggregate state of the product it either floats or spreads out on
water, a state that results in a harmless form of contamination. It is not assumed that the product is
damaging to organisms in water and on land.
13. Disposal considerations
Product:
Recommendation: Hand over to an authorised disposal contractor.
Waste disposal code as per AVV (German Waste List Regulation):
130206* synthetic machine, gear, and lubricating oils.
Contaminated packaging:
Recommendation: Empty containers completely. Hand over to a licensed disposal contractor.
Recommended cleaning agent: Cleaning by recycler.
14. Transport Information
Not dangerous for conveyance under UN, IMO/IMDG, ADR/RID and IATA/ICAO codes.
15. Regulatory information
Marking according to EC directives: NOT SUBJECT TO MARKING OBLIGATION
S-phrases: S 3: Keep in a cool place, S16: Keep away from sources of ignition - No smoking.
Special marking and specific preparations:
(as per Annex II of the Dangerous Preparations Directive 88/379/EWG): not listed.
MSDS-Sigma Fluid S-460-AUS.doc
SAFETY DATA SHEET KAESER-SIGMA-Fluid
1907/2006/EC S-460
9.5409.0, 9.5409.00010,
9.5409.00020,
9.5409.00030,
9.5409.00040
OEL_D.DOT created by: Created on: 04.96 Modified: 21.11.2011
QEM Released by: QEM Page 5 of 5
National regulations
Notes on use limitations: no limitations
Industrial accident ordinance: not named in Annex II.
Classification according to German work safety regulations: not classified
Technical Instructions on Air Quality: Class 3 (organic)
Water hazard class: WGK 1 (self declared)
16 Other Information
Further information:
Concawe Report 5/87, Health Aspects of Lubricants; DGMK report 400-7
Safety data sheet directive: Regulation 1907/2006/EC (REACh).
The information in this safety data sheet is based on current knowledge and experience and is intended to
describe the product for the purposes of health, safety and environmental requirements only. It should not,
therefore, be construed as a guarantee of any specific property of the product.
MSDS-Sigma Fluid S-460-AUS.doc
