Resume

Mr. Pratik T. Patil. (B. E. Electrical) Mobile:9762968162

Email : - pratikp1789@gmail.com

Total Experience: 6.5 Years of work experience in Electrical Design, Automation & Maintenance.

Job Objective

To be a successful team leader in a progressive organisation that offers opportunities, this will allow
me to utilize the skills with a good potential for a professional growth & further learning.

Summary

Design & Automation of Electrical Systems

 Designing of Control System for Electrical Control & Switchgear Application.

 Selection of Switchgears, Protective Equipment’s, Controllers, Field Instruments, Sensors & Relays.
 Atomize systems with different control component & PLC ladder logic if required.
(Completed professional programming course of Allen Bradley & SIEMENS PLC)
 SCADA application if necessary.
 Designing of electrical systems: - Industrial panels (Control/Power Circuit & GA drawing for Cabinet),
Shop Drawings & site plan.
 Single Line Diagram using AutoCAD 2D.

Project & Costing

 Evaluation of most effective idea & method to execute project.

 Selection of Contractors, Material & supplier.
 An effective communicator with exceptional analytical, price negotiation, relationship management and
problem solving skills with ability of solving critical problem areas.
 Project Planning with Layout & Costing of Investment, Payback period & total benefit for project
proposals.
 Installation & Commissioning of new machine within specified time limit.
 Planning & execution of FAT & SAT activities.
 Holding Electrical Supervisor Licence of PWD Maharashtra.

Maintenance

 Experience in the areas of machine & utility maintenance. (Routine, Preventive & Breakdown
Maintenance). Standardization & periodic calibration of Engineering Instruments.
 Familiar with Hydraulic & Pneumatic Systems.
 Procurement for Electrical, Mechanical Spares and Consumables for maintenance.
 Preparing Audit related documents, Electrical Inspection as well as good knowledge of cGMP.
 Audit faced like WHO, TGA, EMS, Electrical Safety Audit.
 TPM, 5S, KEIZEN, MTTR, MTBF for process improvement.

Professional Experience: - (In chronologically reverse order)

 Thyssenkrupp Elevator India Ltd. (May-19 to Present) Designation: - Senior Design Engg.

 Designing Electrical wiring diagrams for Elevator (Residential & Commercial projects).
 Preparing wiring harnesses for typical family of elevator.
 Selection of control components as per control philosophy.
 Selection of field & safety devices for more reliable operation.

 Larsen & Toubro Ltd. (3rd Party Payroll) May-18 to Apr-19. Designation: - Senior Design Engg.

 Design of MCC, PCC, AHU & VFD Drive Panels & Quote the value as per inquiry of the client and
considering techno-commercial aspect as well.
 Selection of the suitable ratings of switchgear components & other components for panels.
 Selection & Measurement of the suitable ratings of Cable Sizes for Motors as per KW Ratings.
 Preparing bill of material, planning and adhering to time schedules.
 Designing of General Arrangement (GA), Single Line Diagram (SLD) & Power and control Wiring Diagram
(WD) for Panels.
 Submission of Drawings to Client & getting approval for manufacturing.
 Technical Discussion with Client & intra office for smooth flow of manufacturing.
 Overall responsibility in project execution.

 Honeywell Automation Ltd. (3rd Party Payroll.) Apr-16 to Apr-18. Designation- Senior Design Engg.

 Designed different Control System for HVAC like Hot Water System, Chilled Water System, Direct
Expansion & Electrical Heating.
 Preparation of detailed Wiring Diagrams/ Electrical interlock wiring drawings.
 Customized sequence of operation to suit software programming.
 Designing of VFD & Starter wiring interlocks as per sequence of operation.
 Understanding the inputs provided and deriving scope of a project based on the inputs.
 Created System Architectures Riser Diagram, Controller wiring, Plant Layout, GA drawing for Cabinet and
other Engineering Drawings, Bill of Material for client approvals.
 Detail Engineering of Hardware for HVAC systems involving: Interpreting the Functional requirement by
reading Tender & Mechanical Drawings, deriving the I/O count for systems.

 ACK System Integrator, Pune. Dec-13 to Apr-16. Designation- Design Engg

 Designing of electrical systems using AutoCAD: - Industrial panels (Control/Power Circuit & GA drawing
for Cabinet).
 Review of System configuration, Control Philosophy & Preparation of BOM.
 Preparation of SLD, Riser diagrams & GA drawings using AutoCAD.
 Selection of cables, switch gears & control Component.
 Electrical load distribution, cable schedule & tray routing.
 Hands on experience in handling LT PANEL like MCC, PCC, ACB, SPM and PLC Based Control Panels.
 Installation & commissioning of control panels at site location.
 Electrical Drawings for MSEB Approval: - Site Plan, Earthing schedule, Section drawings.
 Designing of Shop drawings, External service layout & As Built drawings in Turnkey Projects.

 Meditab Specialties, Satara (CIPLA Pvt. Ltd.) Nov-12 to Nov-13. Designation- Trainee Engg.

 Prepared P.M. Schedule & implementation, Check list, Machine’s History Cards & Maintained other
documents like MTTR, MTBF.
 Maintained Building Monitoring System like CCTV, Access Control & Fire Fighting System.
 Energy calculations to improve performance of machineries & to reduce losses: - Machine wise,
Department wise on daily, monthly & yearly basis.
 Maintenance cost analysis- Inventory, spares, capital, labour & utility cost against total sale.
 Implementing Safety and 5S for reducing Accident / break down & damages of equipments.
 Manpower Handling, Training & Development of workers.

Preventive & Brake-down maintenance of followings: -

 Air Handling Unit, Air conditioner, Chillers & Cooling tower

 Manufacturing Vessels, Pharma Incubators
 Special Purpose Machineries
 Single phase & three Phase A.C. Motors, D.C. Motors, VFDs. & Mechanical Drive
 Familiar with Server & Inter-Telecommunication System

Utilities Handled: -

 H.T. Yard (22KV), Transformer (Patson-750KVA)

 D.G. Set (Cummins.) (350/125 KVA), AMF Panel
 Steam Boiler ( Thermax- 600/400/100 Kg)
 Compressors ( Ingersoll Rand- 20 &70 Bar, BAUER- 200 Bar, Atlas Copco-10 Bar)
 U.P.S. system (20/10KVA), Batteries
 APFC Panel, MCC / PCC / PDB / LDB
Projects: -
 Somerset County, Bridgewater, New Jersey: - Designing of AHU’s for different.
 Neutrogena Corporation, LA, Canada: - Designing of AHU for Pharma process.
 Janssen Ortho LLC, Gurabo, Puerto Rico: - Designing of Hot & Chilled Water.
 Mercuras Water Treatment Pvt. Ltd. Pune: - PLC Logic Panel.
 Cost Saving By Reducing Inventory Cost: - Achievement- Cost reduced by approximate. 20%
 Energy Saving By Using LED Fixture Factory Premises: - Achievement- Total Energy saving 55%.

PLC Programming: -
 Allen Bradley Software: - Micrologix 500 Hardware: - SLC 5/03
 SIEMENS Software: - Simatic Manager Hardware: - S7-300/400
 SCADA Software: - InTouch

Professional Qualification: -
 B.E. Electrical – S.N.D. College of Engg. Nasik. (Pune University) in 2012 with 1st Class
 Diploma Electrical - Walchand College of Engg. Sangli. (MSBTE) in 2009 with 1st Class
 H.S.C. – K.M.R.Bk. in 2007 (Tech. sub. Elect. Maint. ) with 1st Class
 S.S.C. – C.S.V.S. R.Bk. in 2005 with 1st Class

Software Proficiency: -
 Graphics Tools- AutoCAD 2014 (2D & 3D)
 ExACT - Expertise Automated CAD Tool
 PLC Ladder Logic. (AB & Siemens)
 SCADA (InTouch)
 Microsoft Visio 2013
 ERP System

Training:-
 Two month industrial training at Krishna Sugar Factory Rethare Bk. Karad. (Production Process)
 Academic Training on Industrial automation at Yogini Systems, Pune
 Leadership & Supervisory Skill Development training
 Industrial Safety Training

Strengths:-
 Good leadership quality & Sense of Responsibility
 Highly motivated and enthusiastic, capable of working on own initiative
 Good interpersonal and communication skills
 Excellent grasping capability and understanding the concepts clearly

Professional References:-
 Mr. Atul Mohkhedkar (HOD Project & Maint. Dept) - SECO India Pvt. Ltd. Pune. Mob:- 9922954857
 Mr. Mahesh Agate (HOD Maint. Dept) – Meditab Specialities Pvt. Ltd. Satara. Mob:- 9850903228

Personal Profile:-
Name : Mr. Pratik Tanaji Patil
Date of Birth : 14th Sept 1990
Present Address : Sane Chowk, Chikhali Akurdi Road, PCMC, Pune
Permanent Address : A/P: -Malakapur, Tal: - Karad, Dist: - Satara
Contact No. : 9762968162
E-Mail Address : pratiktp1789@gmail.com
Passport/Validity : Yes/ Dec-2026
Gender : Male
Marital Status : Married
Language Proficiency : English, Hindi and Marathi

Declaration:-
I hereby declare that all the information provided above is true to my knowledge
Date: - Yours faithfully,

Mr. Pratik T. Patil.