Handbook
for
Motorola
MC-
MC-Micro Series
MC-
MC-Micro
MC-
MC-Micro TRC
MC-
MC-Micro MPT1237
MC-
MC-Compact
MC-
MC-Centro
Radius M110
Storno 5500
Field Programmer
Created by
Servicetools.org
This are Scans from PX4 Handbook, but PC Software is most identicel.
Non interest sites are removed or changed.
Changed for PC Software
3. Installation:
First: The ansi.sys must be installed in Config.sys , all software runs only from pure DOS.
Copy ansi.sys to c:\
Edit Config.sys and ad this on the end: device=c:\ansi.sys *** Restart PC !!! ***
Ansi.sys useally in DOS folder, when not, just search in google for this.
Copy MC-Micro soft in your desiried folder.
Run Motorola.com / Storno.com and select the right Modul:
Modul: For Model: Remarks:
mcev9.chn MC-Micro EVA 9, Select 5 Standardversion
mcev9r.chn MC-Micro EVA 9, Select 5 Repairversion ( Create new EEPROM )
mcev9m.chn MC-Micro EVA 9, Select 5 Masterversion ( Few more Options )
mcez9.chn MC-Micro EZA 9, Select 5 Standardversion
mcez9r.chn MC-Micro EZA 9, Select 5 Repairversion ( Create new EEPROM )
mcez9m.chn MC-Micro EZA 9, Select 5 Masterversion ( Few more Options )
mcez13.chn MC-Micro EZA 1/3, CSQ/PL Standardversion
mcez13r.chn MC-Micro EZA 1/3, CSQ/PL Repairversion ( Create new EEPROM )
mcez13m.chn MC-Micro EZA 1/3, CSQ/PL Masterversion ( Few more Options )
mcevm13.chn MC-Micro TRC, MC-Compact Standardversion
mcevm13m.chn MC-Micro TRC, MC-Compact Masterversion ( Few more Options )
mccentr.chn MC-Centro Standardversion
mccentrm.chn MC-Centro Masterversion ( Few more Options )
cqmev9.chn CQM5500 EVA 9, Select 5 Storno Version
cqmez9.chn CQM5500 EZA 9, Select 5 Storno Version
cqmez13.chn CQM5500 EZA 1/3, CSQ/OL Storno Version
The software is from 1985, you need a old PC
386SX or lower without FIFO RS232 Port or
you can use the DOS Box Emulater
The MC-Micro MPT1237 ( Bündelfunk ) use own soft, but I don‘t know which one !
The Radius M110 use a own soft, much more comfortable like the GP300 or MX100 software.
The Copyright on the Original Manual is by Motorola !
This Copy is only for education or non profit using for Radio Amatuers.
All Programming Software are under Copyright from Motorola !!!
Repair Vesion has Initialization Menu here as 4. Point
In PC Software press Control - C to return to
Loader Menu.
For return to DOS press F10
Make sure you have transfered all Data to Radio
The Soft don‘t store it !
Removed, is not availble in PC Software
If still not work, use Repair Versions Initialization Menu to create new corect EEPROM Data
and try to write it to Radio, if still not work, replace EEPROM by 24C01.
Warning !!! , faster PC as 386SX can gets this Error too, first try slower PC.
