Catalog KT0915

Supersedes
Catalog No. KT0315
 About Ken-Tool
Ken-Tool is the leading manufacturer of tire service tools in the
world. Headquartered in Akron, Ohio, Ken-Tool has been providing
the tire industry and automotive aftermarket with quality products
for over 95 years.
A lot of change has occurred within Ken-Tool over the years. But
its long-time tag-line, "Wherever Tires Are Changed", has held true.
Ken-Tool's brand name and reputation remain the best in the tire-
service industry, and it is the passion of the company's leaders to
make sure that continues to be true in the years ahead.
Housed in a 70,000 square foot facility, Ken-Tool is a primary
manufacturer of hand-tool products, with its manufacturing
expertise centered on drop hammer, up-setter and press forgings.
The company goes to market through the traditional aftermarket
distribution network.

Ken-Tool is proud to announce that they were certified on December 9, 2014 with
the current ISO 9001:2008 standards for quality management systems. ISO is the
world’s most widely used quality assurance procedural guidelines, and lays the
groundwork for an organization’s development of a uniform set of procedures to
establish, monitor and ultimately control product or service quality.

Throughout this catalog watch for YouTube symbols that indicate one or
more videos are available for the product you are reviewing. Then go to
www.youtube.com/kentoolvideomedia to find a selection of videos for our
products. You can also scan the barcode with your Smartphone to get a link
to our YouTube videos or details on how to Contact Us at Ken-Tool.

768 E. North St., Akron, Ohio 44305 • Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
Visit our web site at: www.kentool.com

1 WARNING: Always wear safety goggles when using hand tools

New Products Heavy-Duty Wheel Stud Removers ......................................................44
reCore® TPMS Sensor Saver System ........................................................3 Impact Extensions ..............................................................................43
Deluxe Blue Cobra ® Truck Tire Service Set ..........................................4, 15 Socket Sets............................................................39, 40, 41, 42, 43, 44
Shark FinTM Dual Wheel Separation Bag ....................................................5 Twist Sockets ................................................................................41, 42
TPMS Stem Repair Kit ..............................................................................6 Wheel Lock Remover ..........................................................................44
8-IN-1 Wrench ..........................................................................................7 Specialty Sockets, Torque Sticks & Extensions ............39, 40, 41, 42, 43, 44
ValveCapper ® Pro ......................................................................................8 Spring Compressor, McPherson Strut ....................................................46
17.5" SidewinderTM Kit ..............................................................................9 Strap Winder ..........................................................................................29
Metric Valve Breaker ..........................................................................10, 20 Super Single Axle Drain Pan ....................................................................12
Mega Air Blast® Bead Seater....................................................................11 Tire & Wheel Service Center ..............................................................33, 34
Pro Super Single Axle Drain Pan..............................................................12 Tire Tool & Lug Wrench Merchandisers ............................................33, 34
Heavy Duty Universal Wheel Weight Hammer ........................................13 Tire Changing Stand ................................................................................36
Automotive Wheel Weight Hammer ........................................................13 Tire Inflation Cages ................................................................................ 35
Dual Wheel Separator ..............................................................................14 EZ Tire Rotator TM ....................................................................................36
Magnum EZ Tire Rotator TM with Ramp ....................................................36
Bendix ® Air Disc Brake Tools ....................................................48 Tire Irons (Mount/Demount)
Tappet & Boot Replacement Tool Kit ..............................................................48 Blue Cobra® Truck Tire Demount Tool & Sets ..................................4, 15
Guide Pin / Pin Boot Service Tool Kit..............................................................48 European Style ....................................................................................20
Ken-Tool® Heavy-Duty Truck ................................................................................16
Aligning Bars ..........................................................................................47 Motorcycle/Small Wheel .................................................................... 20
Aluminum Wheel Protector............................................4, 9, 15, 17, 18, 22 Nineteen-Five TM Tire Mount/Demount Set .......................................... 15
Ball Joint Separator ................................................................................46 Serpent™ Mount & Demount Tools ....................................................17
Bead Breakers Super Serpent™ Mount & Demount Tools ..........................................18
ATV ......................................................................................................26 Tire Snakes® ...................................................................................... 26
Driving Iron ........................................................................................23 Tubeless ........................................................................................15, 16
Floor Type ............................................................................................23 Tire Knockers ......................................................................................47
Impact ................................................................................................23 Tire Mount/Demount Lubricant..........................................................15, 27
Portable .............................................................................................. 23 Tire Spoons
Truck/Farm/OTR.................................................................................. 23 Curved ..........................................................................................19, 20
Wedges................................................................................................24 Curved w/Flat Tip ..........................................................................19, 20
Bead Expanders, Pneumatic ....................................................................28 Drop-Center ..................................................................................19, 20
Bead Holders Heavy-Duty Double-End Spoons....................................................15, 19
Aluminum Bead Holders ................................................................15, 22 Straight ........................................................................................ 19, 20
Bead Holder for 19.5" Aluminum Wheels ......................................15, 22 Tire Spreaders ........................................................................................28
Brass Bead Holding Device ..............................................15, 17, 18, 22 Torque Master ® Torque Sticks & Extensions ....................................43, 44
Bead Seaters......................................................................................26, 28 TPMS Sets
C-Clamps ................................................................................................38 reCore ® TPMS Sensor Saver System ....................................................3
Chrome Lug Nut Cover Remover ............................................................ 29 TPMS Sensor Hardware Service Set....................................................45
Easy-Lift™ Bead Seating Stand................................................................36 Truck Wrench Handle
Front End Tools Leverage Bar ......................................................................................32
Ball Joint Separator ............................................................................46 Valve Breaker TM ..................................................................................10, 24
Heavy Duty Tie Rod End Tool ..............................................................46 ValveCapper® Pro Cap & Core tool ............................................................8
Impact Separator Tool ........................................................................46 Valve Repair Tools .................................................................................. 28
McPherson Strut Spring Compressor..................................................46 Vises
Pitman Arm Wedge..............................................................................46 Pro Reversible Mechanic’s Vises ........................................................38
Shock Link/Tie Rod Separator ............................................................46 Pro Mechanic’s Vises ..........................................................................38
Universal Tie Rod Adjusting Tool ........................................................46 Wedges
Hammers Bead Breaking......................................................................................24
Cross-Pein/Blacksmith........................................................................ 47 Wheel Balancer ........................................................................................28
Dead Blow .......................................................................................... 47 Wheel Cover Puller/Replacer ..................................................................29
Epoxy Kits............................................................................................25 Wheel Lock Remover ..............................................................................44
General Purpose ..................................................................................25 Wheel Lock Remover Kit ........................................................................41
Heavy-Duty ..........................................................................................25 Wheel Weight Tools .............................................................................. 28
New England Hand Drilling ..................................................................47 Wire Brush ..............................................................................................28
Replacement Rubber Heads ................................................................25 Wrenches
Rubber Mallet ......................................................................................47 4-Way Lug Wrenches
Sledge..................................................................................................47 Folding..............................................................................................41
Handles Heavy-Duty Truck ............................................................................30
Aluminum, Fiberglass, Wood ..............................................................25 Light Truck/SUV..........................................................................30, 31
Impact Separator Tool ............................................................................46 OTR ..................................................................................................30
Industrial Lock-Ring Tools ......................................................................21 Passenger Car ............................................................................30, 31
IronManTM Ergonomic Wheel Lifting Bar..................................................22 Telescoping...................................................................................... 31
Leak Locator ............................................................................................27 Cap Nut
Leverage Bar......................................................................................23, 32 Combination ....................................................................................29
Lock Ring Tools ......................................................................................21 Heavy-Duty ......................................................................................29
Lubricant Ken-Tool Porkchop™ ...................................................................... 29
Swab / Brush ......................................................................................27 Double-End Truck ................................................................................32
Tire & Bead Lubricants ..................................................................15, 27 Power Wrench ......................................................................................31
Manual Tire Changers for Small Tires......................................................26 Extra Leverage 1-1/2" Lug Nut Wrench ................................................32
OSHA Tire Service Charts ........................................................................27 Wrench Support Stand ............................................................................32
Pro Super Hub-Shark ® (7326) ................................................................37 Pro Super Hub-Shark® (7326) ............................................37
Rim Guard ..............................................................................................32
Sockets NEW Look for this symbol beside individual product
listings for exciting new tools from Ken Tool.
Budd Nut removers..............................................................................44
Dual Wheel Stud Remover ..................................................................44 Top Seller Look for this symbol beside individual product
Flip Sockets ............................................................................42, 43, 44 listings to indicate top selling products.
Heavy-Duty Impact sockets ................................................................44 All weights and measures are nominal. Variations in manufacture may occur.

For more information visit us at www.kentool.com 2

Introducing the NOW YOU CAN
REPAIR TPMS
SENSORS
WITHOUT EVEN
TPMS Sensor Saver System
TAKING THE
TIRES OFF
THE VEHICLE. PATENTED

Most TPMS sensor failures are caused by galvanic corrosion of the

valve core and stem. This sounds like an easy fix — but until now,
service techs could not, in most cases, replace the valve stem
without replacing the entire sensor module, rebalancing the
wheel, and resetting the TPMS sensor. Proven reliable in thou-
sands of miles of real-world, all-season testing, the Ken-Tool
reCore Sensor Saver System changes all that.
SIMPLE. The Ken-Tool reCore kit provides everything you need to drill
out the corroded valve core, tap new threads, and install a new, cor-
rosion-proof valve core and stem. No need to have the TPMS com-
puter re-learn the module. No need to even remove the tire or wheel
from the vehicle!
FAST. With a little skill, a tech can install a new valve stem in 10-15
minutes. Compare this to the time it takes to order a replacement
TPMS module, install it, and reset the vehicle’s TPMS system. And
that’s not to mention the cost savings you can pass on to the
Galvanic corrosion customer!
causes TPMS failures. PROFITABLE. The Ken-Tool reCore TPMS Sensor Saver Kit will not
only pay for itself after a few uses — it will provide you with great
profit margins. And, since there are more than 200 million TPMS sen-
sors on the road today, it opens the door to a high-potential
market. The initial investment: just $199 (suggested price)!

12-Piece If Your Per-Sensor Repair Fee Is:

Introducing the Starter Kit #29980 $39 $49 $59
Kit Cost $199 $199 $199
Revenue $468 $588 $708
Per kit Profit $269 $389 $509
Profit per Sensor $22.42 $32.42 $42.42
TPMS Sensor Saver System
Your Profit % Is 57% 66% 72%
Ken-Tool’s Patented reCore Starter Kit (#29980) includes everything you need
to service your TPMS Sensor replacement customers: 12 TPMS Sensor Savers,
TPMS Valve Core Torque Tool (preset at 4-in-lbs), High Speed Dual
Cutter Countersink Drill Bit, Tap, Tap Holder with T-handle, Bottle Ken-Lok™
Thread Sealant, Easy to follow instructions, Blow-molded plastic storage case. 29980

25-Piece If Your Per-Sensor Repair Fee Is: PATENTED

Introducing the Refill Kit #29981 $39 $49 $59
Refill Set Cost $199 $199 $199
Revenue $975 $1225 $1475
Per Set Profit $776 $1026 $1276
Profit per Sensor $31.04 $41.04 $51.04
TPMS Sensor Saver Refill Kit
Your Profit % Is 80% 84% 87%
Ken-Tool’s Patented reCore Refill Kit (#29981) includes 25 TPMS Sensor Savers
plus a fresh Tap.

Item No. Description Weight For product

TM
demo visit
29980 reCore TPMS Sensor Saver System 5 lbs (2.3 kg) Kentool.com/recore
29981 reCoreTM TPMS Sensor Saver Refill Kit .5 lbs (.2 kg) or scan the QR code
with your mobile device. 29981
KT092012 RLT

3 For a FREE reCore System training DVD, email us at reCoreDVD@kentool.com. Top Seller
 NEW
®

DELUXE BLUE COBRA

TRUCK TIRE SERVICE SET
All the tools you need for changing most 22.5" & 24.5"
tubeless truck tires in one convenient set!
WATCH OUR VIDEO ON
www.kentool.com
TO SEE 4 TRUCK TIRES
DEMOUNTED IN ABOUT A MINUTE!

Set No. 35444 Weight: 57 Lbs (26 kg).

10 Pc. Set Includes:
Item No. Description Length Quantity
35440 Blue Cobra® Truck Tire Demount Tool; Demounts up to 425 Wide Tire 54" (137 cm) 1
34645 T45A Tubeless Tire Iron - Our Best Selling Bar! 37" (94 cm) 1
33052 Double-End Tire Spoon 30" (76 cm) 1
35330 T11ES Bead Breaking Wedge w/Safety Handle, Use with T35 Hammer 30" (76 cm) 1
35323 T35 H.D. Tire Hammer, With Replaceable Rubber Head 16.5" (42 cm) 1
35848 8 lb. Bucket Euro Paste Lube; Dries Tacky With Rust Preventative 1
30512 Euro-Style Lube Applicator Brush 11" (28 cm) 1
31713 Aluminum C-Lok™ Bead Holder 5.5" (14 cm) 2
31810 Leather Rim Protector - PATENTED! 6" (15 cm) 1
35444 set ships in 1 Box, weighing 57 lbs, UPS shippable

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT073014EB

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345

E-mail: sales@kentool.com • www.kentool.com 4
 NEW

TM

Dual Wheel
Separation Bag
The first wheel
separation solution
34555
for steel, aluminum
and chrome wheels!
No metal on metal contact!
• 5000 lbs of static pressing force!
Simply turn
• Works on 15" to 24.5" dual and single
valve cap
wheels and tires on trucks & trailers
to deflate
• Kevlar inner inflation bag is industrial
grade and nearly puncture proof
2.5 tons of force! • Small but mighty – Portable, durable,
and fast – Full inflation only takes a
matter of seconds
• 3 foot inflation hose makes access
easy and safe
• Deflation is controlled with a quick
turn of the slotted valve cap
• 9.75" x 8" x 3/8" height deflated –
5.5" height when fully inflated
• 90 psi max pushing pressure –
150 psi maximum rated pressure
Item No. Description Weight
NEW 34555 Shark FinTM 1.31 lbs (.59 kg)
Dual Wheel Separation Bag

Shark FinTM inflates to separate stuck or frozen WATCH THE SHARK FINTM VIDEO ON
www.kentool.com
dual wheels without damaging the wheel!

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT092815

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
5 E-mail: sales@kentool.com • www.kentool.com
 NEW

TPMS STEM REPAIR KIT

Easily repair damaged aluminum TPMS valve stems!
Patented repair solution now available to the consumer!
Repairs
damaged valve
stems like these:

TPMS Sensor Saver System

Available to the professional,

now made for DIY!
• Each kit includes: 2 replacement
stems, custom high-speed drill bit,
tap and tap holder, thread locker,
and a valve core torque tool
• Patented – this proven repair
solution has been in the market
since 2012 with millions of miles
on repaired stems
• Stems are damaged by corrosion
from weather, steel valve caps,
and improper valve cores
• Consumers can “save” their TPMS
sensors with this simple and
economical repair kit – Without
having to remove the wheel or
demount the tire
• Repair 2 sensors for less than the
cost of one replacement TPMS unit
• Easy to use and very fast – Repairs
can be completed in 20 minutes
• The only additional tools needed are
a high speed drill, needle nose pliers,
and eye protection
Item No. Description Weight
NEW 29975 7 Pc. reCore® TPMS Stem Repair Kit .55 lbs(.25kg) TPMS Stem Repair Kit #29975

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT021915EB

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345

E-mail: sales@kentool.com • www.kentool.com 6
 NEW

8-IN-1 WRENCH
SAE OR METRIC
Eight of the most popular wrench sizes
in one strong, professional,
compact and convenient tool!
• Designed by a professional auto technician for
versatility, convenience and strength!
• Wrench engagement requires minimal clearance
around the fastener!
• “Stud-Thru” design allows long threaded studs
and fasteners to pass through the wrench opening!
• “12 Point” design requires only 30 degree swing
arc re-engagement for close proximity work!
• Backed with Limited Lifetime Warranty
• 7-1/2" slim profile that is easy to carry and store
• SAE sizes: 5/16", 3/8", 7/16", 1/2", 9/16",
5/8", 11/16", 3/4"
• Metric sizes: 10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm, 17mm
Exceptional “Must Have” convenience tool
for multiple markets:
• Automotive, maintenance, farm equipment,
DIY, home projects, sporting/recreational,
all engine repair, electrical, plumbing, HVAC,
bikes, motorcycles, furniture assembly
• Sold in a convenient 6 piece merchandising
display, 5" W x 6" D x 8" H
• Meets 150% ANSI specifications

PATENTED
35775 SAE
Item No. Description Weight
NEW 35775 SAE 8-IN-1 Wrench* .55 lbs (.25 kg)
NEW 35776 METRIC 8-IN-1 Wrench* .55 lbs (.25 kg)
35776 METRIC *Standard Pack of 6 - Shipped in Countertop Display

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT060915RT

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
7 E-mail: sales@kentool.com • www.kentool.com
NEW

VALVECAPPER PRO
®

4 TOOLS IN 1
Cap and Core Remover/Installer

Makes it easier to check

the inside dual tire!
• Designed by a trucker to
make a difficult job easier
• No more moving your rig to
position valve stems just
to get to the caps
• No more dropped caps —
holds onto caps and valve cores for removing and replacing
• Longer valve cap grip works on flow-through, double
seal valve caps
• At 11-3/4 inches it has enough reach to get the job done
• Unbreakable under normal use
• Designed for use on metal and plastic valve caps
BETTER THAN EVER!
• Patent pending design now
holds on to core for easy
removal and installation
• Shipped in convenient
25-piece counter display

29999
Item No. Description Weight
29999 ValveCapper ® Pro Cap & Core Tool 1.5 oz (.04kg)
29999M 25 Pc. ValveCapper ® Counter Display 3 lbs (1.4 kg)
Contains: 25 No. 29999 ValveCappers
1 Counter Display Unit Top Seller

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT102014

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345

E-mail: sales@kentool.com • www.kentool.com 8
 NEW

17.5" SIDEWINDER SET

TM
TM

Revolutionary new tire bar set designed for 17.5" tires!

The first tire tools designed exclusively

for 17.5" tires found on vehicle transporter
moving vans and high volume trailers.

35455 Demount Tool

17.5" SidewinderTM
Demo Video
#34549

35456 Gap Tool

31715 17.5" 31810 Leather
Bead Holder Rim Protector

35457 Mount Tool

• Patent-Pending revolutionary SIDEWINDER™ demount

bar demounts the tire from the wheel by pushing against Set No. 35459 Weight: 18.6 Lbs (8.43 kg).
the tire for leverage 5 Pc. Set Includes:
Item No. Description Length Quantity
• Innovative balanced aluminum bead holder specifically
NEW 31715 17.5" Bead Holder 9" (23 cm) 1
designed to stay in place when mounting the problematic
31810 Leather Rim Protector 6" (15 cm) 1
bottom bead on 17.5 tires
NEW 35455 Demount Tool 38" (96 cm) 1
• Unique Gap tool aids in demounting and makes certain NEW 35456 Gap Tool 32" (81 cm) 1
mounting and demounting is only a 1-man job NEW 35457 Mount Tool 38" (96 cm) 1
• Includes Ken-Tool’s Leather Rim Protector for working 35459 set ships in 1 Box, weighing 18.6 lbs, UPS shippable
with aluminum or chrome wheels

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT093015

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
9 E-mail: sales@kentool.com • www.kentool.com
 NEW
TM

METRIC VALVE BREAKER

Designed for use with aluminum wheels!
Quickly and easily removes
valve stems from wheels!
• Specially designed punch for use on 10mm valve stem
holes found on aluminum, alloy, and European wheels
• Removes nickel plated and steel valve stems
quickly and safely
• The 9mm punch is designed to fit through the
valve stem hole and remove the valve stem
— without making any contact with the wheel
• Made in USA from quality, high-grade steel
• Heat-treated punch for top performance
and long life
• Spring loaded punch decreases fatigue
and shock on the user’s hand
• Pinch-preventing Safety Grip with
vibration dampening tube grip
• Long-lasting baked powder
coat finish • Solid ram bar 35938
• Simple to rebuild — (not hollow pipe)
only 3 components drives more energy
into valve
PATENT 35934, 35936
PENDING 35934
35936
Item No. Model Description Length Weight
35938 35934 T34B Valve Breaker 27" (69 cm) 9 lbs (4.1 kg)
35936 T36B Valve Breaker 45" (114 cm) 16 lbs (7.2 kg) Valve Metric
NEW 35938 T38B Metric Valve Breaker 45" (114 cm) 16 lbs (7.2 kg) Breaker Valve Breaker
35935 3 Pc. Valve Breaker Repair Kit 1 lb (.5 kg) Repair Kit Repair Kit
NEW 35937 3 Pc. Metric Valve Breaker Repair Kit 1 lb (.5 kg) 35935 35937

Watch our video on www.kentool.com to see 4 truck tires demounted in about a minute!
KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT091514

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345

E-mail: sales@kentool.com • www.kentool.com 10
 NEW

BEAD SEATER

Bead Seating Tool

• Used on Auto, ATV, and Truck Tires
• Designed for use on tires up to 24-1/2
diameter
• ASME-UM certified 5-gallon tank
• Heavy-duty bar valve quickly releases
air between bead and rim
• Air pressure gauge and safety release
valve included for operator
31444 convenience and safety
RATED TO 165-PSI • Plastic nose clip protects chrome and
alloy wheels; replacements available
Outil de portée de talon Item No. Description Weight
• Utilisé sur les pneus d'automobiles, de véhicules 31444 Bead Seating Tool 33.1 lbs (15 kg)
tout-terrain et de camions with 5 Gallon Tank
• Conçu pour utilisation sur des pneus jusqu'à 24,5 pouces WATCH OUR VIDEOS ON
de diamètre www.kentool.com
• Réservoir 5 gallons (19 litres) certifié ASME-UM
• Une robuste valve à tige libère rapidement l'air entre le talon
et la jante
• Manomètre et soupape de sécurité inclus pour plus de commodité et de sécurité pour l'opérateur
• Un pince-nez en plastique protège les jantes alliage et chromées ; remplacements disponibl
Herramienta para calzado de talone
• Se utiliza en neumáticos de automóviles, vehículos todo terreno (ATV) y camiones
• Diseñada para utilizarse en neumáticos de hasta 24-1/2 de diámetro
• Tanque de 5 galones con certificación ASME-UM
• La válvula de barra de alta resistencia libera aire rápidamente entre el talón del neumático y la llanta
• Se incluye un manómetro de presión de aire y una válvula de descarga para comodidad y seguridad al operador
• La abrazadera plástica protege las ruedas de cromo y aleación. Hay repuestos disponibles
Top Seller

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT081010

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
11 E-mail: sales@kentool.com • www.kentool.com
 NEW

PROFESSIONAL
SUPER SINGLE AXLE DRAIN PAN
Securely catches oil and grease
Extended applications:
Fits most 10-hole Super Single
and Dual Disc Wheels.

• Lightweight molded plastic pan that locks

inside truck and trailer wheels to keep tire
and wheel clean
• Fits most steel and aluminum 22.5" and 24.5"
30600
10-hole hub — and stud-piloted tubeless wheels PATENT PENDING
• Allows 2 or 3-hole stud attachment to wheel
using finger-tightened lug nuts, will not tip
• 124 oz. capacity with self-draining shelves for
hub and axle nuts
• Made in USA from HDPE high density
polyethylene design — won’t warp if oil is warm
• Keeps wheels and tires clean when servicing
driven or non-driven axles, will not spill if bumped
• Flat bottom avoids spillage on workbench or floor
• Two built-in drip-proof drainage spouts for easy
waste disposal
• Captures all wheel end components — bearings,
seals and axle nuts
• Saves time — no more messy clean-up — no
more searching for awkward, makeshift containers
Item No. Description Weight
30600 Pro Super Single Axle Drain Pan 1.3 lbs (.6 kg)

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT052013-EB

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
E-mail: sales@kentool.com • www.kentool.com 12
 NEW

WHEEL WEIGHT HAMMERS

“The last wheel weight hammers you’ll ever need!”

No more
pinched fingers!

35359

35361

• Both hammers feature ANTI-MARRING

replaceable hammer face that is safe for use on STEEL, ALUMINUM, and CHROME
• Replaceable chromoly steel hook removes all clip on wheel weights — lead, zinc,
and steel — no modification needed to fit smaller weights
• Fiberglass handle with ergonomic industrial grip is chemical resistant and
4X STRONGER THAN WOOD
35355 - B232
• Both Hammers feature a dedicated refurbish kit to replace the hook and replace Standard Wheel Weight Tool
the anti-marring face — HD Refurb Kit: 35360 — Automotive Refurb Kit: 35362
Item No. Model Description Length Weight
35354 B230 Professional Wheel Weight Tool 10" (25.4 cm) 1 lb (.5 kg)
35355 B232 Standard Wheel Weight Tool 9.5" (24.1 cm) 1 lb (.5 kg)
NEW 35359 H.D. Universal Wheel Weight Hammer 12" (30.5 cm) 3 lbs (1.4 kg) 35354 - B230
NEW 35361 Automotive Wheel Weight Hammer 11" (28 cm) 1 lb (.5 kg) Pro Wheel Weight Tool

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT101514

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
13 E-mail: sales@kentool.com • www.kentool.com
 NEW

DUAL WHEEL SEPARATOR

Quickly & easily remove stuck or frozen dual steel wheels!!

Makes removing stuck or frozen dual

steel wheels quick and easy. Ideal for
use on nearly any truck, bus, van or
trailer that has dual steel wheels.
• Innovative “One-piece” Pusher won’t fall
apart during use
• Pusher is ball bearing-driven for near-zero
turning resistance
• Pusher is heat treated for long-lasting
strength and durability
• Forcing Screw and Pullers have powerful
1-1/8" diameter x 11 threads for years of
reliable service
• Includes two pullers to cover large truck,
trailer and smaller light truck dual wheel
applications
• Components have black oxide or bright nickel
34549 plating finish for rust and corrosion resistance
• Use with air or electric impact wrench
• Components are laser-etched for easy
identification
• Comes in a sturdy, compact, easy to store
case; 6.5" x 9.5" x 2.5", 5.3 lbs
• Proudly Made in USA
• Limited Lifetime Warranty
Dual Wheel
Item No. Description Weight Separator
Demo Video
34549 4 Pc. Dual Wheel Separator kit 5.3 lbs (2.4 kg) #34549
Top Seller Component parts available.

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT100212EB

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
E-mail: sales@kentool.com • www.kentool.com 14
BLUE COBRA® Truck Tire Demount Tool WATCH OUR VIDEO ON
Herramienta de desmontaje de www.kentool.com
neumáticos de camiones BLUE COBRA® TO SEE 4 TRUCK TIRES
Outil de démontage de pneus de camion DEMOUNTED IN ABOUT
BLUE COBRA® A MINUTE!*
Quickly demount nearly any 22.5" and 24.5" tubeless truck tire, up to a 13" wide wheel.
Ergonomic shaped steel handle with no-slip grip for optimum leverage while reducing
back injuries. Solid steel Cobra head is press-fit into the steel handle — no fasteners to
loosen or fall out. Allows demounting of the tire without lifting the entire wheel and tire
off the ground — reduces back injuries. Aluminum bead support to grab the top bead Special Bonus!
of Super Single and Super Wide tires. 2 heavy-duty nylon rollers are easily replaced Ken-Tool's patented leather
when worn, kit No. 35441 includes two rollers and two roll pins. Imported. wheel protector No. 31810
Item No. Length Weight included to help protect
35440 54" (137 cm) 22 lbs (10 kg) expensive alloy wheels!

BLUE COBRA® Truck Tire Service Set

Set No. 35442 Weight: 40 Lbs (18.2 kg).
Juego de servicio de neumáticos de camiones BLUE COBRA®
Ensemble d'entretien de pneus de camion BLUE COBRA® Deluxe Set No. 35444 Weight: 57 Lbs (26 kg).

Set No. Deluxe Set No.

Deluxe Set 35442 35444 Item No. Description Qty.
Blue Cobra® *Blue Cobra®
Truck Tire Demounts 4
No. 35444 ● ● 35440 Blue Cobra® Truck Tire Demount Tool 1 Demount Tool Truck Tires In
● 34645 T45A Tubeless Tire Iron - Our Best Selling Bar! 1 About A Minute
● 34645C T45AC Classic Tubeless Tire Iron 1
● ● 33052 Double-End Tire Spoon 1
● 35330 T11ES Bead Breaking Wedge w/Safety Handle 1
● 35323 T35 H.D. Tire Hammer 1
● ● 35848 8 lb. Bucket Euro Paste Lube 1
Blue Cobra® Blue Cobra®
The Blue Cobra® Truck Tire Service Sets contains all the ● ● 30512 Euro-Style Lube Applicator Brush 1 Demounting A Is So Easy To
tools you need to change most 22.5" & 24.5" tubeless ● ● 31713 Aluminum C-Lok™ Bead Holder 2 385/ 65R22.5 Use Even a Girl
● ● 31810 Leather Rim Protector 1 Super Single Can Do It
truck tires quickly and easily.

Nineteen-FiveTM Tire Mounting & Demount Tool Set for 19.5" Tires
Juego de herramientas de montaje y desmontaje de neumáticos de 19.5" Nineteen-FiveTM
Jeu d'outils de montage - démontage de pneus de 19,5 po Nineteen-FiveTM
No. 33199 Mounting/Demounting Tool

No. 33196
Bead Holder for 19.5"
Aluminum Wheels
Tire Bars For Nineteen-FiveTM Tool Set:
PATENTED 19.5 Tires & Wheels How To Use It On A
No. 31710 Bead Holder for Steel Wheels No. 31810 Aluminum Wheel Protector 19.5 Wheel
19.5" tires must be mounted and demounted with the wheel’s Hub Side Up because the Drop Center of
the wheel is closer to the hub! This makes changing the 19.5" tires notoriously difficult because the hub gets in the
way of conventional bars and spoons. 19.5" tires are also stiffer with high ply ratings and thick beads. Nineteen-Five TM Bent end
bars are specially designed to work on the hub side to make your job easier, faster and safer! New tire bar uniquely For mounting
designed to work on hubside of wheel — where hub protrudes above rim. Specially designed ends manipulate tire with and demounting
less effort. Tools are powder coated to protect from rust and corrosion. Forged from 3/4" diameter high-grade carbon steel bottom bead
and heat-treated for long-lasting strength and durability. Patented Bead Holder to hold bead on 19.5" aluminum wheels.
Set No. 33195 Weight: 9.35 Lbs (4.25 kg).
5 Pc. Set Includes:
Curved end
Item No. Description Length Weight Quantity For mounting
33199 Tire Mounting/Demounting Tool 38" (97 cm) 7 lbs (3.2 kg) 2 and demounting
33196 Bead Holder for 19.5" Aluminum Wheels 7-1/2" (19 cm) 1 lb (.5 kg) 1 top bead
31710 Bead Holder for Steel Wheels - Solid Brass 4-1/2" (11.5 cm) 1 lb (.5 kg) 1
31810 Aluminum Wheel Protector - Leather 6" (15 cm) .35 lbs (.15 kg) 1

15 WARNING: Always wear safety goggles when using hand tools Top Seller
 Tubeless Truck Tire Mount / Demount Irons Tubeless Tire Irons & Sets
Barras para montaje/desmontaje de Juegos y barras para llantas sin
llantas de camiones sin cámara cámara
Démonte-pneu de montage/démontage Démonte-pneus individuels & en
pour pneus de camion sans chambre à air ensemble pour pneus sans chambre à air

T46A, T47A

Ken-Tool manufacturers the largest and most diverse selection of tire mount/ T46B, T47B
demount irons in the world. From the T45A® and T45AC Classic for standard
truck tires, to the Serpent™ and Super Serpent™ Tire Changing Systems for T46C, T47C
wide-base Super Singles, Ken-Tool makes a tire iron for all your tire changing T47A end
needs. Use on truck, agricultural, and industrial tires. One-piece manufacturing
process and design assures long life and superior performance. Heat-treated Sets provide all irons necessary for a variety of tire changing applications.
for strength. Use in pairs. T45A® is a registered trademark of Ken-Tool. Use "C" bar with the "B" extension bar for easier use on large, wide-base truck
TM tires. Use on standard and large truck tires, including industrial, farm,
Ken-Tool ® brings back an old favorite – T45AC buses, and tractors.
Ken-Tool’s patented designs offer one-piece construction,
Standard • Estándar • Standard
and assure long life for many tire-changing applications.
Model Item No. Description Length Stock Weight
Tip ends insert easily and will not cut or rip bead or side-
wall. These designs make it easier to mount and demount T46 34746 Tire Iron Set includes: 3/4" 12 lbs
T46A,T46B,T46C 19 mm 5.4 kg
tires without changing the way the tool is used.
TM T46A 34747 Straight Mount/Demount Tool 36" 3/4" 4.5 lbs
T45AC T45A®
91 cm 19 mm 2 kg
Mount end: Precision forged knob grips rim. New T46B 34748 Straight Mount/Demount Tool 36" 3/4" 4.5 lbs
design won't slip during tire mounting. Special "B" Extension for T46C 91 cm 19 mm 2 kg
curve design always grabs the bead edge. T46C 34749 Offset Mount "C" Bar 22" 3/4" 3 lbs
Demount end: Precision-forged angled tip slides 56 cm 19 mm 1.4 kg
between bead and rim easily. Forged design won't
slip when demounting the second bead. Heavy-Duty • De alta resistencia • Robuste
Model Item No. Description Length Stock Weight
Model Item No. Length Stock Weight
T47 34846 Tire Iron Set includes: 1" 29 lbs
T45A® 34645 37" (94 cm) 3/4" (19 mm) 4.6 lbs (2.1 kg)
T47A,T47B,T47C 25 mm 13.1 kg
T45ACTM 34645C 37" (94 cm) 3/4" (19 mm) 4.6 lbs (2.1 kg)
T47A 34847 Straight Mount/Demount Tool 52" 1" 11 lbs
NEW T45AS 34649 52" (132 cm) 7/8" (22mm) 9 lbs (4.1 kg) 132 cm 25 mm 5 kg
T45HD 34647 41" (104 cm) 7/8" (22 mm) 7 lbs (3.2 kg) T47B 34848 Straight Mount/Demount Tool 49-1/2" 1" 11 lbs
T47A 34847 52" (132 cm) 1" (25 mm) 11 lbs (5 kg) "B" Extension for T47C 126 cm 25 mm 5 kg
T47C 34849 Offset Mount "C" Bar 27" 1" 6.6 lbs
T45A-2000KTM Style Tubeless Tire Iron 69 cm 25 mm 3 kg
Barra de hierro para montaje/desmontaje de neumáticos sin
Mounting
cámara estilo T45A-2000K TM
Démonte-pneu pour pneus sans chambre à air T45A-2000K TM

Design allows for less effort, provides excellent

wheel/rim surface contact area for less side to side
movement. Improved blade and knob design.
Demounting
Tip on one end for 'grabbing' the rim.

Model Item No. Length Stock Weight

T45A-2000K TM 34644 37" (94 cm) 3/4" (19 mm) 5 lbs (2.2 kg)
Mount Demount

Top Seller For more information visit us at www.kentool.com 16

 TM
SerpentTM
Mount & Demount Tire Irons SerpentTM
Tubeless Tire Mount/
Bar To Demount An
11R22.5 Truck Tire
Demount Tire Irons
At MATS 2010
Take the struggle out of mounting and demounting truck tires...
Everything you need to change tires easily and effortlessly.

Use to demount
TM first bead
Serpent Demount Tool
Herramienta de desmontaje
Outil de démontage
“Makes demounting easier than ever.”
Demounts both beads on most truck tires without the need for lifting
the tire/wheel assembly off the ground, and then dropping it. Made
of heat-treated alloy steel for maximum durability and strength. Use to demount
second bead
Model Item No. Length Stock Weight
PATENTED
T2001 35449 39" (99 cm) 3/4" (19 mm) 6.5 lbs (3 kg)

1 2 3 4 5

Serpent TM Mount Tool

Herramienta para montar
Outil d’assemblage
“Makes mounting easier than ever.”
Designed to stop against the rim, and then remove itself effortlessly
from between the rim and bead. The small end of the tool easily gets
under the stretched bead for that last pull.

Model Item No. Length Stock Weight

PATENTED
T2002 35450 38" (96 cm) 11/16" (17.5 mm) 4 lbs (1.8 kg)

1 2

Serpent TM 4 Pc. Tire Changing Set WATCH OUR VIDEOS ON

Juego de 4 piezas para cambiar llantas www.kentool.com
Ensemble 4 pièces de changement de pneu
Set No. 35453 Demount Tool
Weight: 12 Lbs (5.4 kg). T2001 (35449) PATENTED
4 Pc. Set Includes:
Model Item No. Qty. Description
T2001 35449 1 Serpent Demount Tool
T2002 35450 1 Serpent Mount Tool Wheel Protector Bead Holding Device
31710 1 Brass Bead Holding device Mount Tool 31810 31710 Imported.
31810 1 Aluminum Wheel Protector T2002 (35450) (see page 18) (see page 18)

17 WARNING: Always wear safety goggles when using hand tools

SUPER SERPENTTM Mount & Demount Tire Irons Super Single Truck SuperSerpentTM
Tire Mount/Dismount Tbls Tire Mount/
Finally! Tools specially designed to handle big, big tires that actually work! Using Super Serpent™ Demount Tire
Tire Tools
Now, mounting and demounting the biggest, heaviest truck tire is made easy. Irons

Super Serpent TM Mount Tool

Herramienta para montar
Outil d’assemblage
This mount tool for super singles only
weighs about 6-1/2 pounds. It may
seem “funny-looking”, but every inch of
this innovative design is purely serious. 1 2
it makes interference of the second bead,
while mounting the first, a thing of the
past, and delivers twice the leverage of
any “straight-type” tire mounting tool. It Super SerpentTM
Mounting Tool
even has the small end that easily gets
under the bead for that “last pull”. PATENTED Used To Mount
21L-24 Backhoe

Model Item No. Length Stock Weight

T2005 35447 37" (94 cm) 3/4" (19 mm) 6.6 lbs (3 kg)

3 4 5 6

Super Serpent TM
Demount Tool
Herramienta de desmontaje
Outil de démontage
Weighing in at only 5-1/2 pounds, this 1 2
unique, lightweight demount tool for super
singles can be lugged around on a fingertip,
Super SerpentTM
yet delivers the incredible leverage, right
Demounting Tool
where it’s needed, to easily pop those
heavyweights right off their wheels.
PATENTED Used To Demount
21L-24 Backhoe

Model Item No. Length Stock Weight

T2006 35448 37" (94 cm) 3/4" (19 mm) 5.5 lbs (2.5 kg)

3 4 5 6 7 8

Super Serpent TM 5 Pc. Tire Changing Set Mount Tool WATCH OUR VIDEOS ON www.kentool.com
Juego de 5 piezas para cambiar llantas T2005 (35447)
Ensemble 5 pièces de changement de pneu
Wheel Protector Bead Holding Device
Set No. 35446 31810 31710 Imported.
Weight: 19 Lbs (8.6 kg). (see page 18) (see page 18)
5 Pc. Set Includes:
Model Item No. Qty. Description Demount Tool
T2005 35447 1 Super Serpent Mount Tool T2006 (35448) PATENTED
T2006 35448 1 Super Serpent Demount Tool
31710 2 Brass Bead Holding device
31810 1 Leather Wheel Protector

For more information visit us at www.kentool.com 18

 Heavy-Duty Double-End Spoon Combinations Use the 18" and 24" spoons to mount or demount passenger car,
motorcycle, ATV, and light truck tires. The 30" spoons provide
Combinaciones de cuchara de dos extremos enough strength and leverage to work on large truck, bus, off-road
de alta resistencia vehicle, tractor, and aircraft tires. Constructed of premium-quality
carbon steel, and heat-treated for long-lasting performance.
Combinaisons robustes de cuillères à Designed for fast and efficient tire changing. The highly versatile
double extrémité spoon often doubles as a mechanics helper wherever leverage is
needed.

Many size and shape combinations available to meet your specific needs.

Straight / Curved Combination Straight / Drop-Center Combination

Combinación recta/curva Combinación recta/centro rebajado
Combinaison droite / courbe Combinaison droite / base creuse
Model Item No. Length Stock Weight Model Item No. Length Stock Weight
T1920Z18 31830 18" (46 cm) 9/16" (14 mm) 1.3 lbs (.6 kg) T1921Z18 31833 18" (46 cm) 9/16" (14 mm) 1.3 lbs (.6 kg)
T1920Y18 31840 18" (46 cm) 5/8" (16 mm) 1.6 lbs (.7 kg) T1921Y18 31843 18" (46 cm) 5/8" (16 mm) 1.6 lbs (.7 kg)
T1920X18 31850 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg) T1921X18 31853 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)
T1920Z24 32430 24" (61 cm) 9/16" (14 mm) 1.7 lbs (.8 kg) T1921Z24 32433 24" (61 cm) 9/16" (14 mm) 1.7 lbs (.8 kg)
T1920Y24 32440 24" (61 cm) 5/8" (16 mm) 2.1 lbs (1 kg) T1921Y24 32443 24" (61 cm) 5/8" (16 mm) 2.1 lbs (1 kg)
T1920F24 32450 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg) T1921F24 32453 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg)
T1920A30 33050 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs. (1.4 kg) T1921A30 33053 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs. (1.4 kg)
T1920M30 33060 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.5 kg) T1921M30 33063 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.5 kg)

Straight / Curved with Flat Tip Combination Curved / Drop-Center Combination

Combinación recta/curva con punta plana Combinación curva/centro rebajado
Combinaison droite / courbe avec embout plat Combinaison courbe / base creuse
Model Item No. Length Stock Weight Model Item No. Length Stock Weight
T1922Z18 31831 18" (46 cm) 9/16" (14 mm) 1.3 lbs (.6 kg) T2021Z18 31834 18" (46 cm) 9/16" (14 mm) 1.3 lbs (.6 kg)
T1922Y18 31841 18" (46 cm) 5/8" (16 mm) 1.6 lbs (.7 kg) T2021Y18 31844 18" (46 cm) 5/8" (16 mm) 1.6 lbs (.7 kg)
T1922X18 31851 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg) T2021X18 31854 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)
T1922Z24 32431 24" (61 cm) 9/16" (14 mm) 1.7 lbs (.8 kg) T2021Z24 32434 24" (61 cm) 9/16" (14 mm) 1.7 lbs (.8 kg)
T1922Y24 32441 24" (61 cm) 5/8" (16 mm) 2.1 lbs (1 kg) T2021Y24 32444 24" (61 cm) 5/8" (16 mm) 2.1 lbs (1 kg)
T1922F24 32451 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg) T2021F24 32454 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg)
T1922A30 33051 30" 11/16" (17.5 mm) 3.1 lbs. (1.4 kg) T2021A30 33054 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs. (1.4 kg)
T1922M30 33061 30" 3/4" (19 mm) 3.4 lbs (1.5 kg) T2021M30 33064 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.5 kg)

Curved / Curved with Flat Tip Combination Drop-Center / Curved with Flat Tip Combination
Combinación curva/curva con punta plana Combinación centro rebajado/curva con punta plana
Combinaison courbe / courbe avec embout plat Combinaison base creuse / courbe avec embout plat
Model Item No. Length Stock Weight Model Item No. Length Stock Weight
T2022Z18 31832 18" (46 cm) 9/16" (14 mm) 1.3 lbs (.6 kg) T2122Z18 31835 18" (46 cm) 9/16" (14 mm) 1.3 lbs (.6 kg)
T2022Y18 31842 18" (46 cm) 5/8" (16 mm) 1.6 lbs (.7 kg) T2122Y18 31845 18" (46 cm) 5/8" (16 mm) 1.6 lbs (.7 kg)
T2022X18 31852 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg) T2122X18 31855 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)
T2022Z24 32432 24" (61 cm) 9/16" (14 mm) 1.7 lbs (.8 kg) T2122Z24 32435 24" (61 cm) 9/16" (14 mm) 1.7 lbs (.8 kg)
T2022Y24 32442 24" (61 cm) 5/8" (16 mm) 2.1 lbs (1 kg) T2122Y24 32445 24" (61 cm) 5/8" (16 mm) 2.1 lbs (1 kg)
T2022F24 32452 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg) T2122F24 32455 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg)
T2022A30 33052 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs. (1.4 kg) T2122A30 33055 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs. (1.4 kg)
T2022M30 33062 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.5 kg) T2122M30 33065 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.5 kg)

19 WARNING: Always wear safety goggles when using hand tools

Tire Mount / Demount Spoons Mount / Demount Tire Tools - Small Tire
Espátula para montaje/desmontaje de llantas Herramientas para montaje y
desmontaje de llantas
Cuillères de montage/démontage de pneus – Llantas pequeñas
These tools are designed for fast and efficient tire changing. Use the 18" and
24" spoons to mount or demount passenger car, motorcycle, ATV, and light Outils de montage/démontage
truck tires. The 30" spoons provide enough strength and leverage to work on de pneus - Petits pneus
large truck, bus, off-road vehicle, tractor, and aircraft tires.
Tools are used in
Mount Demount
pairs to mount or demount small passenger, industrial, ATV, and motorcycle tires.
Model Item No. Length Stock Weight
T6A 32106 16-1/2" (42 cm) 5/8" (16 mm) 1.5 lbs (.7 kg)
Tire Irons - Small Tire
Barras para llantas – Llantas pequeñas
Straight Démonte-pneus - Petits pneus
Recta • Droite 32109
Model Item No. Length Stock Weight 32116
T1X 32101 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg) Pro tire changing tools for small tires. Ideal for mounting and demounting
T19 32119 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg) motorcycle, ATV, lawn tractor, golf cart, and small tires by hand. Rounded
ends will not pinch tube.
T19A 33219 30" (76 cm) 11/16" (17.5 mm) 3 lbs (1.4 kg)
T19M 33022 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.54 kg) Model Item No. Length Stock Weight
T38 33238 30" (76 cm) 7/8" (22 mm) 4.8 lbs (2.2 kg) T9A 32109 9" (23 cm) 7/16" (11 mm) .4 lbs (.16 kg)
T16A 32116 16" (41 cm) 7/16" (11 mm) .7 lbs (.3 kg)
Drop-Center
T9C 32110 2 pc. Carded Set - Contains: Qty. (2) T9A 9" Bars
Combinación con base con caída • Base creuse
T16C 32117 2 pc. Carded Set - Contains: Qty. (2) T16A 16" Bars
Model Item No. Length Stock Weight
T21R 32121 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg) Tire Irons - Small Tire
T21F 34121 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg) Barras para llantas – Llantas pequeñas
T21A 33020 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs (1.4 kg)
Démonte-pneus - Petits pneus
T21M 33024 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.54 kg)
T21HD 34122 30" (76 cm) 7/8" (22 mm) 4.5 lbs (2.0 kg) Pro tire changing tools 32115
for small tires. Sturdy,
Curved comfortable plastic 32118
Curva • Courbe handles. Ideal for mounting and demounting motorcycle, ATV, lawn
Model Item No. Length Stock Weight tractor, golf cart, and small tires by hand. Rounded ends will not pinch tube.
T2X 32102 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)
Model Item No. Length Stock Weight
T20 32120 24" (61 cm) 11/16" (17.5 mm) 2.4 lbs (1.1 kg)
T5 32115 16" (41 cm) 7/16" (11 mm) .8 lbs (.36 kg)
T20A 33220 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs (1.4 kg)
T8 32118 16" (41 cm) 7/16" (11 mm) .8 lbs (.36 kg)
T20M 33023 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.54 kg)
32114 2 Pc. Small Tire Iron Set 1.6 lbs (.7 kg)
T39 33239 30" (76 cm) 7/8" (22 mm) 4.5 lbs (2.0 kg) Contains: Qty. (1) T5 (32115)
Qty. (1) T8 (32118)
Curved with Flat
Curva con punta plana • Courbe avec embout plat European Style Tools
Model Item No. Length Stock Weight Herramientas de estilo europeo
T22R 31820 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)
T22F 32420 24" (61 cm) 11/16" (17.5 mm) 2.5 lbs (1.1 kg)
Outils de style européan
Use on car, motorcycle, truck, and agricultural tires.
T22A 33021 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs (1.4 kg)
Designed for mounting
T22M 33025 30" (76 cm) 3/4" (19 mm) 3.4 lbs (1.54 kg)
and demounting tires. Best if used in pairs.
T22HD 33026 30" (76 cm) 7/8" (22 mm) 3.4 lbs (1.54 kg)
Model Item No. Length Stock Weight
Small Tire Mount/Demount Irons T43C 39806 21" (53 cm) 7/8" (22 mm) 3.1 lbs (1.4 kg)
Barras para montaje/desmontaje de
llantas pequeñas
Model Item No. Length Stock Weight
Leviers de montage/démontage de T43D 39810 30" (76 cm) 7/8" (22 mm) 4.5 lbs (2.0 kg)
petits pneus
New designs are based on popular European styles.
Extended length of the flat curved sliding surface
provides mounting ability comparable to much longer Model Item No. Length Stock Weight
traditional tire irons. Sizes available for motorcycle, T44 39808 31" (79 cm) 7/8" (22 mm) 5.3 lbs (2.4 kg)
passenger, truck, and heavy-duty tires. Designed for
T44 illustration
mounting and demounting tires. Best if used in pairs.
Motorcycle / Small Wheel
Ruedas pequeñas/de motocicleta • Motocyclette/Petites roues
Cross Reference: Ken-Tool
No. T43A T43C T43D T44 T41
Model Item No. Length Stock Weight CPM Livraison Face 68 Force Halte Sayam
T43A 39805 15" (38 cm) 3/4" (19 mm) 1.8 lbs (.8 kg) Ref. 1547 Ref.426/68 Ref. 1289 Ref. 1060 Ref. 858

Top Seller For more information visit us at www.kentool.com 20

Lock Ring Tools Lock Ring Tool
Herramienta para anillos de seguridad
Herramientas para anillos
Outil pour anneau verrouilleur
de seguridad
Removes continuous side
Outils pour anneau verrouilleur rings on two-piece truck rims.
These tools are designed to remove most truck lock rings. A must-have
for anyone mounting or demounting multi-piece rims. Use in pairs.
Model Item No. Length Stock Weight
T27A 32128 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)

Heavy-Duty Lock Ring Tool

Herramienta para anillos
de seguridad de alta
resistencia
Truck Lock Ring Remover Outil robuste pour anneau
verrouilleur
Desmontador para anillos de seguridad para camiones
Dégageur d’anneau verrouilleur pour camions

Designed for smaller diameter wheels.

Use for multi-piece wheels, especially hub type.

Model Item No. Length Stock Weight

T48A 34648 37" (94 cm) 3/4" (19 mm) 4.6 lbs (2.1 kg)
Model Item No. Length Stock Weight
T23 ® 32123 24" (61 cm) 11/16" (17.5 mm) 2.4 lbs (1 kg) Industrial Wheel Lock Ring Set
Truck Lock Ring Remover Juego de anillos de traba para ruedas industriales
Desmontador para anillos de seguridad para camiones Jeu d'anneaux verrouilleurs de roues industrielles
Dégageur d’anneau verrouilleur pour camions 32131
Demount
Designed for smaller diameter wheels. Prep Tool

Model Item No. Length Stock Weight

T23A® 33223 30" (76 cm) 11/16" (17.5 mm) 3.1 lbs (1.4 kg)

Combination Rim / Ring Tool Separator end separates split Pry-out end reaches behind slot-
Herramienta para combinación de llantas/anillos ring from solid flange ring ted end of split ring to pry it out
Deux en un pour jante/anneau and over the flange of the wheel
32130
Flat tapered end ideal for all Mount /
around ring and rim work. Demount
Tool

Model Item No. Length Stock Weight

T23B 33224 23-1/2" (60 cm) 11/16" (17.5 mm) 2.4 lbs (1 kg)

Rim Lock Tool

Herramienta para anillos de seguridad de llantas Demount end lifts and fully Mount end is used to mount
Bloque-talons demounts split ring split ring

For servicing wide base rims. Specially designed to remove & replace lock rings on
multi-piece industrial forklift wheels. Removing and
replacing lock rings on multi-piece industrial wheels
Model Item No. Length Stock Weight
presents its own set of unique problems – these tools
are specifically designed to make that job easier, faster,
T25 32125 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg)
and safer. Helps prevent injury – easier to keep hands PATENTED
Special Lock Ring Tool safely outside of press cage! Powder coated to protect
from rust and corrosion; bright orange color helps
Herramienta para anillos de seguridad especiales prevent lost tools. Forged from high-grade carbon steel
Outil spécial pour anneau verrouilleur and heat-treated for long-lasting strength and durability.

Long tapered curved end Set No. 32129 Weight: 3.3 Lbs (1.5 kg). Industrial Wheel Lock Ring
for continuous side rings. 2 Pc. Set Includes:
Tool Set #32129

Item No. Description Length Stock Weight

Model Item No. Length Stock Weight 32130 Mount Demount Tool 15-3/4" (40 cm) 5/8" (16 mm) 1.8 lbs (.8 kg)
T27 32127 18" (46 cm) 11/16" (17.5 mm) 1.8 lbs (.8 kg) 32131 Demount Prep Tool 15-1/2" (40 cm) 5/8" (16 mm) 1.5 lbs (.7 kg)

21 WARNING: Always wear safety goggles when using hand tools Top Seller
 Bead Holding Devices
DON’T RISK INJURY Dispositivos de fijación de talón
Dispositifs de retenue des talons
IRONMANTM Bead Holding Device
Ergonomic Wheel Lifting Bar Dispositivo para soporte de llantas
Barra ergonómica para el levantamiento Dispositif de retenue des talons
de neumáticos IronmanTM
Barre ergonomique de levée de roue
IronmanTM
ERGONOMIC:
Use the leverage
created by the tool
IronMan™
– NOT YOUR BACK! Wheel Lifting Bar
Now reaches over extra wide bead of
Reduces back strain. Easily and safely super singles. Holds the bead in place
lift heavy, awkward truck tire and against the wheel when mounting the
wheel assemblies. Extremely useful tire on to the wheel. Do not use to pry.
in outdoor conditions – when truck Bead Holding How to Properly
Imported. Device Use Bead Holders
tire and wheel assemblies can become
#31710 on a
wet and slippery. Lift all sizes and Item No. Description Weight
21L-24 Backhoe
types of small and large heavy truck 31710 Solid Brass Bead Holding Device 1.8 lbs (.8 kg) Tire and Wheel
wheels: Standard sizes including 22.5"
and 24.5" wheels, plus European Specially designed forged ends
(which have 1" lug holes), Super Wide
Aluminum Bead Holder For Steel & Aluminum Wheels
work from either side of the wheel
and even the Super Single (a 340 lb. assembly as it lays flat Sujetador de talón de aluminio para ruedas de acero y
assembly) size. aluminio
Support de talon en aluminium pour roues en acier et en
aluminium

Specially designed forged Specially designed

31713 31714
knob end for hub side up spoon end for hub side down
Special C-Lok™ shape fits nearly all
Model Item No. Length Stock Weight passenger, light truck, agriculture and truck
T950 34950 58" (147 cm) 1" (25 mm) 10 lbs (4.5 kg) wheels without slipping off. Aluminum design
is lightweight but very strong and is less likely
Aluminum Wheel Protector to mar alloy wheels. Great for super singles
and super wide wheels — fits both steel and
Newest Bead Aluminum
Holder - Made Bead Holder
Protector de cubiertas de aluminio aluminum wheels. Available as a cabled pair From Aluminum
No. 31714 for difficult wheels. Imported.
Protecteur pour roues en aluminium
Item No. Description Length Weight
31713 Single Aluminum Bead Holder 5.5" (14 cm) 8 oz (.2 kg)
31714 32" Cabled Pair 1 lb (.5 kg)

Bead Holder For 19.5" Aluminum Wheels

Sujetador de talón para ruedas de acero y
aluminio de 19.5"
Support de talon pour roues en
aluminium de 19,5 po
PATENTED

Protect expensive rims from damage during manual tire changing.

Prevents tire tools from marring or scratching aluminum or steel rims when
using Ken-Tool’s manual tire changing tools. Durable leather protector fits on
PATENTED
the rim and protects inside of the rim well. Use with an assortment of tire tools
including: T45A® - style tire irons, Serpent TM, tire spoons, other Ken-Tool tire
changing tools. When one end wears out, flip it over and use the opposite end. Steel bead holder for 19.5" aluminum truck wheels that fit 9/16" diameter
Great for roadside service or in the shop. studs. Always mount/demount 19.5" wheels with hub side up.
Item No. Description Length Weight Item No. Description Weight
31810 Leather Rim Protector 6" (15 cm) 6 oz (.2 kg) 33196 Bead Holder for 19.5" Aluminum Wheels 1 lb (.5 kg)

For more information visit us at www.kentool.com 22

Bead-Breaking Tools Truck / Farm / OTR Bead-Breaking Tool / Driving Iron
Herramientas desmontadoras de llantas para Herramienta desmontadora de llantas/
camiones/vehículos de granja/de carretera barra de hierro desmontadora
Outils de décollage des talons pour Outil de décollage des
camions/tracteurs/véhicules tout talons/Levier d'entraînement
terrain

Driving iron is used for loosening rusted truck and

bus beads. Will speed truck tire repair work and
save labor and time.

Model Item No. Length Stock Weight

T26A 32126 11-3/4" (30 cm) 1-1/4" (32 mm) 4.4 lbs (2 kg)

Impact Bead Breakers

These lightweight, portable tools are a great alternative to handled bead Desmontadoras de llantas de impacto
breaking wedges or hydraulic bead breakers. One end is used to remove Démonte-talons à chocs
frozen or rusted beads from all types of rims. On the T52, the other end can
Bead breaker loosens beads with bead-
be used as a leverage bar when inserted into the 35695 or 35697 Truck Lug
breaking foot and ram bar, but never cuts
Wrench.
the bead of the tire. The wedge foot is forced
between the bead and rim flange. Breaker is
Swan Neck Leverage Bar
designed for shop or road use. No other bead breaking
Palanca de cuello de cisne tools are necessary. Provides greater accuracy than other
Barre de levage à col de cygne conventional bead breakers.
T26B has exclusive
spring action design
to reduce user fatigue
associated with slide
Model Item No. Length Stock Weight
hammer kickback.
T41 33341 30" (76 cm) 7/8" (22 mm) 5.3 lbs (2.4 kg)

30" Bead Breaker

Desmontadora de llantas de 30 pulgadas
Démonte-talons de 30 po
T24B Economy
1" Dia. Ram

Model Item No. Length Stock Weight

T26B Heavy-Duty
T42 33342 30" (76 cm) 7/8" (22 mm) 4.8 lbs (2.2 kg) 1-1/4" Dia. Ram

Bead Breaker Leverage Bar

Palanca desmontadora de llantas
Barre de levage pour démonte-talons Model Item No. Description Length Length Ext. Weight
T24B 35924 Economy 46" (117 cm) 72" (183 cm) 13.5 Ibs (6.1 kg)
T26B 35926 Heavy-duty 50" (127 cm) 80" (203 cm) 23 Ibs (10.4 kg)
Also for use with the T95 wrenches.

Model Item No. Length Stock Weight

Floor Type Bead Breaker
T52 34652 33" (84 cm) 7/8" (22 mm) 5.5 lbs (2.5 kg) Desmontadoras de llantas con pie
Démonte-talons sur sol
Portable Bead Breaker Ideal for stubborn tires. Use to prevent the bending of wheels.
Desmontadora de llantas portátil A great solution for custom and foreign wheels.
Démonte-talons portatif
For Passenger
and Light Truck.

Portable bead-breakers are great for custom and foreign wheels.

They break beads on most sizes of passenger tires and light trucks.

Model Item No. Handle Length Weight Model Item No. Description Tread Width Weight
T100 34670 36" (91 cm) 5.2 lbs (2.3 kg) T98 35998 Deluxe up to 11" (28 cm) 29.8 Ibs (13.5 kg)

23 WARNING: Always wear safety goggles when using hand tools Top Seller
 Valve BreakerTM Duck-Billed
Herramienta para romper válvulas Bead Breaking Wedges
Valve Breaker TM Our most popular bead breakers.
Outil casse-valve Valve Breaker TM Cuñas desmontadoras de
llantas de boca plana
Coins d’écartement de
talons en bec de canard
Wood Handled
Con mango de madera
Manche en bois
Increased contact area between the handle and
the hammer head causes the handle to have a
tighter fit when the head is seated on the handle.
By increasing end-taper of the handle the
hammer head cannot come off the end of the
handle No slits in the top of the handle minimizes the effect
of Humidity/Climate (expansion & contraction) on the handle.

T11E ®

T11ES
Model Item No. Handle No. Length Weight
Valve Breaker Tool:
T11D 35327 T11DH 17" (43 cm) 4.8 lbs (2.2 kg)
How To Use It
T11E® 35329 T11EH 30" (76 cm) 11 lbs (5 kg)
New T11ES orange safety grip handle. Specially formulated granulated
handle coating provides extra grip for sure control of the steel bead
breaking wedge.
Model Item No. Handle No. Length Weight
NEW T11ES 35330 T11EHS 30" (76 cm) 11 lbs (5 kg)

Fiberglass Handled
Solid ram bar (not hollow pipe)
drives more energy into valve
Con mango de fibra de vidrio
Manche en fibre de verre
TG11D

Model Item No. Handle No. Length Weight

35934 35934, 35936
PATENTED TG11D 35427 TG11DH 18" (46 cm) 4.8 lbs (2.2 kg)
TG11E 35429 TG11EH 32" (81 cm) 11 lbs (5 kg)

Polymer Handled
35938 Con mango de polímero
35936 Manche en polymère

Valve Breaker Metric Valve Breaker

Repair Kit 35935 Repair Kit 35937

Now Available in Steel and Alloy Models!

Quickly and easily remove valve stems from steel and alloy wheels! Made in
USA from quality, high-grade steel. Heat-treated punch for top performance
Handle
and long life. Pinch-preventing Safety Grip with vibration dampening tube grip. cross section PATENTED
Long-lasting baked powder coat finish. T34B designed to fit into most 30"
toolboxes. Simple to re-build — only 3 components.
Item Tip
Model No. Description Length Diameter Weight Hump Design prevents tool from wedging between rim and bead.
T34B 35934 Valve Breaker 27" (69 cm) .5" (14mm) 9 lbs (4.1 kg) Breaks the bead with little or no prying. New polymer handle design
for longer lasting everyday use. Full length fiberglass core for
T36B 35936 Valve Breaker 45" (114 cm) .5" (14mm) 16 lbs (7.2 kg)
greater strength. Coating on handle provides durability.
NEW T38B 35938 Metric Valve Breaker 45" (114 cm) .35" (9mm) 16 lbs (7.2 kg)
35935 3 Pc. Valve Breaker Repair Kit .5" (14mm) 1 lb (.5 kg) Model Item No. Replacement Handle Length Head Weight
NEW 35937 3 Pc. Metric Valve Breaker .35" (9mm 1 lb (.5 kg) T11K TM 35460 T11KH (35230)* 32" (81 cm) 10.5 lbs (4.8 kg)
Repair Kit *New handle design T11KH (35230) will not work with old style T11E head

Top Seller For more information visit us at www.kentool.com 24

 General Purpose Tire Hammers • Martillos para llantas universales • Masse à tout usage
Designed for tire service in a variety of sizes and styles. Use rubber head replacement T11RH (35104).

Wood Handled Fiberglass Handled

Con mango de madera Con mango de fibra de vidrio
Manche en bois Manche en fibre de verre
Model Item No. Handle No. Length Weight Model Item No. Handle No. Length Weight
T11B 35311 T11BH 14-1/2" (37 cm) 4.5 lbs (2.0 kg) TG11B 35411 TG11BH 16" (41 cm) 4.8 lbs (2.1 kg)

Model Item No. Handle No. Length Weight Model Item No. Handle No. Length Weight
T33R 35317 T11HN 14" (36 cm) 2.3 lbs (1.0 kg) TG33R 35417 TG31H 16" (41 cm) 2.5 lbs (1.1 kg)

Heavy Duty Tire Hammers • Martillos para llantas de alta resistencia • Masses à pneu robuste
Hammers are used for mounting and demounting tires. They make tire changing faster and easier for passenger car, truck, bus, farm tractor,
and aircraft tires. A variety of weights and sizes are offered to meet all your tire changing needs. Non-marring rubber end can be used for
driving on lock rings. Use rubber head replacement T34RH (35105).

Wood Handled Fiberglass Handled

Con mango de madera Con mango de fibra de vidrio
Manche en bois Manche en fibre de verre
Model Item No. Handle No. Length Head Weight Weight Model Item No. Handle No. Length Head Weight Weight
T34 35321 T11CH 17" 4.8 lbs 5.4 Ibs TG34 35421 TG11CH 18" 5.5 Ibs 6 lbs
43 cm 2.2 kg 2.4 kg 46 cm 2.5 kg 2.7 kg

Model Item No. Handle No. Length Head Weight Weight Model Item No. Handle No. Length Head Weight Weight
T35 35323 T11DH 16-1/2" 5.5 lbs 6.1 lbs TG35 35423 TG11DH 18" 4.8 lbs 6.6 lbs
42 cm 2.5 kg 2.7 kg 46 cm 2.2 kg 3.0 kg

Model Item No. Handle No. Length Head Weight Weight Model Item No. Handle No. Length Head Weight Weight
T36 35325 T11CH 16-1/2" 5.8 lbs 5.3 lbs TG36 35425 TG11CH 18" 5.8 lbs 6 lbs
42 cm 2.6 kg 2.4 kg 46 cm 2.6 kg 2.7 kg

Replacement Handles Polymer • Polímero • Polymère PATENTED

Mangos de repuesto
Manches de remplacement Model Item No. For Hammer No. Length Weight
T11KH 35230 T11K TM 32" (81 cm) 2.3 lbs (1.0 kg)
Top Quality U.S. Hickory
U.S. Hickory de máxima calidad • Qualité supérieur U.S Hickory Fiberglass • Fibra de vidrio • FIbre de verre
T11EHS TG37H

New T11EHS orange safety grip handle. Specially formulated granulated handle Model Item No. For Hammer No. Length Weight
coating provides extra grip for sure control of the steel bead breaking wedge. TG31H 35206 TG11R, TG31, TG33R 16" (41 cm) 1 lb (.5 kg)
TG11BH 35211 TG11B 16" (41 cm) 1.3 lbs (.6 kg)
T11EH
TG11CH 35219 TG11C, TG34, TG36 18" (46 cm) 2.5 Ibs (1.1 kg)
Model Item No. For Hammer No. Length Weight TG11DH 35227* TG11D, TG35 18" (46 cm) 1.2 Ibs (.5 kg)
T11BH 35111 T11B 15" (38 cm) .75 lbs (.3 kg) TG11EH 35229* TG11E 32" (81 cm) 2.3 lbs (1.0 kg)
T11HN 35113 T11R, T31, T33R 15" (38 cm) .75 Ibs (.2 kg) * Nulok adapter (others use epoxy).
T11CH 35119 T11C, T34, T36 17" (43 cm) .75 lbs (.3 kg)
T11DH 35127 T11D, T35 17" (43 cm) .75 lbs (.3 kg) Replacement Rubber Heads
T11EH 35129 T11E® 30" (76 cm) 1.2 lbs (.5 kg) Cabezas de goma de repuesto
T11EHS 35131 T11E® 30" (76 cm) 1.2 lbs (.5 kg) NEW
Tête de remplacement en caoutchouc
80H-3H 37012 80H-3, 80H-4 10" (25 cm) .5 lbs (.2 kg) NEW
85H-3H 37023 85H-3, 84H-2, 84H-4 15" (38 cm) .75 lbs (.3 kg) NEW Model Item No. Description For Hammer No.
84H-8H 37025 84H-8, 84H-10, 84H-12, 84H-16 36" (91 cm) 1.4 lbs (.6 kg) NEW T11RH 35104 Rubber Head T11R, TG11R, T33R, TG31
84H-20H 37089 84H-20 36" (91 cm) 1.4 lbs (.6 kg) NEW T34RH 35105 Rubber Head T34, TG34, T35, TG35, T36, TG36

Aluminum • Aluminio • Aluminium Epoxy Kits • Equipos de epoxi • Ensembles en époxy

Model Item No. Description For Hammer No.
Model Item No. For Hammer No. Length Weight T12B 35201 Epoxy Kit TG11B, TG11R, TG31, TG33R
T11AH 35529 T11E ®, TG11E 32" (81 cm) 4.3 lbs (2 kg) T12D 35202 Epoxy Kit TG34, TG35, TG36, TG37

25 WARNING: Always wear safety goggles when using hand tools Top Seller
Tire Snake® Manual Tire Changers
‘Snake ® ’ para llantas / ‘Snake ® ’ Outil à pneu Cambiadores de llantas manuales
Snake ® Démonteurs de pneus manuels

Floor Mount
Tire Snake mounting and demounting tools for use with center
post tire changers. Included with T600 Tire Changer, designed Montaje de piso
for wheels from 4" to 12". Included with T601 Tire Changer, Montage au sol
designed for wheels from 4" to 15", the longer length provides
greater leverage.

Model Item No. Length Stock Weight

TS72 34672 22" (56 cm) 5/8" (2 cm) 2 lbs (.9 kg)
TS74 34674 28" (71 cm) 5/8" (2 cm) 2.5 lbs (1.1 kg)
TS42 34678 42" (102 cm) 3/4" (19 mm) 5.3 lbs (2.4 kg)

Air Blast ® Bead Seater for Small Tires

Calzador a chorro de aire para llantas pequeñas
Air comprimé pour repos de talon de petits pneus
Threadscrew
has been
milled to fit
MTD wheels.

Mounts and demounts a full range of tires on rim diameters

from 4 to 15 inches. Tapered bearing guide positively centers
straight shaft hubs of all diameters. A built-in, infinitely
adjustable bead breaker works on rims up to 15" in diameter
and 24" in width without disassembly. Includes a Ken-Tool Small Tire
exclusive, 28" Tire Snake® mount/demount tire tool. Changing Tools
Part 1
Model Item No. Height Weight
T601 38601 32" (81 cm) 31 lbs (14 kg)

For your small tire changing needs, Ken-Tool introduces a fast, easy and Bench / Rim
economical way to seat beads in one simple operation with the new Air Blast
Bead Seater. This patent-pending air-blaster bead seater, seats the bead on
Clamp Mount
Small Tire
most small tubeless tires with rims ranging from 4 to 12 inches. This is a Montaje de banco/ Changing Tool
one-man operation; just point, release, and watch this fast-acting bead abrazadera de llantas Part 2
seater do all the work.
Montage sur
Item No. PSI Weight banc/crapaud
31440 Rated to 150-PSI 5.6 lbs (2.5 kg)

ATV Bead Breaker

Desmontadora de llantas
para vehículos todo terreno
Décolleur de talon
pour VTT

Threadscrew
has been
PATENTED milled to fit
MTD wheels.
The ATV Bead Breaker is a manual solution that satisfies both manufacturers Mounts and demounts a full range of tires on rim diameters from 4 to 12
and tire changing technicians searching for a quick, safe, and affordable ATV inches. Mounts easily to a bench or in any standard, four-position rim-
bead breaker that really works. A rugged, yet lightweight tool that delivers the clamp tire changer. A built-in, three fin centering device mounts standard
tremendous force necessary to overcome the resistance of a bead keeper. lug-type rims with 2" and larger center hole. Square base prevents turning
Constructed of heavy-duty steel, the ATV Bead Breaker works with any center in the changer during use. Includes a Ken-Tool exclusive, 22" Tire Snake®
post tire changing machine and adjusts to sizes of 6 to 12 inch ATV rims mount/demount tire tool.
without the hassle of clevis pins. No hammers, wrenches, or additional tools
are required. Very affordable! Model Item No. Height Weight
T600 38600 16-1/2" (42 cm) 21.7 lbs (10 kg)
Item No. Weight
38620 7 lbs (3.2 kg) For additional small tire tools see page 16

For more information visit us at www.kentool.com 26

Tire Mount / Demount Lubricants Lubricant Applicators
Lubricantes para montaje/desmontaje de Aplicadores de lubricantes
neumáticos Applicateurs de lubrifiant
Lubrifiants de montage & démontage de pneus Bead Lubricant Swab
Professional grade lubricants make tire mounting and demounting easier
and more efficient. Estropajo para lubricante de talones
Tiger Paste Lubricant Écouvillon pour lubrifiant de talon
Durable cotton applicator
Lubricante Tiger Paste quickly holds and applies lube,
Lubrifiant Tiger Paste twisted wire construction and
Superior formulation for use in mounting and wood handle.
demounting commercial, OTR and specialty
equipment tires, with rust inhibitor. Model Item No. Length Weight
B111 30511 12" (30.5 cm) 3 oz (.1 kg)
Item No. Weight
35837 7.5 lb. (3.4 kg)
NEW Euro Style Lube Brush
Ultra Lube Pincel para lubricante estilo europeo
Lubricante Ultra Lube Brosse de lubrification style européen
Lubrifiant Ultra Lube
Premium rim and rust retardant and tire mounting/
demounting lubricant for demanding applications. Designed to the ideal angle to fit
between the tire bead and rim. Imported.
Item No. Weight
35839 25 lb. (11.4 kg) Item No. Length Weight
NEW 30512 11" (28 cm) 10 oz (.3 kg)
Euro Paste Lube
Lubricante Euro Paste Lube OSHA Tire Serivce Charts
Lubrifiant Euro Paste Lube Cuadros de servicio de neumáticos OSHA
Premium tire mounting/demounting lubricant dries Diagrammes d'entretien des pneus OSHA
tacky to prevent rim slippage, with rust retardant.
Item No. Weight
35848 8 lb. (3.6 kg)

Heavy Paste Lube

Lubricante Heavy Paste Lube
Lubrifiant Heavy Paste Lube
Concentrated economical tire mounting/demounting
and bead packing lubricant, makes up to 15 gallons.
Item No. Weight
35840 25 lb. (11.4 kg)

Bead-Eze® Tire Lubricant

Lubricante para neumáticos Bead-Eze ®
Lubrifiant de pneu Bead-Eze ®
Penetrating water-based lubricant for tire mounting/
demounting, can be diluted for leak detection, six-pack.
Model Item No. Description Weight OSHA Tire Mount/
T147A 35847 One Gallon, 6-Pack 54 lbs (24.5 kg) Demount Safety
Instructions & Charts.
Bead-Eze® Tire Lubricant 24" x 70" High Quality
Lubricante para neumáticos Bead-Eze ® posters. Suitable for
wall mounting in service area per
Lubrifiant de pneu Bead-Eze ® OSHA 29 CFR 1910.77.
Penetrating water-based lubricant for tire mounting/
demounting, can be diluted for leak detection. Includes:
Demounting & Mounting Procedures
Model Item No. Description Weight
for Tube-type Truck & Bus Tires Chart
T147A 35847S One Gallon, single 9 lb. (4.1 kg)
(OSHA 3402 10R-11)
Detecto Mist Leak Locator Demounting & Mounting Procedures
for Tubeless Truck & Bus Tires Chart
Localizador de fugas Detecto Mist
(OSHA 3401 10R-11)
Localisateur de fuites Detecto Mist
Spray on tire to instantly detect air leaks, concentrated Multi-Piece Rim Matching Chart
formula dilutes with water. (OSHA 3403 10R-11)

Model Item No. Description Weight Item No. Description Weight

D105A 35805 One Quart 2.3 lb. (1 kg) 39998 3 Poster Set 1 lb (.5 kg)

27 WARNING: Always wear safety goggles when using hand tools

 Tire Bead Seaters Wire Brush
Calzador para llantas Cepillo de alambre • Brosse métallique
Cordons de talon de pneus
31437 Cleans rust from
One-piece rubber tube for mounting
hard-to-seat radial, bias-belted, or rims and wheels.
conventional truck tires. As tire is Model Item No. Length Weight
inflated, the lubricated bead seater forms a T15 30515 14" (36 cm) 5 oz. (.2 kg)
seal between the rim and tire, allowing the
air pressure to force the beads into the rim Tire Spreaders
flange. As proper pressure is reached, the
bead seater slides out and over the rim.
Separadores de llantas • Écarte-pneus
Use bead lubricant with bead seaters. Tire Spreader with Lock Pin
Passenger / Light Truck Separador de llanta con pasador de bloqueo
Camión liviana/vehículo de pasajeros • Automobile/camion léger Écarte-pneu avec
Item No. Fits Rim Sizes Weight goupille de sécurité
31446 14-15" (36 - 38 cm) 1.5 lbs (.7 kg)
Truck • Camión • Camion
Item No. Fits Rim Sizes Weight
31437 16-1/2" to 17-1/2" (42 to 45 cm) 2 lbs (.9 kg)
Imported.
31438 19-1/2" (50 cm) 2.3 lbs (1 kg)
Model Item No. Spread Capacity Weight
31439 22-1/2" to 24-1/2" (57 to 62 cm) 2.3 lbs (1 kg)
T51 31551 4"- 6" (10-15 cm) 3.9 lbs (1.7 kg)
Pneumatic Bead Expanders
Ratchet Action Truck Tire Spreader
Expansores neumáticos de llantas
Separador de llantas para camiones
Tubes d’extension de talon pneumatiques Ratchet Action
Écarte-pneu à rochet
T132
pour camions

Model Item No. Spread Capacity Weight

T54 31554 3-1/2" - 14" (9 - 36 cm) 7.3 lbs (3.3 kg)
T131
Professional Wheel Weight Tool
Expanders fit most bias ply tubeless Herramientas profesional para pesar ruedas
tires. A pliable neoprene rubber tube
is encased in a tough, long-lasting nylon cover. Expanders slip easily over
Outil professionnel pour masses d'équilibrage
tire and withstand contact with oil, grease, solvents, and acids. Expands Clip-claw crowbar, punch designed
passenger and light truck beads by compressing tread. T131 is for smaller handles, and heavy hammerhead
tires, T132 for belted bias ply tires and steel belted radials, and T133 for provide years of use. Imported.
standard bias ply tires. All models feature an over-pressure relief valve and Model Item No. Weight
external pressure quick release valve for safe operation.
B230 35354 1 lb (.5 kg)
Model Item No. Min / Max Tire O.D. Tube Diameter Weight
NEW T131 31431 10 - 22" (26 - 56 cm) 2-1/4" (6 cm) 2 lbs (.9 kg) Standard Wheel Weight Tool
T132 31432 24 - 34" (61 - 86 cm) 2-1/4" (6 cm) 2.8 lbs (1.2 kg) Herramientas estándar para pesar ruedas
T133 31433 22 - 32" (60 - 81 cm) 3/4" (2 cm) .75 lbs (.3 kg)
Outil standard pour masses d’équilibrage
"Challenger" Wheel Balancer This passenger car wheel weight tool
is the industry standard. Imported.
Balanceador de ruedas • Équilibreuse de roues
Accurate, easy-to-operate, self-leveling balancer with Model Item No. Weight
easy-to-read circular level accurately balances all wheels B232 35355 1 lb (.5 kg)
when using regular weights. Bubble type balancer is
portable and may be used indoors or outdoors, even on Professional 4-Way Valve Core Tool
a stone driveway. Convenient built-in weight storage Herramienta profesional para núcleos de
space in the base of the balancer combines everything válvulas de 4 vías
needed in 2 sq. ft. of floor space. All steel parts are
plated to resist rust. Most passenger car wheels can be Outil à valve professionnel 4 en 1 pour noyaux
balanced directly on the balancer. Bubble will not freeze. Handy 4-in-1 standard valve tool repairs cap
Restriction: Minimum 1-1/2" diameter hub holes to threads, repairs core threads, has special
maximum 4-1/2" hub holes. Imported. easy-out feature for removing damaged cores,
Model Item No. Description Size Weight and screwdriver for removing standard cores.
Black, heavy-duty hardened steel. Imported.
X161 31361 Wheel Balancer 22"H x 12"W x 12"L 14 lbs (6.4 kg)
X-161-1 31361-01 Balance Head 5.3 lbs (2.4 kg) Model Item No. Weight
X-161-99 31361-99 Bubble Device .75 lbs (.3 kg) T16P 30215 1 oz (.04 kg)

For more information visit us at www.kentool.com 28

Cap Nut Wrenches Wheel Cover Puller / Replacers
Llaves de tuercas ciegas Extractor/cambiadores de cubiertas
Clés à écrou borgne Extracteur de garde-roues/garde-roues
Ken-Tool Porkchop TM d'échange
Removes wheel covers quickly and easily without gouging or scratching
them. Rubber head T11RH prevents damage to hub cap and is replaceable.

Wrenches hold
outer cap nut on dual wheels while the inner nut is turned. Lip fits in hole
to secure wrench in place. Sizes offered fit standard and metric cap nuts.
Model Item No. Description Size Weight
TX9 ® 30609 SAE 1-1/2" .7 lbs (.3 kg)
TX10 30610 Metric 35 mm .7 lbs (.3 kg)
TX12 30612 Metric 41 mm .7 lbs (.3 kg)
Pro
Profesional
Combination Cap Nut Wrench Professionnel
Llave de tuercas ciegas de combinación
Clé à écrou borgne deux en un
Model Item No. Length Stock Weight
T67 31567 17-1/2" (45 cm) 9/16" (14.3 mm) 1.8 Ibs (.8 kg)

Standard
Estándar
Standard

Offers the versatility of two wrenches in one unique Model Item No. Length Stock Weight
product design. Fit one end onto the outer cap nut Combination T68 ® 31568 14" (36 cm) 7/16" (11.1 mm) 1.3 Ibs (.6 kg)
with the other end through the center hole. Wrench Cap Nut
slides underneath center disc of wheel, reducing
slipping during nut removal.
Wrench
Strap Winder
Enrollador de correa
Model Item No. Description Size Weight
TX50 30620 SAE & Metric 41 mm, 1-1/2" 1.3 lbs (.6 kg) Enrouleur de sangles
Patented design makes
Heavy-Duty Cap Nut Wrenches
strap winding quick and easy!
Llaves de tuercas ciegas de alta resistencia
Clés robustes à écrou borgne
PATENTED

Three Tools In One!

Quick Wind Quick Cheater Bar

PATENTED
Heavy-duty design will not slip out of position.
Heavy-Duty
Wrench rests snugly against the center hole,
Cap Nut
reducing the possibility of rim damage. Ideal Wrenches
for aluminum wheels.
Model Item No. Description Size Weight Quick Tire Check
TX200 30618 SAE 1-1/2" 2.6 lbs (1.2 kg)
TX241 30619 Metric 41 mm 2.6 lbs (1.2 kg)

Professional Lug Nut Cover Remover

Desmontador profesional de cubierta
con tuercas
Dégageur professionnel d'écrous Patented design allows fast and easy strap winding with one
d’enjoliveurs de roues hand. Use to quickly tighten ratchet straps. The perfect tire
Special coating will not scratch or damage knocker. Makes it easier to check the inside dual tire. Steel
chrome, painted, or coated lug nut covers. construction is durable and provides long lasting service.
Strap Winder for
Adjusts to fit larger lug nuts. Foam rubber grip is comfortable even after repeated use.
Trailers #39760
Item No. Weight Item No. Length Weight
30606 1.3 Ibs (.6 kg) 39760 19" 2.7 lbs (1.2 kg)

29 WARNING: Always wear safety goggles when using hand tools Top Seller
Four-Way Lug Wrenches Heavy-Duty Truck Lug Wrenches
Llaves cruz Llaves para camiones de alta resistencia
Clés à goujon à quatre têtes Clés à goujon pour camions lourds
Ken-Tool offers the world's largest selection of quality Use on heavy-duty trucks, buses, and tractors. Drop-forged
lug wrenches, available in sizes to fit all your tire changing or welded center provides strength and durability. T95,
needs - SAE and Metric. TM95,T95A, and TC95 wrenches have center hole for a
leverage bar. Socket sizes provided fit most metric or SAE
Professional
lug nuts on today's trucks. Stock: 1" (25 mm).
Lug Wrenches
Llaves profesionales
Clés à goujon T57
professionnelles “Our Best”

These wrenches are America’s premier professional lug wrenches for

cars, light trucks, SUV’s, RV’s, and vans. Drop-forged centers for extra T95
strength. Keep wrenches in trunk for emergencies or everyday use. “Our Best”

Model Item No. Description Socket Sizes Length Stock Weight

T56 35656 Passenger 17, 19, 21, 23" 5/8" 4 lbs
22 mm 58 cm 16 mm 1.8 kg Model Item No. Socket Sizes Length Weight
T57 ® 35657 Passenger 3/4", 13/16", 23" 5/8" 4.5 lbs T95 35695 1-1/16", 1-1/4", 1-1/2", 27-1/2" 13.8 lbs
7/8", 15/16" 58 cm 16 mm 2 kg SAE 13/16" square 70 cm 6.2 kg
TM95 35795 24, 27, 30, 33 mm 27-1/2" 13.5 lbs
Standard Lug Wrenches Metric 70 cm 6.1 kg
Llaves estándar
Clés à goujon standard
Welded center construction
for strength and durability. Combination wrench
T59
Premium grade, special bar fits SAE and metric.
quality steel for extra
strength.

Model Item No. Description Socket Sizes Length Stock Weight

T59 35659 Passenger 3/4", 13/16", 22" 5/8" 4.2 lbs
7/8", 15/16" 56 cm 16 mm 1.9 kg
T90 35690 Light Truck 7/8" deep well, 25" 3/4" 7.2 lbs
15/16", 1", 1-1/16" 64 cm 19 mm 3.2 kg

Economy Lug Wrenches

Llaves económicas 3/4" service arm that
Clés à goujon will take any standard
3/4" drive socket.
économiques
Model Item No. Socket Sizes Length Weight
These wrenches have fully
T61 TC95 35595 1-1/2", 13/16" square, 27-1/2" 14.2 lbs
welded centers which stand 30, 33 mm 70 cm 6.4 kg
up to everyday use.
T95A 35697 1-1/4", 1-1/2", 13/16" sq., 27-1/2" 13.5 lbs
3/4" SAE is also 19 mm.
3/4" service arm 70 cm 6.1 kg
Model Item No. Description Socket Sizes Length Stock Weight
T9520 35620 Passenger 3/4", 13/16", 20" 9/16" 3.4 lbs
7/8", 17 mm 51 cm 14 mm 1.5 kg
R23 35623 Passenger 3/4", 13/16", 20" 9/16" 3.8 lbs
7/8", 17 mm 51 cm 14 mm 1.7 kg
R24 35624 Passenger 17, 19, 21, 20" 9/16" 3.8 lbs
22 mm 51 cm 14 mm 1.7 kg
T61 35661 Passenger 3/4", 13/16", 22" 9/16" 3.8 lbs
7/8", 17 mm 56 cm 14 mm 1.7 kg
T62 35662 Passenger 3/4", 13/16", 18" 9/16" 3.2 lbs
7/8", 17 mm 46 cm 14 mm 1.5 kg
T63 35663 Passenger 17, 19, 21, 18" 9/16" 3.2 lbs
22 mm 46 cm 14 mm 1.5 kg Model Item No. Socket Sizes Length Weight
R20 35820 Passenger 17, 19, 21, 20" 9/16" 3.5 lbs T96 35696 1-1/16", 1-1/4", 1-1/2", 27-1/2" 13.5 lbs
22 mm 51 cm 14 mm 1.6 kg 13/16" square 70 cm 6.1 kg

Top Seller For more information visit us at www.kentool.com 30

Economy Four-Way Lug Wrenches Power Wrench
for the Do-It-Yourselfer Llave eléctrica
Llaves cruz económicas para aficionados Clé à chocs
Clés à goujon à quatre têtes économiques pour
le bricoleur
A complete line of lug wrenches value priced and TR52
merchandised to maximize your DIY business...
TR55
And they're all tough and dependable.
TR44SW Set
Passenger Car
Vehículo de pasajeros
Automobile
Designed for dual nut systems. Has 13/16" sq. end to hold inner nut,
Chrome-plated finish, welded center. Imported. with a 1-1/2" hex drive to spin outer nut off. Also adaptable to remove
Item No. Socket Sizes Length Stock Weight any nut size with a TR55 adapter. 3-to-1 ratio provides mechanical power
35630 17 mm (11/16"), 19 mm (3/4"), 20" 5/8" 3.7 lbs advantage necessary to remove any stubborn nut found on trucks, farm
21 mm (13/16"), 22 mm (7/8") 51 cm 16 mm 1.7 kg vehicles, buses, aircraft, and RV's. Tremendous power allows one man
operation. Heat-treated portable components for extra strength. All sockets
35635 17 mm (11/16"), 19 mm (3/4"), 14" 5/8" 2.6 lbs
are 3/4" drive.
21 mm (13/16"), 22 mm (7/8") 36 cm 16 mm 1.2 kg

Folding Passenger Car

Vehículo de pasajeros con
asientos plegables
Voiture automobile, pliable

Chrome-plated finish. Imported.

Set No. TR43 (34543) Basic Power Wrench Set
Item No. Socket Sizes Length Stock Weight Juego de llaves eléctricas básicas
35633 17 mm (11/16"), 19 mm (3/4"), 14" 9/16" 2.7 lbs
21 mm (13/16"), 22 mm (7/8") 36 cm 14 mm 1.2 kg
Jeu de clés à chocs de base
Weight: 19 Ibs. (8.6 kg)
Telescoping Passenger Car Set contains:
Automóvil de pasajeros Power Drive
con asientos extensibles TR45 (34543-02) 20-1/2" (52 cm) Bar Handle
TR46 (34543-03) 20" (51 cm) Tube Handle
Voiture automobile,
téléscopique Set No. TR44X (34545) Budd-Wheel Power Wrench Set
Chrome-plated finish. Imported. Juego de llaves eléctricas para ruedas tipo Budd
Item No. Socket Sizes Length Weight Jeu de clés à chocs pour roues à disque
35634 17 mm (11/16"), 19 mm (3/4"), 14" - 21" 3 lbs The 3/4" service adapter allows you to use any 3/4" drive socket.
21 mm (13/16"), 23 mm (7/8") 36 cm - 53 cm 1.4 kg Drive end is 1-1/2" hex. 13/16" square adapter for inner nut.
Weight: 20 Ibs. (9.1 kg)
Passenger Car Set contains:
Vehículo de Power Drive
pasajeros TR45 (34543-02) 20-1/2" (52 cm) Bar Handle
TR52 (34543-15) 13/16" Sq. Adapter
Automobile
TR53 (34543-16) 36" (91 cm) Tube Handle
Painted finish, welded center.
TR55 (34543-17) 3/4" Service Adapter
Item No. Socket Sizes Length Stock Weight
35637 17 mm (11/16"), 19 mm (3/4"), 18" 9/16" 3.6 lbs Set No. TR44SW (34547) Universal Power Wrench Set
21 mm (13/16"), 22 mm (7/8") 46 cm 14 mm 1.6 kg Juego de llaves eléctricas universales
Light Truck/RV Jeu de clés à chocs universelles
Weight: 29 Ibs. (13.2 kg)
Camión liviano/
Set contains:
vehículo de Power Drive
recreación TR45 (34543-02) 20-1/2" (52 cm) Bar Handle
Camionnette/VR TR53 (34543-16) 36" (91 cm) Tube Handle
Painted finish, welded center. TR52 (34543-15) 13/16" Square Adapter
TR55 (34543-17) 3/4" Service Adapter
Model Item No. Socket Sizes Length Stock Weight
Impact sockets:
R90 35627 7/8", 15/16", 1", 1-1/16" 23" 11/16" 5.5 lbs
S20 (30128) 7/8" S24 (30136) 1-1/8"
58 cm 17.5 mm 2.4 kg
S21 (30130) 15/16" S25 (30138) 1-3/16"
35638 22 mm (7/8"), 24 mm (15/16"), 23" 11/16" 5.6 lbs S23 (30134) 1-1/16" S33 (30133) 33 mm
25 mm (1"), 27 mm (1-1/16") 58 cm 17.5 mm 2.5 kg

31 WARNING: Always wear safety goggles when using hand tools Top Seller
 Double-End Truck Wrenches Extra Leverage 1-1/2" Lug Nut Wrench
Llaves dobles para camiones Llave de tuercas de rueda de 1-1/2"
Clés à double tête pour camions con mayor palanca
Clé pour écrou de roue de 1,5 po à
effet de levier supplémentaire
Use on trucks, buses, farm, and off-road vehicles. Great for on-the-road service.
Sizes available for all SAE and metric lug nuts. All wrenches are forged from 1" alloy Extends to 44"
steel for long lasting strength. Length: 16" (41 cm). Use TR5 truck wrench handle.

SAE • SOCIEDAD DE INGENIEROS AUTOMOTRICES (SAE) 25.5"

Model Item No. Sockets Sizes Weight
TR1 32501 1-1/8" with 13/16" Sq. x 1-1/2" 4.6 lbs (2 kg)
TR2 32502 1" with 5/8" Sq. x 1-1/4" 4.3 lbs (1.9 kg)
TR3 32503 7/8" x 1-1/16" 4.5 lbs (2 kg)
Break loose stubborn nuts.
TR3A 32505 1-1/16" x 1-1/8" 4.5 lbs (2 kg) CAUTION: Not for tightening!
TR3X 32506 1-3/16" x 1-1/16" 1-3/4" Stud Depth 4.6 lbs (2 kg) Original Military Version.
TR98 32508 1-1/2" x 13/16" Sq. 4.5 lbs (2 kg) Provides up to 700 ft-lbs of torque!
TR9 32509 1-1/4" x 1-1/16" 4.4 lbs (2 kg)
Item No. Length Socket Size Weight
Caterpillar and Bobcat equipment, and hub piloted wheels. NEW 34420 25.5" (64.7 cm) 1.5" Hex (3.8 cm) 14 lbs (6.4 kg)
NEW TR2A 32512 1" with 5/8" sq x 1-3/16" 4.5 lbs (2.0 kg) 44" Extended (111.7 cm) 1.24" Depth (3.1 cm)

METRIC • MÉTRICO • MÉTRIQUE Wrench Support Stand

Model Item No. Sockets Sizes Weight Base de soporte para llave
X TRM1 32551 17 mm sq. x 35 mm 4.5 lbs (2 kg)
Support de soutien pour clé
TRM2 32552 24 mm x 33 mm 4.4 lbs (2 kg)
TRM3 32553 27 mm x 30 mm 1-3/4" Stud Depth 4.6 lbs (2 kg) Commercial-duty stand used
TRM6 32556 21 mm sq. x 41 mm 4.5 lbs (2 kg) to support a double-end truck
TRM7 32557 30 mm x 33 mm 1-3/4" Stud Depth 4.6 lbs (2 kg) wrench, a 4-way lug wrench,
or a torque wrench, when
Metric inner and outer Budd nuts, and hub piloted wheels. removing or replacing lug
NEW TRM6A 32559 33 mm with 21 mm sq x 41 mm 4.5 lbs (2 kg) nuts. Adjusts from
X OBSOLETE Updated with longer stud clearance – 1-3/4" stud depth
14-1/2" to 22-1/2" high.
Rated to 300 pounds.
SAE / METRIC
SAE inner and outer Budd nuts, and hub piloted wheels. Wrench
Support
Model Item No. Sockets Sizes Weight Stand
NEW TR99 32519 33 mm with 13/16" sq x 1-1/2" 4.5 lbs (2 kg)
Item No. Weight
Heavy-Duty Truck Wrench 32610 5.5 lbs (2.5 kg)
Llaves para camiones de alta resistencia
Clé robuste pour camions No-Mar Rim Guard TM
Tapa para llantas No-Mar
Protection de jante antimarque

Use for off-the-road Budd-type wheels. Use TR11 handle.

Long length provides extra leverage. Stock: 1-1/4" (3.1 cm)

Model Item No. Length Socket Size Weight

TR10 34401 29-1/2" (75 cm) 1-3/4" Hex & 15/16" sq. 12.2 lbs (5.5 kg)

Truck Wrench Handle

Mango de llave para camiones
Manche de clé pour camions Protective cover prevents damage to chrome and aluminum rims and
wheels when removing or replacing lug nuts. Imprinted with torque sequence
number for proper torquing of disc wheels. Imported from Canada.
Item No. Description Weight
Heat-treated for strength and durability. 30605 Protective plastic cover .5 lbs (.2 kg)
Fits all Ken-Tool Double-end truck
wrenches
Model Item No. Length Stock Weight
TR5 32318 22" (56 cm) 3/4" Hex 3 lbs (1.4 kg)
TR11 34402 30" (76 cm) 1" Round 6.7 lbs (3 kg)
NEW TR5A 32319 30" (76 cm) 3/4" Hex 4 lbs (1.8 kg)

Top Seller For more information visit us at www.kentool.com 32

 TIRE & WHEEL SERVICE CENTERS
Featuring Ken-Tool’s most popular tire tool products!
Eye-catching 15" x 17" full color display card with photos and descriptions!
Convenient mobile base makes positioning for optimum sales a breeze!
Besides featuring Ken-Tool’s most popular tire tool products, these new merchandisers attract
attention! Featuring large 15" x 17" color display cards at eye level with high-res color photos
and descriptions of some of our best selling products. Each photo has a box so that a 1" x 2.5"
barcode price label can be added.
The sturdy 12" x 16" freestanding, powder-coated wire rack features bright color graphics to
let your customers know they are buying Ken-Tool’s professional quality tire tools and lug
wrenches. Included at no extra cost is a 3" high 4-wheel dolly with strong and durable caster
wheels to enable the loaded rack to be easily moved to different locations and to facilitate floor
cleaning. The rack and dolly take up a small 15" x 16" footprint and can be placed on the floor
or, without the dolly, on a standard 18” gondola base shelf.

Tire & Wheel Service Center No. 36047

Centro de mantenimiento para ruedas y llantas No. 36047
Centre de service pneus et roues no 36047
Set No. 36047 Weight: 125 Lbs (57 kg) Shipped in 5 boxes.
Set Includes:
Item No. Description Quantity
35110 18" 35110 USA Hickory Tire Knocker 2
32119 24" T19 Straight Tire Spoon 2
33220 30" T20A Curved Tire Spoon 2
34645 37" T45A® Tubeless Tire Iron 2
34645C 37" T45AC® Classic Tubeless Tire Iron 2
34647 41" T45HD HD Tubeless Tire Iron 2
34747 36" T46A Tubeless Tire Iron 2
35323 16-1/2" T35 HD Tire Hammer, Wood Handle 1
35429 32" TG11E Bead Breaking Wedge, Fiberglass Handle 1
35637 18" 35637 Passenger 4-Way Lug Wrench, SAE/Metric 2
35638 23" 35638 Light Truck/RV 4-Way Lug Wrench, SAE/Metric 2
35595 27" TC95 HD Truck Lug Wrench, Popular Lug Sizes 1
30721 Wire Rack with Roller Base 1
36047-98 Planogram Card with Tie Strap 1

Passenger Tire & Wheel Service Center No. 36049

Centro de mantenimiento para ruedas y llanta de automóviles No. 36049
Centre de service pneus et roues pour occupant no. 36049
Set No. 36049 Weight: 120 Lbs (54 kg) Shipped in 4 boxes.
36047 Set Includes:
Item No. Description Quantity
33220 30" T20A Curved Tire Spoon 2
34645 37" T45A® Tubeless Tire Iron 2
35429 32" TG11E Bead Breaking Wedge, Fiberglass Handle 1
34645C 37" T45AC® Classic Tubeless Tire Iron 2
34747 36" T46A Tubeless Tire Iron 2
35110 18" 35110 USA Hickory Tire Knocker 2
35620 20" T9520 4-Way Lug Wrench 1
35657 23" T57 4-Way Lug Wrench 1
35659 22" T59 4-Way Lug Wrench 2
35663 18" T63 Metric 4-Way Lug Wrench 1
34647 41" T45HD HD Tubeless Tire Iron 2
30721 Wire Rack with Roller Base 1
36047-98 Planogram Card with Tie Strap 1 Top Seller

KEN-TOOL • 768 E. North Street, Akron, OH 44305

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
33 E-mail: sales@kentool.com • www.kentool.com
Professional Tire Tool and Lug Wrench Merchandisers
Comerciantes de llaves y herramientas para llantas profesionales
Présentoirs de clés à goujon et de démonte-pneus professionnels
Ken-Tool offers a simple, yet effective way to merchandise our top products. With assortment
#36046 you get 15 of ourbest selling tools. Assortment #36045 offers a larger assortment of 20
equally fast-selling tire and wheel service tools. Both assortments come complete with a sturdy,
freestanding wire rack (no assembly required). The graphics on the front of the rack let your
customer know they’re buying professional quality tire tools and lug wrenches from Ken-Tool
while the userfriendly design of the rack lets you know you found the solution to displaying
35648 Ken-Tool products. Both the wire rack and planogram card can be purchased separately.
10 Piece Lug Wrench Assortment with rack No. 35649
10 piezas. Surtido de llaves para ruedas con soporte No. 35649
Jeu de clés à goujon avec râtelier de 10 pièces no 35649
Set No. 35648 Weight: 50 Lbs (23 kg). Set Includes:
Item No. Description Quantity
35620 20" T9520 4-Way Wrench 2
35636 23" T56 Deluxe Metric 4-Way Wrench 1
35657 23" T57 4-Way Lug Nut Wrench 2
35659 22" T59 4-Way Lug Nut Wrench 2
35663 18" T63 Metric 4-Way Wrench 1
35690 25" T90 4-Way Wrench - Truck 2
35649 Empty Display Stand 1
Deluxe Tire & Wheel Service Center No. 36045
Centro de mantenimiento para ruedas y llantas de lujo No. 36045
Centre de service de luxe pneus et roues no 36045
Set No. 36045 Weight: 128 Lbs (58 kg). Set Includes:
Item No. Description Quantity
32318 22" TR5 Truck Wrench Handle/Leverage Bar 2
32501 16" TR1 1-1/8"" Hex with 13/16"" Sq. x 1-1/2
Hex Double-End Wrench 1
32508 16" TR98 1-1/2"" Hex x 13/16"" Sq. Double-End Wrench 1
32509 16" TR9 1-1/4"" Hex x 1-1/16"" Hex Double-End Wrench 1
32552 16" TRM2 24 mm x 33 mm Double-End Wrench" 1
33220 30" T20A Curved Tire Spoon 2
33223 30" T23A Truck Lock Ring Removal Tool 1
36045
34645 37" T45A Truck Tire Mount/Demount Iron 2
34647 41" T45HD Truck Tire Mount/Demount Iron 1
35229 31" TG11EH Fiberglass Replacement Handle (fits 35429) 1
35323 16.5" T35 Hickory Handled Tire Hammer 1
35429 32" TG11E Fiberglass Handled Bead Breaking Wedge 1
35690 25" T90 Light Truck 4-Way, Welded - SAE 2
35595 27" TC95 Heavy-Duty Truck 4-Way, Drop-Forged - SAE 2
35924 46" T24B Slide-Action, Impact Bead Breaker 1
30720 Wire Rack 1
36045-10 Planogram Card with Tie Strap 1
Tire & Wheel Service Center No. 36046
Centro de mantenimiento para ruedas y llantas No. 36046
Centre de service pneus et roues no 36046
Set No. 36046 Weight: 73 Lbs (33 kg). Set Includes:
Item No. Description Quantity
32116 16" Small Tire Mount/Demount Spoon 2
33220 30" T20A Curved Tire Spoon 1
33223 30" T23A Truck Lock Ring Removal Tool 1
34645 37" T45A Truck Tire Mount/Demount Iron 2
35129 30" T11EH Hickory Replacement Handle (fits 35329) 1
35229 31" TG11EH Fiberglass Replacement Handle (fits 35429) 1
35429 31" TG11E Fiberglass Handled Bead Breaking Wedge 1
36046 35620 20" T9520 Economy Passenger Car 4-Way - SAE 1
35657 23" T57 Professional Gold Passenger Car 4-Way - SAE 1
35659 22" T59 Professional Passenger Car 4-Way - SAE 1
35663 18" T63 Economy Passenger Car 4-Way - Metric 1
35690 25" T90 Light Truck 4-Way, Welded - SAE 1
35695 27" T95 Heavy-Duty Truck 4-Way, Drop-Forged - SAE 1
30720 Wire Rack 1
36046-10 Planogram Card with Tie Strap 1

For more information visit us at www.kentool.com 34

 Tire Inflation Cages • Cajas para inflado de llantas • Cages de sécurité pour gonflement de pneus
Mandatory for any shop working with tubeless and multi-piece rims. **For reference
Made from heavy-gauge steel tubing welded to a steel base. Guards Work safely. only. Height A refers
against blown lock rings and rims. Follow OSHA regulation 29-CFR Part Always use an inflation cage
to the approximate
1910.177. Read safety label on cage. Designed to meet OSHA regulation when inflating tires.
height to the inside
requirements for Medium, Heavy-Duty Truck, OTR, Tractor, and Super Follow OSHA regulation B A**
bend of the cage. Why Tire
Singles. Ken-Tool offers sizes and designs for all your needs. For 29-CFR Part 1910.177
May accommodate Cages are
whenever changing tires.
additional safety labels or instructions, call Ken-Tool customer service. taller tires. Important

Passenger and Light Truck Cage

Jaula para camión liviano y para pasajeros
Cabine passager et véhicule utilitaire léger Tall 3-Bar Cage (OTR and Farm)
A must for run-flat, low-profile, and Caja de 3 barras
other tires that are difficult to seat. (de carretera / vehículos de granja)
Model Item No. Height A** Width B Base Height Max. PSI Weight Cage à 3 barres
T103 36003 30" 16" 21-1/2" x 22" 40-1/2" 130 80 lbs
76 cm 41 cm 55 cm x 56 cm 103 cm 36.2 kg
(pneus tout terrain/ tracteurs)
Model Item No. Height A** Width B Base Height Max. PSI Weight
Portable Wide Base and Standard 2-Bar Cages T104 36004 65" 24" 30" x 27" 77-1/2" 130 158 lbs
Caja de dos barras con base 165 cm 61 cm 76 cm x 69 cm 197 cm 72.6 kg
amplia portátil
Cage portative à deux barres,
à base large
Designed for wide base truck tires, the
T101A portable inflation cage will hold
super singles, and super wide radial tires.
Fits comparable tires up to: 455/55R22.5.
T101 fits standard truck tires.
Model Item No. Height A** Width B Base (closed) Height Max. PSI Weight
T101A 36007 43-1/2" 20-1/2" 7" x 27" 56-1/2" 130 72 lbs 36009 36010 36019
111 cm 52 cm 18 cm x 69 cm 143 cm 32.6 kg NEW MagnumTM NEW SuperMagnum TM NEW Portable
T101 36001 41" 16" 7" x 21-1/2" 51-1/2" 130 60 lbs
5-Bar Cage 5-Bar Cage MagnumTM
104 cm 41 cm 18 cm x 55 cm 131 cm 27.2 kg
Caja de 5 barras Magnum Caja de 5 barras SuperMagnum 2-Bar Cage
Truck and Off-Road Tire Cages Cage à 5 barres Magnum Cage à 5 barres SuperMagnum Caja de 2 barras
portátil Magnum
MagnumTM & SuperMagnumTM Item No.
SuperMagnumTM Cage portative
36010 with steel mesh
Zipper à 2 barres Magnum
Explosion diffuses 93% of blast force
Trials from zipper rupture!
Designed to accept the new generation of Super Single and Super Wide-Base
truck tires with their higher inflation pressures and air volumes.
Item Height Width Max.
Model No. Description A** B Base Height PSI Weight
36002 36005 36006 NEW T109 36009 5-Bar MagnumTM 41-1/2" 24-1/2" 48" x 30" 55" 130 211 lbs
4-Bar Cage 5-Bar Cage 3-Bar Cage 105 cm 62 cm 122 cm x 76 cm 140 cm 96 kg
NEW T110 36010 5-Bar 41-1/2" 24-1/2" 48" x 30" 55" 130 248 lbs
Caja de 4 barras Caja de 5 barras Caja de 3 barras SuperMagnumTM 105 cm 62 cm 122 cm x 76 cm 140 cm 112.7 kg
Cage à 4 barres Cage à 5 barres Cage à 3 barres NEW T119 36019 2-Bar Portable 49-1/2" 24-1/2" 7" x 30" closed 64" 130 80 lbs
MagnumTM 126 cm 62 cm 18 cm x 76 cm 163 cm 36.2 kg

NEW Earthmover Tire Inflation Cage

Jaula de inflado para neumáticos de excavadoras
36008
Cage de gonflage de pneu d'engin de génie civil
7-Bar Cage NEW
“World’s Largest Single-Piece Inflation Cage”
Caja de 7 barras
HD all steel cage protects workers,
Cage à 7 barres equipment and facilities. For large
Earthmover & Agricultural tires.
New patent pending design; with
10-bar construction. Fits up
Item Height Width Max.
Model No. Description A** B Base Height PSI Weight to 29.5R25 L-3 Earthmover. PATENT
T102 36002 4-Bar Cage 43-1/2" 20-1/2" 31-1/2" x 26" 56-1/2" 130 146 lbs PENDING
111 cm 52 cm 80 cm x 66 cm 143 cm 66.2 kg Watch our
EXPLOSION TESTING VIDEO
T105 36005 5-Bar Cage 43-1/2" 20-1/2" 41" x 26" 56-1/2" 130 182 lbs
at 150-psi on ww.kentool.com
111 cm 52 cm 104 cm x 66 cm 143 cm 82.5 kg
T106 36006 3-Bar Cage 43-1/2" 20-1/2" 26" x 22" 56-1/2" 130 134 lbs
111 cm 52 cm 66 cm x 56 cm 143 cm 60.7 kg NEW Model Item No. Height A** Width B Base Height Max. PSI Weight
T108 36008 7-Bar Cage 46" 29" 34" x 56" 63" 130 485 lbs NEW T111 36011 77-1/2" 42" 72" x 48" 90-1/2" 100 820 lbs
117 cm 74 cm 86 cm x 142 cm 160 cm 220 kg 193 cm 107 cm 183 cm x 122 cm 230 cm 372 kg

35 WARNING: Always wear safety goggles when using hand tools Top Seller
Truck Tire Changing Stand EZ Tire RotatorTM
Soporte para cambio de llantas de camiones Rotador de neumáticos EZ Tire Rotator TM
Support de démontage pour pneus de camions Rotateur de pneu EZ Tire Rotator TM
Quickly rotate assembly inside cage for easy valve access
— no more hassle!
Reduces handling, back strain and user fatigue; increases safety.
Easily installed or moved to another cage – no fastening required.
No assembly required, simply place in the center of the cage.
Works as a portable tread inspection and stone removal station outside of
cage. Features heavy-duty 2" ball-bearing steel rollers and 1-1/4" thick steel
stock for long service. Boxed and UPS shippable.

Stand handles wheels or open rims 16.5" to 24". Double-slide adjustment with
locking device prevents twisting so it stays aligned with the wheel or rim.
Stand is the ideal height for driving off beads or demounting tires. It must be
used to be appreciated.
36014
Model Item No. Weight PATENTED
T115 36015 21 lbs (9.5 kg)

Easy-LiftTM Bead Seating Stand

Soporte para calzado de talón Easy-Lift TM
Poste de portée de talon Easy-Lift TM
SAFETY FIRST!
Fits any Ken-Tool ® 3-Bar, 4-Bar and 5-Bar Inflation Cage,
ERGONOMIC: plus many competitive cages
Easy operation with less back Model Item No. Description Length Weight
strain. Makes concentric bead NEW T114 36014 EZ Tire RotatorTM 17-1/2" x 25-1/2" (44.5 cm x 16 lbs
seating safe and easy! 64.8 cm) x 2-1/2" (6.6 cm) (7.3 kg)

EZ Tire Rotator TM with Ramp

Rotador de neumáticos EZ Tire Rotator TM con rampa
Rotateur de pneu EZ Tire Rotator TM avec rampe
EasyLiftTM Model Item No. Description Length Weight
Bead Seating Stand
NEW T118 36018 EZ Tire RotatorTM 25" x 25" (64 cm x 64 cm) 21 lbs
with Ramp x 2-5/8" (6.6 cm) (9.5 kg)
PATENTED
Magnum EZ Tire Rotator TM with Ramp
Rotador de neumáticos Magnum EZ Tire Rotator TM con rampa
Rotateur de pneu Magnum EZ Tire Rotator TM avec rampe

Push tubeless assembly onto crown – 36013

tire and wheel will automatically fall
PATENTED
onto center of stand and rest with bead After seating bead step around stand and
centered on bottom wheel flange easily lift assembly into vertical position
Fits Ken-Tool ®
ERGONOMIC: Reduces back strain while handling 22.5" tubeless tire & wheel Magnum and SuperMagnum Inflation Cages
assemblies. Aligns beads concentrically on wheel for improved ride & longer
Ramp lifts tire onto rollers with ease.
tire life. Portable for field service, or can be bolted to the floor. Made of high
grade steel. Length: 24" high x 26" wide x 27" long. Model Item No. Description Length Weight
NEW T113 36013 Magnum EZ Tire RotatorTM 25" x 28" (64 cm x 71 cm) 22 lbs
Model Item No. Description Weight
with Ramp x 2-5/8" (6.6 cm) (10 kg)
T116 36016 Standard Crown for 8-3/4" diameter hubs 36 lbs (16.4 kg)
T117 36017 Large Crown for 11" Euro hubs 37 lbs (16.8 kg) Have a new idea? E-mail sales@kentool.com
TIRE INFLATION CAGES:
WARNING: Tire changing can be dangerous, and should be done only by trained personnel using proper WARNING: Do not alter cage in any way. Cage must be freestanding and
tools and equipment as directed by Federal OSHA Standard No. 29 CFR Part 1910.177. Tires may explode at least three feet from other objects. Discard cage if bent, cracked, or
during inflation causing injury to operator or bystander. Wear safety goggles. Keep all parts of body otherwise damaged. Always wear safety goggles.
outside cage. Use extension hose, clip-on chuck, and remote valve. See supervisor for safety procedures.

For more information visit us at www.kentool.com 36

 ®

BEARING & ROTOR PULLING SYSTEM

SISTEMA DE TRACCIÓN DE ROTORES Y RODAMIENTOS
SYSTÈME D'EXTRACTION DE
ROTORS & DE COUSSINETS

Includes everything you

need to do the job!

HubShark® Demo

Replace the front wheel bearings on

front wheel drive vehicles without
removing the steering knuckle from
the vehicle – in about 20 minutes
per wheel.
• Keep more jobs in house - don’t send bearings
out to be machine pressed
• Save time and money with reduced down time
• Pull and press any hub or bearing on domestic
and import vehicles
• Pull inner bearing race from the hub
• Done completely on vehicle - no need to remove
the knuckle assembly and re-align the front end
• Always be sure the center screw thread is clean
and well lubricated
• Always wear safety goggles
• See www.kentool.com for instruction manual
and parts list
Item No. Description Weight
7326 Pro Super Hub-Shark System® 58 lbs (26.3 kg)
No. 7326U Upgrade Kit available
for previous Hub-Shark TM owners (case included)

37 WARNING: Always wear safety goggles when using hand tools Top Seller
 Professional Mechanic’s Vises
Tornillos de banco para taller profesionales
All of Ken-Tool’s
Étaux pour ateliers
Professional Vises feature: professionnels
• 360º swivel base
• Machined base plate for smooth swivel
• Heavy-duty jaw beam covers screw
• Built-in anvils

K65 6-1/2"

With high quality construction for extra durability and full-strength performance at
any jaw opening, these vises are made for the professional - strong, durable, and
built to last.
• Jaw faces have "V" notches • Built-in pipe jaws
for vertical gripping Item Jaw Jaw Throat Pipe Jaw Replacement
Model No. Width Opening Depth Capacity Weight Jaw Set No.
• "V" notched, replaceable/reversible jaws made of carbon steel and K55 64055 5-1/2" 7-1/2" 3-1/4" 1/8" - 2-1/2" 27 lbs 15505
heat-treated for extra strength, diamond cut on one side - smooth 14 cm 19.1 cm 8.3 cm .3 - 6.4 cm 12.3 kg
on the other K65 64065 6-1/2" 9" 3-7/8" 1/8" - 3-1/2" 38 lbs 16505
16.5 cm 22.9 cm 9.8 cm .3 - 8.9 cm 17.3 kg
• Gear-type locking
system with
double lock-down
Professional Reversible Mechanic’s Vises
bolts - locks vise Tornillos de banco reversibles para mecánicos
securely in position profesionales
Étaux professionnels réversibles de mécanicien
2 Built-in anvils
provide more
work surface
area than
any other
vise

Professional Reversible Mechanic’s Vises feature:

It's simple...Remove the jaw from the front of the base,
swivel the base 180º, then re-insert the jaw:
KT4800 8"
2 Built-in anvils
provide more work With our Reversible Vises you get all of the high quality features and rugged durability
surface area than
of the Pro Workshop Vises, and more! Significantly increase your gripping capacity
any other vise
when you reverse the position of the front jaw.
Item Jaw Jaw Throat Pipe Jaw Replacement
Model No. Width Opening Depth Capacity Weight Jaw Set No.
Standard Position
KT4650 64650 6-1/2" 9" - 12" 4" 1/8" - 4" 52 lbs 14655
16.5 cm 22.9 - 30.5 cm 10.1 cm .3 - 10.1 cm 23.6 kg
KT4800 64800 8" 11 - 14" 4-7/8" 1/8" - 4-1/4" 74 lbs 14805
20.3 cm 28 - 35.6 cm 12.4 cm .3 - 10.8 cm 33.6 kg

Professional C-Clamps
Reverse Position Abrazaderas en C profesionales
Serre-joints en C professionnels
This c-clamp is for the professional. Designed
for strength and toughness, with sliding pin han-
dle and acme-thread screw. Imported.

Model Item No. Jaw Opening Depth Screw Diameter Weight

KT-4 39604 4" (10 cm) 2-1/16" (5 cm) 5/8" (1.5 cm) 1.8 lbs (.8 kg)
KT-6 39606 6" (15 cm) 2-3/4" (7 cm) 5/8" (1.5 cm) 2.5 lbs (1.1 kg)
KT-8 39608 8" (20 cm) 3-1/4" (8 cm) 3/4" (2 cm) 3.5 lbs (1.6 kg)

Top Seller For more information visit us at www.kentool.com 38

 TORQUE MASTER® Torque Limiting Sockets
Llaves de tubo limitadoras del par motor principal • Douilles de limitation de couple TORQUE MASTER
For foreign and domestic cars and light trucks. Tighten nuts to factory specifications each time the wheels are
replaced. Color and letter coded for quick size and torque reference. Converts any impact gun, including those with
an extended anvil, into an instant torque wrench by bleeding torque off the impact gun. Application chart can be
wall mounted. Application Charts No. 30199 and No. 30299 are also available separately. Limited lifetime warranty.

TORQUE MASTER® TORQUE MASTER® Twelve Piece Kit

Four Piece Starter Kit Juego de doce piezas
Equipo básico de cuatro piezas Kit douze pièces
kit de base de quatre pièces Set contains:
Set contains: 30181 - Brown (A) 100 ft/lbs.
30182 - Orange (B) 80 ft/lbs.
30181 - Brown (A) 100 ft/lbs.
30183 - Gray (C) 100 ft/lbs.
30183 - Gray (C) 100 ft/lbs.
30184 - Black (D) 60 ft/lbs.
30185 - Blue (E) 80 ft/lbs.
30185 - Blue (E) 80 ft/lbs.
30189 - White (I) 120 ft/lbs.
30186 - Yellow (F) 65 ft/lbs.
Item No. Weight 30187 - Red (G) 80 ft/lbs.
30174 4.4 lbs (2 kg) 30188 - Dark Green (H) 45 ft/lbs.
30189 - White (I) 120 ft/lbs.
TORQUE MASTER® Six Piece Kit 30200 - Aqua (Q) 140 ft/lbs.
30202 - Navy Blue (Y) 100 ft/lbs.
Juego de seis piezas 30213 - Gold (NN) 90 ft/lbs.
Kit six pièces Item No. Weight
Set contains: 30190 10.5 lbs (4.8 kg)
30181 - Brown (A) 100 ft/lbs.
30183 - Gray (C) 100 ft/lbs. TORQUE MASTER® Four Piece Torque Stick Set for
30184 - Black (D) 60 ft/lbs.
30185 - Blue (E) 80 ft/lbs.
SUV’s Most Popular Sizes for Largest Growing Market
30186 - Yellow (F) 65 ft/lbs. Juego de palancas de par motor de cuatro piezas
30189 - White (I) 120 ft/lbs. para los tamaños más populares de vehículos todo t
Item No. Weight erreno para el mayor mercado en crecimiento
30176 6.9 lbs (3.1 kg) Kit de quatre bras de torsion convenant aux
VUS de dimensions les plus populaires idéal pour un marché
TORQUE MASTER® Nine Piece Kit de plus en plus grand
Juego de nueve piezas For domestic and foreign SUV's. Tighten lug
Kit neuf pièces nuts to factory specifications. Color and letter
Set contains: coded for quick size and torque reference.
30181 - Brown (A) 100 ft/lbs. Set contains:
30182 - Orange (B) 80 ft/lbs. 30181 - Brown (A) 100 ft/lbs.
30183 - Gray (C) 100 ft/lbs. 30183 - Gray (C) 100 ft/lbs.
30184 - Black (D) 60 ft/lbs. 30200 - Aqua (Q) 140 ft/lbs.
30185 - Blue (E) 80 ft/lbs. 30204 - Turquoise (BB) 150 ft/lbs.
30186 - Yellow (F) 65 ft/lbs.
Item No. Weight
30187 - Red (G) 80 ft/lbs.
30188 - Dark Green (H) 45 ft/lbs. 30175 4.5 lbs (2 kg)
30189 - White (I) 120 ft/lbs.
Item No. Weight
TORQUE MASTER® Torque Extension Kits
30179 8.75 lbs (4 kg) Juegos de extensiones para torque
Kits de rallonges de couple
TORQUE MASTER® Ten Piece Kit Convert your own sockets into torque sockets.
Juego de diez piezas
TORQUE MASTER® Four Piece Extension Kit
Kit dix pièces
for Passenger Car - 1/2" Drive
Set contains:
30181 - Brown (A) 100 ft/lbs. Juego de extensión de cuatro piezas para automóviles
30182 - Orange (B) 80 ft/lbs. de pasajeros – entrada de 1/2 pulgada
30183 - Gray (C) 100 ft/lbs. Kit de rallonge de quatre pièces pour
30184 - Black (D) 60 ft/lbs.
30185 - Blue (E) 80 ft/lbs.
automobiles - Prise 1/2 po
30186 - Yellow (F) 65 ft/lbs. Set contains:
30187 - Red (G) 80 ft/lbs. 30223 - Gray (C) 100 ft/lbs
30188 - Dark Green (H) 45 ft/lbs. 30225 - Blue (E) 80 ft/lbs
30189 - White (I) 120 ft/lbs. 30226 - Yellow (F) 65 ft/lbs
30200 - Aqua (Q) 140 ft/lbs. 30229 - White (I) 120 ft/lbs
Item No. Weight Item No. Weight
30180 9.5 lbs (4.3 kg) 30234 3 lbs (1.3 kg)

39 WARNING: Always wear safety goggles when using hand tools

TORQUE MASTER® TORQUE MASTER®
Five Piece Extension Kit for Passenger Car - 1/2" Drive Ten Piece Extension Kit for Passenger Car & Light Truck
Juego de extensiones de cinco piezas para automóviles. Juego de extensiones de diez piezas para automóviles
Cuadro de 1/2" y camiones livianos
Kit (cinq pièces) de rallonges pour voitures - Kit (dix pièces) de rallonges pour
prise demi pouce voitures et camions légers
Set contains:
Set contains:
30220 - Aqua (Q) 140 ft/lbs.
30220 - Aqua (Q) 140 ft/lbs. 30223 - Gray (C) 100 ft/lbs.
30223 - Gray (C) 100 ft/lbs. 30224 - Black (D) 60 ft/lbs.
30225 - Blue (E) 80 ft/lbs. 30225 - Blue (E) 80 ft/lbs.
30226 - Yellow (F) 65 ft/lbs. 30226 - Yellow (F) 65 ft/lbs.
30229 - White (I) 120 ft/lbs. 30228 - Dark Green (H) 45 ft/lbs.
Item No. Weight 30229 - White (I) 120 ft/lbs.
30235 4 lbs (1.8 kg) 30248 - Light Purple (K) 110 ft/lbs.
30249 - Neon Yellow (OO) 75 ft/lbs.
30247 - Gold (NN) 90 ft/lbs.
Item No. Weight
30251 7.6 lbs (3.5 kg)

TORQUE MASTER® TORQUE MASTER®

Individual Sockets & Extensions Individual Torque Extensions
Extensiones de torsión individuales
Dados y extensiones individuales Rallonges de couple individuelles
Douilles individuelles et rallonges Drive Size Torque
®
Item No. Description Socket/Opening Limit Weight
TORQUE MASTER 30255 Black Oxide (A) 3/8" 30 ft-Ibs .5 lbs (.2 kg)
Individual Sockets 30256 Black Oxide (B) 3/8" 40 ft-Ibs .5 lbs (.2 kg)
30257 Black Oxide (C) 3/8" 50 ft-Ibs .5 lbs (.2 kg)
Dados individuales
30258 Black Oxide (D) 3/8" 60 ft-Ibs .5 lbs (.2 kg)
Douilles individuelles 30219 Orange (B) 1/2" 160 ft-Ibs .7 lbs (.3 kg)
30220 Aqua (Q) 1/2" 140 ft-Ibs .7 lbs (.3 kg)
WC 30199 30221 Light Blue (S) 1/2" 55 ft-Ibs .7 lbs (.3 kg)
Socket Torque 30223 Gray (C) 1/2" 100 ft-Ibs .7 lbs (.3 kg)
Item No. Description Opening Limit Weight 30224 Black (D) 1/2" 60 ft-lbs .7 lbs (.3 kg)
30181 Brown (A) 13/16" 100 ft-Ibs .5 lbs (.2 kg) 30225 Blue (E) 1/2" 80 ft-Ibs .7 lbs (.3 kg)
30182 Orange (B) 21 mm 80 ft-Ibs .5 lbs (.2 kg) 30226 Yellow (F) 1/2" 65 ft-Ibs .7 lbs (.3 kg)
30183 Gray (C) 19 mm (3/4") 100 ft-Ibs .5 lbs (.2 kg) 30227 Fuchsia (LL) 1/2" 175 ft-lbs .7 lbs (.3 kg)
30184 Black (D) 21 mm 60 ft-Ibs .5 lbs (.2 kg) 30228 Dark Green (H) 1/2" 45 ft-Ibs .7 lbs (.3 kg)
30185 Blue (E) 19 mm (3/4") 80 ft-Ibs .5 lbs (.2 kg) 30229 White (I) 1/2" 120 ft-Ibs .7 lbs (.3 kg)
30186 Yellow (F) 19 mm (3/4") 65 ft-Ibs .5 lbs (.2 kg) 30243 Turquoise (G) 1/2" 150 ft-Ibs .7 lbs (.3 kg)
30187 Red (G) 17 mm 80 ft-Ibs .5 lbs (.2 kg) 30244 Bright Green (T) 1/2" 135 ft-Ibs .7 lbs (.3 kg)
30188 Dark Green (H) 17 mm 45 ft-Ibs .5 lbs (.2 kg) 30247 Gold (NN) 1/2" 90 ft-Ibs .7 lbs (.3 kg)
30189 White (l) 7/8" 120 ft-Ibs .5 lbs (.2 kg) 30248 Light Purple (K) 1/2" 110 ft-Ibs .7 lbs (.3 kg)
30195 Tan (J) 1" 140 ft-Ibs .5 lbs (.2 kg) 30249 Neon Yellow (OO) 1/2" 75 ft-Ibs .7 lbs (.3 kg)
30196 Light Purple (K) 17 mm 110 ft-Ibs .5 lbs (.2 kg) 30250 Green (L) 1/2" 170 ft-Ibs .7 lbs (.3 kg)
30197 Green (L) 1" 170 ft-Ibs .5 lbs (.2 kg)
30198 Crimson Red (V) 1-1/16" 140 ft-Ibs .5 lbs (.2 kg)
TORQUE MASTER®
30200 Aqua (Q) 7/8" 140 ft-Ibs .5 lbs (.2 kg) Individual Heavy-Duty Truck Torque Extensions
30201 Bright Green (T) 15/16" 135 ft-Ibs .5 lbs (.2 kg) Extensiones de torsión individuales de alta
30202 Navy Blue (Y) 7/8" 100 ft-Ibs .5 lbs (.2 kg)
resistencia para camiones
30203 Light Tan (Z) 7/8" 65 ft-Ibs .5 lbs (.2 kg)
30204 Turquoise (BB) 21 mm 150 ft-Ibs .5 lbs (.2 kg) Rallonges individuelles robustes de couple
30205 Light Pink (CC) 17 mm 90 ft-Ibs .5 lbs (.2 kg) pour camions
30206 Sky Blue (DD) 21 mm 100 ft-Ibs .5 lbs (.2 kg) Convert your own sockets into torque
30207 Safety Purple (EE) 22 mm 140 ft-Ibs .5 lbs (.2 kg) sockets for use on commercial,
30208 Yellow Gray (FF) 19 mm 180 ft-Ibs .5 lbs (.2 kg) heavy-duty trucks, and buses.
30211 Quartz Gray (KK) 19 mm 120 ft-Ibs .5 lbs (.2 kg) Drive Size Torque
30212 Fuchsia (LL) 22 mm 175 ft-Ibs .5 lbs (.2 kg) Item No. Description Socket/Opening Limit Weight
30213 Gold (NN) 19 mm 90 ft-Ibs .5 lbs (.2 kg) 30230 Yellow (O) 3/4 " 175 ft-Ibs .75 Ibs (.3 kg)
30214 Salmon (QQ) 22 mm 95 ft-Ibs .5 lbs (.2 kg) 30231 Yellow (N) 3/4 " 250 ft-Ibs .75 Ibs (.3 kg)
30216 Deep Purple (UU) 14 mm 75 ft-Ibs .5 lbs (.2 kg) 30232 Yellow (U) 3/4 " 350 ft-Ibs .75 Ibs (.3 kg)
30217 Vanilla (XX) 13/16" 160 ft-Ibs .5 lbs (.2 kg) 30233 Yellow (M) 3/4 " 475 ft-Ibs .75 Ibs (.3 kg)
30218 Honey Yellow (JJ) 19 mm 145 ft-Ibs .5 lbs (.2 kg) 30236 Yellow (T) 1" 175 ft-Ibs 1 Ib (.5 kg)
30222 Silver Sparkle (SS) 21 mm 110 ft-lbs .5 lbs (.2 kg) 30237 Yellow (R) 1" 250 ft-Ibs 1 Ib (.5 kg)
30199 11" x 17" Application Wall Chart (WC) .5 lbs (.2 kg) 30238 Yellow (S) 1" 350 ft-Ibs 1 Ib (.5 kg)
30299 22" x 24" Laminated Socket Torque Wall Chart .5 lbs (.2 kg) 30239 Yellow (P) 1" 475 ft-Ibs 1 Ib (.5 kg)
WARNING: Torque sockets and truck torque extensions cannot be used to take 30240 Yellow (W) 1" 650 ft-Ibs 1 Ib (.5 kg)
off wheel nuts. Calibrate your impact gun and follow all manufacturers' 30241 Yellow (Q) 1" 300 ft-Ibs 1 Ib (.5 kg)
recommended procedures when using Torque Master products. 30242 Yellow (Y) 1" 550 ft-Ibs 1 Ib (.5 kg)

For more information visit us at www.kentool.com 40

Wheel Cover & Wheel-Lock Removal Kits Eight Piece Twist Socket Set
Juego de dados giratorios de ocho piezas
Juego de extracción de cubiertas y anillos de
retención de ruedas Jeu de huit douilles de torsion
Kit d'outils de démontage des enjoliveur et bloqueur Socket sizes:
de roue 30117-06 6 mm socket
30117-08 8 mm socket
Nine Piece Kit 30117-10 10 mm socket
Juego de nueve piezas 30117-12 12 mm socket
30117-13 13 mm socket 30117-15 15 mm socket
Kit neuf pièces 30117-14 14 mm socket 30117-17 17 mm socket
Remove and replace GM, Ford, Chrysler
hubcap locks and aftermarket wheel lug Item No. Description Drive Weight
locks without the factory issued key. 30117 8 Pc. Set w/Organizer Bar 1/4" .9 lbs (.4 kg)
Save time! Will not damage the lock or stud.
Set contains:
30170-10 Ford & Chrysler Hubcap Locks/Lg. GM Triangle Wheel locks Nine Piece Twist Socket Set
30170-20 GM Spline Hubcap Locks Juego de dados giratorios de nueve piezas
30170-30 GM Hubcap Locks
30170-40 18 mm Lugs/GM Wheel Cover Locks/Ford Wheel Locks
Jeu de neuf douilles de torsion
30170-50 Corvette/GM “N” & “F” Body Wheel Locks
Socket sizes:
30170-60 Std. McGard-Style Wheel Locks/Lg. GM Wheel Cover
30106-05 10 mm socket
30170-70 Oversized McGard-Style
Wheel Locks 30106-07 7/16", 11 mm socket
Item No. Drive Weight 30106-11 12 mm socket
30170-80 Punch
30170 1/2" 3.1 lbs (1.4 kg) 30106-13 13 mm socket
30170-90 Lg. Dia. Chrysler Lock
30106-15 14 mm socket
Thirteen Piece Kit 30106-19 15 mm socket 30106-25 17 mm socket
30106-21 5/8", 16 mm socket 30106-27 3/4", 19 mm socket
Juego de trece piezas
Kit treize pièces Item No. Description Drive Weight
Set contains: 30109 9 Pc. Set w/Organizer Bar 3/8" 2.8 lbs (1.2 kg)
30170-10 Ford & Chrysler Hubcap Locks/
Lg. GM Triangle Wheel Locks
30170-20 GM Spline Hubcap Locks Thirteen Piece Twist Socket Set
30115-02 3/4", 19mm Damaged Wheel Lug Juego de dados giratorios de trece piezas
&Oversized Wheel Lock Remover
30170-30 GM Hubcap Locks Jeu de treize douilles de torsion
30115-05 7/8" Damaged Wheel Lug & Oversized Wheel Lock Remover
Socket sizes:
30170-40 18 mm Lugs/GM Wheel Cover Locks/Ford Wheel Locks
30106-01 3/8" socket
30171-45 18 mm Nut/Corvette GM Lock
30106-05 10 mm socket
30170-50 Corvette/GM “N” & “F” Body Wheel Locks
30106-07 7/16", 11mm socket
30170-60 Std. McGard-Style Wheel Locks/ Lg. GM Wheel Cover
30106-09 1/2" socket
30170-70 Oversized McGard-Style Wheel Locks
30106-11 12 mm socket
30170-80 Punch
Item No. Drive Weight 30106-13 13 mm socket
30170-90 Lg. Dia. Chrysler Lock
30171 1/2" 4.9 lbs (2.2 kg) 30106-15 14 mm socket
30110-06 3" Impact Extension
30106-17 9/16" socket 30106-23 11/16" socket
30106-19 15 mm socket 30106-25 17 mm socket
Twist Sockets & Twist Socket Sets 30106-21 5/8", 16 mm socket 30106-27 3/4", 19 mm socket
Dados giratorios y juegos de dados
Item No. Description Drive Weight
giratorios
30108 13 Pc. Set w/Organizer Bar 3/8" 1.6 lbs (.7 kg)
Douilles de torsion & jeux de douilles
de torsion
Five Piece Twist Socket Set with Punch
Twist sockets are specifically designed to easily remove damaged, rounded or
corroded nuts, wheel lugs, bolts, pipes, pipe nipples or studs. Simply place the Juego de dados giratorios de cinco piezas
socket so it barely catches the head of the fastener and turn with an air ratchet, con punzón
hand ratchet, or breaker bar. The unique spiral fluting bites onto the damaged
Jeu de cinq douilles
fastener and won’t let go. Designed for general automotive applications.
de torsion avec poinçon
Five Piece Deep Twist Socket Set
Juego de dados giratorios profundos de cinco piezas Socket sizes:
Jeu de cinq douilles profondes de torsion 30118-03 19 mm, 3/4" socket
30118-04 13/16" socket
Socket sizes:
30118-05 7/8" socket
30116-02 19 mm, 3/4" socket
30118-06 15/16" socket
30116-04 13/16" socket
30118-07 1" socket
30116-05 7/8" socket
30170-80 Punch
30116-07 15/16" socket 30116-08 1" socket
Item No. Description Drive Weight Item No. Description Drive Weight
30116 5 Pc. Set w/Organizer Bar 1/2" 2.5 lbs (1.1 kg) 30118 5 Pc. Set w/Plastic Case 1/2" 2 lbs (.9 kg)

41 WARNING: Always wear safety goggles when using hand tools

Nine Piece Twist Socket Set with Punch Individual Twist Sockets - Fluted
Juego de dados giratorios de nueve piezas Dados giratorios individuales, estriados
con punzón Douilles de torsion
Jeu de neuf douilles de torsion avec poinçon individuelles – cannelées
Socket sizes:
30106-05 10 mm socket
30106-07 7/16", 11mm socket
30106-11 12 mm socket
30152 30153
30106-13 13 mm socket
30106-15 14 mm socket Item No. Socket Sizes Fluted Drive Weight
30106-19 15 mm socket 30151 3/4", 19 mm & 13/16", 21 mm 12 1/2" .4 lbs (.18 kg)
30106-21 5/8", 16 mm socket 30152* 3/4", 19 mm & 13/16", 21 mm 6 1/2" .4 lbs (.18 kg)
30106-25 17 mm socket 30153 7/8" x 1" 12 1/2" .4 lbs (.18 kg)
30106-27 3/4", 19 mm socket 30154* 7/8" x 1" 6 1/2" .4 lbs (.18 kg)
30170-80 Punch *Includes punch pin

Item No.
30107
Description
9 Pc. Set w/Plastic Case
Drive
3/8”
Weight
1.5 lbs (.7 kg)
Flip Sockets & Impact Socket Sets
Dados abatibles y juegos de dados impacto
Thirteen Piece Twist Socket Set with Punch Douilles inversées & jeux de douilles à choc
Juego de dados giratorios de trece piezas
con punzón Three Piece 6-Fluted Twist Flip Socket Set
Jeu de treize douilles de Juego de dados abatibles giratorios con
torsion avec poinçon 6 estrías, tres piezas
Socket sizes: Jeu de trois douilles de torsion inversées
30106-01 3/8" socket à 6 cannelures
30106-05 10 mm socket
30106-07 7/16", 11 mm socket Socket sizes:
30106-09 1/2" socket 30152 19 mm & 13/16", 21 mm socket, 6-Fluted
30106-11 12 mm socket 30154 7/8" & 1" socket
30106-13 13 mm socket 30110-06 3" extension
30106-15 14 mm socket
30106-17 9/16" socket Item No. Description Drive Weight
30106-19 15 mm socket 30106-25 17 mm socket 30101 3 Pc. Set w/Plastic Case 1/2" 1.3 lbs (.6 kg)
30106-21 5/8", 16 mm socket 30106-27 3/4", 19 mm socket
30106-23 11/16" socket 30170-80 Punch
Three Piece 12-Fluted Twist Flip Socket Set
Item No. Description Drive Weight Juego de dados abatibles giratorios con
30106 13 Pc. Set w/Plastic Case 3/8" 1.9 lbs (.9 kg) 12 estrías, tres piezas
Ten Piece Slim Twist Socket Set with External Hex Jeu de trois douilles de torsion inversées
à 12 cannelures
Juego de dados giratorios delgados con cuadro hexagonal
externo Socket sizes:
Jeu de dix douilles minces de torsion avec extérieur 30151 19 mm & 13/16", 21 mm socket
30153 7/8" & 1" socket
hexagonal
30110-06 3" extension
Quickly removes damaged or rounded nuts, bolts, studs, and socket
head cap screws in tight quarters. The through hole design allows them to also Item No. Description Drive Weight
be used on long studs. Fits SAE sizes 3/8" to 3/4" and metric sizes from 9mm up 30102 3 Pc. Set w/Plastic Case 1/2" 1.3 lbs (.6 kg)
to 19mm. Used where standard twist sockets will not fit. Can be used with an
open-end wrench, or with a socket.
Three Piece 6-Pt. & 12-Fluted Twist Flip Socket Set
Socket sizes:
30270-01 9 mm ; ext. hex 5/8" socket Juego de dados abatibles giratorios, 6 puntas
30270-02 10 mm, 3/8" ; ext. hex 5/8" socket y 12 estrías, tres piezas
30270-03 11 mm, 7/16" ; ext. hex 11/16" socket Jeu de trois douilles de torsion inversées
30270-04 12 mm ; ext. hex 3/4" socket
30270-05 13 mm, 1/2" ; ext. hex 3/4" socket
à 12 cannelures et 3 points
30270-06 14 mm, 9/16" ; ext. hex 13/16" socket
30270-07 15 mm ; ext. hex 7/8" socket
30270-08 16 mm, 5/8" ; ext. hex 15/16" socket Socket sizes:
30270-09 17 mm, 11/16"; ext. hex 1" socket 30103-01 17 mm socket
30270-10 19 mm, 3/4" ; ext. hex 1-1/16" socket 30103-02 19 mm socket
30110-06 3" extension
Item No. Description Drive Weight
30270 10 Pc. Set w/Organizer Bar 3/8" 1 lb (.5 kg) Item No. Description Drive Weight
30271 10 Pc. Set w/Plastic Case 3/8" 1 lb (.5 kg) 30103 3 Pc. Set w/Plastic Case 1/2" 1.3 lbs (.6 kg)
DISCONTINUED
SOCKETS AND SOCKET SETS HAVE A
LIMITED LIFETIME WARRANTY
For more information visit us at www.kentool.com 42
Six Piece Thick and Thin Flip Socket Set* Three Piece Thinwall Flip Socket Set
Juego de dados abatibles gruesos y delgados, Juego de dados abatibles de pared delgada,
seis piezas tres piezas
Jeu de six douilles inversées fines et épaisse Jeu de trois douilles inversées à paroi mince
For those ever changing aftermarket and manufacturers' One end is a standard 6-point socket for everyday use.
wheels. One end is a standard 6-point socket for everyday Flip socket over and you have a 6-point socket of larger size.
use. Flip socket over and you have a thinwall socket of Socket sizes:
the same size for wheels with minimal clearance. 30110-01 19 mm - 21 mm socket
Socket sizes: 30110-02 3/4" - 13/16" socket
30112-01 17 mm socket 30112-04 13/16" socket 30110-06 3" extension
30112-02 19 mm, 3/4" socket 30112-05 7/8" socket
30112-03 21 mm socket 30110-06 3" extension Item No. Drive Weight
30110 1/2" 1.2 lbs (.54 kg)
Item No. Drive Weight
30112 1/2" 3 lbs (1.3 kg) Five Piece Thinwall Flip Socket Set*
Juego de dados abatibles de pared delgada,
Six Piece Deep Thinwall Impact Socket Set*
cinco piezas
Juego de dados de impacto profundo de pared
Jeu de cinq douilles inversées à paroi mince
delgada, seis piezas
One end is a standard 6-point socket for
Jeu de six douilles profondes à choc everyday use. Flip socket over and you
à paroi mince have a 6-point socket of larger size.
For the difficult aftermarket and manufacturers' wheels.
Socket sizes:
Socket sizes: 30110-01 19 mm - 21 mm socket
30113-01 17 mm socket 30113-04 13/16" socket 30110-02 3/4" - 13/16" socket
30113-02 19 mm, 3/4" socket 30113-05 7/8" socket 30119-03 7/8" - 15/16" socket
30113-03 21 mm socket 30110-06 3" extension 30119-04 17 mm - 19 mm socket
30110-06 3" extension
Item No. Drive Weight
30113 1/2" 3 lbs (1.3 kg) Item No. Drive Weight
30119 1/2" 2.1 lbs (1 kg)
Five Piece Double-Duty
Oil Drain Plug Removal Flip Socket Set Six Piece Double-Duty Flip Socket Set
Juego de dados abatibles para extracción del tapón del Juego de dados abatibles de doble servicio,
cárter de aceite de doble servicio, cinco pieza seis piezas
Jeu de cinq douilles inversées à double fonction Jeu de six douilles inversées double action
d'extraction de bouchon de purge d'huile
One end is a standard 6-point socket for everyday use.
One end is a standard 6-point socket for everyday
Flip socket over and you have a 6-fluted twist socket
use. Flip socket over and you have a twist socket
for removing damaged or rounded wheel lugs.
damaged oil drain plug remover of the same size.
Socket sizes:
Socket sizes:
30111-01 17 mm socket
30114 17 mm socket
30111-02 19 mm, 3/4" socket
30114 19 mm, 3/4" socket
30111-03 21 mm socket
30114-03 14 mm socket
30111-04 13/16" socket
30114-04 15 mm socket
30111-05 7/8" socket
30114-05 16 mm, 5/8" socket
30110-06 3" extension
Item No. Drive Weight
Item No. Drive Weight
30114 3/8" 3 lbs (1.3 kg)
30111 1/2" 2.8 lbs (1.2 kg)
Three Piece Lug & Lock Flip Socket Set
Juego de dados abatibles para trabas/ruedas, tres piezas
Impact Extensions
Jeu de trois douilles de torsion inversées d'arrêt et de roue Extensiones de impacto
One end is a standard 6-fluted twist socket for
Rallonges à choc
removing damaged wheel lugs. Flip socket over
and you have a 12-fluted twist socket for
removing wheel locks.
Socket sizes: 30245 30246
30115-02 19 mm, 3/4" socket
1" sq. dr. male x 1" sq. dr. female 3/4" sq. dr. male x 1" sq. dr.
30115-05 7/8" socket 13" impact extension. Provides male 13" extension. Pro-
30110-06 3" extension 30110-06 access to hard-to-reach areas vides access to deep budd
with 1" impact socket applications. wheels.
Item No. Drive Weight
30115 1/2" 1.6 lbs (.7 kg) Item No. Description Drive Weight
30110-06 3" Impact Extension 1/2" .4 lbs (.18 kg)
SOCKETS AND SOCKET SETS HAVE A
30245 1" Drive x 13" Impact Extension 1/2" .4 lbs (.18 kg)
LIMITED LIFETIME WARRANTY 30246 3/4" Sq. Dr. Male x 1" Sq. Dr. Male 1/2" .4 lbs (.18 kg)
*Thinwall sockets have a two-year warranty with proof of purchase 13" Impact Ext

43 WARNING: Always wear safety goggles when using hand tools

Deep, Thin Wall Flip Socket Dual Wheel Lug Stud Remover
Llave de tubo movible, 30156 Desmontador de tuercas para ruedas dobles
de paredes finas Extracteur de goujons de roues de camions à
y profundidad prise double
Douille double tête Special self-tapping
profonde à paroi étroite splines provide
1/2" square drive, black impact socket is deep and thin walled to reach areas maximum grip to 1-1/2"
conventional sockets won't. Flip socket provides two socket sizes which remove stripped lug
cover virtually all SAE automotive wheel lug sizes. Imported. studs. Use with TR1, TR98 truck
wrenches. Can also be used with
Item No. Socket Sizes Drive Weight
an open end wrench. Use with
30156 3/4", 13/16" 1/2" .4 lbs (.18 kg) soft faced hammer. (see pg. 21)
30158 19 mm, 21 mm 1/2" .4 lbs (.18 kg) Special
self-tapping splines
Item No. Description Weight
Universal Emergency Wheel-Lock Remover 30165 Fits 13/16" sq. inner nut 1 lb (.5 kg)

Desmontador universal para Four Piece Lug Nut Remover Socket Set
anillos de seguridad de Juego de dados para extractor de
ruedas de emergencia tuercas de rueda, cuatro piezas
Dégageur de bloqueur de Jeu de douilles d'extracteur
roue universel de secours (4 pièces) d'écrou de roue
Use for removing wheel locks or
Removes wheel locks when the key is lost or damaged lug nuts. Made from PATENTED
misplaced. 1" I.D. Tapered socket fits over most car wheel chrome-moly steel. Made in Taiwan.
locks. Use soft-faced hammer to drive onto wheel lock. Limited use.
Socket Sizes:
Item No. Drive Weight 30254-06 - 3/4" Socket 30254-08 - 1" Socket
30161 1/2" 1 Ib (.5 kg) 30254-07 - 13/16" Socket 30254-09 - 1-1/8" Socket
Item No. Description Drive Weight
Heavy-Duty Impact Sockets 30254 4 Pc. Lug Nut Remover Socket Set 1/2" 1.4 lbs (.6 kg)
Llaves de tubo de impacto de alta resistencia Four Piece Heavy-Duty Wheel Stud Remover Set
Douilles résistantes aux chocs Juego de extractores de pernos de ruedas de alta
Special Purpose Impact Sockets Off-Road Budd, resistencia, cuatro piezas
Square, SAE, and Metric Jeu d'extracteurs robustes
Llaves de tubo de impacto especializados para todo (4 pièces) de goujon de roue
terreno tipo Budd, cuadrados, de SAE y métricos Inner Budd Nut & Wheel Stud Removal Set.
Removes damaged wheel studs and inner Budd nuts.
Douilles carrées, SAE, métrique Internal tapered reverse Inner Budd Nut & Wheel
ou pour roues à disques, Stud Removal Set threads lock onto damaged stud
spécialement conçues pour or nut and easily pulls off using impact wrench.
résister aux chocs Wheel Stud Removers are 3/4" hex drive. Budd Nut
Removers are 1-1/8" hex drive. Made from chrome-
Special 1-1/2" hex deep heavy-duty 30120 30121 30356 moly steel. 90 PSI maximum. Made in Taiwan. PATENTED
impact socket designed for outer cap nuts on Budd-style truck wheels. The Impact Socket Sizes:
1-1/2" hex depth is limited to help prevent socket contact with the wheel. The 30649-01 - 5/8" Socket 30649-03 - Budd Wheel Inner Nut LH
socket is deep style to eliminate contact with the inner cap nut. Imported. 30649-02 - 3/4" Socket 30649-04 - Budd Wheel Inner Nut RH
3/4" Drive 1" Drive Item No. Description Weight
Item No. Description Item No. Description Weight 30649 4 Pc. H.D. Wheel Stud Remover Set 3.5 lbs (1.6 kg)
30120 13/16" square 30149 13/16" square 1.4 lbs (.6 kg)
Seven Piece Thin-Wall Impact Socket Set
Combination Budd Wheel - SAE and Metric Juego de dados de impacto de
Rueda de combinación tipo Budd– SAE y métrica pared delgada, siete piezas
Deux en un pour roues à disques - SAE et métrique Jeu de douilles à choc
3/4" Drive 1" Drive (sept pièces) à paroi mince
Item No. Description Item No. Description Weight
Non-Marring sockets for delicate wheels with
30121 1-1/2" x 30150 1-1/2" x 3.1 lbs (1.4 kg)
minimal clearance for Car / Light Truck.
13/16" square 13/16" square
Made from chrome-moly steel. Made in Taiwan.
Deep Length Impact Sockets - SAE and Metric Socket Sizes:
30259-03 - 13/16" Socket
Llaves de tubo de impacto de longitud profunda- SAE y métrica 30259-04 - 7/8" Socket
Douilles de profonde longueur - SAE et métrique 30259-05 - 1" Socket 30259-08 - 19 mm Socket
6 point, 3/4" Drive 6 point, 1" Drive 30259-07 - 17 mm Socket 30259-09 - 21 mm Socket
Item No. Description Item No. Description Weight Item No. Description Drive Weight
30356 33 mm deep 30366 33 mm deep 1.6 lbs (.7 kg) 30259 7 Pc. Thin-Wall Impact Socket Set 1/2" 5 lbs (2.3 kg)

For more information visit us at www.kentool.com 44

TPMS Sensor Hardware Service Set
Juego de servicio de sensores TPMS
Ensemble d'entretien matériel des capteurs TPMS

NO MORE GUESSING!
Includes Complete All of the hardware needed to
Vehicle Application Guide
service most domestic and
import TPMS sensors!
Versatile 150-pc assortment (15 unique kits)
covers 90-95% of TPMS-fitted vehicles
Each Hardware Kit contains a valve core, valve cap,
grommet ferrule nut, gaskets, washers and valve stem
(contents specific to each application).
Special Bonus — Ken-Tool’s TPMS SentryTM Sensor
Service Tool No. 30209.
Plus 50 extra TPMS approved nickel plated valve cores
Includes the
TPMS SentryTM and 50 extra approved plastic caps.
Set No. 30001 Weight: 6 lbs (2.7 kg)
Sensor Service Tool Replacement Hardware Kits Available From Ken-Tool.
150 Pc. Set with 3" x 9" x 16" Portable Poly Case Includes:

Also available separately: • También disponible por separado: • Également disponible séparément :
Item No. Description Torque Limit
30060 Valve Core Torque Driver 4 in-lbs
30070 1/4"-drive Variable Ratcheting Torque Wrench 30-150 in-lbs
30080 11mm Deep Socket, 1/4"-drive
30081 12mm Deep Socket, 1/4"-drive
30060 30070 30080 30081 30090
30090 Torque Driver & T-10/T-15 TORX ® bits 12 in-lbs

45 WARNING: Always wear safety goggles when using hand tools

Impact Separator Tool
Impacto de la herramienta de separación • Outil impacteur

PATENT Heavy-duty impact front end service tool. Hits harder and straighter than a hammer,
PENDING but no more misses or glancing blows. Two easily interchangeable hardened steel
forks. Use the T39B-1 fork to separate shock absorber links and tie rods; Use the
T39B-2 fork on spindle support arms to remove ball joints without damaging other
suspension parts. Services compact cars and light duty trucks too. Made in USA.
Includes impact separator tool with 2 forks:
35939-01 35939-01 = T39B-1 Tie Rod Fork, Fork Opening: 5/8" (2 cm)
35939-02 = T39B-2 Ball Joint Fork, Fork Opening: 15/16" (2 cm)
Model Item No. Description Length Weight
35939-02
T39B 35939 Impact Separator Tool w/2 forks 36-1/2" (92.71 cm) 9.8 lbs (4.5 kg)

Front End Service Tools MacPherson Strut Coil Spring Compressor Set
Herramientas para el mantenimiento Equipo compresor de resorte espiral de montante
delantero MacPherson
Outils de service du train avant Groupe compresseur de ressort hélicoïdal à jambe
These tools are manufactured from a single piece of alloy steel, forged, and de suspension
heat-treated for long life. Essential when replacing suspension parts. Striking
Compressor works on most
ends have been enlarged to provide a bigger and safer striking surface.
MacPherson Strut assemblies
Painted finish for rust resistance. Ken-Tool offers a size and design for all
and is for use with replace-
your needs.
ments. Use the compressor
Separator Tool • Herramienta separadora • Séparateur when replacing bent strut or
strut tube and damaged
spindles. Use it on or off
the car. Acme threaded
screw for durability.
Use to remove camber adjustment sleeves on Ford 4 x 2 and 4 x 4 pickups. Do not use on General Motors “A”,
Use as Pitman arm wedge on medium and heavy-duty trucks. “C”, “J”, or “X” body cars. Imported.
Model Item No. Length Stock Fork Opening Weight Item No. Weight
B36 32036 11" (28 cm) 7/8" (2 cm) 1-7/16" (4 cm) 1.9 lbs (.8 kg) 39730 7 lbs (3.1 kg)

Pitman Arm Wedge Universal Tie Rod Adjusting Tool

Cuña para la biela de mando de la dirección Herramienta universal de ajuste de
Coin pour bielle pendante la barra de acoplamiento
Outil universel pour réglage de barre
Removes Pitman arms on cars and light trucks. d'accouplement
Model Item No. Length Stock Fork Opening Weight
B37 32037 11" (28 cm) 7/8" (2 cm) 1- 1/8" (3 cm) 1.8 lbs (.8 kg) 360 degree sleeve rotation without removing
tool from tie rod. The Tie Rod adjusting tool has
Shock Link and Tie Rod Separator an 8 position feature for proper tool location and
Separador de la barra de acoplamiento y la unión del amortiguador works on all car models including 1-ton pick-ups,
Fourche à barre d'accouplement et articulation d'amortisseur midsized trucks and large vans.
Item No. Length Stock Weight
32030 14-1/2" (37 cm) 1/2" (1.8 cm) 1.3 lbs (.6 kg)

Use to separate shock absorber links and tie rods. Heavy Duty Tie Rod End Tool
Model Item No. Length Stock Fork Opening Weight Herramienta de servicio pesado para
B39 32039 16" (41 cm) 7/8" (2 cm) 5/8" (2 cm) 2.1 lbs (.9 kg)
el extremo de la barra de acoplamiento
Ball Joint Separator Outil robuste pour embout
Separador de juntas de rótulas • Séparateur de joint à rotule d'accouplement
The 3/4" square drive Tie Rod Socket is designed
for use on 9,000 through 20,000 pound axles or
classes 7 & 8. The U-shaped slot measures
Use on spindle support arms to remove ball joints without damaging other 1-7/8" x 1-1/2" with an inside diameter of 3" in
suspension parts. Services compact cars and light duty trucks. the socket. The length is 3-1/2".
Model Item No. Length Stock Fork Opening Weight Item No. Drive Weight
B40 32040 16" (41 cm) 7/8" (2 cm) 15/16" (2 cm) 2.8 lbs (1.2 kg) 32031 3/4" Square 4 lbs (1.8 kg)

For more information visit us at www.kentool.com 46

Cross-Pein / Blacksmith Hammer Aligning & Pry Bars
Martillo de mano/de peña Alineación y palancas
Marteau à panne de travers/de forgeron Leviers & barres d'alignement
High carbon steel with machine Aligning Bars
polished face.
Barras de alineación • Barres d'alignement
Top Grade U.S.Hickory Handle
Mango U.S. Hickory de primera calidad
Manche de qualité supérieure U.S. Hickory A forged, alloy steel, heat-treated bar that can be used for prying, aligning
Model item No. Length Face Eye Size Head Weight and positioning many heavier jobs in the shop. The finish is black oxide.
85H-3 37103 15" (38 cm) 1-5/8" 1 x 1-3/4" 3 lbs (1.4 kg) Item No. Stock Length Weight
85H-3H 37023 15" (38 cm) Replacement Handle NEW 7025 5/8" (16 mm) 18" (45.7 cm) 1.4 lbs (.6 kg)
7026 3/4" (19 mm) 20" (50.8 cm) 2.3 lbs (1 kg)
New England Pattern Hand-Drilling Hammers 7027 3/4" (19 mm) 24" (61 cm) 2.8 lbs (1.3 kg)
Martillos perforadores de mano 7028 7/8" (22 mm) 30" (76.2 cm) 5 lbs (2.3 kg)
con patrones de Nueva Inglaterra
Close Quarters Bars
Perforateur manuel modèle
Barras de cuartos cerrados • Barres à distance rapprochée
‘New England’
Top grade U.S. hickory handle. 80H-4
These bars are made of forged, alloy steel, and heat-treated. Designed for use
Model Item No. Length Face Eye Size Head Weight in tight spots, their balanced construction provides very powerful leverage.
8OH-3 37003 10" (25 cm) 1-1/2" 1 x 3/4" 3 lbs (1.4 kg) The finish is black oxide.
8OH-4 37004 10" (25 cm) 1-5/8" 1 x 3/4" 4 lbs (1.8 kg)
Item No. Stock Length Weight
80H-3H 37012 10" (25 cm) Replacement Handle for 80H-3, 80H-4 NEW
7030 3/8" (10 mm) 9" (22.9 cm) .31 lbs (.14 kg)
Tire Knockers 7031 1/2" (13 mm) 16" (40.6 cm) .89 lbs (.4 kg)
7032 5/8" (16 mm) 18" (45.7 cm) 1.5 lbs (.7 kg)
Golpeadores de llantas
Bâtons de vérification de Die Setter Bars
pression des pneus Barras troqueladoras • Barres de monteur de matrices

Item No. Length Weight

A practical and useful shop tool for the quick separation of
35110 18" (46 cm) .7 lbs (.3 kg)
punch and die holder. The bars are made of forged, alloy steel
and heat-treated for strength. The finish is black oxide.
Double-Face Sledge Hammers
Item No. Stock Length Weight
Mazas dobles
7035 5/8" (16 mm) 18" (45.7 cm) 1.7 lbs (.8 kg)
Masses à double-face 84H-4 7037 3/4" (19 mm) 30" (76.2 cm) 4.2 lbs (1.9 kg)

Top Grade U.S.Hickory Handle

Mango U.S. Hickory de primera calidad
Dead Blow Hammers
Manche de qualité supérieure U.S. Hickory Martillos de golpe seco • Masse sans rebond
Head is shot filled for maximum force with no bounce
High carbon steel, heat treated. Machined, polished face.
effect. Safest non-marring, non-sparking hammers
Model Item No. Length Face Eye Size Head Weight available. Great for tire changing and general shop use.
84H-2 37302 15" (38 cm) 1-1/2" 3/4" x 1" 2.5 lbs (1.1 kg) High quality materials to withstand years of hard use.
84H-4 37304 15" (38 cm) 1-3/4" 3/4" x 1" 4 lbs (1.8 kg)
Economy Strike Pro®
84H-8 37308 36" (91 cm) 2" 1" x 1-3/8" 8 lbs (3.6 kg)
Económico • Économique
84H-10 37310 36" (91 cm) 2-1/8" 1" x 1-3/8" 10 lbs (4.5 kg)
Dead blow action in high visibility colors. T336
84H-12 37312 36" (91 cm) 2-1/8" 1" x 1-3/8" 12 lbs (5.4 kg)
84H-16 37316 36" (91 cm) 2-3/8" 1" x 1-3/8" 16 lbs (7.2 kg) Model Item No. Color Length Nominal Weight
84H-20 37320 36" (91 cm) 3" 2" x 1.5" 20 lbs (9 kg) T335 35335 Safety Yellow 12" (31 cm) 1 lb (.5 kg)
85H-3H 37023 15" (38 cm) Replacement Handle for 85H-3, 84H-2, 84H-4 NEW T336 35336 Safety Orange 12" (31 cm) 1.5 lbs (.7 kg)
84H-8H 37025 36" (91 cm) Replacement Handle for 84H-8, 84H-10, 84H-12, 84H-16 NEW
84H-20H 37089 36" (91 cm) Replacement Handle for 84H-20
Professional Dead Blow
NEW
Martillo de golpe seco profesional
2 lb. Rubber Mallet Masse professionnelle sans rebond
Mazo de goma de 2 libras
Power-drive fiberglass handle
Maillet en caoutchouc de 2 lb gives 20% more driving power,
Rubber head minimizes yet reduces user fatigue. TG337 Steel face
marring surfaces.
Model Item No. Description Length Nominal Weight
Model Item No. Handle Length Head Weight TG332 35332 2 lb Head (.9 kg) 13-1/2" (34 cm) 1.9 lbs (.9 kg)
T32 35310 17" (43 cm) 2 lbs (.9 kg) TG333 35333 3 lb Head (1.4 kg) 14-1/2" (37 cm) 2.7 lbs (1.2 kg)
WARNING: Always wear safety goggles when using striking or struck tools. Never use one hammer to TG334 35334 4 lb Head (1.8 kg) 15-1/2" (40 cm) 3.4 Ibs (1.5 kg)
strike another hammer. Never use a tool with a loose or damaged handle. Discard any striking or struck
tool if tool shows dents, cracks, chips, or mushrooming.
TG337 35337 Steel Face / Soft Face 13-1/2" (34 cm) 2.2 lbs (1 kg)

47 WARNING: Always wear safety goggles when using hand tools

 ®

ADB22X
® TM

Air Disc Brake Tool Kits

These kits provide specialized tools for the replacement of Bendix ® air disc brake
tappet and boot assemblies, tappet inner seals, and guide pins and boots.
No. 80000 ADB22X Complete Kit (Bendix #K029164)
Juego completo No. 80000 ADB22X (Bendix No. K029164)
Kit complet ADB22X No. 80000 (Bendix #K029164)
Kit No. 80000 Weight: 22 Lbs (10 kg). Top Seller
Includes Kit No. 80001 and Kit No. 80002 listed below:

Tappet & Boot Replacement Tool Kit (Bendix #K028829)

Juego de herramientas de reemplazo de balancines y capuchones (Bendix No. K028829)
Kit d'outillage de remplacement de poussoir et de démarrage (Bendix #K028829)
Kit No. 80001 Weight: 7 Lbs (3.2 kg).
T02
7 Pc. Set Includes: T09
Bendix No. Ken-Tool No. Description T01
T01 80101 KT01 Cup
T02 80102 KT02 Handle for KT01 Cup
T03 80103 KT03 Swivel assy. made up of KT03-1 Short Body, T04
KT03-2 Brass Disc, and KT03-3 Retaining Spring
T15
T04 80104 KT04 Long Strut T24
T09 80109 KT09 Flange T03
T15 80115 KT15 Fork
T24 80124 KT24 Black Nylon Disc
No. 80001

Guide Pin / Pin Boot Service Tool Kit (Bendix #K029107) See page 25 of Bendix Service Manual listed below*

Juego de herramientas para servicio del pasador guía/capuchón del pasador (Bendix No. K029107)
Kit d'outillage d'entretien de broche de démarrage / broche de guidage (Bendix #K029107)
Kit No. 80002 Weight: 15 Lbs (6.8 kg).
13 Pc. Set Includes:
Bendix No. Ken-Tool No. Description T21 T12
T05 80105 KT05 1-3/8” Black Disc
T10 T13 T20
T06 80106 KT06 1-1/2” Black Disc
T07 80107 KT07 2” Dia. Sleeve
T08 80108 KT08 2-1/8” Dia. Disc T27
T16
T10 80110 KT10 8” Bolt
T12 80112 KT12 3-7/8” Long Sleeve T14
T13 80113 KT13 10” Bolt T26
T14 80114 KT14 Brass Nut
T16 80116 KT16 Dimpling Tool made up of KT16-1 Main Body, T07
KT16-2 Crimper Screw, KT16-3 Expansion Ring,
KT16-4 Plunger, KT16-5 Dimpling Pins, and KT16-6 Set Screw
Washers included
T20 80120 KT20 8” Bolt
T06 T05 No. 80002
T21 80121 KT21 Half Sleeve
T26 80126 KT26 Cap Tool made up of KT26-1 Retaining Ring, See page 30 of Bendix Service Manual listed below*
KT26-2 Mandrel and KT26-3 Sleeve *For detailed instructions see the
T27 80127 KT27 Cap Tool made up of KT26-1 Retaining Ring, Bendix ADB22X service manual SD-23-7541 on the
KT26-2 Mandrel and KT27-3 Sleeve "Manuals and Parts Lists" link at www.kentool.com

KEN-TOOL • 768 E. North Street, Akron, OH 44305 KT070210BENDIX

Toll Free: 888-536-8665 • Fax: 800-872-4929 • Phone: 330-535-7177 • Fax: 330-535-1345
E-mail: sales@kentool.com • www.kentool.com 48
 CROSS-REFERENCE BY ITEM NUMBER
ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE
NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO.
7025 47 30206 40 31551 T51 28 32505 TR3A 32 35127 T11DH 25 35837 27
7026 47 30207 40 31554 T54 28 32506 TR3X 32 35129 T11EH 25 35839 27
7027 47 30208 40 31567 T67 29 32508 TR98 32 35131 T11EHS 25 35840 27
7028 47 30209 45 31568 T68 29 32509 TR9 32 35201 T12B 25 35847 T147A 27
7030 47 30211 40 31710 15, 17, 18, 22 32512 TR2A 32 35202 T12D 25 35847S T147A 27
7031 47 30212 40 31713 4, 15, 22 32519 TR99 32 35206 TG31H 25 35848 4, 15, 27
7032 47 30213 40 31714 22 32551 TRM1 32 35211 TG11BH 25 35924 T24B 23
7035 47 30214 40 31715 5 32552 TRM2 32 35219 TG11CH 25 35926 T26B 23
7037 47 30215 T16P 28 31810 4, 9, 15, 17, 18, 22 32553 TRM3 32 35227 TG11DH 25 35934 T34B 10, 24
7326 37 30216 40 31820 T22R 20 32556 TRM6 32 35229 TG11EH 25 35935 10, 24
7326U 37 30217 40 31830 T1920Z18 19 32557 TRM7 32 35230 T11KH 25 35936 T36B 10, 24
29975 6 30218 40 31831 T1922Z18 19 32559 TRM6A 32 35310 T32 47 35937 10, 24
29980 3 30219 40 31832 T2022Z18 19 32610 32 35311 T11B 25 35938 T38B 10, 24
29981 3 30220 40 31833 T1921Z18 19 33020 T21A 20 35317 T33R 25 35939 T39B 46
29999 8 30221 40 31834 T2021Z18 19 33021 T22A 20 35321 T34 25 35998 T98 23
29999M 8 30222 40 31835 T2122Z18 19 33022 T19M 20 35323 T35 4, 15, 25 36001 T101 35
30001 45 30223 40 31840 T1920Y18 19 33023 T20M 20 35325 T36 25 36002 T102 35
30060 45 30224 40 31841 T1922Y18 19 33024 T21M 20 35327 T11D 24 36003 T103 35
30070 45 30225 40 31842 T2022Y18 19 33025 T22M 20 35329 T11E 24 36004 T104 35
30080 45 30226 40 31843 T1921Y18 19 33026 T22HD 20 35330 T11ES 4, 15, 24 36005 T105 35
30081 45 30227 40 31844 T2021Y18 19 33050 T1920A30 19 35332 TG332 47 36006 T106 35
30090 45 30228 40 31845 T2122Y18 19 33051 T1922A30 19 35333 TG333 47 36007 T101A 35
30101 42 30229 40 31850 T1920X18 19 33052 T2022A30 4, 15, 19 35334 TG334 47 36008 T108 35
30102 42 30230 40 31851 T1922X18 19 33053 T1921A30 19 35335 T335 47 36009 T109 35
30103 42 30231 40 31852 T2022X18 19 33054 T2021A30 19 35336 T336 47 36010 T110 35
30106 42 30232 40 31853 T1921X18 19 33055 T2122A30 19 35337 TG337 47 36011 T111 35
30107 42 30233 40 31854 T2021X18 19 33060 T1920M30 19 35354 B230 13, 28 36013 T113 36
30108 41 30234 39 31855 T2122X18 19 33061 T1922M30 19 35355 B232 13, 28 36014 T114 36
30109 41 30235 40 32030 46 33062 T2022M30 19 35359 13 36015 T115 36
30110 43 30236 40 32031 46 33063 T1921M30 19 35361 13 36016 T116 36
30111 43 30237 40 32036 B36 46 33064 T2021M30 19 35411 TG11B 25 36017 T117 36
30112 43 30238 40 32037 B37 46 33065 T2122M30 19 35417 TG33R 25 36018 T118 36
30113 43 30239 40 32039 B39 46 33195 15 35421 TG34 25 36019 T119 35
30114 43 30240 40 32040 B40 46 33196 15, 22 35423 TG35 25 36045 34
30115 43 30241 40 32101 T1X 20 33199 15 35425 TG36 25 36046 34
30116 41 30242 40 32102 T2X 20 33219 T19A 20 35427 TG11D 24 36047 33
30117 41 30243 40 32106 T6A 20 33220 T20A 20 35429 TG11E 24 36049 33
30118 41 30244 40 32109 T9A 20 33223 T23A 21 35440 4, 15 37003 80H-3 47
30119 41 30245 43 32110 T9C 20 33224 T23B 21 35442 15 37004 80H-4 47
30120 44 30246 43 32114 20 33238 T38 20 35444 4, 15 37012 80H-3H 25, 47
30121 44 30247 40 32115 T5 20 33239 T39 20 35446 18 37023 85H-3H 25, 47
30149 44 30248 40 32116 T16A 20 33341 T41 23 35447 T2005 18 37025 84H-8H 25, 47
30150 44 30249 40 32117 T16C 20 33342 T42 23 35448 T2006 18 37089 84H-20H 25, 47
30151 42 30250 40 32118 T8 20 34121 T21F 20 35449 T2001 17 37103 85H-3 47
30152 42 30251 40 32119 T19 20 34122 T21HD 20 35450 T2002 17 37302 84H-2 47
30153 42 30254 44 32120 T20 20 34401 TR10 32 35453 17 37304 84H-4 47
30154 42 30255 40 32121 T21R 20 34402 TR11 32 35455 5 37308 84H-8 47
30156 44 30256 40 32123 T23 21 34420 32 35456 5 37310 84H-10 47
30158 44 30257 40 32125 T25 21 34543 TR43 31 35457 5 37312 84H-12 47
30161 44 30258 40 32126 T26A 23 34545 TR44X 31 35459 9 37316 84H-16 47
30165 44 30259 44 32127 T27 21 34547 TR44SW 31 35460 T11K 24 37320 84H-20 47
30170 41 30270 42 32128 T27A 21 34549 14 35529 T11AH 25 38600 T600 26
30171 41 30271 42 32129 21 34555 5 35595 TC95 30 38601 T601 26
30174 39 30299 40 32130 21 34644 T45A-2000K 16 35620 T9520 30 38620 26
30175 39 30356 44 32131 21 34645 T45A 4, 15, 16 35623 R23 30 39604 KT-4 38
30176 39 30366 44 32318 TR5 32 34645C T45AC 15, 16 35624 R24 30 39606 KT-6 38
30179 39 30511 B111 27 32319 TR5A 32 34647 T45HD 16 35627 R90 31 39608 KT-8 38
30180 39 30512 4, 15, 27 32420 T22F 20 34648 T48A 21 35630 31 39730 46
30181 40 30515 T15 28 32430 T1920Z24 19 34649 T45AS 16 35633 31 39760 29
30182 40 30600 12 32431 T1922Z24 19 34652 T52 23 35634 31 39805 T43A 20
30183 40 30605 32 32432 T2022Z24 19 34670 T100 23 35635 31 39806 T43C 20
30184 40 30606 29 32433 T1921Z24 19 34672 TS72 26 35637 31 39808 T44 20
30185 40 30609 TX9 29 32434 T2021Z24 19 34674 TS74 26 35638 31 39810 T43D 20
30186 40 30610 TX10 29 32435 T2122Z24 19 34678 TS42 26 35648 34 39998 27
30187 40 30612 TX12 29 32440 T1920Y24 19 34746 T46 16 35656 T56 30 64055 K55 38
30188 40 30618 TX200 29 32441 T1922Y24 19 34747 T46A 16 35657 T57 30 64065 K65 38
30189 40 30619 TX241 29 32442 T2022Y24 19 34748 T46B 16 35659 T59 30 64650 KT4650 38
30190 39 30620 TX50 29 32443 T1921Y24 19 34749 T46C 16 35661 T61 30 64800 KT4800 38
30195 40 30649 44 32444 T2021Y24 19 34846 T47 16 35662 T62 30 80000 48
30196 40 31361 X161 28 32445 T2122Y24 19 34847 T47A 16 35663 T63 30 80001 48
30197 40 31431 T131 28 32450 T1920F24 19 34848 T47B 16 35690 T90 30 80002 48
30198 40 31432 T132 28 32451 T1922F24 19 34849 T47C 16 35695 T95 30
30199 40 31433 T133 28 32452 T2022F24 19 34950 T950 22 35696 T96 30
30200 40 31437 28 32453 T1921F24 19 35104 T11RH 25 35697 T95A 30
30201 40 31438 28 32454 T2021F24 19 35105 T34RH 25 35775 7
30202 40 31439 28 32455 T2122F24 19 35110 47 35776 7
30203 40 31440 26 32501 TR1 32 35111 T11BH 25 35795 TM95 30
30204 40 31444 11 32502 TR2 32 35113 T11HN 25 35805 D105A 27
30205 40 31446 28 32503 TR3 32 35119 T11CH 25 35820 R20 30

49
 CROSS-REFERENCE BY MODEL NUMBER
ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE ITEM MODEL PAGE
NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO.
37003 80H-3 47 35329 T11E 24 35936 T36B 10, 24 36004 T104 35 32441 T1922Y24 19 35334 TG334 47
37012 80H-3H 25, 47 35129 T11EH 25 33238 T38 20 36005 T105 35 31831 T1922Z18 19 35337 TG337 47
37004 80H-4 47 35131 T11EHS 25 35938 T38B 10, 24 36006 T106 35 32431 T1922Z24 19 35795 TM95 30
37310 84H-10 47 35330 T11ES 4, 15, 24 33239 T39 20 36008 T108 35 35449 T2001 17 32501 TR1 32
37312 84H-12 47 35113 T11HN 25 35939 T39B 46 36009 T109 35 35450 T2002 17 32502 TR2 32
37316 84H-16 47 35460 T11K 24 33341 T41 23 36010 T110 35 35447 T2005 18 32512 TR2A 32
37302 84H-2 47 35230 T11KH 25 33342 T42 23 36011 T111 35 35448 T2006 18 32503 TR3 32
37320 84H-20 47 35104 T11RH 25 39805 T43A 20 36013 T113 36 33054 T2021A30 19 32505 TR3A 32
37304 84H-4 47 35201 T12B 25 39806 T43C 20 36014 T114 36 32454 T2021F24 19 32506 TR3X 32
37308 84H-8 47 35202 T12D 25 39810 T43D 20 36015 T115 36 33064 T2021M30 19 32318 TR5 32
37025 84H-8H 25, 47 30515 T15 28 39808 T44 20 36016 T116 36 31854 T2021X18 19 32319 TR5A 32
37089 84H-20H 25, 47 32116 T16A 20 34645 T45A 4, 15, 16 36017 T117 36 31844 T2021Y18 19 32509 TR9 32
37103 85H-3 47 32117 T16C 20 34644 T45A-2000K 16 36018 T118 36 32444 T2021Y24 19 34401 TR10 32
37023 85H-3H 25, 47 30215 T16P 28 34645C T45AC 15, 16 36019 T119 35 31834 T2021Z18 19 34402 TR11 32
30511 B111 27 32119 T19 20 34649 T45AS 16 31431 T131 28 32434 T2021Z24 19 34543 TR43 31
35354 B230 14, 28 33219 T19A 20 34647 T45HD 16 31432 T132 28 33052 T2022A30 4, 15, 19 34547 TR44SW 31
35355 B232 14, 28 33022 T19M 20 34746 T46 16 31433 T133 28 32452 T2022F24 19 34545 TR44X 31
32036 B36 46 32120 T20 20 34747 T46A 16 35847 T147A 27 33062 T2022M30 19 32508 TR98 32
32037 B37 46 33220 T20A 20 34748 T46B 16 35847S T147A 27 31852 T2022X18 19 32519 TR99 32
32039 B39 46 33023 T20M 20 34749 T46C 16 35335 T335 47 31842 T2022Y18 19 32551 TRM1 32
32040 B40 46 33020 T21A 20 34846 T47 16 35336 T336 47 32442 T2022Y24 19 32552 TRM2 32
35805 D105A 27 34121 T21F 20 34847 T47A 16 38600 T600 26 31832 T2022Z18 19 32553 TRM3 32
64055 K55 38 34122 T21HD 20 34848 T47B 16 38601 T601 26 32432 T2022Z24 19 32556 TRM6 32
64065 K65 38 33024 T21M 20 34849 T47C 16 34950 T950 22 33055 T2122A30 19 32559 TRM6A 32
39604 KT-4 38 32121 T21R 20 34648 T48A 21 35620 T9520 30 32455 T2122F24 19 32557 TRM7 32
39606 KT-6 38 33021 T22A 20 31551 T51 28 33050 T1920A30 19 33065 T2122M30 19 34678 TS42 26
39608 KT-8 38 32420 T22F 20 34652 T52 23 32450 T1920F24 19 31855 T2122X18 19 34672 TS72 26
64650 KT4650 38 33026 T22HD 20 31554 T54 28 33060 T1920M30 19 31845 T2122Y18 19 34674 TS74 26
64800 KT4800 38 33025 T22M 20 35656 T56 30 31850 T1920X18 19 32445 T2122Y24 19 30609 TX9 29
35820 R20 30 31820 T22R 20 35657 T57 30 31840 T1920Y18 19 31835 T2122Z18 19 30610 TX10 29
35623 R23 30 32123 T23 21 35659 T59 30 32440 T1920Y24 19 32435 T2122Z24 19 30612 TX12 29
35624 R24 30 33223 T23A 21 35661 T61 30 31830 T1920Z18 19 35595 TC95 30 30620 TX50 29
35627 R90 31 33224 T23B 21 35662 T62 30 32430 T1920Z24 19 35411 TG11B 25 30618 TX200 29
32101 T1X 20 35924 T24B 23 35663 T63 30 33053 T1921A30 19 35211 TG11BH 25 30619 TX241 29
32102 T2X 20 32125 T25 21 31567 T67 29 32453 T1921F24 19 35219 TG11CH 25 31361 X161 28
32115 T5 20 32126 T26A 23 31568 T68 29 33063 T1921M30 19 35427 TG11D 24
32106 T6A 20 35926 T26B 23 35690 T90 30 31853 T1921X18 19 35227 TG11DH 25
32118 T8 20 32127 T27 21 35695 T95 30 31843 T1921Y18 19 35429 TG11E 24
32109 T9A 20 32128 T27A 21 35697 T95A 30 32443 T1921Y24 19 35229 TG11EH 25
32110 T9C 20 35310 T32 47 35696 T96 30 31833 T1921Z18 19 35206 TG31H 25
35529 T11AH 25 35317 T33R 25 35998 T98 23 32433 T1921Z24 19 35417 TG33R 25
35311 T11B 25 35321 T34 25 34670 T100 23 33051 T1922A30 19 35421 TG34 25
35111 T11BH 25 35934 T34B 10, 24 36001 T101 35 32451 T1922F24 19 35423 TG35 25
35119 T11CH 25 35105 T34RH 25 36007 T101A 35 33061 T1922M30 19 35425 TG36 25
35327 T11D 24 35323 T35 4, 15, 25 36002 T102 35 31851 T1922X18 19 35332 TG332 47
35127 T11DH 25 35325 T36 25 36003 T103 35 31841 T1922Y18 19 35333 TG333 47

☞ Inventors Wanted! ☞
If you have an idea for a
new tool please let us know!
Your idea could earn you
cash or a royalty.
Just visit our website at
www.kentool.com/inventors
to submit your idea for
consideration!
50
 Throughout this catalog watch for YouTube symbols that indicate one
or more videos are available for the product you are reviewing. Then
go to www.youtube.com/kentoolvideomedia to find a selection of
videos for our products. You can also scan the barcode with your
Smartphone to get a link to our YouTube videos or details on how to
Contact Us at Ken-Tool.

We believe all Ken-Tool customers should be satisfied with the

performance, quality and workmanship of whatever product they buy.
All Ken-Tool products are warranted against defects in materials and
workmanship for one year from the date of purchase. Any Ken-Tool
branded product that fails to perform its intended function, due to a
defect in workmanship or materials will, at our option, be replaced or
repaired free of charge. Warranty claims for items that have broken or
are no longer useful due to normal wear, misuse, abuse, alteration,
grinding, or heating, will not be honored. Proof of purchase
including the purchase date is required for warranty consideration.
Please contact Ken-Tool by phone or email if you have a warranty
claim.

Distributed By:

768 E. North Street, P.O. Box 9320

Akron, Ohio 44305
Toll Free: 888-536-8665 • Fax: 800-872-4929
Phone: 330-535-7177 • Fax: 330-535-1345
E-mail: sales@kentool.com • www.kentool.com

© 2015 All Rights Reserved KT0915 15M-RLT