Scribd
Upload
54 views3 pages

Cracked Tensile (KN) 8.9 Shear (KN) 7.2 Non-Crackedtensile (KN) 12 Shear (KN) 7.2

The Hilti HIT-RE 500-SD is an anchor rod for concrete with design resistances for tensile and shear loads under cracked and non-cracked concrete conditions. It is compatible with Hilti HIT-V rods in sizes from M8 to M30, and provides load capacities between 7-112 kN depending on the rod size and load type.

Uploaded by

Razell Ruiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
54 views3 pages

Cracked Tensile (KN) 8.9 Shear (KN) 7.2 Non-Crackedtensile (KN) 12 Shear (KN) 7.2

The Hilti HIT-RE 500-SD is an anchor rod for concrete with design resistances for tensile and shear loads under cracked and non-cracked concrete conditions. It is compatible with Hilti HIT-V rods in sizes from M8 to M30, and provides load capacities between 7-112 kN depending on the rod size and load type.

Uploaded by

Razell Ruiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

HILTI HIT-RE 500-SD WITH HIT V-ROD

HIT - V 5.8

Design Resistance: Concrete C20/25 -fck, cube = 25 N/mm2

M8
Tensile (KN) 8.9
Cracked
Shear (KN) 7.2
Tensile (KN) 12
Non-Cracked
Shear (KN) 7.2
E 500-SD WITH HIT V-ROD

M10 M12 M16 M20 M24


12.6 17.3 20.9 35.6 52.2
12 16.8 31.2 48.8 70.4
19.3 28 33.6 53.3 73.2
12 16.8 31.2 48.8 70.4
M27 M30
63 72.7
92 112
89.4 106.7
92 112

You might also like