Overview of our motors

MA series M series MYG series

MD series YVP series YEJ2 series

BM series MONO PHASE series MY MC ML

 TABLE OF CONTENTS

GENERAL INFORMATION A1 - A3

MA SERIES Moveable Feet A4 -A 8

Aluminum triphase squirrel cage induction motors in accordance with IEC/DIN
Frame size 56-132, output 0.06-18.5Kw, IP55, Insulation grade F.

M SERIES A9 - A19
Cast-iron triphase phase squirrel cage induction motors in accordance with IEC/DIN
Frame size 63-355, output 0.18-315Kw, IP55, Insulation grade F.

MD SERIES A20 - A21

Cast-iron triphase multi-speed motor

YEJ2 SERIES A22

DC brake motor

BM SERIES AC brake motor A23 - A25

4 Kinds frame size from 71 to 100, Specialized brake disc, no asbestos, with high friction coefficient and long life time
( abrasion wasting <0.15mm by 1300,000 times on-off) AC current brake, quickly response time Low noise & Vibration

MONO PHASE SERIES A26 - A28

MY --- capacitor running
MC --- capacitor starting
ML --- dual capacitor, starting and running
GENERAL INFORMATION

The Products
The core of our delivery program consists of:
MA series Aluminum triphase squirrel cage induction motors in accordance with IEC/DIN Frame size 56-132, output 0.06-18.5Kw,
IP55, Insulation grade F.
M series Cast-iron triphase squirrel cage induction motors in accordance with IEC/DIN
Frame size 63-355, output 0.18-315Kw, IP55, Insulation grade F.
MD series Cast-iron triphase multi-speed motor
YEJ2 series DC brake motor
BM series AC brake motor£¨H
MY series Monophase electric motors, aluminum body, Tstar t/Tn=0.35-0.55,capacitor permanent
Frame size 56-90, output 0.06-2.2Kw, IP55, Insulation grade F
MC series Monophase electric motors, aluminum body, High starting torque, Tstar t/Tn=2.2~3, capacitor start, Frame size 71-112,
output 0.12-3Kw, IP55, Insulation grade F
ML series Monophase electric motors, aluminum body, High starting & running torque, Tstar t/Tn=2.0~2.2,
capacitor start / capacitor run, Frame size 71-112, output 0.25-3.7Kw, IP55, Iso F

Site Conditions
o o
Useful used in most environments and will operate satisfactorily at temperatures from-20 C to +40 C and at altitudes up to 1000 metres
above sea level. For special environmental conditions,please consult our technical department.

Voltage and Frequency

230/400V ¡÷/ Y 50Hz (PN)/275/480V ¡÷/ Y 60Hz(PN *1.2)
400/690V ¡÷/ Y 50Hz (PN)/480/830V ¡÷/ Y 60Hz(PN *1.2)
Our motors are suitable for a voltage range of+/-5% from the normal value, voltages beyond these limits will cause a high winding
temperature rise.
Other voltages and/or frequencies are available on request.

Terminal box
The terminal box is sealed to IP55 and located on top as standard , By special order the terminal box may be located on the RH or LH
side.

Shaft
The centre bore in the shaft is in accordance with the standard DIN 332 sheet 1-2, form DS.

Balancing
The rotors are dynamically balanced with 1/2 key in the shaft.

Shaft roughness
The shaft is machined and suitable for mounting of V-seal or oil seal, with a roughness of 0.8 or less.

Key and keyway

According to DIN 6885, P1, form A.

- A1 -
 GENERAL INFORMATION
Type of installation:
Positioning of the motor at the place of work, in relation to the line of axis (horizontal or ver tical) and the fixing devices.
The table shows the most widespread methods of installation in relation the the construction shape.
In conformity with IEC34-7, codes l and ll are given, relative to the two systems of classification used.
The motor identification plate gives the construction shape (IMB3, IMB5, IMB14, IMB34, IMB35, IMB10, IMB9) independently of the
type of installation.

Type of construction
with fixing feet
IMB3

Code I IM B3 IM V5 IM V6 IM B6 IM B7 IM B8
Code II IM 1001 IM 1011 IM 1031 IM 1051 IM 1061 IM 1071
Type of construction
with flange with through
holes on drive side
FF IMB5

Code I IM B5 IM V1 IM V3
Code II IM 3001 IM 3011 IM 3031
Type of construction
with flange with threaded
holes on drive side
FT IMB14

Code I IM B14 IM V18 IM V19

Code II IM 3601 IM 3611 IM 3631
Type of construction
with fixing feet and
flange with through holes
type FF on drive side
IMB35
Code I IM B35 IM V15 IM V36
Code II IM 2001 IM 2011 IM 2031
Type of construction
with fixing feet and flange
with threaded holes type
FT on drive side
IMB34
Code I IM B34 IM V15 IM V36
Code II IM 2101 IM 2111 IM 2131
Type of construction
without shield support
or flange on drive side
IMB9

Code I IM B9 IM V8 IM V9
Code II IM 9101 IM 9111 IM 9131
Type of construction
with special flange
on drive side
IMB10

Code I IM B10 IM V10 IM V14

Code II IM 4001 IM 4011 IM 4031

- A2 -
GENERAL INFORMATION
Bearings
Our motors are equipped as standard with quality bearings from C&U,NSK,NTN,SKF
All bearings are protected from the external environment with oil seals on the drive and non drive end.
Grease nipple for frame size 180 and up.
Size and type of bearings are given as bellows:

Frame Size Poles Drive End Non - Drive End

56 2-4 6201 ZZ C3 6201 ZZ C3
63 2-4 6201 ZZ C3 6201 ZZ C3
71 2-6 6202 ZZ C3 6202 ZZ C3
80 2-8 6204 ZZ C3 6204 ZZ C3
90 2-8 6205 ZZ C3 6205 ZZ C3
100 2-8 6206 ZZ C3 6206 ZZ C3
112 2-8 6306 ZZ C3 6306 ZZ C3
132 2-8 6308 ZZ C3 6308 ZZ C3
160 2-8 6309 ZZ C3 6309 ZZ C3
180 2-8 6311 C3 6311 C3
200 2-8 6312 C3 6312 C3
225 2-8 6313 C3 6313 C3
250 2-8 6314 C3 6314 C3
2 6314 C3 6314 C3
280
4-8 6317 C3 6317 C3
2 6317 C3 6317 C3
315
4-10 NU 319 C3 6319 C3
2 6319 C3 6319 C3
355
4-10 NU 322 C3 NU 322 C3

Overload capacities
In compliance with IEC34 part 1,all motors can be exposed to the following overload conditions:
1.5 times the rated current for 2 min.
1.6 times the rated torque for 15 sec.
Both conditions apply to the rated voltage and rated frequency.

Guarantee
Our guarantee expires after 12 months from date of installation or 18 months after date of shipment, whatever comes first.
It only covers the replacement or repair free of charge of the defective units or parts provided that we admit that said faults
or defects are to be ascribed to manufacturing processes. The customer does not have to feel entitled to cancel or reduce
the outstanding orders because of defective material previously supplied. We will not be responsible for the payment of any
charges related to goods to be replaced or repaired under guarantee. Returns of material will only be accepted if both back
and forth transport charges will be covered by the customer. Our guarantee becomes completely null and void if units result
altered or repaired. For alternation it is included also the application of the motor out of the ambit and circle of our Society.
Our guarantee not cover defects of faults which would be attributed to external factors, insufficient maintenance, overload,
inadequate lubrication, unproper selection, mounting errors or shipping damages being shipment risks and expenses on
behalf of the customer.

We reserve the right to make changes to the performance data and dimensions in this catalogue without notice, This
information is for reference only.
Furthermore we reserve the prohibition to reproduce or publish pages or whole parts of this catalogue without
authorization

- A3 -
 EFF 2 MA MOTOR
GENERAL INTRODUCTION
MA series three-phase aluminum housing industry motors are made with casting aluminum alloy for the housing, end shields and
terminal box. The direction of wiring out of terminal box can be rotated at multi direction, the motor feet can be removed and suitable different
installation ways and apply fields. MA series motors are in conformity with IEC/DIN standards and meet or exceed the efficiency EFF2
required by EU/CEMEP. fitable for the common sites and concise machineries that have no special requirements including reducers,
comperessors, pumps, assembling line, packing machines, foodstuff processing machineries, etc. The features and operating conditions
are as followings:
¡ñ Moveable feet ¡ñ Insulation Class: F, with temperature rise class B

¡ñ High accuracy, light weight and beautiful appearance ¡ñDuty: Continuous (S1)

¡ñ Totally enclosed fan cooled (IC411 in accordance with IEC60034-6) ¡ñ Connection: Star-connection for 3kw or less and
¡ñ Rated voltage: 380V, 400V, 415V delta-connection for 4kw or more
o o
¡ñ Rated Frequency: 50HZ, 60HZ ¡ñ Ambient temperature: -20 C¡Ü0¡Ü40 C

¡ñ Protection: IP55 ¡ñ The altitude does not exceed 1000 meters above sea level

EXPLODED VIEW FOR SPARE PARTS

NEW

1. B5 Flange 6. Oil seal (V ring) 11. Bearing 16. Circlip 21. Washer 26. Cable gland
2. Gasket 7. Bolt 12. Stator 17. Rear Endshield 22. Fan clamp 27. Terminal board
3. B14 Flange 8. Spring Washer 13. Feet 18. Fan 23. Terminal box lid
4. Frame 9. Front Endshield 14. Nameplate 19. Fan cowl 24. Terminal box base
5. Key 10. Wave washer 15. Rotor 20. Screw 25. Washer

- A4 -
MA MOTOR EFF 2

PERFORMANCE DATA 2 POLE. 3000 RPM SYNCHRONOUS SPEED 50Hz

OUTPUT SPEED IFL IFL IFL EFFICIENCY POWER FACTOR Weight
IST TST TMAX
TYPE 380V 400V 415V
Kw Hp r/min (AMPS) (AMPS) (AMPS) % COS ¦µ IN TN TN (kg)

MA 56 K 2 0.09 0.12 2800 0.323 0.31 0.30 62.0 0.68 6.0 2.2 2.3 3.4
MA 56 G 2 0.12 0.18 2800 0.382 0.36 0.35 67.0 0.71 6.0 2.2 2.3 3.8
MA 63 K 2 0.18 0.25 2800 0.53 0.50 0.49 69.0 0.75 6.0 2.2 2.3 5.2
MA 63 G 2 0.25 0.37 2800 0.67 0.64 0.61 72.0 0.78 6.0 2.2 2.3 5.8
MA 71 K 2 0.37 0.50 2800 0.95 0.9 0.87 73.5 0.80 6.0 2.2 2.3 7.8
MA 71 G 2 0.55 0.75 2800 1.35 1.28 1.24 75.0 0.82 6.0 2.2 2.3 6.5
MA 80 K 2 0.75 1 2840 1.78 1.69 1.63 75.0 0.83 6.0 2.2 2.3 11.5
MA 80 G 2 1.1 1.5 2840 2.49 2.37 2.28 77.0 0.84 7.0 2.2 2.3 12
MA 90 S 2 1.5 2 2840 3.34 3.17 3.06 79.0 0.84 7.0 2.2 2.3 13.5
MA 90 L 2 2.2 3 2840 4.69 4.46 4.29 81.0 0.85 7.0 2.2 2.3 15
MA 100 L 2 3 4 2880 6.14 5.83 5.62 83.0 0.87 7.5 2.2 2.3 25
MA 112 M 2 4 5.5 2890 7.83 7.44 7.17 85.0 0.88 7.5 2.2 2.3 28
MA 132 S 2 5.5 7.5 2900 10.7 10.17 9.80 86.0 0.88 7.5 2.2 2.3 39
MA 132 SX 2 7.5 10 2900 14.2 13.49 13.00 87.0 0.88 7.5 2.2 2.3 41
MA 160 M 2 11 15 2930 20.9 19.9 19.2 88.7 0.90 7.5 2.2 2.3 69
MA 160 MX 2 15 20 2930 28.3 26.9 25.9 89.5 0.90 7.5 2.2 2.3 78
MA 160 L 2 18.5 25 2930 34.1 32.4 31.2 90.5 0.91 7.5 2.2 2.3 90

PERFORMANCE DATA 4 POLE. 1500 RPM SYNCHRONOUS SPEED 50Hz

OUTPUT SPEED IFL IFL IFL EFFICIENCY POWER FACTOR Weight
IST TST TMAX
TYPE 380V 400V 415V
Kw Hp r/min (AMPS) (AMPS) (AMPS) % COS ¦µ IN TN TN (kg)

MA 56 K 4 0.06 0.09 1400 0.28 0.27 0.26 56.0 0.58 6.0 2.2 2.3 3.3
MA 56 G 4 0.09 0.12 1400 0.385 0.37 0.35 58.0 0.61 6.0 2.2 2.3 3.5
MA 63 K 4 0.12 0.18 1400 0.48 0.46 0.44 60.0 0.63 6.0 2.2 2.3 4.2
MA 63 G 4 0.18 0.25 1400 0.65 0.62 0.60 64.0 0.66 6.0 2.2 2.3 4.5
MA 71 K 4 0.25 0.37 1400 0.83 0.79 0.76 67.3 0.68 6.0 2.2 2.3 6
MA 71 G 4 0.37 0.50 1400 1.12 1.06 1.03 70 0.72 6.0 2.2 2.3 6.3
MA 80 K 4 0.55 0.75 1400 1.54 1.46 1.41 71.8 0.75 5.2 2.4 2.3 8
MA 80 G 4 0.75 1 1400 1.99 1.89 1.82 73.5 0.76 6.0 2.3 2.3 9.2
MA 90 S 4 1.1 1.5 1400 2.8 2.66 2.56 76.5 0.77 6.0 2.3 2.3 11
MA 90 L 4 1.5 2 1400 3.65 3.47 3.34 78.6 0.79 6.0 2.3 2.3 14
MA 100 L 4 2.2 3 1420 5.05 4.80 4.62 82 0.81 7.0 2.3 2.3 19.2
MA 100 LX 4 3 4 1420 6.64 6.31 6.08 83 0.82 7.0 2.3 2.3 22.5
MA 112 M 4 4 5.5 1440 8.62 8.19 7.89 85 0.82 7.0 2.3 2.3 28.5
MA 132 S 4 5.5 7.5 1440 11.5 10.93 10.53 86.6 0.83 7.0 2.3 2.3 40
MA 132 M 4 7.5 10 1440 15.3 14.54 14.01 87.6 0.84 7.0 2.3 2.3 47
MA 160 M 4 11 15 1460 22.2 21.1 20.3 88.5 0.85 7.0 2.3 2.3 78
MA 160 L 4 15 20 1460 29.8 28.3 27.3 89.9 0.85 7.0 2.3 2.3 90

- A5 -
 EFF 2 MA MOTOR

PERFORMANCE DATA 6 POLE. 1000 RPM SYNCHRONOUS SPEED 50Hz

OUTPUT SPEED IFL IFL IFL EFFICIENCY POWER FACTOR Weight
IST TST TMAX
TYPE 380V 400V 415V
Kw Hp r/min (AMPS) (AMPS) (AMPS) % COS ¦µ IN TN TN (kg)

MA 71 K 6 0.18 0.25 900 0.79 0.75 0.72 57.0 0.66 4.0 1.9 2.0 6

MA 71 G 6 0.25 0.37 900 0.97 0.92 0.89 60.0 0.68 4.0 1.9 2.0 6.3

MA 80 K 6 0.37 0.50 900 1.27 1.21 1.16 63.0 0.70 4.7 1.9 2.0 8.5

MA 80 G 6 0.55 0.75 900 1.74 1.65 1.59 66.0 0.72 4.7 1.9 2.1 9.6

MA 90 S 6 0.75 1 910 2.23 2.12 2.04 70.0 0.72 5.5 2.0 2.1 13

MA 90 L 6 1.1 1.5 910 3.1 2.95 2.84 73.3 0.73 5.5 2.0 2.1 14

MA 100 L 6 1.5 2 940 3.89 3.7 3.56 77.5 0.75 5.5 2.0 2.1 18

MA 112 M 6 2.2 3 940 5.46 5.19 5.0 80.0 0.76 6.5 2.0 2.1 24.5

MA 132 S 6 3 4 960 7.1 6.75 6.50 82.0 0.76 6.5 2.1 2.1 39

MA 132 M 6 4 5.5 960 9.3 8.84 8.52 83.0 0.76 6.5 2.1 2.1 41.5

MA 132 MX 6 5.5 7.5 960 12.5 11.9 11.5 85.4 0.78 6.5 2.1 2.1 55

MA 160 M 6 7.5 10 970 16.8 16.0 15.4 87.0 0.78 6.5 2.1 2.1 78

MA 160 L 6 11 15 970 23.7 22.5 21.7 88.3 0.80 6.5 2.1 2.1 90

PERFORMANCE DATA 8 POLE. 800 RPM SYNCHRONOUS SPEED 50Hz

OUTPUT SPEED IFL IFL IFL EFFICIENCY POWER FACTOR Weight

IST TST TMAX
TYPE 380V 400V 415V
Kw Hp r/min (AMPS) (AMPS) (AMPS) % COS ¦µ IN TN TN (kg)

MA 80 K 8 0.18 0.25 690 0.86 0.82 0.79 52.0 0.61 3.3 1.8 1.9 10

MA 80 G 8 0.25 0.37 690 1.14 1.08 1.04 54.6 0.61 3.3 1.8 1.9 11

MA 90 S 8 0.37 0.50 690 1.47 1.4 1.35 62.8 0.61 4.0 1.8 1.9 13

MA 90 L 8 0.55 0.75 690 2.1 2.0 1.92 63.5 0.61 4.0 1.8 2.0 14

MA 100 L 8 0.75 1 700 2.34 2.22 2.14 72.1 0.67 4.0 1.8 2.0 23

MA 100 LX 8 1.1 1.5 700 3.22 3.06 2.95 74.0 0.69 5.0 1.8 2.0 25

MA 112 M 8 1.5 2 700 4.41 4.19 4.04 76.0 0.69 5.0 1.8 2.0 28

MA 132 S 8 2.2 3 710 6.0 5.7 5.49 79.2 0.71 6.0 1.8 2.0 45

MA 132 M 8 3 4 710 7.6 7.22 6.96 80.0 0.73 6.0 1.8 2.0 55

MA 160 M 8 4 5.5 720 10.0 9.5 9.2 82.0 0.74 6.0 1.9 2.0 69

MA 160 MX 8 5.5 7.5 720 13.3 12.6 12.1 84.0 0.75 6.0 2.0 2.0 78

MA 160 L 8 7.5 10 720 17.6 16.8 16.2 86.1 0.75 6.0 2.0 2.0 90

- A6 -
MA MOTOR EFF 2

MA56-160 IMB3

MA56-160 IMB5/B35

Frame A AB AC AD B C D DH E F G H K KK L M N P S T

MA56 90 115 110 100 71 36 9 M4x12 20 3 7.2 56 5.8 1-M20x1.5 170 100 80 120 ¨ 7 3
+0.008
MA63 100 135 130 115 80 40 11 -0.003 M4x12 23 ¡À0.26 4 8.5 63 7 1-M20x1.5 225 115 95 140 ¨ 10 3

MA71 112 150 145 120 90 45 14 M5x12 30 5 11 71 7 1-M20x1.5 250 130 110 160 ¨ 10 3.5
¡À1.5
MA80 125 165 175 145 100 50 19 M6x16 40 6 15.5 80 10 1-M25x1.5 295 165 130 200 ¨ 12 3.5

MA90S 140 180 195 155 100 56 24 M8x19 50 ¡À0.31 8 20 90 10 1-M25x1.5 315 165 130 200 ¨ 12 3.5
+0.009
MA90L 140 180 195 155 125 56 24 M8x19 50 8 20 90 10 1-M25x1.5 340 165 130 200 ¨ 12 3.5
-0.004
MA100L 160 205 215 180 140 63 28 M10x22 60 8 24 100 12 1-M32x1.5 385 215 180 250 ¨ 15 4

MA112M 190 230 240 190 140 70 28 M10x22 60 8 24 112 12 2-M32x1.5 400 215 180 250 ¨ 15 4
¡À2.0 ¡À0.37
MA132S 216 270 275 210 140 89 38 M12x28 80 10 33 132 12 2-M32x1.5 470 265 230 300 ¨ 15 4

MA132M 216 270 275 210 178 89 38 +0.018 M12x28 80 10 33 132 12 2-M32x1.5 510 265 230 300 ¨ 15 4

MA160M 254 320 330 255 210 108 42 +0.002 M16x36 110 12 37 160 15 2-M40x1.5 615 300 250 350 ¨ 19 5
¡À3.0 ¡À0.43
MA160L 254 320 330 255 254 108 42 M16x36 110 12 37 160 15 2-M40x1.5 670 300 250 350 ¨ 19 5

- A7 -
 EFF 2 MA MOTOR
MA56-160 IMB14A

MA56-132 IMB14B

MA56-160 B14A . B14B

B14A B14B
Frame AC AD D DH E F G KK L
M N P S T M N P S T
MA56 110 100 9 M4x12 20 3 7.2 1-M20x1.5 170 65 50 80 M5 2.5 85 70 105 M6 2.5
+0.008
MA63 130 115 11 M4x12 23 ¡À0.26 4 8.5 1-M20x1.5 225 75 60 90 M5 2.5 85 70 105 M6 2.5
-0.003
MA71 145 120 14 M5x12 30 5 11 1-M20x1.5 250 85 70 105 M6 2.5 115 95 140 M8 3

MA80 175 145 19 M6x16 40 6 15.5 1-M25x1.5 295 100 80 120 M6 3 130 110 160 M8 3.5

MA90S 195 155 24 M8x19 50 ¡À0.31 8 20 1-M25x1.5 315 115 95 140 M8 3 130 110 160 M8 3.5
+0.009
MA90L 195 155 24 M8x19 50 8 20 1-M25x1.5 340 115 95 140 M8 3 130 110 160 M8 3.5
-0.004
MA100L 215 180 28 M10x22 60 8 24 1-M32x1.5 385 130 110 160 M8 3.5 165 130 200 M10 3.5

MA112M 240 190 28 M10x22 60 8 24 2-M32x1.5 400 130 110 160 M8 3.5 165 130 200 M10 3.5
¡À0.37
MA132S 272 210 38 M12x28 80 10 33 2-M32x1.5 470 165 130 200 M10 3.5 215 180 250 M12 4

MA132M 272 210 38 +0.018 M12x28 80 10 33 2-M32x1.5 510 165 130 200 M10 3.5 215 180 250 M12 4
+0.002
MA160M 330 255 42 M16x36 110 12 37 2-M40x1.5 615 215 180 250 M12 4 - - - - -
¡À0.43
MA160L 330 255 42 M16x36 110 12 37 2-M40x1.5 670 215 180 250 M12 4 - - - - -

- A8 -
 EFF 2 M MOTOR
PERFORMANCE DATA
Synchronous Speed 3000 r/min (2 poles) 400V/50Hz
Rated Locked Locked Max.
Output Full Load Current Torque Torque Moment Weight
of Interia
TYPE Current Speed Eff Power Rated Rated Rated
J=1/4GD2
Kw Hp in 400V Factor Current Torque Torque kg
A r/min % cos ¦Õ kgm2
Ist/In Tst/TN Tmax/TN

M 63 K 2 0.18 0.25 0.50 2800 66 0.80 5.5 2.2 2.2 0.0003 14

M 63 G 2 0.25 0.33 0.66 2800 69 0.81 5.5 2.2 2.2 0.0004 14.5

M 71 K 2 0.37 0.50 0.94 2800 71 0.81 6.1 2.2 2.2 0.00055 15

M 71 G 2 0.55 0.75 1.33 2800 74 0.82 6.1 2.2 2.3 0.0006 15.5

M 80 K 2 0.75 1 1.74 2845 75 0.83 6.1 2.2 2.3 0.0008 16.5

M 80 G 2 1.1 1.5 2.45 2840 77 0.84 7.0 2.2 2.3 0.001 17.5

M 90 S 2 1.5 2 3.26 2840 79 0.84 7.0 2.2 2.3 0.00014 21

M 90 L 2 2.2 3 4.61 2840 81 0.85 7.0 2.2 2.3 0.0015 25

M 100 L 2 3 4 6.0 2860 83 0.87 7.5 2.2 2.3 0.0035 33

M 112 M 2 4 5.5 7.72 2880 85 0.88 7.5 2.2 2.3 0.0065 41

M 132 S 2 5.5 7.5 10.2 2900 86 0.88 7.5 2.2 2.3 0.0126 57

M 132 SX 2 7.5 10 14.0 2900 87 0.88 7.5 2.2 2.3 0.0146 63

M 160 M 2 11 15 19.9 2930 88 0.89 7.5 2.2 2.3 0.0461 102

M 160 MX 2 15 20 26.5 2900 89 0.89 7.5 2.2 2.3 0.0553 113

M 160 L 2 18.5 25 32.2 2930 90 0.90 7.5 2.2 2.3 0.0679 128

M 180 M 2 22 30 38.5 2940 90 0.90 7.5 2.0 2.3 0.0828 164

M 200 L 2 30 40 52.1 2950 91.2 0.90 7.5 2.0 2.3 0.129 213

M 200 LX 2 37 50 63.3 2950 92 0.90 7.5 2.0 2.3 0.151 237

M 225 M 2 45 60 77.0 2970 92.3 0.90 7.5 2.0 2.3 0.237 283

M 250 M 2 55 75 94.6 2970 92.5 0.90 7.5 2.0 2.3 0.354 362

M 280 S 2 75 100 126.6 2970 93 0.90 7.5 2.0 2.3 0.546 487

M 280 M 2 90 125 150.3 2970 93.8 0.91 7.5 2.0 2.3 0.621 558

M 315 S 2 110 150 185.3 2980 94 0.91 7.1 1.8 2.2 1.35 882

M 315 M 2 132 180 220.0 2980 94.5 0.91 7.1 1.8 2.2 1.5 972

M 315 L 2 160 220 265.6 2980 94.6 0.92 7.1 1.8 2.2 1.67 1044

M 315 LX 2 200 270 330.3 2980 94.8 0.92 7.1 1.8 2.2 3.32 1071

M 355 M 2 250 340 412 2980 95.3 0.92 7.1 1.6 2.2 2.56 1900

M 355 L 2 315 420 517 2980 95.6 0.92 7.1 1.6 2.2 3.34 2300

- A10 -
M MOTOR EFF 2

PERFORMANCE DATA Synchronous Speed 1500 r/min (4 poles) 400V/50Hz

Rated Locked Locked Max.
Output Full Load Current Torque Torque Moment Weight
of Interia
TYPE Current Speed Eff Power Rated Rated Rated
J=1/4GD2
Kw Hp in 400V Factor Current Torque Torque kg
A r/min % cos ¦Õ kgm2
Ist/In Tst/TN Tmax/TN

M 63 K 4 0.12 0.16 0.42 1320 57 0.72 2.1 4.4 2.2 0.00009 13

M 63 G 4 0.18 0.25 0.52 1320 70 0.72 3.6 2.4 2.5 0.00010 13.5

M 71 K 4 0.25 0.33 0.73 1350 70.6 0.70 4.1 2.5 3.0 0.0011 14

M 71 G 4 0.37 0.50 1 1340 71 0.75 4.1 2.5 3.1 0.0012 14.5

M 80 K 4 0.55 0.75 1.4 1390 72.8 0.75 5.3 2.5 2.5 0.0013 15

M 80 G 4 0.75 1 1.91 1380 74.4 0.76 6.0 2.3 2.3 0.0013 16

M 90 S 4 1.1 1.5 2.71 1390 76.2 0.77 6.0 2.3 2.3 0.002 23

M 90 L 4 1.5 2 3.49 1390 78.5 0.79 6.0 2.3 2.3 0.0027 25

M 100 L 4 2.2 3 4.84 1410 81 0.81 7.0 2.3 2.3 0.0062 33

M 100 LX 4 3 4 6.39 1410 82.6 0.82 7.0 2.3 2.3 0.0070 35

M 112 M 4 4 5.5 8.36 1435 84.2 0.82 7.0 2.3 2.3 0.0119 41

M 132 S 4 5.5 7.5 10.9 1400 85 0.83 7.0 2.3 2.3 0.0251 61

M 132 M 4 7.5 10 14.5 1440 87 0.84 7.0 2.3 2.3 0.034 73

M 160 M 4 11 15 21.1 1460 88 0.84 7.0 2.2 2.3 0.0870 115

M 160 L 4 15 20 28.3 1460 89 0.85 7.5 2.2 2.3 0.1078 132

M 180 M 4 18.5 25 34.3 1470 90.5 0.86 7.5 2.2 2.3 0.1528 159

M 180 L 4 22 30 40.5 1470 91 0.86 7.5 2.2 2.3 0.1557 172

M 200 L 4 30 40 54.3 1470 92 0.86 7.2 2.2 2.3 0.2564 234

M 225 S 4 37 50 66.1 1480 92.5 0.87 7.2 2.2 2.3 0.4365 268

M 225 M 4 45 60 79.8 1480 92.8 0.87 7.2 2.2 2.3 0.5458 302

M 250 M 4 55 75 97.8 1480 93 0.87 7.2 2.2 2.3 0.7293 383

M 280 S 4 75 100 131.1 1480 93.8 0.87 7.2 2.2 2.3 1.26 550

M 280 M 4 90 125 157.3 1480 94.2 0.87 7.2 2.2 2.3 1.65 614

M 315 S 4 110 150 190.2 1490 94.5 0.88 6.9 2.1 2.2 1.98 893

M 315 M 4 132 180 227.1 1490 94.8 0.88 6.9 2.1 2.2 2.61 990

M 315 L 4 160 220 273.6 1490 94.9 0.89 6.9 2.1 2.2 3.25 1045

M 315 LX 4 200 270 341 1490 95.0 0.89 6.9 2.1 2.2 3.86 1192

M 355 M 4 250 340 421 1490 95.3 0.90 6.9 2.1 2.2 6.42 1700

M 355 L 4 315 420 528 1490 95.6 0.90 6.9 2.1 2.2 7.95 1900

- A11 -
 EFF 2 M MOTOR
PERFORMANCE DATA Synchronous Speed 1000 r/min (6 poles) 400V/50Hz
Rated Locked Locked Max.
Output Full Load Current Torque Torque Moment Weight
of Interia
TYPE Current Speed Eff Power Rated Rated Rated
J=1/4GD2
Kw Hp in 400V Factor Current Torque Torque kg
A r/min % cos ¦Õ kgm2
Ist/In Tst/TN Tmax/TN

M 71 K 6 0.18 0.25 0.70 900 57 0.66 4.0 1.9 2.0 0.0011 14

M 71 G 6 0.25 0.33 0.90 900 60 0.68 4.0 1.9 2.0 0.0014 14.5

M 80 K 6 0.37 0.50 1.24 900 66.5 0.70 4.7 1.9 2.0 0.0016 15

M 80 G 6 0.55 0.75 1.70 900 68.2 0.66 4.7 1.9 2.1 0.0019 16

M 90 S 6 0.75 1 2.12 910 71 0.72 5.5 2.0 2.1 0.0033 19

M 90 L 6 1.1 1.5 2.98 910 73 0.73 5.5 2.0 2.1 0.0040 22

M 100 L 6 1.5 2 3.85 920 76 0.75 5.5 2.0 2.1 0.0082 32

M 112 M 6 2.2 3 5.36 935 79 0.76 6.5 2.0 2.1 0.0147 41

M 132 S 6 3 4 6.7 960 81 0.76 6.5 2.1 2.1 0.0343 53

M 132 M 6 4 5.5 8.8 960 82 0.76 6.5 2.1 2.1 0.0429 61

M 132 MX 6 5.5 7.5 11.7 960 84 0.77 6.5 2.1 2.1 0.0543 70

M 160 M 6 7.5 10 15.9 970 86 0.77 6.5 2.0 2.1 0.1003 101

M 160 L 6 11 15 22.4 970 87.5 0.78 6.5 2.0 2.1 0.1336 120

M 180 L 6 15 20 29.2 970 89 0.81 7.0 2.0 2.1 0.2332 170

M 200 L 6 18.5 25 35.8 970 90.0 0.81 7.0 2.1 2.1 0.3532 187

M 200 LX 6 22 30 41.90 970 90.1 0.83 7.0 2.1 2.1 0.3401 210

M 225 M 6 30 40 55.50 980 91.5 0.84 7.0 2.0 2.1 0.5793 288

M 250 M 6 37 50 66.90 980 92.0 0.86 7.0 2.1 2.1 0.9524 367

M 280 S 6 45 60 81.10 980 92.5 0.86 7.0 2.1 2.0 1.31 483

M 280 M 6 55 75 98.10 980 92.8 0.86 7.0 2.1 2.0 1.54 550

M 315 S 6 75 100 133.2 990 93.5 0.86 7.0 2.0 2.0 3.55 930

M 315 M 6 90 125 158.70 990 93.8 0.86 7.0 2.0 2.0 4.17 950

M 315 L 6 110 150 192.2 990 94.0 0.86 6.7 2.0 2.0 5.10 1092

M 315 LX 6 132 180 230.2 990 94.2 0.87 6.7 2.0 2.0 6.17 1150

M 355 M 6 160 220 276.5 990 94.9 0.88 6.7 1.9 2.0 7.29 1550

M 355 MX 6 200 270 346.4 990 94.7 0.88 6.7 1.9 2.0 8.67 1600

M 355 L 6 250 340 433 990 94.7 0.88 6.7 1.9 2.0 11.04 1700

- A12 -
M MOTOR EFF 2

PERFORMANCE DATA Synchronous Speed 750 r/min (8 poles) 400V/50Hz

Rated Locked Locked Max.
Output Full Load Current Torque Torque Moment
Weight
of Interia
TYPE Current Speed Eff Power Rated Rated Rated
Kw Hp in 400V Factor Current Torque Torque J=1/4GD2 kg
A r/min % cos ¦Õ Ist/In Tst/TN Tmax/TN kgm2
M 80 K 8 0.18 0.25 0.84 690 52 0.61 3.3 1.8 1.9 0.0025 22
M 80 G 8 0.25 0.33 1.09 690 54.6 0.61 3.3 1.8 1.9 0.003 24
M 90 S 8 0.37 0.50 1.42 690 62.8 0.61 4.0 1.8 1.9 0.0051 26
M 90 L 8 0.55 0.75 2.06 690 63.5 0.61 4.0 1.8 2.0 0.0065 28
M 100 L 8 0.75 1 2.3 680 71.0 0.67 4.0 1.8 2.0 0.00576 30
M 100 LX 8 1.1 1.5 3.2 680 73.0 0.69 5.0 1.8 2.0 0.00716 32
M 112 M 8 1.5 2 4.2 690 75.0 0.69 5.0 1.8 2.0 0.01263 40
M 132 S 8 2.2 3 5.7 710 78.0 0.71 6.0 1.8 2.0 0.03489 56
M 132 M 8 3 4 7.2 710 79.0 0.73 6.0 1.8 2.0 0.04372 71
M 160 M 8 4 5.5 9.5 720 81.0 0.73 6.0 1.9 2.0 0.07846 97
M 160 MX 8 5.5 7.5 12.6 720 83.0 0.74 6.0 2.0 2.0 0.101 106
M 160 L 8 7.5 10 16.9 720 85.5 0.75 6.0 2.0 2.0 0.134 126
M 180 L 8 11 15 23.7 730 87.5 0.76 6.6 2.0 2.0 0.2181 168
M 200 L 8 15 20 31.6 730 88.0 0.76 6.6 2.0 2.0 0.3579 220
M 225 S 8 18.5 25 38.1 730 90.0 0.76 6.6 1.9 2.0 0.5172 226
M 225 M 8 22 30 44.5 740 90.5 0.78 6.6 1.9 2.0 0.616 248
M 250 M 8 30 40 59.9 740 91.0 0.79 6.6 1.9 2.0 0.838 344
M 280 S 8 37 50 72.4 740 91.5 0.79 6.6 1.9 2.0 1.56 468
M 280 M 8 45 60 87.9 740 92.0 0.79 6.6 1.9 2.0 1.86 503
M 315 S 8 55 75 104.9 740 92.8 0.81 6.6 1.8 2.0 3.37 900
M 315 M 8 75 100 140.7 740 93.0 0.81 6.6 1.8 2.0 4.5 980
M 315 L 8 90 125 168.7 740 93.8 0.82 6.6 1.8 2.0 5.3 1100
M 315 LX 8 110 150 205.0 740 94.0 0.82 6.4 1.8 2.0 6.2 1120
M 355 M 8 132 180 246.1 740 94.4 0.82 6.4 1.8 2.0 9.51 2000
M 355 MX 8 160 220 297.4 740 94.7 0.82 6.4 1.8 2.0 10.8 2150
M 355 L 8 200 270 369 745 94.8 0.84 6.4 1.8 2.0 12.3 2250

PERFORMANCE DATA Synchronous Speed 600 r/min (10 poles) 400V/50Hz

Rated Locked Locked Max.
Output Full Load Current Torque Torque Moment
Weight
of Interia
TYPE Current Speed Eff Power Rated Rated Rated
J=1/4GD2
Kw Hp in 400V Factor Current Torque Torque kg
A r/min % cos ¦Õ Ist/In Tst/TN Tmax/TN kgm2
M 315 S 10 45 60 99.6 590 91.5 0.75 6.2 1.5 2.0 5.1 818
M 315 M 10 55 75 121.1 590 92.0 0.75 6.2 1.5 2.0 6.1 928
M 315 L 10 75 100 162.1 590 92.5 0.76 6.2 1.5 2.0 6.9 1080
M 315 LX 10 90 125 191 590 93.0 0.77 6.2 1.5 2.0 7.2 1200
M 355 M 10 110 150 219 590 93.2 0.78 6.0 1.3 2.0 12.5 1800
M 355 MX 10 132 180 261 590 93.5 0.78 6.0 1.3 2.0 13.7 2000
M 355 L 10 160 220 317 590 93.5 0.78 6.0 1.3 2.0 14.8 2500

- A13 -
 M 63-90 M 100-355 M 63-355

Dimensions in mm
Type Poles A AB AC B C D DA E EA H HD K L
M 63 2/4 100 135 130 80 40 11j6 11j6 23 23 63 180 230
7
M 71 2/4/6 112 150 145 90 45 14j6 14j6 30 30 71 195 255
M 80 K /G 125 165 175 50 19j6 19j6 40 40 80 220 295
100
M 90 S 10 320
140 180 195 56 24j6 24j6 50 50 90 250
M 90 L 125 345
M 100 L/LX 160 205 215 63 100 270 385
28j6 28j6 60 60
- A14 -

M 112 M 190 230 240 140 70 112 300 400

12
M 132 S/SX 2/4/6/8 470
216 270 275 89 38k6 38k6 80 80 132 345
M 132 M 178 510

M 63-355: IMB3
M 160 M/MX 210 615
254 320 330 108 42k6 42k6 160 420
M 160 L 254 670
15
M 180 M 241 700
279 355 380 121 48k6 48k6 110 180 455
M 180 L 279 740
M 200 L/LX 2 48k6
318 395 420 305 133 55m6 200 505 770
M 200 L/LX 4/6/8
55m6
M 225 S 4/8 286 60m6 140 110 19 815
M 225 M 2 356 435 470 149 55m6 48k6 110 225 560 820
311
M 225 M 4/6/8 845
60m6
M 250 M 2
406 490 510 349 168 55m6 250 615 910
M 250 M 4/6/8
65m6
M 280 S 2
368 24 985
M 280 S 4/6/8 75m6 60m6 140 140
457 550 580 190 280 680

M MOTOR
M 280 M 2 65m6 55m6 110
419 1035
M 280 M 4/6/8 75m6 60m6
140
M 315 S 2 65m6 65m6 1160
406
M 315 S 4 / 6 / 8 / 10 80m6 80m6 170 170 1270
M 315 M 2 216 65m6 65m6 140 140 1190
508 635 645 457 315 845
M 315 M 4 / 6 / 8 / 10 80m6 80m6 170 170 1300
M 315 L/LX 2 65m6 65m6 140 140 1190
508 28
M 315 L/LX 4 / 6 / 8 / 10 80m6 80m6 170 170 1300
M 355 M 2 75m6 75m6 140 140 1500
M 355 M 4 / 6 / 8 / 10 75m6 95m6 170 170 1530
610 730 710 630 254 355 1010
M 355 L 2 75m6 75m6 140 140 1500
M 355 L 4 / 6 / 8 / 10 95m6 95m6 170 170 1530
 M MOTOR
M 80-315 : Shaft dimensions & Terminal box EFF 2
Drive-end shaft Non drive-end shaft Terminal box

Dimensions in mm
Type Poles D E F G DB GD DA EA FA GB DC GF Eye Bolt Outlet Hole X Y Z
TM 80 K/G 19j6 40 6 15.5 M6 6 19j6 40 6 15.5 M6 6 99 99 50
TM 90 S NO 1 x M 20 x 1.5
24j6 50 20 M8 24j6 50 20 M8
TM 90 L 106 106 57
- A15 -

8 7 8 7
TM 100 L/LX 1 x M 32 x 1.5
28j6 60 24 M10 28j6 60 24 M10 M8
TM 112 M
TM 132 S/SX 2/4/6/8 2 x M 32 x 1.5 115 122 65
38k6 80 10 33 M12 38k6 80 10 33 M12 M10
TM 132 M
8 8
TM 160 M/MX
42k6 12 37 42k6 12 37
TM 160 L
M16 M12 2 x M 40 x 1.5 152 162 75
TM 180 M 48k6 M16
110 14 42.5 9 48k6
TM 180 L 14 42.5 9
TM 200 L/LX 2 48k6
55m6 16 49 10
TM 200 L/LX 4/6/8
55m6 110 16 49 M20 10
TM 225 S 4/8 60m6 140 18 53 11 M16 2 x M 50 x 1.5 190 210 101
TM 225 M 2 55m6 110 16 49 10 48k6 14 42.5 M16 9
TM 225 M 4/6/8 16
60m6 53
TM 250 M 2
18 11 55m6 49 10
TM 250 M 4/6/8
65m6 58
TM 280 S 2
140 M20 217 248 124
TM 280 S 4 /6 / 8 75m6 20 67.5 M20 12 60m6 140 18 53 11
TM 280 M 2 65m6 18 58 11 55m6 110 16 49 10
TM 280 M 4/6/8 75m6 20 67.5 12 60m6 53 M20 2 x M 63 x 1.5
140 18 11
TM 315 S 2 65m6 18 58 11 65m6 58
TM 315 S 4 / 6 / 8 / 10 80m6 170 22 71 14 80m6 170 22 71 14
TM 315 M 2 65m6 140 18 58 11 65m6 140 18 58 11
M30 281 319 174
TM 315 M 4 / 6 / 8 / 10 80m6 170 22 71 14 80m6 170 22 71 14
TM 315 L/LX 2 65m6 140 18 58 11 65m6 140 18 58 11
T1 315 L/LX 4 / 6 / 8 / 10 80m6 170 22 71 14 80m6 170 22 71 14
 EFF 2 M 63-355: IMB35
M 63-355 M 63-200 M 225-355
Dimensions in mm
Type Poles A AB AC B C D DA E EA H HD K L M N P S T
M 63 2/4 100 135 130 80 40 11j6 11j6 23 23 63 180 230 115 95 140
7 4O10 3
M 71 2 / 4 /6 112 150 145 90 45 14j6 14j6 30 30 71 195 255 130 110 160
M 80 K/G 125 165 175 50 19j6 19j6 40 40 80 214 295
100
M 90 S 10 320 165 130j6 200 4O12 3.5
140 180 195 56 24j6 24j6 50 50 90 250
M 90 L 125 345
M 100 L/LX 160 205 215 63 100 270 385
28j6 28j6 60 60 215 180j6 250
M 112 M 190 230 240 140 70 112 300 400
- A16 -

12 4O15 4
M 133 S/SX 2/4/6/8 470
216 270 275 89 38k6 38k6 80 80 132 345 265 230j6 300
M 132 M 178 510
M 160 M/MX 210 615
254 320 330 108 42k6 42k6 160 420
M 160 L 254 670
15 300 250j6 350
M 180 M 241 700
279 355 380 121 48k6 48k6 110 180 455 4O19
M 180 L 279 740
M 200 L/LX 2 48k6
318 395 420 305 133 55m6 200 505 770 350 300h6 400
M 200 L/LX 4/6/8
55m6
M 225 S 4/8 286 60m6 140 110 19 815
M 225 M 2 356 435 470 149 55m6 48k6 110 225 555 820 400 350h6 450
311 5
M 225 M 4/6/8 845
60m6
M 250 M 2
406 490 510 349 168 55m6 250 615 910
M 250 M 4/6/8 8O19
65m6
M 280 S 2 985
368 140 500 450h6 550

M MOTOR
M 280 S 4/6/8 75m6 60m6 140 24 985
457 550 580 190 280 680
M 280 M 2 65m6 55m6 110 1035
419
M 280 M 4/6/8 75m6 60m6 1035
140
M 315 S 2 65m6 65m6 1160
406
M 315 S 4 / 6 / 8 / 10 80m6 80m6 170 170 1270
M 315 M 2 216 65m6 65m6 140 140 1190
508 635 645 457 315 845 28 600 550h6 660
M 315 M 4 / 6 / 8 / 10 80m6 80m6 170 170 1300
M 315 L/LX 2 65m6 65m6 140 140 1190
508
M 315 L/LX 4 / 6 / 8 / 10 80m6 80m6 170 170 1300 8O24 6
M 355 M 2 75m6 75m6 140 140 1500
560
M 355 M 4 / 6 / 8 /10 95m6 95m6 170 170 1530
610 730 710 254 355 1010 28 740 680 800
M 355 L 2 75m6 75m6 140 140 1500
630
M 355 L 4 / 6 / 8 /10 95m6 95m6 170 170 1530
 M MOTOR
M 63-280 M 63-200 M 225-280

Dimensions in mm
Type Poles AC D DA E EA HD L M N P S T FLANGE
- A17 -

M 63 2/4 130 11j6 11j6 23 23 140 230 115 95j6 140

4O10 3 FF115
M 71 2/4/6 145 14j6 14j6 30 30 160 255 130 110j6 160
M 80 K/G 175 19j6 19j6 40 40 245 295
M 90 S 320 165 130j6 200 4O12 3.5 FF 165
195 24j6 24j6 50 50 255
M 90 L 345
M 100 L/LX 215 305 385
28j6 28j6 60 60 215 180j6 250 FF 215
M 112 M 240 315 400
4O15 4
M 132 S/SX 2/4/6/8 470

M 63-280: IMB5
275 38k6 38k6 80 80 360 265 230j6 300 FF 265
M 132 M 510
M 160 M/MX 615
330 42k6 42k6 430
M 160 L 670
300 250j6 350 FF 300
M 180 M 700
380 48k6 48k6 110 455 4O19
M 180 L 740
M 200 L/LX 2 48k6
420 55m6 505 770 350 300h6 400 FF 350
M 200 L/LX 4/6/8
55m6
M 225 S 4/8 60m6 140 110 815
M 225 M 2 470 55m6 48k6 110 560 820 400 350h6 450 5 FF 400
M 225 M 4/6/8 845
60m6
M 250 M 2
645

EFF 2
510 55m6 910
M 250 M 4/6/8 8O19
65m6
M 280 S 2 140 985
500 450h6 550 FF 500
M 280 S 4/6/8 75m6 60m6 140 985
580 685
M 280 M 2 65m6 55m6 110 1035
M 280 M 4/6/8 75m6 60m6 140 1035
 EFF 2 M 180-355: IMV1
M 180-355 M 180-200 M 225-355
- A18 -

Dimensions in mm
Type Poles AC D E HD L M N P S T FLANGE
M 180 M 760
2/4/6/8 380 48k6 530 300 250j6 350 4O19 FF 300
M 180 L 800
110
M 200 L/LX 2
420 55m6 580 840 350 300h6 400 FF 350
M 200 L/LX 4/6/8
M 225 S 4/8 60m6 140 905
M 225 M 2 470 55m6 110 640 910 400 350h6 450 FF 400
5
M 225 M 4/6/8 935
60m6
M 250 M 2
510 695 1015 8O19
M 250 M 4/6/8
65m6
M 280 S 2 FF 500
140 1110 500 450h6 550
M 280 S 4/6/8 75m6
580 770
M 280 M 2 65m6
1150
M 280 M 4/6/8 75m6

M MOTOR
M 315 S 2 65m6 1280
M 315 S 4/6/8 80m6 170 1510
M 315 M 2 65m6 140 1310
645 980 600 550h6 660 8O24 6 FF 600
M 315 M 4/6/8 80m6 170 1430
M 315 L/LX 2 65m6 140 1310
M 315 L/LX 4/6/8 80m6 170 1430
M 355 M 2 75m6 140 1640
M 355 M 4 / 6 /8 /10 95m6 170 1640
710 1055 740 680 800 8O24 6 FF740
M 355 L 2 75m6 140 1640
M 355 L 4 / 6 / 8 /10 95m6 170 1670
M MOTOR EFF 2

M 63-132: IM B34

Dimensions in mm
Type Poles A AB AC B C D DA E EA H HD K L Eye Bolt
M 63 2/4 100 135 130 80 40 11j6 11j6 23 23 63 180 230
7
M 71 2/4/6 112 150 145 90 45 14j6 14j6 30 30 71 195 255
M 80 K/G 125 165 165 50 19j6 19j6 40 40 80 214 295 NO
100
M 90 S 10 320
140 180 195 56 24j6 24j6 50 50 90 250
M 90 L 2/4/6/8 125 345
M 100 L/LX 160 205 215 63 100 270 385
140 28j6 28j6 60 60 12 M8
M 112 M 190 230 240 70 112 300 400

M 63-132: IM B14

Dimensions in mm
Small Flange (B14A) Large Flange (B14B)
Type Poles AC D DA E EA HD L Eye Bolt
P N M T S P N M T S
M 63 2/4 130 11j6 11j6 23 23 115 230 90 60 75 120 80j6 100 2.5
2.5 M5 M6
M 71 2/4/6 145 14j6 14j6 30 30 132 255 105 70 85 140 95j6 115 3.0
M 80 K/G 175 19j6 19j6 40 40 205 295 NO 120 80j6 100 M6
M 90 S 320 3 160 110j6 130 M8
195 24j6 24j6 50 50 225 140 95j6 115
M 90 L 2/4/6/8 345 3,5
M8
M 100 L/LX 215 260 385
28j6 28j6 60 60 M8 150 110j6 130 3,5 200 130j6 165 M10
M 112 M 240 270 400

- A19 -
 MD MOTOR MULTI-SPEED
Series MD motors are widely used in various mechanical equipment which needs stepped speed adjustment, so that they enable the equipment to have compact
structure, lower noise and ability to save energy.

Power Current Speed ¦Ç Power Locked-rotor Locked-rotor Pull-out Power Current Speed ¦Ç Power Locked-rotor Locked-rotor Pull-out
Type factor torque current torque Type factor torque current torque
(KW) (A) (rpm) % cos Rated torque Rated torque Rated torque (KW) (A) (rpm) % cos Rated torque Rated torque Rated torque
4 0.45 1.4 1420 66 0.74 1.5 6.5 1.8 6 22 44.2 980 88 0.86 1.4 6.5 1.8
MD80K- MD225-
2 0.55 1.5 2860 65 0.85 1.6 7 1.8 4 28 56.2 1470 87 0.87 1.3 7 1.8
4 0.55 1.7 1420 68 0.74 1.5 6.5 1.8 6 26 52.2 980 88 0.86 1.4 6.5 1.8
MD80G- MD225M-
2 0.75 2 2860 66 0.85 1.6 7 1.8 4 34 66 1470 87 0.9 1.3 7 1.8
4 0.85 2.3 1430 74 0.77 1.5 6.5 1.8 6 32 62.1 980 90 0.87 1.4 6.5 1.8
MD90S MD250M-
2 1.1 2.8 2850 72 0.84 1.6 7 1.8 4 42 74.7 1470 88 0.91 1.3 7 1.8
4 1.3 3.3 1430 76 0.78 1.5 6.5 1.8 6 42 81.5 980 90 0.87 1.4 6.5 1.8
MD90L- MD280S-
2 1.8 4.3 2850 74 0.84 1.6 7 1.8 4 55 104.2 1470 89 0.9 1.3 7 1.8
4 2 4.8 1430 78 0.81 1.5 6.5 1.8 6 55 106.7 990 90 0.87 1.4 6.5 1.8
MD100LA- MD280M-
2 2.4 5.6 2850 76 0.86 1.6 7 1.8 4 72 138.1 1480 89 0.89 1.3 7 1.8
4 2.4 5.6 1430 79 0.83 1.5 6.5 1.8 8 0.45 1.9 680 58 0.63 1.5 5.5 1.8
MD100LB- MD90L-
2 3 5.7 2850 77 0.89 1.6 7 1.8 4 0.75 1.92 1420 72 0.87 1.5 6.5 1.8
4 3.3 7.4 1450 81 0.83 1.5 6.5 1.8 8 0.85 3.1 700 68 0.63 1.5 5.5 1.8
MD112L- MD100L-
2 4 8.6 2860 80 0.88 1.6 7 1.8 4 1.5 3.5 1420 75 0.88 1.5 6.5 1.8
4 4.5 9.8 1450 83 0.84 1.5 6.5 1.8 8 1.5 5 700 72 0.63 1.5 5.5 1.8
MD132S- MD112M-
2 5.5 11.9 2860 79 0.88 1.6 7 1.8 4 2.4 5.3 1420 78 0.88 1.5 6.5 1.8
4 6.5 13.8 1450 84 0.85 1.5 6.5 1.8 8 2.2 7 720 75 0.64 1.5 5.5 1.8
MD132M- MD132S-
2 8 17.1 2880 80 0.89 1.6 7 1.8 4 3.3 7.1 1450 80 0.88 1.5 6.5 1.8
4 9 18.5 1460 87 0.85 1.5 6.5 1.8 8 3 9 720 78 0.65 1.5 5.5 1.8
MD160M- MD132M-
2 11 22.9 2920 82 0.89 1.6 7 1.8 4 4.5 9.4 1440 82 0.88 1.5 6.5 1.8
4 11 22.3 1460 87 0.86 1.5 6.5 1.8 8 5 13.9 730 83 0.66 1.5 5.5 1.8
MD160L- MD160M-
2 14 28.8 2920 82 0.9 1.6 7 1.8 4 7.5 15.2 1450 84 0.89 1.5 6.5 1.8
4 15 29.4 1470 89 0.87 1.5 6.5 1.8 8 7 19 730 85 0.66 1.5 5.5 1.8
MD180M- MD160-
2 18.5 36.7 2940 85 0.9 1.6 7 1.8 4 11 21.8 1450 86 0.89 1.5 6.5 1.8

MD180L- 4 18.5 35.9 1470 89 0.88 1.5 6.5 1.8 8 11 26 730 86 0.74 1.5 6 1.8
MD180L-
2 22 42.7 2940 86 0.91 1.6 7 1.8 4 17 31.9 1470 87 0.92 1.5 7 1.8
4 26 49.9 1470 89 0.89 1.4 6.5 1.8 8 14 33 740 86 0.74 1.5 6 1.8
MD200L- MD200LA-
2 30 58.3 2950 85 0.92 1.4 7 1.8 4 22 41.3 1470 88 0.92 1.5 7 1.8
4 32 60.7 1480 90 0.89 1.4 6.5 1.8 8 17 40.1 740 87 0.74 1.5 6 1.8
MD225S- MD200LB-
2 37 71.7 2960 86 0.92 1.4 7 1.8 4 26 48.8 1470 88 0.92 1.5 7 1.8
4 37 69.4 1480 91 0.89 1.4 6.5 1.8 8 24 53.2 740 89 0.77 1.4 6 1.8
MD225M- MD225M-
2 45 86.4 2960 87 0.92 1.4 7 1.8 4 34 66.7 1470 88 0.88 1.3 7 1.8
4 45 84.4 1480 91 0.89 1.4 6.5 1.8 8 30 64.9 740 90 0.78 1.4 6 1.8
MD250M- MD250M-
2 55 103.2 2960 88 0.92 1.4 7 1.8 4 42 78.8 1480 89 0.91 1.3 7 1.8
4 60 111.3 1480 91 0.9 1.4 6.5 1.8 8 40 83.5 740 91 0.8 1.4 6 1.8
MD280S- MD280S-
2 72 135.1 2970 88 0.92 1.4 7 1.8 4 55 102 1480 90 0.91 1.3 7 1.8
4 72 133.6 1480 91 0.9 1.4 6.5 1.8 8 47 96.9 740 91 0.81 1.4 6 1.8
MD280M- MD280M-
2 82 152.2 2970 88 0.93 1.4 7 1.8 4 67 122.9 1480 90 0.92 1.3 7 1.8
6 0.65 2.2 920 64 0.7 1.4 6.5 1.8 8 0.35 1.6 680 56 0.6 1.5 5 1.8
MD90S- MD90S-
4 0.85 2.3 1420 70 0.79 1.3 7 1.8 6 0.45 1.4 930 70 0.72 1.5 6 1.8
6 0.85 2.8 930 66 0.7 1.4 6.5 1.8 8 0.45 1.9 680 59 0.6 1.5 5 1.8
MD90L- MD90L-
4 1.1 3 1420 71 0.79 1.3 7 1.8 6 0.65 1.9 930 71 0.73 1.5 6 1.8
6 1.3 3.8 940 74 0.7 1.4 6 1.8 8 0.72 2.9 710 65 0.6 1.5 5 1.8
MD100LA- MD100L-
4 1.8 4.4 1440 77 0.8 1.3 6.5 1.8 6 1.1 3.1 950 75 0.73 1.5 6 1.8
6 1.5 4.3 940 75 0.7 1.4 6 1.8 8 1.3 4.5 710 72 0.61 1.5 5 1.8
MD100LB- MD112M-
4 2.2 5.4 1440 77 0.8 1.4 6.5 1.8 6 1.8 4.8 950 78 0.73 1.5 6 1.8
6 2.2 5.7 960 77 0.75 1.4 6 1.8 8 1.8 5.8 730 72 0.62 1.5 5 1.8
MD112M- MD132S-
4 2.8 6.7 1440 77 0.82 1.3 6.5 1.8 6 2.4 6.2 970 80 0.73 1.5 6 1.8
6 3 7.7 960 79 0.75 1.4 6 1.8 8 2.6 8.2 730 78 0.62 1.5 5 1.8
MD132S- MD132M-
4 4 9.5 1440 80 0.82 1.3 6.5 1.8 6 3.7 9.4 970 82 73 1.5 6 1.8
6 4 9.8 960 81 0.76 1.4 6 1.8 8 4.5 13.3 730 83 0.62 1.5 5 1.8
MD132M- MD160M-
4 5.5 12.3 1440 80 0.85 1.3 6.5 1.8 6 6 14.7 980 85 0.73 1.5 6 1.8
6 6.5 15.1 970 84 0.78 1.4 6 1.8 8 6 17.5 730 84 0.62 1.5 5 1.8
MD160M- MD160L-
4 8 17.4 1460 83 0.85 1.3 6.5 1.8 6 8 19.4 980 86 0.73 1.5 6 1.8
6 9 20.6 970 85 0.78 1.4 6 1.8 8 7.5 21.9 730 84 0.62 1.5 5 1.8
MD160L- MD180M-
4 11 23.4 1460 84 0.85 1.3 6.5 1.8 6 10 24.2 980 86 0.73 1.5 6 1.8
6 11 25.9 980 85 0.78 1.4 6 1.8 8 9 24.8 730 85 0.65 1.5 5 1.8
MD180M- MD180L-
4 14 29.8 1470 85 0.85 1.3 6.5 1.8 6 12 28.3 980 86 0.75 1.5 6 1.8
6 13 29.4 980 86 0.78 1.4 6 1.8 8 12 32.5 730 86 0.65 1.5 5 1.8
MD180L- MD200LA-
4 16 33.6 1470 85 0.85 1.3 6.5 1.8 6 17 39.1 980 87 0.76 1.5 6 1.8
6 18.5 41.4 980 87 0.78 1.4 6.5 1.8 8 15 40.3 730 87 0.65 1.5 5 1.8
MD200L- MD200LB-
4 22 44.7 1460 87 0.86 1.3 7 1.8 6 20 45.4 980 88 0.76 1.5 6 1.8

- A20 -
MULTI-SPEED MD MOTOR
Power Current Speed ¦Ç Power Locked-rotor Locked-rotor Pull-out Power Current Speed ¦Ç Power Locked-rotor Locked-rotor Pull-out
Type Type
factor torque current torque factor torque current torque
(KW) (A) (rpm) % cos Rated torque Rated torque Rated torque (KW) (A) (rpm) % cos Rated torque Rated torque Rated torque
8 30 58.5 730 90 0.86 1.5 5 1.8 8 1.5 5.2 730 71 0.62 1.3 5.5 1.8
MD250M
6 15 33.1 980 88 0.78 1.5 6 1.8 MD132MA 6 2 5.4 970 77 0.73 1.3 6.5 1.8
12 2.6 11.6 480 75 0.46 1.2 4 1.8 4 2.2 4.9 1460 79 0.87 1.4 7 1.8
MD160M
6 5 11.9 970 84 0.78 1.3 6 1.8 8 1.8 6.3 730 72 0.62 1.3 5.5 1.8
12 3.7 16.4 480 77 0.46 1.2 4 1.8 MD132MB 6 2.6 6.8 970 78 0.74 1.3 6.5 1.8
MD160L
6 7 15.8 970 85 0.79 1.3 6 1.8 4 3 6.5 1460 80 0.87 1.4 7 1.8
12 5.5 19.6 490 79 0.54 1.2 4 1.8 8 3.3 10.2 720 79 0.62 1.6 5.5 1.8
MD180M
6 10 20.5 980 86 0.86 1.3 6 1.8 MD160M 6 4 9.9 960 81 0.76 1.5 6.5 1.8
12 7.5 25.1 490 82 0.56 1.2 4 1.8 4 5.5 11.6 1440 83 0.87 1.4 7 1.8
MD200LA
6 13 26.4 980 87 0.86 1.3 6 1.8 8 4.5 13.8 720 80 0.62 1.6 5.5 1.8
12 9 28.9 490 87 0.57 1.2 4 1.8 MD160L 6 6 14.5 960 83 0.76 1.5 6.5 1.8
MD200LB
6 15 30.4 980 87 0.87 1.3 6 1.8 4 7.5 15.6 1440 84 0.87 1.4 7 1.8

MD225M 12 12 35.8 490 85 0.61 1.2 4 1.8 8 7 18.5 740 81 0.71 1.6 6.5 1.8
6 20 39.7 980 88 0.87 1.3 6 1.8 MD180L 6 9 20.6 980 83 0.8 1.5 7 1.8
12 15 42.9 490 86 0.63 1.2 4 1.8 4 12 24.1 1470 84 0.9 1.4 7 1.8
MD250M
6 24 47.6 980 88 0.87 1.3 6 1.8 8 10 25.8 740 83 0.71 1.6 6.5 1.8
12 20 54.8 490 88 0.63 1.2 4 1.8 MD200L 6 13 28.7 980 85 0.81 1.5 7 1.8
MD280S
6 30 58.9 990 89 0.87 1.3 6 1.8 4 17 33.4 1470 86 0.9 1.4 7 1.8
12 24 63.7 490 88 0.65 1.2 4 1.8 8 14 34.3 740 86 0.71 1.6 6.5 1.8
MD280M
6 37 72.6 990 89 0.87 1.3 6 1.8 MD225S 6 18.5 39.9 980 87 0.81 1.5 7 1.8
6 0.75 2.6 950 67 0.65 1.3 5.5 1.8 4 24 46.6 1480 87 0.9 1.4 7 1.8
MD100L 4 1.3 3.7 1440 72 0.75 1.3 6 1.8 8 17 42.4 740 87 0.7 1.6 6.5 1.8
2 1.8 4.5 2900 71 0.85 1.3 7 1.8 MD225M 6 22 43.2 980 87 0.85 1.5 7 1.8
6 1.1 3.5 960 73 0.65 1.3 5.5 1.8 4 28 34.3 1480 87 0.9 1.4 7 1.8
MD112M 4 2 5.1 1450 73 0.81 1.3 6 1.8 8 24 55.3 740 88 0.75 1.2 6.5 1.8
2 2.4 5.8 2920 74 0.85 1.3 7 1.8 MD250M 6 26 52.8 990 88 0.85 1.5 7 1.8
6 1.8 5.1 970 75 0.71 1.3 5.5 1.8 4 34 63.1 1480 89 0.92 1.4 7 1.8
MD132S 4 2.6 6.1 1460 76 0.83 1.3 6 1.8 8 30 68.1 740 89 0.75 1.2 6.5 1.8
2 3 7.4 2910 71 0.87 1.3 7 1.8 MD280S 6 34 67.5 990 89 0.86 1.5 7 1.8
6 2.2 6 970 77 0.72 1.3 5.5 1.8 4 42 77.9 1480 89 0.92 1.4 7 1.8
MD132MA 4 3.3 7.5 1460 80 0.84 1.3 6 1.8 8 34 77.4 740 89 0.75 1.2 6.5 1.8
2 4 8.8 2910 76 0.91 1.3 7 1.8 MD280M 6 37 73.4 990 89 0.86 1.5 7 1.8
6 2.6 6.9 970 80 0.72 1.3 5.5 1.8 4 50 91.8 1480 90 0.92 1.4 7 1.8
MD132MB 4 4 9 1460 80 0.84 1.3 6 1.8 12 3.3 13 480 72 0.55 1.3 5 1.8
2 5 10.8 2910 77 0.91 1.3 7 1.8 MD180L 8 5 16 740 79 0.62 1.3 6 1.8
6 3.7 9.5 980 82 0.72 1.3 5.5 1.8 6 6.5 14 970 82 0.88 1.3 6 1.8
MD160M 4 5 11.2 1470 81 0.84 1.3 6 1.8 4 9 19 1470 83 0.89 1.3 7 1.8
2 6 13.2 2930 76 0.91 1.3 7 1.8 12 4.5 17 490 73 0.56 1.3 5 1.8
6 4.5 11.4 980 83 0.72 1.3 5.5 1.8 8 7 20 740 81 0.67 1.3 6 1.8
MD200LA
MD160L 4 7 15.1 1470 83 0.85 1.3 6 1.8 6 8 17 980 83 0.88 1.3 6 1.8
2 9 18.8 2930 77 0.91 1.3 7 1.8 4 11 23 1480 84 0.88 1.3 7 1.8
8 0.65 2.7 700 59 0.63 1.3 4.5 1.8 12 5.5 20 490 74 0.56 1.3 5 1.8
MD112M 4 2 5.1 1450 73 0.81 1.3 6 1.8 8 8 22 740 81 0.67 1.3 6 1.8
MD200LB
2 2.4 5.8 2920 74 0.85 1.3 7 1.8 6 10 21 980 83 0.88 1.3 6 1.8
8 1 3.6 720 69 0.61 1.3 4.5 1.8 4 13 27 1480 84 0.88 1.3 7 1.8
MD132S 4 2.6 6.1 1460 78 0.83 1.3 6 1.8 12 7 21 490 81 0.63 1.3 5 1.8
2 3 7.1 2910 74 0.87 1.3 7 1.8 8 11 27.6 740 85 0.72 1.3 6 1.8
MD225M
8 1.3 4.6 720 71 0.61 1.3 4.5 1.8 6 13 26 980 85 0.88 1.3 6 1.8
MD132M 4 3.7 8.4 1460 80 0.84 1.3 6 1.8 4 20 39 1480 86 0.9 1.3 7 1.8
2 4.5 10 2910 75 0.91 1.3 7 1.8 12 9 26 490 82 0.63 1.3 5 1.8
8 2.2 7.6 720 75 0.59 1.3 4.5 1.8 8 14 34 740 85 0.73 1.3 6 1.8
MD250M
MD160M 4 5 11.2 1440 81 0.84 1.3 6 1.8 6 16 33 990 85 0.88 1.3 6 1.8
2 6 13.2 2910 75 0.91 1.3 7 1.8 4 26 49 1480 87 0.92 1.3 7 1.8
8 2.8 9.2 720 77 0.6 1.3 4.5 1.8 12 11 32 490 83 0.63 1.3 5 1.8
MD160L 4 7 15.1 1440 83 0.85 1.3 6 1.8 8 18.5 43 740 87 0.75 1.3 6 1.8
MD280S
2 9 18.8 2910 79 0.92 1.3 7 1.8 6 20 41 990 85 0.88 1.3 6 1.8
8 0.85 3.7 710 62 0.56 1.3 5.5 1.8 4 34 65 1490 87 0.92 1.3 7 1.8
MD112M 4 1 3.1 950 67 0.74 1.3 6 1.8 12 13 37 490 84 0.63 1.3 5 1.8
2 1.5 3.5 1440 75 0.86 1.4 7 1.8 8 22 51 740 87 0.75 1.3 6 1.8
MD280M
8 1.1 4.1 730 67 0.6 1.3 5.5 1.8 6 24 49 990 85 0.88 1.3 6 1.8
MD132S 6 1.5 4.2 970 74 0.74 1.3 6 1.8 4 40 75 1490 88 0.92 1.3 7 1.8
4 1.8 4 1460 78 0.87 1.4 7 1.8 / / / / / / / / / /

- A21 -
 YEJ2 BRAKE MOTOR ( DC )
YEJ2 can make action promptly when the power of electric motor is off. Quick brake time doesn’t exceed 0.15 second for frame sizes 63MM up to 90MM
and not exceed 0.2 second for frame sizes 100MM up to 160MM. YEJ2 series are widely used in machine tools, packaging machinery, woodworker
machinery, foof processing machinery, chemical engineering machinery, textile machinery, construction machinery, gear reducer and so on.

Output Speed Current Eff Power Static No-load Energizing Weight

TYPE Factor Braking Brake Lag power Ist/In Tst/TN Tmax/TN
Kw rpm A % cos ¦Õ torque(N.m) time (s) (w) kg
380V/50Hz 2Pole 3000RPM
YEJ2-631-2 0.18 2720 0.53 65 0.8 4 0.2 18 5.5 2.2 2.2 12
YEJ2-631-2 0.25 2720 0.69 68 0.81 4 0.2 18 5.5 2.2 2.2 13
YEJ2-711-2 0.37 2740 0.99 70 0.81 4 0.2 18 6.1 2.2 2.2 14
YEJ2-712-2 0.55 2740 1.4 73 0.82 4 0.2 18 6.1 2.2 2.3 15
YEJ2-801-2 0.75 2845 1.83 75 0.83 7.5 0.2 30 6.1 2.2 2.3 17
YEJ2-802-2 1.1 2840 2.58 77 0.84 7.5 0.2 30 7.0 2.2 2.3 18
YEJ2-90S-2 1.5 2840 3.43 79 0.84 15 0.2 50 7.0 2.2 2.3 23
YEJ2-90L-2 2.2 2840 4.85 81 0.85 15 0.2 50 7.0 2.2 2.3 26
YEJ2-100L-2 3.0 2860 6.31 83 0.87 30 0.2 65 7.5 2.2 2.3 37
YEJ2-112M-2 4.0 2880 8.1 85 0.88 40 0.25 90 7.5 2.2 2.3 45
YEJ2-132S1-2 5.5 2900 11.0 86 0.88 75 0.25 90 7.5 2.2 2.3 69
YEJ2-132S2-2 7.5 2900 14.9 87 0.88 75 0.25 90 7.5 2.2 2.3 72
YEJ2-160M1-2 11 2930 21.3 88 0.89 150 0.35 150 7.5 2.2 2.3 120
YEJ2-160M2-2 15 2930 28.8 89 0.89 150 0.35 150 7.5 2.2 2.3 130
YEJ2-160L-2 18.5 2930 34.7 90 0.90 150 0.35 150 7.5 2.2 2.3 149
380V/50Hz 4Pole 1500RPM
YEJ2-631-4 0.12 1310 0.44 57 0.72 4 0.2 18 4.4 2.1 2.2 13
YEJ2-632-4 0.18 1310 0.62 60 0.73 4 0.2 18 4.4 2.1 2.2 14
YEJ2-711-4 0.25 1330 0.79 65 0.74 4 0.2 18 5.2 2.1 2.2 15
YEJ2-712-4 0.37 1330 1.12 67 0.75 4 0.2 18 5.2 2.1 2.2 16
YEJ2-801-4 0.55 1390 1.57 71 0.75 7.5 0.2 30 5.2 2.4 2.3 17
YEJ2-802-4 0.75 1390 2.03 73 0.76 7.5 0.2 30 6.0 2.3 2.3 18
YEJ2-90S-4 1.1 1380 2.89 75 0.77 15 0.2 50 6.0 2.3 2.3 22
YEJ2-90L-4 1.5 1390 3.07 78 0.79 15 0.2 50 6.0 2.3 2.3 27
YEJ2-100L-4 2.2 1390 5.16 80 0.81 30 0.2 65 7.0 2.3 2.3 34
YEJ2-100L2-4 3 1410 6.78 82 0.82 30 0.2 65 7.0 2.3 2.3 38
YEJ2-112M-4 4 1410 8.80 84 0.82 40 0.25 90 7.0 2.3 2.3 48
YEJ2-132S-4 5.5 1435 11.7 85 0.83 75 0.25 90 7.0 2.3 2.3 71
YEJ2-132M-4 7.5 1440 15.6 87 0.84 75 0.25 150 7.0 2.3 2.3 83
YEJ2-160M-4 11 1440 22.3 88 0.84 150 0.35 150 7.0 2.2 2.3 128
YEJ2-160L-4 15 1460 30.1 89 0.85 150 0.35 150 7.0 2.2 2.3 142
380V/50Hz 6Pole 1000RPM
YEJ2-711-6 0.18 850 0.74 56 0.66 4 0.2 18 4.0 1.9 2.0 9.5
YEJ2-712-6 0.25 850 0.95 59 0.68 4 0.2 18 4.0 1.9 2.0 11
YEJ2-801-6 0.37 885 1.3 62 0.70 7.5 0.2 30 4.7 1.9 2.0 17
YEJ2-802-6 0.55 885 1.79 65 0.72 7.5 0.2 30 4.7 1.9 2.1 19
YEJ2-90S-6 0.75 910 2.29 69 0.72 15 0.2 50 5.5 2.0 2.1 22
YEJ2-90L-6 1.1 910 3.18 72 0.73 15 0.2 50 5.5 2.0 2.1 26
YEJ2-100L-6 1.5 920 3.94 76 0.75 30 0.2 65 6.5 2.0 2.1 34
YEJ2-112M-6 2.2 935 5.60 79 0.76 40 0.25 90 6.5 2.0 2.1 42
YEJ2-132S-6 3.0 960 7.40 81 0.76 75 0.25 90 6.5 2.1 2.1 68
YEJ2-132M1-6 4.0 960 9.80 82 0.76 75 0.25 90 6.5 2.1 2.1 79
YEJ2-132M2-6 5.5 960 12.9 84 0.77 75 0.25 90 6.5 2.1 2.1 87
YEJ2-160M-6 7.5 970 17.0 86 0.77 150 0.35 150 6.5 2.0 2.1 122
YEJ2-160L-6 11 970 24.2 87 0.78 150 0.35 150 6.5 2.0 2.1 141
380V/50Hz 8Pole 750RPM
YEJ2-801-8 0.18 645 0.88 51 0.61 7.5 0.2 30 3.3 1.8 1.9 17
YEJ2-802-8 0.25 645 1.15 54 0.61 7.5 0.2 50 3.3 1.8 1.9 19
YEJ2-90S-8 0.37 670 1.49 62 0.61 15 0.2 50 4.0 1.8 1.9 23
YEJ2-90L-8 0.55 670 2.18 63 0.61 15 0.2 50 4.0 1.8 2.0 25
YEJ2-100L1-8 0.75 680 2.17 71 0.67 30 0.2 65 4.0 1.8 2.0 33
YEJ2-100L2-8 1.1 680 2.39 73 0.69 30 0.2 65 5.0 1.8 2.0 38
YEJ2-112M-8 1.5 690 4.50 75 0.69 40 0.25 90 5.0 1.8 2.0 50
YEJ2-132S-8 2.2 705 6.00 78 0.71 75 0.25 90 6.0 1.8 2.0 63
YEJ2-132M-8 3.0 705 7.90 79 0.73 75 0.25 90 6.0 1.8 2.0 79
YEJ2-160M1-8 4.0 720 10.3 81 0.73 150 0.35 150 6.0 1.9 2.0 118
YEJ2160M2-8 5.5 720 13.6 83 0.74 150 0.35 150 6.0 2.0 2.0 119
YEJ2-160L-8 7.5 720 17.8 85.5 0.75 150 0.35 150 6.0 2.0 2.0 145

- A22 -
 BM BRAKE MOTOR ( AC )
BM brake motors are asynchronous three-phase totally enclosed fan cooled motors. The motors brake in case of power supply failure
ensuring further to a precise stop and a quick braking action, the security of a sudden intervention in case of an unintentional power supply
failure (f.e. power supply black-out, equipment faiure.)
The braking action is obtained without axial sliding of the shaft and provides equal braking torque in both directions of rotation. BM brake
motors are specially suitable to be used with lifting and translating machines, tooling machinery, automatic and transfer machinery in textile,
ceramic and packing fields and in all situation where precision and quickness in braking are required, or to cut production cycles in fixed
spaces and times.

1. Power range from 0.25KW to 3KW, 4 Kinds frame size from 71 to 100
2. Specialized brake disc, no asbestos, with high friction coefficient and long life time ( abrasion wasting <0.15mm by 1300,000 times
on-off)
3. AC current brake, quickly response time
4. Low noise & Vibration

POWER nN IN J x 10-4 A.C.TMAX D.C.TMAX

TYPE COS ¦µ M st /MN M max /MN Zo
(KW) (r/min) (A) (Kg.m2) (N.m) (N.m)

2P n0=3000r/min

BM 71 K 2 0.37 2800 0.96 0.80 2.3 2.3 5.37 13.5 8.5 5700

BM 71 G 2 0.55 2800 1.35 0.82 2.3 2.3 6.05 13.5 8.5 5700

BM 80 K 2 0.75 2800 1.75 0.85 2.2 2.3 12.8 17.5 14 5700

BM 80 G 2 1.1 2800 2.55 0.85 2.2 2.3 14.2 17.5 14 5700

BM 90 S 2 1.5 2800 3.44 0.85 2.2 2.3 20.9 37 29 4280

BM 90 L 2 2.2 2800 4.83 0.86 2.2 2.3 24.15 37 29 4280

BM 100 L 2 3 2800 6.39 0.87 2.2 2.3 43.88 50 41 2650

4P n0=1500r/min
BM 71 K 4 0.25 1400 0.83 0.68 2.4 2.4 7.95 13.5 8.5 19000
BM 71 G 4 0.37 1400 1.12 0.72 2.4 2.4 8.95 13.5 8.5 18050
BM 80 K 4 0.55 1400 1.56 0.73 2.4 2.4 16.48 17.5 14 9500
BM 80 G 4 0.75 1400 2.01 0.75 2.3 2.4 18.91 17.5 14 9500
BM 90 S 4 1.1 1400 2.75 0.78 2.3 2.3 28.77 37 29 14250
BM 90 L 4 1.5 1400 3.65 0.79 2.3 2.3 33.59 37 29 11400
BM 100 L 4 2.2 1400 5.03 0.82 2.2 2.3 56.33 50 41 7600
BM 100 LX 2 3 1400 6.82 0.81 2.2 2.3 66.18 50 41 6650

6P n0=1000r/min
BM 71 K 6 0.18 930 0.74 0.63 2.0 2.0 11.09 13.5 8.5 26000
BM 71 G 6 0.25 930 0.94 0.64 2.0 2.0 12.75 13.5 8.5 26000
BM 80 K 6 0.37 930 1.29 0.64 2.0 2.0 25.84 17.5 14 17000
BM 80 G 6 0.55 930 1.81 0.65 2.0 2.0 29.95 17.5 14 17000
BM 90 S 6 0.75 930 2.19 0.70 2.0 2.2 39.88 37 29 17000
BM 90 L 6 1.1 930 2.98 0.72 2.0 2.2 50.88 37 29 14000
BM 100 L 6 1.5 930 3.90 0.74 2.0 2.2 96.33 50 41 10000

- A23 -
 BM BRAKE MOTOR ( AC )
EXPLODED VIEW FOR SPARE PARTS

1. Front cover 11. Key (Form A) 21. Brake adjuster

2. Wave spring washer 12. Rotor 22. Brake moving element
3. Front bearing 13. Key 23. Spring
4. Blindstop 14. Rear bearing 24. Braking torque adjusting locknut
5. Gasket 15. Tierod 25. Air gap adjusting nut
6. Terminal box cover screw 16. Rear cover 26. Brake coil
7. Terminal box cover 17. Fan 27. Lock nut
8. Terminal board 18. Circlip surface 28. Endcover
9. Cable gland 19. Rear cover (brake surface) 29. Hexagon rear nut
10. Frame 20. Brake disk 30. Brake release

- A24 -
BM BRAKE MOTOR ( AC )
BM71...BM100

B3

TYPE A B C D E F G H I Q U V W Y BB L R Z K d
BM71 112 90 43 14 30 5 11 71 10 336 5 136 108 140 113 147 80 75 8 M5
BM80 125 100 51 19 40 6 15.5 80 10 372 6 154 118 160 125 167 80 75 10 M6
BM90 140 125 56 24 50 8 20 90 12 439 7 180 128 180 155 201 98.5 98.5 10 M8
BM100 160 140 75 28 60 8 24 100 14 498 7 205 145 200 176 237 98.5 98.5 12 M10

B5

TYPE D E F G M N P Q S U W X Y L R Z K d
BM71 14 30 5 11 130 110 160 330 10 5 107 3.5 140 141 80 75 7.5 M5
BM80 19 40 6 15.5 165 130 200 368 12 6 118 3.5 160 163 80 75 9 M6
BM90 24 50 8 20 165 130 200 439 12 7 128 3.5 180 202 98.5 98.5 M8 12
BM100 28 60 8 24 215 180 250 498 15 7 145 4 200 238 98.5 98.5 13 M10

B14

TYPE D E F G M N P Q S U W X Y L R Z d
BM71 14 30 5 11 85 70 105 336 M6 5 107 2.5 140 147 80 75 M5
BM80 19 40 6 15.5 100 80 120 372 M6 6 118 3 160 167 80 75 M6
BM90 24 50 8 20 115 95 138 439 M8 7 128 3 180 202 98.5 98.5 M8
BM100 28 60 8 24 130 110 160 498 M8 7 145 3.5 200 238 98.5 98.5 M10

- A25 -
 MONOPHASE MOTOR ( ALUMINUM HOUSING )

MY
ALUMINUM HOUSING
SERIES SINGLE-PHASE CAPACITOR RUN ASYNCHRONOUS MOTORS

MY Series aluminum housing single-phase capacitor-run asynchronous

motors, with latest design in entirety, are made of selected quality materials
and conform to the IEC standard.
MY motors have good performance, safe and reliable operation, nice
appearance, and can be maintained very conveniently while with low
noises, little vibration and at the same time of light weight and simple
construction. The multiple of starting torque is 0.3-0.7
These series motors are suitable for the occasion where the requirement
of starting torque is low and long-term continuous working, such as
home electric appliance, pumps, fans and recording meters, etc.

IMB3 IMB14 IMB5

OVERALL & INSTALL DIMENSIONS

Mounting Dimensions(mm)
Frame Overall Dimensions(mm)
Size IMB3 IMB14 IMB5
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
63 100 80 40 11 23 4 8.5 63 7 75 60 90 M5 2.5 115 95 140 10 3 130 130 115 185 230
71 112 90 45 14 30 5 11 71 7 85 70 105 M6 2.5 130 110 160 10 3.5 145 145 125 205 225
80 125 100 50 19 40 6 15.5 80 10 100 80 120 M6 3 165 130 200 12 3.5 160 165 135 235 290
90S 140 100 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 335
90L 140 125 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 360

OVERALL & INSTALL DIMENSIONS

TYPE Power Voltage Current Speed Eff Power Tstart/Tn Tmax/Tn Starting A Run Capaction
Kw V A r/min % factor A uf/v
MY631-2 0.18 220 1.48 2800 60 0.92 0.4 1.7 5 8uf/450v
MY632-2 0.25 220 1.96 2800 63 0.92 0.4 1.7 7 12uf/450v
MY711-2 0.37 220 2.73 2800 67 0.92 0.35 1.7 10 16uf/450v
MY712-2 0.55 220 3.88 2800 70 0.92 0.35 1.7 15 20uf/450v
MY801-2 0.75 220 5.15 2800 72 0.92 0.33 1.7 20 25uf/450v
MY802-2 1.1 220 7.02 2800 75 0.95 0.33 1.7 30 30uf/450v
MY90S-2 1.5 220 9.44 2800 76 0.95 0.3 1.7 45 40uf/450v
MY90L-2 2.2 220 13.67 2800 77 0.95 0.3 1.7 65 60uf/450v
MY631-4 0.12 220 1.1 1400 55 0.9 0.4 1.7 3.5 8uf/450v
MY632-4 0.18 220 1.62 1400 56 0.9 0.4 1.7 5 10uf/450v
MY711-4 0.25 220 2.02 1400 61 0.92 0.35 1.7 7 10uf/450v
MY712-4 0.37 220 2.95 1400 62 0.92 0.35 1.7 10 14uf/450v
MY801-4 0.55 220 4.25 1400 64 0.92 0.35 1.7 15 20uf/450v
MY802-4 0.75 220 5.45 1400 68 0.92 0.32 1.7 20 25uf/450v
MY90S-4 1.1 220 7.45 1400 71 0.95 0.32 1.7 30 30uf/450v
MY90L-4 1.5 220 9.83 1400 73 0.95 0.3 1.7 45 40uf/450v

- A26 -
 ( ALUMINUM HOUSING ) MONOPHASE MOTOR

MC
ALUMINUM HOUSING
SERIES SINGLE-PHASE CAPACITOR START ASYNCHRONOUS MOTORS

MC Series aluminum housing single-phase capacitor-start asynchronous

motors, with latest design in entirety, are made of selected quality materials
and conform to the IEC standard.
MC motors have good performance, safe and reliable operation, nice
appearance and can be maintained very conveniently while with low noises,
little vibration and at the same time of light weight and simple construction.
Hugh starting torque, perfect starting performance, generally the multiple of
starting torque can up to more than 2.5 times.
These series motors are suitable for the occasion where big starting torque
and small starting current, such as air-compressors, pumps, refrigerators,
medical apparatus, and many other machines needing full-load start.

IMB3 IMB14 IMB5

OVERALL &INSTALL DIMENSIONS

Mounting Dimensions(mm)
Frame Overall Dimensions(mm)
Size IMB3 IMB14 IMB5
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
71 112 90 45 14 30 5 11 71 7 85 70 105 M6 2.5 130 110 160 10 3.5 145 125 125 205 255
80 125 100 50 19 40 6 15.5 80 10 100 80 120 M6 3 165 130 200 10 3.5 160 165 135 235 295
90S 140 100 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 335
90L 140 125 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 360
100L 160 140 63 28 60 8 24 100 12 - - - - - 215 180 250 15 4 205 215 170 280 380
112M 190 140 70 28 60 8 24 112 12 - - - - - 215 180 250 15 4 245 240 180 310 400

OVERALL &INSTALL DIMENSIONS

TYPE Power Voltage Current Speed Eff Power Tstart/Tn Tmax/Tn Starting A Run Capaction
Kw V A r/min % factor A uf/v
MC711-2 0.18 220 1.89 2800 60 0.72 3 1.8 12 75uf/300v
MC712-2 0.25 220 2.4 2800 64 0.74 3 1.8 15 75uf/300v
MC801-2 0.37 220 3.36 2800 65 0.77 2.8 1.8 21 100uf/300v
MC802-2 0.55 220 4.65 2800 68 0.79 2.8 1.8 29 150uf/300v
MC92S-2 0.75 220 6.09 2800 70 0.8 2.5 1.8 37 200uf/300v
MC90L-2 1.1 220 8.68 2800 72 0.8 2.5 1.8 60 300uf/300v
MC100L1-2 1.5 220 11.38 2900 74 0.81 2.5 1.8 80 400uf/300v
MC100L2-2 2.2 220 16.46 2900 75 0.81 2.2 1.8 120 400uf/300v
MC112M-2 3 220 21.88 1400 76 0.82 2.2 1.8 150 600uf/300v
MC711-4 0.12 220 1.88 1400 50 0.58 3 1.8 9 75uf/300v
MC712-4 0.18 220 2.49 1400 53 0.62 2.8 1.8 12 75uf/300v
MC801-4 0.25 220 3.11 1400 58 0.63 2.8 1.8 15 100uf/300v
MC802-4 0.37 220 4.24 1400 62 0.64 2.5 1.8 21 100uf/300v
MC90S-4 0.55 220 5.49 1400 66 0.69 2.5 1.8 29 100uf/300v
MC90L-4 0.75 220 6.87 1400 68 0.73 2.5 1.8 37 150uf/300v
MC100L1-4 1.1 220 9.52 1400 71 0.74 2.5 1.8 60 200uf/300v
MC100L2-4 1.5 220 12.45 1450 73 0.75 2.5 1.8 80 400uf/300v
MC112M-4 2.2 220 17.78 1450 74 0.76 2.2 1.8 120 600uf/300v

- A27 -
 MONOPHASE MOTOR ( ALUMINUM HOUSING )

ML
ALUMINUM HOUSING
SERIES SINGLE – PHASE DUAL - CAPACITOR ASYNCHRONOUS MOTORS

ML series aluminum housing single-phase dual-capacitor asynchronous

motors, with latest design in entirely ,are made of selected quality materials
and conform to the IEC standard.
ML motors have good performance ,safery and reliable operation, nice
appearance, and can be maintained very conveniently while with low noises,
little vibration and at the compositive performance is good, the multiple of
starting torque is 1.8-2.5
There series motors are suitable for the occasion where the requirements
of big starting torque and high over load, such as air-compressors,pumps,
fans,medical apparatus and instruments, and many other small machines.

IMB3 IMB14 IMB5

OVERALL &INSTALL DIMENSIONS

Mounting Dimensions(mm)
Frame Overall Dimensions(mm)
Size IMB3 IMB14 IMB5
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
71 112 90 45 14 30 5 11 71 7 85 70 105 M6 2.5 130 110 160 10 3.5 145 145 125 210 255
80 25 100 50 19 40 6 15.5 80 10 100 80 120 M6 3.0 165 130 200 12 3.5 160 165 135 240 295
90S 140 100 56 24 50 8 20 90 10 115 95 140 M8 3.0 165 130 200 12 3.5 180 185 145 270 335
90L 140 125 56 24 50 8 20 90 10 115 95 140 M8 3.0 165 130 200 12 3.5 180 185 145 270 360
100L 160 140 63 28 60 8 24 100 12 - - - - - 215 180 250 15 4 205 215 170 280 380

OVERALL &INSTALL DIMENSIONS

Model Power Voltage Current Speed Eff Power Tstart/Tn Tmax/Tn Starting Run Capactior
Kw V A r/min % factor Capactior uf/v uf/v
ML711-2 0.37 220 2.73 2800 67 0.92 2.3 1.8 75uf/300v 12uf/450v
ML712-2 0.55 220 3.88 2800 70 0.92 2.5 1.8 100uf/300v 16uf/450v
ML801-2 0.75 220 5.15 2800 72 0.92 2.5 1.8 100uf/300v 20uf/450v
ML802-2 1.10 220 7.02 2800 75 0.95 2.5 1.8 150uf/300v 25uf/450v
ML90S-2 1.50 220 9.44 2800 76 0.95 2.5 1.8 250uf/300v 40uf/450v
ML90L-2 2.20 220 13.67 2800 77 0.95 2.5 1.8 300uf/300v 60uf/450
ML100L-2 3.00 220 18.2 2800 79 0.95 2.5 1.8 400uf/300v 60uf/450v
ML711-4 0.25 220 1.99 1400 62 0.92 2.5 1.8 50uf/300v 10uf/450v
ML712-4 0.37 220 2.81 1400 65 0.92 2.5 1.8 75uf/300v 10uf/450v
ML801-4 0.55 220 4.0 1400 68 0.92 2.5 1.8 100uf/300v 16uf/450v
ML802-4 0.75 220 5.22 1400 71 0.92 2.5 1.8 100uf/300v 20uf/450v
ML90S-4 1.10 220 7.2 1400 73 0.95 2.5 1.8 150uf/300v 30uf/450v
ML90L-4 1.50 220 9.57 1400 75 0.95 2.5 1.8 200uf/300v 35uf/450v
ML100L1-4 2.20 220 13.9 1400 76 0.95 2.5 1.8 300uf/300v 40uf/450v
ML100L2-4 3.00 220 18.6 1400 77 0.95 2.5 1.8 400uf/300v 60uf/450v

- A28 -