Scribd
Upload
196 views1 page

HL-i Series Digital Compact Scale Calibration Instructions

The document provides calibration instructions for the HL-i series Digital Compact Scale. It instructs the user to warm up the scale for over 5 minutes, calibrate with a weight equivalent to the scale's capacity, and follow a 5-step process to calibrate that involves turning the scale on while pressing two keys, calibrating zero weight, placing the calibration weight on the scale and pressing a key, removing the weight, and checking calibration.

Uploaded by

algama-2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
196 views1 page

HL-i Series Digital Compact Scale Calibration Instructions

The document provides calibration instructions for the HL-i series Digital Compact Scale. It instructs the user to warm up the scale for over 5 minutes, calibrate with a weight equivalent to the scale's capacity, and follow a 5-step process to calibrate that involves turning the scale on while pressing two keys, calibrating zero weight, placing the calibration weight on the scale and pressing a key, removing the weight, and checking calibration.

Uploaded by

algama-2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ENGLISH

HL-i series Digital Compact Scale


Calibration Instructions
Y Warm up the scale for more than 5 minutes. Refer to the instruction
manual for how to disable the automatic power-off function, if necessary.

1. Calibration weight
Calibrate the scale with calibration weights equivalent to capacity.
HL-200i : 200g ± 0.02g
HL-2000i: 2000g ± 0.2g
2. Calibration procedures
(1) Start with the scale turned off. Press the ON:OFF key while pressing
both the RE-ZERO key and UNITS key. Cal will be displayed.
(2) Press the RE-ZERO key to calibrate zero. Cal0 will be displayed.
Make sure there is nothing on the weighing pan. Wait for the stable
indicator to be displayed and press the RE-ZERO key.
Calf will be displayed in a few seconds.
(3) Place the calibration weight on the center of the weighing pan. Wait for
the stable indicator to be displayed and press the RE-ZERO key.
The display will show end .
(4) Remove the calibration weight and the scale will automatically return to
the weighing mode.
(5) Place the calibration weight on the center of the weighing pan again
and check the calibration has been done correctly.
Y If you press the UNITS key at step (2), a 4 digit number will be
displayed. Press the UNITS key again to return to Cal .

End of calibration instructions.

You might also like