Based on Applications (Coated Carbide) Based on Grades

Application
ISO
ISO Range

End Milling / FINEBALL

Parting & Grooving
Range

Holemaking
Threading
Turning
Grade Workpiece Material and Application

Milling
Application Grade P M K P M K

N S H N S H

P20 - P35 ˜ ˜ Medium turning of low carbon steel and alloy steel
TT5100 M20 - M35
TT7005 K01-K15 Medium & low speed machining of stainless steel
Harder
˜

TT7005 K01 - K15 ˜ High speed continuous turning for gray and ductile cast iron
TT7015 K10-K25 TT7015 K10 - K25 ˜ General, continuous and interrupted turning of gray and ductile cast iron
TT8105 P01-P15 TT7025 K20 - K35 ˜ Low speed and interrupted cutting of gray and ductile cast iron
TT7100 P30 - P45 ˜ Interrupted and rough turning of steel
TT7025 K20-K35 TT7400 P10 - P25 ˜ High speed drilling of carbon steel and alloy steel
Turning TT7505 K01-K15 High speed turning & grooving of cast iron
TT8115 P05-P20 ˜

K05 - K25 ˜ High speed milling of gray and ductile cast iron
TT9215 M05-M20 S05-S20 TT7515 P05 - P25 ˜ High speed milling of steel
TT5080 M05-M25 S05-S25 P30 - P45 ˜ Rough milling of carbon & alloy steel
CVD TT7800 M30 - M45 ˜ Medium speed milling of stainless steel
TT8125 P15-P30 Coated TT8105 P01 - P15 ˜ High speed continuous turning of steel
Carbide TT8115 P05 - P20 High speed turning of steel
TT5100 P20-P35 ˜

TT8125 P15 - P30 ˜ General turning of steel

TT9225 M15-M30 S15-S30 TT8135 P25 - P40 ˜ Heavy Interrupted turning of steel. Improved higher toughness and superior fracture resistance
TT9020 P20-M40 M20-M40 M05 - M20 ˜ High speed turning of stainless steel
TT9215 S05 - S20 ˜ High & medium speed machining of heat-resistant alloy
TT9080 M20-M40 S20-S40 M15 - M30 ˜ General turning of stainless steel
TT9225
TT8135 P25-P40 S15 - S30 ˜ Medium speed machining of heat-resistant alloy
M25 - M40 ˜ Low speed and interrupted turning of stainless steel
TT7100 P30-P45 TT9235 S25 - S40 ˜ Low speed machining of heat-resistant alloy
P30-P50 M30-M50 TT9300 P10 - P25 ˜ High speed drilling of carbon & alloy steel
TT8080 P05 - P25 ˜ High speed milling of steel
S30-S50 TT2510 H05 - H25 ˜ High speed milling of hardened steel
TT9235 M25-M40 S25-S40 M05- M25 ˜ High speed finish turning of stainless steel
TT5080 S05 - S25 ˜ High speed turning of heat-resistant alloy
P30-P50 M30-M50 P05 - P25 ˜ High speed milling of steel
TT8020 TT5505
S30-S50 Tougher H05 - H25 ˜ High speed milling of hardened steel
P10 - P30 ˜ High speed milling of steel. Excellent wear and heat resistance
M10 - M30 ˜ General milling of stainless steel
TT2510 P05-P25 H05-H25
Harder TT5515 K10 - K30 ˜ General milling of cast iron
TT7515 P05-P25 K05-K25 S10 - S30 ˜ General milling of heat-resistant alloy
H10 - H30 ˜ High speed milling of hardened steel. Excellent wear resistance
TT6080 K05-K25 H05-H25
P20 - P40 ˜ High speed milling of steel
TT7080 P05-P25 K05-K25 TT5525 M20 - M40 ˜ High speed milling of stainless steel
S20 - S40 ˜ High speed milling of heat-resistant alloy
P20-P40 M20-M40
Milling TT9080 TT6080
K05 - K25 ˜ ˜ ˜ General machining for gray and ductile cast iron
S20-S40 H05 - H25 ˜ ˜ ˜ Finish and medium machining of hardened steel
P05 - P25 ˜ Threading of steel
P20-P40 M20-M40 TT7010 K05 - K25
TT9030 ˜ Threading of cast iron
S20-S40 PVD P05 - P25 ˜ General milling of steel
TT7080 K05 - K25
Coated ˜ Heavy interrupted cutting of cast iron
TT7800 P30-P45 M30-M45
Carbide P25 - P45 ˜ Parting, grooving, turn grooving & drilling of steel
TT7220 M25 - M45
P30-P50 M30-M50 ˜ Parting, grooving, turn grooving & drilling of stainless steel
TT8080 P30 - P50 ˜ For a wide range of threading on low carbon steel & low carbon alloy steel
S30-S50
TT8010 M30 - M50 ˜ For a wide range of threading on stainless steel & exotic materials
P30-P50 M30-M50 S30 - S50 ˜ Toughest grade in threading product line
TT8020
S30-S50 Tougher P30 - P50 ˜ ˜ ˜ ˜ Interrupted and rough machining of steel
TT8020 M30 - M50 ˜ ˜ ˜ ˜ Interrupted and rough machining of stainless steel
S30 - S50 ˜ ˜ ˜ ˜ Low speed and interrupted machining of heat-resistant alloy
TT7505 K01-K15
Harder P30 - P50 ˜ ˜ Interrupted and rough machining of steel
Parting TT8080 M30 - M50 Interrupted and rough machining of stainless steel
TT6080 K05-K25 H05-H25 ˜ ˜
& Grooving S30 - S50 ˜ ˜ Low speed and interrupted machining of heat-resistant alloy
TT5100 P20-P35 M20-M35 P20 - P40 ˜ For small parts turning on steel
TT9020 M20 - M40 ˜ ˜ General machining of stainless steel
P20-P40 M20-M40
TT9080 P20 - P40 ˜ ˜ ˜ ˜ General machining of steel
S20-S40 TT9030 M20 - M40 ˜ ˜ ˜ ˜ General machining of stainless steel
S20 - S40 General machining of heat-resistant alloy
TT7220 P25-P45 M25-M45 ˜ ˜ ˜ ˜
P20 - P40 ˜ ˜ ˜ General machining of steel
P30-P50 M30-M50 TT9080 M20 - M40 ˜ ˜ ˜ ˜ General machining of stainless steel
TT8020
S30-S50 Tougher S20 - S40 ˜ ˜ ˜ ˜ General machining of heat-resistant alloy
Diamond
Coated TTD610 ˜ ˜ Drilling and end milling of composite materials (CFRP and GFRP)
TT6080 K05-K25 H05-H25
Holemaking Harder Carbide
TT9300 P10-P25 K05 - K15 ˜ ˜ ˜ ˜ General machining of cast iron
K10 N05 - N15 ˜ ˜ ˜ ˜ General machining of aluminum alloys and non-ferrous materials
TT7400 P10-P25 S05 - S15 ˜ ˜ ˜ General machining of heat-resistant alloy
P20-P40 M20-M40 Carbide P30 P25 - P35 ˜ ˜ General machining of steel
TT9080 P25 - P35 ˜ General machining of steel
S20-S40
UF10 M25 - M35 ˜ General machining of stainless steel
N25 - N35 ˜ ˜ ˜ General machining of aluminum alloys and non-ferrous materials
P20-P40 M20-M40
TT9030 P05 - P20 ˜ ˜ High speed finish machining of carbon steel, alloy steel, mild steel, mold steel and free-cutting steel
S20-S40
PV3010 M05 - M20 ˜ ˜ High speed finishing of stainless steel
PVD K05 - K20 High speed finishing of cast iron
P30-P50 M30-M50
˜ ˜
TT8020
S30-S50 Tougher Cermet P05 - P20 ˜ ˜ High speed finish machining of carbon steel, alloy steel, mild steel, mold steel and free-cutting steel
PV3030 M05 - M20 ˜ ˜ High speed finish and medium machining of austenite and maltensite stainless steel
K05 - K20 ˜ ˜ High speed finish & medium machining of gray cast iron, nodular and ductile cast iron

Threading
TT7010 P05-P25 K05-K25 Harder P10 - P20 ˜ ˜ Finish machining of carbon steel, alloy steel, mild steel and mold steel. Good surface roughness
CT3000 M10 - M20 ˜ ˜ Finish machining of stainless steel. Good surface roughness
P20-P40 M20-M40 K10 - K20
TT9030 Cermet ˜ ˜ Finish machining of cast iron
S20-S40 P15 - P25 ˜ Finish milling of steel
CT7000 M15 - M25 ˜ Finish milling of stainless steel
P30-P50 M30-M50
TT8010 Coated AB2010 PVD H01 - H10 ˜ High speed turning of hardened steel. Shiny yellow color
S30-S50 Tougher Ceramic SC10 CVD K20 - K30 ˜ Roughing of cast iron with and without coolant
AW120 K01 - K10 ˜ High speed continuous turning of cast iron. Excellent wear resistance
TT5505 P05-P25 H05-H25 AB20 H01 - H10 Turning of high hardness steel and cast iron (HRC 50-65)
Harder
˜
Solid Carbide K05 - K15 ˜ ˜ Continuous to light interrupted turning of cast iron without coolant
TT2510 AB30
End Mill P05-P25 H05-H25 H05 - H15 ˜ ˜ High speed turning of hardened steel (HRC 40-50)
& FINE AS500 K10 - K20 ˜ ˜ Roughing of cast iron with and without coolant. SiAlON grade
P10-P30 M10-M30 Ceramic AS10 K20 - K30 ˜ ˜ ˜ Turning and milling of cast iron
TT5515 K10-K30 S10-S30 AS20 S05 - S20 ˜ ˜ High speed turning and milling of superalloy
H10-H30 TC3020 S10 - S25 ˜ ˜ Turning and milling of superalloy. SiAlON grade
TC3030 S15 - S30 ˜ ˜ Turning and milling of superalloy. SiAlON grade
P20-P40 M20-M40 TC430 S01 - S15 ˜ ˜ ˜ High speed turning and milling of superalloy. Whisker ceramics
TT5525
S20-S40 TB610 H01 - H10 ˜ ˜ Continuous turning of case hardened steel
TB650 General turning of case hardened steel
Tougher
H10 - H20 ˜ ˜
TT9020 M20-M40 TB670 H15 - H25 ˜ ˜ General turning of hardened steel
K15 - K25 ˜ ˜ High speed precision turning of cast iron in continuous cut and interrupted cut
CBN TB730 S05 - S20 Severe interrupted turning of heat-resistant alloy
Notice:
˜ ˜
K15 - K25 ˜ ˜ ˜ High speed machining of cast iron
This is a standardised classification chart designed for user convenience. KB90
In real world conditions performance may vary due to machine,
S05 - S20 ˜ ˜ ˜ Machining of heat-resistant alloy
workpiece, working conditions as well as other environmental factors. It is KB90A K10 - K25 ˜ High speed precision turning of cast iron Solid CBN
recommended to co-ordinate the concerned application with representative TD810 N01 - N10 ˜ ˜ ˜ ˜ Multi modal composition for high speed of non-ferrous materials
TaeguTec technical staff. TD830 N01 - N30 ˜ ˜ ˜ ˜ Machining of non-ferrous materials, ceramic green body, titanium and composite plastics (CFRP and GFRP)
PCD KP500 N05 - N15 ˜ ˜ ˜ ˜ High Si-Al alloy, hardmetal, metal composite & ceramic composite materials
● English version: CT 09/2018 KP300 N10 - N20 ˜ ˜ ˜ ˜ General turning and milling of non-ferrous materials
● ©TaeguTec LTD. KP100 N20 - N30 ˜ ˜ ˜ ˜ Non-ferrous metals. Good surface finishes