MINI BELT GRINDER
MINI PROJECT REPORT
Submitted in partial fulfillment of the
requirement for the award of the degree of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
BY
B.Anil kumar(16K41A0303) G.Ugendhar
redddy(16K41A0311)
Tirumal reddy(16K41A0333 ) sai prasanna(17K45A0329)
Under the guidance of
Mr.B.Rajesh
Asst prof
DEPARTMENT OF MECHANICAL ENGINEERING
July- 2019
CERTIFICATE
This is to certify that the project report entitled “Mini belt grinder”
Being submitted by B.Anilkumar Roll No 16K41A0303, in partial fulfillment for
The award of the degree of bachelor of technology in Mechanical Engineering to
S. R.Engineering College, Warangal is a bonafide work carried out by them
under my guidance and supervision
Project Guide External Examiner Head of the Department
Mr.B.Rajesh Dr.p. sammaiah professor
Asst prof
ORDER OF PAGES
1. ACKNOWLEDGEMENTS
We thank our gratitude to our correspondent B.Rajesh , asst prof.
For his words which inspired us a lot in completing this project work
successfully.
We thank to our principal Dr.v.Mahesh , for his kind valuable suggestion and
advises during various stages of our work.
We express our sincere thanks to Dr.p.sammiah , head of the Mechanical
Engineering section, for his continuous encourangement which led to the
successful completion of the project.
I also thank all our faculty members and my frineds for their kind support and
providing neccessary facilities to carry out the work.
Last but not least we are heavily indebted to our beloved parents for their
continuous source of encouragement.
2.ABSTRACT
The machine we designed and fabricated is used for grinding any shape of
object like circular, rectangular and square etc.., In our project the work
mini belt is used to grinding the material.The mini belt is rotated by the
single phase induction motor.according to the type of material to be grind,
the grinding tool can be changed.
This project gives details of grinding various shapes and sizes of
component.this machine can be widely applied in almost all type of
industries. By varying the pulley sizes I can get a high end speed of over
25000 rpm of motoris needed.the only change I would make is to have a
totally enclosed motor to keep out the grit
3.TABLE OF CONTENTS
CHAPTER 1 : INTRODUCTION
CHAPTER 2 : PROJECT PLANNING
2.1 Taking proper dimensions.
2.2 Diagrams
2.3 Using motor.
2.4 Cost estimation.
CHAPTER 3 : ADVANTAGES AND DISADVANTAGES
3.1 Working principal.
3.2 Applications.
3.3 Advantages and disadvantages.
3.4 Problem identified
CHAPTER 4: FABRICATION
4.1 Conclusion.
4.2 References.
CHAPTER 1: INTRODUCTION
This project is design and fabrication of multi use mini belt grinder .it is
used to grind the machining surfaces to superfinish. It can be used as an
external grinder by fixing the belt grinder attachment on the conveyor
roller.the principle parts of this attachment are main bidy,motor with
pulley,conveyor mini belt etc.
CHAPTER 2: PROJECT PLANNING
1.1 TAKING PROPER DIMENSIONS
1.2 DIAGRAMS
2.3 USING MOTOR
2.4 COST
CHAPTER 3: ADVANTAGES AND DISADVANTAGES
3.1 WORKING PRINCIPLE
3.2 APPLICATIONS
3.3 ADVANTAGES AND DISADVANTAGES
3.4 PROBLEMS IDENTIFIED
CONCLUSIONS
Note : Use 12 font Times New Roman with 1 ½ spacing for the text.
16 font Times New Roman Bold for Chapter headings.
12 font Times New Roman Bold for sub heading in each chapter.
Each batch should submit three additional copies to the department.
