Scribd
Upload
312 views2 pages

Solar Modules for Installers

This document summarizes the specifications of Adani Solar's ETERNAL SERIES 5BB Mono-Crystalline PERC Silicon Solar PV Modules. The key points are: 1) It describes a 355-375 Wp solar module that uses 72 high-efficiency PERC solar cells and has a maximum efficiency of 18.58%. 2) The module has several advantages over traditional modules like higher performance in low and diffuse light, less degradation over time, and excellent reliability. 3) Detailed technical specifications are provided around the module's electrical performance under standard and NOCT conditions, mechanical characteristics, temperature coefficients, and certifications.

Uploaded by

sandeep devabhaktuni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
312 views2 pages

Solar Modules for Installers

This document summarizes the specifications of Adani Solar's ETERNAL SERIES 5BB Mono-Crystalline PERC Silicon Solar PV Modules. The key points are: 1) It describes a 355-375 Wp solar module that uses 72 high-efficiency PERC solar cells and has a maximum efficiency of 18.58%. 2) The module has several advantages over traditional modules like higher performance in low and diffuse light, less degradation over time, and excellent reliability. 3) Detailed technical specifications are provided around the module's electrical performance under standard and NOCT conditions, mechanical characteristics, temperature coefficients, and certifications.

Uploaded by

sandeep devabhaktuni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ETERNAL SERIES

5BB Mono-Crystalline PERC


Silicon Solar PV Modules –
1500V Series

ASM-7-PERC-AAA (AAA=355 - 375) | 72 Cells | 355 - 375 Wp

Highlights

Higher performance at longer wavelengths of light


(1100-1200 nm)

Superior temperature co-efficient and


performance at NOCT, PTC ratings

Excellent performance at low light irradiation (200 W/m2)

LIR treated cells with least LID effect and LeTID effect

5 bus bar cells offering better reliability


against microcracks

Triple EL checking to ensure defect free modules

Reduces installation Reduces transport Reduces land Reduces BOS


costs by 3% costs by 3% costs by 3% costs by 6%

Significant benefit of PERC technology

PERC technology enables better light capturing abilities at longer


wavelength, weak and diffused light and in cloudy conditions.
www.adanisolar.com

Technical Data
Current-Voltage Curve Peak power, (0 ~+ 4.99 Wp)
Pmax (Wp) 355 360 365 370 375

Electrical data – All data measured to STC*


Maximum voltage, Vmpp (V) 38.68 38.85 39.01 39.16 39.34
Maximum current, Impp (A) 9.17 9.25 9.36 9.46 9.55
Open circuit voltage, Voc (V) 46.88 47.07 47.31 47.47 47.67
Short circuit current, Isc (A) 9.85 9.88 9.90 9.96 10.10
Module efficiency (%) 17.59 17.84 18.09 18.34 18.58

Electrical parameters at NOCT


Maximum Power Pmax @ NOCT 266 271 275 279.2 283.4
Maximum voltage, Vmpp (V) 37.62 37.92 38.13 38.36 38.58
Dimensions in mm Maximum current, Impp (A) 7.07 7.14 7.21 7.28 7.35
Open circuit voltage, Voc (V) 46.3 46.6 46.87 47.09 47.31
Short circuit current, Isc (A) 7.48 7.56 7.61 7.68 7.75
*STC: Irradiance 1000 W/m², cell temperature 25°C, air mass AM1.5 according to EN 60904-3.
Average efficiency reduction of 4.5% at 200 W/m² according to EN 60904-1. Except Pmpp,
all other parameters have a tolerance of +/-3%, measurement uncertainty <3%
*NOCT irradiance 800 W/m2, ambient temperature 20°C, wind speed 1 m/sec

Temperature co-efficients (TC) and permissible


operating conditions
TC of open circuit voltage (β) -0.29% /°C
TC of short circuit current (α) 0.048% /°C
TC of power ( ) -0.39% /°C
Maximum system voltage 1500 V (IEC & UL)
NOCT 45°C ± 2°C
Temperature range -40°C to + 85°C

Mechanical data
Length 1998 mm
Width 1010 mm
Height 35 mm/40 mm
Weight 22.7 Kg (35 mm) / 23 Kg (40mm)
Junction box IP68
Cable and connectors 1200 mm length cable, MC4 & Amphenol
compatible connectors
Application class Class A (Safety class II)
Superstrate High transmittance arc glass
Warranty and certifications Cells 72 mono-crystalline PERC solar cells; 5 bus bars
Product warranty**
12 years of product warranty Encapsulation Low shrinkage PID resistant EVA
Substrate Tri layer backsheet
Performance guarantee**
Power degradation <- 3% in first year <- 0.68% / Frame Anodized aluminium frame with twin wall profile
year in 2-25 years
Mechanical load test as per IEC & UL 5400 Pa-front; 2400 Pa-back
Approvals and certificates: IEC 61215 Ed2, IEC Maximum series fuse rating 15 A
61730, IEC 61701, UL 1703, MCS, JET, CEC, CEC-Aus,
IEC 62716, IEC 62759, IEC 62804, IEC 62782, IEC
MSPVL/MDL/PDM/Spec/27/Rev 01

60068-2-68, IEC 61853

Note:
• The specifications included in this datasheet are subject to change without notice.
• The electrical data given here is for reference purpose only.
• Please confirm your exact requirements with the sales representative while placing
your order. All models sold will be as per MSPVL QAP.
*Caution:
Please read safety and installation instructions ** Warranty:
before using the product. Please read Adani solar warranty documents thoroughly.

You might also like