1.
AXES AT CE
2. ADD ALL PIP
3. REM ALL PIP
4. MOVE U THROU IDP@
5. MOVE E THROU IDP@
6. MOVE W THROU IDP@
7. MOVE N THROU IDP@
8. MOVE S THROU IDP@
9. Q DTXR (To See Name Of Component)
10. Q STEXT
11. STEXT ‘NOTE’ (Naming For Attachment)
12. Q ATT (To see the attributes)
13. REPR INSU ON/OFF UPDATE
14. Q ISPEC (To see the insulation)
15. ISPEC NULREF (To Remove the Insulation)
16. CONN NEXT (Connection to next element)
17. FCONN (For force connection)
18. DIST 500
19. AXES AT PH (To see Axes of Pipe Head)
20. AXES AT PT (To see Axes of Pipe Tail)
21. AXES OFF
22. BY U 500
23. BY D 500
24. BY E 500
25. BY W 500
26. BY S 500
27. BY N 500
28. Q NAME
29. ROTATE BY 45 (Rotated command)
30. ROT BY 90 ABOUT Z THRO ID@ (Rotated)
31. Q PARA (To check nozzle size)
32. Q CATREF (To See nozzle Rating)
33. Q POS IN WORLD
34. CH CE (check current element)
35. Q SPREF (check piping Spec)
36. Q ORI (To see the orientation)
37. DIR D (Direction Down) U E W N S (For elbow, tee, valve)
38. Q P1/P2/P3 (To see pipe Bore Direction Connection type and Position)
39. Q HBORE
40. Q TBORE
41. Q LBORE
42. NEW BRA COPY PREV BY E/W/S/N/U/D 100
43. Q U (To see the elevation)
44. Q ANGLE (For change the angle)
45. THRO NEXT (To connect element to next component)
46. Q LTLE (To cheek pipe length)
47. Q MEM
48. Q RTEX OF DETREF (To see element type and detail)
49. CONN IDP@ TO IDP Q CE
50. Q PL (For Direction and position)
51. BRA CONN PH TO FIST MEM
52. BRA CONN PT TO NOZZ ID@
53. BRA CONN PT TO LAST
54. RAD 500 (Control Valve Radius)
55. HEI 500 (Control Valve Height)
56. BACK (Backward)
57. FORW (Forward)
58. For Drain pipe
a. ADD ATT (For isometric note)
b. Q ATT
c. TCONN OPEN
d. Q STEXT
e. STEXT ‘DRAIN POINT’
59. For Slope Line /Rotated Elbow
a. FORWARDS (Select in piping components)
b. DIR TOW NEXT
c. BACKWARDS (Select in piping components)
d. DIR TOW NEXT
60. MTOC DOTD (Do not want in bill of material) You can see the Doted DOTD
61. MTOC ON (Want in bill of material)
62. MTOC OFF (Don’t Want in bill of material)
63. Q PA BOP/TOP (To see the pipe BOP/TOP)
64. Q LSTUBE (To Change the spec Brake)
65. Q PSPEC (To see the pipe spec)
66. CONN PH TO P3 OF ID@ ( AND SELECT THE PIPE P3)
67. CONN PT TO LAS MEM
STRUCTURE COMMANDS.
1. AXES AT POSE/S (end or start)
2. Q POSE WRT/*
3. EXTE END BY D 500 WRT/*
4. EXTE START BY U 500 WRT/*
5. EXTE END/START THRO ID@
6. EXTE END/START THRO IDPL@ (PL-Pline)
7. Q CUTL (To see length of section)
8. Q POS PPLINE BOS IN/* (BOS TOS NA)
9. ADD ALL STR
10. REM ALL STR
11. Q ATT
12. BY U//D/E/W/N/S 500
13. Q DRNS DRNE
14. DRNSTART S 45 E (Direction and angle)
15. DRNEND S 45 W (Direction and angle)
EQUIPMENT COMMANDS.
1. REM ALL EQUI
2. ADD ALL EQUI
3. MOVE U THROU IDP@
4. MOVE E THROU IDP@
5. MOVE W THROU IDP@
6. MOVE N THROU IDP@
7. MOVE S THROU IDP@
8. REPR HOLES ON/OFF UPDATE
9. REPR OBST ON/OFF UPDATE
10. To Include Equipment in another zone
a. VAR1 NAME
b. INCLU $V1
10. BY U//D/E/W/N/S 500
11. NEW BOX COPY PRE
12. NEW BOX XLEN 400 YLEN 250 ZLN 150
13. NEW CYL COPY PRE
14. NEW PYRE COPY PRE
15. NEW NOZZ COPY PRE
16. NEW BOX COPY PRE ROT BY 90 ABOUT Z THRO IDP@
OTHERS COMMANDS
1. For copy equip/sub equipment from one project to another project.
a. FILE /FILE NAME.TXT
b. OUTPUT CE
c. TERM
2. For pest equipment / sub equipment from one project to another project.
a. $M FILE NAME.TXT
4. For Undo Command
a. MDB NOUPDATE
b. EXIT
5. Mdb Update
a. MDB UPDATE
b. USER PROMQAMQA/MQA
c. /SUFN
d. EXIT
6. UNCLAIM CE
7. UNCLAIM ALL
8. ALPHA REQ CLEAR (To clear the command screen)
9. CREATE NEW ZONE/SITE/EQUI
10. ADD ALL WITHIN VOL CE 100
11. Q ORI (To see the orientation)
12. ALPHA LOG /C:/ANANT.TXT (To make command line file)
ALFA LOG END
13. SAVEWORK
14. Q US (User name)
15. Q MDB (Multiple data base)
16. Q REF
17. RECREATE DISPLAY /ABC.TXT (For save Display)
18. $M ABC.TXT (For restore Display)
19. Q UNITS
20. Q DISPLAY
21. Q BANNER (To Check the version number)
22. Q BANNER FULL
23. Q TEAM (PDMS user name)
24. Q USER (Logging name)
25. Q DBNAME (To check DB name)
26. Q DBTYPE
27. Q DBFNUMBER
28. Q DBFILE
29. Q LASTMOD
30. Q SESSMOD
31. Q SESSMODI
32. Q USERMODI
33. Q LASTMODI HIER
34. Q DRAW
35. Q DRAW COUNT
36. Q DRAW FULL
37. STATUS
38. SYSTAT (Gives you information about the current active Status of the project)
39. recre disp /gggg over (U can save as a display or u can do like this) $m gggg
40. FILE /C:/AAA OVER
OUTPUT NEW CEV
TERM ENTER
$M /C:/AAA
