0% found this document useful (0 votes)
354 views1 page

Styrene Monomer Specs & Safety

This document provides the sales specification and typical properties of styrene monomer from Chevron Phillips Chemical Company, including purity levels, limits on impurities, test methods used to evaluate properties, and contact information for technical assistance. Key properties listed are a minimum purity of 99.9% and limits of no more than 0.01% aldehydes and 50 mg/kg peroxides. A safety data sheet number and revision date are also included.

Uploaded by

formoviejune
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
354 views1 page

Styrene Monomer Specs & Safety

This document provides the sales specification and typical properties of styrene monomer from Chevron Phillips Chemical Company, including purity levels, limits on impurities, test methods used to evaluate properties, and contact information for technical assistance. Key properties listed are a minimum purity of 99.9% and limits of no more than 0.01% aldehydes and 50 mg/kg peroxides. A safety data sheet number and revision date are also included.

Uploaded by

formoviejune
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

For more information and technical

assistance contact:

Chevron Phillips Chemical Company LP


P.O. Box 4910
The Woodlands, TX 77387-4910
800.852.5531

Styrene Monomer
Sales Specification
2
Property Units Value Method
Purity, minimum Weight % 99.90 ASTM D5135
Ethylbenzene, maximum Weight % 0.0085 ASTM D5135
Color, maximum Pt-Co Scale 10 ASTM D5386
Polymer Content, maximum mg/kg 10 ASTM D2121
1
Inhibitor (t-Butyl Catechol) mg/kg 10-15 ASTMD4590
Aldhydes (as Benzaldehyde), maximum Weight % 0.01 ASTM D2119
Peroxides (as H2O2), maximum mg/kg 50 ASTM D2340
Benzene, maximum mg/kg 1 ASTM D5135M

Typical Properties
2
Property Units Value Method
Purity Weight % 99.93 ASTM D5135
Ethylbenzene Weight % 0.0045 ASTM D5135
Color Pt-Co Scale 8 ASTM D5386
Polymer Content mg/kg 1 ASTM D2121
1
Inhibitor (t-Butyl Catechol) mg/kg 13 ASTMD4590
Aldhydes (as Benzaldehyde) Weight % 0.002 ASTM D2119
Peroxides (as H2O2) mg/kg 5 ASTM D2340
Benzene mg/kg <1 ASTM D5135M
Chlorides mg/kg <1 ASTM D5808
Sulfur mg/kg <1 ASTM D3961
Flash Point (PMCC) °C 31 ASTM D93

1 Applies to all methods of shipment unless additional inhibitor is specified.


2. Subject to change without notice

MSDS #CPC00089 Revision Date December, 2004

Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and
suitability of the product for the specific use in question and is further advised against relying on the information contained
herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product
is suited and the information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not
make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose,
regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course
of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all
risk and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or
the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well
as federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the
user.

Page 1 of 1

You might also like