Scribd
Upload
135 views1 page

As-Built Drawing Guide for Engineers

The document outlines the requirements for as-built drawings related to paving and drainage, specifying that they must be based on the latest approved design drawings and include detailed information such as grades, elevations, and utility installations. All drawings must be signed and sealed by the Engineer of Record and Professional Land Surveyor, and include relevant contact information. Additionally, it emphasizes the need for clear labeling, proper certification language, and prohibits handwritten information or copies.

Uploaded by

Ashadi1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
135 views1 page

As-Built Drawing Guide for Engineers

The document outlines the requirements for as-built drawings related to paving and drainage, specifying that they must be based on the latest approved design drawings and include detailed information such as grades, elevations, and utility installations. All drawings must be signed and sealed by the Engineer of Record and Professional Land Surveyor, and include relevant contact information. Additionally, it emphasizes the need for clear labeling, proper certification language, and prohibits handwritten information or copies.

Uploaded by

Ashadi1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AS-BUILT DRAWING REQUIREMENTS - PAVING & DRAINAGE

 As-built must be done using latest approved design drawings, identifying applicable scale
 Show final as-built grades, slopes and elevations in a box directly above the design grades, slopes and
elevations for parking lots and roadways
 Drainage as-built and paving as-built to be submitted on separate sheets
 All as-built drawing sheets must be signed, sealed and dated by the Engineer of Record (EOR) and
Professional Land Surveyor (PLS)
 Provide contact information (name, address and telephone number) of EOR, PLS and owner/developer
 All installations shall be shown on the drawings including the buildings, storm drainage, other utilities,
asphalt roadways, concrete, tile pavers, etc.
 Provide address of building and lot/block of each unit
 Provide building finished floor elevation and note elevation datum referenced (NAVD or NGVD)
 Provide north arrow and a location sketch identifying section, township and range
 Provide the name and width of streets and public rights-of-way
 Note “AS-BUILT” in large bold letters on every sheet. This must be part of the CAD file
 Clearly identify right-of-way and property boundary lines
 Provide location and elevation of benchmarks and source
 Change all appropriate language for connections to past tense
 As-built all drainage piping, including size, type and length
 As-built slopes on drainage pipe if only minimums were designed
 As-built all exfiltration trench lengths. Include size, type and length of all solid and perforated/slotted
pipes
 Note removed or grout filled drain lines
 Provide utility crossing information as applicable
 As-built all drainage structures; identifying rim, invert (all) and bottom-of-inside-of-structure elevation
 As-built all control structures; include weir elevation, and any applicable detail sheet
 As-built all headwalls; include invert and top-of-headwall elevation
 As-built roof/yard drain cleanouts if installed; identifying size, type, and rim & invert elevations. Provide
station and offset from drainage between structures. Label baseline used
 As-built all pollution retardant baffle locations
 Provide as-built cross-sections for all lakes, canals, and retention areas
 Note and provide applicable scales, plans profiles/cross sections and details
 Use approved certification language; language must appear on all sheets as part of CAD file
 No hand written information, certification language stamps, stickers or copies will be accepted
 Please contact Kathy Crisci, Plans Processing Technician, at 954-746-3277 or kcrisci@sunrisefl.gov for
submittal requirements
(Please note that final limerock as-built plans are not submitted to the City for review and approval. Please
submit these plans to the EOR for the project. The EOR shall provide a certification letter to the City.)

You might also like