RSR KS PDF
RSR KS PDF
com
RSR-KS
ROTARY AIR BLOWERS
Rotary Air Blowers
Tsurumi's RSR-KS series rotary air blowers are equipped with a 3-lobe spur rotor.
This rotor, as the most important component of a blower, is designed for corrosion resistance,
heat resistance and durability, in addition to low noise, low vibration, ease of maintenance and
high efficiency, thus providing stable performance, and ensuring smooth operation of the
blower over a long period of time.
The product lineup of the RSR-KS series comprises air-cooled types (discharge bore diameter:
50 to 300 mm) and water-cooled types (discharge bore diameter: 80 to 350 mm) as standard
models. Whether used under low pressure (0.6 kg/cm2 or less) or high pressure (0.6 to 0.8
kg/cm2), the appropriate model can be selected according to application.
Use at 0.8 kg/cm2 or higher pressure is available as a special specification. In addition, blowers
can be equipped with a helical rotor (discharge bore diameter: 80 to 250 mm).
The RSR-KS series is suited for various applications, such as for aeration at wastewater
treatment facilities, agitation of wastewater and sewage, decomposition and scum prevention,
and oxygen supply at fish farms.
Tsurumi also offers other water treatment equipment besides blowers, including submersible
pumps, aerators, mixers, scum skimmers, bar screens and dehydrators. These products have
been tested and proven for many years in the field of water treatment, and can be supplied as
a total package.
1 2
Blower with 3-lobe Spur Rotor Installation Diagram Suction Silencer
Rotor
The 3-lobe spur rotor is designed for corrosion
resistance, heat resistance and durability, in Belt Cover
addition to low noise, low vibration and high Motor
efficiency operation.
Discharge Silencer Blower
Casing
Fluid is drawn from the inlet on the upper stage
and discharged from the side on the lower stage.
This structure reduces noise and provides higher
efficiency.
Common Base
Side Cover Expansion Joint
The side cover supports the bearing and is
structured to allow compressed air that has
Standard Accessories Optional Accessories
leaked via the shaft to flow out of the casing,
• Common Base • Pressure Gauge • Gate Valve
without intrusion into other components. With
• Suction Silencer (with Air Filter) • Safety Valve • Anti-vibration Rubber
water-cooled type blowers, cooling water is
• Discharge Silencer • Pulley • Acoustic Hood
supplied to protect the bearing against temperature
• Belt Cover • V-belt • Indoor Use Drip-proof Motor
rise during operation at high pressure.
• Flexi Check or Expansion Joint • Anchor Bolts
4
RSR-KS −Air-Cooled Type−
Performance Curves (for reference)
< RSR2-50KS > < RSR2-65KS > < RSR2-80KS >
Selection Chart (for reference)
rpm rpm rpm
9.0
3.0 4.0
8.0
Suction air volume at standard condition (Qs in m3/min) and required power (La in kW)
Model Speed
(
Discharge Bore
) (rpm) 0.1kg/cm2 (9.8kPa) 0.2kg/cm2 (19.6kPa) 0.3kg/cm2 (29.4kPa) 0.4kg/cm2 (39.2kPa) 0.5kg/cm2 (49.0kPa) 0.6kg/cm2 (58.8kPa) 7.0
RSR2 40
1470 20.56 5.61 19.75 9.31 19.09 13.04 18.58 16.91 18.07 20.78 17.45 24.30
-150KS 19kW 38 45k
1750 24.95 6.71 24.17 11.16 23.52 15.74 23.02 20.53 22.52 25.12 22.01 29.43 1960 W 1470
(150) 25 45kW 36 75k
W
1960
1960 28.65 7.48 27.82 12.47 27.13 17.63 26.61 23.04 26.10 28.27 25.64 33.29 37kW
34 40 55k
55
Air Volume (m3/min)
Air Volume (m3/min)
kW
45
1180 22.27 6.07 21.14 10.06 20.11 14.16 19.39 18.41 18.67 22.59 17.96 26.72 32
kW
15kW 30kW 1750
1750
19
RSR2 1470 28.39 7.67 27.27 12.67 26.36 17.84 25.65 23.32 24.94 28.60 24.33 34.06 30
kW
37
22kW
-150LKS
kW
20 28
1750 34.80 9.17 33.70 15.41 32.80 21.69 32.10 28.38 31.40 34.88 30.70 41.29 1100
30
(150) 30 30k
kW
W
26
1960 39.95 10.22 38.80 17.23 37.84 24.30 37.10 31.85 36.40 39.25 35.76 46.70 11kW 1470 1470
15
24
11
kW
730 21.57 6.02 20.94 10.14 20.29 14.48 19.68 18.83 19.08 22.84 18.48 26.74
kW
15k 19kW
22
22 880
kW
W
RSR2 880 26.52 7.11 25.78 12.22 25.14 17.46 24.43 22.70 23.87 27.53 23.44 32.23 15 22kW
20
-200KS 20
(200) 1100 34.24 8.82 33.40 15.18 32.63 21.98 31.93 28.56 31.24 34.70 30.84 40.98 1180 18 1180 730
1470 47.85 11.71 46.98 20.36 45.87 29.27 44.99 38.12 44.42 46.57 43.84 55.38 12 16 16
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.0 0.1 0.2 0.3 0.4 0.5 0.6
800 36.82 9.75 35.86 16.43 34.81 23.47 33.95 30.51 33.09 37.01 32.23 43.33 Discharge Pressure (kg/cm2) Discharge Pressure (kg/cm2) Discharge Pressure (kg/cm2)
RSR2 960 44.63 11.70 43.47 19.72 42.28 28.17 41.35 36.61 40.43 44.41 39.53 52.00
-250KS
(250) 1150 54.58 13.84 53.29 23.70 52.06 34.23 50.95 44.34 49.54 53.61 48.60 63.01 < RSR2-250KS > < RSR2-300KS >
70 rpm 140 rpm
1350 64.99 15.90 63.61 27.52 62.29 39.74 61.10 51.77 60.02 63.18 59.18 74.98
65 130
800 74.64 20.81 71.85 30.73 69.81 44.04 67.88 57.36 66.26 70.67 64.65 84.15
RSR2 960 91.31 24.37 88.39 36.98 86.23 53.40 84.35 69.87 82.61 86.15 80.78 102.14 60 1350 120 45 1 1350
kW & 50k
-300KS 90
kW
ov W
er
1150 110.48 29.20 107.47 44.52 105.15 64.48 103.07 84.53 101.13 104.43 99.5 124.5
Air Volume (m3/min)
5 6
RSR-WKS −Water-Cooled Type−
Performance Curves (for reference)
< RSR2-80WKS > < RSR2-100WKS > < RSR2-125WKS >
Selection Chart (for reference) 8 rpm 10 rpm 25 rpm
7 9 23
Model Suction air volume at standard condition (Qs in m3/min) and required power (La in kW) Cooling
Speed
(
Discharge Bore
in mm ) (rpm) 0.4 kg/cm2 (39.2 kPa)
Qs La
0.5 kg/cm2 (49.0 kPa)
Qs La
0.6 kg/cm2 (58.8 kPa)
Qs La
0.7 kg/cm2 (68.6 kPa)
Qs La
0.8 kg/cm2 (78.5 kPa)
Qs La
Water
(L/min) 6 8
21
1940
45
15 1940 1940 19 & okW
1150 2.67 3.70 2.39 4.31 2.16 4.89 1.76 6.08 & okvW 18
25 ov
4 800
20 ov
& 00k
&
110
0k er
&
0k er
1150 161.9 127.2 159.4 157.3 157.2 187.1 155.1 216.2 153.5 246.4 ov W
W
W
140 220 er
20
0k
162.6 141.0 269.2
25
159.3 173.4 156.0 205.9 153.2 5k
0k
W 750
100
W
650 186.7 155.5 183.7 191.9 180.4 226.9 177.4 261.7 175.1 298.3 1150 130 205
11
RSR2
0
13
kW
980 25
25
2k
-350WKS 700 206.8 168.8 203.5 207.2 200.5 245.7 198.3 284.7 195.3 322.2 0k
90
W
16
120 190 40 700
(350)
20
W
kW
90
0k
0k
0k
750 226.3 180.0 222.6 220.9 219.7 262.5 217.0 303.9 214.3 344.5 W
W
11
75 un
0
321.3 & 00k
&
239.1
kW
278.2 236.3 980 880 un W 650
80 13 de
• The motor must be selected with 10 to 20% margin from the required power (La in kW). 2k
r
90 un
Note W 35
&
kW de
• The standard condition is defined as a temperature of 20°C, absolute pressure of 101.3kPa, and relative humidity of 70%. 100 160 5k
880 800 W
16
• For blowers with a discharge bore diameter of 80 to 250mm, the 3-lobe spur rotor can be exchanged with a helical rotor (option).
0k
70
W
• In case of operating at 0.9kg/cm2 (88.2kPa), if you need a larger model, contact your dealer or Tsurumi representative. 90 145 580
730
60 80 130
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Discharge Pressure (kg/cm2) Discharge Pressure (kg/cm2) Discharge Pressure (kg/cm2)
7 8
Dimensions
Pumps and Water Treatment Equipment
Tsurumi can supply pumps and water treatment equipment as a total package.
Ød A Approx. G H
(Flange Size)
Ød
Sewage & Wastewater Pump Jet Aerator
L
Motor Output : 0.4-110 kW Motor Output : 0.75-5.5 kW
B
I
ØM
C D J
E K
F
Aerator Mixer
(unit : mm)
TRN series MR series
Air-inlet Bore : 32-150 mm Propeller Dia. : 145-400 mm
Approx. Motor Output : 0.75-40 kW Motor Output : 0.25-4 kW
Model Ød A B C D E F G H I J K L ØM Weight(kg)
RSR2-50KS 50 135 160 450 100 650 680 210 160 120 260 300 290 14 54
RSR2-65KS 65 135 160 450 100 650 680 230 180 145 260 300 290 14 57
RSR2-80KS 80 175 190 550 100 750 775 245 215 125 280 320 380 18 109
RSR2-100KS 100 175 190 600 100 800 825 280 230 120 400 440 380 18 119
RSR2-125KS 125 205 235 650 100 850 900 350 260 120 370 420 434 18 201
Air-
Cooled RSR2-125LKS 125 255 235 750 100 950 1005 360 275 135 430 480 505 18 263
Type
RSR2-150KS 150 255 250 750 100 950 1005 380 300 165 430 480 535 18 293
Floating Scum Skimmer Floating Decanter
RSR2-150LKS 150 255 250 850 125 1100 1155 465 350 210 500 550 535 18 324 FSP series FHP series
Discharge Bore : 50 mm Discharge Bore : 40-80 mm
RSR2-200KS 200 310 300 950 125 1200 1235 505 370 245 500 560 650 23 486
Motor Output : 0.4-0.75 kW Motor Output : 0.25-1.5 kW
RSR2-250KS 250 350 360 1100 200 1500 1565 600 415 325 580 650 770 23 875
RSR2-300KS 300 460 415 1300 250 1800 1875 630 550 365 630 700 1005 23 1160
RSR2-80WKS 80 190 200 600 150 900 920 350 240 135 360 400 430 18 158
RSR2-100WKS 100 190 210 600 150 900 920 375 265 170 400 440 455 18 169
RSR2-125WKS 125 255 255 800 200 1200 1255 430 325 195 440 490 575 18 316
RSR2-150WKS 150 255 255 800 200 1200 1255 530 405 235 440 490 600 18 373
Water-
Cooled RSR2-200WKS 200 355 300 1050 250 1550 1605 590 455 300 640 700 730 23 717
Type Bar Screen Dehydrator
RSR2-200LWKS 200 355 300 1050 250 1550 1605 650 490 330 640 700 730 23 920
RSR2-250WKS 250 470 385 1400 200 1800 1920 800 570 405 730 800 990 23 1351 KW series MDQ/MDC/JD series
Bar Spacing : 1-50 mm Treating Capacity : 3-216 kgDS/h
RSR2-300WKS 300 520 480 1600 200 2000 2065 860 670 390 760 840 1145 23 1704
Motor Output : 0.09 kW Total Motor Output : 0.6-3.15 kW
RSR2-350WKS 350 695 490 2200 200 2600 2730 820 790 450 920 1000 1280 23 3885
* Weight excluding motor and silencer
9 10
www.tsurumi-global.com
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer