SHR 5500

SERIES
Specifications
Heavy-Duty Walkie
Reach Stacker
C SHR 5500
SHR 5500 Series Heavy-Duty Walkie
Reach Stacker

80°
4.13" (105 mm)

4" (102 mm)

32"
36" 8" (815 mm)
(915 mm) (204 mm)

16

4.13" (105 mm)

15

5.5" (140 mm)

(1) ø 10.5" x 4"

(ø 270 mm x 100 mm)

4.13" (105 mm)

(2) ø 4" x 2.88"

(ø 100 mm x 74 mm)

47"
(1195 mm)

3°

13 23.2" 17
(590 mm) 3°
BRAKE

BRAKE
OVERRIDE
DRIVE
12

11

BRAKE

3.5"
(90 mm)
5" (127 mm)

2" 3"
21 (2) ø 5" x 2.88" (76 mm)
ø 10'' x 3" (50 mm)
(ø 250 mm x 75 mm) (ø 127 mm x 74 mm)
*See Note
6.76" (172 mm) 14 5.73"
(145 mm) *Note: 4" (100 mm) dia. load wheel option = 1" ( 25 mm)

8/12/14
 SHR 5500 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model SHR 5520-25 and SHR 5520-30 SHR 5540-35

3 Load Capacity lb kg See Chart
4 Load Center in mm 24 600 24 600
5 Power Electric 24 Volts
6 Operator Type Walkie Reach Stacker
7 Tire Type Load / Drive Poly / Poly
8 Wheels (x = driven) Load / Drive 4 / 1x
9 Lift Height in mm See Chart
13 Head Length* in mm 44 1120 50.5 1285
14 Wheelbase in mm 52.7 1340 59.2 1505
15 Turning Radius in mm 59.4 1510 65.9 1675
Dimensions

16 Inside Straddle in mm 34 - 50" in 865 - 1270 mm in 34 - 50" in 865 - 1270 mm in

2" increments 50 mm increments 2" increments 50 mm increments
17 Forks Standard L x W x T in mm
36 x 4 x 1.75 915 x 102 x 44 36 x 4 x 1.75 915 x 102 x 44
Optional Lengths in mm 30, 39, 42, 760, 990, 1060, 30, 39, 42, 760, 990, 1060,
45, 48, 1145, 1220, 45, 48, 1145, 1220,
54, 60 1370, 1525 54, 60 1370, 1525
18 Travel Speeds Empty / Loaded mph km/h 3.7 / 3.4 5.9 / 5.4 3.7 / 3.4 5.9 / 5.4
19 Lift Speeds Empty / Loaded fpm m/s 48.4 / 29.5 .245 / .145 48.4 / 29.5 .245 / .145
Performance

20 Lowering Speeds Empty / Loaded fpm m/s 50 / 50 .250 / .250 50 / 50 .250 / .250
21 Grade Clearance** ** 4" / 5" & 10.5" %
(100 / 130 mm & 265 mm) 9 / 17 9 / 17 8 / 15 8 / 15
22 Battery Min Weight / Max Amp lb kg 510 / 300 230 / 290 975 / 660 445 / 585
Max Battery Size W x L x H in mm 6.62 x 34.37 13.12 x 31.10
x 24.8 168 x 873 x 630 x 24.8 333 x 790 x 630
Cable Lead Length / in mm
20 / B 510 / B 20 / B 510 / B
Connector Position
* Add 2.1" (55 mm) for Sideshift
** Load Wheel Size

Mast Type TL – Limited Free Lift TT – Triple Telescopic

Imperial Metric Imperial Metric Imperial Metric Imperial Metric
9 Lift Height in mm 127.5 3235 150.5 3820 156 3960 192 4875
3 Load Capacity SHR 5520-25 lb kg 2500 1130 2500 1130 2500 1130 na na
Mast and Weight

SHR 5520-30 lb kg 3000 1360 3000 1360 3000 1360 na na

SHR 5540-35 lb kg 3500 1585 3500* 1585* 3500 1585 3500** 1585**
10 Free Lift † with LBR in mm 6 150 6 150 28 710 42 1065
11 Collapsed Height in mm 83.5 2120 95.5 2425 75 1905 89 2260
12 Extended Height † with LBR in mm 175 4445 198 5030 204 5185 240 6100
23 Min ID Straddle Width in mm 34 865 34 865 34 865 42 1065
24 Truck Weight SHR 5520-25 lb kg 3585 1625 3690 1675 4130 1875 na na
without Battery*** SHR 5520-30 lb kg 4100 1860 4205 1910 4650 2110 na na
SHR 5540-35 lb kg 4055 1840 4160 1885 4600 2085 4735 2150

* Up to 127" (3225 mm), 3350 lb (1550 kg) at 150.5" (3820 mm)

** Up to 156" (3960 mm), 2500 lb (1130 kg) at 192" (4875 mm)
*** Add 105 lb (55 kg) for Sideshift
† When equipped with 48" (1200mm) LBR
 SHR 5500 Series Aisle Planning Guide

SHR 5520
Pallet Length in (mm)
Pallet 30 (762) 36 (915) 40 (1016) 42 (1067) 48 (1220)
Width A B A B A B A B A B
36 in 62 78 62 81 62 87 62 89 63 96
915 mm 1575 1980 1575 2060 1575 2210 1575 2260 1600 2450
40 in 65 78 65 81 65 87 65 90 65 97
1016 mm 1650 1980 1650 2060 1650 2210 1650 2285 1650 2465
42 in 66 78 66 81 66 87 66 90 66 97
1067 mm 1680 1980 1680 2060 1680 2210 1680 2285 1680 2465
Pallet
Length 48 in 69 79 69 81 69 88 69 91 70 98
Pallet 1220 mm 1750 2005 1750 2060 1750 2235 1750 2310 1780 2490
Width

SHR 5540
Pallet Length in (mm)

se
Pallet 30 (762) 36 (915) 40 (1016) 42 (1067) 48 (1220)

sl
Ai
Width

g
A B A B A B A B A B

t in
rs A
ec
B te 36 in 66 83 66 86 66 92 66 94 66 102
Right Angle Aisles 915 mm 1675 2110 1675 2185 1675 2340 1675 2390 1675 2590
Inl
ua

40 in 68 83 68 86 68 92 68 95 68 102
Eq

1016 mm 1730 2110 1730 2185 1730 2340 1730 2415 1730 2590
42 in 69 84 69 87 69 93 69 95 69 103
1067 mm 1755 2135 1755 2210 1755 2365 1755 2415 1755 2615
48 in 72 84 72 87 72 93 72 96 73 104
1220 mm 1830 2135 1830 2210 1830 2365 1830 2450 1855 2640

A = Equal Intersecting Aisles

B = Right Angle Aisles

Add 2.5" (65 mm) if sideshift option is used.

Add 6" (150 mm) to 12" (300 mm) to all aisle dimensions for maximum maneuverability.

SHR 5500 Series Technical Information

Capacity 3. Access 1 2 3 display 7. Poly high-capacity drive tire – 4. Sideshift with internal hosing
Model SHR 5520-25: • Eight-character scrolling 10" dia. x 3" wide 4" (100 mm) sideshift each
2500 lb (1130 kg) at display, 5 button access (250 x 75 mm) direction – reduces capacity
24" (600 mm) load center 8. Polyurethane load wheels – 300 lb (140 kg)
• Three selectable
Model SHR 5520-30: performance levels 5" dia. x 2.88" wide 5. Optional fork lengths (30",
3000 lb (1360 kg) at (127 x 74 mm) 39", 42", 45", 48", 54", 60")
• BDI with lift interrrupt (760, 990, 1060, 1145, 1220,
24" (600 mm) load center 9. InfoPoint® System
• Five hour meters 1370, 1525 mm)
Model SHR 5540-35: 10. Steel power unit covers
3500 lb (1585 kg) at • Event codes 6. Freezer Package
11. 32.8" wide x 47" tall load (Continuous -29 °C / -20 °F)
24" (600 mm) load center • Access 1 2 3 backrest (835 x 1195 mm)
Maximum Battery Size diagnostics with real 7. Plexiglass safety shield
time troubleshooting 12. Emergency power disconnect
SHR 5520-25 and SHR 5520-30: 8. 10" dia. x 4" wide drive tire
6.62" wide x 34.37" long x 24.8" • PIN code capability 13. Key switch (250 x 100 mm)
high (168 x 873 x 630 mm) 4. AC traction and steer motors 14. Horn • Soft poly
– up to 300 amp hours, 24 volts 15. SB175 gray battery connector • Siped soft poly
5. Performance enhancing
SHR 5540-35: features 16. Reversing button 9. Polyurethane load wheels
13.12" wide x 31.10" long x 24.8"
• X10® Handle 17. Electric park brake • 4" dia. x 2.88" wide
high (333 x 790 x 630 mm) (tilt and reach standard) 18. Fork tip indicators (100 x 74 mm)
– up to 660 amp hours, 24 volts
• Brake override 19. Battery compartment rollers
(1" [25 mm] under clearance
Standard Equipment
• Electronic power steering below outriggers)
1. 24-volt electrical system Optional Equipment
• Ramp hold and 1. 30 amp on-board charger • 10.5" dia. x 4" wide
2. Crown’s Access 1 2 3® (270 x 100 mm)
Comprehensive speed control (6.62" [168 mm] battery box)
System Control • Power boost 10. InfoLink® Ready
2. Keyless on-off switch
• High-visibility mast 11. SBE 160 battery connector
3. Work Assist® Accessories:
and carriage • Clip pad 12. EE Rating
• Low profile power unit • Hook
• Tool storage tray • Clip pad and hook
6. Wire mesh guard - mast • Pocket
• Fan
 SHR 5500 Series Technical Information

Operator Controls The SHR 5500 Series features ramp Power Steering Warning Device Options
Crown’s robust X10 handle places hold and speed control to improve Electronic power steering is provid- Audible or Visual Alerts
all control buttons in the optimum operation on small inclines or ed by a heavy-duty AC motor that Safety considerations and
position for ease of operation with ramps. The ramp hold feature uses pivots the drive unit when steer tiller dangers associated with
either hand and to minimize hand the motor to prevent truck move- movement is detected. audible travel alarms and
and wrist movements. An ergo- ment when the brake is released
Mast lights include:
nomic forward/reverse thumb and no travel command is present.
High visibility two and three-stage • Multiple alarms and/or lights
wheel allows for precise maneu- The ramp speed control feature
mast design with angled cross brac- can cause confusion.
vering. The control hand grips are insures that actual travel speed
ing and lift cylinders located behind
urethane covered for insulation from matches requested travel speed. • Workers ignore the alarms
nested I-beams provides maximum
cold and vibration with integrated If the truck encounters an obstacle, and/or lights after day-in and
visibility for load positioning and
horn buttons for easy activation. a power boost feature delivers up day-out exposure.
placement. Crown’s staging cush-
The handle contains a safety button to 15 percent more power than nor-
ions coupled with lowering dampers • Operator may transfer the
which reverses the direction of mally available for a full three sec-
ensure smooth operation. responsibility for “looking out”
the truck should the button touch onds to overcome the obstruction.
the operator. Rolled steel outer mast channels to the pedestrians.
Electrical System
and inner I-beams roll on canted, • Annoys operators and
The physical efforts to hold the A heavy-duty 24-volt fused electri-
steel, anti-friction roller bearings for pedestrians.
handle at a comfortable height was cal system utilizes microprocessor
minimal current draw and long life.
minimized to reduce fatigue. controls for maximum energy ef- Other Options Available
Mast and chain rollers are sealed
ficiency, reduced maintenance and Contact factory for additional
A rabbit/turtle switch incorporates and lubricated for life. Telescoping
infinite speed control capability. options.
two levels of programmable travel mast sections nest to reduce truck
performance so operators can Access control modules for travel, length. Heavier mast cross bracing Dimensions and performance data
select the setting that matches lift and steer are sealed from dirt, design increases stiffness. given may vary due to manufac-
their experience level or application dust and moisture for trouble-free turing tolerances. Performance is
Reach Mechanism
requirements. operation. All contactors have been based on an average size vehicle
An exclusive reach mechanism
eliminated except for the main line and is affected by weight, condition
Exclusive brake override feature design provides unmatched visibility
contactor. A 175 amp battery of truck, how it is equipped and
allows slow speed travel with at all rack levels.
connector with disconnect handle the conditions of the operating
the handle near vertical. This
is standard. Serviceability / Durability area. Crown products and specifi-
feature improves maneuverability
The Access display simplifies ser- cations are subject to change
in tight areas. Hydraulic System
vice for technicians by providing without notice.
Performance Heavy-duty hydraulic motor
advanced diagnostics without the
The SHR 5500 Series incorporates (4.8 kw) is transistor controlled and
need for separate handsets. The
the latest generation AC drive sys- matched with a gear type pump
display allows the technician to view
tem enhanced with Access 1 2 3 selected for optimum lift perfor-
event service codes and truck hours
technology. Crown’s Access 1 2 3 mance and low noise. Single-speed
when event occurred, perform sys-
technology continuously monitors lift with programmable acceleration
tem calibrations or functional tests
truck systems and adjusts system - deceleration and programmable
of components, and make neces-
parameters to deliver optimum two-speed lowering enables cus-
sary adjustments. Crown’s InfoPoint
performance and control. The tomization to match operator pref-
System compliments Access 1 2 3
Access Display provides a conve- erence or application requirements.
diagnostics by providing a Quick
nient interface for operators keep- Cylinder rods are hard-plated Reference Guide, on-truck compo-
ing them informed of any changes chrome with polyurethane seals. nent maps and information nuggets
impacting truck performance and Relief valve tuned to capacity pro- to further simplify troubleshooting.
allowing them to choose from three tects all components in the hydrau- All wiring is color coded.
performance profiles when enabled. lic system. Reservoir incorporates
Removable steel power unit doors
Programmable performance set- an in-tank 10 micron return filter for
are hinged for ease of opening
tings enable authorized personnel removing debris from oil.
providing excellent accessibility to
to tune the lift truck to different Drive Unit / Brake the distribution panel and all other
operator skill levels, or to meet Heavy-duty gearbox with helical components. Steel covers provide
specific application requirements. spur input gear for quiet operation. added protection to critical internal
In addition, up to 25 PIN codes can components.
Regenerative motor braking is ac-
be assigned to individual operators
tivated under a downhill condition, Removable steel battery covers and
and matched to one of the pre-
during plugging or when the direc- hinged cover allow easy access to
programmed performance profiles
tional control is returned to neutral. the battery. Battery removal can
if desired.
An electro-magnetic brake, spring be accomplished from either side.
Electronic power steering allows applied and electrically released, is Battery compartment rollers are
the operator to maneuver heavy mounted on top of the drive motor. standard.
loads in tight spaces throughout The electro-magnetic brake serves
The X10 handle incorporates a
the day while minimizing fatigue. as the parking brake and applies
vacuum die cast process using
Smooth travel and lift performance when the control handle position
high-grade aluminum and benefits
combine with excellent controls moves from the operating zone to
from structural webbing for maxi-
provided by the X10 handle to brake zone during truck operation.
mum strength and durability.
increase productivity.
 Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
Fax 419-629-3796
crown.com

­You can count on Crown to build lift trucks Because Crown is continually improving its products,
specifications are subject to change without notice.
designed for safe operation, but that’s
Crown, the Crown logo, the color beige, the Momentum
only part of the safety equation. Crown symbol, Access 1 2 3, InfoPoint, InfoLink and X10 Handle
encourages safe operating practices through are trademarks of Crown Equipment Corporation in the
United States and other countries.
ongoing operator training, safety-focused
Copyright 2008-2019 Crown Equipment Corporation
supervision, maintenance and a safe working SF14906 Rev. 11-19
Printed in U.S.A.
environment. Go to crown.com and view our

safety section to learn more.