Scribd
Upload
283 views2 pages

WAN Configuration

This document provides instructions for configuring the WAN interface of an ADSL and/or Ethernet modem/router. It explains that the "Connect" and "Disconnect" buttons are only enabled when the connect type is set to PPPoE or PPPoA with a manual configuration. The document lists the options available for configuring the WAN port speed mode, default route selection, channel mode, IGMP, IP protocol, PPP settings, WAN IP settings, and IPv6 WAN settings. It also displays the current WAN interfaces table showing the selected WAN port, mode, VPI, VCI, encapsulation, NAPT, IGMP, default route, IP address, remote

Uploaded by

GIL ENGINEER
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
283 views2 pages

WAN Configuration

This document provides instructions for configuring the WAN interface of an ADSL and/or Ethernet modem/router. It explains that the "Connect" and "Disconnect" buttons are only enabled when the connect type is set to PPPoE or PPPoA with a manual configuration. The document lists the options available for configuring the WAN port speed mode, default route selection, channel mode, IGMP, IP protocol, PPP settings, WAN IP settings, and IPv6 WAN settings. It also displays the current WAN interfaces table showing the selected WAN port, mode, VPI, VCI, encapsulation, NAPT, IGMP, default route, IP address, remote

Uploaded by

GIL ENGINEER
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

9/6/2019 DG-BG4300NU

Status Wizard Setup Advanced Service Firewall Maintenance Smart MENU

WAN Configuration
This page is used to configure the parameters for the WAN interface of your ADSL and(or) Ethernet Modem/Router. Note : When
WAN connect type of PPPoE and PPPoA only is "Manual", the "Connect" and "Disconnect" button will be enable.

WAN
WAN Physical Type: ADSL WAN Ethernet WAN (Port-LAN1)
3G/4G

Auto PVC
WAN Port Speed Mode: Auto

ATM

ADSL Default Route Selection: Auto Specified

LAN
Channel Mode: PPPoE Enable NAPT:
Wireless
Enable IGMP:

IP Protocol: Ipv4/Ipv6

PPP Settings:

User Name: admin Password: •••••••••••

Type: Continuous Idle Time (min):

WAN IP Settings:

Type: Fixed IP DHCP

Local IP Address: Remote IP Address:

NetMask:

Default Route: Disable Enable Auto

Unnumbered:

IPv6 WAN Setting:

Address Mode: Slaac

DHCPv6 Mode: Auto

Request DHCPv6 PD:

Connect Disconnect Add Modify Delete Undo Refresh

WAN Interfaces Table:

Selec User Statu


Inf Mode VPI VCI Encap NAPT IGMP DRoute IP Addr Remote IP NetMask Edit
t Name s

255.255.2
WAN1 IPoE - - - On Off Off 172.21.1.79 172.21.0.1 --- up
54.0

Note:
Please click the edit button/icon for more options such as Service name, VLAN ID, MAC clone, MTU etc.

192.168.3.1/index.htm 1/2
9/6/2019 DG-BG4300NU

Technical Support - 1800 209 3444 Email Support - helpdesk@digisol.com

192.168.3.1/index.htm 2/2

You might also like