A. Direction. Write TRUE if the statement is correct and FALSE if it is wrong.
Write your answers on a separate sheet
of paper.
_______ 1. Selecting the best tool for each task requires training in the proper use of the tools, field experience in
their safe use, and following the manufacturer’s guidance and instructions for that specific tool.
_______ 2. When obtaining the tool, all the associated tooling and consumable parts, as recommended by the
manufacturer, must be included.
_______ 3. The safe use of a tool depends on using the tool for the purpose for which it was designed and also for
other purposes where it can be used as substitute where tool is not available.
_______ 4. All tools should be kept in good condition with regular maintenance.
_______ 5. Preparing for a task includes only knowing the task to be done.
_______ 6. Preparing for a task includes also the sequence of tasks to be done.
B. Direction. Select the letter of the correct answer. Write your answers on a separate sheet of paper.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
2. Which tool is used to loosen or tighten cross-head screws?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens
screws?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
4. Which tool is used to strip and cut wires?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
5. Which tool is used to retrieve parts from location that are too small for your hand to fit?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
6. Which tool is used to clean different computer components without scratching or leaving debris?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
7. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
8. Which tool is used to loosen or tighten slotted screws?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
9. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly
found on laptop?
a. Anti-static mat c. Philips head screwdriver
b. Torx screwdriver d. Wire cutter
10. Which tool is used to blow away dust and debris from different computer parts without touching the
components?
a. Anti-static mat c. Compressed air
b. Hex driver d. Wire cutte
LO1 AND LO2 PLAN AND PREPARE FOR TASKS TO BE UNDERTAKEN AND PREPARE HAND TOOLS
PRETEST
A.
1. True
2. True
3. False
4. True
5. False
6. True
B.
1. A - Antistatic mat
2. C – Philips head screwdriver
3. B – Hex driver
4. D – Wire cutter
5. A – Part retriever
6. B – Lint-free cloth
7. C – Cable ties
8. D – Flat head screwdriver
9. B – Torx screwdriver
10. C – Compressed air
