1.
GUNAKAN CONSOLE DARI LAPTOP KE SWITCH, KEMUDIAN REBOOT SWITCH (PLUG OUT POWER
CABLE)
#URGENT: broadcast message:
System going down IMMEDIATELY!
... Rebooting at user request ...
Flushing file system buffers...
Unmounting any remaining filesystems...
reboot: Restarting system
Machine Restart
Please stand by while rebooting the system...
�
Bootloader 2.0.25 loaded
Press <Ctrl+B> for the Boot Menu
2. TEKAN CTRL+B SETELAH MUNCUL PESAN DIATAS. KEMUDIAN AKAN MUNCUL MENU BERIKUT
(IKUTI LANGKAH-LANGKAH BERIKUT) :
Boot Menu:
------------------------------------------------------
B. Boot backup software
------------------------------------------------------
0. Restart
1. Perform one-off boot from alternate source
2. Change the default boot source (for advanced users)
3. Update Bootloader
4. Adjust the console baud rate
5. Special boot options
6. System information
7. Restore Bootloader factory settings
------------------------------------------------------
9. Quit and continue booting
Enter selection ==> 5
Special boot options menu:
0. Return to previous menu
------------------------------------------------------
1. Skip startup script (Use system defaults)
Enter selection ==> 1
Option successfully set. Press 0 then 9 to boot with the default configuration
Or boot the system from an alternate source.
Special boot options menu:
0. Return to previous menu
------------------------------------------------------
1. Skip startup script (Use system defaults)
Enter selection ==> 0
Boot Menu:
------------------------------------------------------
B. Boot backup software
------------------------------------------------------
0. Restart
1. Perform one-off boot from alternate source
2. Change the default boot source (for advanced users)
3. Update Bootloader
4. Adjust the console baud rate
5. Special boot options
6. System information
7. Restore Bootloader factory settings
------------------------------------------------------
9. Quit and continue booting
Enter selection ==> 1
Select device:
0. Return to previous menu
------------------------------------------------------
1. Flash (flash:)
3. TFTP (tftp://)
4. YMODEM (ymodem:)
6. USB (usb:)
Enter selection ==> 1
Reading filesystem...
Listing of usable files (root directory only)
1. flash:x510-5.4.6-0.1.rel
Enter selection (1-1, 0 to cancel) and press enter ==> 1
Warning: System has been forced to boot from a non-standard location
To restore the system to default behaviour, enter the Boot Menu,
Choose option 2, then option 9
Reading flash:x510-5.4.6-0.1.rel...
Verifying release... OK
Booting...
Starting base/first... [ OK ]
Mounting virtual filesystems... [ OK ]
______________ ____
/\ \ / /______\
/ \ \_ __/ /| ______ |
/ \ | | / | ______ |
/ \ \ / / \ ____ /
/______/\____\ \/ /____________/
Allied Telesis Inc.
AlliedWare Plus (TM) v5.4.6
Current release filename: x510-5.4.6-0.1.rel
Built: Fri Mar 18 01:59:51 UTC 2016
Mounting static filesystems... [ OK ]
Checking flash filesystem... [ OK ]
Mounting flash filesystem... [ OK ]
Checking NVS filesystem... [ OK ]
Mounting NVS filesystem... [ OK ]
Starting base/dbus... [ OK ]
Starting base/syslog... [ OK ]
Starting base/loopback... [ OK ]
Starting base/poe_done... [ OK ]
Starting base/sysctl... [ OK ]
Received event mpoefw.done
Starting base/portmapper... [ OK ]
Received event syslog.done
Starting base/reboot-stability... [ OK ]
Checking system reboot stability... [ OK ]
Starting base/cron... [ OK ]
Starting base/apteryx... [ OK ]
Starting base/appmond... [ OK ]
Starting base/clockcheck... [ OK ]
Starting hardware/openhpi... [ OK ]
Starting hardware/timeout... [ OK ]
Starting base/inet... [ OK ]
Starting base/modules... [ OK ]
Received event modules.done
Received event apteryx.done
Starting network/kermond... [ OK ]
Starting hardware/plugman... [ OK ]
Starting base/apteryx-sync... [ OK ]
Received event apteryx-sync.done
Received event board.inserted
Starting hardware/hardware-done... [ OK ]
Received event hardware.done
Starting network/startup... [ OK ]
Starting network/poefw... [ OK ]
Starting base/external-media... [ OK ]
Received event poefw.done
Starting network/stackd... [ OK ]
Starting network/election.timeout... [ OK ]
Received event network.enabled
Initializing HA processes:
almond, atmfd, auth, cntrd, epsr, hostd, hsl
imiproxyd, irdpd, lacp, lldpd, loopprot, mstp, nsm
ospf6d, pdmd, pim6d, pimd, ripd, ripngd, rmon
sflowd, udldd, vrrpd, bgpd, ospfd, imi
Received event network.initialized
Assigning Active Workload to HA processes:
hsl, nsm, lacpd, loopprotd, rmond, sflowd, vrrpd
irdpd, lldpd, mstpd, authd, epsrd, imi, imiproxyd
Received event network.activated
Loading default configuration
...
done!
Received event network.configured
3. SETELAH SELESAI BOOTING, GUNAKAN PASSWORD DEFAULT (manager/friend)
awplus login: manager
Password:
AlliedWare Plus (TM) 5.4.6 03/18/16 01:59:51
awplus>ena
awplus#
4. JIKA DILIHAT DARI PERINTAH BERIKUT, MAKA SWITCH SEMENTARA INI SKIP CURRENT
CONFIGNYA. SEHINGGA KONFIG SWITCH AKAN KOSONG.
awplus#sh boot
Boot configuration
--------------------------------------------------------------------------------
Current software : x510-5.4.6-0.1.rel
Current boot image : flash:/x510-5.4.6-0.1.rel (file exists)
Backup boot image : Not set
Default boot config: flash:/default.cfg
Current boot config: Skipped at user request
Backup boot config: Not set
Autoboot status : disabled
awplus#
awplus#dir flash
838 -rw- Oct 24 2016 05:12:44 default.cfg
4064621 -rwx May 11 2016 07:59:08 #[32mx510-gui_546_03.jar#[0m
23600769 -rwx May 11 2016 07:58:57 #[32mx510-5.4.6-0.1.rel#[0m
5. LANGKAH BERIKUTNYA GANTI PASSWORD DENGAN CARA EDIT FILE default.cfg SEPERTI
COMMAND BERIKUT :
awplus#edit default.cfg
TAMBAHKAN LINE BERIKUT PADA BAGIAN USERNAME (PASSWORD = FRIEND) :
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
(friend)
username manager privilege 15 password 8 $1$8F74LDgX$I4UBcKsl3f2qmEJ54jU5u0
(yasonly12)
username yasin privilege 15 password 8 $1$dwV/qFBn$BPl9QnvR0xUJgjQrOhGZt1
(yasinonly)
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
username bob privilege 15 password 8 $1$bJor1S4D$DZjWRHuAD.7Sn8urauYVW.
username vendor privilege 15 password 8 $1$dV75d8nV$oEaLQkktF3yUqIVQRUL.V/
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
username yasin privilege 15 password 8 $1$dwV/qFBn$BPl9QnvR0xUJgjQrOhGZt1
SETELAH EDIT, UNTUK SAVE DAN EXIT GUNAKAN : CTRL + K + X
File flash:/default.cfg saved
awplus#
6. SETELAH ITU LAKUKAN REBOOT SWITCH NAMUN TIDAK PERLU MELAKUKAN WRITE CONFIG
SEPERTI BERIKUT :
awplus#reload
reboot system? (y/n): y
#URGENT: broadcast message:
System going down IMMEDIATELY!
... Rebooting at user request ...
Flushing file system buffers...reboot: Restarting system
Unmounting any remaining filesystems...
Machine Restart
Please stand by while rebooting the system...
�
Bootloader 2.0.25 loaded
Press <Ctrl+B> for the Boot Menu
Reading filesystem...
Loading flash:x510-5.4.6-0.1.rel...
Verifying release... OK
Booting...
Starting base/first... [ OK ]
Mounting virtual filesystems... [ OK ]
______________ ____
/\ \ / /______\
/ \ \_ __/ /| ______ |
/ \ | | / | ______ |
/ \ \ / / \ ____ /
/______/\____\ \/ /____________/
Allied Telesis Inc.
AlliedWare Plus (TM) v5.4.6
Current release filename: x510-5.4.6-0.1.rel
Built: Fri Mar 18 01:59:51 UTC 2016
Mounting static filesystems... [ OK ]
Checking flash filesystem... [ OK ]
Mounting flash filesystem... [ OK ]
Checking NVS filesystem... [ OK ]
Mounting NVS filesystem... [ OK ]
Starting base/dbus... [ OK ]
Starting base/syslog... [ OK ]
Starting base/loopback... [ OK ]
Starting base/poe_done... [ OK ]
Starting base/sysctl... [ OK ]
Received event mpoefw.done
Starting base/portmapper... [ OK ]
Received event syslog.done
Starting base/reboot-stability... [ OK ]
Checking system reboot stability... [ OK ]
Starting base/cron... [ OK ]
Starting base/apteryx... [ OK ]
Starting base/appmond... [ OK ]
Starting base/clockcheck... [ OK ]
Starting hardware/openhpi... [ OK ]
Starting hardware/timeout... [ OK ]
Starting base/inet... [ OK ]
Starting base/modules... [ OK ]
Received event modules.done
Received event apteryx.done
Starting network/kermond... [ OK ]
Starting hardware/plugman... [ OK ]
Starting base/apteryx-sync... [ OK ]
Received event apteryx-sync.done
Received event board.inserted
Starting hardware/hardware-done... [ OK ]
Received event hardware.done
Starting network/startup... [ OK ]
Starting network/poefw... [ OK ]
Starting base/external-media... [ OK ]
Received event poefw.done
Starting network/stackd... [ OK ]
Starting network/election.timeout... [ OK ]
Received event network.enabled
Initializing HA processes:
almond, atmfd, auth, cntrd, epsr, hostd, hsl
imiproxyd, irdpd, lacp, lldpd, loopprot, mstp, nsm
ospf6d, pdmd, pim6d, pimd, ripd, ripngd, rmon
sflowd, udldd, vrrpd, bgpd, ospfd, imi
Received event network.initialized
Assigning Active Workload to HA processes:
hsl, nsm, lacpd, loopprotd, rmond, sflowd, vrrpd
irdpd, lldpd, mstpd, authd, epsrd, imi, imiproxyd
Received event network.activated
Loading default configuration
...
done!
Received event network.configured
AlliedWare Plus (TM) 5.4.6 03/18/16 01:59:51
awplus>ena
awplus#
