Squirrel Cage 3-Phase Induction Motor

TS21FV SERIES (Standard & High thrust)

Vertical Flange-Mounted
3-Phase / 50Hz, 60Hz / 380V~460V, 3000V, 3300V, 4160V, 6000V, 6600V,
10000V, 11000V
Frame Size N315LL ~ N560LL (IEC / METRIC)
TEFC FIN FRAME CONSTRUCTION

IEC STANDARD
STANDARD SPECIFICATIONS
 Output : 150kW (200HP) ~ 2000kW (2500HP)
 Poles : 4P ~ 10P
 Frame size : 315 ~ 560 (IEC / METRIC)
 Voltage : 380V ~ 460V, 3000V, 3300V, 4160V, 6000V, 6600V,
10000V, 11000V
 Frequency : 50Hz, 60Hz
 Enclosure : Totally Enclosed Fan Cooled (TEFC)
 Mounting : Vertical Flange-Mounted (“P” base)
 Insulation : Class F
 Temperature rise : Class B at S.F. 1.0 / Class F at S.F. 1.15
(By Resistance Method)
 Environment : Ambient Temperature 40℃
 Altitude : 1000 meters (3300 feet) or less
 Thrust capability : Thrust load is not allowed for standard motors.
For high thrust motors, maximum allowable down
thrust is based on 5 years L-10 bearing life.

PREMIUM FEATURES
 Optimized Cast Iron Fin Frame
Optimum fin design ensures efficient heat exchange.

 Reliable Rotor Construction

Compact design and precise balancing provide reliable operation. Improved arrangement of
ventilation path inside rotor greatly increases cooling efficiency.

 Durable Bearing Construction

Proper bearing selection and bearing life calculation ensure lasting operation. Extra high thrust
and long bearing life is available on request.

 Large Size Terminal Box

Large size terminal box made of high-grade cast iron or steel plate provides ample space and
tough enclosure for cable connection.

 V.P.I. Stator Winding

For medium and high voltage motors, stator winding with V.P.I. treatment meets class F
insulation and gives high resistance to corona.
For low voltage motors, stator winding with fine varnish treatment meets class F insulation and
gives high reliability and long life.

 Low Noise Construction

Low noise construction meets or exceeds NEMA MG 1 standard. Low noise is available upon
request.
 LOW VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 380V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1480 N315LL 521 3370 184 100 200 95.0 94.5 93.5 86.0 82.0 75.5 6000
980 N315LL 533 3370 278 100 210 95.0 94.6 93.3 84.0 79.5 72.0 7000
280
735 N355LL 548 3370 371 100 210 94.7 94.2 93.2 82.0 78.0 68.0 6800
590 N355LL 577 3370 462 100 220 94.5 94.0 93.0 78.0 72.5 61.5 7400
1480 N315LL 586 3790 207 100 200 95.0 94.5 93.5 86.0 82.0 75.5 6000
980 N355LL 591 3790 313 110 210 95.3 94.8 93.8 85.0 81.0 74.0 5900
315
735 N355LL 607 3790 417 100 220 95.0 94.5 93.7 83.0 79.0 69.0 6700
590 N400LL 640 3790 520 100 200 94.7 94.3 93.5 79.0 73.5 62.5 7200
1480 N355LL 658 4280 234 100 190 95.3 95.0 93.5 86.0 82.0 75.5 4900
980 N355LL 666 4280 353 100 210 95.3 94.8 93.8 85.0 81.0 74.0 5900
355
735 N355LL 685 4280 470 100 220 94.9 94.5 93.7 83.0 79.0 69.0 6600
590 N400LL 716 4280 586 100 200 94.7 94.3 93.5 79.5 74.0 63.0 7200
1480 N355LL 695 4500 247 100 210 95.3 95.0 93.5 86.0 82.0 75.5 4800
980 N355LL 703 4500 373 100 210 95.3 94.8 93.8 85.0 81.0 74.0 5800
375
740 N400LL 712 4500 494 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6500
590 N400LL 757 4500 619 100 200 94.7 94.3 93.5 79.5 74.0 63.0 7100
1480 N355LL 742 4800 263 100 210 95.3 95.0 93.5 86.0 82.0 75.5 4700
980 N355LL 748 4800 398 100 210 95.6 95.3 93.8 85.0 81.0 74.0 5700
400
740 N400LL 760 4800 526 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6500
590 N400LL 807 4800 660 100 200 94.7 94.3 93.5 79.5 74.0 63.0 7100
1480 N355LL 832 5390 296 100 200 95.5 95.2 93.7 86.0 82.0 75.5 4700
450 985 N355LL 841 5390 445 100 210 95.6 95.3 93.8 85.0 81.0 74.0 5600
740 N400LL 855 5390 592 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6400
1480 N355LL 914 5910 329 110 210 95.5 95.2 93.7 87.0 83.0 77.0 4600
500 985 N400LL 922 5910 494 100 210 95.8 95.5 94.0 86.0 82.0 75.0 5600
740 N400LL 950 5910 658 100 210 95.2 94.5 93.5 84.0 80.0 73.0 6400
1485 N400LL 1010 6530 367 100 210 95.7 95.5 94.5 88.0 84.0 78.0 4600
560
985 N400LL 1033 6530 554 100 210 95.8 95.5 94.0 86.0 82.0 75.0 5600
630 1485 N400LL 1137 7360 413 100 200 95.7 95.5 94.5 88.0 84.0 78.0 4600
Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

1 1
 LOW VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 415V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1480 N315LL 477 3200 184 100 200 95.0 94.5 93.5 86.0 82.0 75.5 6000
980 N315LL 488 3200 278 110 210 95.0 94.6 93.3 84.0 79.5 72.0 7000
280
735 N355LL 502 3200 371 100 210 94.7 94.2 93.2 82.0 78.0 68.0 6800
590 N355LL 535 3200 462 100 220 94.5 94.0 93.0 77.0 71.5 61.0 7400
1480 N315LL 536 3600 207 100 200 95.0 94.5 93.5 86.0 82.0 75.5 6000
980 N355LL 541 3600 313 110 210 95.3 94.8 93.8 85.0 81.0 74.0 5900
315
735 N355LL 556 3600 417 100 210 94.9 94.5 93.7 83.0 79.0 69.0 6700
590 N400LL 590 3600 520 100 200 94.7 94.3 93.5 78.5 73.0 62.0 7200
1480 N355LL 603 4000 234 100 190 95.3 95.0 93.5 86.0 82.0 75.5 4900
980 N355LL 610 4000 353 110 210 95.3 94.8 93.8 85.0 81.0 74.0 5900
355
735 N355LL 627 4000 470 100 210 94.9 94.5 93.7 83.0 79.0 69.0 6600
590 N400LL 664 4000 586 100 200 94.7 94.3 93.5 78.5 73.0 62.0 7200
1480 N355LL 637 4200 247 100 210 95.3 95.0 93.5 86.0 82.0 75.5 4800
980 N355LL 644 4200 373 110 210 95.3 94.8 93.8 85.0 81.0 74.0 5800
375
740 N400LL 652 4200 494 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6500
590 N400LL 697 4200 619 100 200 94.7 94.3 93.5 79.0 73.5 62.5 7100
1480 N355LL 679 4500 263 100 210 95.3 95.0 93.5 86.0 82.0 75.5 4700
980 N355LL 685 4500 398 110 210 95.6 95.3 93.8 85.0 81.0 74.0 5700
400
740 N400LL 696 4500 526 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6500
590 N400LL 739 4500 660 100 200 94.7 94.3 93.5 79.5 74.0 63.0 7100
1480 N355LL 762 5050 296 100 210 95.5 95.2 93.7 86.0 82.0 75.5 4700
450 985 N355LL 770 5050 445 110 210 95.6 95.3 93.8 85.0 81.0 74.0 5600
740 N400LL 783 5050 592 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6400
1480 N355LL 837 5600 329 100 210 95.5 95.2 93.7 87.0 83.0 77.0 4600
500 985 N400LL 844 5600 494 110 210 95.8 95.5 94.0 86.0 82.0 75.0 5600
740 N400LL 870 5600 658 100 210 95.2 94.7 93.7 84.0 80.0 73.0 6400
1485 N400LL 925 6000 367 100 210 95.7 95.5 94.5 88.0 84.0 78.0 4600
560
985 N400LL 946 6000 554 100 210 95.8 95.5 94.0 86.0 82.0 75.0 5600
630 1485 N400LL 1041 6750 413 100 210 95.7 95.5 94.5 88.0 84.0 78.0 4600
Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

2 2
 LOW VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 380V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1770 N315LL 579 3750 173 100 210 95.0 94.5 93.0 87.0 83.0 76.5 5600
1175 N315LL 586 3750 261 100 210 95.0 94.6 92.8 86.0 82.0 74.0 6500
315
885 N355LL 600 3750 347 100 210 94.9 94.5 92.7 84.0 79.5 71.0 6200
710 N355LL 656 3750 432 100 200 94.7 94.3 92.5 77.0 71.5 59.5 6800
1770 N315LL 658 4230 195 100 210 95.3 95.0 93.5 86.0 82.0 75.5 5600
1180 N355LL 662 4230 293 100 210 95.3 94.8 93.3 85.5 81.5 73.5 5400
355
885 N355LL 674 4230 391 100 210 95.2 94.7 93.2 84.0 79.5 71.0 6100
710 N400LL 728 4230 487 100 200 95.0 94.5 93.0 78.0 72.5 60.5 6600
1775 N355LL 691 4480 206 100 210 95.3 95.0 93.5 86.5 82.5 76.0 4400
1180 N355LL 703 4480 310 100 210 95.3 94.8 93.3 85.0 81.0 73.0 5300
375
885 N355LL 712 4480 413 100 210 95.2 94.7 93.2 84.0 79.5 71.0 6000
710 N400LL 769 4480 514 100 200 95.0 94.5 93.0 78.0 72.0 60.5 6600
1775 N355LL 737 4790 219 100 200 95.3 95.0 93.5 86.5 82.5 76.0 4300
1180 N355LL 750 4790 330 100 210 95.3 94.8 93.3 85.0 81.0 73.0 5200
400
885 N355LL 756 4790 440 100 210 95.2 93.7 93.2 84.5 79.5 71.0 6000
710 N400LL 815 4790 549 100 200 95.0 94.5 93.0 78.5 72.5 61.0 6600
1775 N355LL 832 5400 247 100 190 95.5 95.2 93.7 86.0 82.0 75.5 4300
1180 N355LL 841 5400 371 100 210 95.6 95.3 93.8 85.0 81.0 73.0 5200
450
885 N400LL 847 5400 495 100 210 95.5 95.2 93.7 84.5 79.5 71.0 5900
710 N400LL 917 5400 617 100 200 95.0 94.5 93.0 78.5 72.5 60.5 6500
1775 N355LL 925 6000 274 100 190 95.5 95.2 93.7 86.0 82.0 75.5 4200
500 1180 N355LL 935 6000 413 100 210 95.6 95.3 93.8 85.0 81.0 73.0 5100
885 N400LL 941 6000 550 100 210 95.5 95.2 93.7 84.5 79.5 71.0 5900
1775 N355LL 1010 6560 307 100 210 95.7 95.5 94.5 88.0 84.0 78.0 4100
560
1180 N400LL 1021 6560 462 100 210 95.8 95.5 94.0 87.0 83.0 77.0 5200
1780 N400LL 1111 7190 345 90 200 95.7 95.5 94.5 90.0 87.5 80.0 4200
630
1180 N400LL 1148 7190 520 100 210 95.8 95.5 94.0 87.0 83.0 77.0 5100
710 1780 N400LL 1252 8000 389 100 200 95.7 95.5 94.5 90.0 87.5 80.0 4200
Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

3 3
 LOW VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 440V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1770 N315LL 500 3250 173 100 210 95.0 94.5 93.0 87.0 83.0 76.5 5600
1175 N315LL 506 3250 261 100 210 95.0 94.6 92.8 86.0 82.0 74.0 6500
315
885 N355LL 519 3250 347 100 210 94.9 94.5 92.7 84.0 79.5 71.0 6200
710 N355LL 567 3250 432 100 200 94.7 94.3 92.5 77.0 71.0 59.0 6800
1770 N315LL 568 3690 195 100 210 95.3 95.0 93.5 86.0 82.0 75.5 5600
1180 N355LL 572 3690 293 100 210 95.3 94.8 93.3 85.5 81.5 73.5 5400
355
885 N355LL 583 3690 391 100 210 95.2 94.7 93.2 84.0 79.5 71.0 6100
710 N400LL 629 3690 487 100 200 95.0 94.5 93.0 78.0 72.0 60.0 6600
1775 N355LL 597 3880 206 100 210 95.3 95.0 93.5 86.5 82.5 76.0 4400
1180 N355LL 607 3880 310 100 210 95.3 94.8 93.3 85.0 81.0 73.0 5300
375
885 N355LL 615 3880 413 100 210 95.2 94.7 93.2 84.0 79.5 71.0 6000
710 N400LL 664 3880 514 100 200 95.0 94.5 93.0 78.0 72.0 60.0 6600
1775 N355LL 637 4130 219 100 200 95.3 95.0 93.5 86.5 82.5 76.0 4300
1180 N355LL 648 4130 330 100 210 95.3 94.8 93.3 85.0 81.0 73.0 5200
400
885 N355LL 656 4130 440 100 210 95.2 94.8 93.3 84.0 79.5 71.0 6000
710 N400LL 704 4130 549 100 200 95.0 94.5 93.0 78.5 72.5 60.5 6600
1775 N355LL 719 4660 247 90 190 95.5 95.2 93.7 86.0 82.0 75.5 4300
1180 N355LL 727 4660 371 100 210 95.6 95.3 93.8 85.0 81.0 73.0 5200
450
885 N400LL 732 4660 495 100 210 95.5 95.2 93.7 84.5 80.0 71.5 5900
710 N400LL 792 4660 617 100 200 95.0 94.5 93.0 78.5 72.5 60.5 6500
1775 N355LL 799 5190 274 90 190 95.5 95.2 93.7 86.0 82.0 75.5 4200
500 1180 N355LL 807 5190 413 100 210 95.6 95.3 93.8 85.0 81.0 73.0 5100
885 N400LL 813 5190 550 100 210 95.5 95.2 93.7 84.5 80.0 71.5 5900
1775 N355LL 873 5660 307 100 210 95.7 95.5 94.5 88.0 84.0 78.0 4100
560
1180 N400LL 882 5660 462 100 210 95.8 95.5 94.0 87.0 83.0 77.0 5200
1780 N400LL 960 6210 345 90 200 95.7 95.5 94.5 90.0 87.5 80.0 4200
630
1180 N400LL 992 6210 520 90 200 95.8 95.5 94.0 87.0 83.0 77.0 5100
710 1780 N400LL 1082 6960 389 90 200 95.7 95.5 94.5 90.0 87.5 80.0 4200
Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

4 4
 LOW VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 460V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1770 N315LL 478 3150 173 100 210 95.0 94.5 93.0 87.0 83.0 76.5 5600
1175 N315LL 484 3150 261 100 210 95.0 94.6 92.8 86.0 82.0 74.0 6500
315
885 N355LL 496 3150 347 100 210 94.9 94.5 92.7 84.0 79.5 71.0 6200
710 N355LL 542 3150 432 100 200 94.7 94.3 92.5 77.0 71.5 59.5 6800
1770 N315LL 544 3600 195 100 210 95.3 95.0 93.5 86.0 82.0 75.5 5600
1175 N355LL 547 3600 294 100 210 95.3 94.8 93.3 85.5 81.5 73.5 5400
355
885 N355LL 557 3600 391 100 210 95.2 94.7 93.2 84.0 79.5 71.0 6100
710 N400LL 601 3600 487 100 200 95.0 94.5 93.0 78.0 72.0 60.0 6600
1770 N355LL 571 3800 206 100 210 95.3 95.0 93.5 86.5 82.5 76.0 4400
1180 N355LL 581 3800 310 100 210 95.3 94.8 93.3 85.0 81.0 73.0 5300
375
885 N355LL 589 3800 413 100 210 95.2 94.7 93.2 84.0 79.5 71.0 6000
710 N400LL 635 3800 514 100 200 95.0 94.5 93.0 78.0 72.0 60.0 6600
1770 N355LL 609 4150 220 100 200 95.3 95.0 93.5 86.5 82.5 76.0 4300
1180 N355LL 620 4150 330 100 210 95.3 94.8 93.3 85.0 81.0 73.0 5200
400
885 N355LL 624 4150 440 100 210 95.2 94.7 93.2 84.5 80.0 72.0 6000
710 N400LL 670 4150 549 100 200 95.5 94.5 93.0 78.5 72.5 60.5 6600
1775 N355LL 688 4600 247 100 200 95.5 95.2 93.7 86.0 82.0 75.5 4300
1180 N355LL 695 4600 371 100 210 95.6 95.3 93.8 85.0 81.0 73.0 5200
450
885 N400LL 696 4600 495 100 210 95.5 95.2 93.7 85.0 81.0 73.0 5900
710 N400LL 757 4600 617 100 200 95.0 94.5 93.0 78.5 72.5 60.5 6500
1775 N355LL 764 5100 274 100 200 95.5 95.2 93.7 86.0 82.0 75.5 4200
500 1180 N355LL 772 5100 413 100 210 95.6 95.3 93.8 85.0 81.0 73.0 5100
885 N400LL 773 5100 550 100 210 95.5 95.2 93.7 85.0 81.0 73.0 5900
1775 N355LL 835 5700 307 100 210 95.7 95.5 94.5 88.0 84.0 78.0 4100
560
1180 N400LL 843 5700 462 100 210 95.8 95.5 94.0 87.0 83.0 77.0 5200
1780 N400LL 918 6000 345 90 200 95.7 95.5 94.5 90.0 87.5 80.0 4200
630
1180 N400LL 949 6000 520 90 210 95.8 95.5 94.0 87.0 83.0 77.0 5100
710 1780 N400LL 1035 6700 389 90 200 95.7 95.5 94.5 90.0 87.5 80.0 4200
Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

5 5
 MEDIUM VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 3000V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1480 N315LL 36.6 235 98.7 100 200 94.0 93.0 91.0 84.0 81.5 74.5 6100
980 N315LL 38.5 230 149 100 200 93.8 93.3 91.8 80.0 75.0 66.0 7100
150
730 N315LL 40.5 230 200 100 200 93.7 92.7 90.7 76.0 72.5 63.0 7800
585 N355LL 42.3 230 250 100 200 93.5 93.0 91.5 73.0 67.5 56.5 7800
1480 N315LL 45.1 290 122 100 200 94.0 93.0 91.0 84.0 81.5 74.5 6100
980 N315LL 47.4 280 184 100 200 93.8 93.3 91.3 80.0 75.0 66.0 7100
185
735 N355LL 50.0 280 245 100 200 93.7 92.7 90.7 76.0 72.5 63.0 7100
585 N355LL 52.2 280 308 100 200 93.5 93.0 91.5 73.0 67.5 56.5 7700
1480 N315LL 48.7 310 132 100 200 94.0 93.0 91.5 84.0 81.5 74.5 6100
980 N315LL 51.3 310 199 100 200 93.8 92.8 91.3 80.0 75.0 66.0 7000
200
735 N355LL 53.3 310 265 100 200 93.7 93.2 92.2 77.0 73.5 64.0 7000
585 N355LL 56.4 310 333 100 200 93.5 93.0 91.5 73.0 68.0 57.0 7600
1480 N315LL 53.6 340 145 100 200 94.0 93.0 91.5 84.0 81.5 74.5 6000
980 N315LL 54.8 340 219 100 200 94.3 93.8 92.8 82.0 77.0 68.0 7000
220
735 N355LL 57.9 340 292 100 210 93.7 93.2 92.2 78.0 74.5 65.0 6900
585 N355LL 62.0 340 366 100 210 93.5 93.0 91.5 73.0 68.0 57.0 7600
1480 N315LL 60.6 390 165 100 200 94.5 93.5 91.5 84.0 81.5 74.5 6000
980 N355LL 61.9 390 248 100 200 94.8 94.3 92.8 82.0 77.0 68.0 6100
250
735 N355LL 66.0 380 331 100 210 93.5 93.2 92.2 78.0 74.5 65.0 6800
588 N400LL 66.6 380 414 100 200 94.5 94.0 93.0 76.5 71.0 60.5 7300
1480 N355LL 67.1 430 184 100 200 94.5 93.5 91.5 85.0 82.5 75.5 5000
980 N355LL 69.3 430 278 100 190 94.8 94.3 92.8 82.0 77.0 68.0 6000
280
735 N355LL 73.0 420 371 90 210 94.7 94.2 93.2 78.0 74.5 65.0 6800
588 N400LL 74.5 420 464 90 210 94.5 94.0 93.0 76.5 71.0 60.5 7100
1480 N355LL 76.4 490 207 100 190 94.5 94.0 92.5 84.0 81.5 74.5 5000
980 N355LL 78.0 480 313 90 190 94.8 94.3 92.8 82.0 77.0 68.0 5900
315
735 N355LL 82.1 480 417 100 210 94.7 94.2 92.7 78.0 74.5 65.0 6700
588 N400LL 83.9 480 522 100 210 94.5 94.0 92.5 76.5 71.0 60.5 7200
1480 N355LL 84.6 540 234 100 210 94.5 94.0 92.5 85.5 83.0 76.0 4900
980 N355LL 86.8 540 353 100 190 94.8 94.3 93.3 83.0 78.0 69.0 5900
355
735 N400LL 91.9 530 470 100 210 94.7 94.2 93.2 78.5 75.0 65.5 6500
588 N400LL 94.5 530 588 100 210 94.5 94.0 92.5 76.5 71.0 60.5 7200
1480 N355LL 89.3 570 247 100 210 94.5 94.0 92.5 85.5 83.0 76.0 4800
980 N355LL 91.7 570 373 100 190 94.8 94.3 93.3 83.0 78.0 69.0 5800
375
735 N400LL 97.1 560 497 100 210 94.7 94.2 93.2 78.5 75.0 65.0 6500
588 N450LL 98.5 560 621 100 210 94.5 94.0 92.5 77.5 73.0 63.5 7000
1480 N355LL 95.3 610 263 100 210 94.5 94.0 92.5 85.5 83.0 76.0 4900
980 N355LL 97.3 610 398 100 190 95.3 94.8 93.8 83.0 78.0 69.0 5900
400
735 N400LL 102 600 530 100 210 95.2 94.2 93.2 79.0 75.5 66.0 6500
588 N450LL 105 600 663 100 210 95.0 94.0 92.5 77.5 73.0 63.5 7000
1480 N355LL 107 690 296 100 200 94.5 94.0 92.5 85.5 83.0 76.0 4700
980 N400LL 108 680 447 100 210 95.3 94.8 93.3 84.5 80.0 72.5 5700
450
735 N400LL 115 680 596 100 210 95.2 94.7 93.2 79.0 75.5 66.0 6400
590 N450LL 118 680 743 100 210 94.5 94.0 92.5 77.5 73.0 63.5 6900
1480 N355LL 118 760 329 100 190 94.5 94.0 92.5 86.0 83.5 76.5 4600
980 N400LL 119 760 497 100 210 95.3 94.8 93.3 84.5 80.0 72.5 5600
500
740 N450LL 126 750 658 100 210 95.2 94.7 93.2 80.0 76.5 67.0 6200
590 N500LL 129 750 825 100 210 94.5 94.0 93.0 79.0 74.0 66.5 8300
1480 N400LL 131 840 369 100 200 95.5 95.0 93.5 86.0 83.5 76.5 4600
980 N400LL 133 840 557 100 210 95.6 94.8 93.3 84.5 80.0 72.5 5600
560
740 N450LL 142 830 737 100 210 95.2 94.7 93.2 80.0 76.5 67.0 6100
590 N500LL 144 820 924 100 210 95.0 94.5 93.0 79.0 74.0 66.5 8300

6 6
 MEDIUM VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 3000V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1480 N400LL 148 950 415 100 200 95.5 95.0 93.5 86.0 83.5 76.5 4600
985 N450LL 149 950 623 100 210 95.8 95.3 93.8 85.0 81.0 73.5 5300
630
740 N500LL 155 930 829 100 210 95.2 94.7 93.7 82.0 78.5 70.0 7400
590 N500LL 162 930 1040 100 210 95.0 94.5 93.5 79.0 74.0 66.5 8200
1485 N450LL 165 1070 466 100 200 95.5 95.0 94.0 86.5 84.0 77.0 4300
985 N450LL 168 1070 702 100 200 95.8 95.3 93.8 85.0 81.0 73.5 5200
710
740 N500LL 175 1050 935 100 200 95.2 94.7 93.7 82.0 78.5 70.0 7300
590 N500LL 180 1050 1172 100 200 95.3 95.0 94.0 79.5 74.5 66.5 8100
1485 N450LL 175 1130 492 100 200 95.5 95.0 93.5 86.5 84.0 77.0 4200
985 N500LL 176 1130 742 100 200 95.8 95.3 94.3 85.5 81.5 74.0 6300
750
740 N500LL 184 1100 987 100 200 95.2 94.7 93.7 82.5 79.0 70.5 7200
590 N560LL 188 1100 1238 100 200 95.5 95.0 94.0 80.5 77.5 69.5 14100
1485 N450LL 186 1200 525 100 200 95.5 95.0 93.5 86.5 84.0 77.0 4100
985 N500LL 188 1200 791 100 210 95.8 95.3 94.3 85.5 81.5 74.0 6200
800
740 N500LL 195 1170 1053 100 210 95.5 95.2 94.2 82.5 79.0 70.5 7100
590 N560LL 200 1170 1321 100 210 95.5 95.0 94.0 80.5 75.5 67.5 13900
1485 N500LL 207 1340 590 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

985 N500LL 210 1320 890 100 210 95.8 95.3 94.3 86.0 82.0 74.5 6200
900
740 N560LL 217 1320 1185 100 210 95.7 95.2 94.2 83.5 80.0 71.0 12500
590 N560LL 225 1320 1486 100 210 95.5 95.0 94.0 80.5 77.5 69.5 13700
1485 N500LL 230 1480 656 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

985 N500LL 234 1460 989 90 210 95.8 95.3 94.3 86.0 82.0 74.5 6100
1000
740 N560LL 241 1450 1316 90 210 95.7 95.2 94.2 83.5 80.0 71.0 12400
590 N560LL 250 1450 1651 90 210 95.5 95.0 94.0 80.5 77.5 69.5 13500
1485 N500LL 257 1650 735 90 200 96.0 95.5 94.5 87.5 86.5 82.0 (4)

985 N560LL 259 1630 1107 90 200 95.8 95.3 95.0 87.0 83.0 75.5 10700
1120
740 N560LL 270 1620 1474 90 200 95.7 95.2 94.2 83.5 80.0 71.0 12100
590 N560LL 280 1620 1849 90 200 95.5 95.0 94.0 80.5 77.5 69.5 13300
1485 N500LL 286 1830 820 90 200 96.0 95.5 94.5 87.5 86.5 82.0 (4)

1250 985 N560LL 287 1820 1236 80 200 96.3 95.8 94.8 87.0 83.0 75.5 10600
740 N560LL 301 1820 1645 80 200 95.7 95.2 94.2 83.5 80.0 71.0 12000
1485 N560LL 315 2020 918 90 200 96.0 95.5 94.5 89.0 87.0 83.5 (4)
1400
985 N560LL 322 2020 1384 90 200 96.3 95.8 94.8 87.0 83.0 75.5 10500
1485 N560LL 336 2150 984 90 200 96.0 95.5 94.8 89.5 87.5 84.0 (4)
1500
985 N560LL 343 2150 1483 90 200 96.3 95.8 94.8 87.5 83.5 76.0 10300
1485 N560LL 356 2250 1049 90 200 96.0 95.5 94.5 90.0 88.0 84.0 (4)
1600
985 N560LL 365 2250 1582 90 200 96.3 95.8 94.8 87.5 83.5 76.0 10100
1800 1488 N560LL 401 2550 1178 90 200 96.0 95.5 94.5 90.0 88.0 84.5 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

7 7
8
 MEDIUM VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 3300V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust
(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1480 N400LL 134 860 415 100 200 95.5 95.0 93.5 86.0 83.5 76.5 4600
985 N450LL 135 860 623 100 200 95.8 95.3 93.8 85.0 81.0 73.5 5300
630
740 N500LL 141 860 829 100 200 95.2 94.7 93.7 82.0 78.5 70.0 7400
590 N500LL 147 850 1040 100 200 95.0 94.5 93.5 79.0 74.0 66.5 8200
1485 N450LL 150 960 466 100 200 95.5 95.0 94.0 86.5 84.0 77.0 4300
985 N450LL 153 960 702 100 200 95.8 95.3 93.8 85.0 81.0 73.5 5200
710
740 N500LL 159 950 935 100 200 95.2 94.7 93.7 82.0 78.5 70.0 7300
590 N500LL 164 950 1172 100 200 95.3 94.8 94.0 79.5 74.5 66.5 8100
1485 N450LL 159 1020 492 100 200 95.5 95.0 93.5 86.5 84.0 77.0 4200
985 N500LL 160 1000 742 100 200 95.8 95.3 94.3 85.5 81.5 74.0 6300
750
740 N500LL 167 990 987 100 200 95.2 94.7 93.7 82.5 79.0 70.5 7200
590 N560LL 171 990 1238 100 200 95.5 95.0 94.0 80.5 77.5 69.5 14100
1485 N450LL 169 1080 525 90 200 95.5 95.0 93.5 86.5 84.0 77.0 4100
985 N500LL 171 1060 791 90 200 95.8 95.3 94.3 85.5 81.5 74.0 6200
800
740 N500LL 178 1060 1053 90 200 95.5 95.0 94.2 82.5 79.0 70.5 7100
590 N560LL 182 1060 1321 90 200 95.5 95.0 94.0 80.5 75.5 67.5 13900
1485 N500LL 188 1200 590 80 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

985 N500LL 191 1200 890 90 200 95.8 95.3 94.3 86.0 82.0 74.5 6200
900
740 N560LL 197 1180 1185 90 200 95.7 95.2 94.2 83.5 80.0 71.0 12500
590 N560LL 205 1180 1486 90 200 95.5 95.0 94.0 80.5 77.5 69.5 13700
1485 N500LL 209 1340 656 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

985 N500LL 212 1340 989 90 200 95.8 95.3 94.3 86.0 82.0 74.5 6100
1000
740 N560LL 219 1310 1316 90 200 95.7 95.2 94.2 83.5 80.0 71.0 12400
590 N560LL 228 1310 1651 90 200 95.5 95.0 94.0 80.5 77.5 69.5 13500
1485 N500LL 233 1490 735 80 200 96.0 95.5 94.5 87.5 86.5 82.0 (4)
985 N560LL 234 1490 1107 80 200 96.3 95.8 94.8 87.0 83.0 75.5 10700
1120
740 N560LL 245 1460 1474 80 200 95.7 95.2 94.2 83.5 80.0 71.0 12100
590 N560LL 255 1460 1849 80 200 95.5 95.0 94.0 80.5 77.5 69.5 13300
1485 N500LL 260 1670 820 80 200 96.0 95.5 94.5 87.5 86.5 82.0 (4)
1250 985 N560LL 261 1650 1236 80 200 96.3 95.8 94.8 87.0 83.0 75.5 10600
740 N560LL 274 1650 1645 80 200 95.7 95.2 94.2 83.5 80.0 71.0 12000
1485 N560LL 287 1830 918 80 200 96.0 95.5 94.5 89.0 87.0 83.5 (4)
1400
985 N560LL 292 1830 1384 80 200 96.3 95.8 94.8 87.0 83.0 75.5 10500
1485 N560LL 305 1950 984 80 200 96.0 95.5 94.5 89.5 87.5 84.0 (4)
1500
985 N560LL 311 1950 1483 80 200 96.3 95.8 94.8 87.5 83.5 76.0 10300
1485 N560LL 324 2070 1049 80 200 96.0 95.5 94.5 90.0 88.0 84.0 (4)
1600
985 N560LL 332 2070 1582 80 200 96.3 95.8 94.8 87.5 83.5 76.0 10100
1800 1488 N560LL 364 2330 1178 80 200 96.0 95.5 94.5 90.0 88.0 84.0 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

9 9
10
 MEDIUM VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 3300V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1780 N400LL 133 850 345 100 200 95.5 95.0 93.5 86.5 84.0 77.0 4200
1180 N400LL 136 850 520 100 200 95.6 94.8 93.3 85.0 80.5 73.0 5100
630
885 N450LL 142 840 693 100 200 95.2 94.7 93.7 81.5 78.0 68.5 5600
710 N500LL 146 840 864 100 200 95.0 94.5 93.5 79.5 74.5 67.0 7500
1780 N400LL 150 960 389 100 200 95.5 95.0 93.5 87.0 84.5 77.5 4200
1185 N450LL 152 960 584 100 200 95.8 95.3 93.8 85.5 81.5 74.0 4800
710
890 N500LL 158 940 777 100 200 95.2 94.7 93.7 82.5 79.0 70.5 6700
710 N500LL 163 940 974 100 200 95.0 94.5 93.5 80.0 75.0 67.0 7500
1780 N400LL 158 1000 410 100 200 95.5 95.0 93.5 87.0 84.5 77.5 4100
1185 N450LL 160 1000 616 100 200 95.8 95.3 93.8 85.5 81.5 74.0 4700
750
890 N500LL 166 990 821 100 200 95.7 95.2 93.7 82.5 79.0 70.5 6600
710 N500LL 172 990 1029 100 200 95.3 95.0 94.0 80.0 75.0 67.0 7400
1780 N450LL 168 1070 438 100 200 95.5 95.0 94.0 87.0 84.5 77.5 3700
1185 N450LL 171 1070 658 100 200 95.8 95.3 93.8 85.5 81.5 74.0 4600
800
890 N500LL 177 1050 876 100 200 95.7 95.2 94.2 82.5 79.0 70.5 6600
710 N500LL 184 1050 1097 100 200 95.3 95.0 94.0 80.0 75.0 67.0 7300
1780 N450LL 190 1200 492 90 200 95.5 95.0 94.0 87.0 84.5 77.5 3700
1185 N500LL 191 1200 740 90 200 95.8 95.3 94.3 86.0 82.0 74.5 5600
900
890 N500LL 198 1180 985 90 200 95.7 95.2 94.2 83.0 79.5 71.0 6500
710 N560LL 204 1180 1235 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12700
1780 N450LL 211 1320 547 90 200 95.5 95.0 94.0 87.0 85.0 78.0 3600
1185 N500LL 211 1320 822 90 200 95.8 95.3 94.3 86.5 82.5 75.0 5500
1000
890 N560LL 218 1300 1094 90 200 95.7 95.2 94.2 84.0 80.5 71.5 11400
710 N560LL 226 1300 1372 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12600
1785 N500LL 232 1460 611 85 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)

1185 N500LL 235 1460 921 90 200 96.3 95.8 94.8 86.5 82.5 75.0 5400
1120
890 N560LL 244 1430 1226 90 200 95.7 95.2 94.2 84.0 80.5 71.5 11200
710 N560LL 253 1430 1536 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12400
1785 N500LL 259 1620 682 85 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)

1185 N560LL 260 1600 1027 90 200 96.3 95.8 94.8 87.5 83.5 76.0 9800
1250
890 N560LL 272 1600 1368 90 200 95.7 95.2 94.2 84.0 80.5 71.5 11100
710 N560LL 283 1600 1715 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12200
1785 N500LL 290 1830 764 80 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)

1400 1185 N560LL 291 1830 1151 80 200 96.3 95.8 94.8 87.5 83.5 76.0 9600
890 N560LL 303 1800 1532 80 200 95.7 95.2 94.2 84.5 81.0 72.0 10900
1785 N500LL 311 1950 818 80 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)
1500
1185 N560LL 311 1950 1233 80 200 96.3 95.8 94.8 87.5 83.5 76.0 9400
1785 N560LL 324 2050 873 80 200 96.0 95.5 94.5 90.0 88.0 84.5 (4)
1600
1185 N560LL 330 2050 1315 80 200 96.3 95.8 94.8 88.0 86.5 82.5 9300
1785 N560LL 362 2250 982 80 200 96.0 95.5 94.5 90.5 88.5 85.0 (4)
1800
1185 N560LL 370 2250 1479 80 200 96.3 95.8 94.8 88.5 87.0 83.0 9100
2000 1785 N560LL 403 2550 1091 80 200 96.0 95.5 94.5 90.5 88.5 85.0 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

11 11
12
 MEDIUM VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 4160V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
FULL CURRENT TORQUE POWER FACTOR Maximum
EFFICIENCY
OUTPUT FRAME Down
LOAD FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2
kW SIZE Thrust(3)
RPM LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1780 N400LL 106 680 345 100 200 95.5 95.0 93.5 86.5 84.0 77.0 4200
1180 N400LL 108 680 520 100 200 95.6 94.8 93.3 85.0 80.5 73.0 5100
630
885 N450LL 113 660 693 100 200 95.2 94.7 93.7 81.5 78.0 68.5 5600
710 N500LL 116 660 864 100 200 95.0 94.5 93.5 79.5 74.5 67.0 7500
1780 N400LL 119 760 389 100 200 95.5 95.0 93.5 87.0 84.5 77.5 4200
1185 N450LL 120 760 584 100 200 95.8 95.3 93.8 85.5 81.5 74.0 4800
710
890 N500LL 125 750 777 100 200 95.2 94.7 93.7 82.5 79.0 70.5 6700
710 N500LL 130 750 974 100 200 95.0 94.5 93.5 80.0 75.0 67.0 7500
1780 N400LL 125 810 410 100 200 95.5 95.0 93.5 87.0 84.5 77.5 4100
1185 N450LL 127 810 616 100 200 95.8 95.3 93.8 85.5 81.5 74.0 4700
750
890 N500LL 132 800 821 100 200 95.7 95.2 93.7 82.5 79.0 70.5 6600
710 N500LL 137 800 1029 100 200 95.3 95.0 94.0 80.0 75.0 67.0 7400
1780 N450LL 134 860 438 100 200 95.5 95.0 94.0 87.0 84.5 77.5 3700
1185 N450LL 136 850 658 100 200 95.8 95.3 93.8 85.5 81.5 74.0 4600
800
890 N500LL 141 850 876 100 200 95.7 95.2 94.7 82.5 79.0 70.5 6600
710 N500LL 146 850 1097 100 200 95.3 95.0 94.0 80.0 75.0 67.0 7300
1780 N450LL 150 960 492 90 200 95.5 95.0 94.0 87.0 84.5 77.5 3700
1185 N500LL 152 950 740 90 200 95.8 95.3 93.8 86.0 82.0 74.5 5600
900
890 N500LL 157 950 985 90 200 95.7 95.2 94.2 83.0 79.5 71.0 6500
710 N560LL 161 950 1235 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12700
1780 N450LL 167 1070 547 80 200 95.5 95.0 94.0 87.0 85.0 78.0 3600
1185 N500LL 167 1050 822 90 200 95.8 95.3 94.3 86.5 82.5 75.0 5500
1000
890 N560LL 173 1050 1094 90 200 95.7 95.2 94.2 84.0 80.5 71.5 11400
710 N560LL 179 1050 1372 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12600
1785 N500LL 184 1170 611 80 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)

1185 N500LL 187 1150 921 90 200 96.3 95.8 94.8 86.5 82.5 75.0 5400
1120
890 N560LL 193 1150 1226 90 200 95.7 95.2 94.2 84.0 80.5 71.5 11200
710 N560LL 201 1150 1536 90 200 95.5 95.0 94.0 81.0 78.0 70.0 12400
1785 N500LL 205 1300 682 80 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)

1185 N560LL 206 1270 1027 85 200 96.3 95.8 94.8 87.5 83.5 76.0 9800
1250
890 N560LL 216 1270 1368 85 200 95.7 95.2 94.2 84.0 80.5 71.5 11100
710 N560LL 224 1270 1715 85 200 95.5 95.0 94.0 81.0 78.0 70.0 12200
1785 N500LL 230 1450 764 80 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)

1400 1185 N560LL 231 1430 1151 80 200 96.3 95.8 94.8 87.5 83.5 76.0 9600
890 N560LL 240 1430 1532 80 200 95.7 95.2 94.2 84.5 81.0 72.0 10900
1785 N500LL 246 1550 818 80 200 96.0 95.5 94.5 88.0 87.0 82.5 (4)
1500
1185 N560LL 247 1530 1233 80 200 96.3 95.8 94.8 87.5 83.5 76.0 9400
1785 N560LL 257 1650 873 80 200 96.0 95.5 94.5 90.0 88.0 84.5 (4)
1600
1185 N560LL 262 1630 1315 80 200 96.3 95.8 94.8 88.0 86.5 82.5 9300
1785 N560LL 288 1850 982 80 200 96.0 95.5 94.5 90.5 88.5 85.0 (4)
1800
1185 N560LL 293 1830 1479 80 200 96.3 95.8 95.0 88.5 87.0 83.0 9100
2000 1785 N560LL 319 2050 1091 80 200 96.0 95.5 94.5 90.5 88.5 85.0 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

13 13
14
 HIGH VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 6000V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1485 N450LL 65.6 420 367 100 200 95.0 94.5 93.5 86.5 84.0 77.0 4400
985 N450LL 66.5 420 554 100 200 95.3 94.8 93.8 85.0 81.0 73.5 5400
560
740 N500LL 69.0 420 737 100 200 95.2 94.7 93.7 82.0 78.5 70.0 7500
590 N500LL 71.4 420 924 100 200 95.0 94.5 93.5 79.5 74.5 64.0 8300
1485 N450LL 73.8 470 413 100 200 95.0 94.5 93.5 86.5 84.0 77.0 4300
990 N500LL 74.4 470 620 100 200 95.3 94.8 93.8 85.5 81.5 73.5 6500
630
740 N500LL 77.7 470 829 100 200 95.2 94.7 93.7 82.0 78.5 70.0 7400
590 N560LL 79.3 470 1040 100 200 95.0 94.0 93.0 80.5 77.5 67.5 14400
1485 N450LL 79.2 510 466 90 200 95.3 94.5 93.5 90.5 90.0 87.0 4300
990 N500LL 83.4 510 699 100 200 95.3 94.8 93.8 86.0 82.0 74.5 6400
710
740 N560LL 85.9 510 935 100 200 95.2 94.7 93.7 83.5 80.0 71.0 13000
590 N560LL 89.3 510 1172 100 200 95.0 94.5 93.5 80.5 77.5 67.5 14200
1485 N500LL 86.4 555 492 90 200 95.5 95.5 94.0 87.5 86.5 82.0 (4)

990 N500LL 87.6 555 738 100 200 95.8 95.3 94.3 86.0 82.0 74.5 6300
750
740 N560LL 90.8 555 987 100 200 95.2 94.7 93.7 83.5 80.0 71.0 12900
592 N560LL 93.8 555 1234 100 200 95.0 94.5 93.5 81.0 78.0 68.0 14000
1485 N500LL 92.1 600 525 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

990 N500LL 93.4 600 787 100 200 95.8 95.3 94.3 86.0 82.0 74.5 6200
800
740 N560LL 96.8 600 1053 100 200 95.2 94.7 93.7 83.5 80.0 71.0 12700
592 N560LL 100.0 600 1316 100 200 95.0 94.5 93.5 81.0 78.0 68.0 13900
1485 N500LL 104 670 590 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

900 990 N560LL 105 670 885 100 200 95.8 95.3 94.3 86.0 82.0 74.5 11100
740 N560LL 109 670 1185 100 200 95.5 95.0 93.7 83.5 80.0 71.0 12500
1485 N500LL 115 750 656 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

1000 990 N560LL 116 750 984 90 200 95.8 95.3 94.3 86.5 82.5 75.0 10900
740 N560LL 121 750 1316 90 200 95.5 95.0 93.7 83.5 80.0 71.0 12400
1485 N560LL 126 810 735 90 200 95.7 95.2 94.0 89.5 87.5 84.0 (4)
1120
990 N560LL 129 810 1102 90 200 95.8 95.3 94.3 87.0 83.0 75.5 10700
1485 N560LL 141 920 820 90 200 95.7 95.2 94.0 89.0 87.0 83.5 (4)
1250
990 N560LL 143 920 1230 90 200 95.8 95.3 94.3 87.5 83.5 76.0 10600
1400 1485 N560LL 157 1020 918 80 200 95.8 95.3 94.0 89.5 87.5 84.0 (4)

1500 1485 N560LL 167 1080 984 80 200 96.0 95.5 94.0 90.0 88.0 84.5 (4)

1600 1485 N560LL 178 1150 1049 80 200 96.0 95.5 94.0 90.0 88.0 84.5 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

15 15
16
 HIGH VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 6600V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1485 N450LL 67.1 430 413 100 200 95.0 94.5 93.5 86.5 84.0 77.0 4300
990 N500LL 67.6 430 620 100 200 95.3 94.8 93.8 85.5 81.5 73.5 6500
630
740 N500LL 70.6 430 829 100 200 95.2 94.7 93.7 82.0 78.5 70.0 7400
592 N560LL 72.1 430 1037 100 200 95.0 94.0 93.0 80.5 77.5 67.5 14400
1485 N450LL 72.0 465 466 100 200 95.3 94.5 93.5 90.5 90.0 87.0 4300
990 N500LL 75.8 465 699 100 200 95.3 94.8 93.8 86.0 82.0 74.5 6400
710
740 N560LL 78.1 465 935 100 200 95.2 94.7 93.7 83.5 80.0 71.0 13000
592 N560LL 81.2 465 1168 100 200 95.0 94.5 93.5 80.5 77.5 67.5 14200
1485 N500LL 78.5 505 492 100 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

990 N500LL 79.6 500 738 110 200 95.8 95.3 94.3 86.0 82.0 74.5 6300
750
740 N560LL 82.5 500 987 100 200 95.2 94.7 93.7 83.5 80.0 71.0 12900
592 N560LL 85.3 500 1234 100 200 95.0 94.5 93.5 81.0 78.0 68.0 14000
1485 N500LL 83.8 540 525 100 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

990 N500LL 84.9 530 787 100 200 95.8 95.3 94.3 86.0 82.0 74.5 6200
800
740 N560LL 88.0 530 1053 100 200 95.2 94.7 93.7 83.5 80.0 71.0 12700
592 N560LL 90.9 530 1316 100 200 95.0 94.5 93.5 81.0 78.0 68.0 13900
1485 N500LL 94.2 610 590 100 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

900 990 N560LL 95.6 600 885 100 200 95.8 95.3 94.3 86.0 82.0 74.5 11100
740 N560LL 98.7 600 1185 100 200 95.5 94.8 93.7 83.5 80.0 71.0 12500
1485 N500LL 105 670 656 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)

1000 990 N560LL 106 660 984 90 200 95.8 95.3 94.3 86.5 82.5 75.0 10900
740 N560LL 110 660 1316 90 200 95.5 95.0 93.7 83.5 80.0 71.0 12400
1485 N560LL 114 740 735 90 200 95.7 95.2 93.5 89.5 87.5 84.0 (4)
1120
990 N560LL 118 760 1102 90 200 95.8 95.3 94.3 87.0 83.0 75.5 10700
1485 N560LL 128 830 820 90 200 95.7 95.2 94.0 89.0 87.0 83.5 (4)
1250
990 N560LL 131 840 1230 90 200 95.5 95.3 94.3 87.5 83.5 76.0 10600
1400 1485 N560LL 143 920 918 80 200 95.8 95.3 94.0 89.5 87.5 84.0 (4)

1500 1485 N560LL 153 980 984 80 200 96.0 95.5 94.5 89.5 88.0 84.5 (4)

1600 1485 N560LL 163 1050 1049 80 200 96.0 96.0 94.5 89.5 88.0 84.5 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

17 17
18
 HIGH VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 6600V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust
(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
1785 N450LL 66.7 430 344 100 200 95.0 94.5 93.5 87.0 84.5 77.5 3900
1185 N450LL 67.6 430 518 100 200 95.3 94.8 93.8 85.5 81.5 74.0 4800
630
890 N500LL 70.2 420 689 100 200 95.2 94.7 93.7 82.5 79.0 70.5 6800
710 N500LL 72.5 420 864 100 200 95.0 94.5 93.5 80.0 75.0 64.0 7500
1785 N450LL 75.1 480 387 90 200 95.0 94.5 93.5 87.0 84.5 77.5 3900
1185 N500LL 75.8 480 584 100 200 95.3 94.8 93.8 86.0 82.0 74.5 5900
710
890 N500LL 79.1 480 777 100 200 95.2 94.7 93.7 82.5 79.0 70.5 6700
710 N560LL 80.7 470 974 100 200 95.0 94.5 93.5 81.0 78.0 68.0 13200
1785 N450LL 79.4 510 409 90 200 95.0 94.5 93.5 87.0 85.0 78.0 3800
1185 N500LL 79.6 500 616 90 220 95.3 94.8 93.8 86.5 82.5 75.0 5800
750
890 N500LL 83.5 500 821 90 210 95.2 94.7 93.2 82.5 79.0 70.5 6600
710 N560LL 85.3 500 1029 90 210 95.0 94.5 93.5 81.0 78.0 68.0 13100
1785 N450LL 84.7 540 437 90 200 95.0 94.5 93.5 87.0 85.0 78.0 3700
1185 N500LL 84.9 540 658 90 220 95.3 94.8 93.8 86.5 82.5 75.0 5700
800
890 N560LL 87.5 530 876 90 200 95.2 94.7 93.7 84.0 80.5 71.5 11800
710 N560LL 90.9 530 1097 90 200 95.0 94.5 93.5 81.0 78.0 68.0 12900
1785 N500LL 93.7 600 491 90 200 95.5 95.0 94.0 88.0 87.0 82.5 (4)

1185 N500LL 95.0 600 740 90 220 95.8 95.3 94.3 86.5 82.5 75.0 5600
900
890 N560LL 98.5 590 985 90 200 95.2 94.7 93.7 84.0 80.5 71.5 11600
710 N560LL 101.7 590 1235 90 200 95.0 94.5 93.5 81.5 78.5 68.5 12700
1785 N500LL 104 670 546 90 200 95.5 95.0 94.0 88.0 87.0 82.5 (4)

1000 1185 N560LL 106 660 822 90 200 95.8 95.3 94.3 86.5 82.5 75.0 10100
890 N560LL 109 660 1094 90 200 95.2 94.7 93.7 84.0 80.5 71.5 11400
1785 N500LL 116.6 750 611 90 200 95.5 95.0 94.0 88.0 87.0 82.5 (4)

1120 1185 N560LL 117.6 740 921 90 200 95.8 95.3 94.3 87.0 83.0 75.5 9900
890 N560LL 121.8 740 1226 90 200 95.2 94.7 93.7 84.5 81.0 72.0 11200
1785 N500LL 130 840 682 90 200 95.5 95.0 94.0 88.0 87.0 82.5 (4)
1250
1185 N560LL 130 830 1027 80 200 95.8 95.3 94.3 87.5 83.5 76.0 9800
1785 N560LL 142.5 920 764 80 200 95.5 95.0 94.0 90.0 88.0 84.5 (4)
1400
1185 N560LL 145.3 920 1151 80 200 95.8 95.3 94.3 88.0 84.0 76.5 9600
1500 1785 N560LL 153 980 818 80 200 95.5 95.0 94.0 90.0 88.0 84.5 (4)

1600 1785 N560LL 161.9 1040 873 80 200 95.5 95.0 94.0 90.5 88.5 85.0 (4)

1800 1785 N560LL 182 1170 982 80 200 95.5 95.0 94.0 90.5 88.5 85.0 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

19 19
 HIGH VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 50Hz, 10000V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust
(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
250 735 N400LL 19.9 110 331 100 200 93.7 93.2 92.2 77.5 74.0 64.5 6700
985 N400LL 21.0 125 277 100 200 94.0 93.3 92.8 82.0 77.0 68.0 5900
280
735 N400LL 22.1 120 371 100 200 93.9 93.2 92.2 78.0 74.5 65.0 6600
1480 N400LL 22.7 150 207 100 200 94.3 93.5 92.0 85.0 82.5 75.0 4900
315 985 N400LL 23.4 140 311 100 200 94.3 93.8 92.3 82.5 77.5 68.5 5800
735 N400LL 24.8 140 417 100 200 93.9 93.2 92.2 78.0 74.5 65.0 6600
1480 N400LL 25.6 165 234 100 200 94.3 93.5 92.0 85.0 82.5 75.0 4800
355 985 N400LL 26.0 160 351 100 200 94.3 93.8 92.3 83.5 79.5 72.0 5800
735 N450LL 27.9 155 470 100 200 94.2 93.7 92.7 78.0 74.5 65.0 6500
1480 N400LL 27.0 175 247 100 200 94.5 94.0 92.0 85.0 82.5 75.0 4800
375 985 N400LL 27.2 165 371 100 200 94.8 94.3 92.8 84.0 79.5 72.0 5700
740 N450LL 28.9 160 494 100 200 94.2 93.7 92.7 79.5 76.0 66.5 6400
1480 N400LL 28.8 190 263 100 200 94.5 94.0 92.0 85.0 82.5 75.0 4700
400 985 N450LL 29.1 175 396 100 200 94.6 94.3 92.8 84.0 80.0 72.0 5500
740 N450LL 30.7 170 526 100 200 94.5 94.2 92.7 79.5 76.0 66.5 6200
1485 N400LL 32.1 210 295 100 200 94.7 94.5 93.0 85.5 83.0 76.0 4700
450 985 N450LL 32.7 200 445 100 200 94.6 94.3 92.8 84.0 80.0 72.0 5500
740 N500LL 34.6 190 592 100 200 94.5 94.2 92.7 79.5 76.0 66.5 6200
1485 N450LL 35.4 230 328 100 200 94.8 94.5 93.0 86.0 83.5 76.5 4500
500 985 N450LL 36.0 220 494 100 200 94.8 94.3 93.3 84.5 80.5 73.0 5400
740 N500LL 37.4 210 658 100 200 94.7 94.2 93.2 81.5 78.0 70.0 7600
1485 N450LL 39.6 255 367 100 200 95.0 94.5 93.0 86.0 83.5 76.5 4400
560 985 N500LL 40.3 240 554 100 200 95.0 94.8 93.8 84.5 80.5 73.0 6600
740 N500LL 41.9 230 737 100 200 94.7 94.2 93.2 81.5 78.0 70.0 7500
1485 N450LL 44.5 290 413 100 200 95.0 94.5 93.5 86.0 83.5 76.5 4300
630 990 N500LL 45.0 270 620 100 200 95.1 94.8 93.8 85.0 81.0 73.0 6500
740 N500LL 47.0 260 829 100 200 94.9 94.4 93.7 81.5 78.0 70.0 7400
1485 N500LL 49.4 320 466 90 200 95.3 94.5 93.5 87.0 86.0 81.5 (4)

710 990 N500LL 50.4 300 699 100 200 95.2 94.8 93.8 85.5 81.5 74.0 6400
740 N560LL 51.9 290 935 100 200 95.2 95.0 94.0 83.0 80.0 71.0 13000
1485 N500LL 52.2 340 492 90 200 95.3 95.2 94.0 87.0 86.0 81.5 (4)

750 990 N500LL 53.1 320 738 100 200 95.3 94.8 93.8 85.5 81.5 74.0 6300
740 N560LL 54.8 300 987 100 200 95.2 94.7 93.7 83.0 80.0 71.0 13000
1485 N500LL 55.7 360 525 90 200 95.3 95.0 94.0 87.0 86.0 81.5 (4)

800 990 N560LL 56.6 340 787 100 200 95.4 94.8 93.8 85.5 82.0 74.0 11300
740 N560LL 58.4 320 1053 100 200 95.3 94.7 93.7 83.0 80.0 71.0 12700
1485 N500LL 62.7 405 590 90 200 95.3 95.0 94.0 87.0 86.0 81.5 (4)

900 990 N560LL 63.2 380 885 100 200 95.6 95.0 93.8 86.0 82.0 74.5 11100
740 N560LL 65.7 360 1185 100 200 95.3 95.0 93.7 83.0 80.0 70.5 12500
1485 N560LL 69.5 450 656 90 200 95.5 95.0 94.0 87.0 86.0 81.5 (4)
1000
990 N560LL 70.2 420 984 90 200 95.6 95.3 94.3 86.0 82.0 74.5 10900
1485 N560LL 76.1 495 735 90 200 95.5 95.0 94.0 89.0 87.0 83.5 (4)
1120
990 N560LL 78.0 470 1102 90 200 95.8 95.3 94.3 86.5 82.5 75.0 10700
1250 1485 N560LL 84.7 550 820 90 200 95.7 95.0 94.0 89.0 87.0 83.5 (4)

1400 1485 N560LL 94.9 615 918 90 200 95.7 95.0 94.0 89.0 87.0 83.5 (4)

Note: (1) Above data are typical values and for reference only
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

20 20
 HIGH VOLTAGE MOTOR
TEFC, Vertical Flange-Mounted
3 Phase, 60Hz, 11000V, S.F. 1.0
Class F Insulation, 40℃ Ambient, Continuous Duty
PERFORMANCE DATA
CURRENT TORQUE EFFICIENCY POWER FACTOR Maximum
FULL
OUTPUT FRAME FULL LOCKED FULL LOCKED BREAK FULL 3 / 4 1 / 2 FULL 3 / 4 1 / 2 Down
LOAD
kW SIZE LOAD ROTOR LOAD ROTOR DOWN LOAD LOAD LOAD LOAD LOAD LOAD Thrust
(3)
RPM
(A) (A) (kg-m) (%) (%) (%) (%) (%) (%) (%) (%) (kg)
280 880 N400LL 20.1 110 310 100 200 93.7 93.2 92.2 78.0 74.5 65.0 6100
1180 N400LL 21.4 125 260 100 200 93.8 93.3 92.8 82.5 77.5 68.5 5400
315
880 N400LL 22.5 120 349 100 200 93.7 93.2 92.2 78.5 74.5 65.5 6100
1780 N400LL 23.1 150 194 100 200 94.3 93.5 92.0 85.5 83.0 75.5 4400
355 1180 N400LL 23.8 140 293 100 200 94.2 93.7 92.2 83.0 78.0 69.0 5300
885 N400LL 25.3 135 391 100 200 94.0 93.2 92.2 78.5 75.0 65.5 6100
1780 N400LL 24.4 155 205 100 200 94.3 93.5 92.0 85.5 83.0 75.5 4400
375 1180 N400LL 24.8 150 310 100 200 94.3 93.7 92.3 84.0 80.0 72.5 5300
885 N450LL 26.6 145 413 100 200 94.2 93.7 92.7 78.5 75.0 65.5 5900
1780 N400LL 26.0 165 219 100 200 94.5 94.0 92.0 85.5 83.0 75.5 4400
400 1185 N400LL 26.2 155 329 100 200 94.8 94.3 92.8 84.5 80.0 72.5 5300
885 N450LL 27.9 150 440 100 200 94.2 93.7 92.7 80.0 76.5 67.0 5800
1780 N400LL 29.2 190 246 100 200 94.5 94.0 92.0 85.5 83.0 75.5 4300
450 1185 N450LL 29.5 175 370 100 200 94.6 94.3 92.8 84.5 80.5 72.5 5000
885 N450LL 31.2 170 495 100 200 94.5 94.2 92.7 80.0 76.5 67.0 5800
1780 N400LL 32.2 205 274 100 200 94.7 94.5 93.0 86.0 83.5 76.5 4300
500 1185 N450LL 32.8 195 411 100 200 94.6 94.3 92.8 84.5 80.5 72.5 5000
885 N500LL 34.8 190 550 100 200 94.3 94.2 92.7 80.0 76.5 67.0 7000
1780 N450LL 35.8 230 306 100 200 94.8 94.5 93.0 86.5 84.0 77.0 4000
560 1185 N450LL 36.5 220 460 100 200 94.8 94.3 93.3 85.0 81.0 73.5 4900
890 N500LL 37.9 205 613 100 200 94.7 94.2 93.2 82.0 78.5 70.5 7000
1785 N450LL 40.2 260 344 100 200 95.0 94.5 93.0 86.5 84.0 77.0 3900
630 1185 N500LL 41.0 245 518 100 200 95.0 94.8 93.8 85.0 81.0 73.5 5900
890 N500LL 42.6 235 689 100 200 94.7 94.2 93.2 82.0 78.5 70.5 6800
1785 N450LL 45.4 295 387 100 200 95.0 94.5 93.5 86.5 84.0 77.0 3900
710 1185 N500LL 45.8 275 584 100 200 95.1 94.8 93.8 85.5 81.5 73.5 5900
890 N500LL 47.9 260 777 100 200 94.9 94.4 93.7 82.0 78.5 70.5 6700
1785 N500LL 47.3 305 409 90 200 95.1 94.5 93.5 87.5 86.5 82.0 (4)

750 1185 N500LL 48.0 285 616 100 200 95.3 94.8 93.8 86.0 82.0 74.5 5800
890 N560LL 49.5 270 821 100 200 95.2 94.7 93.7 83.5 80.5 71.5 11900
1785 N500LL 50.5 325 437 90 200 95.1 95.0 94.0 87.5 86.5 82.0 (4)

800 1185 N500LL 51.2 305 658 100 200 95.3 94.8 93.8 86.0 82.0 74.5 5700
890 N560LL 52.8 290 876 100 200 95.2 94.7 93.7 83.5 80.5 71.5 11800
1785 N500LL 56.7 365 491 90 200 95.2 95.0 94.0 87.5 86.5 82.0 (4)

900 1185 N560LL 57.6 345 740 100 200 95.4 94.8 93.8 86.0 82.5 74.5 10300
890 N560LL 59.4 325 985 100 200 95.3 94.7 93.7 83.5 80.5 71.5 11600
1785 N500LL 62.9 410 546 90 200 95.3 95.0 94.0 87.5 86.5 82.0 (4)

1000 1185 N560LL 63.5 380 822 100 200 95.6 95.0 93.8 86.5 82.5 75.0 10100
890 N560LL 65.8 360 1094 100 200 95.5 95.0 93.7 83.5 80.5 71.0 11400
1785 N560LL 70.4 455 611 90 200 95.5 95.0 94.0 87.5 86.5 82.0 (4)
1120
1185 N560LL 71.1 425 921 90 200 95.6 95.3 94.3 86.5 82.5 75.0 9900
1785 N560LL 76.8 495 682 90 200 95.5 95.0 94.0 89.5 87.5 84.0 (4)
1250
1185 N560LL 78.7 475 1027 90 200 95.8 95.3 94.3 87.0 83.0 75.5 9800
1400 1785 N560LL 86.0 560 764 90 200 95.5 95.0 94.0 89.5 87.5 84.0 (4)

1600 1785 N560LL 98.3 640 873 90 200 95.5 95.0 94.0 89.5 87.5 84.0 (4)

Note: (1) Above data are typical values and for reference only.
(2) Performance tolerance is according to IEC 60034-1.
(3) Only for high thrust motors. The allowable maximum down thrust is based on 5 years L-10 bearing life.
(4) High thrust motor is available on request.
(5) Non-reverse ratchet mechanism is available on request for high thrust motors.
ALL DATA ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

21 21
22
23 23
TATUNG Sanhsia Motor Factory Facts
TATUNG Company Founded in 1918
Sanhsia Factory Land Area --- 1,66578 M²
Total MV Motors Produced --- over 30,000
Continuous Production since 1949
Voltage Range --- thru. 13,800 Volts
Test Facility through 15,000 kW --- JEC 2137 or IEEE 112 Method F1
Location --- 352 Shi-tong Rd., Sanhsia, Taipei Hsien 237, Taiwan

TATUNG Company TATUNG Electric Company of America, Inc.

22 Chungshan N. Road, 3rd Sec. Taipei, 104 14381 Chambers Road, Tustin, CA 92780
Taiwan Tel : 1-714-8383293
Tel: 886-2-2599-5429 Fax: 1-714-8383295
886-2-2592-5252 ext. 2403, 2489, 2908 E-mail: sales@tatungelectric.com
Fax: 886-2-2598-4427 Call Toll Free 1-800-828-8641
Email: service@sansha.tatung.com.tw
Web: www.tatung.com

TATUNG(Shanghai) CO., LTD

No. 5299 Beisong Road, Chedun Town
Songjiang District, Shanghai 201611, China
Tel : 86-21-57605299 ext. 159, 206
Fax: 86-21-57605266
Email: export@tatungsh.net
Web: www.tatungsh.com/products TS21FV-0912