6050/6050 FS

Hydraulic Shovel

General Data Operating Weight

Operating weight 6050 FS
Face Shovel 528 tonnes 582 tons Standard track pads 1400 mm 4 ft 7 in
Backhoe 537 tonnes 592 tons Operating weight 527 600 kg 1,163,150 lb
Engine output SAE J1995 Ground pressure 25.9 N/cm 2 37.5 psi
Cummins K1500E 1880 kW 2,520 hp • Other track pads available on request
Cummins QSK38 1880 kW 2,520 hp
6050
Standard bucket capacity
Standard track pads 1400 mm 4 ft 7 in
Face Shovel (heaped 2:1) 26.0 m3 34.0 yd3
Operating weight 537 000 kg 1,183,870 lb
Backhoe (heaped 1:1) 28.0 m3 36.6 yd3
Ground pressure 26.3 N/cm 2 38.1 psi
Features • Other track pads available on request

• TriPower shovel attachment

• Independent oil cooling system
• Spacious walk-through machine house
• 5-circuit hydraulic system
• Electronic-hydraulic servo control
• Board Control System (BCS)
• Torque control in closed-loop swing circuit
• Automatic central lubrication system
• Xenon working lights
6050/6050 FS Hydraulic Shovel Specifications

Diesel Engines Electric Motor – 6050 AC/6050 AC FS

Version 1 – Cummins K1500E Tier 1 Type Squirrel cage
Make and model 2 × Cummins K1500E induction motor
Total rated net power ISO 3046/1 1880 kW 2,520 hp Output 1600 kW
1,800 min-1 1,800 min-1 Voltage 6.6 kV ± 10%
Total rated net power SAE J1349 1880 kW 2,520 hp (other on request)
1,800 min-1 1,800 min-1 Rated current IN 174 A (at 6.6 kV)
Total rated gross power SAE J1995 1880 kW 2,520 hp Frequency 50 Hz (60 Hz on request)
1,800 min-1 1,800 min-1 Revolutions 1,500 min-1
Number of cylinders (each engine) 12 (1,800 min-1 at 60 Hz)
Bore 159 mm 6.25 in Starting current 350% of IN
Stroke 159 mm 6.25 in (197% of IN optional)
Displacement 37.8 L 2,300 in3 • Custom-made electric motor with increased gap between rotor
Aspiration Turbocharged and and stator to withstand severe mining conditions
aftercooled • Power limit control by Pump Management System
Maximum altitude without 2438 m 8,000 ft
deration – above sea level
Electrical System (diesel drive)
Version 2 – Cummins QSK38 Tier 2 System voltage 24V
Make and model 2 × Cummins QSK38 Batteries in series/ 6 × 210 Ah – 12V each
Total rated net power ISO 3046/1 1880 kW 2,520 hp parallel installation 630 Ah – 24V in total
1,800 min-1 1,800 min-1 Alternators 2 × 175A each
Total rated net power SAE J1349 1880 kW 2,520 hp Working spot lights 8 × high-brightness
1,800 min-1 1,800 min-1 Xenon lights
Total rated gross power SAE J1995 1880 kW 2,520 hp • Battery isolation relays
1,800 min-1 1,800 min-1 • Emergency stop switches accessible from ground level,
Number of cylinders (each engine) 12 in engine module and in operator’s cab
Bore 159 mm 6.25 in
Stroke 159 mm 6.25 in
Displacement 37.8 L 2,300 in3
Aspiration Turbocharged and
aftercooled
Maximum altitude without 3200 m 10,500 ft
deration – above sea level
Emissions U.S. EPA Flex
Fuel tank capacity 10 700 L 2,820 gal
• Hydraulically driven radiator fan with electronically controlled
fan speed
• Microprocessed engine control
• Heavy-duty air filters with automatic dust evacuation
• Two-stage fuel filter including water separator
• Additional high-capacity water separator
• Pre-lube starting system
• Eliminator with centrifuge for engine oil filtration

2
 6050/6050 FS Hydraulic Shovel Specifications

Hydraulic System with Pump Managing System Hydraulic Oil Cooling

Main pumps 4 × variable flow axial Oil flow of cooling pumps
piston pumps Diesel version 4 × 488 4 × 129
Maximum oil flow L/min gal/min
Diesel version 4 × 912 4 × 241 AC version 4 × 491 4 × 130
L/min gal/min L/min gal/min
AC version 4 × 933 4 × 246 Diameter of fans 4 × 1170 mm 4 × 46 in
L/min gal/min • Cooling system is fully independent of all main circuits, i.e.
Maximum pressure, attachment 300 bar 4,350 psi controlled cooling capacity is available whenever engine is running
Maximum pressure, travel 340 bar 4,930 psi • Gear-type cooling pumps supplying high-volume, low-pressure oil
Swing pumps to fans and aluminum coolers
• Fan speed and flow of oil to the coolers are thermostatically controlled
Diesel version 4 × reversible swash • Extremely high cooling efficiency to ensure optimum oil temperature
plate pumps
AC version 3 × reversible swash Swing System
plate pumps
Maximum oil flow Swing drives 4 compact planetary
transmissions with axial
Diesel version 4 × 351 4 × 93
piston motors
L/min gal/min
Parking brakes Wet multiple disc
AC version 3 × 491 3 × 131
brake, spring-loaded/
L/min gal/min
hydraulically released
Maximum pressure, swing pumps 350 bar 5,080 psi
Maximum swing speed
Total volume of hydraulic oil
Diesel version 3.8 rpm
Diesel version – approximately 7800 L 2,060 gal
AC version 4.0 rpm
AC version – approximately 7300 L 1,930 gal
Swing ring Triple-race roller bearing
Hydraulic tank capacity with sealed internal gearing
Diesel version – approximately 5500 L 1,450 gal • Closed-loop swing circuit with torque control
AC version – approximately 5000 L 1,320 gal • Hydraulic braking of the swing motion by counteracting control
• Pump Managing System contains: • All raceways of swing ring, as well as grease bath for internal
– Electronic load limit control gearing, supplied by automatic central lubrication system
– Flow on demand from main pumps depending on joystick position
– Automatic regulation of main pumps to zero flow without demand Retractable Service Station
– Automatic rpm reduction of engine speed during working breaks
– Reduced oil flow of main pumps at high hydraulic oil Retractable service station installed underneath the engine
temperature or high engine temperature module and easily accessible from ground. Equipped with:
• Pressure cut-off for main pumps • Quick couplings for:
• Cooling of pump transmission gear oil – Diesel fuel
• Filters: – Engine coolant – left/right
– Full-flow high-pressure filters (100 μm) for the main pumps, – Pump transmission gear oil – left/right
installed directly behind each pump – Engine oil (oil pan) – left/right
– High pressure filters (100 μm) for the closed swing circuit – Engine oil (additional tank – optional) – left/right
– Full-flow filters (10 μm) for the complete return circuit – Hydraulic oil tank
– Pressure filters (40 μm and 6 μm) for servo circuit – Grease container
– Pressure filters (40 μm) for the feed pumps of the closed • Cat® jump-start socket
swing circuit • Indicator lights for fuel tanks left/right full and grease container full
– Transmission oil filters (40 μm)

3
6050/6050 FS Hydraulic Shovel Specifications

Operator’s Cab Automatic Lubrication System

Operator’s eye level – approximately 7.6 m 24 ft 11 in Capacity of grease container 1000 L 264 gal
Internal dimensions • Dual-circuit system with hydraulically driven heavy-duty pump
Length 2200 mm 7 ft 3 in and electronic time relay control to adjust the pause/lube times
Width 1600 mm 5 ft 3 in • Connected to the lubrication system are the swing roller bearing
with internal gearing and all pivot points of attachment, bucket
Height 2150 mm 7 ft 1 in and cylinders
• Pneumatically cushioned and multi-adjustable comfort seat with • System failures displayed by Board Control System
lumbar support, seat heating, safety belt, head and armrests • Grease filters (200 μm) between service station and container,
• Switch in seat cushion to automatically neutralize the hydraulic as well as directly behind grease pump
controls when operator leaves the seat
• Joystick controls integrated in independently adjustable seat consoles Attachments
• Fold-away auxiliary seat with safety belt
• FOPS (rock guard; approved according to DIN ISO 3449) • Booms and sticks are torsion-resistant, welded box design of
integrated into cab structure high tensile steel with massive steel castings at pivot areas
• All-round safety glass, armored windshield and sliding side window • Welding procedures allow for internal counter-welding
• Windshield with parallel intermittent wiper/washer (double prep weld) wherever possible
• Roller blind at windshield • Booms and sticks are stress-relieved after welding
• Robust instrument panel including large colored BCS screen with • Inspection hole in booms
transflective technology • Catwalks with rails at booms
• Board Control System (BCS) electronic monitoring and data • Pressure-free lowering of boom (FS and BH) and stick (FS)
logging system for vital signs and service data of engines, hydraulic by means of a float valve
systems and lubrication systems • Shovel attachment with unique TriPower kinematics ensuring
• Machine access via retractable boarding ladder, hydraulically operated the following main features:
• Emergency ladder mounted to the A-frame – Horizontal automatic constant-angle bucket guidance
– Vertical automatic constant-angle bucket guidance
Undercarriage – Automatic roll-back limiter to prevent material spillage
– Kinematic assistance to hydraulic forces
Travel speeds (2 stages) – Constant boom momentum throughout the entire lift arc
1st stage – maximum 1.6 km/h 0.99 mph – Crowd force assistance
2nd stage – maximum 2.3 km/h 1.44 mph • All buckets (FS and BH) are equipped with a wear package
consisting of:
Maximum tractive force 2576 kN 578,900 lbf
– Special liner material covering main wear areas inside and
Gradeability of travel drives – 50% outside of bucket
maximum – Lip shrouds between teeth
Track pads (each side) 39 – Wing shrouds on side walls
Bottom rollers (each side) 6 – Heel shrouds at bottom edges
• Special wear packages for highly abrasive materials on request
Support rollers (each side) 2 plus a skid plate in
between
Travel drives (each side) 1 planetary transmission
with 2 two-stage axial
piston motors
Parking brakes Wet multiple disc
brake, spring-applied/
hydraulically released
• Cast double-grouser combined pad links with bushings connected
by hardened full floating pins
• All running surfaces of sprockets, idlers, rollers and pad links, as
well as teeth contact areas of sprocket and pad links, are hardened
• Bottom rollers are connected to the automatic lubrication system
• Fully hydraulic, self-adjusting track tensioning system with
membrane accumulator
• Automatic hydraulic retarder valve to prevent over-speed on
downhill travel
• Acoustic travel alarm

4
 6050/6050 FS Hydraulic Shovel Specifications

Dimensions
All dimensions are approximate.
Dimensions and weights of AC machine differ slightly. Separate drawings, dimensions and weights can be provided upon request.

8 10

9 11

14
1
4

O&K

3
2
5

6 12

7 13

1 7600 mm 24 ft 11 in 8 7580 mm 24 ft 10 in
2 2480 mm 8 ft 2 in 9 7350 mm 24 ft 1 in
3 2780 mm 9 ft 1 in 10 8430 mm 27 ft 8 in
4 6460 mm 21 ft 3 in 11 7000 mm 23 ft 0 in
5 1120 mm 3 ft 8 in 12 1400 mm 4 ft 7 in
6 6400 mm 21 ft 0 in 13 7000 mm 23 ft 0 in
7 8540 mm 28 ft 0 in 14 8760 mm 28 ft 9 in

5
6050/6050 FS Hydraulic Shovel Specifications

Working Range – TriPower Face Shovel Attachment (FS)

All dimensions are approximate.

ft m
16
50
15

14
45
13
40 12

11
35
10
30 9

8
25
7
20 6
789D
5
15
4

10 3

2 O&K

5
1

0 0

–1
–5
–2

–10 –3
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m

60 55 50 45 40 35 30 25 20 15 10 5 0 ft

Boom 8.0 m 26 ft 2 in Working Range

Stick 5.1 m 16 ft 9 in Maximum digging height 15.3 m 50 ft 2 in
Digging Forces Maximum digging reach 16.2 m 53 ft 2 in
Maximum crowd force 1930 kN 433,730 lbf Maximum digging depth 2.4 m 7 ft 10 in
Maximum crowd force at ground level 1650 kN 370,800 lbf Maximum dumping height 11.8 m 38 ft 9 in
Maximum breakout force 1530 kN 343,840 lbf Crowd distance on level 5.8 m 19 ft

Face Shovels
Type Iron Ore Shovel Heavy Rock Shovel Heavy Rock Shovel Standard Rock Shovel Light Rock Shovel
Capacity heaped 1:1 21.0 m3 27.5 yd3 24.5 m3 32.0 yd3 26.5 m3 34.7 yd3 30.1 m3 39.4 yd3 32.3 m3 42.2 yd3
Capacity heaped 2:1 18.0 m3 23.5 yd3 21.0 m3 27.5 yd3 23.0 m3 30.1 yd3 26.0 m3 34.0 yd3 28.0 m3 36.6 yd3
Total width 4800 mm 15 ft 9 in 4800 mm 15 ft 9 in 4800 mm 15 ft 9 in 4800 mm 15 ft 9 in 4800 mm 15 ft 9 in
Inner width 4300 mm 14 ft 1 in 4300 mm 14 ft 1 in 4300 mm 14 ft 1 in 4300 mm 14 ft 1 in 4300 mm 14 ft 1 in
Opening width 2250 mm 8 ft 2 in 2500 mm 8 ft 2 in 2500 mm 8 ft 2 in 2500 mm 8 ft 2 in 2500 mm 8 ft 2 in
Number of teeth 6 6 6 6 6
Weight including 40 400 kg 89,070 lb 42 400 kg 93,480 lb 41 800 kg 92,150 lb 42 900 kg 94,580 lb 43 100 kg 95,020 lb
wear package
Maximum material 2.6 t/m3 4,380 lb/yd3 2.2 t/m3 3,710 lb/yd3 2.0 t/m3 3,370 lb/yd3 1.8 t/m3 3,030 lb/yd3 1.65 t/m3 2,780 lb/yd3
density (loose)

6
 6050/6050 FS Hydraulic Shovel Specifications

Working Range – Backhoe Attachment (BH)

All dimensions are approximate.

ft m
65 20
19
60 18
55 17
16
50 15
45 14
13
40 12
35 11
10
30 9
8
25
7
20 6
5
15
4
10 3
2 O&K

5
1
0 0
–1
–5
–2
–10 –3
–4
–15 –5
–20 –6
–7
–25 –8
–30 –9
–10
–35 –11
22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 ft

Boom 10.5 m 34 ft 5 in Working Range

Stick 5.5 m 18 ft 1 in Maximum digging depth 9.2 m 30 ft 2 in
Digging Forces Maximum digging reach 19.5 m 64 ft 0 in
Maximum tearout force 1100 kN 247,200 lbf Maximum digging height 16.8 m 55 ft 1 in
Maximum breakout force 1210 kN 271,920 lbf

Backhoes
Type Heavy Rock Bucket Standard Rock Bucket
Capacity heaped 1:1 25.0 m3 32.7 yd3 28.0 m3 36.6 yd3
3
Capacity heaped 2:1 22.2 m 29.0 yd3 25.0 m 3
32.7 yd3
3
Capacity struck 19.5 m 25.5 yd3 21.7 m 3
28.4 yd3
Total width 4580 mm 15 ft 0 in 4440 mm 14 ft 7 in
Inner width 4035 mm 13 ft 3 in 4040 mm 13 ft 3 in
Number of teeth 6 6
Weight including wear package 30 100 kg 66,360 lb 32 300 kg 72,210 lb
Maximum material density (loose) 2.0 t/m3 3,370 lb/yd3 1.8 t/m3 3,030 lb/yd3

7
6050/6050 FS Hydraulic Shovel Specifications

General Packing List

2 Crawler side frames (values per each side frame)

Gross weight 44 600 kg (98,330 lb)
1 Length 8400 mm (27 ft 7 in) 2
Width 2200 mm (7 ft 3 in)
2 Height 2100 mm (6 ft 11 in) 1

6 Tracks consisting of 13 pad links (values per each track)

Gross weight 10 700 kg (23,590 lb)
1 Length 6400 mm (21 ft 0 in) 2
Width 1400 mm (4 ft 7 in) 1
2 Height 330 mm (1 ft 1 in)

Undercarriage center frame with swing roller bearing

Gross weight 42 300 kg (93,250 lb)
1 Length 6750 mm (22 ft 2 in) 2
Width 3800 mm (12 ft 6 in)
2 Height 2250 mm (7 ft 5 in) 1

Superstructure center frame

Gross weight 62 000 kg (136,690 lb)
1 Length 10 200 mm (33 ft 6 in) 2
Width 3600 mm (11 ft 10 in)
2 Height 3450 mm (11 ft 4 in)
1

Engine module with diesel engines

Gross weight 42 000 kg (92,590 lb)
1 Length 4000 mm (13 ft 1 in)
2
Width 7000 mm (23 ft 0 in)
2 Height 3820 mm (12 ft 6 in)

1
Oil cooler module
Gross weight 9750 kg (21,490 lb)
1 Length 4000 mm (13 ft 1 in) 2
Width 2000 mm (6 ft 7 in)
2 Height 3750 mm (12 ft 4 in)
1

Above values are approximate. Details may vary depending on scope of supply and destination. Exact data subject to selected machine configuration
and final packing list.

8
 6050/6050 FS Hydraulic Shovel Specifications

General Packing List

Cab pedestal module

Gross weight 6800 kg (14,990 lb)
1 Length 3720 mm (12 ft 2 in) 2
Width 2500 mm (8 ft 2 in)
2 Height 3700 mm (12 ft 2 in)
1
Crate with cabin and FOPS
Gross weight 3960 kg (8,730 lb)
1 Length 3500 mm (11 ft 6 in) 2
Width 2600 mm (8 ft 6 in)
2 Height 2870 mm (9 ft 5 in)
1

Counterweights Lower part Upper part

Gross weight 36 000 kg (79,370 lb) 19 300 kg (42,550 lb)
1 Length 1580 mm (5 ft 2 in) 1550 mm (5 ft 1 in) 2
2
Width 7000 mm (23 ft 0 in) 7000 mm (23 ft 0 in)
2 Height 1750 mm (5 ft 9 in) 2360 mm (7 ft 9 in) 1 1

Crates
1 2
Content Length Width Height Gross Weight
Two radiators with fan 2700 mm 1950 mm 1320 mm 2460 kg
(8 ft 10 in) (6 ft 5 in) (4 ft 4 in) (5,420 lb)
Four swing gears 1550 mm 1350 mm 1980 mm 4970 kg
(5 ft 1 in) (4 ft 5 in) (6 ft 6 in) (10,960 lb)
Swing ring cover 2200 mm 1300 mm 1030 mm 400 kg
(7 ft 3 in) (4 ft 3 in) (3 ft 5 in) (880 lb)
Swing ring bolts, tools, accessories 3300 mm 1750 mm 1260 mm 2900 kg
(10 ft 10 in) (5 ft 9 in) (4 ft 2 in) (6,390 lb) 2
Air filters, mufflers and covers 3400 mm 1700 mm 1800 mm 1620 kg
(11 ft 2 in) (5 ft 7 in) (5 ft 11 in) (3,570 lb) 1
Grease container with pump 1630 mm 1570 mm 2160 mm 1100 kg
(5 ft 4 in) (5 ft 2 in) (7 ft 1 in) (2,430 lb)
Barrels (hydraulic oil; grease) 2500 mm 1300 mm 1270 mm 1700 kg
(8 ft 2 in) (4 ft 3 in) (4 ft 2 in) (3,750 lb)
Barrels (hydraulic oil) 2500 mm 1300 mm 2700 mm 1755 kg
(8 ft 2 in) (4 ft 3 in) (8 ft 10 in) (3,870 lb)
Retractable ladder 5600 mm 1000 mm 2000 mm 740 kg
(18 ft 4 in) (3 ft 3 in) (6 ft 7 in) (1,630 lb)

Above values are approximate. Details may vary depending on scope of supply and destination. Exact data subject to selected machine configuration
and final packing list.

9
6050/6050 FS Hydraulic Shovel Specifications

TriPower Shovel Attachment

Boom with TriPower linkages and rods

Gross weight 46 800 kg (103,180 lb)
1 Length 9030 mm (29 ft 8 in) 2
Width 3100 mm (10 ft 2 in)
2 Height 2840 mm (9 ft 4 in) 1

Stick
Gross weight 17 300 kg (38,140 lb)
1 Length 6000 mm (19 ft 8 in) 2
Width 2350 mm (7 ft 9 in)
2 Height 2300 mm (7 ft 7 in) 1

Standard face shovel including pin for stick

Gross weight 43 900 kg (96,780 lb)
1 Length 4600 mm (15 ft 1 in) 2
Width 4800 mm (15 ft 9 in)
2 Height 3950 mm (13 ft 0 in)
1
Bundle with 2 boom cylinders
Gross weight 7100 kg (15,650 lb)
1 Length 5100 mm (16 ft 9 in) 2
Width 1200 mm (3 ft 11 in) 1
2 Height 700 mm (2 ft 4 in)

2 Bundles with 2 stick cylinders and 2 bucket cylinders

(values per each bundle)
Gross weight 5200 kg (11,460 lb)
2
1 Length 4400 mm (14 ft 5 in) 1
Width 1200 mm (3 ft 11 in)
2 Height 700 mm (2 ft 4 in)

Crates with main valve block catwalks, railings and other parts
1 2
Length Width Height Gross Weight
4270 mm (14 ft 0 in) 1900 mm (6 ft 3 in) 1700 mm (5 ft 7 in) 3400 kg (7,500 lb) 2

4950 mm (16 ft 3 in) 2300 mm (7 ft 7 in) 2140 mm (7 ft 0 in) 5700 kg (12,570 lb)
1
2850 mm (9 ft 4 in) 1300 mm (4 ft 3 in) 1020 mm (3 ft 4 in) 870 kg (1,920 lb)
5000 mm (16 ft 5 in) 1950 mm (6 ft 5 in) 1850 mm (6 ft 1 in) 3420 kg (7,540 lb)

Above values are approximate. Details may vary depending on scope of supply and destination. Exact data subject to selected machine configuration
and final packing list.

10
 6050/6050 FS Hydraulic Shovel Specifications

Backhoe Attachment

Monoboom
Gross weight 46 000 kg (101,410 lb)
1 Length 11 500 mm (37 ft 9 in) 2
Width 5000 mm (16 ft 5 in)
2 Height 3200 mm (10 ft 6 in)
1

Stick with linkage and bucket cylinder

Gross weight 28 000 kg (61,730 lb)
1 Length 7700 mm (25 ft 3 in) 2
Width 2300 mm (7 ft 7 in)
2 Height 2750 mm (9 ft 0 in) 1

Standard backhoe bucket including pins for stick and linkage

Gross weight 34 500 kg (76,060 lb)
1 Length 4500 mm (14 ft 9 in) 2
Width 4440 mm (14 ft 7 in)
2 Height 3750 mm (12 ft 4 in)
1
2 pallets with boom cylinders (values per each pallet)
Gross weight 6900 kg (15,210 lb)
1 Length 6250 mm (20 ft 6 in) 2
Width 800 mm (2 ft 7 in) 1
2 Height 900 mm (2 ft 11 in)

2 pallets with stick cylinders (values per each pallet)

Gross weight 4050 kg (8,930 lb)
2
1 Length 5200 mm (17 ft 1 in)
1
Width 800 mm (2 ft 7 in)
2 Height 860 mm (2 ft 10 in)

Crates with main valve block, catwalks, railings and other parts
1 2
Length Width Height Gross Weight 2
3850 mm (12 ft 8 in) 2150 mm (7 ft 1 in) 1550 mm (5 ft 1 in) 5000 kg (11,020 lb)
1
4500 mm (14 ft 9 in) 1900 mm (6 ft 3 in) 1750 mm (5 ft 9 in) 3400 kg (7,500 lb)
4960 mm (16 ft 3 in) 1950 mm (6 ft 5 in) 1840 mm (6 ft 0 in) 3400 kg (7,500 lb)

Above values are approximate. Details may vary depending on scope of supply and destination. Exact data subject to selected machine configuration
and final packing list.

11
6050/6050 FS Hydraulic Shovel

Component Accessibility on Superstructure

1 Diesel Engines
4 4 2 Gearboxes with hydraulic pumps
3 3 Engine radiators with hydraulically driven fan
2 1 4 Oil coolers
5 Hydraulic tank
8 5 6 Swing drives
6 7
9 7 Rotary distributor
8 Travel valves
3 9 Switch cabinet and battery box
2 1
10 Operator’s seat
11
12
11 BCS tower
10 12 Auxiliary seat

Anti-slip catwalks
Anti-slip walking areas

Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
GENERAL • Lubricated pinion for greasing of internal ATTACHMENT
• Export crating gearing of swing ring • Guards for shovel cylinders
• Finishing as per end user’s corporate colors • Various cold-weather packages of FS-attachment
• Xenon lighting on boom
SUPERSTRUCTURE CAB • Special wear packages
• Hydraulic service crane on superstructure • Various heating and air-conditioning
with auxiliary engine systems
• Mesabi radiators instead of standard • Roller blinds at all windows
radiators • Additional instrumentation
• Oil change interval extension for engine
oil up to 1,000 hours UNDERCARRIAGE
• Folding access stairway, stairway angle • Track pad width 1600 mm (5 ft 3 in)
approximately 45° or 1800 mm (5 ft 11 in)
• Round container with a standard • Cover plate under carbody (belly plate)
200 L (53 gal) grease barrel (instead of
1000 L (264 gal) grease container)
Additional optional equipment available on request.

Materials and specifications are subject to change without notice. AEHQ6525-02

Replaces AEHQ6525-01
Featured machines in photos may include additional equipment.
August 2013
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com.

© 2013 Caterpillar Inc.

All Rights Reserved.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and

the “Power Edge” trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
Product ID: 6050/6050 FS