GX61 Residential
Gas Water Heater
FCG - 20
CX61 - 30T25/40T33/50T33/30S25
Promax atmospheric vent.
• Combination thermostat/eco with factory-preset pressure regulator.
• Dynaclean™ diffuser dip tube reduces lime and sediment buildup and
maximizes hot water output. Made from long-lasting PEX cross-linked
polymer.
• Coregard™ anode rod. Our anode rods have a stainless steel core that
extends the life of the anode rod allowing superior tank protection far
longer than standard anode rods.
• Makes lighting the pilot fast and easy with one-hand push-button spark
ignition.
• Factory-installed heat trap nipples for faster installation.
• Blue diamant® glass coating provides superior corrosion resistance
compared to industry standard glass lining.
• Our residential water heaters have a solid brass, tamper resistant,
ball type, drain valve.
• Uses a standard female hose that allows for fast and easy
draining during maintenance.
• Designed for easy operation, this valve includes an integral screwdriver Gas Control
slot that features a 1/4 turn (open/close) radius, which not only permits
fullstraightthrough water but also a quick and positive shut off
(exception: FCG-20 model will have a nylon drain valve).
• Code compliace. complies with NOM-003-ENER-2011
• Eco-Friendly non-CFC foam insulation, external heat traps and specially
designed combustion chamber combine to produce a high Energy
for maximum savings on operating costs.
• CSA and ASME rated T&P valve
• Maximum hydrostatic working pressure 150 PSI
• by ANCE NOM-011-SESH-2012 valve
SAMPLE SPECIFICATION
er sup
ply. Burner to operate on LPG / Natural gas. The heater will be equipped with mechanical gas valve
*For complete warranty information consult the written warranty of American Water Heaters found at www.americanwaterheater.com, or call (800) 999-9515.
Copyright© by American® Water Heaters. All rights reserved. NRGSS01510
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.
GX61 Residential
Gas Water Heater
DRAFT HOOD C
Top View:
HOT CONNECTION
T&P VALVE
ANODE ROD
C
IGNITOR A COLD
B CONNECTION
GAS VALVE
8"
FVG-50T65-4NOV
DRAIN VALVE
INPUT GPH HEIGHT
BTU RECOVERY
PER HR. 90° RISE
GAL. VENT E.F. A B C APPROX.
MODEL NUMBER SERIES CAP. NAT. NAT. DIAM. WEIGHT (Kg)
FCG-20 100 20 22,000 23 3 0.79 44 40,5 16 35
GX61-30T25 100 30 25,000 28 3 or 4 0.83 61 56,5 16 45
GX61-40T33 100 40 33,000 37 3 or 4 0.83 62 57,5 18,5 57
GX61-50T33 100 50 33,000 37 3 or 4 0.83 62 57,5 22 67
Short Models
GX61-30S25 100 30 25,000 28 3 or 4 0.83 47 42,5 18,5 43
Delete “X” in model number for top T&P option, T&P opening on top of the heater with the valve shipped in the box for field installation. Dimensions and specifications subject to
change without notice in accordance with our policy of continuous product improvement. Dimensions on all charts shown in inches. Inlet and outlet are on 8” centers.
GX 61 - 30S25 comes standard with side tap connections for optional hydronic heating loop applications. Plugs are supplied loose and must be installed at installation
if side taps are not used.
Residential gas water heater(s) shall be flammable vapor-resistant models _____________ as manufactured by American Water Heaters, or an approved equal, and
shall have a ______ -year limited tank warranty and a ______-year limited parts warranty, when installed in a residential application. The heater shall be equipped with
a flammable vapor-resistant combustion system that includes an integral flame trap and a piezo electric igniter. The heater must be tested for lint buildup resistance.
to ANSI Z21.10.1-CSA 4.1 Standards governing storage-type water heaters. Heaters shall comply with California Air District management requirements of less than 10
(NAECA) of 1992 and current edition of ASHRAE/IESNA 90.1. The interior of the storage tank shall be lined with a baked-on Fused Ceramic Shield tank lining, fused to the
tank at 1600°F, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be furnished with an internal anode for cathodic protection. The
unit must be equipped with a combination gas control thermostat. A corrosion-resistant brass drain valve shall be provided on the front of each unit. The tank shall be
totally encased in a steel jacket, painted and insulated with a non-CFC foam to reduce standby heat loss.
Distributed By:
Order Entry and Sales Warranty and Service
500 Princeton Road (FEDEX, UPS) 500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030 Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing) P.O. Box 1597 (Mailing)
Johnson City, TN 37602-4808 Johnson City, TN 37605-1597
(800) 937-1037 (800) 999-9515
FAX (800) 581-7224 FAX (800) 999-5210
NRGSS01510
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.
