Scribd
Upload
2K views2 pages

Lubecut 2300 Ea

The document describes LUBECUT 2300 EA, a blue, water-soluble semi-synthetic metalworking coolant. It can be used for grinding at 3-5%, turning/milling/boring at 5%, and tapping/drilling at 5-7%. It is compatible with cast iron, mild steel, forged steel, and some stainless steels and aluminums. The coolant has a long sump life, no odors, excellent cleaning, and is biocide-free and bio-stable. Proper mixing and concentration monitoring are recommended for optimal performance.

Uploaded by

Sai Kiran Muppa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Lubecut 2300 Ea

The document describes LUBECUT 2300 EA, a blue, water-soluble semi-synthetic metalworking coolant. It can be used for grinding at 3-5%, turning/milling/boring at 5%, and tapping/drilling at 5-7%. It is compatible with cast iron, mild steel, forged steel, and some stainless steels and aluminums. The coolant has a long sump life, no odors, excellent cleaning, and is biocide-free and bio-stable. Proper mixing and concentration monitoring are recommended for optimal performance.

Uploaded by

Sai Kiran Muppa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LUBECUT 2300 EA

Semi Synthetic Coolant

Description
• Blue colour
• Water soluble Semi Synthetic
• Low oil content
• Bio-stable

Application
• Grinding 3%-5%
• Turning, Milling, Boring 5%
• Tapping, Drilling 5%-7% (Post Recommendation)

Material Compatibility
• Cast Iron
• Mild Steel
• Forged Steel
• Select grades of Stainless Steel
• Select grades of Aluminium

Water Compatibility
• Typical 50 to 500 ppm hardness (Calcium Carbonate)
• Low foam in low hardness water
• Suitable for high pressure CNC, VMC and grinding machines

Advantages
• Long sump life
• No bad odour even after long machine closures
• Excellent cleaning property and better visibility
• Biocide free and Bio-stable

Address: Gat No.1163/1 (Old 1490), Mulkhed Road,At Post-Ghotawade,Taluka-Mulshi,Dist-Pune-


412111, Maharashtra, India Email: prataptex@gmail.com Web: www.pratapchem.com
Free From Added
 Biocides
 Sulphur EP
 Chlorine EP
 Phosphorus EP
 Sodium Nitrite
 Silicon Oil Defoamers
 Phenolic Couplers
 Nonyl Phenol and NP Ethoxylates

TYPICAL PHYSICAL PROPERTIES


1. Appearance: Blue Clear Fluid
2. Specific Gravity: 0.99-1.02
3. Ph Of 5% Emulsion: < 9.4
4. Refractometer Factor: 1.4
5. Mineral Oil Content: <10-30%
6. IP 287 Corrosion Test: 2% BP
7. Defoaming (5% in 50 ppm): Nil (30 Seconds)

PRODUCT MIXING
PTCPL advise the use of automated mixing systems. Mixing manually, always add the
concentrate to the water with maximum agitation, if water is added to the concentrate, the
emulsions may prove unstable. Avoid mixing with very cold concentrate or water. Check
emulsion strength using a calibrated refractometer. Details of where to purchase equipment
and how to use it are available from the PTCPL Technical Department.

PRODUCT MANAGEMENT
The working concentration should be carefully controlled and monitored on a daily basis as
higher and lower working concentrations have health and safety implications. Machines
should be cleaned out regularly. Fluid and particulate contaminants should be kept to a
minimum. This is important especially in terms of bacterial control and is in line with the
latest advice from government and professional sources. Detailed reference sources are
given in the MSDS.

Address: Gat No.1163/1 (Old 1490), Mulkhed Road,At Post-Ghotawade,Taluka-Mulshi,Dist-Pune-


412111, Maharashtra, India Email: prataptex@gmail.com Web: www.pratapchem.com

You might also like