Scribd
Upload
473 views1 page

V 40 BR2

The document summarizes information about the Vario Clamp self-locking adjustable opening angle clamp. It provides details about ordering including the type, clamp arm version, sensing system, and opening angle. It also lists specifications for the clamp including holding torque, clamping moment, piston diameter, and weight for the V/V2 40 BR2 type. Tolerances for dowel and threaded holes are provided, as well as information on medium, maximum pressure, and permitted operation with oil-free air.

Uploaded by

karthikeyan1992
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
473 views1 page

V 40 BR2

The document summarizes information about the Vario Clamp self-locking adjustable opening angle clamp. It provides details about ordering including the type, clamp arm version, sensing system, and opening angle. It also lists specifications for the clamp including holding torque, clamping moment, piston diameter, and weight for the V/V2 40 BR2 type. Tolerances for dowel and threaded holes are provided, as well as information on medium, maximum pressure, and permitted operation with oil-free air.

Uploaded by

karthikeyan1992
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Vario Clamp V/V2 40 BR2

self-locking type, stepless adjustable opening angle 10°-135°


V 40 BR2 V2 40 BR2

M6/10 deep
Tolerance at
M6/10 deep

80 mm from
pivot point
(corresponds
to an angle
tolerance of
± 10’ to A).

A11
Clamp arm
A10
versions:
A12

Without clamp arm: A00

Ordering example:
V 40 BR2 A10 T12 105°

V 40 BR2: Type
A10: Clamp arm version
T12: Sensing system
105°: Opening angle

Ordering example Tünkers sensing system:


…T00 Without sensing system
…T12 Inductive switch 24 V, 1 output *Tolerance for dowel holes ± 0.02, for
with integrated LED’s threaded holes ± 0.1.
…T52 Without sensing system, Medium: air, max. 8 bar, operation permitted
prepared for T12 sensing with oil-free air.

Type Holding torque Clamping moment Piston Weight


max. at 5 bar Ø ~ (kg)
V/V2 40 BR2 380 Nm 120 Nm 40 2

P0011083.EN.DOC.TATA 20.02.2013 Subject to technical modifications.

www.tuenkers.de ♦ Tel.: +49 2102 4517-0

You might also like