JSS-2150(NBDP option)

MF/HF radio equipment

*Data Terminal is a part of NBDP option.

– the newly designed 150W MF/HF radio equipment delivers enhanced performance and stability

3.8−inch high visibility display

Standard 6 channel DSC built-in
Digital audio and integrated speaker
Easy operation with JOG dial
Telex communication available with NBDP option
 MF/HF radio equipment
– performance features
Unique features
The new JSS-2150 Class A MF/HF radio equipment
features an intuitive user interface and advanced
modular design that allows for a flexible installation
approach in confined spaces.

6-channel DSC built-in

The MF/HF has a 6-channel Digital Selective Calling (DSC) as
standard with a built-in DSC watch-keeping receiver. You can
generate and receive digital selective calls for quick and efficient
establishment of distress, urgency, safety and routine
communication with other ships and coast stations.

In urgent situations, the JSS-2150 sends a distress alert once you

press the distress button. The integrated DSC watch-keeping
receiver monitors distress alarms through continuous scanning
of distress frequencies.

Digital audio
The MF/HF integrates an advanced digital audio amplifier with a
built-in speaker, which increases the amount of power, making your
message loud and clear.

Setting your settings

The JSS-2150 controller uses a 3.8-inch high visibility LCD display,
which you can adjust at your own convenience. The display has 10
dim settings and you can set the contrast up to 11 different levels,
integrated screensaver and assign a commonly used menu to the
user key for direct access. These are just a few of the possibilities.

Telex Communication (option)

JSS-2150 can correspond to the TELEX communication by
equipping it with NBDP option. NBDP option is composed
of data terminal, keyboard, printer and cables. The data
terminal uses a 10.4-inch high-visibility color LCD and
preset color patterns of our marine navigation equipment.
It is also possible to design an original color pattern.
Communication messages can be exchanged with PC by
USB memory.

Distress alerts
The JSS-2150 includes a prominent distress button,
with features to prevent accidental activation.
When in distress, you can send a DSC message
instantly, transmitting your MMSI, position, time of
position and nature of distress, enabling an
immediate response for search and rescue efforts.

JSS-2150 M F / H F – c r u c i a l fo r e n s u r i n g t h e e a
 MF/HF radio equipment
– developed for maximum ease of use
Unified design
The new controller design allows you to carry out all operations simply by using the same unified keyboard
layout as found in JRC’s VHF radiotelephone. The keyboard is solid and responsive, which allows for precise
operation. The keys are also backlit, making it easy to operate in low-light settings on the bridge.

Status of DSC
Continuous wave mode

Turn on/off speaker

Switch TX power
high and low

Direct access to
defined menu

Easy JOG dial operation

(rotate and push)

Volume control

Simple operation
The compact design of the JSS-2150 controller incorporates an intuitive interface, providing
enhanced ergonomics and user friendliness. The logic of the push buttons and JOG dial
operation and excellent on-screen menus will greatly shorten most users’ learning period.

Self-diagnosis
With JRC’s MF/HF radio equipment you can perform self-diagnosis checks on the
controller and transceiver, allowing for easy maintenance and more reliability. The
results are directly shown on the screen, you can save as a log (up to 10 possible) or
print the results (with optional printer).

JRC StarNetwork™
JRC has been providing sales and support of products since 1915. Today,
JRC offers comprehensive assistance through its organisation, in partnership JRC one-call™
with a worldwide StarNetwork™ of over 270 fully trained and qualified
partners and agents, assisting you 24 hours a day, 7 days a week and 365 One number to call
days a year. With JRC you can go anywhere and
if you need our support, simply call us
at +81 3 3492 9201, anytime.

a s e o f e f fe c t i ve co m m u n i c at i o n
MF/HF radio equipment
– system flexibility
Connect a remote control
Getting a second operation panel onboard is easy. Connect the controller to the
transceiver and position the controller at a secondary location on the ship. The
second MF/HF station is fully operable and you can transfer saved channel data
to optimise your operation. Optional NBDP can be connected up to two by
suiting it to the number of controllers.

Flexible interfacing
Besides connecting a NBDP option and GPS, you can connect the MF/HF to the Remote
Maintenance System (RMS1), a system that transmits a variety of information via satellite to
shore, to remotely perform maintenance and management checks – significantly reducing
down time and service miscarriage by failure analysis.
1
JRC (S-) VDR and Fleet 77 or FB500 must be installed onboard in order to take advantage of JRC's RMS

What’s standard in the box?

1. Controller2 Which cables?
2. Handset3 Controller to transceiver 5m
3. Transceiver Antenna tuner to transceiver 5m
4. Antenna tuner
2
5. Cables excluding bracket
3
6. Manual incliding cradle

NBDP option Which cables?

1. Data terminal4 Controller to Data terminal(signal) 1.5 m
2. Keyboard Controller to Data terminal(power) 2.3 m
Data terminal to Keyboard 1.7 m
3. Printer Data terminal to Printer(signal) 1.6 m
4. Cables Transceiver to Printer(Power) 4.0 m
4
excluding bracket

Configration Rx/WKR
antenna
JQD-69C Tx antenna
Joint box
NQW-261
Handset RG-12/UY NFC-2150 Lead wire
NCM-2150 NTD-2150 Antenna TH-7/1.6
Controller Transceiver RX/WKR ANT tuner TX ANT
7ZCJD
0343 TTYCS- 4
（5m） DPYC-2.5 RG-10/UY

TX ANT

TTYCYS-4
NQD-2250 NQD-2253
Connection Junction
box box

7ZCJD0419 7ZCJD0388 DPYC-10

24V DC
NDZ-227 NBD-2150
Data terminal TTYCS-1 AC/DC Power supply

DPYC-16
100V/220V AC
7ZCJD0348
50/60Hz 1φ
7ZCJD0347
NDF-369
Keyboard

NBB-724 7ZCJD0349 24V DC

Battery charger 200Ah

7ZCSC0205A 6JNKD00100B

TTYCS- 4 TTYCS- 1
GPS
DPYC-2.5
MPYCS- 7
NCH-321A DMC
TTYCS- 1
RMS (VDR)
NKG-800 TTYCS- 4 Bold Line：Standard
Printer Expansion controller AME
Dot line：NBDP Option
*NKG-91/DPU-414 can be connected to controllers being without NBDP option.
MF/HF radio equipment
– dimensions and mass

Dimension drawings - Controller Dimension drawings - Handset

NCM-2150 Mass 1,3 kg NQW-261 Mass 0,5 kg
70 mm

142 mm
205 mm
WHEN IN DISTRESS, PRESS
THIS BUTTON UNTIL BEEP
SOUNDS CONTINUOUSLY.

237 mm

238.4 mm 114 mm

cutout for panel mount

height 122 mm, width 220 mm, depth 180 mm

*bracket is option

Dimension drawings - Transceiver Dimension drawings - Antenna tuner

NTD-2150 Mass 13 kg NFC-2150 Mass 3,3 kg

386 mm 430 mm

349 mm 143 mm
256 mm 100 mm

Dimension drawings - Data Terminal Equipment, Keyboard, Printer

NDZ-227 Mass 2,0 kg NDF-369 Mass 0,4 kg

132 mm
286mm

282 mm
358.4 mm 150 mm
*bracket is option
NKG-800 Mass 3,7 kg

153 mm

380 mm 376 mm
 MF/HF radio equipment
– specifications
Name MF/HF Radio Equipment
Model JSS-2150
IMO compliant v
General
Display 3.8-inch, LED backlit, 320 by 240 pixels
Communication speed 57.6 kbps
Microphone input -54 dBm
Rated audio output speaker (8Ω): ≤5W, handset (150Ω): 1 mW or more
Frequency transmit 1605.0 to 27500.0 kHz (100 Hz steps)
Frequency receive 90.0 to 29999.9 kHz (100 Hz steps)
Emission type J3E, F1B, A1A, H3E, H2B, J2D
Channels up to 400 (20 ch x 20 groups)
ITU preset channels 1722 ch
Channel switching time ≤15 sec
Communication method push-to-talk (simplex, semi-duplex)
Antenna impedance 50Ω
Interface IEC61162-1 (GPS, RMS), NMEA0183
NMEA version 1.5, 2.0, 2.3
NMEA input GGA, GLL, RMC, GNS, ZDA
Power supply 21.6 to 31.2V DC
Power consumption 150W transmit: ≤30A, receive: ≤5A
Operating temperature −15 to 55°C (parts exposed to condensation −25 to 55°C)
Storage temperature −15 to 55°C (parts exposed to condensation −25 to 70°C)
Operating humidity 0% to 93% non-condensing
Protection rate IP22 (controller)
Transmitter
Antenna output power 1605.0 to 3999.9 kHz: 100Wpep
4000.0 to 27500.0 kHz: 150Wpep
Modulation method low-power stage balanced modulation
Occupied bandwidth J3E, J2D, H2B: within 3 kHz, F1B, A1A: within 0.5 kHz
Receiver
Receiving system double superheterodyne
Intermediate frequency 70.036 MHz, 36 kHz
Frequency stability within ±10 Hz
Sensitivity J3E: ≤2.5 uV, F1B: ≤0.7 uV, A1A: ≤1.4 uV
Clarifier variable range ±200 Hz (1 Hz steps)
Line output 0 dBm 600Ω (balanced)
Optional items
Power supply (AC/DC) NBD-2150
Battery charger NBB-724
Controller (max 2 in configuration) NCM-2150
Mounting bracket for controller (flush) MPBC42957
Mounting bracket for controller (table) MPBX44354
Connection box (for second controller) NQD-2250
NBDP option (max 2set) NDZ-227＋NDF-369＋NKG-800＋7ZCJD0388＋7ZCJD0419+7ZCSC0205A＋6JNKD00100B
Mounting bracket for data terminal (table) MPBP31721
Waterproof handset (IP66) NQW-261
Printer (wall, flush mount) NKG-911
Printer (desktop type) DPU-4141, NKG-800
Junction box (for antenna tuner) NQD-2253
1
JRC has several antenna solutions available As for this printer, use as the NBDP printer is not admitted.

2011.1 2011.1 CAT.No.Y14-212（No.839-3-3）D Printed in Japan