Scribd
Upload
91 views1 page

1 Administration Building

This document is a fire extinguisher inspection checklist for an administration building. It lists the locations of various fire extinguishers throughout the building and includes an inspection checklist to ensure the extinguishers are properly maintained and in working order. The checklist verifies that the extinguishers are supported securely, accessible, have clear signage and instructions, are fully charged, not damaged, have intact hoses and seals, and are at the proper pressure range. Any issues noted during inspection are recorded in the remarks section.

Uploaded by

Cirilo G. Amigo Jr.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
91 views1 page

1 Administration Building

This document is a fire extinguisher inspection checklist for an administration building. It lists the locations of various fire extinguishers throughout the building and includes an inspection checklist to ensure the extinguishers are properly maintained and in working order. The checklist verifies that the extinguishers are supported securely, accessible, have clear signage and instructions, are fully charged, not damaged, have intact hoses and seals, and are at the proper pressure range. Any issues noted during inspection are recorded in the remarks section.

Uploaded by

Cirilo G. Amigo Jr.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

FIRE EXTINGUISHER INSPECTION CHECKLIST

Area: ADMINISTRATION BUILDING Date of Inspection: _________________________________

Location GM’S PURCHASING CHIEF


ACCOUNTANT’S
OUTSIDE IT OFFICE ADMIN ACCTG/ HR OFFICE
OFFICE OFFICE CASHIER CONF AUDIT
OFFICE
ROOM AREAS
Type of Chemical
Capacity
Date serviced/refilled
INSPECTION CHECKLIST Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No
1. Well supported in
hangers or brackets?
2. Accessible?

3. Location sign clear?

4. Class marking clear?

5. Operating instructions
clear?
6. Is fully charged? (the
weight enough)
7. Cylinder not damaged or
corroded?
8. Hose not damaged &
obstructed?
9. Ring in place?

10. Seal intact?

11. Pressure within range?


(for FE’s with gauge)
Remarks

Notes: Indicate N/A if not applicable. Clean FE after inspection. “GL” – Ground Level “2L” – 2nd Level Items # 11 & 12 not applicable for CO2 type FE

Inspected by: ___________________________________ Noted by: _________________________________________


Utility personnel Safety Officer

1 | A d m i n i s t r a ti o n B u i l d i n g

You might also like