Scribd
Upload
1K views1 page

P-09A Section Detail

This document provides a detail of a gypsum wall partition that runs from the concrete ceiling slab to the floor. It includes two layers of 15mm gypsum boards attached to 70mm steel studs spaced 600mm apart with 50mm thick glass fiber insulation. Rubber bearings and acoustic sealant are placed between the wall and ceiling/floor to reduce sound transmission and isolate vibrations, providing an estimated STC rating of 42.

Uploaded by

khalid hussein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

P-09A Section Detail

This document provides a detail of a gypsum wall partition that runs from the concrete ceiling slab to the floor. It includes two layers of 15mm gypsum boards attached to 70mm steel studs spaced 600mm apart with 50mm thick glass fiber insulation. Rubber bearings and acoustic sealant are placed between the wall and ceiling/floor to reduce sound transmission and isolate vibrations, providing an estimated STC rating of 42.

Uploaded by

khalid hussein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CONCRETE CEILING SLAB

ANCHOR BOLT

ACOUSTIC SEALANT

RUBBER BEARING 1 X 15MM USG BORAL GYPSUM BOARD


UNDERLAY 5MM THICK
70MM 25GA. STEEL STUDS 600MM O.C.
50MM GLASS FIBER INSULATION 24 KG/M3
1 X 15MM USG BORAL GYPSUM BOARD

1 LAYER 15MM GYPSUM


BOARD

STEEL STUD 70MM


THICK 600MM O.C.
MAX.
STC 42
GLASS FIBER INSULATION
24 KG/M3 DENSITY - 50MM
THIK

1 LAYER 15MM GYPSUM


BOARD

RUBBER BEARING
UNDERLAY 5MM THICK

ACOUSTIC SEALANT

DATE: 28/08/17 P-09A GYPSUM WALL PARTITION FLOOR TO CEILING SLAB


DETAIL: 1

You might also like